Iris 법을 이용한 전단접착강도 측정에서 와동벽의 영향

• Published in: 大韓齒科保存學會誌 Vol. 29; no. 2; pp. 170 - 176
• Main Authors: Kim, Dong-Hwan, Bae, Ji-Hyun, Cho, Byeong-Hoon, Lee, In-Bog, Baek, Seung-Ho, Ryu, Hyun-Mi, Son, Ho-Hyun, Um, Chung-Moon, Kwon, Hyuck-Choon
• Format: Journal Article
• Language: Korean
• Published: 2004
• Subjects: Iris
• ISSN: 1225-0864

Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.005), but not in $ALL-BOND^{\circledR}$ 2 (p＝0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions：The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property. 목적 : 본 연구에서는 '전단접착강도 시험법에서 cohesive failure를 줄일 수 있는 것으로 소개된 metal iris를 사용하면, 실제의 1급 와동에서보다 복합 레진과 와동벽의 결합이 없어서 C-factol 적게 작용하고 계면에 발생하는 수축 응력이 감소됨으로써, 임상에서보다 높은 결합력 값이 보고될 것이다.'라는 가설을 검증하기 위하여 dentin ilia를 사용하여 전단접착강도를 측정하였다. 방법 : 64개의 대구치를 4군으로 구분하여 metal iris와 dentin iris군으로 구분하고, 그 각각을 ONE-STEP과 ALL-BOND 2의 두 군으로 나누었다. bonding agent를 적용하고. iris를 고정한 후, 복합 레진을 충전하여 시편을 완성하였다. 이 때 dentin iris의 경우 내면에도 bonding agent를 적용하여 와동벽과의 결합이 발생하게 하였다. 전단접착강도는 24시간 후 측정하였고, 파절의 양상은 주사전자현미경과 입체광학현미경을 이용하여 결정하였다. 결과 : 전단접착강도 측정법에서 iris 법을 이용함으로써 cohesive failure를 줄일 수 있다. 전단접착강도 측정법은 adhesive 두께가 얇은 경우에 와동벽의 영향을 받는다.