UTILIZAÇÃO DA NITRETAÇÃO SOB PLASMA COMO PRÉ-TRATAMENTO AO REVESTIMENTO TiN-PVD NA GERAÇÃO DE SUPERFÍCIES DÚPLEX NO AÇO AISI H13
Coating adhesion on hot work tool steels type AISI H13 after plasma pre-nitriding treatment is studied. Nitriding treatments were carried out at 520°C using different gas mixtures and time. After plasma nitriding surfaces were TiN coated by PVD. Adhesion was evaluated using Daimler-Benz indentation...
Saved in:
Published in | Tecnologia em metalurgia, materiais e mineração Vol. 5; no. 3; p. 179 |
---|---|
Main Authors | , , |
Format | Journal Article |
Language | Portuguese |
Published |
Sao Paulo
Associação Brasileira de Metalurgia, Materiais e Mineração
01.01.2009
|
Subjects | |
Online Access | Get full text |
Cover
Loading…
Summary: | Coating adhesion on hot work tool steels type AISI H13 after plasma pre-nitriding treatment is studied. Nitriding treatments were carried out at 520°C using different gas mixtures and time. After plasma nitriding surfaces were TiN coated by PVD. Adhesion was evaluated using Daimler-Benz indentation method. Critical failure loads (LC) were determined for coating cracking (LC1) and coating delamination (LC2). Coating adhesion is dependent on the mechanical properties of the pre-nitrided surface close to the interface. Adhesion increases when the H/E ratio and the degree of elastic recovery of the plasma nitrided case become close to that of TiN. |
---|---|
ISSN: | 2176-1515 2176-1523 |
DOI: | 10.4322/tmm.00503010 |