Pore Filling Effect of Forced Carbonation Reactions Using Carbon Dioxide Nanobubbles

• Published in: Materials Vol. 13; no. 19; p. 4343
• Main Authors: Kim, Jihoon, Kitagaki, Ryoma, Choi, Heesup
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 29.09.2020; MDPI
• Subjects: Aqueous solutions; CaCO3; Calcium carbonate; Carbon dioxide; Carbonation; Cement; cementitious materials; Concrete; Concrete construction; Concrete structures; Densification; Durability; forced carbonation; Hydration; Mortars (material); nanosized ultrafine CO2 bubble; Porous materials; surface modification; Water-cement ratio; Japan
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma13194343

Various methods for repairing and modifying concrete surfaces have been proposed and applied to improve the durability of existing concrete structures. Surface modification through forced carbonation is a method of densification that forms calcium carbonate in the pores on the surface of concrete to improve its durability. In this study, to evaluate the applicability of this surface modification method to existing buildings, a series of experiments was conducted in which mortar specimens were repeatedly immersed in a carbon dioxide nanobubble aqueous solution. By evaluating the weight change and absorption rate, it was determined that the higher the water/cement ratio of the mortar specimen, the higher the pore filling effect owing to immersion in the carbon dioxide nanobubble aqueous solution. In addition, the effect of clogged pores generated by the precipitation of calcium carbonate was confirmed, and it was found that the higher the water/cement ratio of the mortar specimen, the higher the pore filling effect due to clogging. We believe that our findings contribute to the development of research and construction practices associated with concrete repair and restoration.