원자로 내부구조물 균열개시 민감도에 미치는 영향인자 고찰

• Published in: Corrosion science and technology Vol. 20; no. 4; pp. 210 - 229
• Main Authors: 황성식, Seong Sik Hwang, 최민재, Min Jae Choi, 김성우, Sung Woo Kim, 김동진, Dong Jin Kim
• Format: Journal Article
• Language: Korean
• Published: 한국부식방식학회 31.08.2021
• Subjects: Dissolved hydrogen; IASCC initiation; Nuclear power plant; Stainless steels; Threshold fluence; 금속공학; IASCC initiation; Threshold fluence; Nuclear power plant; Stainless steels; Dissolved hydrogen
• ISSN: 1598-6462; 2288-6524
• DOI: 10.14773/cst.2021.20.4.210

To safely operate domestic nuclear power plants approaching the end of their design life, the material degradation management strategy of the components is important. Among studies conducted to improve the soundness of nuclear reactor components, research methods for understanding the degradation of reactor internals and preparing management strategies were surveyed. Since the IGSCC (Intergranular Stress Corrosion Cracking) initiation and propagation process is associated with metal dissolution at the crack tip, crack initiation sensitivity was decreased in the hydrogenated water with decreased crack sensitivity but occurrence of small surface cracks increased. A stress of 50 to 55% of the yield strength of the irradiated materials was required to cause IASCC (Irradiation Assisted Stress Corrosion Cracking) failure at the end of the reactor operating life. In the threshold-stress analysis, IASCC cracks were not expected to occur until the end of life at a stress of less than 62% of the investigated yield strength, and the IASCC critical dose was determined to be 4 dpa (Displacement Per Atom). The stainless steel surface oxide was composed of an internal Cr-rich spinel oxide and an external Fe and Ni-rich oxide, regardless of the dose and applied strain level.