Insights into the fracture properties of recycled ceramic and rubber composite cement-based materials: Fracture mechanics, acoustic emission, and digital image correlation

• Published in: Construction & building materials Vol. 435
• Main Authors: Yang, Jian, Gao, Xifeng, Xu, Jie, Lacidogna, Giuseppe, Shao, Jianwen, Zhu, Han, Liu, Chongyang, Ye, Chengjie
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 12.07.2024
• Subjects: Acoustic emission; Ceramics waste aggregate; Digital image correlation; Fracture mechanics; Rubber aggregate; Acoustic emission; Ceramics waste aggregate; Rubber aggregate; Fracture mechanics; Digital image correlation
• ISSN: 0950-0618; 1879-0526
• DOI: 10.1016/j.conbuildmat.2024.136896

Recycling plays a pivotal role in construction waste management, offering a path toward sustainability for the industry. Although waste ceramics can compensate for the mechanical properties of rubberized cement-based materials, the smooth glaze surface of waste ceramics increases the risk of brittle failure. This study investigated the effect of ceramic waste aggregate (CWA) on the fracture properties of rubberized mortar through the three-point bending experiment. The fracture parameters were calculated using the Double-K fracture criterion. Simultaneously, acoustic emission (AE) and digital image correlation (DIC) technologies were used to explore the fracture damage mechanism and the crack evolution process. The results indicate that the integration of 15 % and 45 % CWA significantly enhances both initiation (KICini) and unstable (KICun) fracture toughness, whereas incorporating 90 % CWA leads to a 16.8 % and 8.2 % decrease in (KICini)and (KICun), respectively. The fracture energy (GF) of rubberized mortar exhibits a continuous decline as a function of increasing CWA substitution rates. Furthermore, GMM-based RA-AF analysis elucidates a positive correlation between CWA content and tensile crack proportion in specimens. When the CWA content reaches 90 %, the proportion of tensile cracks is quantified at 29.83 %, surpassing that in standard mortar. Crack tip opening displacement (CTOD) at 0.5post-Pmax for specimens with 15 %, 45 %, and 90 % CWA substitution reveal improvements of 49.1 % and 17.2 %, and a decrease of 23.3 %, respectively, compared to standard mortar, indicating that 15 % and 45 % CWA effectively preserve the ductility of rubberized mortar. Elevated CWA substitution leads to an amplified strain localization phenomenon around the crack tip, heightening the propensity for brittle failure. •Investigated the effect of waste ceramics and rubber on fracture behavior in cement-based materials.•The fracture properties of composite mortar were quantified through the Double-K fracture criterion.•Utilizing the digital image correlation method to capture the crack propagation process.•The fracture damage mechanism of composite mortar was explored through the acoustic emission technique.