Corrosion behaviour of dc magnetron sputtered Fe1−xMgx alloy films in 3wt% NaCl solution

• Published in: Corrosion science Vol. 49; no. 11; pp. 4276 - 4295
• Main Authors: Berziou, C., Remy, K., Billard, A., Creus, J.
• Format: Journal Article
• Language: English
• Published: 01.11.2007
• ISSN: 0010-938X
• DOI: 10.1016/j.corsci.2007.04.008

Fe1-xMgx alloy films (with x43.4at.% Mg) were deposited by dc magnetron sputtering onto glass slide substrates. The objective of this study was to characterise the corrosion properties of these alloys in saline solution for application as new friendly environmentally sacrificial coatings in the protection of steel structures. The morphological and structural properties of the alloys were systematically studied prior to electrochemical experiments, and then the degraded surfaces were analysed to determine the composition and nature of corrosion products. Alloys with < 25 at.% Mg were single-phase body-centred cubic (bcc) with enlarged lattice parameters, whereas for magnesium contents above 25at.%, amorphisation occurred. The reactivity of the alloys in saline solution is strongly dependent on the Mg content and the alloy structure. The incorporation of magnesium leads to an open circuit potential shift of the alloy towards more negative values, that confers an attractive interest of these alloys as sacrificial coatings. A transition in corrosion activity is observed at 25at.% Mg from which the reactivity decreases with the magnesium content increase. The evolution of the alloy corrosion behaviour is discussed in terms of structural and corrosion products evolution versus magnesium content.