A moving model rig with a scale ratio of 1/8 for high speed train aerodynamics

• Published in: Journal of wind engineering and industrial aerodynamics Vol. 152; pp. 50 - 58
• Main Authors: Yang, Qian-Suo, Song, Jun-Hao, Yang, Guo-Wei
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.05.2016
• Subjects: Acceleration; Aerodynamics; Air gun; Brakes; Compressed air; Deceleration; High speed trains; Magnetic brake; Moving model rig; Railway tracks; Railway tunnels; Scale (ratio); Trains; China, People's Rep; Magnetic brake; Air gun; Moving model rig; Compressed air; Acceleration; Deceleration
• ISSN: 0167-6105; 1872-8197
• DOI: 10.1016/j.jweia.2016.03.002

To achieve an accurate aerodynamic optimization of the outline of a high speed train and an experimental simulation of the meeting of two trains, especially in a tunnel, a train model in a moving model rig (MMR) should feature a large scale ratio and be capable of accelerating to the real Mach number. For this purpose, an MMR is developed for the acceleration, testing, and deceleration of a train model along opposite directions. To meet the railway standards of China, the distance between the centers of the two tracks is set to 625mm for the scale ratio of 1/8. The powers of the train models originate from compressed air and the brake force from the motion of the permanent magnets relative to the motionless steel plates along the tracks. The compressed air from an air gun with an air chamber pushes a set of pistons in an accelerating tube forward. These pistons tow a trailer through a towrope, and this trailer drives the train model up to a certain speed. The initial pressure of the compressed air determines the speed of the train model, and the brake distance depends on the kinetic energy of the model and the weight of magnets on the bottom of the model. The corresponding experimental measurements are presented in this work. Two train models weighing 265 and 106kg can be accelerated to speeds of 401 and 507km/h, respectively, within a brake distance of 70m. Thus, the train model with one or several cars can have a scale ratio of at least 1/8. Additional experimental results on the evolution of the pressure wave on the tunnel wall are introduced to demonstrate the repeatability of the experiment on the train model passing through the tunnel model. •A moving model rig with a scale ratio of 1/8 for high speed train aerodynamics along two opposite directions was developed.•The pistons in the acceleration tube are pushed by the compressed air and pulls the trailer and train model with a towrope.•The brake forces of the train model and trailer are from the motion of the permanent magnets relative to the steel plates.