Laser Cladding of Ti-6Al-4V Alloy with Ti-Al2O3 Coating for Biomedical Applications

• Published in: IOP conference series. Materials Science and Engineering Vol. 350; no. 1
• Main Authors: Mthisi, A, Popoola, A P I, Adebiyi, D I, Popoola, O M
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.05.2018
• Subjects: Alumina-Titanium; Aluminum oxide; Biomedical materials; Body fluids; Corrosion rate; Corrosion resistance; Corrosion resistant alloys; Electrochemical analysis; Laser beam cladding; Lasers; Mechanical properties; Microstructure; Optical microscopes; Protective coatings; Titanium alloys; Titanium base alloys; Tribology
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/350/1/012005

The indispensable properties of Ti-6Al-4V alloy coupled with poor tribological properties and delayed bioactivity make it a subject of interest to explore in biomedical application. A quite number of numerous coatings have been employed on titanium alloys, with aim to overcome the poor properties exhibited by this alloy. In this work, the possibility of laser cladding different ad-mixed powders (Ti - 5 wt.% Al2O3 and Ti - 8wt.% Al2O3) on Ti-6Al-4V at various laser scan speed (0.6 and 0.8 m/min) were investigated. The microstructure, phase constituents and corrosion of the resultant coatings were characterized by scanning electron microscope (SEM), Optical microscope, X-Ray diffractometer (XRD) and potentiostat respectively. The electrochemical behaviour of the produced coatings was studied in a simulated body fluid (Hanks solution). The microstructural results show that a defect free coating is achieved at low scan speed and ad-mixed of Ti-5 wt. % Al2O3. Cladding of Ti - Al2O3 improved the corrosion resistance of Ti-6Al-4V alloy regardless of varying neither scan speed nor ad-mixed percentage. However, Ti-5 wt.% Al2O3 coating produced at low scan speed revealed the highest corrosion resistance among the coatings due to better quality coating layer. Henceforth, this coating may be suitable for biomedical applications.