General expressions for heat distribution, pressure, and current density in argon welding arcs

• Published in: IOP conference series. Materials Science and Engineering Vol. 1281; no. 1; pp. 12007 - 12016
• Main Authors: Villarreal-Medina, R., Delgado-Álvarez, A., Murphy, A. B., Méndez, P. F., Ramirez-Árgaez, M. A.
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.05.2023
• Subjects: Arc deposition; Argon; Conduction heating; Consumable electrode welding; Electric arcs; Energy consumption; Gas tungsten arc welding; Heat distribution; Metamodels; Numerical models; Ohmic dissipation; Optimization; Resistance heating; Weld metal pool; Wire
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/1281/1/012007

Abstract In welding and wire-arc additive manufacturing (WAAM), a mobile arc is the heat source that enables the deposition of metals and the resulting properties of the final product. Because the arc involves temperatures of 20 000 K, and gas velocities of the order of 300 m/s, there are only a few experiments and models available to determine optimal, or at least acceptable, parameters for the operation such as current, voltage, and arc length. On the other hand, there is a lack of engineering guidance to optimize the processes resulting in costly and time-consuming trial-and-error optimization methods, which also involve wasteful use of energy and scrap parts. In this work, a numerical model of the gas-tungsten arc welding (GTAW) arc was created and validated against experiments. The model considers the arc interactions between a non-consumable electrode and the weld pool and accounts for multiple coupled heat transfer mechanisms: Joule heating, conduction, advection, radiation, and Thomson effect. The conditions considered cover the vast majority of GTAW welding operations. The results are generalized in the form of engineering expressions suitable to be embedded in metamodels, in which the heat source is just a part. Applications include penetration and width of welds and deposition rate in external-wire WAAM.