High Surface Area Stainless Steel Brushes as Cathodes in Microbial Electrolysis Cells

• Published in: Environmental science & technology Vol. 43; no. 6; pp. 2179 - 2183
• Main Authors: Call, Douglas F, Merrill, Matthew D, Logan, Bruce E
• Format: Journal Article
• Language: English
• Published: Washington, DC American Chemical Society 15.03.2009
• Subjects: Applied sciences; Bacteria - metabolism; Bioelectric Energy Sources; Cells; Electrodes; Electrolysis - instrumentation; Electrolysis - methods; Energy and the Environment; Energy efficiency; Exact sciences and technology; Hydrogen; Hydrogen - metabolism; Metals; Platinum; Pollution; Stainless Steel; Organic matter; Catalytic reaction; Electrolysis; Electrochemical treatment; Catalyst
• ISSN: 0013-936X; 1520-5851
• DOI: 10.1021/es803074x

Microbial electrolysis cells (MECs) are an efficient technology for generating hydrogen gas from organic matter, but alternatives to precious metals are needed for cathode catalysts. We show here that high surface area stainless steel brush cathodes produce hydrogen at rates and efficiencies similar to those achieved with platinum-catalyzed carbon cloth cathodes in single-chamber MECs. Using a stainless steel brush cathode with a specific surface area of 810 m2/m3, hydrogen was produced at a rate of 1.7 ± 0.1 m3-H2/m3-d (current density of 188 ± 10 A/m3) at an applied voltage of 0.6 V. The energy efficiency relative to the electrical energy input was 221 ± 8%, and the overall energy efficiency was 78 ± 5% based on both electrical energy and substrate utilization. These values compare well to previous results obtained using platinum on flat carbon cathodes in a similar system. Reducing the cathode surface area by 75% decreased performance from 91 ± 3 A/m3 to 78 ± 4 A/m3. A brush cathode with graphite instead of stainless steel and a specific surface area of 4600 m2/m3 generated substantially less current (1.7 ± 0.0 A/m3), and a flat stainless steel cathode (25 m2/m3) produced 64 ± 1 A/m3, demonstrating that both the stainless steel and the large surface area contributed to high current densities. Linear sweep voltammetry showed that the stainless steel brush cathodes both reduced the overpotential needed for hydrogen evolution and exhibited a decrease in overpotential over time as a result of activation. These results demonstrate for the first time that hydrogen production can be achieved at rates comparable to those with precious metal catalysts in MECs without the need for expensive cathodes.