3D printing in orthognathic surgery − A literature review

With the recent advances in three-dimensional (3D) imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of craniofacial structures and improved prediction of surgical outcomes in orthognathic surgery. A variety of patient-specific surgical guides and device...

Full description

Saved in:
Bibliographic Details
Published inJournal of the Formosan Medical Association Vol. 117; no. 7; pp. 547 - 558
Main Authors Lin, Hsiu-Hsia, Lonic, Daniel, Lo, Lun-Jou
Format Journal Article
LanguageEnglish
Published Singapore Elsevier B.V 01.07.2018
Elsevier
Subjects
3D printing
Additive manufacturing
Computer-aided design
Computer-aided manufacturing
Orthognathic surgery
Rapid prototyping
Orthognathic surgery
Rapid prototyping
Computer-aided design
Additive manufacturing
3D printing
Computer-aided manufacturing
Online AccessGet full text

Cover

Abstract With the recent advances in three-dimensional (3D) imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of craniofacial structures and improved prediction of surgical outcomes in orthognathic surgery. A variety of patient-specific surgical guides and devices have been designed and manufactured using 3D printing technology, which rapidly gained widespread popularity to improve the outcomes. The article presents an overview of 3D printing technology for state-of-the-art application in orthognathic surgery and discusses the impacts on treatment feasibility and patient outcome. The current available literature regarding the use of 3D printing methods in orthognathic surgery including 3D computer-aided design/computer-aided manufacturing, rapid prototyping, additive manufacturing, 3D printing, 3D printed models, surgical occlusal splints, custom-made guides, templates and fixation plates is reviewed. A Medline, PubMed, ProQuest and ScienceDirect search was performed to find relevant articles over the past 10 years. A total of 318 articles were found, out of which 69 were publications addressing the topic of this study. An additional 9 hand-searched articles were added. From the review, we can conclude that the use of 3D printing methods in orthognathic surgery provide the benefit of optimal functional and aesthetic results, patient satisfaction, and precise translation of the treatment plan.
AbstractList With the recent advances in three-dimensional (3D) imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of craniofacial structures and improved prediction of surgical outcomes in orthognathic surgery. A variety of patient-specific surgical guides and devices have been designed and manufactured using 3D printing technology, which rapidly gained widespread popularity to improve the outcomes. The article presents an overview of 3D printing technology for state-of-the-art application in orthognathic surgery and discusses the impacts on treatment feasibility and patient outcome. The current available literature regarding the use of 3D printing methods in orthognathic surgery including 3D computer-aided design/computer-aided manufacturing, rapid prototyping, additive manufacturing, 3D printing, 3D printed models, surgical occlusal splints, custom-made guides, templates and fixation plates is reviewed. A Medline, PubMed, ProQuest and ScienceDirect search was performed to find relevant articles over the past 10 years. A total of 318 articles were found, out of which 69 were publications addressing the topic of this study. An additional 9 hand-searched articles were added. From the review, we can conclude that the use of 3D printing methods in orthognathic surgery provide the benefit of optimal functional and aesthetic results, patient satisfaction, and precise translation of the treatment plan.
With the recent advances in three-dimensional (3D) imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of craniofacial structures and improved prediction of surgical outcomes in orthognathic surgery. A variety of patient-specific surgical guides and devices have been designed and manufactured using 3D printing technology, which rapidly gained widespread popularity to improve the outcomes. The article presents an overview of 3D printing technology for state-of-the-art application in orthognathic surgery and discusses the impacts on treatment feasibility and patient outcome. The current available literature regarding the use of 3D printing methods in orthognathic surgery including 3D computer-aided design/computer-aided manufacturing, rapid prototyping, additive manufacturing, 3D printing, 3D printed models, surgical occlusal splints, custom-made guides, templates and fixation plates is reviewed. A Medline, PubMed, ProQuest and ScienceDirect search was performed to find relevant articles over the past 10 years. A total of 318 articles were found, out of which 69 were publications addressing the topic of this study. An additional 9 hand-searched articles were added. From the review, we can conclude that the use of 3D printing methods in orthognathic surgery provide the benefit of optimal functional and aesthetic results, patient satisfaction, and precise translation of the treatment plan. Keywords: Orthognathic surgery, 3D printing, Computer-aided design, Computer-aided manufacturing, Rapid prototyping, Additive manufacturing
Author Lonic, Daniel
Lin, Hsiu-Hsia
Lo, Lun-Jou
Author_xml – sequence: 1
  givenname: Hsiu-Hsia
  surname: Lin
  fullname: Lin, Hsiu-Hsia
  organization: Craniofacial Research Center, Chang Gung Memorial Hospital, Chang Gung University, Taoyuan, Taiwan
– sequence: 2
  givenname: Daniel
  surname: Lonic
  fullname: Lonic, Daniel
  email: lonic@mface.de
  organization: MFACE KieferGesichtsZentrum Munich, HELIOS Hospital Munich West, Munich, Germany
– sequence: 3
  givenname: Lun-Jou
  surname: Lo
  fullname: Lo, Lun-Jou
  email: lunjoulo@cgmh.org.tw
  organization: Plastic & Reconstructive Surgery, Craniofacial Research Center, Chang Gung Memorial Hospital, Chang Gung University, Taoyuan, Taiwan
BackLink https://www.ncbi.nlm.nih.gov/pubmed/29398097$$D View this record in MEDLINE/PubMed
BookMark eNp9kc1u1TAQhS3Uit4WXoAFypJNwvgnTizYVOWvUqVuytoaO5NbR7lJsZOivgFrHpEnwZdbuuzKGuvMNzPnnLKjaZ6IsTccKg5cvx-qod9hJYC3FfAKoH3BNrxtdAmt4EdsA0aYUmulT9hpSgOA0sbol-xEGGlaMM2GfZCfirsYpiVM2yJMxRyX23k74XIbfJHWuKX4UPz59bs4L8awUMRljVREug_08xU77nFM9PrxPWPfv3y-ufhWXl1_vbw4vyp9LcVSGtn0jVfc5LLWGhrVNU0Lru5Q1Q5kQ603ggCFcKrmSrfovc_b8c5xqEmescsDt5txsHnbHcYHO2Ow_z7muLUYl-BHstAZh863DhGVBkBCdDVwVJJA9JhZ7w6suzj_WCktdheSp3HEieY1WW6Mkloa0FkqDlIf55Qi9U-jOdh9AHaw-wDsPgAL3OYActPbR_7qdtQ9tfx3PAs-HgSUHcsuRpt8oMlTFyL5JZ8UnuP_BTPFmEU
CitedBy_id crossref_primary_10_1097_JCMA_0000000000000364
crossref_primary_10_2174_18742106_v17_e230508_2023_37
crossref_primary_10_1016_j_stlm_2021_100038
crossref_primary_10_1016_j_jfma_2021_05_014
crossref_primary_10_1016_j_jpor_2018_12_006
crossref_primary_10_1016_j_ijom_2021_01_023
crossref_primary_10_1016_j_bjoms_2020_07_022
crossref_primary_10_3390_ma17061380
crossref_primary_10_1007_s10006_022_01047_0
crossref_primary_10_1097_PRS_0000000000008969
crossref_primary_10_3390_jcm9092794
crossref_primary_10_1097_SCS_0000000000008684
crossref_primary_10_1186_s12903_022_02070_z
crossref_primary_10_3390_jcm12216843
crossref_primary_10_12968_ortu_2023_16_4_177
crossref_primary_10_3390_app11125673
crossref_primary_10_1055_s_0041_1740646
crossref_primary_10_1155_2022_5530188
crossref_primary_10_1002_jdd_12860
crossref_primary_10_3390_designs8030057
crossref_primary_10_1080_24735132_2024_2334601
crossref_primary_10_1177_10556656221151096
crossref_primary_10_3390_app12115581
crossref_primary_10_2217_3dp_2022_0025
crossref_primary_10_35711_aimi_v2_i6_104
crossref_primary_10_1111_os_13328
crossref_primary_10_1016_j_ijom_2019_11_013
crossref_primary_10_1016_j_jormas_2021_09_001
crossref_primary_10_1186_s13018_024_04712_0
crossref_primary_10_1039_D1NR04912G
crossref_primary_10_3390_jcm11226625
crossref_primary_10_1590_1516_3180_2022_14111125082022
crossref_primary_10_1016_j_cjtee_2024_03_004
crossref_primary_10_1177_27325016221102574
crossref_primary_10_1016_j_hansur_2024_101709
crossref_primary_10_1007_s00784_023_05134_8
crossref_primary_10_3390_jcm10174000
crossref_primary_10_1186_s40902_020_00276_1
crossref_primary_10_3390_app131910988
crossref_primary_10_1002_smll_202100817
crossref_primary_10_7759_cureus_63495
crossref_primary_10_3390_medicina58111588
crossref_primary_10_1186_s41205_020_00082_5
crossref_primary_10_1016_j_bj_2021_05_006
crossref_primary_10_2186_jpr_JPR_D_21_00345
crossref_primary_10_3390_ijerph191811834
crossref_primary_10_1007_s12663_019_01275_0
crossref_primary_10_1016_j_ijom_2024_03_003
crossref_primary_10_1002_maco_202011658
crossref_primary_10_4103_digm_digm_36_22
crossref_primary_10_1155_2022_6413898
crossref_primary_10_1186_s12903_023_02918_y
crossref_primary_10_1177_27325016241234043
crossref_primary_10_1016_j_compbiomed_2019_103435
crossref_primary_10_3390_jcm11226807
crossref_primary_10_1016_j_jfma_2018_06_004
crossref_primary_10_1155_2021_9950131
crossref_primary_10_7759_cureus_47979
crossref_primary_10_1002_rcs_2243
crossref_primary_10_1053_j_sodo_2018_10_005
crossref_primary_10_1590_pboci_2020_064
crossref_primary_10_1155_2022_6797745
crossref_primary_10_1080_09205063_2022_2099666
crossref_primary_10_3389_fsurg_2020_537616
crossref_primary_10_1016_j_actbio_2020_12_044
crossref_primary_10_1089_hum_2023_008
crossref_primary_10_1016_j_joms_2020_12_048
crossref_primary_10_1051_mbcb_2020057
crossref_primary_10_7759_cureus_28379
crossref_primary_10_3390_met10111547
crossref_primary_10_1016_j_joms_2023_03_006
crossref_primary_10_1007_s00784_022_04798_y
crossref_primary_10_1016_j_ijpharm_2022_121448
crossref_primary_10_1097_JCMA_0000000000000791
crossref_primary_10_3390_jcm11092385
crossref_primary_10_3390_jpm13111578
crossref_primary_10_1088_1757_899X_635_1_012034
crossref_primary_10_3390_jpm14030324
crossref_primary_10_1186_s12903_021_01547_7
crossref_primary_10_1093_jscr_rjab345
crossref_primary_10_1186_s41205_022_00147_7
crossref_primary_10_1016_j_coms_2019_08_004
crossref_primary_10_1097_SCS_0000000000010271
crossref_primary_10_1097_SCS_0000000000008394
crossref_primary_10_1097_01_CSS_0000824756_54399_5f
crossref_primary_10_1080_19424396_2023_2202444
crossref_primary_10_1097_SCS_0000000000008789
crossref_primary_10_1111_ors_12658
crossref_primary_10_1038_s41598_019_49506_1
crossref_primary_10_1186_s12903_022_02247_6
crossref_primary_10_1097_PRS_0000000000006686
crossref_primary_10_1097_SCS_0000000000006767
crossref_primary_10_1097_SCS_0000000000009912
crossref_primary_10_1016_j_bjoms_2023_04_009
crossref_primary_10_1186_s40902_023_00375_9
crossref_primary_10_1055_a_2096_0521
crossref_primary_10_1097_SCS_0000000000006754
crossref_primary_10_1097_MOO_0000000000000638
crossref_primary_10_3390_polym14051047
crossref_primary_10_3390_jcm12041444
crossref_primary_10_1016_j_jcms_2021_03_004
crossref_primary_10_1111_jerd_12955
crossref_primary_10_12968_ortu_2023_16_4_189
crossref_primary_10_3390_app12094305
crossref_primary_10_1186_s41205_024_00217_y
Cites_doi 10.1016/j.joms.2012.11.004
10.1016/j.coms.2014.09.004
10.1016/j.joms.2016.01.016
10.1016/j.joms.2015.04.019
10.1016/j.ijom.2013.03.025
10.1016/j.joms.2013.07.007
10.1016/j.tripleo.2011.02.003
10.1371/journal.pone.0152014
10.1016/j.bjoms.2016.07.007
10.1016/j.jcms.2017.07.001
10.1038/nbt.2958
10.1016/j.bjoms.2013.03.007
10.1016/j.molmed.2016.01.003
10.1016/j.compbiomed.2015.10.015
10.1016/j.jcms.2008.10.008
10.1016/j.oooo.2011.09.035
10.3109/10929088.2014.887778
10.1016/j.joms.2011.12.017
10.1016/j.ijom.2013.07.539
10.1016/j.coms.2014.08.003
10.1016/j.ijom.2013.08.016
10.1016/j.jcms.2014.12.003
10.1590/2177-6709.21.1.089-100.oar
10.1016/j.ijscr.2016.10.004
10.1016/j.tripleo.2007.07.040
10.1016/j.ijom.2009.06.009
10.1016/j.ajodo.2008.01.019
10.1016/j.ijom.2015.08.413
10.1016/j.jcms.2016.09.008
10.1088/1758-5082/5/4/045003
10.1016/j.ajodo.2012.10.029
10.1016/j.jcms.2011.03.014
10.1016/j.bjoms.2016.03.012
10.1007/s10439-014-1207-1
10.1016/j.ijom.2015.12.018
10.1016/j.bjoms.2014.04.010
10.1016/j.jcms.2015.04.006
10.1016/j.jcms.2012.11.017
10.1016/j.joms.2015.04.005
10.1007/s11548-015-1223-0
10.1016/j.jcms.2012.03.015
10.1016/j.ijom.2015.05.012
10.1016/j.cxom.2015.10.006
10.1016/j.oooo.2015.07.007
10.1016/j.ijom.2015.02.020
10.1016/j.joms.2013.09.044
10.1016/j.ijom.2010.03.018
10.1016/j.tripleo.2008.06.002
10.1016/j.ijom.2016.04.017
10.1016/j.oooo.2011.11.009
10.1016/j.jcms.2014.07.002
10.1016/j.ijom.2014.03.011
10.1016/j.jcms.2015.08.001
10.1002/adhm.201500492
10.1016/j.ajodo.2007.11.018
10.1016/j.oooo.2016.03.004
10.1016/j.jcms.2014.09.001
10.1016/j.ijom.2016.10.002
10.1016/j.bjoms.2010.11.009
10.1016/j.tripleo.2010.04.038
10.1016/j.ajoms.2016.06.007
10.1016/j.ijom.2015.07.022
10.1007/s00253-013-4853-6
10.1097/scs.0b013e318069014f
10.1016/j.ijom.2014.11.007
10.1088/1758-5082/6/3/035001
10.1016/j.ijom.2015.10.013
10.1016/j.joms.2014.03.002
10.1016/j.ijom.2015.07.010
10.1016/j.joms.2015.03.044
10.1016/j.joms.2015.03.026
10.1016/j.joms.2014.10.028
10.1016/j.ijom.2013.07.541
10.1016/j.coms.2009.11.005
10.1186/s40902-015-0044-y
10.1016/j.ejps.2012.07.020
10.1097/SCS.0b013e31829a80d9
10.1016/S0901-5027(00)80116-2
10.1016/j.ajodo.2005.03.029
10.1016/j.bjoms.2013.12.010
10.1016/j.ijom.2014.10.025
10.1016/j.procir.2015.11.017
10.1016/j.tripleo.2010.05.052
ContentType Journal Article
Copyright 2018
Copyright © 2018. Published by Elsevier B.V.
Copyright_xml – notice: 2018
– notice: Copyright © 2018. Published by Elsevier B.V.
DBID 6I.
AAFTH
NPM
AAYXX
CITATION
7X8
DOA
DOI 10.1016/j.jfma.2018.01.008
DatabaseName ScienceDirect Open Access Titles
Elsevier:ScienceDirect:Open Access
PubMed
CrossRef
MEDLINE - Academic
Directory of Open Access Journals
DatabaseTitle PubMed
CrossRef
MEDLINE - Academic
DatabaseTitleList MEDLINE - Academic
PubMed
Database_xml – sequence: 1
  dbid: DOA
  name: DOAJ Directory of Open Access Journals
  url: https://www.doaj.org/
  sourceTypes: Open Website
– sequence: 2
  dbid: NPM
  name: PubMed
  url: https://proxy.k.utb.cz/login?url=http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed
  sourceTypes: Index Database
DeliveryMethod fulltext_linktorsrc
Discipline Medicine
EISSN 1876-0821
EndPage 558
ExternalDocumentID oai_doaj_org_article_0d9babc8baaa4600aeaab501a43e02fa
10_1016_j_jfma_2018_01_008
29398097
S0929664617304138
Genre Journal Article
Review
GroupedDBID ---
--K
.1-
.55
.FO
.~1
0R~
0SF
188
1B1
1P~
1~.
1~5
2UF
2WC
4.4
457
4G.
53G
5GY
5VS
6I.
7-5
71M
8P~
8RM
AABNK
AACTN
AAEDW
AAFTH
AAIKJ
AALRI
AAQFI
AAWTL
AAXUO
ABBQC
ABFNM
ABJNI
ABMAC
ABXDB
ACGFO
ADMUD
AEKER
AENEX
AEVXI
AEXQZ
AFCTW
AFRHN
AFTJW
AGHFR
AGYEJ
AHPSJ
AINHJ
AITUG
AJRQY
AJUYK
ALMA_UNASSIGNED_HOLDINGS
AMRAJ
CEFSP
CNMHZ
CS3
DU5
EBS
EJD
EO8
EO9
EP2
EP3
F5P
FDB
FEDTE
FIRID
FNPLU
GBLVA
GROUPED_DOAJ
GX1
HVGLF
HZ~
IHE
IPNFZ
J1W
LCYCR
M41
MO0
N9A
NCXOZ
O-L
O9-
OK1
OZT
P-8
P-9
P2P
PC.
Q38
RIG
ROL
RPZ
SDF
SDG
SEL
SES
SSZ
TR2
UZ5
X7M
Z5R
ZXP
ADVLN
AKRWK
NPM
AAYXX
CITATION
7X8
ID FETCH-LOGICAL-c532t-937f7c419c53566074d7780b5da45b037e8c92e0a22b451468accc0971db105e3
IEDL.DBID DOA
ISSN 0929-6646
IngestDate Tue Oct 22 15:03:10 EDT 2024
Fri Aug 16 22:23:33 EDT 2024
Fri Aug 23 00:39:44 EDT 2024
Wed Oct 16 00:58:36 EDT 2024
Fri Feb 23 02:28:32 EST 2024
IsDoiOpenAccess true
IsOpenAccess true
IsPeerReviewed true
IsScholarly true
Issue 7
Keywords Orthognathic surgery
Rapid prototyping
Computer-aided design
Additive manufacturing
3D printing
Computer-aided manufacturing
Language English
License This is an open access article under the CC BY-NC-ND license.
Copyright © 2018. Published by Elsevier B.V.
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c532t-937f7c419c53566074d7780b5da45b037e8c92e0a22b451468accc0971db105e3
Notes ObjectType-Article-2
SourceType-Scholarly Journals-1
ObjectType-Feature-3
content type line 23
ObjectType-Review-1
OpenAccessLink https://doaj.org/article/0d9babc8baaa4600aeaab501a43e02fa
PMID 29398097
PQID 1994363906
PQPubID 23479
PageCount 12
ParticipantIDs doaj_primary_oai_doaj_org_article_0d9babc8baaa4600aeaab501a43e02fa
proquest_miscellaneous_1994363906
crossref_primary_10_1016_j_jfma_2018_01_008
pubmed_primary_29398097
elsevier_sciencedirect_doi_10_1016_j_jfma_2018_01_008
PublicationCentury 2000
PublicationDate 2018-07-01
PublicationDateYYYYMMDD 2018-07-01
PublicationDate_xml – month: 07
  year: 2018
  text: 2018-07-01
  day: 01
PublicationDecade 2010
PublicationPlace Singapore
PublicationPlace_xml – name: Singapore
PublicationTitle Journal of the Formosan Medical Association
PublicationTitleAlternate J Formos Med Assoc
PublicationYear 2018
Publisher Elsevier B.V
Elsevier
Publisher_xml – name: Elsevier B.V
– name: Elsevier
References Shqaidef, Ayoub, Khambay (bib54) 2014; 52
O'Neil, Khambay, Bowman, Moos, Barbenel, Walker (bib91) 2012; 50
Bengtsson, Wall, Miranda-Burgos, Rasmusson (bib21) 2017 Feb 13
Li, Shen, Yu, Li, Xia, Wang (bib74) 2016; 45
A1, Atala (bib33) 2015; 43
Francisco, Jessica, Joao, David, Francisco, Luisa (bib51) 2016; 21
Cevidanes, Bailey, Tucker, Styner, Mol, Phillips (bib2) 2007; 131
Hernandez-Alfaro, Guijarro-Martinez (bib55) 2013; 42
Olszewski, Tranduy, Reychler (bib70) 2010; 39
Stokbro, Aagaard, Torkov, Bell, Thygesen (bib43) 2016; 45
Zhou, Xu, Ye, Long, Yang, Lai (bib57) 2015; 44
Stokbro, Aagaard, Torkov, Bell, Thygesen (bib10) 2014; 43
Xia, Ip, Samman, Wang, Kot, Yeung (bib1) 2000; 29
Terajima, Nakasima, Aoki, Goto, Tokumori, Mori (bib3) 2009; 136
Zhao, Yao, Ouyang, Ding, Zhang, Zhang (bib35) 2014; 6
Kang, Lee, Lim, Kim, Kim (bib72) 2014; 72
Scolozzi, Herzog (bib49) 2014; 72
Sun, Luebbers, Agbaje, Schepers, Vrielinck, Lambrichts (bib24) 2013; 41
Zinser, Sailer, Ritter, Braumann, Maegele, Zöller (bib64) 2013; 71
Lim, Kim, Kang (bib73) 2015; 37
Polley, Figureueroa (bib65) 2013; 71
Uechi, Tsuji, Konno, Hayashi, Shibata, Nakayama (bib13) 2015; 44
Shirotaa, Shiogamaa, Watanabea, Kuriharaa, Yamaguchib, Makib (bib19) 2016; 28
Lin, Chang, Lo (bib85) 2015; 10
De Riu, Meloni, Baj, Corda, Soma, Tullio (bib8) 2014; 52
Shafiee, Salleh, Yahaya (bib29) 2008
Bai, Bo, Bi, Wang, Zhao, Liu (bib79) 2010; 110
Zinser, Mischkowski, Sailer, Zöller (bib63) 2012; 113
Shehab, Barakat, AbdElghany, Mostafa, Baur (bib81) 2013; 115
Lutz, Nicolau, Agnus, Bodin, Wilk, Bruant-Rodier (bib11) 2015; 43
Lee, Kwon, Choi (bib84) 2015; 73
Kraeima, Jansma, Schepers (bib78) 2016; 54
Ayoub, Rehab, O'Neil, Khambay, Ju, Barbenel (bib92) 2014; 43
Philippe (bib83) 2015; 44
Tamayol, Najafabadi, Aliakbarian, Arab-Tehrany, Akbari, Annabi (bib37) 2015; 4
Choi, Hwang, Baek (bib47) 2012; 113
Lee, Lim, Kim, Kang (bib93) 2015; 120
Schouman, Rouch, Imholz, Fasel, Courvoisier, Scolozzi (bib56) 2015; 25
Dumrongwongsiri, Lo (bib87) 2016
He, Sun, Tian, Xie, Wang, Li (bib36) 2015; 73
Bai, Shang, Liu, Zhao, Zhao (bib80) 2012; 70
Metzger, Hohlweg-Majert, Schwarz, Teschner, Hammer, Schmelzeisen (bib45) 2008; 105
Choi, Song, Baek (bib46) 2009; 38
Lee, Choi, Wu, Lee (bib23) 2013; 5
Suojanen, Leikola, Stoor (bib69) 2016; 44
Haas, Becker, de Oliveira (bib9) 2015 March; 44
Liu, Li, Zhang, Li, Xie, Zhang (bib16) 2016; 45
Mavili, Canter, Saglam-Aydinatay, Kamaci, Kocadereli (bib89) 2007; 18
Sun, Luebbers, Agbaje, Schepers, Vrielinck, Lambrichts (bib40) 2013; 24
Peter, Brain (bib67) 2016; 2
Dahan, Le Gall, Julié, Salvadori (bib52) 2011; 9
Niu, Lin, Lo (bib62) 2016
Suenaga, Taniguchi, Yonenaga, Hoshi, Takato (bib18) 2016; 28
Ying, Ye, Jiang, Liu, Hu, Zhu (bib58) 2015; 44
Adolphs, Liu, Keeve, Hoffmeister (bib41) 2014; 19
Jimenez, Colmenero-Ruíz, Rosón-Gómez, Encinas-Bascones (bib66) 2013; 42
Yamauchi, Yamaguchi, Katoh HTakahashi (bib75) 2016; 54
CJ1, Gilmore, Wallace, In het Panhuis (bib31) 2013; 97
Coachman, Calamita, Coachman, Coachman, Sesma (bib38) 2016; 3913
Aboul-Hosn Centenero, Hernandez-Alfaro (bib53) 2012; 40
Pietruski, Majak, Swiatek-Najwer, Popek, Szram, Zuk (bib17) 2016; 45
Gander, Bredell, Eliades, Rücker, Essig (bib77) 2015; 43
Lauren, McIntyre (bib44) 2008; 133
Olszewski, Szymor, Kozakiewicz (bib71) 2014; 42
Samad, Salleh, Shafiee, Yarmo (bib30) 2011; 40
Song, Baek (bib60) 2009; 107
Bobek (bib7) 2014; 26
Cassetta, Giansanti, Di Mambro, Calasso, Barbato (bib15) 2016; 45
Lonic, Pai, Yamaguchi, Chortrakarnkij, Lin, Lo (bib6) 2016; 11
Huang, Lo, Lin (bib88) 2016; 1
Kim, Lee, Park, Kim, Zhengguo, Yu (bib61) 2011; 111
Badiali, Ferrari, Cutolo, Freschi, Caramella, Bianchi (bib4) 2014; 42
Murphy, Atala (bib32) 2014; 32
Farré-Guasch, Wolff, Helder, Schulten, Forouzanfar, Klein-Nulend (bib27) 2015; 73
Brunso, Franco, Constantinescu, Barbier, Santamaria, Alvarez (bib86) 2016; 74
Movahed, Wolford (bib12) 2015; 27
Ciocca, Mazzoni, Fantini, Persiani, Marchetti, Scotti (bib22) 2012; 40
Wolford (bib20) 2016; 24
Cassetta, Pandolfi, Giansanti (bib25) 2015; 44
Jardini, Larosa, Macedo, Bernardes, Lambert, Zavaglia (bib39) 2016; 49
Shafiee, Atala (bib28) 2016; 22
Li, Zhang, Sun, Yuan, Shen, Wang (bib82) 2013; 51
Genina, Fors, Vakili, Ihalainen, Pohjala, Ehlers (bib34) 2012; 47
Shaheen, Sun, Jacobs, Politis (bib59) 2017; 46
Ibrahim, Broilo, Heitz, de Oliveira, de Oliveira, Nobre (bib90) 2009; 37
Zhang, Liu, Hu, Hu, Zhu, Li (bib68) 2016; 122
Scolozzi (bib50) 2015; 116
Edwards (bib5) 2010; 22
Van Hemelen, Van Genechten, Renier, Desmedt, Verbruggen, Nadjmi (bib14) 2015; 43
Uribe, Janakiraman, Shafer, Nanda (bib48) 2013; 144
Elias, Ferraz, Sato, Winkler (bib42) 2013; 42
Mazzoni, Bianchi, Schiariti, Badiali, Marchetti (bib76) 2015; 73
Dong, Li, Bai, Zhang (bib26) 2015; 73
Jimenez (10.1016/j.jfma.2018.01.008_bib66) 2013; 42
Huang (10.1016/j.jfma.2018.01.008_bib88) 2016; 1
Shirotaa (10.1016/j.jfma.2018.01.008_bib19) 2016; 28
Tamayol (10.1016/j.jfma.2018.01.008_bib37) 2015; 4
Lee (10.1016/j.jfma.2018.01.008_bib84) 2015; 73
Olszewski (10.1016/j.jfma.2018.01.008_bib70) 2010; 39
Song (10.1016/j.jfma.2018.01.008_bib60) 2009; 107
Scolozzi (10.1016/j.jfma.2018.01.008_bib50) 2015; 116
Sun (10.1016/j.jfma.2018.01.008_bib24) 2013; 41
Lee (10.1016/j.jfma.2018.01.008_bib23) 2013; 5
Lonic (10.1016/j.jfma.2018.01.008_bib6) 2016; 11
Kang (10.1016/j.jfma.2018.01.008_bib72) 2014; 72
Cassetta (10.1016/j.jfma.2018.01.008_bib15) 2016; 45
Yamauchi (10.1016/j.jfma.2018.01.008_bib75) 2016; 54
Li (10.1016/j.jfma.2018.01.008_bib74) 2016; 45
Lutz (10.1016/j.jfma.2018.01.008_bib11) 2015; 43
Jardini (10.1016/j.jfma.2018.01.008_bib39) 2016; 49
Mavili (10.1016/j.jfma.2018.01.008_bib89) 2007; 18
Lee (10.1016/j.jfma.2018.01.008_bib93) 2015; 120
Scolozzi (10.1016/j.jfma.2018.01.008_bib49) 2014; 72
Gander (10.1016/j.jfma.2018.01.008_bib77) 2015; 43
Coachman (10.1016/j.jfma.2018.01.008_bib38) 2016; 3913
Adolphs (10.1016/j.jfma.2018.01.008_bib41) 2014; 19
Choi (10.1016/j.jfma.2018.01.008_bib47) 2012; 113
Ayoub (10.1016/j.jfma.2018.01.008_bib92) 2014; 43
He (10.1016/j.jfma.2018.01.008_bib36) 2015; 73
Metzger (10.1016/j.jfma.2018.01.008_bib45) 2008; 105
Zinser (10.1016/j.jfma.2018.01.008_bib64) 2013; 71
Dahan (10.1016/j.jfma.2018.01.008_bib52) 2011; 9
Lim (10.1016/j.jfma.2018.01.008_bib73) 2015; 37
Choi (10.1016/j.jfma.2018.01.008_bib46) 2009; 38
Kraeima (10.1016/j.jfma.2018.01.008_bib78) 2016; 54
Ying (10.1016/j.jfma.2018.01.008_bib58) 2015; 44
Samad (10.1016/j.jfma.2018.01.008_bib30) 2011; 40
Suojanen (10.1016/j.jfma.2018.01.008_bib69) 2016; 44
Zinser (10.1016/j.jfma.2018.01.008_bib63) 2012; 113
Terajima (10.1016/j.jfma.2018.01.008_bib3) 2009; 136
Ibrahim (10.1016/j.jfma.2018.01.008_bib90) 2009; 37
Francisco (10.1016/j.jfma.2018.01.008_bib51) 2016; 21
Bobek (10.1016/j.jfma.2018.01.008_bib7) 2014; 26
Polley (10.1016/j.jfma.2018.01.008_bib65) 2013; 71
Ciocca (10.1016/j.jfma.2018.01.008_bib22) 2012; 40
Murphy (10.1016/j.jfma.2018.01.008_bib32) 2014; 32
Shqaidef (10.1016/j.jfma.2018.01.008_bib54) 2014; 52
Olszewski (10.1016/j.jfma.2018.01.008_bib71) 2014; 42
Brunso (10.1016/j.jfma.2018.01.008_bib86) 2016; 74
Shafiee (10.1016/j.jfma.2018.01.008_bib28) 2016; 22
Genina (10.1016/j.jfma.2018.01.008_bib34) 2012; 47
A1 (10.1016/j.jfma.2018.01.008_bib33) 2015; 43
Elias (10.1016/j.jfma.2018.01.008_bib42) 2013; 42
Shehab (10.1016/j.jfma.2018.01.008_bib81) 2013; 115
O'Neil (10.1016/j.jfma.2018.01.008_bib91) 2012; 50
Bai (10.1016/j.jfma.2018.01.008_bib79) 2010; 110
Badiali (10.1016/j.jfma.2018.01.008_bib4) 2014; 42
Edwards (10.1016/j.jfma.2018.01.008_bib5) 2010; 22
Cevidanes (10.1016/j.jfma.2018.01.008_bib2) 2007; 131
Li (10.1016/j.jfma.2018.01.008_bib82) 2013; 51
Stokbro (10.1016/j.jfma.2018.01.008_bib43) 2016; 45
Van Hemelen (10.1016/j.jfma.2018.01.008_bib14) 2015; 43
Shafiee (10.1016/j.jfma.2018.01.008_bib29) 2008
Cassetta (10.1016/j.jfma.2018.01.008_bib25) 2015; 44
Philippe (10.1016/j.jfma.2018.01.008_bib83) 2015; 44
Xia (10.1016/j.jfma.2018.01.008_bib1) 2000; 29
Zhang (10.1016/j.jfma.2018.01.008_bib68) 2016; 122
Niu (10.1016/j.jfma.2018.01.008_bib62) 2016
Haas (10.1016/j.jfma.2018.01.008_bib9) 2015; 44
Lauren (10.1016/j.jfma.2018.01.008_bib44) 2008; 133
Hernandez-Alfaro (10.1016/j.jfma.2018.01.008_bib55) 2013; 42
Kim (10.1016/j.jfma.2018.01.008_bib61) 2011; 111
Sun (10.1016/j.jfma.2018.01.008_bib40) 2013; 24
Shaheen (10.1016/j.jfma.2018.01.008_bib59) 2017; 46
Stokbro (10.1016/j.jfma.2018.01.008_bib10) 2014; 43
Pietruski (10.1016/j.jfma.2018.01.008_bib17) 2016; 45
Bengtsson (10.1016/j.jfma.2018.01.008_bib21) 2017
Peter (10.1016/j.jfma.2018.01.008_bib67) 2016; 2
Lin (10.1016/j.jfma.2018.01.008_bib85) 2015; 10
Wolford (10.1016/j.jfma.2018.01.008_bib20) 2016; 24
Dong (10.1016/j.jfma.2018.01.008_bib26) 2015; 73
Mazzoni (10.1016/j.jfma.2018.01.008_bib76) 2015; 73
Bai (10.1016/j.jfma.2018.01.008_bib80) 2012; 70
Zhou (10.1016/j.jfma.2018.01.008_bib57) 2015; 44
De Riu (10.1016/j.jfma.2018.01.008_bib8) 2014; 52
Uechi (10.1016/j.jfma.2018.01.008_bib13) 2015; 44
Farré-Guasch (10.1016/j.jfma.2018.01.008_bib27) 2015; 73
Aboul-Hosn Centenero (10.1016/j.jfma.2018.01.008_bib53) 2012; 40
Movahed (10.1016/j.jfma.2018.01.008_bib12) 2015; 27
Zhao (10.1016/j.jfma.2018.01.008_bib35) 2014; 6
CJ1 (10.1016/j.jfma.2018.01.008_bib31) 2013; 97
Schouman (10.1016/j.jfma.2018.01.008_bib56) 2015; 25
Liu (10.1016/j.jfma.2018.01.008_bib16) 2016; 45
Suenaga (10.1016/j.jfma.2018.01.008_bib18) 2016; 28
Uribe (10.1016/j.jfma.2018.01.008_bib48) 2013; 144
Dumrongwongsiri (10.1016/j.jfma.2018.01.008_bib87) 2016
References_xml – volume: 43
  start-page: 918
  year: 2015
  end-page: 925
  ident: bib14
  article-title: Three−dimensional virtual planning in orthognathic surgery enhances the accuracy of soft tissue prediction
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Nadjmi
– volume: 40
  start-page: 251
  year: 2011
  end-page: 257
  ident: bib30
  article-title: Structural, optical and electrical properties of fluorine doped tin oxide thin films deposited using inkjet printing technique
  publication-title: Sains Malays
  contributor:
    fullname: Yarmo
– volume: 32
  start-page: 773
  year: 2014
  end-page: 785
  ident: bib32
  article-title: 3D bioprinting of tissues and organs
  publication-title: Nat Biotechnol
  contributor:
    fullname: Atala
– volume: 44
  start-page: e123
  year: 2015
  ident: bib83
  article-title: Computer designed guides and miniplates in orthognathic surgery: a description of the planning and surgical technique
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Philippe
– volume: 38
  start-page: 1306
  year: 2009
  end-page: 1310
  ident: bib46
  article-title: Virtual model surgery and wafer fabrication for orthognathic surgery
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Baek
– volume: 25
  start-page: 11
  year: 2015
  end-page: 24
  ident: bib56
  article-title: Accuracy evaluation of CAD/CAM generated splints in orthognathic surgery: a cadaveric study
  publication-title: Head Face Med
  contributor:
    fullname: Scolozzi
– volume: 45
  start-page: 560
  year: 2016
  end-page: 566
  ident: bib74
  article-title: A new design of CAD/CAM surgical template system for two−piece narrowing genioplasty
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Wang
– volume: 37
  start-page: 167
  year: 2009
  end-page: 173
  ident: bib90
  article-title: Dimensional error of selective laser sintering, three−dimensional printing and PolyJet models in the reproduction of mandibular anatomy
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Nobre
– volume: 29
  start-page: 11
  year: 2000
  end-page: 17
  ident: bib1
  article-title: Computer−assisted three-dimensional surgical planning and simulation: 3D virtual osteotomy
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Yeung
– volume: 19
  start-page: 20
  year: 2014
  end-page: 28
  ident: bib41
  article-title: RapidSplint: virtual splint generation for orthognathic surgery−results of a pilot series
  publication-title: Comput Aided Surg
  contributor:
    fullname: Hoffmeister
– volume: 72
  start-page: 991
  year: 2014
  end-page: 999
  ident: bib49
  article-title: Total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and computer-aided designed and manufactured surgical splints: a favorable combination of three techniques in the management of severe mouth asymmetry in Parry−Romberg syndrome
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Herzog
– volume: 40
  start-page: e511
  year: 2012
  end-page: e515
  ident: bib22
  article-title: CAD/CAM guided secondary mandibular reconstruction of a discontinuity defect after ablative cancer surgery
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Scotti
– volume: 24
  start-page: 55
  year: 2016
  end-page: 66
  ident: bib20
  article-title: Computer−Assisted surgical simulation for concomitant temporomandibular joint Custom−Fitted total joint reconstruction and orthognathic surgery
  publication-title: Atlas Oral Maxillofac Surg Clin North Am
  contributor:
    fullname: Wolford
– volume: 107
  start-page: 13
  year: 2009
  end-page: 21
  ident: bib60
  article-title: Comparison of the accuracy of the three-dimensional virtual method and the conventional manual method for model surgery and intermediate wafer fabrication
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  contributor:
    fullname: Baek
– volume: 42
  start-page: 1547
  year: 2013
  end-page: 1556
  ident: bib55
  article-title: New protocol for three−dimensional surgical planning and CAD/CAM splint generation in orthognathic surgery: an in vitro and in vivo study
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Guijarro-Martinez
– volume: 70
  start-page: 2419
  year: 2012
  end-page: 2426
  ident: bib80
  article-title: Computer−aided design and computer−aided manufacturing locating guides accompanied with prebent titanium plates in orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Zhao
– volume: 1
  start-page: 49
  year: 2016
  end-page: 56
  ident: bib88
  article-title: Biomechanical optimization of a custom−made positioning and fixing bone plate for Le Fort I osteotomy by finite element analysis
  publication-title: Comput Biol Med
  contributor:
    fullname: Lin
– volume: 40
  start-page: 162
  year: 2012
  end-page: 168
  ident: bib53
  article-title: 3D planning in orthognathic surgery: CAD/CAM surgical splints and prediction of the soft and hard tissues results - our experience in 16 cases
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Hernandez-Alfaro
– volume: 45
  start-page: 1059
  year: 2016
  end-page: 1064
  ident: bib15
  article-title: Minimally invasive corticotomy in orthodontics using a three−dimensional printed CAD/CAM surgical guide
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Barbato
– volume: 49
  start-page: 203
  year: 2016
  end-page: 208
  ident: bib39
  article-title: Improvement in cranioplasty: advanced prosthesis biomanufacturing
  publication-title: Procedia CIRP
  contributor:
    fullname: Zavaglia
– volume: 6
  start-page: 035001
  year: 2014
  ident: bib35
  article-title: Three−dimensional printing of Hela cells for cervical tumor model in vitro
  publication-title: Biofabrication
  contributor:
    fullname: Zhang
– start-page: 41
  year: 2016
  ident: bib62
  article-title: A novel CAD/CAM surgical splint for OGS intraoperative validation of the soft-hard tissue results
  publication-title: The 11th Biennial Congress of the Asian Pacific Craniofacial Association
  contributor:
    fullname: Lo
– volume: 46
  start-page: 67
  year: 2017
  end-page: 71
  ident: bib59
  article-title: Three−dimensional printed final occlusal splint for orthognathic surgery: design and validation
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Politis
– volume: 42
  start-page: 1327
  year: 2013
  ident: bib42
  article-title: Accurate positioning of the mandibular proximal segments in reconstructive and orthognathic surgery. The role of the virtual planning and CAD−CAM technology
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Winkler
– volume: 43
  start-page: 319
  year: 2015
  end-page: 322
  ident: bib77
  article-title: Splintless orthognathic surgery: a novel technique using patient−specific implants (PSI)
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Essig
– volume: 54
  start-page: 1085
  year: 2016
  end-page: 1089
  ident: bib78
  article-title: Splintless surgery: does patient−specific CAD−CAM osteosynthesis improve accuracy of Le Fort I osteotomy?
  publication-title: Br J Oral Maxillofac Surg
  contributor:
    fullname: Schepers
– volume: 110
  start-page: e1
  year: 2010
  end-page: 7
  ident: bib79
  article-title: CAD/CAM surface templates as an alternative to the intermediate wafer in orthognathic surgery
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  contributor:
    fullname: Liu
– volume: 45
  start-page: 8
  year: 2016
  end-page: 18
  ident: bib43
  article-title: Surgical accuracy of three−dimensional virtual planning: a pilot study of bimaxillary orthognathic procedures including maxillary segmentation
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Thygesen
– volume: 37
  start-page: 44
  year: 2015
  ident: bib73
  article-title: Genioplasty using a simple CAD/CAM (computer−aided design and computer−aided manufacturing) surgical guide
  publication-title: Maxillofac Plast Reconstr Surg
  contributor:
    fullname: Kang
– volume: 39
  start-page: 721
  year: 2010
  end-page: 724
  ident: bib70
  article-title: Innovative procedure for computer−assisted genioplasty: three−dimensional cephalometry, rapid−prototyping model and surgical splint
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Reychler
– volume: 42
  start-page: 1847
  year: 2014
  end-page: 1852
  ident: bib71
  article-title: Accuracy of three−dimensional, paper−based models generated using a low−cost, three−dimensional printer
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Kozakiewicz
– volume: 122
  start-page: 143
  year: 2016
  end-page: 151
  ident: bib68
  article-title: Accuracy of virtual surgical planning in two−jaw orthognathic surgery: comparison of planned and actual results
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  contributor:
    fullname: Li
– volume: 42
  start-page: 1970
  year: 2014
  end-page: 1976
  ident: bib4
  article-title: Augmented reality as an aid in maxillofacial surgery: validation of a wearable system allowing maxillary repositioning
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Bianchi
– volume: 74
  start-page: e1
  year: 2016
  end-page: 2
  ident: bib86
  article-title: Custom−machined miniplates and bone−supported guides for orthognathic surgery: a new surgical procedure
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Alvarez
– volume: 18
  start-page: 740
  year: 2007
  end-page: 747
  ident: bib89
  article-title: Use of three−dimensional medical modeling methods for precise planning of orthognathic surgery
  publication-title: J Craniofac Surg
  contributor:
    fullname: Kocadereli
– volume: 5
  start-page: 045003
  year: 2013
  ident: bib23
  article-title: Customized biomimetic scaffolds created by indirect three−dimensional printing for tissue engineering
  publication-title: Biofabrication
  contributor:
    fullname: Lee
– volume: 27
  start-page: 37
  year: 2015
  end-page: 45
  ident: bib12
  article-title: Protocol for concomitant temporomandibular joint custom-fitted total joint reconstruction and orthognathic surgery using computer-assisted surgical simulation
  publication-title: Oral Maxillofac Surg Clin North Am
  contributor:
    fullname: Wolford
– volume: 115
  start-page: e16
  year: 2013
  end-page: 25
  ident: bib81
  article-title: A novel design of a computer−generated splint for vertical repositioning of the maxilla after Le Fort I osteotomy
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  contributor:
    fullname: Baur
– volume: 47
  start-page: 615
  year: 2012
  end-page: 623
  ident: bib34
  article-title: Tailoring controlled−release oral dosage forms by combining inkjet and flexographic printing techniques
  publication-title: Eur J Pharmaceut Sci
  contributor:
    fullname: Ehlers
– volume: 51
  start-page: e239
  year: 2013
  end-page: e244
  ident: bib82
  article-title: A novel method of computer aided orthognathic surgery using individual CAD/CAM templates: a combination of osteotomy and repositioning guides
  publication-title: Br J Oral Maxillofac Surg
  contributor:
    fullname: Wang
– volume: 28
  start-page: 530
  year: 2016
  end-page: 534
  ident: bib19
  article-title: Three−dimensional virtual planning and intraoperative navigation for two-jaw orthognathic surgery
  publication-title: J Oral Maxillofac Surg Med Pathol
  contributor:
    fullname: Makib
– volume: 73
  start-page: 2162
  year: 2015
  end-page: 2168
  ident: bib36
  article-title: Novel arch bar fabricated with a computer−aided design and three−dimensional printing: a feasibility study
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Li
– year: 2016
  ident: bib87
  article-title: Maximizing the aesthetic outcome: the CAD/CAM customized, 3D−printed spacers in orthognathic surgery
  publication-title: The 11th biennial Congress of the Asian Pacific Craniofacial Association, Japan
  contributor:
    fullname: Lo
– volume: 144
  start-page: 748
  year: 2013
  end-page: 758
  ident: bib48
  article-title: Three−dimensional cone-beam computed tomography−based virtual treatment planning and fabrication of a surgical splint for asymmetric patients: surgery first approach
  publication-title: Am J Orthod Dentofacial Orthop
  contributor:
    fullname: Nanda
– volume: 9
  start-page: 42
  year: 2011
  end-page: 62
  ident: bib52
  article-title: New protocols for the manufacture of surgical splints in surgical−orthodontic treatment
  publication-title: Int Orthod
  contributor:
    fullname: Salvadori
– volume: 73
  start-page: 2408
  year: 2015
  end-page: 2418
  ident: bib27
  article-title: Application of additive manufacturing in oral and maxillofacial surgery
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Klein-Nulend
– volume: 43
  start-page: 730
  year: 2015
  end-page: 746
  ident: bib33
  article-title: Biomaterials for integration with 3D bioprinting
  publication-title: Ann Biomed Eng
  contributor:
    fullname: Atala
– volume: 44
  start-page: 462
  year: 2015
  end-page: 469
  ident: bib13
  article-title: Generation of virtual models for planning orthognathic surgery using a modified multimodal image fusion technique
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Nakayama
– volume: 136
  start-page: 857
  year: 2009
  end-page: 867
  ident: bib3
  article-title: A 3−dimensional method for analyzing the morphology of patients with maxillofacial deformities
  publication-title: Am J Orthod Dentofacial Orthop
  contributor:
    fullname: Mori
– volume: 72
  start-page: 2032
  year: 2014
  end-page: 2042
  ident: bib72
  article-title: Validation of mandibular genioplasty using a stereolithographic surgical guide: in vitro comparison with a manual measurement method based on preoperative surgical simulation
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Kim
– volume: 54
  start-page: 1134
  year: 2016
  end-page: 1135
  ident: bib75
  article-title: Tooth−bone CAD/CAM surgical guide for genioplasty
  publication-title: Br J Oral Maxillofac Surg
  contributor:
    fullname: Katoh HTakahashi
– volume: 44
  start-page: 329
  year: 2015 March
  end-page: 342
  ident: bib9
  article-title: Computer−aided planning in orthognathic surgery-systematic review
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: de Oliveira
– volume: 50
  start-page: 49
  year: 2012
  end-page: 54
  ident: bib91
  article-title: Validation of a new method for building a three−-dimensional physical model of the skull and dentition
  publication-title: Br J Oral Maxillofac Surg
  contributor:
    fullname: Walker
– volume: 22
  start-page: 254
  year: 2016
  end-page: 265
  ident: bib28
  article-title: Printing technologies for medical applications
  publication-title: Trends Mol Med
  contributor:
    fullname: Atala
– start-page: 319
  year: 2008
  end-page: 322
  ident: bib29
  article-title: Fabrication of organic solar cells based on a blend of poly (3−octylthiophene−2, 5−diyl) and fullerene derivative using inkjet printing technique
  publication-title: IEEE International Conference on Semiconductor Electronics, ICSE
  contributor:
    fullname: Yahaya
– volume: 44
  start-page: 830
  year: 2015
  end-page: 833
  ident: bib25
  article-title: Minimally invasive corticotomy in orthodontics: a new technique using a CAD/CAM surgical template
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Giansanti
– volume: 43
  start-page: 957
  year: 2014
  end-page: 965
  ident: bib10
  article-title: Virtual planning in orthognathic surgery
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Thygesen
– volume: 21
  start-page: 89
  year: 2016
  end-page: 100
  ident: bib51
  article-title: 3D virtual planning in orthognathic surgery and CAD/CAM surgical splints generation in one patient with craniofacial microsomia: a case report
  publication-title: Dental Press J Orthod
  contributor:
    fullname: Luisa
– volume: 133
  start-page: S130
  year: 2008
  end-page: S135
  ident: bib44
  article-title: A new computer−assisted method for design and fabrication of occlusal splints
  publication-title: Am J Orthod Dentofacial Orthop
  contributor:
    fullname: McIntyre
– volume: 131
  start-page: 44
  year: 2007
  end-page: 50
  ident: bib2
  article-title: Three−dimensional cone-beam computed tomography for assessment of mandibular changes after orthognathic surgery
  publication-title: Am J Orthod Dentofac Orthop
  contributor:
    fullname: Phillips
– volume: 22
  start-page: 117
  year: 2010
  end-page: 134
  ident: bib5
  article-title: Computer−Assisted craniomaxillofacial surgery
  publication-title: Oral Maxillofac Surg Clin North Am
  contributor:
    fullname: Edwards
– volume: 97
  start-page: 4243
  year: 2013
  end-page: 4258
  ident: bib31
  article-title: Biofabrication: An overview of the approaches used for printing of living cells
  publication-title: Appl Microbiol Biotechnol
  contributor:
    fullname: In het Panhuis
– volume: 113
  start-page: 193
  year: 2012
  end-page: 200
  ident: bib47
  article-title: Virtual model surgery and wafer fabrication using 2−dimensional cephalograms, 3−dimensional virtual dental models, and stereolithographic technology
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  contributor:
    fullname: Baek
– volume: 24
  start-page: 1871
  year: 2013
  end-page: 1876
  ident: bib40
  article-title: Accuracy of upper jaw positioning with intermediate splint fabrication after virtual planning in bimaxillary orthognathic surgery
  publication-title: J Craniofac Surg
  contributor:
    fullname: Lambrichts
– volume: 52
  start-page: 251
  year: 2014
  end-page: 257
  ident: bib8
  article-title: Computer−assisted orthognathic surgery for correction of facial asymmetry: results of a randomised controlled clinical
  publication-title: Br J Oral Maxillofac Surg
  contributor:
    fullname: Tullio
– volume: 11
  start-page: e0152014
  year: 2016
  ident: bib6
  article-title: Computer−assisted orthognathic surgery for patients with cleft lip/palate: from traditional planning to three-dimensional surgical simulation
  publication-title: PLoS One
  contributor:
    fullname: Lo
– volume: 71
  start-page: e1
  year: 2013
  end-page: 21
  ident: bib64
  article-title: A paradigm shift in orthognathic surgery? A comparison of navigation, computer−aided designed/computer−aided manufactured splints, and “classic” intermaxillary splints to surgical transfer of virtual orthognathic planning
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Zöller
– volume: 52
  start-page: 609
  year: 2014
  end-page: 614
  ident: bib54
  article-title: How accurate are rapid prototyped (RP) final orthognathic surgical wafers? A pilot study
  publication-title: Br J Oral Maxillofac Surg
  contributor:
    fullname: Khambay
– volume: 44
  start-page: e316
  year: 2015
  end-page: e317
  ident: bib57
  article-title: The accuracy of computer−aided simulation system protocol for positioning the maxilla with a intermediate splint in orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Lai
– volume: 71
  start-page: 911
  year: 2013
  end-page: 920
  ident: bib65
  article-title: Orthognathic positioning system: intraoperative system to transfer virtual surgical plan to operating field during orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Figureueroa
– volume: 28
  start-page: 246
  year: 2016
  end-page: 250
  ident: bib18
  article-title: Computer−assisted preoperative simulation for positioning and fixation of plate in 2−stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery
  publication-title: Int J Surg Case Rep
  contributor:
    fullname: Takato
– year: 2017 Feb 13
  ident: bib21
  article-title: Treatment outcome in orthognathic surgery −A prospective comparison of accuracy in computer assisted two and three-dimensional prediction techniques
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Rasmusson
– volume: 44
  start-page: 1913
  year: 2016
  end-page: 1916
  ident: bib69
  article-title: The use of patient−specific implants in orthognathic surgery: a series of 32 maxillary osteotomy patients
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Stoor
– volume: 43
  start-page: 1723
  year: 2015
  end-page: 1730
  ident: bib11
  article-title: A novel navigation system for maxillary positioning in orthognathic surgery: preclinical evaluation
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Bruant-Rodier
– volume: 41
  start-page: 522
  year: 2013
  end-page: 526
  ident: bib24
  article-title: Validation of anatomical landmarks-based registration for image−guided surgery: an in-vitro study
  publication-title: J Craniomaxillofac Surg
  contributor:
    fullname: Lambrichts
– volume: 2
  start-page: 1
  year: 2016
  end-page: 9
  ident: bib67
  article-title: Inverted L osteotomy: a new approach via intraoral access through the advances of virtual surgical planning and custom fixation
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Brain
– volume: 44
  start-page: 1330
  year: 2015
  end-page: 1336
  ident: bib58
  article-title: Correction of facial asymmetry associated with vertical maxillary excess and mandibular prognathism by combined orthognathic surgery and guiding templates and splints fabricated by rapid prototyping technique
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Zhu
– volume: 26
  start-page: 587
  year: 2014
  end-page: 598
  ident: bib7
  article-title: Applications of navigation for orthognathic surgery
  publication-title: Oral Maxillofac Surg Clin North Am
  contributor:
    fullname: Bobek
– volume: 45
  start-page: 793
  year: 2016
  end-page: 800
  ident: bib17
  article-title: Accuracy of experimental mandibular osteotomy using the image−guided sagittal saw
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Zuk
– volume: 42
  start-page: 1327
  year: 2013
  ident: bib66
  article-title: Inverted L osteotomy. indications and techniques
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Encinas-Bascones
– volume: 73
  start-page: 2024
  year: 2015
  end-page: 2029
  ident: bib84
  article-title: Keyhole system: a computer−assisted designed and computer−assisted manufactured maxillomandibular complex repositioner in orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Choi
– volume: 45
  start-page: 406
  year: 2016
  end-page: 411
  ident: bib16
  article-title: Virtual occlusal definition for orthognathic surgery
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Zhang
– volume: 4
  start-page: 2146
  year: 2015
  end-page: 2153
  ident: bib37
  article-title: Hydrogel templates for rapid manufacturing of bioactive fibers and 3D constructs
  publication-title: Adv Healthc Mater
  contributor:
    fullname: Annabi
– volume: 73
  start-page: 1970
  year: 2015
  end-page: 1976
  ident: bib26
  article-title: Application of 3−Dimensional printing technology to Kirschner wire fixation of adolescent condyle fracture
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Zhang
– volume: 10
  start-page: 2021
  year: 2015
  end-page: 2033
  ident: bib85
  article-title: Development of customized positioning guides using computer aided design and manufacturing technology for orthognathic surgery
  publication-title: Int J Comput Assist Radiol Surg
  contributor:
    fullname: Lo
– volume: 105
  start-page: e1
  year: 2008
  end-page: e7
  ident: bib45
  article-title: Manufacturing splints for orthognathic surgery using a three−dimensional printer
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  contributor:
    fullname: Schmelzeisen
– volume: 3913
  start-page: 30444
  year: 2016
  end-page: 30449
  ident: bib38
  article-title: Facially generated and cephalometric guided 3D digital design for complete mouth implant rehabilitation: a clinical report
  publication-title: J Prosthet Dent
  contributor:
    fullname: Sesma
– volume: 113
  start-page: 673
  year: 2012
  end-page: 687
  ident: bib63
  article-title: Computer−assisted orthognathic surgery: feasibility study using multiple CAD/CAM surgical splints
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  contributor:
    fullname: Zöller
– volume: 43
  start-page: 454
  year: 2014
  end-page: 459
  ident: bib92
  article-title: A novel approach for planning orthognathic surgery: the integration of dental casts into three−dimensional printed mandibular models
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Barbenel
– volume: 120
  start-page: 684
  year: 2015
  end-page: 692
  ident: bib93
  article-title: Precision of a CAD/CAM−engineered surgical template based on a facebow for orthognathic surgery: an experiment with a rapid prototyping maxillary model
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  contributor:
    fullname: Kang
– volume: 116
  start-page: 343
  year: 2015
  end-page: 349
  ident: bib50
  article-title: Computer−aided design and computer-aided modeling (CAD/CAM) generated surgical splints, cutting guides and custom-made implants: which indications in orthognathic surgery?
  publication-title: Rev Stomatol Chir Maxillofac Chir Orale
  contributor:
    fullname: Scolozzi
– volume: 111
  start-page: 278
  year: 2011
  end-page: 285
  ident: bib61
  article-title: Clinical experiences of digital model surgery and the rapid-prototyped wafer for maxillary orthognathic surgery
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  contributor:
    fullname: Yu
– volume: 73
  start-page: 701
  year: 2015
  end-page: 717
  ident: bib76
  article-title: C Computer−aided design and computer−aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Marchetti
– volume: 3913
  start-page: 30444
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib38
  article-title: Facially generated and cephalometric guided 3D digital design for complete mouth implant rehabilitation: a clinical report
  publication-title: J Prosthet Dent
  contributor:
    fullname: Coachman
– volume: 71
  start-page: 911
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib65
  article-title: Orthognathic positioning system: intraoperative system to transfer virtual surgical plan to operating field during orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2012.11.004
  contributor:
    fullname: Polley
– volume: 27
  start-page: 37
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib12
  article-title: Protocol for concomitant temporomandibular joint custom-fitted total joint reconstruction and orthognathic surgery using computer-assisted surgical simulation
  publication-title: Oral Maxillofac Surg Clin North Am
  doi: 10.1016/j.coms.2014.09.004
  contributor:
    fullname: Movahed
– volume: 74
  start-page: e1
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib86
  article-title: Custom−machined miniplates and bone−supported guides for orthognathic surgery: a new surgical procedure
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2016.01.016
  contributor:
    fullname: Brunso
– year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib87
  article-title: Maximizing the aesthetic outcome: the CAD/CAM customized, 3D−printed spacers in orthognathic surgery
  contributor:
    fullname: Dumrongwongsiri
– volume: 73
  start-page: 2408
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib27
  article-title: Application of additive manufacturing in oral and maxillofacial surgery
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2015.04.019
  contributor:
    fullname: Farré-Guasch
– volume: 42
  start-page: 1547
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib55
  article-title: New protocol for three−dimensional surgical planning and CAD/CAM splint generation in orthognathic surgery: an in vitro and in vivo study
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2013.03.025
  contributor:
    fullname: Hernandez-Alfaro
– volume: 71
  start-page: e1
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib64
  article-title: A paradigm shift in orthognathic surgery? A comparison of navigation, computer−aided designed/computer−aided manufactured splints, and “classic” intermaxillary splints to surgical transfer of virtual orthognathic planning
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2013.07.007
  contributor:
    fullname: Zinser
– volume: 113
  start-page: 193
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib47
  article-title: Virtual model surgery and wafer fabrication using 2−dimensional cephalograms, 3−dimensional virtual dental models, and stereolithographic technology
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  doi: 10.1016/j.tripleo.2011.02.003
  contributor:
    fullname: Choi
– volume: 11
  start-page: e0152014
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib6
  article-title: Computer−assisted orthognathic surgery for patients with cleft lip/palate: from traditional planning to three-dimensional surgical simulation
  publication-title: PLoS One
  doi: 10.1371/journal.pone.0152014
  contributor:
    fullname: Lonic
– start-page: 41
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib62
  article-title: A novel CAD/CAM surgical splint for OGS intraoperative validation of the soft-hard tissue results
  contributor:
    fullname: Niu
– volume: 54
  start-page: 1085
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib78
  article-title: Splintless surgery: does patient−specific CAD−CAM osteosynthesis improve accuracy of Le Fort I osteotomy?
  publication-title: Br J Oral Maxillofac Surg
  doi: 10.1016/j.bjoms.2016.07.007
  contributor:
    fullname: Kraeima
– year: 2017
  ident: 10.1016/j.jfma.2018.01.008_bib21
  article-title: Treatment outcome in orthognathic surgery −A prospective comparison of accuracy in computer assisted two and three-dimensional prediction techniques
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2017.07.001
  contributor:
    fullname: Bengtsson
– volume: 32
  start-page: 773
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib32
  article-title: 3D bioprinting of tissues and organs
  publication-title: Nat Biotechnol
  doi: 10.1038/nbt.2958
  contributor:
    fullname: Murphy
– volume: 51
  start-page: e239
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib82
  article-title: A novel method of computer aided orthognathic surgery using individual CAD/CAM templates: a combination of osteotomy and repositioning guides
  publication-title: Br J Oral Maxillofac Surg
  doi: 10.1016/j.bjoms.2013.03.007
  contributor:
    fullname: Li
– volume: 22
  start-page: 254
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib28
  article-title: Printing technologies for medical applications
  publication-title: Trends Mol Med
  doi: 10.1016/j.molmed.2016.01.003
  contributor:
    fullname: Shafiee
– volume: 1
  start-page: 49
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib88
  article-title: Biomechanical optimization of a custom−made positioning and fixing bone plate for Le Fort I osteotomy by finite element analysis
  publication-title: Comput Biol Med
  doi: 10.1016/j.compbiomed.2015.10.015
  contributor:
    fullname: Huang
– volume: 37
  start-page: 167
  year: 2009
  ident: 10.1016/j.jfma.2018.01.008_bib90
  article-title: Dimensional error of selective laser sintering, three−dimensional printing and PolyJet models in the reproduction of mandibular anatomy
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2008.10.008
  contributor:
    fullname: Ibrahim
– volume: 115
  start-page: e16
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib81
  article-title: A novel design of a computer−generated splint for vertical repositioning of the maxilla after Le Fort I osteotomy
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  doi: 10.1016/j.oooo.2011.09.035
  contributor:
    fullname: Shehab
– volume: 19
  start-page: 20
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib41
  article-title: RapidSplint: virtual splint generation for orthognathic surgery−results of a pilot series
  publication-title: Comput Aided Surg
  doi: 10.3109/10929088.2014.887778
  contributor:
    fullname: Adolphs
– volume: 9
  start-page: 42
  year: 2011
  ident: 10.1016/j.jfma.2018.01.008_bib52
  article-title: New protocols for the manufacture of surgical splints in surgical−orthodontic treatment
  publication-title: Int Orthod
  contributor:
    fullname: Dahan
– volume: 70
  start-page: 2419
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib80
  article-title: Computer−aided design and computer−aided manufacturing locating guides accompanied with prebent titanium plates in orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2011.12.017
  contributor:
    fullname: Bai
– volume: 42
  start-page: 1327
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib42
  article-title: Accurate positioning of the mandibular proximal segments in reconstructive and orthognathic surgery. The role of the virtual planning and CAD−CAM technology
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2013.07.539
  contributor:
    fullname: Elias
– volume: 26
  start-page: 587
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib7
  article-title: Applications of navigation for orthognathic surgery
  publication-title: Oral Maxillofac Surg Clin North Am
  doi: 10.1016/j.coms.2014.08.003
  contributor:
    fullname: Bobek
– volume: 43
  start-page: 454
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib92
  article-title: A novel approach for planning orthognathic surgery: the integration of dental casts into three−dimensional printed mandibular models
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2013.08.016
  contributor:
    fullname: Ayoub
– volume: 43
  start-page: 319
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib77
  article-title: Splintless orthognathic surgery: a novel technique using patient−specific implants (PSI)
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2014.12.003
  contributor:
    fullname: Gander
– volume: 21
  start-page: 89
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib51
  article-title: 3D virtual planning in orthognathic surgery and CAD/CAM surgical splints generation in one patient with craniofacial microsomia: a case report
  publication-title: Dental Press J Orthod
  doi: 10.1590/2177-6709.21.1.089-100.oar
  contributor:
    fullname: Francisco
– volume: 28
  start-page: 246
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib18
  article-title: Computer−assisted preoperative simulation for positioning and fixation of plate in 2−stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery
  publication-title: Int J Surg Case Rep
  doi: 10.1016/j.ijscr.2016.10.004
  contributor:
    fullname: Suenaga
– volume: 105
  start-page: e1
  year: 2008
  ident: 10.1016/j.jfma.2018.01.008_bib45
  article-title: Manufacturing splints for orthognathic surgery using a three−dimensional printer
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  doi: 10.1016/j.tripleo.2007.07.040
  contributor:
    fullname: Metzger
– volume: 38
  start-page: 1306
  year: 2009
  ident: 10.1016/j.jfma.2018.01.008_bib46
  article-title: Virtual model surgery and wafer fabrication for orthognathic surgery
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2009.06.009
  contributor:
    fullname: Choi
– volume: 136
  start-page: 857
  year: 2009
  ident: 10.1016/j.jfma.2018.01.008_bib3
  article-title: A 3−dimensional method for analyzing the morphology of patients with maxillofacial deformities
  publication-title: Am J Orthod Dentofacial Orthop
  doi: 10.1016/j.ajodo.2008.01.019
  contributor:
    fullname: Terajima
– volume: 44
  start-page: e316
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib57
  article-title: The accuracy of computer−aided simulation system protocol for positioning the maxilla with a intermediate splint in orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.08.413
  contributor:
    fullname: Zhou
– volume: 44
  start-page: 1913
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib69
  article-title: The use of patient−specific implants in orthognathic surgery: a series of 32 maxillary osteotomy patients
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2016.09.008
  contributor:
    fullname: Suojanen
– volume: 5
  start-page: 045003
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib23
  article-title: Customized biomimetic scaffolds created by indirect three−dimensional printing for tissue engineering
  publication-title: Biofabrication
  doi: 10.1088/1758-5082/5/4/045003
  contributor:
    fullname: Lee
– volume: 144
  start-page: 748
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib48
  article-title: Three−dimensional cone-beam computed tomography−based virtual treatment planning and fabrication of a surgical splint for asymmetric patients: surgery first approach
  publication-title: Am J Orthod Dentofacial Orthop
  doi: 10.1016/j.ajodo.2012.10.029
  contributor:
    fullname: Uribe
– volume: 40
  start-page: 162
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib53
  article-title: 3D planning in orthognathic surgery: CAD/CAM surgical splints and prediction of the soft and hard tissues results - our experience in 16 cases
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2011.03.014
  contributor:
    fullname: Aboul-Hosn Centenero
– volume: 54
  start-page: 1134
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib75
  article-title: Tooth−bone CAD/CAM surgical guide for genioplasty
  publication-title: Br J Oral Maxillofac Surg
  doi: 10.1016/j.bjoms.2016.03.012
  contributor:
    fullname: Yamauchi
– volume: 43
  start-page: 730
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib33
  article-title: Biomaterials for integration with 3D bioprinting
  publication-title: Ann Biomed Eng
  doi: 10.1007/s10439-014-1207-1
  contributor:
    fullname: A1
– volume: 45
  start-page: 793
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib17
  article-title: Accuracy of experimental mandibular osteotomy using the image−guided sagittal saw
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.12.018
  contributor:
    fullname: Pietruski
– volume: 52
  start-page: 609
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib54
  article-title: How accurate are rapid prototyped (RP) final orthognathic surgical wafers? A pilot study
  publication-title: Br J Oral Maxillofac Surg
  doi: 10.1016/j.bjoms.2014.04.010
  contributor:
    fullname: Shqaidef
– volume: 43
  start-page: 918
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib14
  article-title: Three−dimensional virtual planning in orthognathic surgery enhances the accuracy of soft tissue prediction
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2015.04.006
  contributor:
    fullname: Van Hemelen
– volume: 41
  start-page: 522
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib24
  article-title: Validation of anatomical landmarks-based registration for image−guided surgery: an in-vitro study
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2012.11.017
  contributor:
    fullname: Sun
– volume: 73
  start-page: 1970
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib26
  article-title: Application of 3−Dimensional printing technology to Kirschner wire fixation of adolescent condyle fracture
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2015.04.005
  contributor:
    fullname: Dong
– volume: 10
  start-page: 2021
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib85
  article-title: Development of customized positioning guides using computer aided design and manufacturing technology for orthognathic surgery
  publication-title: Int J Comput Assist Radiol Surg
  doi: 10.1007/s11548-015-1223-0
  contributor:
    fullname: Lin
– volume: 40
  start-page: e511
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib22
  article-title: CAD/CAM guided secondary mandibular reconstruction of a discontinuity defect after ablative cancer surgery
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2012.03.015
  contributor:
    fullname: Ciocca
– volume: 44
  start-page: 1330
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib58
  article-title: Correction of facial asymmetry associated with vertical maxillary excess and mandibular prognathism by combined orthognathic surgery and guiding templates and splints fabricated by rapid prototyping technique
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.05.012
  contributor:
    fullname: Ying
– volume: 24
  start-page: 55
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib20
  article-title: Computer−Assisted surgical simulation for concomitant temporomandibular joint Custom−Fitted total joint reconstruction and orthognathic surgery
  publication-title: Atlas Oral Maxillofac Surg Clin North Am
  doi: 10.1016/j.cxom.2015.10.006
  contributor:
    fullname: Wolford
– volume: 120
  start-page: 684
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib93
  article-title: Precision of a CAD/CAM−engineered surgical template based on a facebow for orthognathic surgery: an experiment with a rapid prototyping maxillary model
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  doi: 10.1016/j.oooo.2015.07.007
  contributor:
    fullname: Lee
– volume: 44
  start-page: 830
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib25
  article-title: Minimally invasive corticotomy in orthodontics: a new technique using a CAD/CAM surgical template
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.02.020
  contributor:
    fullname: Cassetta
– volume: 72
  start-page: 991
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib49
  article-title: Total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and computer-aided designed and manufactured surgical splints: a favorable combination of three techniques in the management of severe mouth asymmetry in Parry−Romberg syndrome
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2013.09.044
  contributor:
    fullname: Scolozzi
– volume: 2
  start-page: 1
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib67
  article-title: Inverted L osteotomy: a new approach via intraoral access through the advances of virtual surgical planning and custom fixation
  publication-title: J Oral Maxillofac Surg
  contributor:
    fullname: Peter
– volume: 39
  start-page: 721
  year: 2010
  ident: 10.1016/j.jfma.2018.01.008_bib70
  article-title: Innovative procedure for computer−assisted genioplasty: three−dimensional cephalometry, rapid−prototyping model and surgical splint
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2010.03.018
  contributor:
    fullname: Olszewski
– volume: 107
  start-page: 13
  year: 2009
  ident: 10.1016/j.jfma.2018.01.008_bib60
  article-title: Comparison of the accuracy of the three-dimensional virtual method and the conventional manual method for model surgery and intermediate wafer fabrication
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  doi: 10.1016/j.tripleo.2008.06.002
  contributor:
    fullname: Song
– volume: 45
  start-page: 1059
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib15
  article-title: Minimally invasive corticotomy in orthodontics using a three−dimensional printed CAD/CAM surgical guide
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2016.04.017
  contributor:
    fullname: Cassetta
– volume: 113
  start-page: 673
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib63
  article-title: Computer−assisted orthognathic surgery: feasibility study using multiple CAD/CAM surgical splints
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  doi: 10.1016/j.oooo.2011.11.009
  contributor:
    fullname: Zinser
– volume: 42
  start-page: 1847
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib71
  article-title: Accuracy of three−dimensional, paper−based models generated using a low−cost, three−dimensional printer
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2014.07.002
  contributor:
    fullname: Olszewski
– volume: 43
  start-page: 957
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib10
  article-title: Virtual planning in orthognathic surgery
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2014.03.011
  contributor:
    fullname: Stokbro
– volume: 43
  start-page: 1723
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib11
  article-title: A novel navigation system for maxillary positioning in orthognathic surgery: preclinical evaluation
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2015.08.001
  contributor:
    fullname: Lutz
– volume: 4
  start-page: 2146
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib37
  article-title: Hydrogel templates for rapid manufacturing of bioactive fibers and 3D constructs
  publication-title: Adv Healthc Mater
  doi: 10.1002/adhm.201500492
  contributor:
    fullname: Tamayol
– volume: 133
  start-page: S130
  year: 2008
  ident: 10.1016/j.jfma.2018.01.008_bib44
  article-title: A new computer−assisted method for design and fabrication of occlusal splints
  publication-title: Am J Orthod Dentofacial Orthop
  doi: 10.1016/j.ajodo.2007.11.018
  contributor:
    fullname: Lauren
– volume: 122
  start-page: 143
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib68
  article-title: Accuracy of virtual surgical planning in two−jaw orthognathic surgery: comparison of planned and actual results
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol
  doi: 10.1016/j.oooo.2016.03.004
  contributor:
    fullname: Zhang
– volume: 42
  start-page: 1970
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib4
  article-title: Augmented reality as an aid in maxillofacial surgery: validation of a wearable system allowing maxillary repositioning
  publication-title: J Craniomaxillofac Surg
  doi: 10.1016/j.jcms.2014.09.001
  contributor:
    fullname: Badiali
– volume: 46
  start-page: 67
  year: 2017
  ident: 10.1016/j.jfma.2018.01.008_bib59
  article-title: Three−dimensional printed final occlusal splint for orthognathic surgery: design and validation
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2016.10.002
  contributor:
    fullname: Shaheen
– volume: 50
  start-page: 49
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib91
  article-title: Validation of a new method for building a three−-dimensional physical model of the skull and dentition
  publication-title: Br J Oral Maxillofac Surg
  doi: 10.1016/j.bjoms.2010.11.009
  contributor:
    fullname: O'Neil
– volume: 111
  start-page: 278
  year: 2011
  ident: 10.1016/j.jfma.2018.01.008_bib61
  article-title: Clinical experiences of digital model surgery and the rapid-prototyped wafer for maxillary orthognathic surgery
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  doi: 10.1016/j.tripleo.2010.04.038
  contributor:
    fullname: Kim
– volume: 28
  start-page: 530
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib19
  article-title: Three−dimensional virtual planning and intraoperative navigation for two-jaw orthognathic surgery
  publication-title: J Oral Maxillofac Surg Med Pathol
  doi: 10.1016/j.ajoms.2016.06.007
  contributor:
    fullname: Shirotaa
– volume: 45
  start-page: 406
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib16
  article-title: Virtual occlusal definition for orthognathic surgery
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.07.022
  contributor:
    fullname: Liu
– start-page: 319
  year: 2008
  ident: 10.1016/j.jfma.2018.01.008_bib29
  article-title: Fabrication of organic solar cells based on a blend of poly (3−octylthiophene−2, 5−diyl) and fullerene derivative using inkjet printing technique
  publication-title: IEEE International Conference on Semiconductor Electronics, ICSE
  contributor:
    fullname: Shafiee
– volume: 97
  start-page: 4243
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib31
  article-title: Biofabrication: An overview of the approaches used for printing of living cells
  publication-title: Appl Microbiol Biotechnol
  doi: 10.1007/s00253-013-4853-6
  contributor:
    fullname: CJ1
– volume: 18
  start-page: 740
  year: 2007
  ident: 10.1016/j.jfma.2018.01.008_bib89
  article-title: Use of three−dimensional medical modeling methods for precise planning of orthognathic surgery
  publication-title: J Craniofac Surg
  doi: 10.1097/scs.0b013e318069014f
  contributor:
    fullname: Mavili
– volume: 44
  start-page: 462
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib13
  article-title: Generation of virtual models for planning orthognathic surgery using a modified multimodal image fusion technique
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2014.11.007
  contributor:
    fullname: Uechi
– volume: 6
  start-page: 035001
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib35
  article-title: Three−dimensional printing of Hela cells for cervical tumor model in vitro
  publication-title: Biofabrication
  doi: 10.1088/1758-5082/6/3/035001
  contributor:
    fullname: Zhao
– volume: 116
  start-page: 343
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib50
  article-title: Computer−aided design and computer-aided modeling (CAD/CAM) generated surgical splints, cutting guides and custom-made implants: which indications in orthognathic surgery?
  publication-title: Rev Stomatol Chir Maxillofac Chir Orale
  contributor:
    fullname: Scolozzi
– volume: 45
  start-page: 560
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib74
  article-title: A new design of CAD/CAM surgical template system for two−piece narrowing genioplasty
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.10.013
  contributor:
    fullname: Li
– volume: 40
  start-page: 251
  year: 2011
  ident: 10.1016/j.jfma.2018.01.008_bib30
  article-title: Structural, optical and electrical properties of fluorine doped tin oxide thin films deposited using inkjet printing technique
  publication-title: Sains Malays
  contributor:
    fullname: Samad
– volume: 72
  start-page: 2032
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib72
  article-title: Validation of mandibular genioplasty using a stereolithographic surgical guide: in vitro comparison with a manual measurement method based on preoperative surgical simulation
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2014.03.002
  contributor:
    fullname: Kang
– volume: 45
  start-page: 8
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib43
  article-title: Surgical accuracy of three−dimensional virtual planning: a pilot study of bimaxillary orthognathic procedures including maxillary segmentation
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2015.07.010
  contributor:
    fullname: Stokbro
– volume: 44
  start-page: e123
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib83
  article-title: Computer designed guides and miniplates in orthognathic surgery: a description of the planning and surgical technique
  publication-title: Int J Oral Maxillofac Surg
  contributor:
    fullname: Philippe
– volume: 73
  start-page: 2162
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib36
  article-title: Novel arch bar fabricated with a computer−aided design and three−dimensional printing: a feasibility study
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2015.03.044
  contributor:
    fullname: He
– volume: 73
  start-page: 2024
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib84
  article-title: Keyhole system: a computer−assisted designed and computer−assisted manufactured maxillomandibular complex repositioner in orthognathic surgery
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2015.03.026
  contributor:
    fullname: Lee
– volume: 73
  start-page: 701
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib76
  article-title: C Computer−aided design and computer−aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.joms.2014.10.028
  contributor:
    fullname: Mazzoni
– volume: 42
  start-page: 1327
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib66
  article-title: Inverted L osteotomy. indications and techniques
  publication-title: J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2013.07.541
  contributor:
    fullname: Jimenez
– volume: 22
  start-page: 117
  year: 2010
  ident: 10.1016/j.jfma.2018.01.008_bib5
  article-title: Computer−Assisted craniomaxillofacial surgery
  publication-title: Oral Maxillofac Surg Clin North Am
  doi: 10.1016/j.coms.2009.11.005
  contributor:
    fullname: Edwards
– volume: 37
  start-page: 44
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib73
  article-title: Genioplasty using a simple CAD/CAM (computer−aided design and computer−aided manufacturing) surgical guide
  publication-title: Maxillofac Plast Reconstr Surg
  doi: 10.1186/s40902-015-0044-y
  contributor:
    fullname: Lim
– volume: 47
  start-page: 615
  year: 2012
  ident: 10.1016/j.jfma.2018.01.008_bib34
  article-title: Tailoring controlled−release oral dosage forms by combining inkjet and flexographic printing techniques
  publication-title: Eur J Pharmaceut Sci
  doi: 10.1016/j.ejps.2012.07.020
  contributor:
    fullname: Genina
– volume: 24
  start-page: 1871
  year: 2013
  ident: 10.1016/j.jfma.2018.01.008_bib40
  article-title: Accuracy of upper jaw positioning with intermediate splint fabrication after virtual planning in bimaxillary orthognathic surgery
  publication-title: J Craniofac Surg
  doi: 10.1097/SCS.0b013e31829a80d9
  contributor:
    fullname: Sun
– volume: 29
  start-page: 11
  year: 2000
  ident: 10.1016/j.jfma.2018.01.008_bib1
  article-title: Computer−assisted three-dimensional surgical planning and simulation: 3D virtual osteotomy
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/S0901-5027(00)80116-2
  contributor:
    fullname: Xia
– volume: 131
  start-page: 44
  year: 2007
  ident: 10.1016/j.jfma.2018.01.008_bib2
  article-title: Three−dimensional cone-beam computed tomography for assessment of mandibular changes after orthognathic surgery
  publication-title: Am J Orthod Dentofac Orthop
  doi: 10.1016/j.ajodo.2005.03.029
  contributor:
    fullname: Cevidanes
– volume: 52
  start-page: 251
  year: 2014
  ident: 10.1016/j.jfma.2018.01.008_bib8
  article-title: Computer−assisted orthognathic surgery for correction of facial asymmetry: results of a randomised controlled clinical
  publication-title: Br J Oral Maxillofac Surg
  doi: 10.1016/j.bjoms.2013.12.010
  contributor:
    fullname: De Riu
– volume: 44
  start-page: 329
  issue: 3
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib9
  article-title: Computer−aided planning in orthognathic surgery-systematic review
  publication-title: Int J Oral Maxillofac Surg
  doi: 10.1016/j.ijom.2014.10.025
  contributor:
    fullname: Haas
– volume: 25
  start-page: 11
  year: 2015
  ident: 10.1016/j.jfma.2018.01.008_bib56
  article-title: Accuracy evaluation of CAD/CAM generated splints in orthognathic surgery: a cadaveric study
  publication-title: Head Face Med
  contributor:
    fullname: Schouman
– volume: 49
  start-page: 203
  year: 2016
  ident: 10.1016/j.jfma.2018.01.008_bib39
  article-title: Improvement in cranioplasty: advanced prosthesis biomanufacturing
  publication-title: Procedia CIRP
  doi: 10.1016/j.procir.2015.11.017
  contributor:
    fullname: Jardini
– volume: 110
  start-page: e1
  year: 2010
  ident: 10.1016/j.jfma.2018.01.008_bib79
  article-title: CAD/CAM surface templates as an alternative to the intermediate wafer in orthognathic surgery
  publication-title: Oral Surg Oral Med Oral Pathol Oral Radiol Endod
  doi: 10.1016/j.tripleo.2010.05.052
  contributor:
    fullname: Bai
SSID ssj0046996
Score 2.536269
SecondaryResourceType review_article
Snippet With the recent advances in three-dimensional (3D) imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of...
SourceID doaj
proquest
crossref
pubmed
elsevier
SourceType Open Website
Aggregation Database
Index Database
Publisher
StartPage 547
SubjectTerms 3D printing
Additive manufacturing
Computer-aided design
Computer-aided manufacturing
Orthognathic surgery
Rapid prototyping
SummonAdditionalLinks – databaseName: ScienceDirect Freedom Collection 2013
  dbid: .~1
  link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LSwMxEA7Fg3gR39YXEbzJ2uwm2QeearUUQS9a8BbyWlmRban16tmzP9Ff4sw-ih704DEhbMKXbOabZOYLISeJ82DWrQ4izxJwUDgLsoT7IAe2oSXPvTWYO3xzG4_G4vpBPnTIoM2FwbDKZu-v9_Rqt25qeg2avWlR9O4YWPY4FmCCwSUPOSb8CjB_sKbP3hZhHuD9VW90YeMAWzeJM3WM11NeaQ-FaSXdiU9MfjNOlYb_Dxv1GwetbNFwjaw2JJL263Guk44vN8jyTXNNvknO-SXFAzsMaaZFSfFuZvKIx-SFpS91IjT9fP-gffq8kFWmdRbLFhkPr-4Ho6B5JSGwkkfzAPhFnlgRZlAEbgaUwCVJyox0WkjDeOJTm8FM6CgyQmKmlbbWonSUM0CuPN8mS-Wk9LuE8kzoDOx75BIu0BUCZ8nJHDyK1MWhY11y2sKjprUYhmqjxJ4UgqkQTMVCBWB2yQUiuGiJQtZVxWT2qJqZVMxlRhubGq21APKlvdZGslAL7lmU6y6RLf7qx7qATxV_dn7cTpaCHwZvQXTpJ68vCsWQOfAyFnfJTj2LiyEC98lSgGbvn73ukxUs1eG8B2RpPnv1h0Ba5uaoWpVfmTXnQg
  priority: 102
  providerName: Elsevier
Title 3D printing in orthognathic surgery − A literature review
URI https://dx.doi.org/10.1016/j.jfma.2018.01.008
https://www.ncbi.nlm.nih.gov/pubmed/29398097
https://search.proquest.com/docview/1994363906
https://doaj.org/article/0d9babc8baaa4600aeaab501a43e02fa
Volume 117
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV1LS8QwEA7qQbyIb9cXEbxJNW2StsGTr2UR9KTgLeRVWZGu6Hr17Nmf6C9xpmkXPagXjy2lHb5pO98kM98Qslf4AGHdmSQLrIAEhbNEFTwkFbANI3kVnMXe4curfHAjLm7l7ZdRX1gTFuWBI3CHzCtrrCutMUZAdDbBGCtZagQPLKsiNWKqS6biPxhyvmYyF1NY3JGLvG2XiZVd91WjOJSWjWAnDpb8EpIa5f5vkekn5tlEoP4CmW-pIz2OJi-SqVAvkdnLdnN8mRzxM4rLdFjITIc1xR2Z0R0ujg8dfY7tz_Tj7Z0e04eJmDKNvSsr5KZ_fn06SNrZCImTPBsnwCqqwolUwSEwMiACvihKZqU3QlrGi1A6BfibLLNCYn-Vcc6hYJS3QKkCXyUz9agO64RyJYyCqJ75ggtMgCBF8rKCPKL0eepZj-x38OjHKIGhu9qwe41gagRTs1QDmD1ygghOrkT56uYEOFW3TtV_ObVHZIe_bplAjPBwq-GvD9_tnKXhM8G9D1OH0cuzRglkDmyM5T2yFr04MREYjyoBmo3_MH2TzKFBsaJ3i8yMn17CNvCWsd0h0wev6U7zon4C5vzp3w
link.rule.ids 315,783,787,867,2109,4509,27936,27937,45597
linkProvider Directory of Open Access Journals
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LT9wwEB4BlaAX1FKgS1-u1BsK68R2HuqJ0qItZbkAEjfLr6yCUBbtLlfOnPsT-0s6k8eqHODQYxwrtj47nm_smc8AXzIf0Kw7EyWBZ-igCB4VmQhRiWzDKFEGZyl3eHyWji7lyZW6WoGjPheGwiq7tb9d05vVuisZdmgOb6tqeM7RsqepRBOMLnks8lV4IYkf46Q-uF_GeaD711zSRbUjqt5lzrRBXtdlIz4U5412J90x-Y91akT8Hxmpp0hoY4yOX8FmxyLZYdvR17AS6i1YH3fn5G_gq_jOaMeOYppZVTM6nJlOaJ-8cmzeZkKzPw-_2SG7WeoqszaNZRsuj39cHI2i7pqEyCmRLCIkGGXmZFzgI5Iz5AQ-y3JulTdSWS6ykLsCh8IkiZWKUq2Mc460o7xFdhXEDqzV0zq8BSYKaQo08InPhCRfCL0lr0p0KXKfxp4PYL-HR9-2ahi6DxO71gSmJjA1jzWCOYBvhOCyJilZNwXT2UR3Q6m5L6yxLrfGGInsywRjrOKxkSLwpDQDUD3--tHEwE9Vzzb-uR8sjX8MHYOYOkzv5prUkAUSM54OYLcdxWUXkfwUOUKz95-tfoKN0cX4VJ_-PPv1Dl7Smza29z2sLWZ34QMymIX92MzQv1gm6mk
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=3D+printing+in+orthognathic+surgery+%E2%88%92+A+literature+review&rft.jtitle=Journal+of+the+Formosan+Medical+Association&rft.au=Hsiu-Hsia+Lin&rft.au=Daniel+Lonic&rft.au=Lun-Jou+Lo&rft.date=2018-07-01&rft.pub=Elsevier&rft.issn=0929-6646&rft.volume=117&rft.issue=7&rft.spage=547&rft.epage=558&rft_id=info:doi/10.1016%2Fj.jfma.2018.01.008&rft.externalDBID=DOA&rft.externalDocID=oai_doaj_org_article_0d9babc8baaa4600aeaab501a43e02fa
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0929-6646&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0929-6646&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0929-6646&client=summon