Comparative Study of MIL-96(Al) as Continuous Metal–Organic Frameworks Layer and Mixed-Matrix Membrane

• Published in: ACS applied materials & interfaces Vol. 8; no. 11; pp. 7536 - 7544
• Main Authors: Knebel, Alexander, Friebe, Sebastian, Bigall, Nadja Carola, Benzaqui, Marvin, Serre, Christian, Caro, Jürgen
• Format: Journal Article
• Language: English
• Published: United States American Chemical Society 23.03.2016
• Subjects: crystal morphology; mixed-matrix membrane (MMM); MOF membrane; hydrogen/carbon dioxide separation; MIL-96(Al)
• ISSN: 1944-8244; 1944-8252
• DOI: 10.1021/acsami.5b12541

MIL-96­(Al) layers were prepared as supported metal–organic frameworks membrane via reactive seeding using the α-alumina support as the Al source for the formation of the MIL-96­(Al) seeds. Depending on the solvent mixture employed during seed formation, two different crystal morphologies, with different orientation of the transport-active channels, have been formed. This crystal orientation and habit is predefined by the seed crystals and is kept in the subsequent growth of the seeds to continuous layers. In the gas separation of an equimolar H2/CO2 mixture, the hydrogen permeability of the two supported MIL-96­(Al) layers was found to be highly dependent on the crystal morphology and the accompanied channel orientation in the layer. In addition to the neat supported MIL-96­(Al) membrane layers, mixed-matrix membranes (MMMs, 10 wt % filler loading) as a composite of MIL-96­(Al) particles as filler in a continuous Matrimid polymer phase have been prepared. Five particle sizes of MIL-96­(Al) between 3.2 μm and 55 nm were synthesized. In the preparation of the MIL-96­(Al)/Matrimid MMM (10 wt % filler loading), the following preparation problems have been identified: The bigger micrometer-sized MIL-96­(Al) crystals show a trend toward sedimentation during casting of the MMM, whereas for nanoparticles aggregation and recrystallization to micrometer-sized MIL-96­(Al) crystals has been observed. Because of these preparation problems for MMM, the neat supported MIL-96­(Al) layers show a relatively high H2/CO2 selectivity (≈9) and a hydrogen permeance approximately 2 magnitudes higher than that of the best MMM.