Gas- and solid/liquid-phase reactions during pyrolysis of softwood and hardwood lignins

► Lignin pyrolysis proceeds in the gas and solid/liquid phases in heating at 600 °C. ► The gas- and solid/liquid-phase reactions are explainable with the temperature-dependent reactions, that is, devolatilization (200–400 °C), methoxyl group-related reactions (>450 °C) and intermediates gasificat...

Full description

Saved in:
Bibliographic Details
Published inJournal of analytical and applied pyrolysis Vol. 92; no. 2; pp. 417 - 425
Main Authors Asmadi, Mohd, Kawamoto, Haruo, Saka, Shiro
Format Journal Article
LanguageEnglish
Published Elsevier B.V 01.11.2011
Subjects
Online AccessGet full text

Cover

Loading…
More Information
Summary:► Lignin pyrolysis proceeds in the gas and solid/liquid phases in heating at 600 °C. ► The gas- and solid/liquid-phase reactions are explainable with the temperature-dependent reactions, that is, devolatilization (200–400 °C), methoxyl group-related reactions (>450 °C) and intermediates gasification (>550–600 °C). ► The O–CH 3 bond homolysis and rearrangement occurring at >450 °C give catechols/pyrogllols and cresols/xylenols, respectively, in the gas phase. ► The solid/liquid-phase reactions give significant amounts of noncondensable gases, while reduces the formation of tar, particularly catechols/pyrogallols and PAHs. ► Hardwood lignin forms more volatile products at a lower temperature than softwood lignin. Pyrolytic reactions of Japanese cedar ( Cryptomeria japonica, a softwood) and Japanese beech ( Fagus crenata, a hardwood) milled wood lignins (MWLs) were studied with thermogravimetry (TG) and by pyrolysis in a closed ampoule reactor (N 2/600 °C). The data were compared with those of guaiacol/syringol as simple lignin model aromatic nuclei. Several DTG peaks were observed around 300–350, 450, 590 and 650 °C. The first DTG peak temperature (326 °C) of beech was lower than that (353 °C) of cedar. This indicates that the volatile formation from cedar MWL is slightly delayed in heating at 600 °C. The gas-phase reactions via GC/MS-detectable low MW products were explainable with the temperature-dependent reactions observed for guaiacol/syringol in our previous paper. The methoxyl groups became reactive at ∼450 °C, giving O–CH 3 homolysis products (catechols/pyrogallols) and OCH 3 rearrangement products (cresols/xylenols). The former homolysis products were effectively converted into gaseous products (mainly CO) at >550–600 °C. However, the GC/MS-detectable tar yields, especially syringyl unit-characteristic products, were much lower than those from guaiacol/syringol. Thus, contributions of higher MW intermediates and solid/liquid-phase reactions are more important in lignin pyrolysis. From the results of stepwise pyrolysis of char + coke fractions at 450 and 600 °C, the methoxyl group-related reactions (450 °C) and intermediates gasification (600 °C) were suggested to occur also in the solid/liquid phase. This was consistent with the DTG peaks observed around these temperatures. These solid/liquid-phase reactions reduced the tar formation, especially catechols/pyrogallols and PAHs. Different features observed between these two MWLs are also focused.
Bibliography:http://dx.doi.org/10.1016/j.jaap.2011.08.003
ISSN:0165-2370
1873-250X
DOI:10.1016/j.jaap.2011.08.003