Harnessing Electrical Power from Vortex-Induced Vibration of a Circular Cylinder

• Published in: arXiv.org
• Main Authors: Soti, Atul Kumar, Thompson, Mark C, Sheridan, John, Bhardwaj, Rajneesh
• Format: Paper Journal Article
• Language: English
• Published: Ithaca Cornell University Library, arXiv.org 05.12.2017
• Subjects: Circular cylinders; Coils; Computational fluid dynamics; Damping ratio; Electric generators; Electric wire; Fluid flow; High Reynolds number; Incompressible flow; Laminar flow; Physics - Fluid Dynamics; Reynolds number; Robustness (mathematics); Two dimensional flow; Vortex-induced vibrations
• ISSN: 2331-8422
• DOI: 10.48550/arxiv.1712.01588

The generation of electrical power from Vortex-Induced Vibration (VIV) of a cylinder is investigated numerically. The cylinder is free to oscillate in the direction transverse to the incoming flow. The cylinder is attached to a magnet that can move along the axis of a coil made from conducting wire. The magnet and the coil together constitute a basic electrical generator. When the cylinder undergoes VIV, the motion of the magnet creates a voltage across the coil, which is connected to a resistive load. By Lenz's law, induced current in the coil applies a retarding force to the magnet. Effectively, the electrical generator applies a damping force on the cylinder with a spatially varying damping coefficient. For the initial investigation reported here, the Reynolds number is restricted to Re < 200, so that the flow is laminar and two-dimensional (2D). The incompressible 2D Navier-Stokes equations are solved using an extensively validated spectral-element based solver. The effects of the electromagnetic (EM) damping constant xi_m, coil dimensions (radius a, length L), and mass ratio on the electrical power extracted are quantified. It is found that there is an optimal value of xi_m (xi_opt) at which maximum electrical power is generated. As the radius or length of the coil is increased, the value of xi_opt is observed to increase. Although the maximum average power remains the same, a larger coil radius or length results in a more robust system in the sense that a relatively large amount of power can be extracted when xi_m is far from xi_opt, unlike the constant damping ratio case. The average power output is also a function of Reynolds number, primarily through the increased maximum oscillation amplitude that occurs with increased Reynolds number at least within the laminar range, although the general qualitative findings seem likely to carry across to high Reynolds number VIV.