Fabrication of Mems Bulk Sic-Based Accelerometer and its Application in Ground Test of Aero-Engine

This paper reports a MEMS accelerometer based on bulk SiC. The fabrication and packaging scheme were designed, an efficient signal processing circuit was built, and the output performance of the sensor was tested. The test results show that the resistivity of the piezoresistive material is 194.40 Ωꞏ...

Full description

Saved in:
Bibliographic Details
Published in2023 22nd International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers) pp. 2050 - 2053
Main Authors Zhai, Yanxin, Xu, Tiantong, Xu, Guoqiang, Wang, Hengyi, Cao, Xiaoda, Li, Haiwang
Format Conference Proceeding
LanguageEnglish
Published IEEJ 25.06.2023
Subjects
accelerometer
Accelerometers
aero-engine applications
Fabrication
MEMS
Micromechanical devices
Sensitivity
Silicon carbide
Varistors
Vibrations
Online AccessGet full text

Cover

More Information
Summary:This paper reports a MEMS accelerometer based on bulk SiC. The fabrication and packaging scheme were designed, an efficient signal processing circuit was built, and the output performance of the sensor was tested. The test results show that the resistivity of the piezoresistive material is 194.40 Ωꞏum, the sensor's output sensitivity is 0.21 mV/g, the linearity is 99.8%, and the resonance frequency is 1636 Hz. Finally, the accelerometer was applied to the two ground vibration tests of aero-engine, and the vibration signal of the turbine components and the test bed was successfully extracted.
ISSN:2167-0021