Computed tomography scan imaging of natural open fractures in a porous rock; geometry and fluid flow

• Published in: Geophysical Prospecting Vol. 57; no. 2; pp. 239 - 249
• Main Authors: Wennberg, Ole Petter, Rennan, Lars, Basquet, Remy
• Format: Journal Article Conference Proceeding
• Language: English
• Published: Oxford, UK Blackwell Publishing Ltd 01.03.2009; Blackwell
• Subjects: Applied geophysics; Earth sciences; Earth, ocean, space; Exact sciences and technology; Internal geophysics; experimental studies; models; orientation; density; porosity; simulation; fracture networks; reservoirs; inundations; gas injection; velocity; open fractures; bars; cuttings; drill cores; confining pressure; stylolites; tomography; condensates; geometry; flow
• ISSN: 0016-8025; 1365-2478
• DOI: 10.1111/j.1365-2478.2009.00784.x

ABSTRACT Computed tomography scan imaging techniques have been used on core samples to investigate the effect of natural open fractures on reservoir flow in the Snøhvit Gas Condensate Field. Firstly, computed tomography (CT) scanning was used to describe the 3D geometrical properties of the fracture network including orientation and fracture density. Two types of fractures were observed: F1 fractures are short and stylolite related and F2 fractures are longer, cross‐cutting the core and without any obvious relationship to stylolites. Secondly, monitoring of single and two phase flow experiments on samples containing these two types of natural open fractures was performed under 10 and 80 bar net confining pressure while using CT scanning. 1‐phase miscible flooding experiment shows approximately 3 times higher flooding velocity in an open F2 fracture than in the matrix. 2‐phase flooding by gas injection into a 100% water saturated core gave early gas breakthrough due to flow in the fracture and thereafter very little water production. The flow experiments showed that the presence of open fractures has a significant local effect on fluid flow even in a case with relatively high matrix porosity (200–300 mD). The sample containing F1 fractures showed a complex flow pattern influenced both by open fractures and stylolites. The CT scan data enables an exact representation of the fracture network in core scale simulation models and therefore improves the understanding of fracture influence on flow in a fractured porous medium. CT scanning of core samples provides an effective tool for integrating geology and fluid flow properties of a porous fractured medium.