Critical review on advancements on the fiber-reinforced composites: Role of fiber/matrix modification on the performance of the fibrous composites

Nowadays, Fiber-reinforced Polymer Composites (FRPCs) are extensively utilized due to their remarkable properties such as high stiffness, excellent strength to weight ratio, resistance to wear, corrosion etc. Earlier, the FRPCs are prepared through synthetic fibers in order to attain high strength i...

Full description

Saved in:
Bibliographic Details
Published inJournal of materials research and technology Vol. 26; pp. 2975 - 3002
Main Authors Sharma, Harsh, Kumar, Ajay, Rana, Sravendra, Sahoo, Nanda Gopal, Jamil, Muhammad, Kumar, Rajeev, Sharma, Shubham, Li, Changhe, Kumar, Abhinav, Eldin, Sayed M., Abbas, Mohamed
Format Journal Article
LanguageEnglish
Published Elsevier B.V 01.09.2023
Elsevier
Subjects
Applications
Chemical treatment
Fiber-matrix interfaces
FRPCs
Mechanical properties
Nanoparticles
Nanoparticles
Mechanical properties
FRPCs
Applications
Chemical treatment
Fiber-matrix interfaces
Online AccessGet full text
ISSN2238-7854
DOI10.1016/j.jmrt.2023.08.036

Cover

Abstract Nowadays, Fiber-reinforced Polymer Composites (FRPCs) are extensively utilized due to their remarkable properties such as high stiffness, excellent strength to weight ratio, resistance to wear, corrosion etc. Earlier, the FRPCs are prepared through synthetic fibers in order to attain high strength in conjunction with high elastic modulus. However, with the increasing economic and environmental factors regarding the accumulation of plastic waste, the development of natural and hybrid (combination of any two) fibers were started. The mechanical properties of FRPCs are largely determined by the way loads are transferred between the matrix and fibers, or by the strength of the bond between the fiber-matrix interfaces. Additionally, these factors play a significant role in determining the overall performance of FRPCs. Therefore, this review discusses the recent advancements in enhancing the interaction between fiber and matrix by means of chemical treatment and the inclusion of nanoparticles. The resulting mechanical performance of the end composites and their intended applications are also presented. Few targeted application areas of FRPCs such as aerospace, automobile, mechanical and biomedical implants were discussed in detail.
AbstractList Nowadays, Fiber-reinforced Polymer Composites (FRPCs) are extensively utilized due to their remarkable properties such as high stiffness, excellent strength to weight ratio, resistance to wear, corrosion etc. Earlier, the FRPCs are prepared through synthetic fibers in order to attain high strength in conjunction with high elastic modulus. However, with the increasing economic and environmental factors regarding the accumulation of plastic waste, the development of natural and hybrid (combination of any two) fibers were started. The mechanical properties of FRPCs are largely determined by the way loads are transferred between the matrix and fibers, or by the strength of the bond between the fiber-matrix interfaces. Additionally, these factors play a significant role in determining the overall performance of FRPCs. Therefore, this review discusses the recent advancements in enhancing the interaction between fiber and matrix by means of chemical treatment and the inclusion of nanoparticles. The resulting mechanical performance of the end composites and their intended applications are also presented. Few targeted application areas of FRPCs such as aerospace, automobile, mechanical and biomedical implants were discussed in detail.
Author Li, Changhe
Kumar, Rajeev
Sharma, Shubham
Abbas, Mohamed
Kumar, Abhinav
Sharma, Harsh
Jamil, Muhammad
Eldin, Sayed M.
Rana, Sravendra
Sahoo, Nanda Gopal
Kumar, Ajay
Author_xml – sequence: 1
  givenname: Harsh
  surname: Sharma
  fullname: Sharma, Harsh
  organization: University of Petroleum and Energy Studies (UPES), School of Engineering, Energy Acres, Bidholi, Dehradun, Uttarakhand, 248007, India
– sequence: 2
  givenname: Ajay
  surname: Kumar
  fullname: Kumar, Ajay
  organization: University of Petroleum and Energy Studies (UPES), School of Engineering, Energy Acres, Bidholi, Dehradun, Uttarakhand, 248007, India
– sequence: 3
  givenname: Sravendra
  surname: Rana
  fullname: Rana, Sravendra
  organization: University of Petroleum and Energy Studies (UPES), School of Engineering, Energy Acres, Bidholi, Dehradun, Uttarakhand, 248007, India
– sequence: 4
  givenname: Nanda Gopal
  surname: Sahoo
  fullname: Sahoo, Nanda Gopal
  organization: Prof. Rajendra Singh Nanoscience and Nanotechnology Centre, Department of Chemistry, D.S.B. Campus, Kumaun University, Nainital, 263001, Uttarakhand, India
– sequence: 5
  givenname: Muhammad
  surname: Jamil
  fullname: Jamil, Muhammad
  email: mjamil@konkuk.ac.kr
  organization: Department of Physics, Konkuk University, Seoul, South Korea
– sequence: 6
  givenname: Rajeev
  surname: Kumar
  fullname: Kumar, Rajeev
  email: rajeev.14584@lpu.co.in
  organization: School of Mechanical Engineering, Lovely Professional University, Phagwara, 144411, Punjab, India
– sequence: 7
  givenname: Shubham
  surname: Sharma
  fullname: Sharma, Shubham
  email: shubham543sharma@gmail.com, shubhamsharmacsirclri@gmail.com
  organization: Mechanical Engineering Department, University Center for Research & Development, Chandigarh University, Mohali, Punjab, 140413, India
– sequence: 8
  givenname: Changhe
  surname: Li
  fullname: Li, Changhe
  email: sy_lichanghe@163.com
  organization: School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520, Qingdao, China
– sequence: 9
  givenname: Abhinav
  surname: Kumar
  fullname: Kumar, Abhinav
  email: drabhinav@ieee.org
  organization: Department of Nuclear and Renewable Energy, Ural Federal University Named After the First President of Russia, Boris Yeltsin, 19 Mira Street, 62000, Ekaterinburg, Russia
– sequence: 10
  givenname: Sayed M.
  surname: Eldin
  fullname: Eldin, Sayed M.
  email: elsayed.tageldin@fue.edu.eg
  organization: Center of Research, Faculty of Engineering, Future University in Egypt, New Cairo, 11835, Egypt
– sequence: 11
  givenname: Mohamed
  surname: Abbas
  fullname: Abbas, Mohamed
  email: mabas@kku.edu.sa
  organization: Electrical Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia
BookMark eNp9kc1q3DAUhb1IoWmaF-jKL2BHf5al0E0Z2iYQKJR2LTTSVSNjW8OVmrav0SeOnJlC6CJoISTO-bj3nDfN2ZpWaJp3lPSUUHk19dOCpWeE8Z6onnB51pwzxlU3qkG8bi5zngghdNCSKHre_N1hLNHZuUV4iPCrTWtr_YNdHSywlry9yz20Ie4BO4S4hoQOfOvSckg5FsjX7dc0Q5vCUXS12ILxd7skH0Mll1gRJ8oBsNqXjb7pT2BMP_Mz3tvmVbBzhsvTfdF8__Tx2-6mu_vy-Xb34a5zYpSlk4JYDkpoytzgvSLCAdfc25EObC-5FWHkLnjwmmlNhRzloHTVaebkfhj4RXN75PpkJ3PAuFj8Y5KN5ukj4Q9jsWYzgxHARqu0sqMGIULQ9ZDRgWQDp8LaylJHlsOUM0IwLpan1QvaOBtKzFaPmcxWj9nqMUSZWk-1sv-s_0Z50fT-aIIaUO0NTXYRaqw-IrhSN4gv2R8BPliwrg
CitedBy_id crossref_primary_10_1515_zna_2024_0131
crossref_primary_10_1177_15589250241240073
crossref_primary_10_1177_15589250241293883
crossref_primary_10_1016_j_coco_2024_101859
crossref_primary_10_1016_j_mtcomm_2024_111278
crossref_primary_10_1021_acsbiomaterials_4c01600
crossref_primary_10_1016_j_ijsolstr_2025_113286
crossref_primary_10_1177_07316844241295848
crossref_primary_10_1007_s12221_024_00621_5
crossref_primary_10_1016_j_ndteint_2024_103238
crossref_primary_10_1016_j_coco_2024_102102
crossref_primary_10_1016_j_nxmate_2025_100565
crossref_primary_10_5937_fme2403461H
crossref_primary_10_1016_j_hybadv_2025_100444
crossref_primary_10_1016_j_ijbiomac_2024_132492
crossref_primary_10_1016_j_jcomc_2024_100463
crossref_primary_10_1007_s13399_023_04916_0
crossref_primary_10_1002_pc_28787
crossref_primary_10_1002_pc_29710
crossref_primary_10_1007_s13399_024_05352_4
crossref_primary_10_1016_j_nanoms_2024_03_007
crossref_primary_10_1002_pc_29834
crossref_primary_10_1080_15440478_2024_2311304
crossref_primary_10_1515_epoly_2024_0100
crossref_primary_10_1016_j_heliyon_2025_e41843
crossref_primary_10_2139_ssrn_4666701
crossref_primary_10_1002_pi_6686
crossref_primary_10_1080_25740881_2024_2303608
crossref_primary_10_1016_j_cma_2024_117571
crossref_primary_10_3390_su152316171
crossref_primary_10_1016_j_measurement_2023_113627
crossref_primary_10_1016_j_conbuildmat_2024_138678
crossref_primary_10_1002_pc_29261
crossref_primary_10_3389_fmats_2023_1293254
crossref_primary_10_1016_j_cej_2025_160912
crossref_primary_10_1016_j_jmrt_2023_10_202
crossref_primary_10_1016_j_jmrt_2023_09_157
crossref_primary_10_1016_j_polymertesting_2024_108578
crossref_primary_10_1007_s10853_024_10080_1
crossref_primary_10_1177_14644207241269567
crossref_primary_10_1016_j_conbuildmat_2024_138271
crossref_primary_10_3390_polym17050694
crossref_primary_10_1002_pc_28536
crossref_primary_10_1007_s00289_024_05427_2
crossref_primary_10_1016_j_engfailanal_2024_108717
crossref_primary_10_1016_j_vacuum_2025_114253
crossref_primary_10_1177_15589250241246072
crossref_primary_10_1515_htmp_2022_0328
crossref_primary_10_1016_j_compositesb_2024_111857
crossref_primary_10_1093_oxfmat_itae009
crossref_primary_10_61186_masm_3_4_413
crossref_primary_10_1016_j_vacuum_2024_113886
crossref_primary_10_1021_acssuschemeng_4c00453
crossref_primary_10_1177_09544089241259335
crossref_primary_10_1016_j_jenvman_2025_124752
crossref_primary_10_1016_j_conbuildmat_2024_138489
crossref_primary_10_1002_pc_28523
crossref_primary_10_1177_08927057241240720
crossref_primary_10_1016_j_jmrt_2024_06_058
crossref_primary_10_1016_j_apmt_2025_102666
crossref_primary_10_1007_s10853_024_09925_6
crossref_primary_10_1016_j_saa_2025_125957
crossref_primary_10_1016_j_measurement_2025_117042
crossref_primary_10_3390_jcs8050178
crossref_primary_10_1016_j_cej_2024_158190
crossref_primary_10_3390_polym16243478
crossref_primary_10_3390_jcs8070280
crossref_primary_10_1016_j_cscm_2023_e02683
crossref_primary_10_1080_15440478_2024_2349742
crossref_primary_10_3389_fmats_2023_1236266
crossref_primary_10_1108_MMMS_07_2024_0193
crossref_primary_10_1016_j_compstruct_2024_118696
crossref_primary_10_1038_s41598_025_87912_w
crossref_primary_10_1016_j_jmrt_2023_12_144
crossref_primary_10_1016_j_tws_2024_112899
crossref_primary_10_1016_j_jmrt_2023_09_252
crossref_primary_10_3390_polym15204192
crossref_primary_10_1021_acsami_4c10253
crossref_primary_10_1016_j_ijbiomac_2025_141589
crossref_primary_10_1016_j_jmrt_2024_06_001
crossref_primary_10_1016_j_conbuildmat_2024_138055
crossref_primary_10_1016_j_mtcomm_2024_110798
crossref_primary_10_1515_rams_2023_0147
crossref_primary_10_1007_s00466_024_02521_0
crossref_primary_10_1038_s41598_024_76094_6
crossref_primary_10_3390_polym16213000
Cites_doi 10.1016/j.matlet.2004.09.011
10.1007/s40735-021-00558-9
10.1061/(ASCE)GM.1943-5622.0002529
10.1177/0040517520960749
10.1166/mex.2022.2302
10.1016/j.compositesb.2022.109639
10.1016/j.compositesa.2014.08.027
10.1016/j.vacuum.2022.111532
10.1016/j.progpolymsci.2016.12.010
10.1515/rams-2022-0322
10.1016/j.matpr.2021.02.468
10.1016/j.matpr.2020.08.613
10.1016/j.compscitech.2021.108951
10.1016/j.tws.2019.106232
10.1016/j.compositesa.2021.106760
10.1016/j.compositesb.2020.108569
10.1016/j.compstruct.2020.113045
10.1016/S0266-3538(01)00046-X
10.3390/polym11081356
10.1007/s10443-021-09888-w
10.1016/j.polymertesting.2017.04.026
10.4028/www.scientific.net/KEM.510-511.443
10.1016/j.watres.2022.119068
10.4028/www.scientific.net/AMR.502.227
10.1002/pc.25986
10.1016/j.cej.2018.04.149
10.31436/iiumej.v22i2.1747
10.1177/15589250231167401
10.1016/j.surfcoat.2014.08.054
10.1016/j.compositesa.2015.12.008
10.1002/pi.1514
10.1016/j.jmst.2022.12.027
10.1016/j.cemconcomp.2019.04.025
10.1177/0731684414530790
10.1016/j.compstruct.2021.113784
10.1016/B978-0-08-102292-4.00019-9
10.1016/B978-0-08-102292-4.00007-2
10.17485/ijst/2015/v8i30/72172
10.1016/j.matpr.2020.07.420
10.1016/j.jhydrol.2022.128541
10.1016/j.compositesb.2021.108872
10.1080/00405000.2019.1613735
10.1155/2017/8630749
10.1080/21655979.2019.1661694
10.1016/j.compscitech.2006.01.015
10.1590/S0100-40422009000300010
10.1016/j.compositesa.2018.06.024
10.3390/molecules26051228
10.37358/MP.21.2.5482
10.1177/0954406218764509
10.1021/acsanm.3c01254
10.1016/B978-0-08-102292-4.00005-9
10.3390/polym13193260
10.1016/j.repl.2017.03.005
10.1080/03602559.2015.1098694
10.1186/s40069-021-00476-7
10.1016/j.matdes.2021.109456
10.4172/2169-0316.1000234
10.1016/j.cemconcomp.2022.104926
10.1016/j.jmrt.2022.11.033
10.1016/j.matpr.2022.03.655
10.1504/IJAUTOC.2014.064129
10.1088/2631-6331/ac376e
10.3390/ma15228066
10.1016/j.jmrt.2022.07.026
10.1016/j.matpr.2020.03.108
10.1007/s10853-020-05286-y
10.1016/j.polymer.2019.121803
10.1021/acsami.7b01488
10.1177/0021998320962845
10.1016/j.jmrt.2023.05.102
10.1080/09506608.2018.1467365
10.1177/15280837221098573
10.1016/j.wear.2018.12.043
10.1016/j.ccr.2023.215118
10.3390/polym13223859
10.1007/s10853-021-06291-5
10.1016/j.compscitech.2011.08.017
10.1016/j.eng.2020.10.016
10.1590/1516-1439.044615
10.1016/j.compstruct.2017.10.068
10.3390/coatings12101559
10.1016/j.corsci.2019.108337
10.1080/14658011.2019.1585099
10.2298/CICEQ0903137K
10.1016/j.compositesb.2018.10.098
10.1016/B978-0-08-102292-4.00006-0
10.3390/ma12081226
10.1016/j.compositesa.2015.08.038
10.1016/j.compositesb.2020.108460
10.1016/j.matpr.2019.09.221
10.1016/j.jmrt.2019.09.068
10.1016/j.jmrt.2023.01.057
10.1016/j.carbpol.2011.04.043
10.1016/j.conbuildmat.2023.131569
10.1016/j.indcrop.2010.10.010
10.3390/polym13111897
10.1016/j.compscitech.2006.01.012
10.1016/j.progpolymsci.2010.03.002
10.3390/su142114522
10.1007/s13726-020-00790-z
10.1177/0892705711411339
10.1016/j.jclepro.2022.135390
10.3390/polym13122005
10.1002/adem.202000318
10.1016/j.compositesb.2011.01.010
10.1016/j.compositesb.2016.08.019
10.1177/0731684413516393
10.3390/polym14214727
10.3390/polym13101638
10.1007/978-3-031-39481-2
10.1080/22243682.2018.1534609
10.1016/j.matpr.2021.09.131
10.1063/1.5058262
10.14359/51735976
10.1016/j.matpr.2020.09.160
10.1016/j.jmrt.2020.09.035
10.1088/2631-6331/ac5730
10.1016/j.matpr.2020.03.110
10.1016/j.matpr.2019.09.106
10.3389/fmats.2019.00224
10.1016/j.dental.2015.01.003
10.3390/fib10030027
10.1097/SCS.0000000000002925
10.1080/15440478.2019.1645789
10.9790/1684-0941822
10.1016/j.cemconcomp.2018.04.007
10.1016/j.jmrt.2022.10.044
10.1016/j.compositesb.2019.05.001
10.1016/j.compscitech.2018.04.005
10.1016/j.matdes.2012.08.029
10.1007/s10853-018-3097-3
10.1016/j.jiec.2017.02.024
10.1300/J395v01n03_03
10.1016/j.jmrt.2022.11.165
10.1155/2013/325085
10.1557/mrs.2012.33
10.1109/TDEI.2023.3264964
10.1016/j.compositesa.2013.12.009
10.1016/j.jallcom.2023.168824
10.1016/j.matpr.2022.04.085
10.1080/23311916.2021.1923382
10.1016/j.rinp.2019.102634
10.1016/j.matpr.2020.02.230
10.1016/j.compstruct.2022.116308
10.1166/mex.2019.1544
10.1038/ncomms15611
10.3390/ma15072618
10.3390/fib6030059
10.1016/j.polymer.2018.04.028
10.1016/j.sajce.2017.04.005
10.1016/j.jde.2016.09.026
10.1016/j.jallcom.2012.11.048
10.1016/j.jmrt.2023.01.006
10.1016/j.conbuildmat.2014.11.043
10.1016/j.matpr.2018.10.120
10.1016/j.compscitech.2019.02.025
10.1016/j.compstruct.2018.03.004
10.1007/s10443-019-09772-8
10.3390/polym12040902
10.1080/15440478.2018.1477083
10.1016/j.jmrt.2013.02.003
10.1016/j.jcomc.2022.100298
10.1016/j.compstruct.2018.08.091
10.1080/15685543.2013.796753
ContentType Journal Article
Copyright 2023 The Authors
Copyright_xml – notice: 2023 The Authors
DBID 6I.
AAFTH
AAYXX
CITATION
DOA
DOI 10.1016/j.jmrt.2023.08.036
DatabaseName ScienceDirect Open Access Titles
Elsevier:ScienceDirect:Open Access
CrossRef
DOAJ Directory of Open Access Journals
DatabaseTitle CrossRef
DatabaseTitleList

Database_xml – sequence: 1
  dbid: DOA
  name: DOAJ Directory of Open Access Journals
  url: https://www.doaj.org/
  sourceTypes: Open Website
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EndPage 3002
ExternalDocumentID oai_doaj_org_article_4e27a898a79e44ff9f9f07ce625314aa
10_1016_j_jmrt_2023_08_036
S2238785423018483
GroupedDBID 0R~
0SF
4.4
457
5VS
6I.
AACTN
AAEDT
AAEDW
AAFTH
AAIKJ
AALRI
AAXUO
ABMAC
ABMYL
ABXRA
ACGFS
ADBBV
ADCUG
ADEZE
AEXQZ
AFTJW
AGHFR
AITUG
ALMA_UNASSIGNED_HOLDINGS
AMRAJ
BCNDV
EBS
EJD
FDB
FNPLU
GROUPED_DOAJ
GX1
HH5
HZ~
IPNFZ
IXB
KQ8
M41
NCXOZ
O9-
OK1
RIG
ROL
SSZ
AAYWO
AAYXX
ADVLN
AFJKZ
CITATION
ID FETCH-LOGICAL-c476t-640a3e84912c5dd804ce393da7152b63a4f73cfded929914676589d8092c6b553
IEDL.DBID DOA
ISSN 2238-7854
IngestDate Wed Aug 27 01:29:47 EDT 2025
Thu Apr 24 23:03:59 EDT 2025
Tue Jul 01 03:51:52 EDT 2025
Sat Mar 23 16:40:57 EDT 2024
IsDoiOpenAccess true
IsOpenAccess true
IsPeerReviewed true
IsScholarly true
Keywords Nanoparticles
Mechanical properties
FRPCs
Applications
Chemical treatment
Fiber-matrix interfaces
Language English
License This is an open access article under the CC BY license.
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c476t-640a3e84912c5dd804ce393da7152b63a4f73cfded929914676589d8092c6b553
OpenAccessLink https://doaj.org/article/4e27a898a79e44ff9f9f07ce625314aa
PageCount 28
ParticipantIDs doaj_primary_oai_doaj_org_article_4e27a898a79e44ff9f9f07ce625314aa
crossref_citationtrail_10_1016_j_jmrt_2023_08_036
crossref_primary_10_1016_j_jmrt_2023_08_036
elsevier_sciencedirect_doi_10_1016_j_jmrt_2023_08_036
ProviderPackageCode CITATION
AAYXX
PublicationCentury 2000
PublicationDate September-October 2023
2023-09-00
2023-09-01
PublicationDateYYYYMMDD 2023-09-01
PublicationDate_xml – month: 09
  year: 2023
  text: September-October 2023
PublicationDecade 2020
PublicationTitle Journal of materials research and technology
PublicationYear 2023
Publisher Elsevier B.V
Elsevier
Publisher_xml – name: Elsevier B.V
– name: Elsevier
References Wang, Hazell, Shankar, Morozov (bib60) 2017; 61
Patterson, Malakooti, Lin, Okorom, Sodano (bib69) 2018; 161
Zhou, Li, Fan, Shen (bib50) 2018; 143
Song X, Wang P. The characterization of mechanical properties of jute/PLA composites with modified nano sio2 by coupling agent n.d.:1–18.
Abdullah, Iannucci, Greenhalgh (bib65) 2018; 202
Jha, Tamrakar, Kumar, Sharma, Singh, Ilyas (bib151) 2022; 51
Shi SQ. TENSILE properties of four types of individual cellulosic fibers jinwu wang shuangping cao haitao cheng. Wood Fiber Sci n.d.;43:353–364.
Belingardi, Koricho (bib141) 2014; 1
Hanan, Jawaid, Md Tahir (bib107) 2020; 17
Sharma, Kumar, Kumar, Gulati (bib155) 2018; 5
Swolfs, Verpoest, Gorbatikh (bib104) 2019; 64
Kumar Rout, Kar, Kumar Jesthi, Kumar Sutar (bib123) 2016; 11
Sun, Chen, Sun, Wu, Guo, Dong (bib188) 2023; 387
Park, Park (bib51) 2018; 184
Yang, Han, Gu (bib38) 2021; 200
Scaffaro, Maio, Lopresti (bib7) 2018; 112
Cheng, Zhang, Jiang, Dai, Meng, Luo (bib47) 2018; 347
Singh, Gangil, Ranakoti, Joshi (bib14) 2021; 42
Alberto (bib131) 2013
Wang, Tong, Zhu, Liang, Zhang (bib44) 2020; 22
.
Nagaraja, Rajanna, Prakash, Rajeshkumar (bib46) 2021; 34
Karthik, Jafrey Daniel James, Vijayan, Ahmad, Rajkumar, Sharma (bib194) 2023
Oushabi, Sair, Oudrhiri Hassani, Abboud, Tanane, El Bouari (bib130) 2017; 23
Alves Fidelis, Pereira, Gomes, De Andrade Silva, Toledo Filho (bib12) 2013; 2
Jha, Tyagi, Kumar, Sharma, Huzaifah, Li (bib152) 2021; 13
Ashworth, Rongong, Wilson, Meredith (bib139) 2016; 105
Ku, Wang, Pattarachaiyakoop, Trada (bib53) 2011; 42
Bouwmeester, Marissen, Bergsma (bib85) 2008; 1
Lazar, Rotaru, Bâldea, Boşca, Berce, Prejmerean (bib149) 2016; 27
Bhuvaneswari, Devarajan, Arulmurugan, Mahendran, Rajkumar, Sharma (bib190) 2022; 14
Swolfs, Gorbatikh, Verpoest (bib103) 2014; 67
Yang, Jiang, Tian, Hou, Zhao (bib176) 2023; 22
Ding, Zhang, Kong, Qiao, Hu, Zhang (bib55) 2019; 9
Zhao (bib175) 2022; 21
Banerjee, Sen, Ghosh, Biswas, Sharma, Kumar (bib199) 2023
Pullen, Louca, Micallef, Soleiman Fallah, Curtis (bib59) 2015; 28
Yang, Wu, Zhou, Cai, Wu, Tian (bib186) 2022; 154
Landesmann, Seruti, Batista (bib42) 2015; 18
Prasad, Saini, Kumar (bib109) 2021; 18
Komorek, Szczepaniak, Przybylek, Krzyzak, Godzimirski, Roskowicz (bib111) 2021; 256
Peng, Xu, Dai, Sun, Feng, Huang (bib159) 2022; 22
Manral, Kumar Bajpai (bib87) 2021; 34
Nair, Joseph (bib21) 2014
Prakash Dwivedi, Sharma, Sunil, Gupta, Saxena, Eldin (bib193) 2023
Panthapulakkal, Raghunanan, Sain, Kc, Tjong (bib20) 2017
Costa, Nascimento, Almeida Bezerra, de Oliveira Aguiar, Pereira, Monteiro (bib100) 2021; 13
Arockiam, Jawaid, Saba (bib144) 2018
Holmes (bib133) 2017; 61
Zhang, Wang, Reimus, Ma, Soltanian, Xing (bib163) 2022; 224
Tao Shi, Y. L. Z. H. Deformation performance and fracture toughness of carbon nanofiber modified cement-based materials. ACI Mater J, 119(5). doi: 10.14359/51735976.
Zou, Qin, Tian, Huang, Zhao (bib146) 2019; 48
Vasudevan, Kumaran, Naresh, Velmurugan, Kumaran, Naresh (bib113) 2018; 0
Li, Guo, Chen, Li, Hou, Zhao (bib171) 2022; 21
Kumar, Jha, Sharma, Kumar, Li, Tag Eldin (bib191) 2022
Ismail, Paras Utami, Arid Irfai, Jamari, Bayuseno (bib41) 2021; 8
Lancaster (bib1) 1980
Heimbs, Wagner, Viana, Hoenisch, Franke (bib61) 2019; 233
Naito, Tanaka, Yang, Kagawa (bib82) 2009
Wang, Li, Xie, Fan, Zhang, Li (bib174) 2023; 23
Wang, Marashizadeh, Weng, Larson, Altan, Liu (bib5) 2022; 15
Sahoo, Rana, Cho, Li, Chan (bib39) 2010; 35
Costa, Nascimento, Garcia, Bezerra, Fabio da Costa, Luz (bib99) 2020; 9
Puttegowda, Rangappa, Jawaid, Shivanna, Basavegowda, Saba (bib22) 2018
Li, Wang, Zhang, Hu, Yu, Wang (bib56) 2021; 55
Nasser, Lin, Steinke, Sodano (bib54) 2019; 174
Zhang, Ma, Dai, Wang, Chen, Ling (bib161) 2022; 424
Manaia, Manaia (bib93) 2021; 13
Nourbakhsh, Baghlani, Ashori (bib78) 2011; 33
Lebreton, van der Zwet, Damsteeg, Slat, Andrady, Reisser (bib6) 2017; 8
Shahzad (bib31) 2013; 2013
Kumar, Srivastava (bib28) 2017; 6
Kojovic, Zivkovic (bib84) 2009; 15
Qu, Wu, Huang, Li, Li, Ma (bib37) 2021; 210
Pegoretti, Fabbri, Migliaresi, Pilati (bib16) 2004; 53
Harikumar, Devaraju (bib98) 2021; 39
Shao, Chen, Xie, Mi (bib187) 2023; 486
Chukov, Nematulloev, Torokhov, Stepashkin, Sherif, Tcherdyntsev (bib74) 2019; 15
Chandel, Tyagi, Jha, Kumar, Sharma, Singh (bib154) 2021; 3
Pi, Xiao, Du, Liu, Li (bib126) 2019; 103
Rong, Zhang, Liu, Yang, Zeng (bib124) 2001; 61
Mishra, Mandal, Rout, Sahoo (bib15) 2022; 9
Vallittu, Närhi, Hupa (bib148) 2015; 31
Hussain, Khan, Hussain (bib52) 2012; 510–511
Wang, Dadi Bekele, Qiu, Dai, Zhu, Sarsaiya (bib122) 2019; 10
Costa, Nascimento, Garcia, Monteiro, Luz, Pinheiro (bib101) 2019; 11
Patel, Sharma, Pansuriya, Malgani, Sevkani (bib106) 2018; 1953
Ramesh, Bhoopathi, Deepa, Sasikala (bib108) 2018; 6
Gao, Fan, Zeng, Chen, Xu, Nie (bib45) 2021; 91
Demircan, Kisa, Ozen, Aktas (bib57) 2020; 29
Ismail, Mohd Radzuan, Sulong, Muhamad, Che Haron (bib95) 2021; 13
Bai, Wang, Yan, Cheng, Cheng, Shi (bib97) 2021; 213
Khare, Dahiya, Gangil, Ranakoti (bib110) 2021; 38
Chandra Shekar, Singaravel, Deva Prasad, Venkateshwarlu, Srikanth (bib112) 2021; 41
Yeswanth, Jha, Bhowmik, Kumar, Sharma, Ilyas (bib153) 2022; 4
Abdullah, Iannucci, Greenhalgh, Ahmad (bib67) 2021; 28
Turla, Kumar, Reddy, Shekar (bib114) 2014; 3
Rahman, Zhafer Firdaus Syed Putra (bib23) 2019
Qureshi (bib4) 2022; 10
Silva, Haraguchi, Muniz, Rubira (bib81) 2009; 32
Scholz, Blanchfield, Bloom, Coburn, Elkington, Fuller (bib147) 2011; 71
Luo, Zhang, Zou, Liang, Chen (bib71) 2017; 51
Zhang, Khorshidi, Najafi, Ghasemi (bib180) 2023; 384
Wang, Zhang, Wan, Li, Zhao (bib43) 2019; 181
Dai, Ma, Zhang, Chen, Ershadnia, Luan (bib162) 2022; 614
Shi, Liu, Zhao, Wang, Zhao, Corr (bib166) 2022; 61
Zhang, Kang, Liu, Lin, Huang (bib181) 2023; 71
Mn, Ti, Kumar, Prakash, Choi, Koo (bib102) 2010; 4
Chen, Zhao, Jing, Hou (bib172) 2023; 940
Chawla (bib158) 2013; 9
Guo, Gou, Lv, Shan (bib184) 2022; 12
Zheng, Zhang, Li, Zhu, Wang, Song (bib2) 2022; 233
Amiri, Krosbakken, Schoen, Theisen, Ulven (bib138) 2018; 232
Solazzi, Buffoli (bib134) 2019; 26
Sathishkumar, Satheeshkumar, Naveen (bib83) 2014; 33
Liew, Hamdan, Rahman, Rusop (bib30) 2017; 2017
Du, Xiao, Liu (bib127) 2023; 72
Zhou, Lu, Zhu, Li (bib177) 2021; 7
Paulraj, Balakrishnan, Rajendran, Alagappan (bib29) 2021; 58
Manjunath, Kumar, Kumar (bib137) 2021; 7
Forintos, Czigany (bib135) 2019; 162
Duflou, Deng, Van Acker, Dewulf (bib3) 2012; 37
Mao, Greenwood, Ramakrishnan, Goodship, Shrouti, Chetwynd (bib132) 2019; 426–427
Ghalia, Abdelrasoul (bib25) 2019
Singh, Singla, Kumar (bib136) 2014; 14
Li, Liu, Wang, Zhao (bib168) 2023; 303
Saravanan, Sathish, Vijayan, Rajkumar, Sharma, Li (bib197) 2022
Alam, Alriyami, Jumaat, Muda (bib120) 2015; 8
Dong, Zhang, Yuan (bib160) 2023; 6
Kobayashi, Takada, Nakamura (bib121) 2014; 59
Das, Singha, Chaudhuri, Ganguly (bib86) 2019; 110
Cheon, Kim (bib68) 2021; 217
Jawaid, Abdul Khalil (bib79) 2011; 86
Wang, Cai (bib119) 2019; 54
Barile, Casavola, Cillis (bib34) 2018
Zhang, Liu, Yue, Wang, Zhai (bib165) 2022; 206
Wang, Memon, Hassan E, Miah, Ali (bib88) 2019; 12
Rajak, Pagar, Kumar, Pruncu (bib24) 2019; 8
Karbalaie, Yazdanirad, Mirhabibi (bib58) 2012; 25
Fu, Yang, Shan, Li, Zhu, Ma (bib185) 2020; 164
Kumar, Singh, Sharma, Li, Królczyk, Wojciechowski (bib150) 2022; 20
Lu, Xiao, Liu, Li, Li, Sun (bib125) 2018; 91
Jia, Fiedler (bib91) 2018; 6
Sherif, Chukov, Tcherdyntsev, Torokhov, Zherebtsov (bib75) 2020; 12
Chukov, Stepashkin, Gorshenkov, Tcherdyntsev, Kaloshkin (bib77) 2014; 586
Morino, Kajiyama, Nishitani (bib94) 2021; 26
Sharma, Kumar Tiwari, Singh Chauhan, Kumar, Gulati (bib156) 2021; 46
Nie, Xu, Tang, Dang, Yang, Zeng (bib116) 2021; 56
Wagh, Pagar (bib142) 2018; 2018
Karthik, Ramesh, Kolappan, Arunkumar, Udayaprakash, Rameshkumar (bib105) 2022; 62
Raja, Mohanavel, Sathish, Djearamane, Velmurugan, Karthick (bib17) 2021; 13
Dangsheng (bib76) 2005; 59
Ansell, Mwaikambo (bib80) 2009; 2
Du, Xiao, Liu, Wang (bib128) 2023; 137
Xu, Yuan, Ji, Yu, Wang, Huo (bib179) 2022; 12
Huang, Yuan, Zhang, Zhu (bib182) 2021; 15
Prince, Gopinath, Thanu, Surya Raj, Pravin Kumar (bib9) 2022; 62
Maryanka, Meidar, Curless (bib145) 2014
Yang, Qin, Yu, Zhou, Deng, Tian (bib170) 2022; 21
Liu, Zhang, Feng, Liu, Chen, Liang (bib8) 2021; 56
Begum, Fawzia, Hashmi (bib27) 2020; 6
Yusuff, Sarifuddin, Mohamad Badari, Mohd Ali (bib96) 2021; 22
Gupta, Srivastava (bib19) 2016; 55
Pegoretti, Zanolli, Migliaresi (bib62) 2006; 66
Syed Abdullah, Iannucci, Greenhalgh, Ahmad (bib66) 2021; 265
Medeiros Araujo, Pegoretti (bib64) 2013; 20
Garg, Sharma, Kumar, Manna, Li (bib195) 2022; 61
Zhao, Yu, Huang, Yin, Peng, Sun (bib72) 2019; 174
Barile, Casavola (bib143) 2019
Sathishkumar, Naveen, Satheeshkumar (bib18) 2014; 33
Zhao, Jing, Chen, Xu, Hou (bib173) 2021; 57
Chen, Wu, Ge, Zhao, Liu, Hong (bib117) 2016; 82
Mahesh, Mahesh, Harursampath (bib90) 2022; 8
Punetha, Rana, Yoo, Chaurasia, McLeskey, Ramasamy (bib40) 2017; 67
Sharma, Singh, Sharma, Sharma, Shukla, Li (bib196) 2022; 14
Kumar, Manna, Dang (bib10) 2022; 50
Zhang, Huang, Wang, Li, Wang (bib183) 2023; 30
Zhou, Zhang, Wu, Huang (bib73) 2013; 44
Pegoretti, Zanolli, Migliaresi (bib63) 2006; 66
Gulati, Shukla, Gupta, Singh, Kumar, Singh (bib157) 2019; 26
Abdellaoui, Raji, Essabir, Bouhfid, Qaiss (bib26) 2019
Lin, Bang, Malakooti, Sodano (bib70) 2017; 9
Yadav, Singh, Chaudhary, Garg, Sharma, Kumar (bib192) 2023
Yavas, Zhang, Liu, Wu (bib36) 2021; 204
Jia, Yang (bib49) 2012; 502
Su, Meng, Su (bib169) 2023; 14
Keyte, Pancholi, Njuguna (bib115) 2019; 6
Puglia, Biagiotti, Kenny (bib11) 2005; 1
Hou, Xu, Han, Wang, Tong (bib140) 2019; 143
Sathish, Kumaresan, Prabhu, Gokulkumar, Karthi, Vigneshkumar (bib92) 2020; 27
Dickson, Ross, Dowling (bib35) 2018; 206
Hu, He, Zhang, Huang, Li, Zhang (bib189) 2023; 18
Saba N, Paridah MT, Jawaid M. Mechanical properties of kenaf fibre reinforced polymer composite: A review. Construct Build Mater 2015;76:87–96.
Gokulkumar, Thyla, Prabhu, Sathish, Karthi (bib129) 2019; 27
Wang, Chong, Lv, Wang, Ji, Yun (bib178) 2023; 157
Wang, Yang, Liu, Tang, Zhao, Lu (bib118) 2017; 113
Pickering, Efendy, Le (bib13) 2016; 83
Zhang, Xiong, Su, Li, Yin, Yao (bib164) 2022; 33
Hussain, Yorucu, Ahmed, Hussain, Chen, Bilal Khan
Sathishkumar (10.1016/j.jmrt.2023.08.036_bib18) 2014; 33
Rahman (10.1016/j.jmrt.2023.08.036_bib23) 2019
Pi (10.1016/j.jmrt.2023.08.036_bib126) 2019; 103
Ku (10.1016/j.jmrt.2023.08.036_bib53) 2011; 42
Sharma (10.1016/j.jmrt.2023.08.036_bib155) 2018; 5
Wang (10.1016/j.jmrt.2023.08.036_bib5) 2022; 15
Silva (10.1016/j.jmrt.2023.08.036_bib81) 2009; 32
Alam (10.1016/j.jmrt.2023.08.036_bib120) 2015; 8
Su (10.1016/j.jmrt.2023.08.036_bib169) 2023; 14
Chandel (10.1016/j.jmrt.2023.08.036_bib154) 2021; 3
Holmes (10.1016/j.jmrt.2023.08.036_bib133) 2017; 61
Abdellaoui (10.1016/j.jmrt.2023.08.036_bib26) 2019
Mn (10.1016/j.jmrt.2023.08.036_bib102) 2010; 4
Duflou (10.1016/j.jmrt.2023.08.036_bib3) 2012; 37
Oushabi (10.1016/j.jmrt.2023.08.036_bib130) 2017; 23
Lebreton (10.1016/j.jmrt.2023.08.036_bib6) 2017; 8
Zhang (10.1016/j.jmrt.2023.08.036_bib164) 2022; 33
Xu (10.1016/j.jmrt.2023.08.036_bib179) 2022; 12
Scaffaro (10.1016/j.jmrt.2023.08.036_bib7) 2018; 112
Chukov (10.1016/j.jmrt.2023.08.036_bib77) 2014; 586
Forintos (10.1016/j.jmrt.2023.08.036_bib135) 2019; 162
Sherif (10.1016/j.jmrt.2023.08.036_bib75) 2020; 12
Zhou (10.1016/j.jmrt.2023.08.036_bib73) 2013; 44
Ismail (10.1016/j.jmrt.2023.08.036_bib95) 2021; 13
Puglia (10.1016/j.jmrt.2023.08.036_bib11) 2005; 1
Scholz (10.1016/j.jmrt.2023.08.036_bib147) 2011; 71
Patel (10.1016/j.jmrt.2023.08.036_bib106) 2018; 1953
Lancaster (10.1016/j.jmrt.2023.08.036_bib1) 1980
Zhang (10.1016/j.jmrt.2023.08.036_bib161) 2022; 424
Liew (10.1016/j.jmrt.2023.08.036_bib30) 2017; 2017
Nagaraja (10.1016/j.jmrt.2023.08.036_bib46) 2021; 34
Turla (10.1016/j.jmrt.2023.08.036_bib114) 2014; 3
Li (10.1016/j.jmrt.2023.08.036_bib56) 2021; 55
Barile (10.1016/j.jmrt.2023.08.036_bib143) 2019
Yeswanth (10.1016/j.jmrt.2023.08.036_bib153) 2022; 4
Yang (10.1016/j.jmrt.2023.08.036_bib170) 2022; 21
Rong (10.1016/j.jmrt.2023.08.036_bib124) 2001; 61
Keyte (10.1016/j.jmrt.2023.08.036_bib115) 2019; 6
Vallittu (10.1016/j.jmrt.2023.08.036_bib148) 2015; 31
Hussain (10.1016/j.jmrt.2023.08.036_bib52) 2012; 510–511
Guo (10.1016/j.jmrt.2023.08.036_bib184) 2022; 12
Sahoo (10.1016/j.jmrt.2023.08.036_bib39) 2010; 35
Shahzad (10.1016/j.jmrt.2023.08.036_bib31) 2013; 2013
10.1016/j.jmrt.2023.08.036_bib167
Prakash Dwivedi (10.1016/j.jmrt.2023.08.036_bib193) 2023
Kumar (10.1016/j.jmrt.2023.08.036_bib150) 2022; 20
Sun (10.1016/j.jmrt.2023.08.036_bib188) 2023; 387
Nair (10.1016/j.jmrt.2023.08.036_bib21) 2014
Zhao (10.1016/j.jmrt.2023.08.036_bib173) 2021; 57
Komorek (10.1016/j.jmrt.2023.08.036_bib111) 2021; 256
Fu (10.1016/j.jmrt.2023.08.036_bib185) 2020; 164
Zhao (10.1016/j.jmrt.2023.08.036_bib72) 2019; 174
Amiri (10.1016/j.jmrt.2023.08.036_bib138) 2018; 232
Dickson (10.1016/j.jmrt.2023.08.036_bib35) 2018; 206
Jha (10.1016/j.jmrt.2023.08.036_bib152) 2021; 13
Wang (10.1016/j.jmrt.2023.08.036_bib174) 2023; 23
Zhou (10.1016/j.jmrt.2023.08.036_bib50) 2018; 143
Nourbakhsh (10.1016/j.jmrt.2023.08.036_bib78) 2011; 33
Qureshi (10.1016/j.jmrt.2023.08.036_bib4) 2022; 10
Manral (10.1016/j.jmrt.2023.08.036_bib87) 2021; 34
Abdullah (10.1016/j.jmrt.2023.08.036_bib67) 2021; 28
Chukov (10.1016/j.jmrt.2023.08.036_bib74) 2019; 15
Garg (10.1016/j.jmrt.2023.08.036_bib195) 2022; 61
Dong (10.1016/j.jmrt.2023.08.036_bib160) 2023; 6
Syed Abdullah (10.1016/j.jmrt.2023.08.036_bib66) 2021; 265
Lin (10.1016/j.jmrt.2023.08.036_bib70) 2017; 9
Mao (10.1016/j.jmrt.2023.08.036_bib132) 2019; 426–427
Dangsheng (10.1016/j.jmrt.2023.08.036_bib76) 2005; 59
Sharma (10.1016/j.jmrt.2023.08.036_bib196) 2022; 14
10.1016/j.jmrt.2023.08.036_bib89
Raja (10.1016/j.jmrt.2023.08.036_bib17) 2021; 13
Zhang (10.1016/j.jmrt.2023.08.036_bib163) 2022; 224
Cheon (10.1016/j.jmrt.2023.08.036_bib68) 2021; 217
Chen (10.1016/j.jmrt.2023.08.036_bib172) 2023; 940
Khare (10.1016/j.jmrt.2023.08.036_bib110) 2021; 38
Jawaid (10.1016/j.jmrt.2023.08.036_bib79) 2011; 86
Naito (10.1016/j.jmrt.2023.08.036_bib82) 2009
Hussain (10.1016/j.jmrt.2023.08.036_bib48) 2014; 258
Patterson (10.1016/j.jmrt.2023.08.036_bib69) 2018; 161
Yang (10.1016/j.jmrt.2023.08.036_bib38) 2021; 200
Zhang (10.1016/j.jmrt.2023.08.036_bib165) 2022; 206
Zou (10.1016/j.jmrt.2023.08.036_bib146) 2019; 48
Karthik (10.1016/j.jmrt.2023.08.036_bib105) 2022; 62
Chandra Shekar (10.1016/j.jmrt.2023.08.036_bib112) 2021; 41
Yang (10.1016/j.jmrt.2023.08.036_bib176) 2023; 22
Nasser (10.1016/j.jmrt.2023.08.036_bib54) 2019; 174
Mishra (10.1016/j.jmrt.2023.08.036_bib15) 2022; 9
Bouwmeester (10.1016/j.jmrt.2023.08.036_bib85) 2008; 1
Mahesh (10.1016/j.jmrt.2023.08.036_bib90) 2022; 8
Peng (10.1016/j.jmrt.2023.08.036_bib159) 2022; 22
Begum (10.1016/j.jmrt.2023.08.036_bib27) 2020; 6
Panthapulakkal (10.1016/j.jmrt.2023.08.036_bib20) 2017
Ghalia (10.1016/j.jmrt.2023.08.036_bib25) 2019
Punetha (10.1016/j.jmrt.2023.08.036_bib40) 2017; 67
Zhang (10.1016/j.jmrt.2023.08.036_bib180) 2023; 384
Chen (10.1016/j.jmrt.2023.08.036_bib117) 2016; 82
Jha (10.1016/j.jmrt.2023.08.036_bib151) 2022; 51
Bai (10.1016/j.jmrt.2023.08.036_bib97) 2021; 213
Gupta (10.1016/j.jmrt.2023.08.036_bib19) 2016; 55
Shao (10.1016/j.jmrt.2023.08.036_bib187) 2023; 486
Swolfs (10.1016/j.jmrt.2023.08.036_bib104) 2019; 64
Singh (10.1016/j.jmrt.2023.08.036_bib136) 2014; 14
Zheng (10.1016/j.jmrt.2023.08.036_bib2) 2022; 233
Zhao (10.1016/j.jmrt.2023.08.036_bib175) 2022; 21
Maryanka (10.1016/j.jmrt.2023.08.036_bib145) 2014
Karthik (10.1016/j.jmrt.2023.08.036_bib194) 2023
Manaia (10.1016/j.jmrt.2023.08.036_bib93) 2021; 13
Ashworth (10.1016/j.jmrt.2023.08.036_bib139) 2016; 105
Gulati (10.1016/j.jmrt.2023.08.036_bib157) 2019; 26
10.1016/j.jmrt.2023.08.036_bib33
10.1016/j.jmrt.2023.08.036_bib32
Cheng (10.1016/j.jmrt.2023.08.036_bib47) 2018; 347
Arockiam (10.1016/j.jmrt.2023.08.036_bib144) 2018
Barile (10.1016/j.jmrt.2023.08.036_bib34) 2018
Pegoretti (10.1016/j.jmrt.2023.08.036_bib63) 2006; 66
Costa (10.1016/j.jmrt.2023.08.036_bib99) 2020; 9
Paulraj (10.1016/j.jmrt.2023.08.036_bib29) 2021; 58
Yavas (10.1016/j.jmrt.2023.08.036_bib36) 2021; 204
Du (10.1016/j.jmrt.2023.08.036_bib128) 2023; 137
Gao (10.1016/j.jmrt.2023.08.036_bib45) 2021; 91
Wang (10.1016/j.jmrt.2023.08.036_bib43) 2019; 181
Morino (10.1016/j.jmrt.2023.08.036_bib94) 2021; 26
Pickering (10.1016/j.jmrt.2023.08.036_bib13) 2016; 83
Demircan (10.1016/j.jmrt.2023.08.036_bib57) 2020; 29
Gokulkumar (10.1016/j.jmrt.2023.08.036_bib129) 2019; 27
Kumar (10.1016/j.jmrt.2023.08.036_bib10) 2022; 50
Costa (10.1016/j.jmrt.2023.08.036_bib101) 2019; 11
Wang (10.1016/j.jmrt.2023.08.036_bib119) 2019; 54
Zhou (10.1016/j.jmrt.2023.08.036_bib177) 2021; 7
Bhuvaneswari (10.1016/j.jmrt.2023.08.036_bib190) 2022; 14
Prasad (10.1016/j.jmrt.2023.08.036_bib109) 2021; 18
Zhang (10.1016/j.jmrt.2023.08.036_bib183) 2023; 30
Wang (10.1016/j.jmrt.2023.08.036_bib122) 2019; 10
Hu (10.1016/j.jmrt.2023.08.036_bib189) 2023; 18
Ismail (10.1016/j.jmrt.2023.08.036_bib41) 2021; 8
Puttegowda (10.1016/j.jmrt.2023.08.036_bib22) 2018
Luo (10.1016/j.jmrt.2023.08.036_bib71) 2017; 51
Saravanan (10.1016/j.jmrt.2023.08.036_bib197) 2022
Belingardi (10.1016/j.jmrt.2023.08.036_bib141) 2014; 1
Sharma (10.1016/j.jmrt.2023.08.036_bib156) 2021; 46
Li (10.1016/j.jmrt.2023.08.036_bib168) 2023; 303
Yang (10.1016/j.jmrt.2023.08.036_bib186) 2022; 154
Pullen (10.1016/j.jmrt.2023.08.036_bib59) 2015; 28
Prince (10.1016/j.jmrt.2023.08.036_bib9) 2022; 62
Kumar (10.1016/j.jmrt.2023.08.036_bib28) 2017; 6
Alberto (10.1016/j.jmrt.2023.08.036_bib131) 2013
Alves Fidelis (10.1016/j.jmrt.2023.08.036_bib12) 2013; 2
Qu (10.1016/j.jmrt.2023.08.036_bib37) 2021; 210
Wang (10.1016/j.jmrt.2023.08.036_bib44) 2020; 22
Abdullah (10.1016/j.jmrt.2023.08.036_bib65) 2018; 202
Swolfs (10.1016/j.jmrt.2023.08.036_bib103) 2014; 67
Costa (10.1016/j.jmrt.2023.08.036_bib100) 2021; 13
Karbalaie (10.1016/j.jmrt.2023.08.036_bib58) 2012; 25
Ding (10.1016/j.jmrt.2023.08.036_bib55) 2019; 9
Pegoretti (10.1016/j.jmrt.2023.08.036_bib62) 2006; 66
Pegoretti (10.1016/j.jmrt.2023.08.036_bib16) 2004; 53
Kumar Rout (10.1016/j.jmrt.2023.08.036_bib123) 2016; 11
Wang (10.1016/j.jmrt.2023.08.036_bib178) 2023; 157
Nie (10.1016/j.jmrt.2023.08.036_bib116) 2021; 56
Rajak (10.1016/j.jmrt.2023.08.036_bib24) 2019; 8
Singh (10.1016/j.jmrt.2023.08.036_bib14) 2021; 42
Rahman (10.1016/j.jmrt.2023.08.036_bib198) 2022; 15
Zhang (10.1016/j.jmrt.2023.08.036_bib181) 2023; 71
Sathishkumar (10.1016/j.jmrt.2023.08.036_bib83) 2014; 33
Wang (10.1016/j.jmrt.2023.08.036_bib60) 2017; 61
Solazzi (10.1016/j.jmrt.2023.08.036_bib134) 2019; 26
Lazar (10.1016/j.jmrt.2023.08.036_bib149) 2016; 27
Jia (10.1016/j.jmrt.2023.08.036_bib49) 2012; 502
Landesmann (10.1016/j.jmrt.2023.08.036_bib42) 2015; 18
Yusuff (10.1016/j.jmrt.2023.08.036_bib96) 2021; 22
Jia (10.1016/j.jmrt.2023.08.036_bib91) 2018; 6
Huang (10.1016/j.jmrt.2023.08.036_bib182) 2021; 15
Vasudevan (10.1016/j.jmrt.2023.08.036_bib113) 2018; 0
Yadav (10.1016/j.jmrt.2023.08.036_bib192) 2023
Park (10.1016/j.jmrt.2023.08.036_bib51) 2018; 184
Hanan (10.1016/j.jmrt.2023.08.036_bib107) 2020; 17
Lu (10.1016/j.jmrt.2023.08.036_bib125) 2018; 91
Wagh (10.1016/j.jmrt.2023.08.036_bib142) 2018; 2018
Heimbs (10.1016/j.jmrt.2023.08.036_bib61) 2019; 233
Hou (10.1016/j.jmrt.2023.08.036_bib140) 2019; 143
Li (10.1016/j.jmrt.2023.08.036_bib171) 2022; 21
Sathish (10.1016/j.jmrt.2023.08.036_bib92) 2020; 27
Liu (10.1016/j.jmrt.2023.08.036_bib8) 2021; 56
Kojovic (10.1016/j.jmrt.2023.08.036_bib84) 2009; 15
Kobayashi (10.1016/j.jmrt.2023.08.036_bib121) 2014; 59
Kumar (10.1016/j.jmrt.2023.08.036_bib191) 2022
Du (10.1016/j.jmrt.2023.08.036_bib127) 2023; 72
Manjunath (10.1016/j.jmrt.2023.08.036_bib137) 2021; 7
Banerjee (10.1016/j.jmrt.2023.08.036_bib199) 2023
Ansell (10.1016/j.jmrt.2023.08.036_bib80) 2009; 2
Harikumar (10.1016/j.jmrt.2023.08.036_bib98) 2021; 39
Das (10.1016/j.jmrt.2023.08.036_bib86) 2019; 110
Ramesh (10.1016/j.jmrt.2023.08.036_bib108) 2018; 6
Chawla (10.1016/j.jmrt.2023.08.036_bib158) 2013; 9
Wang (10.1016/j.jmrt.2023.08.036_bib118) 2017; 113
Shi (10.1016/j.jmrt.2023.08.036_bib166) 2022; 61
Medeiros Araujo (10.1016/j.jmrt.2023.08.036_bib64) 2013; 20
Wang (10.1016/j.jmrt.2023.08.036_bib88) 2019; 12
Dai (10.1016/j.jmrt.2023.08.036_bib162) 2022; 614
References_xml – volume: 27
  start-page: 2474
  year: 2019
  end-page: 2476
  ident: bib129
  article-title: A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP
  publication-title: Mater Today Proc
– volume: 9
  start-page: 11167
  year: 2017
  end-page: 11175
  ident: bib70
  article-title: Isolation of aramid nanofibers for high strength and toughness polymer nanocomposites
  publication-title: ACS Appl Mater Interfaces
– volume: 59
  start-page: 175
  year: 2005
  end-page: 179
  ident: bib76
  article-title: Friction and wear properties of UHMWPE composites reinforced with carbon fiber
  publication-title: Mater Lett
– volume: 424
  year: 2022
  ident: bib161
  article-title: Radionuclide transport in multi-scale fractured rocks: a review
  publication-title: J Hazard Mater
– volume: 15
  year: 2019
  ident: bib74
  article-title: Effect of carbon fiber surface modification on their interfacial interaction with polysulfone
  publication-title: Results Phys
– volume: 13
  year: 2021
  ident: bib95
  article-title: The effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites
  publication-title: Polymers
– volume: 258
  start-page: 458
  year: 2014
  end-page: 466
  ident: bib48
  article-title: Surface modification of aramid fibres by graphene oxide nano-sheets for multiscale polymer composites
  publication-title: Surf Coating Technol
– volume: 42
  start-page: 856
  year: 2011
  end-page: 873
  ident: bib53
  article-title: A review on the tensile properties of natural fiber reinforced polymer composites
  publication-title: Composites Part B
– year: 2023
  ident: bib199
  article-title: Prediction and simulation of mechanical properties of Borophene reinforced Epoxy Nanocomposites using Molecular Dynamics and FEA analysis
  publication-title: Rev Adv Mater Sci
– volume: 59
  start-page: 1
  year: 2014
  end-page: 8
  ident: bib121
  article-title: Processing and characterization of hemp fiber textile composites with micro-braiding technique
  publication-title: Compos Part A Appl Sci Manuf
– volume: 184
  start-page: 800
  year: 2018
  end-page: 806
  ident: bib51
  article-title: Structural design and test of automobile bonnet with natural flax composite through impact damage analysis
  publication-title: Compos Struct
– volume: 6
  start-page: 1
  year: 2019
  end-page: 30
  ident: bib115
  article-title: Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites
  publication-title: Front Mater
– volume: 143
  year: 2019
  ident: bib140
  article-title: Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles
  publication-title: Thin-Walled Struct
– volume: 28
  start-page: 1255
  year: 2021
  end-page: 1276
  ident: bib67
  article-title: A plane-stress damage model for vectran laminated composite
  publication-title: Appl Compos Mater
– volume: 15
  start-page: 2618
  year: 2022
  ident: bib5
  article-title: Synthesis, characterization, and modeling of aligned ZnO nanowire-enhanced carbon-fiber-reinforced composites
  publication-title: Materials
– volume: 35
  start-page: 837
  year: 2010
  end-page: 867
  ident: bib39
  article-title: Polymer nanocomposites based on functionalized carbon nanotubes
  publication-title: Prog Polym Sci
– volume: 30
  start-page: 1170
  year: 2023
  end-page: 1177
  ident: bib183
  article-title: Design of bioinspired highly aligned bamboo-mimetic metamaterials with structural and functional anisotropy
  publication-title: IEEE Trans Dielectr Electr Insul
– volume: 61
  start-page: 1437
  year: 2001
  end-page: 1447
  ident: bib124
  article-title: The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
  publication-title: Compos Sci Technol
– volume: 426–427
  start-page: 1033
  year: 2019
  end-page: 1039
  ident: bib132
  article-title: The wear resistance improvement of fibre reinforced polymer composite gears
  publication-title: Wear
– volume: 224
  year: 2022
  ident: bib163
  article-title: Plutonium reactive transport in fractured granite: multi-species experiments and simulations
  publication-title: Water Res
– volume: 61
  start-page: 294
  year: 2017
  end-page: 298
  ident: bib133
  article-title: High volume composites for the automotive challenge
  publication-title: Reinforc Plast
– volume: 4
  start-page: 1139
  year: 2010
  end-page: 1143
  ident: bib102
  article-title: Influence of Ti
  publication-title: J Cent South Univ Technol
– volume: 164
  year: 2020
  ident: bib185
  article-title: Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones
  publication-title: Corrosion Sci
– start-page: 123
  year: 2019
  ident: bib25
  article-title: Compressive and fracture toughness of natural and synthetic fiber-reinforced polymer
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
– volume: 58
  start-page: 100
  year: 2021
  end-page: 118
  ident: bib29
  article-title: Investigation on recent research of mechanical properties of natural fiber reinforced composites (NFRP) materials
  publication-title: Mater Plast
– volume: 66
  start-page: 1970
  year: 2006
  ident: bib63
  article-title: Preparation and tensile mechanical properties of unidirectional liquid crystalline single-polymer composites
  publication-title: Compos Sci Technol
– volume: 217
  year: 2021
  ident: bib68
  article-title: Impact resistance and interlaminar shear strength enhancement of carbon fiber reinforced thermoplastic composites by introducing MWCNT-anchored carbon fiber
  publication-title: Composites Part B
– volume: 486
  year: 2023
  ident: bib187
  article-title: Functional metal/covalent organic framework materials for triboelectric nanogenerator
  publication-title: Coord Chem Rev
– volume: 44
  start-page: 493
  year: 2013
  end-page: 499
  ident: bib73
  article-title: Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites
  publication-title: Mater Des
– volume: 112
  start-page: 315
  year: 2018
  end-page: 327
  ident: bib7
  article-title: Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves
  publication-title: Compos Part A Appl Sci Manuf
– volume: 2018
  year: 2018
  ident: bib142
  article-title: Investigation of mechanical and tribological behavior of composite material filled with black epoxy resin and aluminium tri-hydroxide using reinforcement of glass fiber
  publication-title: AIP Conf Proc
– volume: 71
  year: 2023
  ident: bib181
  article-title: Experimental study of a composite beam externally bonded with a carbon fiber-reinforced plastic plate
  publication-title: J Build Eng
– volume: 54
  start-page: 3847
  year: 2019
  end-page: 3862
  ident: bib119
  article-title: Improvement of mechanical properties and thermal conductivity of carbon fiber laminated composites through depositing graphene nanoplatelets on fibers
  publication-title: J Mater Sci
– volume: 28
  year: 2015
  ident: bib59
  article-title: Characterization of the mechanical behavior of a polymer-based laminate and constituent fibers at various quasi-static strain rates
  publication-title: J Aero Eng
– volume: 33
  start-page: 454
  year: 2014
  end-page: 471
  ident: bib18
  article-title: Hybrid fiber reinforced polymer composites - a review
  publication-title: J Reinforc Plast Compos
– volume: 8
  year: 2021
  ident: bib41
  article-title: Mechanical properties of Carbon-matrix composites for a blade runner's artificial leg
  publication-title: Cogent Eng
– volume: 206
  year: 2022
  ident: bib165
  article-title: Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy
  publication-title: Vacuum
– start-page: 315
  year: 2018
  end-page: 351
  ident: bib22
  article-title: Potential of natural/synthetic hybrid composites for aerospace applications
  publication-title: Sustain. Compos. Aerosp. Appl
– volume: 233
  start-page: 951
  year: 2019
  end-page: 966
  ident: bib61
  article-title: Comparison of impact behaviour of glass, carbon and Dyneema composites
  publication-title: Proc Inst Mech Eng Part C J Mech Eng Sci
– volume: 23
  start-page: 116
  year: 2017
  end-page: 123
  ident: bib130
  article-title: The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): study of the interface of DPF–Polyurethane composite
  publication-title: South Afr J Chem Eng
– volume: 174
  year: 2019
  ident: bib72
  article-title: High-performance polyphenylene sulfide composites with ultra-high content of glass fiber fabrics
  publication-title: Compos Part B
– volume: 22
  year: 2022
  ident: bib159
  article-title: Numerical investigation of brittleness effect on strength and microcracking behavior of crystalline rock
  publication-title: Int J GeoMech
– reference: Song X, Wang P. The characterization of mechanical properties of jute/PLA composites with modified nano sio2 by coupling agent n.d.:1–18.
– volume: 26
  start-page: 1145
  year: 2019
  end-page: 1150
  ident: bib157
  article-title: Microstructural analysis of friction stir welded Mg AZ31 alloy
  publication-title: Mater Today Proc
– volume: 387
  year: 2023
  ident: bib188
  article-title: High-Efficiency utilization of waste shield slurry: a geopolymeric Flocculation-Filtration-Solidification method
  publication-title: Construct Build Mater
– volume: 91
  start-page: 21
  year: 2018
  end-page: 28
  ident: bib125
  article-title: Improved interfacial strength of SiO2 coated carbon fiber in cement matrix
  publication-title: Cem Concr Compos
– volume: 62
  start-page: 2297
  year: 2022
  end-page: 2302
  ident: bib9
  article-title: Effect of Hybridization, manufacturing methods and factors influencing natural fibers reinforced composites and its commercial applications – a review
  publication-title: Mater Today Proc
– volume: 347
  start-page: 483
  year: 2018
  end-page: 492
  ident: bib47
  article-title: Aramid fiber with excellent interfacial properties suitable for resin composite in a wide polarity range
  publication-title: Chem Eng J
– volume: 20
  start-page: 287
  year: 2013
  end-page: 298
  ident: bib64
  article-title: Liquid crystalline single-polymer short-fibers composites
  publication-title: Compos Interfac
– volume: 154
  year: 2022
  ident: bib186
  article-title: Comparison of toughening mechanisms in natural silk-reinforced composites with three epoxy resin matrices
  publication-title: Compos Appl Sci Manuf
– volume: 232
  start-page: 28
  year: 2018
  end-page: 38
  ident: bib138
  article-title: Design and manufacturing of a hybrid flax/carbon fiber composite bicycle frame
  publication-title: Proc Inst Mech Eng P J Sports Eng Technol
– volume: 113
  start-page: 68
  year: 2017
  end-page: 75
  ident: bib118
  article-title: Tunable crack propagation behavior in carbon fi ber reinforced plastic laminates with polydopamine and graphene oxide treated fibers
  publication-title: JMADE
– volume: 9
  year: 2022
  ident: bib15
  article-title: A state-of-the-art review on potential applications of natural fiber-reinforced polymer composite filled with inorganic nanoparticle
  publication-title: Compos Part C Open Access
– volume: 384
  year: 2023
  ident: bib180
  article-title: Fresh, mechanical and microstructural properties of alkali-activated composites incorporating nanomaterials: a comprehensive review
  publication-title: J Clean Prod
– volume: 23
  start-page: 1130
  year: 2023
  end-page: 1140
  ident: bib174
  article-title: Effects of Al and La elements on mechanical properties of CoNiFe0.6Cr0.6 high-entropy alloys: a first-principles study
  publication-title: J Mater Res Technol
– volume: 26
  start-page: 1228
  year: 2021
  ident: bib94
  article-title: Influence of epoxy resin treatment on the mechanical and tribological properties of hemp-fiber-reinforced plant-derived polyamide 1010 biomass composites
  publication-title: Molecules
– start-page: 103
  year: 2019
  ident: bib26
  article-title: Mechanical behavior of carbon/natural fiber-based hybrid composites
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
– volume: 157
  start-page: 98
  year: 2023
  end-page: 106
  ident: bib178
  article-title: High-entropy ferroelastic (10RE0.1)TaO4 ceramics with oxygen vacancies and improved thermophysical properties
  publication-title: J Mater Sci Technol
– volume: 12
  year: 2022
  ident: bib179
  article-title: Study on the annealing phase transformation mechanism and electrochemical properties of carbon submicron fibers loaded with cobalt
  publication-title: Materials Express
– volume: 6
  start-page: 4
  year: 2017
  end-page: 7
  ident: bib28
  article-title: Preparation and mechanical properties of jute fiber reinforced epoxy composites
  publication-title: Ind Eng Manag
– volume: 21
  start-page: 546
  year: 2022
  end-page: 560
  ident: bib175
  article-title: Co-precipitated Ni/Mn shell coated nano Cu-rich core structure: a phase-field study
  publication-title: Journal of Materials Research echnology
– volume: 206
  start-page: 637
  year: 2018
  end-page: 643
  ident: bib35
  article-title: Additive manufacturing of woven carbon fibre polymer composites
  publication-title: Compos Struct
– volume: 940
  year: 2023
  ident: bib172
  article-title: Microstructural evolution in graphene nanoplatelets reinforced magnesium matrix composites fabricated through thixomolding process
  publication-title: J Alloys Compd
– volume: 586
  start-page: S459
  year: 2014
  end-page: S463
  ident: bib77
  article-title: Surface modification of carbon fibers and its effect on the fiber-matrix interaction of UHMWPE based composites
  publication-title: J Alloys Compd
– volume: 9
  start-page: 578
  year: 2019
  end-page: 586
  ident: bib55
  article-title: Influences of graphene oxide addition on mechanical properties of aramid fiber reinforced composites
  publication-title: Mater Express
– start-page: 3
  year: 2013
  end-page: 40
  ident: bib131
  article-title: Introduction of fibre-reinforced polymers − polymers and composites: concepts, properties and processes
  publication-title: Fiber reinf. Polym. - technol. Appl. Concr. Repair
– reference: Tao Shi, Y. L. Z. H. Deformation performance and fracture toughness of carbon nanofiber modified cement-based materials. ACI Mater J, 119(5). doi: 10.14359/51735976.
– volume: 6
  start-page: 547
  year: 2020
  end-page: 564
  ident: bib27
  article-title: Polymer matrix composite with natural and synthetic fibres
  publication-title: Adv Mater Process Technol
– volume: 56
  start-page: 15733
  year: 2021
  end-page: 15751
  ident: bib8
  article-title: Degradable bio-based epoxy vitrimers based on imine chemistry and their application in recyclable carbon fiber composites
  publication-title: J Mater Sci
– volume: 13
  start-page: 3859
  year: 2021
  ident: bib17
  article-title: Thermal and flame retardant behavior of neem and banyan fibers when reinforced with a bran particulate epoxy hybrid composite
  publication-title: Polymers
– volume: 4
  year: 2022
  ident: bib153
  article-title: Recent developments in RAM based MWCNT composite materials: a short review
  publication-title: Funct Compos Struct
– volume: 17
  start-page: 155
  year: 2020
  end-page: 167
  ident: bib107
  article-title: Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites
  publication-title: J Nat Fibers
– volume: 2017
  start-page: 1
  year: 2017
  end-page: 10
  ident: bib30
  article-title: Thermomechanical properties of jute/bamboo cellulose composite and its hybrid composites: the effects of treatment and fiber loading
  publication-title: Adv Mater Sci Eng
– volume: 210
  year: 2021
  ident: bib37
  article-title: Improving cryogenic mechanical properties of carbon fiber reinforced composites based on epoxy resin toughened by hydroxyl-terminated polyurethane
  publication-title: Composites Part B
– volume: 51
  start-page: 2642S
  year: 2022
  end-page: 2664S
  ident: bib151
  article-title: Effect of hybridization on physio-mechanical behavior of Vetiver and Jute fibers reinforced epoxy composites for structural applications: studies on fabrication, physicomechanical, water-absorption, and morphological properties
  publication-title: J Ind Text
– volume: 33
  year: 2022
  ident: bib164
  article-title: Molecular dynamics simulation and experimental study of tin growth in SAC lead-free microsolder joints under thermo-mechanical-electrical coupling
  publication-title: Mater Today Commun
– volume: 55
  start-page: 626
  year: 2016
  end-page: 642
  ident: bib19
  article-title: Mechanical properties of hybrid fibers-reinforced polymer composite: a review
  publication-title: Polym Plast Technol Eng
– volume: 48
  start-page: 185
  year: 2019
  end-page: 190
  ident: bib146
  article-title: The influence of zirconia fibre on ablative composite materials
  publication-title: Plast, Rubber Compos
– volume: 53
  start-page: 1290
  year: 2004
  end-page: 1297
  ident: bib16
  article-title: Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties
  publication-title: Polym Int
– volume: 202
  start-page: 566
  year: 2018
  end-page: 577
  ident: bib65
  article-title: On the translaminar fracture toughness of Vectran/epoxy composite material
  publication-title: Compos Struct
– volume: 62
  start-page: 714
  year: 2022
  end-page: 720
  ident: bib105
  article-title: Experimental investigation on hybrid fibre reinforced polymer epoxy LY556 composites by vacuum bag molding
  publication-title: Mater Today Proc
– volume: 21
  start-page: 4138
  year: 2022
  end-page: 4150
  ident: bib171
  article-title: Microstructure and properties of graphene nanoplatelets reinforced AZ91D matrix composites prepared by electromagnetic stirring casting
  publication-title: J Mater Res Technol
– start-page: 87
  year: 1980
  end-page: 109
  ident: bib1
  article-title: Metall. Weld
  publication-title: Brazing, soldering and adhesive bonding
– volume: 143
  start-page: 316
  year: 2018
  end-page: 323
  ident: bib50
  article-title: Effect of hydrogen bonding on the liquid crystalline behavior of Poly(p-phenylene terephthamide) in sulfuric acid
  publication-title: Polymer
– year: 2023
  ident: bib192
  article-title: Dry sliding wear characteristics of natural fibre reinforced poly-lactic acid composites for Engineering applications: fabrication, properties and characterizations
  publication-title: J Mater Res Technol
– volume: 20
  start-page: 720
  year: 2022
  end-page: 739
  ident: bib150
  article-title: Neutrosophic entropy-based ingenious measurement for fast fourier transforms based classification of process-parameters and wear resistance of friction-stir processed hybrid AA7075- B4C aluminium metal-matrix composites
  publication-title: J Mater Res Technol
– volume: 51
  start-page: 129
  year: 2017
  end-page: 139
  ident: bib71
  article-title: Journal of Industrial and Engineering Chemistry Enhanced interfacial adhesion between polypropylene and carbon fi ber by graphene oxide/polyethyleneimine coating
  publication-title: J Ind Eng Chem
– volume: 0
  start-page: 1
  year: 2018
  end-page: 15
  ident: bib113
  article-title: International Journal of Polymer Analysis and Experimental and analytical investigation of thermo-mechanical responses of pure epoxy and carbon/Kevlar/S-glass/E-glass/epoxy interply hybrid laminated composites for aerospace applications
  publication-title: Int J Polym Anal Char
– start-page: 81
  year: 2019
  end-page: 102
  ident: bib23
  article-title: Tensile properties of natural and synthetic fiber-reinforced polymer composites
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
– year: 2023
  ident: bib194
  article-title: Study on the physicomechanical, fracturedeformation, interface-adhesion, and water-absorption properties of twill fabric cotton-bamboo/epoxy composites
  publication-title: J Mater Res Technol
– volume: 6
  start-page: 59
  year: 2018
  ident: bib91
  article-title: Influence of furfuryl alcohol fiber pre-treatment on the moisture absorption and mechanical properties of flax fiber composites
  publication-title: Fibers
– volume: 510–511
  start-page: 443
  year: 2012
  end-page: 447
  ident: bib52
  article-title: SEM examination and analysis of the interface character in surface modified aramid-epoxy composite
  publication-title: Key Eng Mater
– volume: 1953
  year: 2018
  ident: bib106
  article-title: Fabrication and characterization of high impact hybrid matrix composites from thermoset resin and dyneema-glass fabric reinforcement
  publication-title: AIP Conf Proc
– volume: 13
  start-page: 3260
  year: 2021
  ident: bib152
  article-title: Assessment of dimensional stability, biodegradability, and fracture energy of bio-composites reinforced with novel pine cone
  publication-title: Polymers
– volume: 14
  year: 2022
  ident: bib196
  article-title: Studies on the utilization of marble dust, bagasse ash, and paddy straw wastes to improve the mechanical characteristics of unfired soil blocks
  publication-title: Sustainability
– volume: 33
  start-page: 183
  year: 2011
  end-page: 187
  ident: bib78
  article-title: Nano-SiO2 filled rice husk/polypropylene composites: physico-mechanical properties
  publication-title: Ind Crops Prod
– start-page: 387
  year: 2019
  end-page: 407
  ident: bib143
  article-title: Mechanical characterization of carbon fiber-reinforced plastic specimens for aerospace applications
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
– volume: 6
  start-page: 9548
  year: 2023
  end-page: 9557
  ident: bib160
  article-title: Supramolecular nonwoven materials via thermally induced precursor crystallization of nanocrystalline fibers/belts for recyclable air filters
  publication-title: ACS Appl Nano Mater
– volume: 3
  year: 2021
  ident: bib154
  article-title: Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications
  publication-title: Funct Compos Struct
– volume: 303
  year: 2023
  ident: bib168
  article-title: Mechanical performance and damage monitoring of CFRP thermoplastic laminates with an open hole repaired by 3D printed patches
  publication-title: Compos Struct
– volume: 22
  start-page: 316
  year: 2021
  end-page: 326
  ident: bib96
  article-title: Mechanical properties, water absorption, and failure analyses of kenaf fiber reinforced epoxy matrix composites
  publication-title: IIUM Eng J
– volume: 137
  year: 2023
  ident: bib128
  article-title: Contribution of fiber–matrix interface enhancement on flexural properties of Ultra–high–performance concrete
  publication-title: Cem Concr Compos
– volume: 22
  start-page: 1307
  year: 2023
  end-page: 1321
  ident: bib176
  article-title: Phase-field simulation of nano-α′ precipitates under irradiation and dislocations
  publication-title: J Mater Res Technol
– volume: 1
  start-page: 3851
  year: 2008
  end-page: 3856
  ident: bib85
  article-title: Carbon/Dyneema® intralaminar hybrids: new strategy to increase impact resistance or decrease mass of carbon fiber composites
  publication-title: ICAS Secr - 26th Congr Int Counc Aeronaut Sci
– volume: 72
  year: 2023
  ident: bib127
  article-title: Prediction of tensile response for ultra-high-performance concrete with a strengthen fiber/matrix interface based on the Weibull stochastic process
  publication-title: J Build Eng
– volume: 181
  year: 2019
  ident: bib43
  article-title: Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability
  publication-title: Polymer
– volume: 66
  start-page: 1953
  year: 2006
  end-page: 1962
  ident: bib62
  article-title: Flexural and interlaminar mechanical properties of unidirectional liquid crystalline single-polymer composites
  publication-title: Compos Sci Technol
– volume: 204
  year: 2021
  ident: bib36
  article-title: Interlaminar shear behavior of continuous and short carbon fiber reinforced polymer composites fabricated by additive manufacturing
  publication-title: Composites Part B
– reference: .
– volume: 6
  start-page: 640
  year: 2018
  end-page: 654
  ident: bib108
  article-title: Experimental investigation on morphological, physical and shear properties of hybrid composite laminates reinforced with flax and carbon fibers
  publication-title: J Chinese Adv Mater Soc
– start-page: 109
  year: 2018
  ident: bib144
  article-title: Sustainable bio composites for aircraft components
  publication-title: Sustain. Compos. Aerosp. Appl.
– volume: 11
  start-page: 1356
  year: 2019
  ident: bib101
  article-title: Effect of graphene oxide coating on natural fiber composite for multilayered ballistic armor
  publication-title: Polymers
– volume: 67
  start-page: 1
  year: 2017
  end-page: 47
  ident: bib40
  article-title: Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and graphene
  publication-title: Prog Polym Sci
– volume: 50
  start-page: 1632
  year: 2022
  end-page: 1636
  ident: bib10
  article-title: A review on applications of natural Fiber-Reinforced composites (NFRCs)
  publication-title: Mater Today Proc
– volume: 15
  start-page: 137
  year: 2009
  end-page: 142
  ident: bib84
  article-title: Damage detection of hybrid aramid/metal-PVB composite materials using optical fiber sensors
  publication-title: Chem Ind Chem Eng Q
– volume: 22
  year: 2020
  ident: bib44
  article-title: Enhancing the mechanical performance of glass fiber-reinforced polymer composites using multi-walled carbon nanotubes
  publication-title: Adv Eng Mater
– volume: 502
  start-page: 227
  year: 2012
  end-page: 232
  ident: bib49
  article-title: Surface treatment of PPTA fiber and properties of its composite materials
  publication-title: Adv Mater Res
– volume: 614
  year: 2022
  ident: bib162
  article-title: An integrated experimental design framework for optimizing solute transport monitoring locations in heterogeneous sedimentary media
  publication-title: J Hydrol
– volume: 14
  start-page: 355
  year: 2023
  end-page: 362
  ident: bib169
  article-title: Application of SiO2 nanocomposite ferroelectric material in preparation of trampoline net for physical exercise
  publication-title: Advances in Nano Research
– year: 2022
  ident: bib197
  article-title: Eco-friendly MoS2/waste coconut oil nanofluid for machining of magnesium implants
  publication-title: Reviews on advanced materials science
– volume: 26
  start-page: 1189
  year: 2019
  end-page: 1206
  ident: bib134
  article-title: Telescopic hydraulic cylinder made of composite material
  publication-title: Appl Compos Mater
– volume: 67
  start-page: 181
  year: 2014
  end-page: 200
  ident: bib103
  article-title: Fibre hybridisation in polymer composites: a review
  publication-title: Compos Part A Appl Sci Manuf
– volume: 12
  start-page: 1226
  year: 2019
  ident: bib88
  article-title: Effect of jute fiber modification on mechanical properties of jute fiber composite
  publication-title: Materials
– reference: Shi SQ. TENSILE properties of four types of individual cellulosic fibers jinwu wang shuangping cao haitao cheng. Wood Fiber Sci n.d.;43:353–364.
– reference: Saba N, Paridah MT, Jawaid M. Mechanical properties of kenaf fibre reinforced polymer composite: A review. Construct Build Mater 2015;76:87–96.
– start-page: 1
  year: 2014
  ident: bib145
  article-title: Method of signal transmission using fiber composite sandwich panel
– volume: 14
  start-page: 4727
  year: 2022
  ident: bib190
  article-title: A critical review on hygrothermal and sound absorption behavior of natural-fiber reinforced polymer composites
  publication-title: Polymers
– volume: 7
  start-page: 122
  year: 2021
  ident: bib137
  article-title: A review on the significance of hybrid particulate reinforcements on the mechanical and tribological properties of stir-casted aluminum metal matrix composites
  publication-title: J Bio- Tribo-Corrosion
– volume: 2
  year: 2009
  ident: bib80
  publication-title: The structure of cotton and other plant fibres
– volume: 34
  start-page: 536
  year: 2021
  end-page: 538
  ident: bib46
  article-title: Mechanical properties of polymer matrix composites: effect of hybridization
  publication-title: Mater Today Proc
– volume: 64
  start-page: 181
  year: 2019
  end-page: 215
  ident: bib104
  article-title: Recent advances in fibre-hybrid composites: materials selection, opportunities and applications
  publication-title: Int Mater Rev
– volume: 3
  start-page: 394
  year: 2014
  end-page: 398
  ident: bib114
  article-title: Processing and flexural strength of carbon fiber and glass fiber reinforced epoxy-matrix hybrid composite
  publication-title: Int J Eng Res Technol
– volume: 57
  start-page: 1107
  year: 2021
  end-page: 1125
  ident: bib173
  article-title: Current research status of interface of ceramic-metal laminated composite material for armor protection
  publication-title: Jinshu Xuebao/Acta Metallurgica Sinica
– volume: 256
  year: 2021
  ident: bib111
  article-title: Properties of multi-layered polymer composites with Vectran fi ber reinforcement
  publication-title: Compos Struct
– volume: 25
  start-page: 403
  year: 2012
  end-page: 414
  ident: bib58
  article-title: High performance Dyneema® fiber laminate for impact resistance/macro structural composites
  publication-title: J Thermoplast Compos Mater
– volume: 14
  start-page: 171
  year: 2014
  end-page: 175
  ident: bib136
  article-title: Statistical analysis of process parameters in drilling of Al/Al2O3p metal matrix composites
  publication-title: J Manuf Sci Prod
– volume: 38
  start-page: 345
  year: 2021
  end-page: 349
  ident: bib110
  article-title: Influence of different resins on Physico-Mechanical properties of hybrid fiber reinforced polymer composites used in human prosthetics
  publication-title: Mater Today Proc
– volume: 18
  start-page: 1372
  year: 2015
  end-page: 1383
  ident: bib42
  article-title: Mechanical properties of glass fiber reinforced polymers members for structural applications
  publication-title: Mater Res
– volume: 39
  start-page: 606
  year: 2021
  end-page: 609
  ident: bib98
  article-title: Evaluation of mechanical properties of bamboo fiber composite with addition of Al2O3 nano particles
  publication-title: Mater Today Proc
– volume: 7
  start-page: 1631
  year: 2021
  end-page: 1645
  ident: bib177
  article-title: Preparation and characterization of high-strength geopolymer based on BH-1 lunar soil simulant with low alkali content
  publication-title: Engineering
– volume: 1
  start-page: 90
  year: 2014
  ident: bib141
  article-title: Design of a composite engine support sub-frame to achieve lightweight vehicles
  publication-title: Int J Automot Compos
– year: 2022
  ident: bib191
  article-title: Effect of particle size and weight fraction of SiC on the mechanical, tribological, morphological, and structural properties of Al-5.6Zn-2.2Mg-1.3Cu composites using RSM: fabrication, characterization, and modelling
– volume: 15
  start-page: 8066
  year: 2022
  ident: bib198
  article-title: Improvements in the engineering properties of cementitious composites using nano-sized cement and nano-sized additives
  publication-title: Materials
– volume: 61
  start-page: 17
  year: 2017
  end-page: 26
  ident: bib60
  article-title: Escobedo JP. Impact behaviour of Dyneema® fabric-reinforced composites with different resin matrices
  publication-title: Polym Test
– volume: 174
  start-page: 125
  year: 2019
  end-page: 133
  ident: bib54
  article-title: Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings
  publication-title: Compos Sci Technol
– volume: 37
  start-page: 374
  year: 2012
  end-page: 382
  ident: bib3
  article-title: Do fiber-reinforced polymer composites provide environmentally benign alternatives? A life-cycle-assessment-based study
  publication-title: MRS Bull
– volume: 21
  start-page: 2191
  year: 2022
  end-page: 2202
  ident: bib170
  article-title: Correlating multi-scale structure characteristics to mechanical behavior of Caprinae horn sheaths
  publication-title: J Mater Res Technol
– volume: 12
  start-page: 1559
  year: 2022
  ident: bib184
  article-title: Jointing of CFRP/5083 aluminum alloy by induction brazing: processing, connecting mechanism, and fatigue performance
  publication-title: Coatings
– volume: 91
  start-page: 790
  year: 2021
  end-page: 801
  ident: bib45
  article-title: Enhanced interfacial adhesion in glass fiber fabric/epoxy composites employing fiber surface treatment with aminosilane-functionalized graphene oxide
  publication-title: Textil Res J
– volume: 12
  start-page: 902
  year: 2020
  ident: bib75
  article-title: Effect of glass fibers thermal treatment on the mechanical and thermal behavior of polysulfone based composites
  publication-title: Polymers
– volume: 8
  start-page: 380
  year: 2022
  end-page: 391
  ident: bib90
  article-title: Influence of alkali treatment on physio-mechanical properties of jute–epoxy composite
  publication-title: Adv Mater Process Technol
– volume: 10
  start-page: 397
  year: 2019
  end-page: 408
  ident: bib122
  article-title: Preparation and characterization of coffee hull fiber for reinforcing application in thermoplastic composites
  publication-title: Bioengineered
– volume: 27
  start-page: 1694
  year: 2016
  end-page: 1699
  ident: bib149
  article-title: Evaluation of the biocompatibility of new fiber-reinforced composite materials for craniofacial bone reconstruction
  publication-title: J Craniofac Surg
– volume: 86
  start-page: 1
  year: 2011
  end-page: 18
  ident: bib79
  article-title: Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review
  publication-title: Carbohydr Polym
– volume: 56
  start-page: 488
  year: 2021
  end-page: 496
  ident: bib116
  article-title: The effect of graphene oxide modified short carbon fiber on the interlaminar shear strength of carbon fiber fabric/epoxy composites
  publication-title: J Mater Sci
– volume: 61
  start-page: 1
  year: 2022
  end-page: 24
  ident: bib195
  article-title: Kuwar mausam, and elsayed mohamed tag eldin, “multi-objective parametric optimization on the EDM machining of hybrid SiCp/grp/aluminum nanocomposites using non-dominating sorting genetic algorithm (NSGA-II)
  publication-title: Fabrication and Microstructural Characterizations” Reviews on Advanced Materials Science
– volume: 2
  start-page: 149
  year: 2013
  end-page: 157
  ident: bib12
  article-title: The effect of fiber morphology on the tensile strength of natural fibers
  publication-title: J Mater Res Technol
– volume: 61
  year: 2022
  ident: bib166
  article-title: Study on mechanical properties of the interfacial transition zone in carbon nanofiber-reinforced cement mortar based on the PeakForce tapping mode of atomic force microscope
  publication-title: J Build Eng
– volume: 55
  start-page: 1823
  year: 2021
  end-page: 1834
  ident: bib56
  article-title: Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites
  publication-title: J Compos Mater
– volume: 9
  start-page: 18
  year: 2013
  end-page: 22
  ident: bib158
  article-title: Investigation of tribological behavior of stainless steel 304 and grey cast iron rotating against EN32 steel using pin on disc apparatus
  publication-title: IOSR J Mech Civ Eng
– volume: 10
  start-page: 27
  year: 2022
  ident: bib4
  article-title: A review of fibre reinforced polymer structures
  publication-title: Fibers
– volume: 32
  start-page: 661
  year: 2009
  end-page: 671
  ident: bib81
  article-title: Applications of lignocellulosic fibers in polymer chemistry and in composites
  publication-title: Quim Nova
– year: 2018
  ident: bib34
  publication-title: Compos Part B
– volume: 15
  start-page: 39
  year: 2021
  ident: bib182
  article-title: Property assessment of high-performance concrete containing three types of fibers
  publication-title: International Journal of Concrete Structures and Materials
– start-page: 39
  year: 2017
  end-page: 72
  ident: bib20
  article-title: Natural fiber and hybrid fiber thermoplastic composites
– start-page: 249
  year: 2014
  end-page: 283
  ident: bib21
  article-title: Eco-friendly bio-composites using natural rubber (NR) matrices and natural fiber reinforcements
  publication-title: Chem. Manuf. Appl. Nat. Rubber
– volume: 8
  year: 2015
  ident: bib120
  article-title: Development of high strength natural fibre based composite plates for potential application in retrofitting of RC structure
  publication-title: Indian J Sci Technol
– volume: 33
  start-page: 1258
  year: 2014
  end-page: 1275
  ident: bib83
  article-title: Glass fiber-reinforced polymer composites - a review
  publication-title: J Reinforc Plast Compos
– volume: 2013
  start-page: 1
  year: 2013
  end-page: 9
  ident: bib31
  article-title: Study in physical and mechanical properties of hemp fibres
  publication-title: Adv Mater Sci Eng
– volume: 29
  start-page: 253
  year: 2020
  end-page: 264
  ident: bib57
  article-title: Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties
  publication-title: Iran Polym J (Engl Ed)
– volume: 34
  start-page: 546
  year: 2021
  end-page: 549
  ident: bib87
  article-title: Effect of chemical treatment on impact strength and dynamic thermal properties of Jute/PLA composites
  publication-title: Mater Today Proc
– volume: 18
  start-page: 694
  year: 2021
  end-page: 704
  ident: bib109
  article-title: Mechanical performance of jute and basalt fiber geo-grid-reinforced epoxy hybrid composite material
  publication-title: J Nat Fibers
– volume: 8
  start-page: 6354
  year: 2019
  end-page: 6374
  ident: bib24
  article-title: Recent progress of reinforcement materials: a comprehensive overview of composite materials
  publication-title: J Mater Res Technol
– volume: 103
  start-page: 1
  year: 2019
  end-page: 10
  ident: bib126
  article-title: Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix
  publication-title: Cem Concr Compos
– volume: 213
  year: 2021
  ident: bib97
  article-title: Wetting mechanism and interfacial bonding performance of bamboo fiber reinforced epoxy resin composites
  publication-title: Compos Sci Technol
– volume: 83
  start-page: 98
  year: 2016
  end-page: 112
  ident: bib13
  article-title: A review of recent developments in natural fibre composites and their mechanical performance
  publication-title: Compos Part A Appl Sci Manuf
– volume: 105
  start-page: 60
  year: 2016
  end-page: 66
  ident: bib139
  article-title: Mechanical and damping properties of resin transfer moulded jute-carbon hybrid composites
  publication-title: Composites Part B
– volume: 27
  start-page: 2249
  year: 2020
  end-page: 2253
  ident: bib92
  article-title: Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating SiC and Al2O3
  publication-title: Mater Today Proc
– volume: 71
  start-page: 1791
  year: 2011
  end-page: 1803
  ident: bib147
  article-title: The use of composite materials in modern orthopaedic medicine and prosthetic devices: a review
  publication-title: Compos Sci Technol
– volume: 200
  year: 2021
  ident: bib38
  article-title: Grafting of a novel hyperbranched polymer onto carbon fi ber for interfacial enhancement of carbon fi ber reinforced epoxy composites
  publication-title: Mater Des
– volume: 31
  start-page: 371
  year: 2015
  end-page: 381
  ident: bib148
  article-title: Fiber glass–bioactive glass composite for bone replacing and bone anchoring implants
  publication-title: Dent Mater
– volume: 46
  start-page: 2141
  year: 2021
  end-page: 2145
  ident: bib156
  article-title: Wear analysis of friction stir processed aluminum composite reinforced by boron carbide
  publication-title: Mater Today Proc
– volume: 82
  start-page: 141
  year: 2016
  end-page: 150
  ident: bib117
  article-title: Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding
  publication-title: Compos Part A Appl Sci Manuf
– volume: 8
  year: 2017
  ident: bib6
  article-title: River plastic emissions to the world's oceans
  publication-title: Nat Commun
– volume: 110
  start-page: 1695
  year: 2019
  end-page: 1702
  ident: bib86
  article-title: Lengthwise jute fibre properties variation and its effect on jute–polyester composite
  publication-title: J Text Inst
– volume: 18
  year: 2023
  ident: bib189
  article-title: Impact behavior of nylon kernmantle ropes for high-altitude fall protection
  publication-title: Journal of Engineered Fibers and Fabrics
– volume: 9
  start-page: 13390
  year: 2020
  end-page: 13401
  ident: bib99
  article-title: Mechanical properties of composites with graphene oxide functionalization of either epoxy matrix or curaua fiber reinforcement
  publication-title: J Mater Res Technol
– volume: 233
  year: 2022
  ident: bib2
  article-title: Recent advances of interphases in carbon fiber-reinforced polymer composites: a review
  publication-title: Composites Part B
– volume: 265
  year: 2021
  ident: bib66
  article-title: The impact performance of Vectran/Epoxy composite laminates with a novel non-crimp fabric architecture
  publication-title: Compos Struct
– year: 2023
  ident: bib193
  article-title: Heat treatment behavior of Cr in the form of collagen powder and Al2O3 reinforced aluminum-based composite material
  publication-title: J Mater Res Technol
– volume: 13
  start-page: 1897
  year: 2021
  ident: bib100
  article-title: Dynamic mechanical behavior of graphene oxide functionalized curaua fiber-reinforced epoxy composites: a brief report
  publication-title: Polymers
– volume: 161
  start-page: 92
  year: 2018
  end-page: 99
  ident: bib69
  article-title: Aramid nanofibers for multiscale fiber reinforcement of polymer composites
  publication-title: Compos Sci Technol
– volume: 5
  start-page: 28354
  year: 2018
  end-page: 28363
  ident: bib155
  article-title: A study of vibration and wear resistance of friction stir processed metal matrix composite
  publication-title: Mater Today Proc
– volume: 42
  start-page: 2396
  year: 2021
  end-page: 2407
  ident: bib14
  article-title: Effect of silica nanoparticles on physical, mechanical, and wear properties of natural fiber reinforced polymer composites
  publication-title: Polym Compos
– volume: 11
  start-page: 4432
  year: 2016
  end-page: 4445
  ident: bib123
  article-title: Palm leaf fiber treatment
  publication-title: Bioresources
– volume: 41
  start-page: 833
  year: 2021
  end-page: 837
  ident: bib112
  article-title: Mode-I fracture toughness of glass/carbon fiber reinforced epoxy matrix polymer composite
  publication-title: Mater Today Proc
– start-page: 1
  year: 2009
  end-page: 10
  ident: bib82
  article-title: Tensile and flexural properties of single carbon fibres." In
  publication-title: Int Comm Compos Mater
– volume: 1
  start-page: 23
  year: 2005
  end-page: 65
  ident: bib11
  article-title: A review on natural fibre-based composites—Part II
  publication-title: J Nat Fibers
– volume: 13
  start-page: 1638
  year: 2021
  ident: bib93
  article-title: Interface modification, water absorption behaviour and mechanical properties of injection moulded short hemp fiber-reinforced thermoplastic composites
  publication-title: Polymers
– volume: 162
  start-page: 331
  year: 2019
  end-page: 343
  ident: bib135
  article-title: Multifunctional application of carbon fiber reinforced polymer composites: electrical properties of the reinforcing carbon fibers – a short review
  publication-title: Composites Part B
– volume: 59
  start-page: 175
  year: 2005
  ident: 10.1016/j.jmrt.2023.08.036_bib76
  article-title: Friction and wear properties of UHMWPE composites reinforced with carbon fiber
  publication-title: Mater Lett
  doi: 10.1016/j.matlet.2004.09.011
– volume: 7
  start-page: 122
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib137
  article-title: A review on the significance of hybrid particulate reinforcements on the mechanical and tribological properties of stir-casted aluminum metal matrix composites
  publication-title: J Bio- Tribo-Corrosion
  doi: 10.1007/s40735-021-00558-9
– volume: 22
  issue: 10
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib159
  article-title: Numerical investigation of brittleness effect on strength and microcracking behavior of crystalline rock
  publication-title: Int J GeoMech
  doi: 10.1061/(ASCE)GM.1943-5622.0002529
– volume: 91
  start-page: 790
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib45
  article-title: Enhanced interfacial adhesion in glass fiber fabric/epoxy composites employing fiber surface treatment with aminosilane-functionalized graphene oxide
  publication-title: Textil Res J
  doi: 10.1177/0040517520960749
– volume: 12
  issue: 12
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib179
  article-title: Study on the annealing phase transformation mechanism and electrochemical properties of carbon submicron fibers loaded with cobalt
  publication-title: Materials Express
  doi: 10.1166/mex.2022.2302
– volume: 233
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib2
  article-title: Recent advances of interphases in carbon fiber-reinforced polymer composites: a review
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2022.109639
– volume: 67
  start-page: 181
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib103
  article-title: Fibre hybridisation in polymer composites: a review
  publication-title: Compos Part A Appl Sci Manuf
  doi: 10.1016/j.compositesa.2014.08.027
– volume: 206
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib165
  article-title: Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy
  publication-title: Vacuum
  doi: 10.1016/j.vacuum.2022.111532
– volume: 14
  start-page: 355
  issue: 4
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib169
  article-title: Application of SiO2 nanocomposite ferroelectric material in preparation of trampoline net for physical exercise
  publication-title: Advances in Nano Research
– volume: 67
  start-page: 1
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib40
  article-title: Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and graphene
  publication-title: Prog Polym Sci
  doi: 10.1016/j.progpolymsci.2016.12.010
– volume: 71
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib181
  article-title: Experimental study of a composite beam externally bonded with a carbon fiber-reinforced plastic plate
  publication-title: J Build Eng
– year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib199
  article-title: Prediction and simulation of mechanical properties of Borophene reinforced Epoxy Nanocomposites using Molecular Dynamics and FEA analysis
  publication-title: Rev Adv Mater Sci
  doi: 10.1515/rams-2022-0322
– start-page: 39
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib20
– volume: 46
  start-page: 2141
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib156
  article-title: Wear analysis of friction stir processed aluminum composite reinforced by boron carbide
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2021.02.468
– volume: 39
  start-page: 606
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib98
  article-title: Evaluation of mechanical properties of bamboo fiber composite with addition of Al2O3 nano particles
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2020.08.613
– volume: 213
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib97
  article-title: Wetting mechanism and interfacial bonding performance of bamboo fiber reinforced epoxy resin composites
  publication-title: Compos Sci Technol
  doi: 10.1016/j.compscitech.2021.108951
– volume: 143
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib140
  article-title: Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles
  publication-title: Thin-Walled Struct
  doi: 10.1016/j.tws.2019.106232
– volume: 154
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib186
  article-title: Comparison of toughening mechanisms in natural silk-reinforced composites with three epoxy resin matrices
  publication-title: Compos Appl Sci Manuf
  doi: 10.1016/j.compositesa.2021.106760
– volume: 424
  issue: Pt C
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib161
  article-title: Radionuclide transport in multi-scale fractured rocks: a review
  publication-title: J Hazard Mater
– volume: 210
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib37
  article-title: Improving cryogenic mechanical properties of carbon fiber reinforced composites based on epoxy resin toughened by hydroxyl-terminated polyurethane
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2020.108569
– volume: 256
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib111
  article-title: Properties of multi-layered polymer composites with Vectran fi ber reinforcement
  publication-title: Compos Struct
  doi: 10.1016/j.compstruct.2020.113045
– volume: 61
  start-page: 1437
  year: 2001
  ident: 10.1016/j.jmrt.2023.08.036_bib124
  article-title: The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
  publication-title: Compos Sci Technol
  doi: 10.1016/S0266-3538(01)00046-X
– volume: 11
  start-page: 1356
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib101
  article-title: Effect of graphene oxide coating on natural fiber composite for multilayered ballistic armor
  publication-title: Polymers
  doi: 10.3390/polym11081356
– volume: 28
  start-page: 1255
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib67
  article-title: A plane-stress damage model for vectran laminated composite
  publication-title: Appl Compos Mater
  doi: 10.1007/s10443-021-09888-w
– volume: 61
  start-page: 17
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib60
  article-title: Escobedo JP. Impact behaviour of Dyneema® fabric-reinforced composites with different resin matrices
  publication-title: Polym Test
  doi: 10.1016/j.polymertesting.2017.04.026
– volume: 510–511
  start-page: 443
  year: 2012
  ident: 10.1016/j.jmrt.2023.08.036_bib52
  article-title: SEM examination and analysis of the interface character in surface modified aramid-epoxy composite
  publication-title: Key Eng Mater
  doi: 10.4028/www.scientific.net/KEM.510-511.443
– volume: 224
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib163
  article-title: Plutonium reactive transport in fractured granite: multi-species experiments and simulations
  publication-title: Water Res
  doi: 10.1016/j.watres.2022.119068
– volume: 502
  start-page: 227
  year: 2012
  ident: 10.1016/j.jmrt.2023.08.036_bib49
  article-title: Surface treatment of PPTA fiber and properties of its composite materials
  publication-title: Adv Mater Res
  doi: 10.4028/www.scientific.net/AMR.502.227
– volume: 42
  start-page: 2396
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib14
  article-title: Effect of silica nanoparticles on physical, mechanical, and wear properties of natural fiber reinforced polymer composites
  publication-title: Polym Compos
  doi: 10.1002/pc.25986
– volume: 347
  start-page: 483
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib47
  article-title: Aramid fiber with excellent interfacial properties suitable for resin composite in a wide polarity range
  publication-title: Chem Eng J
  doi: 10.1016/j.cej.2018.04.149
– volume: 22
  start-page: 316
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib96
  article-title: Mechanical properties, water absorption, and failure analyses of kenaf fiber reinforced epoxy matrix composites
  publication-title: IIUM Eng J
  doi: 10.31436/iiumej.v22i2.1747
– volume: 18
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib189
  article-title: Impact behavior of nylon kernmantle ropes for high-altitude fall protection
  publication-title: Journal of Engineered Fibers and Fabrics
  doi: 10.1177/15589250231167401
– volume: 258
  start-page: 458
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib48
  article-title: Surface modification of aramid fibres by graphene oxide nano-sheets for multiscale polymer composites
  publication-title: Surf Coating Technol
  doi: 10.1016/j.surfcoat.2014.08.054
– volume: 82
  start-page: 141
  year: 2016
  ident: 10.1016/j.jmrt.2023.08.036_bib117
  article-title: Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding
  publication-title: Compos Part A Appl Sci Manuf
  doi: 10.1016/j.compositesa.2015.12.008
– volume: 53
  start-page: 1290
  year: 2004
  ident: 10.1016/j.jmrt.2023.08.036_bib16
  article-title: Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties
  publication-title: Polym Int
  doi: 10.1002/pi.1514
– volume: 157
  start-page: 98
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib178
  article-title: High-entropy ferroelastic (10RE0.1)TaO4 ceramics with oxygen vacancies and improved thermophysical properties
  publication-title: J Mater Sci Technol
  doi: 10.1016/j.jmst.2022.12.027
– volume: 103
  start-page: 1
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib126
  article-title: Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix
  publication-title: Cem Concr Compos
  doi: 10.1016/j.cemconcomp.2019.04.025
– volume: 33
  start-page: 1258
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib83
  article-title: Glass fiber-reinforced polymer composites - a review
  publication-title: J Reinforc Plast Compos
  doi: 10.1177/0731684414530790
– volume: 265
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib66
  article-title: The impact performance of Vectran/Epoxy composite laminates with a novel non-crimp fabric architecture
  publication-title: Compos Struct
  doi: 10.1016/j.compstruct.2021.113784
– volume: 4
  start-page: 1139
  year: 2010
  ident: 10.1016/j.jmrt.2023.08.036_bib102
  article-title: Influence of Ti4+ doping on hyperfine field parameters of Mg0.95Mn0.05Fe2−2x Ti2x O4 (0⩽x⩽0.7)
  publication-title: J Cent South Univ Technol
– start-page: 387
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib143
  article-title: Mechanical characterization of carbon fiber-reinforced plastic specimens for aerospace applications
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
  doi: 10.1016/B978-0-08-102292-4.00019-9
– start-page: 123
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib25
  article-title: Compressive and fracture toughness of natural and synthetic fiber-reinforced polymer
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
  doi: 10.1016/B978-0-08-102292-4.00007-2
– start-page: 87
  year: 1980
  ident: 10.1016/j.jmrt.2023.08.036_bib1
  article-title: Metall. Weld
– volume: 8
  year: 2015
  ident: 10.1016/j.jmrt.2023.08.036_bib120
  article-title: Development of high strength natural fibre based composite plates for potential application in retrofitting of RC structure
  publication-title: Indian J Sci Technol
  doi: 10.17485/ijst/2015/v8i30/72172
– volume: 38
  start-page: 345
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib110
  article-title: Influence of different resins on Physico-Mechanical properties of hybrid fiber reinforced polymer composites used in human prosthetics
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2020.07.420
– volume: 614
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib162
  article-title: An integrated experimental design framework for optimizing solute transport monitoring locations in heterogeneous sedimentary media
  publication-title: J Hydrol
  doi: 10.1016/j.jhydrol.2022.128541
– volume: 217
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib68
  article-title: Impact resistance and interlaminar shear strength enhancement of carbon fiber reinforced thermoplastic composites by introducing MWCNT-anchored carbon fiber
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2021.108872
– volume: 110
  start-page: 1695
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib86
  article-title: Lengthwise jute fibre properties variation and its effect on jute–polyester composite
  publication-title: J Text Inst
  doi: 10.1080/00405000.2019.1613735
– volume: 2017
  start-page: 1
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib30
  article-title: Thermomechanical properties of jute/bamboo cellulose composite and its hybrid composites: the effects of treatment and fiber loading
  publication-title: Adv Mater Sci Eng
  doi: 10.1155/2017/8630749
– volume: 8
  start-page: 380
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib90
  article-title: Influence of alkali treatment on physio-mechanical properties of jute–epoxy composite
  publication-title: Adv Mater Process Technol
– volume: 10
  start-page: 397
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib122
  article-title: Preparation and characterization of coffee hull fiber for reinforcing application in thermoplastic composites
  publication-title: Bioengineered
  doi: 10.1080/21655979.2019.1661694
– volume: 66
  start-page: 1953
  year: 2006
  ident: 10.1016/j.jmrt.2023.08.036_bib62
  article-title: Flexural and interlaminar mechanical properties of unidirectional liquid crystalline single-polymer composites
  publication-title: Compos Sci Technol
  doi: 10.1016/j.compscitech.2006.01.015
– volume: 21
  start-page: 546
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib175
  article-title: Co-precipitated Ni/Mn shell coated nano Cu-rich core structure: a phase-field study
  publication-title: Journal of Materials Research echnology
– volume: 32
  start-page: 661
  year: 2009
  ident: 10.1016/j.jmrt.2023.08.036_bib81
  article-title: Applications of lignocellulosic fibers in polymer chemistry and in composites
  publication-title: Quim Nova
  doi: 10.1590/S0100-40422009000300010
– volume: 112
  start-page: 315
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib7
  article-title: Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves
  publication-title: Compos Part A Appl Sci Manuf
  doi: 10.1016/j.compositesa.2018.06.024
– volume: 26
  start-page: 1228
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib94
  article-title: Influence of epoxy resin treatment on the mechanical and tribological properties of hemp-fiber-reinforced plant-derived polyamide 1010 biomass composites
  publication-title: Molecules
  doi: 10.3390/molecules26051228
– volume: 58
  start-page: 100
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib29
  article-title: Investigation on recent research of mechanical properties of natural fiber reinforced composites (NFRP) materials
  publication-title: Mater Plast
  doi: 10.37358/MP.21.2.5482
– volume: 233
  start-page: 951
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib61
  article-title: Comparison of impact behaviour of glass, carbon and Dyneema composites
  publication-title: Proc Inst Mech Eng Part C J Mech Eng Sci
  doi: 10.1177/0954406218764509
– volume: 6
  start-page: 9548
  issue: 11
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib160
  article-title: Supramolecular nonwoven materials via thermally induced precursor crystallization of nanocrystalline fibers/belts for recyclable air filters
  publication-title: ACS Appl Nano Mater
  doi: 10.1021/acsanm.3c01254
– start-page: 81
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib23
  article-title: Tensile properties of natural and synthetic fiber-reinforced polymer composites
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
  doi: 10.1016/B978-0-08-102292-4.00005-9
– volume: 13
  start-page: 3260
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib152
  article-title: Assessment of dimensional stability, biodegradability, and fracture energy of bio-composites reinforced with novel pine cone
  publication-title: Polymers
  doi: 10.3390/polym13193260
– volume: 61
  start-page: 294
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib133
  article-title: High volume composites for the automotive challenge
  publication-title: Reinforc Plast
  doi: 10.1016/j.repl.2017.03.005
– volume: 55
  start-page: 626
  year: 2016
  ident: 10.1016/j.jmrt.2023.08.036_bib19
  article-title: Mechanical properties of hybrid fibers-reinforced polymer composite: a review
  publication-title: Polym Plast Technol Eng
  doi: 10.1080/03602559.2015.1098694
– volume: 15
  start-page: 39
  issue: 1
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib182
  article-title: Property assessment of high-performance concrete containing three types of fibers
  publication-title: International Journal of Concrete Structures and Materials
  doi: 10.1186/s40069-021-00476-7
– start-page: 3
  year: 2013
  ident: 10.1016/j.jmrt.2023.08.036_bib131
  article-title: Introduction of fibre-reinforced polymers − polymers and composites: concepts, properties and processes
  publication-title: Fiber reinf. Polym. - technol. Appl. Concr. Repair
– volume: 200
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib38
  article-title: Grafting of a novel hyperbranched polymer onto carbon fi ber for interfacial enhancement of carbon fi ber reinforced epoxy composites
  publication-title: Mater Des
  doi: 10.1016/j.matdes.2021.109456
– volume: 6
  start-page: 4
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib28
  article-title: Preparation and mechanical properties of jute fiber reinforced epoxy composites
  publication-title: Ind Eng Manag
  doi: 10.4172/2169-0316.1000234
– volume: 137
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib128
  article-title: Contribution of fiber–matrix interface enhancement on flexural properties of Ultra–high–performance concrete
  publication-title: Cem Concr Compos
  doi: 10.1016/j.cemconcomp.2022.104926
– volume: 61
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib166
  article-title: Study on mechanical properties of the interfacial transition zone in carbon nanofiber-reinforced cement mortar based on the PeakForce tapping mode of atomic force microscope
  publication-title: J Build Eng
– volume: 6
  start-page: 547
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib27
  article-title: Polymer matrix composite with natural and synthetic fibres
  publication-title: Adv Mater Process Technol
– volume: 21
  start-page: 4138
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib171
  article-title: Microstructure and properties of graphene nanoplatelets reinforced AZ91D matrix composites prepared by electromagnetic stirring casting
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2022.11.033
– volume: 62
  start-page: 714
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib105
  article-title: Experimental investigation on hybrid fibre reinforced polymer epoxy LY556 composites by vacuum bag molding
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2022.03.655
– volume: 1
  start-page: 90
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib141
  article-title: Design of a composite engine support sub-frame to achieve lightweight vehicles
  publication-title: Int J Automot Compos
  doi: 10.1504/IJAUTOC.2014.064129
– start-page: 1
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib145
– volume: 3
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib154
  article-title: Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications
  publication-title: Funct Compos Struct
  doi: 10.1088/2631-6331/ac376e
– volume: 15
  start-page: 8066
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib198
  article-title: Improvements in the engineering properties of cementitious composites using nano-sized cement and nano-sized additives
  publication-title: Materials
  doi: 10.3390/ma15228066
– volume: 20
  start-page: 720
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib150
  article-title: Neutrosophic entropy-based ingenious measurement for fast fourier transforms based classification of process-parameters and wear resistance of friction-stir processed hybrid AA7075- B4C aluminium metal-matrix composites
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2022.07.026
– volume: 3
  start-page: 394
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib114
  article-title: Processing and flexural strength of carbon fiber and glass fiber reinforced epoxy-matrix hybrid composite
  publication-title: Int J Eng Res Technol
– start-page: 109
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib144
  article-title: Sustainable bio composites for aircraft components
  publication-title: Sustain. Compos. Aerosp. Appl.
– volume: 34
  start-page: 536
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib46
  article-title: Mechanical properties of polymer matrix composites: effect of hybridization
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2020.03.108
– volume: 56
  start-page: 488
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib116
  article-title: The effect of graphene oxide modified short carbon fiber on the interlaminar shear strength of carbon fiber fabric/epoxy composites
  publication-title: J Mater Sci
  doi: 10.1007/s10853-020-05286-y
– volume: 181
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib43
  article-title: Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability
  publication-title: Polymer
  doi: 10.1016/j.polymer.2019.121803
– volume: 9
  start-page: 11167
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib70
  article-title: Isolation of aramid nanofibers for high strength and toughness polymer nanocomposites
  publication-title: ACS Appl Mater Interfaces
  doi: 10.1021/acsami.7b01488
– volume: 61
  start-page: 1
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib195
  article-title: Kuwar mausam, and elsayed mohamed tag eldin, “multi-objective parametric optimization on the EDM machining of hybrid SiCp/grp/aluminum nanocomposites using non-dominating sorting genetic algorithm (NSGA-II)
  publication-title: Fabrication and Microstructural Characterizations” Reviews on Advanced Materials Science
– volume: 55
  start-page: 1823
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib56
  article-title: Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites
  publication-title: J Compos Mater
  doi: 10.1177/0021998320962845
– year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib194
  article-title: Study on the physicomechanical, fracturedeformation, interface-adhesion, and water-absorption properties of twill fabric cotton-bamboo/epoxy composites
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2023.05.102
– start-page: 249
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib21
  article-title: Eco-friendly bio-composites using natural rubber (NR) matrices and natural fiber reinforcements
  publication-title: Chem. Manuf. Appl. Nat. Rubber
– volume: 64
  start-page: 181
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib104
  article-title: Recent advances in fibre-hybrid composites: materials selection, opportunities and applications
  publication-title: Int Mater Rev
  doi: 10.1080/09506608.2018.1467365
– volume: 51
  start-page: 2642S
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib151
  article-title: Effect of hybridization on physio-mechanical behavior of Vetiver and Jute fibers reinforced epoxy composites for structural applications: studies on fabrication, physicomechanical, water-absorption, and morphological properties
  publication-title: J Ind Text
  doi: 10.1177/15280837221098573
– volume: 426–427
  start-page: 1033
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib132
  article-title: The wear resistance improvement of fibre reinforced polymer composite gears
  publication-title: Wear
  doi: 10.1016/j.wear.2018.12.043
– volume: 486
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib187
  article-title: Functional metal/covalent organic framework materials for triboelectric nanogenerator
  publication-title: Coord Chem Rev
  doi: 10.1016/j.ccr.2023.215118
– volume: 13
  start-page: 3859
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib17
  article-title: Thermal and flame retardant behavior of neem and banyan fibers when reinforced with a bran particulate epoxy hybrid composite
  publication-title: Polymers
  doi: 10.3390/polym13223859
– volume: 56
  start-page: 15733
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib8
  article-title: Degradable bio-based epoxy vitrimers based on imine chemistry and their application in recyclable carbon fiber composites
  publication-title: J Mater Sci
  doi: 10.1007/s10853-021-06291-5
– volume: 11
  start-page: 4432
  year: 2016
  ident: 10.1016/j.jmrt.2023.08.036_bib123
  article-title: Palm leaf fiber treatment
  publication-title: Bioresources
– volume: 71
  start-page: 1791
  year: 2011
  ident: 10.1016/j.jmrt.2023.08.036_bib147
  article-title: The use of composite materials in modern orthopaedic medicine and prosthetic devices: a review
  publication-title: Compos Sci Technol
  doi: 10.1016/j.compscitech.2011.08.017
– volume: 7
  start-page: 1631
  issue: 11
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib177
  article-title: Preparation and characterization of high-strength geopolymer based on BH-1 lunar soil simulant with low alkali content
  publication-title: Engineering
  doi: 10.1016/j.eng.2020.10.016
– volume: 18
  start-page: 1372
  year: 2015
  ident: 10.1016/j.jmrt.2023.08.036_bib42
  article-title: Mechanical properties of glass fiber reinforced polymers members for structural applications
  publication-title: Mater Res
  doi: 10.1590/1516-1439.044615
– volume: 184
  start-page: 800
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib51
  article-title: Structural design and test of automobile bonnet with natural flax composite through impact damage analysis
  publication-title: Compos Struct
  doi: 10.1016/j.compstruct.2017.10.068
– volume: 12
  start-page: 1559
  issue: 10
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib184
  article-title: Jointing of CFRP/5083 aluminum alloy by induction brazing: processing, connecting mechanism, and fatigue performance
  publication-title: Coatings
  doi: 10.3390/coatings12101559
– volume: 164
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib185
  article-title: Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones
  publication-title: Corrosion Sci
  doi: 10.1016/j.corsci.2019.108337
– volume: 48
  start-page: 185
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib146
  article-title: The influence of zirconia fibre on ablative composite materials
  publication-title: Plast, Rubber Compos
  doi: 10.1080/14658011.2019.1585099
– volume: 15
  start-page: 137
  year: 2009
  ident: 10.1016/j.jmrt.2023.08.036_bib84
  article-title: Damage detection of hybrid aramid/metal-PVB composite materials using optical fiber sensors
  publication-title: Chem Ind Chem Eng Q
  doi: 10.2298/CICEQ0903137K
– volume: 162
  start-page: 331
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib135
  article-title: Multifunctional application of carbon fiber reinforced polymer composites: electrical properties of the reinforcing carbon fibers – a short review
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2018.10.098
– start-page: 103
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib26
  article-title: Mechanical behavior of carbon/natural fiber-based hybrid composites
  publication-title: Mech. Phys. Test. Biocomposites, fibre-reinforced compos. Hybrid compos.
  doi: 10.1016/B978-0-08-102292-4.00006-0
– volume: 12
  start-page: 1226
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib88
  article-title: Effect of jute fiber modification on mechanical properties of jute fiber composite
  publication-title: Materials
  doi: 10.3390/ma12081226
– volume: 83
  start-page: 98
  year: 2016
  ident: 10.1016/j.jmrt.2023.08.036_bib13
  article-title: A review of recent developments in natural fibre composites and their mechanical performance
  publication-title: Compos Part A Appl Sci Manuf
  doi: 10.1016/j.compositesa.2015.08.038
– volume: 204
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib36
  article-title: Interlaminar shear behavior of continuous and short carbon fiber reinforced polymer composites fabricated by additive manufacturing
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2020.108460
– volume: 28
  year: 2015
  ident: 10.1016/j.jmrt.2023.08.036_bib59
  article-title: Characterization of the mechanical behavior of a polymer-based laminate and constituent fibers at various quasi-static strain rates
  publication-title: J Aero Eng
– volume: 27
  start-page: 2474
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib129
  article-title: A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2019.09.221
– volume: 232
  start-page: 28
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib138
  article-title: Design and manufacturing of a hybrid flax/carbon fiber composite bicycle frame
  publication-title: Proc Inst Mech Eng P J Sports Eng Technol
– volume: 8
  start-page: 6354
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib24
  article-title: Recent progress of reinforcement materials: a comprehensive overview of composite materials
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2019.09.068
– volume: 23
  start-page: 1130
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib174
  article-title: Effects of Al and La elements on mechanical properties of CoNiFe0.6Cr0.6 high-entropy alloys: a first-principles study
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2023.01.057
– volume: 2
  year: 2009
  ident: 10.1016/j.jmrt.2023.08.036_bib80
– start-page: 1
  year: 2009
  ident: 10.1016/j.jmrt.2023.08.036_bib82
  article-title: Tensile and flexural properties of single carbon fibres." In ICCM-17-17th International Conference on Composite Materials
  publication-title: Int Comm Compos Mater
– volume: 86
  start-page: 1
  year: 2011
  ident: 10.1016/j.jmrt.2023.08.036_bib79
  article-title: Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review
  publication-title: Carbohydr Polym
  doi: 10.1016/j.carbpol.2011.04.043
– volume: 57
  start-page: 1107
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib173
  article-title: Current research status of interface of ceramic-metal laminated composite material for armor protection
  publication-title: Jinshu Xuebao/Acta Metallurgica Sinica
– volume: 387
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib188
  article-title: High-Efficiency utilization of waste shield slurry: a geopolymeric Flocculation-Filtration-Solidification method
  publication-title: Construct Build Mater
  doi: 10.1016/j.conbuildmat.2023.131569
– volume: 33
  start-page: 183
  year: 2011
  ident: 10.1016/j.jmrt.2023.08.036_bib78
  article-title: Nano-SiO2 filled rice husk/polypropylene composites: physico-mechanical properties
  publication-title: Ind Crops Prod
  doi: 10.1016/j.indcrop.2010.10.010
– volume: 13
  start-page: 1897
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib100
  article-title: Dynamic mechanical behavior of graphene oxide functionalized curaua fiber-reinforced epoxy composites: a brief report
  publication-title: Polymers
  doi: 10.3390/polym13111897
– volume: 33
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib164
  article-title: Molecular dynamics simulation and experimental study of tin growth in SAC lead-free microsolder joints under thermo-mechanical-electrical coupling
  publication-title: Mater Today Commun
– volume: 66
  start-page: 1970
  year: 2006
  ident: 10.1016/j.jmrt.2023.08.036_bib63
  article-title: Preparation and tensile mechanical properties of unidirectional liquid crystalline single-polymer composites
  publication-title: Compos Sci Technol
  doi: 10.1016/j.compscitech.2006.01.012
– volume: 35
  start-page: 837
  year: 2010
  ident: 10.1016/j.jmrt.2023.08.036_bib39
  article-title: Polymer nanocomposites based on functionalized carbon nanotubes
  publication-title: Prog Polym Sci
  doi: 10.1016/j.progpolymsci.2010.03.002
– volume: 14
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib196
  article-title: Studies on the utilization of marble dust, bagasse ash, and paddy straw wastes to improve the mechanical characteristics of unfired soil blocks
  publication-title: Sustainability
  doi: 10.3390/su142114522
– volume: 29
  start-page: 253
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib57
  article-title: Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties
  publication-title: Iran Polym J (Engl Ed)
  doi: 10.1007/s13726-020-00790-z
– volume: 25
  start-page: 403
  year: 2012
  ident: 10.1016/j.jmrt.2023.08.036_bib58
  article-title: High performance Dyneema® fiber laminate for impact resistance/macro structural composites
  publication-title: J Thermoplast Compos Mater
  doi: 10.1177/0892705711411339
– volume: 384
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib180
  article-title: Fresh, mechanical and microstructural properties of alkali-activated composites incorporating nanomaterials: a comprehensive review
  publication-title: J Clean Prod
  doi: 10.1016/j.jclepro.2022.135390
– year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib34
  publication-title: Compos Part B
– volume: 13
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib95
  article-title: The effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites
  publication-title: Polymers
  doi: 10.3390/polym13122005
– volume: 22
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib44
  article-title: Enhancing the mechanical performance of glass fiber-reinforced polymer composites using multi-walled carbon nanotubes
  publication-title: Adv Eng Mater
  doi: 10.1002/adem.202000318
– volume: 42
  start-page: 856
  year: 2011
  ident: 10.1016/j.jmrt.2023.08.036_bib53
  article-title: A review on the tensile properties of natural fiber reinforced polymer composites
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2011.01.010
– volume: 105
  start-page: 60
  year: 2016
  ident: 10.1016/j.jmrt.2023.08.036_bib139
  article-title: Mechanical and damping properties of resin transfer moulded jute-carbon hybrid composites
  publication-title: Composites Part B
  doi: 10.1016/j.compositesb.2016.08.019
– volume: 33
  start-page: 454
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib18
  article-title: Hybrid fiber reinforced polymer composites - a review
  publication-title: J Reinforc Plast Compos
  doi: 10.1177/0731684413516393
– volume: 14
  start-page: 4727
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib190
  article-title: A critical review on hygrothermal and sound absorption behavior of natural-fiber reinforced polymer composites
  publication-title: Polymers
  doi: 10.3390/polym14214727
– volume: 13
  start-page: 1638
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib93
  article-title: Interface modification, water absorption behaviour and mechanical properties of injection moulded short hemp fiber-reinforced thermoplastic composites
  publication-title: Polymers
  doi: 10.3390/polym13101638
– year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib193
  article-title: Heat treatment behavior of Cr in the form of collagen powder and Al2O3 reinforced aluminum-based composite material
  publication-title: J Mater Res Technol
  doi: 10.1007/978-3-031-39481-2
– volume: 6
  start-page: 640
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib108
  article-title: Experimental investigation on morphological, physical and shear properties of hybrid composite laminates reinforced with flax and carbon fibers
  publication-title: J Chinese Adv Mater Soc
  doi: 10.1080/22243682.2018.1534609
– volume: 50
  start-page: 1632
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib10
  article-title: A review on applications of natural Fiber-Reinforced composites (NFRCs)
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2021.09.131
– volume: 2018
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib142
  article-title: Investigation of mechanical and tribological behavior of composite material filled with black epoxy resin and aluminium tri-hydroxide using reinforcement of glass fiber
  publication-title: AIP Conf Proc
  doi: 10.1063/1.5058262
– ident: 10.1016/j.jmrt.2023.08.036_bib167
  doi: 10.14359/51735976
– volume: 41
  start-page: 833
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib112
  article-title: Mode-I fracture toughness of glass/carbon fiber reinforced epoxy matrix polymer composite
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2020.09.160
– volume: 0
  start-page: 1
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib113
  article-title: International Journal of Polymer Analysis and Experimental and analytical investigation of thermo-mechanical responses of pure epoxy and carbon/Kevlar/S-glass/E-glass/epoxy interply hybrid laminated composites for aerospace applications
  publication-title: Int J Polym Anal Char
– volume: 9
  start-page: 13390
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib99
  article-title: Mechanical properties of composites with graphene oxide functionalization of either epoxy matrix or curaua fiber reinforcement
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2020.09.035
– volume: 4
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib153
  article-title: Recent developments in RAM based MWCNT composite materials: a short review
  publication-title: Funct Compos Struct
  doi: 10.1088/2631-6331/ac5730
– volume: 34
  start-page: 546
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib87
  article-title: Effect of chemical treatment on impact strength and dynamic thermal properties of Jute/PLA composites
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2020.03.110
– volume: 27
  start-page: 2249
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib92
  article-title: Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating SiC and Al2O3
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2019.09.106
– volume: 6
  start-page: 1
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib115
  article-title: Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites
  publication-title: Front Mater
  doi: 10.3389/fmats.2019.00224
– volume: 31
  start-page: 371
  year: 2015
  ident: 10.1016/j.jmrt.2023.08.036_bib148
  article-title: Fiber glass–bioactive glass composite for bone replacing and bone anchoring implants
  publication-title: Dent Mater
  doi: 10.1016/j.dental.2015.01.003
– volume: 10
  start-page: 27
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib4
  article-title: A review of fibre reinforced polymer structures
  publication-title: Fibers
  doi: 10.3390/fib10030027
– year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib197
  article-title: Eco-friendly MoS2/waste coconut oil nanofluid for machining of magnesium implants
  publication-title: Reviews on advanced materials science
– volume: 27
  start-page: 1694
  year: 2016
  ident: 10.1016/j.jmrt.2023.08.036_bib149
  article-title: Evaluation of the biocompatibility of new fiber-reinforced composite materials for craniofacial bone reconstruction
  publication-title: J Craniofac Surg
  doi: 10.1097/SCS.0000000000002925
– volume: 18
  start-page: 694
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib109
  article-title: Mechanical performance of jute and basalt fiber geo-grid-reinforced epoxy hybrid composite material
  publication-title: J Nat Fibers
  doi: 10.1080/15440478.2019.1645789
– volume: 9
  start-page: 18
  year: 2013
  ident: 10.1016/j.jmrt.2023.08.036_bib158
  article-title: Investigation of tribological behavior of stainless steel 304 and grey cast iron rotating against EN32 steel using pin on disc apparatus
  publication-title: IOSR J Mech Civ Eng
  doi: 10.9790/1684-0941822
– volume: 91
  start-page: 21
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib125
  article-title: Improved interfacial strength of SiO2 coated carbon fiber in cement matrix
  publication-title: Cem Concr Compos
  doi: 10.1016/j.cemconcomp.2018.04.007
– volume: 21
  start-page: 2191
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib170
  article-title: Correlating multi-scale structure characteristics to mechanical behavior of Caprinae horn sheaths
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2022.10.044
– volume: 14
  start-page: 171
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib136
  article-title: Statistical analysis of process parameters in drilling of Al/Al2O3p metal matrix composites
  publication-title: J Manuf Sci Prod
– volume: 72
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib127
  article-title: Prediction of tensile response for ultra-high-performance concrete with a strengthen fiber/matrix interface based on the Weibull stochastic process
  publication-title: J Build Eng
– volume: 174
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib72
  article-title: High-performance polyphenylene sulfide composites with ultra-high content of glass fiber fabrics
  publication-title: Compos Part B
  doi: 10.1016/j.compositesb.2019.05.001
– volume: 161
  start-page: 92
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib69
  article-title: Aramid nanofibers for multiscale fiber reinforcement of polymer composites
  publication-title: Compos Sci Technol
  doi: 10.1016/j.compscitech.2018.04.005
– volume: 44
  start-page: 493
  year: 2013
  ident: 10.1016/j.jmrt.2023.08.036_bib73
  article-title: Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites
  publication-title: Mater Des
  doi: 10.1016/j.matdes.2012.08.029
– volume: 54
  start-page: 3847
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib119
  article-title: Improvement of mechanical properties and thermal conductivity of carbon fiber laminated composites through depositing graphene nanoplatelets on fibers
  publication-title: J Mater Sci
  doi: 10.1007/s10853-018-3097-3
– volume: 51
  start-page: 129
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib71
  article-title: Journal of Industrial and Engineering Chemistry Enhanced interfacial adhesion between polypropylene and carbon fi ber by graphene oxide/polyethyleneimine coating
  publication-title: J Ind Eng Chem
  doi: 10.1016/j.jiec.2017.02.024
– volume: 1
  start-page: 23
  year: 2005
  ident: 10.1016/j.jmrt.2023.08.036_bib11
  article-title: A review on natural fibre-based composites—Part II
  publication-title: J Nat Fibers
  doi: 10.1300/J395v01n03_03
– volume: 22
  start-page: 1307
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib176
  article-title: Phase-field simulation of nano-α′ precipitates under irradiation and dislocations
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2022.11.165
– volume: 2013
  start-page: 1
  year: 2013
  ident: 10.1016/j.jmrt.2023.08.036_bib31
  article-title: Study in physical and mechanical properties of hemp fibres
  publication-title: Adv Mater Sci Eng
  doi: 10.1155/2013/325085
– volume: 37
  start-page: 374
  year: 2012
  ident: 10.1016/j.jmrt.2023.08.036_bib3
  article-title: Do fiber-reinforced polymer composites provide environmentally benign alternatives? A life-cycle-assessment-based study
  publication-title: MRS Bull
  doi: 10.1557/mrs.2012.33
– volume: 30
  start-page: 1170
  issue: 3
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib183
  article-title: Design of bioinspired highly aligned bamboo-mimetic metamaterials with structural and functional anisotropy
  publication-title: IEEE Trans Dielectr Electr Insul
  doi: 10.1109/TDEI.2023.3264964
– volume: 59
  start-page: 1
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib121
  article-title: Processing and characterization of hemp fiber textile composites with micro-braiding technique
  publication-title: Compos Part A Appl Sci Manuf
  doi: 10.1016/j.compositesa.2013.12.009
– volume: 1
  start-page: 3851
  year: 2008
  ident: 10.1016/j.jmrt.2023.08.036_bib85
  article-title: Carbon/Dyneema® intralaminar hybrids: new strategy to increase impact resistance or decrease mass of carbon fiber composites
  publication-title: ICAS Secr - 26th Congr Int Counc Aeronaut Sci
– volume: 940
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib172
  article-title: Microstructural evolution in graphene nanoplatelets reinforced magnesium matrix composites fabricated through thixomolding process
  publication-title: J Alloys Compd
  doi: 10.1016/j.jallcom.2023.168824
– volume: 62
  start-page: 2297
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib9
  article-title: Effect of Hybridization, manufacturing methods and factors influencing natural fibers reinforced composites and its commercial applications – a review
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2022.04.085
– volume: 8
  year: 2021
  ident: 10.1016/j.jmrt.2023.08.036_bib41
  article-title: Mechanical properties of Carbon-matrix composites for a blade runner's artificial leg
  publication-title: Cogent Eng
  doi: 10.1080/23311916.2021.1923382
– volume: 15
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib74
  article-title: Effect of carbon fiber surface modification on their interfacial interaction with polysulfone
  publication-title: Results Phys
  doi: 10.1016/j.rinp.2019.102634
– volume: 26
  start-page: 1145
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib157
  article-title: Microstructural analysis of friction stir welded Mg AZ31 alloy
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2020.02.230
– volume: 303
  year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib168
  article-title: Mechanical performance and damage monitoring of CFRP thermoplastic laminates with an open hole repaired by 3D printed patches
  publication-title: Compos Struct
  doi: 10.1016/j.compstruct.2022.116308
– volume: 9
  start-page: 578
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib55
  article-title: Influences of graphene oxide addition on mechanical properties of aramid fiber reinforced composites
  publication-title: Mater Express
  doi: 10.1166/mex.2019.1544
– ident: 10.1016/j.jmrt.2023.08.036_bib89
– volume: 8
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib6
  article-title: River plastic emissions to the world's oceans
  publication-title: Nat Commun
  doi: 10.1038/ncomms15611
– volume: 15
  start-page: 2618
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib5
  article-title: Synthesis, characterization, and modeling of aligned ZnO nanowire-enhanced carbon-fiber-reinforced composites
  publication-title: Materials
  doi: 10.3390/ma15072618
– volume: 6
  start-page: 59
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib91
  article-title: Influence of furfuryl alcohol fiber pre-treatment on the moisture absorption and mechanical properties of flax fiber composites
  publication-title: Fibers
  doi: 10.3390/fib6030059
– volume: 143
  start-page: 316
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib50
  article-title: Effect of hydrogen bonding on the liquid crystalline behavior of Poly(p-phenylene terephthamide) in sulfuric acid
  publication-title: Polymer
  doi: 10.1016/j.polymer.2018.04.028
– volume: 23
  start-page: 116
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib130
  article-title: The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): study of the interface of DPF–Polyurethane composite
  publication-title: South Afr J Chem Eng
  doi: 10.1016/j.sajce.2017.04.005
– ident: 10.1016/j.jmrt.2023.08.036_bib33
– start-page: 315
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib22
  article-title: Potential of natural/synthetic hybrid composites for aerospace applications
  publication-title: Sustain. Compos. Aerosp. Appl
– volume: 113
  start-page: 68
  year: 2017
  ident: 10.1016/j.jmrt.2023.08.036_bib118
  article-title: Tunable crack propagation behavior in carbon fi ber reinforced plastic laminates with polydopamine and graphene oxide treated fibers
  publication-title: JMADE
  doi: 10.1016/j.jde.2016.09.026
– year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib191
– volume: 586
  start-page: S459
  year: 2014
  ident: 10.1016/j.jmrt.2023.08.036_bib77
  article-title: Surface modification of carbon fibers and its effect on the fiber-matrix interaction of UHMWPE based composites
  publication-title: J Alloys Compd
  doi: 10.1016/j.jallcom.2012.11.048
– year: 2023
  ident: 10.1016/j.jmrt.2023.08.036_bib192
  article-title: Dry sliding wear characteristics of natural fibre reinforced poly-lactic acid composites for Engineering applications: fabrication, properties and characterizations
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2023.01.006
– ident: 10.1016/j.jmrt.2023.08.036_bib32
  doi: 10.1016/j.conbuildmat.2014.11.043
– volume: 5
  start-page: 28354
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib155
  article-title: A study of vibration and wear resistance of friction stir processed metal matrix composite
  publication-title: Mater Today Proc
  doi: 10.1016/j.matpr.2018.10.120
– volume: 174
  start-page: 125
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib54
  article-title: Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings
  publication-title: Compos Sci Technol
  doi: 10.1016/j.compscitech.2019.02.025
– volume: 202
  start-page: 566
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib65
  article-title: On the translaminar fracture toughness of Vectran/epoxy composite material
  publication-title: Compos Struct
  doi: 10.1016/j.compstruct.2018.03.004
– volume: 26
  start-page: 1189
  year: 2019
  ident: 10.1016/j.jmrt.2023.08.036_bib134
  article-title: Telescopic hydraulic cylinder made of composite material
  publication-title: Appl Compos Mater
  doi: 10.1007/s10443-019-09772-8
– volume: 12
  start-page: 902
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib75
  article-title: Effect of glass fibers thermal treatment on the mechanical and thermal behavior of polysulfone based composites
  publication-title: Polymers
  doi: 10.3390/polym12040902
– volume: 1953
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib106
  article-title: Fabrication and characterization of high impact hybrid matrix composites from thermoset resin and dyneema-glass fabric reinforcement
  publication-title: AIP Conf Proc
– volume: 17
  start-page: 155
  year: 2020
  ident: 10.1016/j.jmrt.2023.08.036_bib107
  article-title: Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites
  publication-title: J Nat Fibers
  doi: 10.1080/15440478.2018.1477083
– volume: 2
  start-page: 149
  year: 2013
  ident: 10.1016/j.jmrt.2023.08.036_bib12
  article-title: The effect of fiber morphology on the tensile strength of natural fibers
  publication-title: J Mater Res Technol
  doi: 10.1016/j.jmrt.2013.02.003
– volume: 9
  year: 2022
  ident: 10.1016/j.jmrt.2023.08.036_bib15
  article-title: A state-of-the-art review on potential applications of natural fiber-reinforced polymer composite filled with inorganic nanoparticle
  publication-title: Compos Part C Open Access
  doi: 10.1016/j.jcomc.2022.100298
– volume: 206
  start-page: 637
  year: 2018
  ident: 10.1016/j.jmrt.2023.08.036_bib35
  article-title: Additive manufacturing of woven carbon fibre polymer composites
  publication-title: Compos Struct
  doi: 10.1016/j.compstruct.2018.08.091
– volume: 20
  start-page: 287
  year: 2013
  ident: 10.1016/j.jmrt.2023.08.036_bib64
  article-title: Liquid crystalline single-polymer short-fibers composites
  publication-title: Compos Interfac
  doi: 10.1080/15685543.2013.796753
SSID ssj0001596081
Score 2.5936441
SecondaryResourceType review_article
Snippet Nowadays, Fiber-reinforced Polymer Composites (FRPCs) are extensively utilized due to their remarkable properties such as high stiffness, excellent strength to...
SourceID doaj
crossref
elsevier
SourceType Open Website
Enrichment Source
Index Database
Publisher
StartPage 2975
SubjectTerms Applications
Chemical treatment
Fiber-matrix interfaces
FRPCs
Mechanical properties
Nanoparticles
SummonAdditionalLinks – databaseName: ScienceDirect Free and Delayed Access Titles*
  dbid: IXB
  link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1NT9wwELUQJ3qoWmjVLRT50BuyNom_uZVV0QqpHGiR9hY5jlMtYjer7CLxO_jFzDgOu1w4oJxsjSeJx_KMkzdvCPkpi0rA2ThjTjSCCRVqVjntmPOZryBAcTzybP-5VtNbcTWTsz0yGXJhEFaZ9v5-T4-7deoZp9kcr-bz8V9wbEYbCfFABscUg4yfmFWKSXyzi-13FgkxeqxVivIMB6TcmR7mdbfoEFJZ8MjkGZmat_4p0vjvuKkd13P5iXxMMSP91T_WZ7IXlofkww6T4BF5GkoW0D4XhbZLmn7vxxw2bEOoRxsEiLAuRL5UeHmKkHLEbYX1Ob1p7wNtm15ovEDy_ke6aGtEE0UDDlpW22wDlE-Ku_ZhvaPvC7m9_P1vMmWp3ALzQqsNUwIsE4yweeFlXZtM-MAtr50GH18pDtbU3Dd1qCGksrjDQvRiQc4WXlVS8q9kf9kuwzdCA0fS70LVuW5EEaTNucmKhhslJK-EGZF8mOTSJy5yLIlxXw6gs7sSDVOiYUqsk8nViJy9jFn1TBxvSl-g7V4kkUU7drTd_zIto1KEQjtjjdM2CNE0Fq5M-wBnQp4L50ZEDpYvXy1KUDV_4-bf3znumBxgq4ewnZD9TfcQfkDMs6lO46J-Bny-AN0
  priority: 102
  providerName: Elsevier
Title Critical review on advancements on the fiber-reinforced composites: Role of fiber/matrix modification on the performance of the fibrous composites
URI https://dx.doi.org/10.1016/j.jmrt.2023.08.036
https://doaj.org/article/4e27a898a79e44ff9f9f07ce625314aa
Volume 26
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV1Na9wwEBUlp_YQmrYh2yZFh96KiG2NvnpLQkNaaA-lgb0ZWZIhIbsOmw30d_QXZ0ayE5_SSzEYbMYjoxGeJ_zmDWOfVNMB7o0r4aEHATpF0XnjhQ9V6BCgeJl1tn_81BeX8H2plrNWX8QJK_LAZeKOITXGW2e9cQmg7x0elQkJcbuswWdoVLlqtpkq9cGIzHOHUkx_VhirYKyYKeSu69WGiJSNzPqdWZ_5KStl8f5ZcpolnPPXbHdEivykvOEee5HWb9irmX7gW_Z3alTASwUKH9Z8_KmfK9foGgEe74kWIjYpq6SGFDkRyYmtle6-8F_DTeJDX4yOVyTZ_4evhkgcohy2ycvtU40B2Y-ON8P93czfO3Z5_vX32YUYmyyIAEZvhQaMR7Lg6iaoGG0FIUknozeY2TstMYZGhj6miEDK0XcVMYtDO9cE3Skl99nOelinA8aTJKnvRsfa9NAk5Wppq6aXVoOSHdgFq6dJbsOoQE6NMG7aiWp23VJgWgpMS90xpV6wz4_P3Bb9jWetTyl2j5aknZ1v4IpqxxXV_mtFLZiaIt-OMKTAC3R19czg7__H4B_YS3JZWGyHbGe7uU9HCHu23ce8wvH8bXn6AO0DAaM
linkProvider Directory of Open Access Journals
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1Lb9QwELZKOQAHxFMsTx-4IWuT-M2NVlRbaHuAVtqb5TgO2qq7WaVbid_BL2bGcbrLpQeUU5Kx8xjL8zn55htCPsqqFrA2LpgXrWBCxYbVXnvmQxFqACieJ53t0zM1uxDf5nK-Rw7HXBikVea5f5jT02ydj0zz25yuF4vpTwhsRhsJeKCAZYrh98h9QAMKBfSP5wfbDy0SQHoqVooNGLbIyTMDz-ty2SOnsuJJyjNJNW8DVNLx34lTO7Hn6Al5nEEj_TLc11OyF1fPyKMdKcHn5M9Ys4AOySi0W9H8fz8lseE-YD3aIkOE9TEJpsLTU-SUI3ErXn-mP7qrSLt2MJouUb3_N112DdKJkgfHXtbbdAO0zx333c31Tn8vyMXR1_PDGcv1FlgQWm2YEuCaaIQtqyCbxhQiRG554zUE-VpxcKfmoW1iA5jK4hQL8MWCna2CqqXkL8n-qlvFV4RGjqrflWpK3YoqSltyU1QtN0pIXgszIeX4kl3IYuRYE-PKjayzS4eOcegYh4UyuZqQT7dt1oMUx53WB-i7W0uU0U4Huv6Xy-PIiVhpb6zx2kYh2tbCVugQYVHIS-H9hMjR8-6fUQldLe64-Ov_bPeBPJidn564k-Oz72_IQzwz8Nnekv1NfxPfAQDa1O_TAP8LdFIEAQ
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Critical+review+on+advancements+on+the+fiber-reinforced+composites%3A+Role+of+fiber%2Fmatrix+modification+on+the+performance+of+the+fibrous+composites&rft.jtitle=Journal+of+materials+research+and+technology&rft.au=Harsh+Sharma&rft.au=Ajay+Kumar&rft.au=Sravendra+Rana&rft.au=Nanda+Gopal+Sahoo&rft.date=2023-09-01&rft.pub=Elsevier&rft.issn=2238-7854&rft.volume=26&rft.spage=2975&rft.epage=3002&rft_id=info:doi/10.1016%2Fj.jmrt.2023.08.036&rft.externalDBID=DOA&rft.externalDocID=oai_doaj_org_article_4e27a898a79e44ff9f9f07ce625314aa
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=2238-7854&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=2238-7854&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=2238-7854&client=summon