A Constitutive Model to Predict the Elevate Temperature Flow Stress of 9Cr-1Mo Steel

Hot deformation behavior of 9Cr-1Mo ferritic steel has been studied in a wide range of temperatures (900-1200°C) and strain rates (0.01-10s-1). Using the true stress-strain data obtained from isothermal hot compression tests, a constitutive modeling has been developed. The flow stress increased with...

Full description

Saved in:
Bibliographic Details
Published inInternational Conference on Measuring Technology and Mechatronics Automation (Print) pp. 1 - 4
Main Authors Liu, Jiaojiao, Xie, Guosheng, Wan, Keyang, Liang, Xiong, Peng, Bicao
Format Conference Proceeding
LanguageEnglish
Published IEEE 01.02.2018
Subjects
9Cr-1Mo ferritic steel
Constitutive modeling
Flow stress
Hot compression deformation
Mathematical model
Predictive models
Steel
Strain
Stress
Temperature correction
Temperature distribution
Online AccessGet full text

Cover

More Information
Summary:Hot deformation behavior of 9Cr-1Mo ferritic steel has been studied in a wide range of temperatures (900-1200°C) and strain rates (0.01-10s-1). Using the true stress-strain data obtained from isothermal hot compression tests, a constitutive modeling has been developed. The flow stress increased with decrease of deformation temperature and increase of strain rate, which can be represented by the Zener-Hollomon parameter in an exponential equation. The contour map for flow stress at the strain of 0.8 was developed which can describe the distribution of flow stress explicitly. The influence of strain was incorporated in the developed constitutive modeling by considering effects of strain on material constants. The flow stress predicted by the constitutive model shows a satisfactory agreement with the experimental value through whole tested deformation conditions except a slight deviation for predicting the stress deformed at 900°C and 0.01s-1 and the average relative error is 5.54%.
ISSN:2157-1481
DOI:10.1109/ICMTMA.2018.00008