The pyrolysis kinetics of the conversion of Malaysian kaolin to metakaolin
The aim of this work was to study the pyrolysis kinetics of the thermal transformation of kaolin to metakaolin with the aid of models and model free isoconversional methods. Thermal treatment in the range of 600–850°C is used to convert kaolin into an amorphous and highly reactive metakaolin (MK). I...
Saved in:
Published in | Applied clay science Vol. 146; pp. 152 - 161 |
---|---|
Main Authors | , , , , , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier B.V
15.09.2017
|
Subjects | |
Online Access | Get full text |
Cover
Loading…
Summary: | The aim of this work was to study the pyrolysis kinetics of the thermal transformation of kaolin to metakaolin with the aid of models and model free isoconversional methods. Thermal treatment in the range of 600–850°C is used to convert kaolin into an amorphous and highly reactive metakaolin (MK). In this study, the thermal transformation of kaolin to metakaolin was investigated using thermokinetics and instrumental analysis. Kaolin was subjected to thermogravimetric analysis (TGA) at heating rates of 10, 20 and 40°C/min, in the temperature range of 50–800°C. Approximately, 14.2% of mass loss was recorded during the TG analysis. 95% of the degree of dehydroxylation was attained at 635°C, representing the minimum temperature for this process. The TGA and its related data were analyzed using model free (based on DTG, DTA and TG) and model based kinetics methods. Both DTG and DTA peak temperatures were employed for the thermokinetics of kaolin using Ozawa, Kissinger and Starink methods; giving an Ea in the range of 246.6–252.5kJ·mol−1. A slight higher average Ea (266–267kJ·mol−1 vs 246.6–252.5kJ·mol−1) was observed when TGA based integral methods (KAS, FWO and Starink) were used. The mechanism of the thermokinetics was investigated using the Redfern model and the best fitting was given by 3rd order chemical reaction (F3) function. Both model-free and model based thermokinetics methods could be used to validate the thermal transformation of kaolinite to metakaolinite.
•Thermokinetics methods produced Ea in the range of 246.6-281KJ/mol and the lnA in the range of 31-39min-1.•Starink method was successfully applied to DTG, DTA and TG data.•The Redfern model showed that a third order chemical reaction (F3) was followed by thermal transformation of kaolin.•The 95% dehydroxylation can be achieved at temperature higher than 635°C. |
---|---|
ISSN: | 0169-1317 1872-9053 |
DOI: | 10.1016/j.clay.2017.05.017 |