Monitoring gradient formation in a jet aerated bioreactor

• Published in: Engineering in life sciences Vol. 19; no. 3; pp. 159 - 167
• Main Authors: Weber, Sebastian, Schaepe, Sebastian, Freyer, Stephan, Kopf, Michael‐Helmut, Dietzsch, Christian
• Format: Journal Article
• Language: English
• Published: Germany John Wiley and Sons Inc 01.03.2019
• Subjects: dissolved oxygen gradient; jet loop reactor; macromixing; mass transfer; micromixing; dissolved oxygen gradient; jet loop reactor; micromixing; mass transfer; macromixing
• ISSN: 1618-0240; 1618-2863
• DOI: 10.1002/elsc.201800122

Jet aerated loop reactors (JLRs) provide high mass transfer coefficients (kLa) and can be used for the intensification of mass transfer limited reactions. The jet loop reactor achieves higher kLa values than a stirred tank reactor (STR). The improvement relies on significantly higher local power inputs (∼104) than those obtainable with the STR. Operation at high local turnover rates requires efficient macromixing, otherwise reactor inhomogeneities might occur. If sufficient homogenization is not achieved, the selectivity of the reaction and the respective yields are decreased. Therefore, the balance between mixing and mass transfer in jet loop reactors is a critical design aspect. Monitoring the dissolved oxygen levels during the turnover of a steady sodium sulfite feed implied the abundance of gradients in the JLR. Prolonged mixing times at identical power input and aeration rates (∼100%) were identified for the JLR in comparison to the STR. The insertion of a draft tube to the JLR led to a more homogenous dissolved oxygen distribution, but unfortunately a reduction of mixing time was not achieved. In case of increased medium viscosities as they may arise in high cell density cultivations, no gradient formation was detected. However, differences in medium viscosity significantly altered the mass transfer and mixing performance of the JLR.