Estimation of Concrete's Porosity by Ultrasounds

• Published in: Physics procedia Vol. 21; pp. 53 - 58
• Main Authors: Benouis, A., Grini, A.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 2011
• Subjects: correlation; mixtures; ots: concrete; porosity; ultrasounds; ots: concrete; correlation; porosity; ultrasounds; mixtures
• DOI: 10.1016/j.phpro.2011.10.009
• ISSN: 1875-3892

Durability of concrete depends strongly on porosity; this conditions the intensity of the interactions of the concrete with the aggressive agents. The pores inside the concrete facilitate the process of damage, which is generally initiated on the surface. The most used measurement is undoubtedly the measurement of porosity accessible to water. The porosimetry by intrusion with mercury constitutes a tool for investigation of the mesoporosity. The relationship between concrete mixtures, porosity and ultrasonic velocity of concrete samples measured by ultrasonic NDT is investigated. This experimental study is interested in the relations between the ultrasonic velocity measured by transducers of 7.5mm and 49.5mm diameter and with 54kHz frequency. Concrete specimens (160mm diameter and 320mm height) are fabricated with concrete of seven different mixtures (various W/C and S/S+G ratios), which gave porosities varying between 7% and 16%. Ultrasonic velocities in concrete were measured in longitudinal direction. Finally the results showed the influence of ratio W/C, where the porosity of the concretes of a ratio W/C _0,5 have correctly estimated by ultrasonic velocity. The integration of the concretes of a lower ratio, in this relation, caused a great dispersion. Porosity estimation of concretes with a ratio W/C lower than 0,5 became specific to each ratio.