Use of Dampers to Improve the Overspeed Control System with Movable Arms for Butterfly Wind Turbines

• Published in: Energies (Basel) Vol. 17; no. 11; p. 2727
• Main Authors: Hara, Yutaka, Higami, Hiroyuki, Ishikawa, Hiromitsu, Ono, Takeshi, Saito, Shigenori, Ichinari, Kenichiro, Yamamoto, Katsushi
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.06.2024
• Subjects: aileron; Air-turbines; Alternative energy sources; Aluminum; Analysis; butterfly wind turbine; Control systems; Costs; damper; movable arm; Offshore; overspeed control; Simulation methods; Turbines; vertical axis; Wind power; Japan
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en17112727

To reduce the cost of small wind turbines, a prototype of a butterfly wind turbine (6.92 m in diameter), a small vertical-axis type, was developed with many parts made of extruded aluminum suitable for mass production. An overspeed control system with movable arms that operated using centrifugal and aerodynamic forces was installed for further cost reduction. Introducing this mechanism eliminates the need for large active brakes and expands the operating wind speed range of the wind turbine. However, although the mechanism involving the use of only bearings is simple, the violent movement of the movable arms can be a challenge. To address this in the present study, dampers were introduced on the movable arm rotation axes to improve the movement of the movable arms. To predict the behavior of a movable arm and the performance of the wind turbine with the mechanism, a simulation method was developed based on the blade element momentum theory and the equation of motion of the movable arm system. A comparison of experiments and predictions with and without dampers demonstrated qualitative agreement. In the case with dampers, measurements confirmed the predicted increase in the rotor rotational speed when the shorter ailerons installed perpendicularly to the movable arms were used to achieve the inclination. Field experiments of the generated power at a wind speed of 6 m/s (10 min average) showed relative performance improvements of 11.4% by installing dampers, 91.3% by shortening the aileron length, and 57.6% by changing the control target data. The movable arm system with dampers is expected to be a useful device for vertical-axis wind turbines that are difficult to control.