Characteristics of a Large-Scale Deep Foundation Pit Excavated by the Central-Island Technique in Shanghai Soft Clay. I: Bottom-Up Construction of the Central Cylindrical Shaft

• Published in: Journal of geotechnical and geoenvironmental engineering Vol. 139; no. 11; pp. 1875 - 1893
• Main Authors: Tan, Yong, Wang, Dalong
• Format: Journal Article
• Language: English
• Published: Reston, VA American Society of Civil Engineers 01.11.2013
• Subjects: Applied sciences; Building process; Buildings. Public works; Construction works; Earthwork. Foundations. Retaining walls; Exact sciences and technology; Geotechnics; Measurements. Technique of testing; Miscellaneous; Technical Papers; Asia; China; Large-scale deep foundation pit; Artesian wells; Site analysis; Soft clay; Bottom-up method; Geometric effect; Cylindrical shaft; Shafts; China; Behavior; Clay; Instruments; Foundation shaft; Structural behavior; Experimental study; Deep foundations; Soft soil; Soil mechanics; Structural behaviors; Geometry; Measurement in situ; Soil settlement; Clays; Bottom up method; Construction technology; Artesian water; Ground behaviors; Structural analysis
• ISSN: 1090-0241; 1943-5606
• DOI: 10.1061/(ASCE)GT.1943-5606.0000928

AbstractA large amount of field and experimental data has been devoted to rectangular excavations thus far. In contrast, very few data were available for cylindrical excavations, especially those with large diameters in thick soft clay deposits. Via a comprehensive instrumentation program on a 100-m-wide×25.89-m-deep unpropped (self-supported) cylindrical excavation constructed by the bottom-up method in Shanghai soft clay, the characteristics of this large-sized circular excavation were extensively investigated. This cylindrical shaft was a part of a large-scale deep foundation pit excavated by the central-island technique. The investigated items included (1) lateral wall deflections, (2) vertical wall movements, (3) lateral ground movements, (4) ground settlements, (5) subsurface settlements, (6) basal heaves, (7) vertical column movements, (8) column stresses, and (9) variation of pore pressures along depth and artesian water levels. Analysis of the field data indicates that discharging of the deep artesian water was one of the key factors affecting the excavation behaviors. The influence zone of basal heave caused by soil removal (stress relief) reached very deep soil layers, far beyond the depths reported in literature. Column movement and stress were shown to be reliable indicators of the relative movement between basal soils, diaphragm walls, and interior columns. Finally, the comparisons of this study with other bottom-up excavations in Shanghai, including 11 cylindrical excavations, 92 building basement excavations, and eight metro station excavations, demonstrate that self-supported (unpropped) cylindrical excavations had much stronger capabilities of resisting deformation than both multipropped regular basement excavations (in terms of deformation magnitudes) and long and narrow metro station excavations (in terms of scale of influence zones). For cylindrical shafts, their diameters, and not wall penetration ratios, played a dominant role in the determination of excavation behaviors. However, when the shaft diameter reached 90 m or more, the advantage of cylindrical shafts over rectangular pits in constraining wall deflection was no longer obvious.