High-Temperature Release of SO2 from Calcined Cement Raw Materials

• Published in: Energy & fuels Vol. 25; no. 7; pp. 2917 - 2926
• Main Authors: Nielsen, Anders R, Larsen, Morten B, Glarborg, Peter, Dam-Johansen, Kim
• Format: Journal Article
• Language: English
• Published: American Chemical Society 21.07.2011
• Subjects: Cement; Combustion; Decomposition; Fuel technology; raw materials; Sulfates; Sulfur; Sulfur dioxide; Temperature
• ISSN: 0887-0624; 1520-5029
• DOI: 10.1021/ef2006222

During combustion of alternative fuels in the material inlet end of cement rotary kilns, local reducing conditions may occur and cause reductive decomposition of sulfates from calcined cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, which may cause deposit formation in the kiln system. In this study, the release of sulfur from calcined cement raw materials under both oxidizing and reducing conditions is investigated. The investigations include thermodynamic equilibrium calculations in the temperature interval of 800–1500 °C and experiments in a tube furnace reactor in the temperature interval of 900–1100 °C. The investigated conditions resemble actual conditions in the material inlet end of cement rotary kilns. It was found that the sulfates CaSO4, K2SO4, and Na2SO4 were all stable under oxidizing conditions but began to decompose under reducing conditions. Particularly, CaSO4 was sensitive to reducing conditions. The sulfur release was most significant if the gas atmosphere frequently shifted between oxidizing and reducing conditions. An increasing temperature from 900 to 1100 °C under alternating oxidizing and reducing conditions was also observed to increase the sulfur release from the calcined raw materials by a factor of 3, from 14 to 48%.