Effect of Zr on microstructure and properties of TC4 alloy fabricated by laser additive manufacturing
In this paper, the effect of Zr on the microstructure of laser additive manufactured Ti–6Al–4V (TC4) alloy is studied by adding different contents of Zr (0%, 15%, 30%, 45%), and the mechanisms of strengthening and corrosion passivation are also discussed. The results show that the stability of β pha...
Saved in:
| Published in | Journal of materials research and technology Vol. 24; pp. 8782 - 8792 |
|---|---|
| Main Authors | , , , , , , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier B.V
01.05.2023
Elsevier |
| Subjects | |
| Online Access | Get full text |
| ISSN | 2238-7854 |
| DOI | 10.1016/j.jmrt.2023.05.137 |
Cover
| Abstract | In this paper, the effect of Zr on the microstructure of laser additive manufactured Ti–6Al–4V (TC4) alloy is studied by adding different contents of Zr (0%, 15%, 30%, 45%), and the mechanisms of strengthening and corrosion passivation are also discussed. The results show that the stability of β phase increases with increasing Zr content, when Zr content reaches 45%, the β phase is completely retained to room temperature. The microstructure of TC4 can be refined by Zr (when the content of Zr is less than or equal to 30%), and the ultra-fine martensite with twinning substructure can be formed. With the increase of Zr content to 45%, the strength of the alloy increases from 1044 MPa to 1360 MPa. The elongation decreases from 10.8% to 7.7% with the increase of Zr content to 30%. However, as the content of Zr increases to 45%, the elongation increases to 12.5%. The abnormal phenomenon of elongation is mainly due to the change of deformation mechanism from dislocation slip to stress-induced martensite transformation with the content of Zr increasing to 45%. The corrosion resistance of TC4-Zr alloys increases significantly with the increase of Zr content, which is mainly attributed to the better corrosion resistance of Zr and the better protection of ZrO2 formed in passivation film. |
|---|---|
| AbstractList | In this paper, the effect of Zr on the microstructure of laser additive manufactured Ti–6Al–4V (TC4) alloy is studied by adding different contents of Zr (0%, 15%, 30%, 45%), and the mechanisms of strengthening and corrosion passivation are also discussed. The results show that the stability of β phase increases with increasing Zr content, when Zr content reaches 45%, the β phase is completely retained to room temperature. The microstructure of TC4 can be refined by Zr (when the content of Zr is less than or equal to 30%), and the ultra-fine martensite with twinning substructure can be formed. With the increase of Zr content to 45%, the strength of the alloy increases from 1044 MPa to 1360 MPa. The elongation decreases from 10.8% to 7.7% with the increase of Zr content to 30%. However, as the content of Zr increases to 45%, the elongation increases to 12.5%. The abnormal phenomenon of elongation is mainly due to the change of deformation mechanism from dislocation slip to stress-induced martensite transformation with the content of Zr increasing to 45%. The corrosion resistance of TC4-Zr alloys increases significantly with the increase of Zr content, which is mainly attributed to the better corrosion resistance of Zr and the better protection of ZrO2 formed in passivation film. |
| Author | Zhang, L.W. Jiao, L.S. Jiang, X.J. Zhang, X.Y. Wang, F. Qi, H.B. Bao, S.J. |
| Author_xml | – sequence: 1 givenname: X.J. surname: Jiang fullname: Jiang, X.J. email: xiaoqwq@126.com organization: Hebei Key Laboratory of Advanced Materials for Transportation Engineering and Environment, School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang, 050043, China – sequence: 2 givenname: S.J. surname: Bao fullname: Bao, S.J. organization: Hebei Key Laboratory of Advanced Materials for Transportation Engineering and Environment, School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang, 050043, China – sequence: 3 givenname: L.W. surname: Zhang fullname: Zhang, L.W. organization: Hebei Key Laboratory of Advanced Materials for Transportation Engineering and Environment, School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang, 050043, China – sequence: 4 givenname: X.Y. surname: Zhang fullname: Zhang, X.Y. organization: State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, China – sequence: 5 givenname: L.S. surname: Jiao fullname: Jiao, L.S. organization: Hebei Key Laboratory of Material Near-net Forming Technology, School of Materials Science and Engineering, Hebei University of Science and Technology, Shijiazhuang, 050018, China – sequence: 6 givenname: H.B. surname: Qi fullname: Qi, H.B. organization: Hebei Key Laboratory of Advanced Materials for Transportation Engineering and Environment, School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang, 050043, China – sequence: 7 givenname: F. surname: Wang fullname: Wang, F. organization: China Railway Construction Group Co. Ltd., Beijing 100049, China |
| BookMark | eNp9kU1PwyAYgDlook7_gCf-wCqUUtrEi1nmR7LEi168kLfwYmi6slC2ZP9e6vTiwROB8DzhfbgiZ2MYkZBbzgrOeH3XF_02pqJkpSiYLLhQZ-SyLEWzVI2sLsjNNPWMMS7bmjX8kuDaOTSJBkc_Ig0j3XoTw5Ti3qR9RAqjpbsYdhiTx2m-9raqKAxDOFIHXfQGElraHekAE0YK1vrkD0i3MO4dzBI_fl6TcwfDhDc_64K8P67fVs_LzevTy-phszQVZ2nZmqZlRlSCo1G1RKlQGRAgmGU27xXaToC0WKJp2xIk2M5xWdlW1G0HlViQl5PXBuj1LvotxKMO4PX3QYifGvIgZkCdxbzGpm4rZSrJLHDl6tJZ1VnZdcpmV3NyzT2miE4bnyD5MKYIftCc6bm47vVcXM_FNZM6F89o-Qf9fcq_0P0Jwhzo4DHqyXgcDVof8w_lCfx_-Beq86DD |
| CitedBy_id | crossref_primary_10_1038_s41598_024_52100_9 crossref_primary_10_3390_met14050585 crossref_primary_10_1016_j_jmmm_2024_172267 crossref_primary_10_1016_j_jmrt_2024_05_221 crossref_primary_10_1016_j_mtcomm_2024_111111 crossref_primary_10_1016_j_jmrt_2024_05_227 crossref_primary_10_1007_s12540_024_01777_8 crossref_primary_10_1016_j_mseb_2024_117341 crossref_primary_10_1016_j_vacuum_2024_113423 crossref_primary_10_1016_j_jallcom_2024_174897 crossref_primary_10_1016_j_jmrt_2024_02_013 crossref_primary_10_1016_j_heliyon_2024_e35259 crossref_primary_10_1088_2053_1591_ad5cdc crossref_primary_10_1177_09544054241245468 crossref_primary_10_1016_j_matchemphys_2024_129645 crossref_primary_10_1016_j_jallcom_2025_179230 crossref_primary_10_1016_j_matchar_2024_113950 crossref_primary_10_1016_j_heliyon_2024_e39660 crossref_primary_10_3390_ma17030686 crossref_primary_10_1016_j_jmrt_2024_05_039 crossref_primary_10_1088_2053_1591_ad6237 crossref_primary_10_1016_j_optlastec_2024_111325 crossref_primary_10_1016_j_ijpvp_2024_105196 crossref_primary_10_1016_j_jmrt_2024_10_020 crossref_primary_10_1016_j_jallcom_2024_173799 crossref_primary_10_1016_j_optmat_2024_115764 crossref_primary_10_1016_j_intermet_2024_108399 crossref_primary_10_55713_jmmm_v34i3_1963 crossref_primary_10_1016_j_measurement_2024_115353 crossref_primary_10_1016_j_msea_2023_145896 crossref_primary_10_1016_j_triboint_2024_109826 crossref_primary_10_3390_ma17112565 crossref_primary_10_1007_s10854_024_12449_z crossref_primary_10_1016_j_inoche_2024_112428 crossref_primary_10_1016_j_jpcs_2024_112095 crossref_primary_10_1080_00084433_2024_2359317 crossref_primary_10_1016_j_mtchem_2024_102163 crossref_primary_10_1021_acsomega_3c08109 crossref_primary_10_1038_s41598_024_66379_1 crossref_primary_10_1007_s43452_024_00983_w crossref_primary_10_1016_j_optlastec_2024_110684 crossref_primary_10_1111_jace_19998 crossref_primary_10_1016_j_jmapro_2024_04_016 crossref_primary_10_1177_09544062241274862 crossref_primary_10_1007_s11665_024_09618_w crossref_primary_10_3390_ma17030570 crossref_primary_10_22349_1994_6716_2023_116_4_59_68 crossref_primary_10_1515_ntrev_2024_0017 crossref_primary_10_1016_j_jmrt_2024_02_037 crossref_primary_10_1016_j_jmrt_2024_04_127 crossref_primary_10_1016_j_matlet_2025_138101 crossref_primary_10_1080_10910344_2024_2324828 crossref_primary_10_1177_09544054241254622 crossref_primary_10_1007_s10853_025_10684_1 crossref_primary_10_1515_ijmr_2024_0061 crossref_primary_10_3390_ma17071498 crossref_primary_10_1080_15376494_2024_2369263 crossref_primary_10_1016_j_diamond_2024_111162 crossref_primary_10_1007_s11665_024_10225_y crossref_primary_10_1016_j_jmrt_2023_12_144 crossref_primary_10_1016_j_ijhydene_2025_03_281 crossref_primary_10_1016_j_jmrt_2024_02_107 crossref_primary_10_1177_09544089241239817 crossref_primary_10_1108_RPJ_02_2024_0091 crossref_primary_10_1016_j_jmrt_2024_12_241 crossref_primary_10_3390_met14010096 crossref_primary_10_1007_s00170_024_13883_3 crossref_primary_10_1016_j_jmrt_2024_06_120 crossref_primary_10_1016_j_jmapro_2024_07_110 crossref_primary_10_1016_j_mtcomm_2024_109698 crossref_primary_10_1016_j_jmrt_2024_07_044 crossref_primary_10_1021_acsomega_3c07837 crossref_primary_10_1016_j_jmrt_2024_02_023 crossref_primary_10_3390_coatings14070866 crossref_primary_10_1016_j_corsci_2025_112729 crossref_primary_10_1080_00084433_2024_2357859 crossref_primary_10_1016_j_addma_2024_104562 |
| Cites_doi | 10.3390/coatings13020397 10.1016/j.actamat.2020.03.003 10.1016/j.jallcom.2019.152642 10.1016/j.matdes.2019.108191 10.1016/j.msea.2011.10.053 10.1016/j.actamat.2017.04.071 10.1080/21663831.2022.2115323 10.1007/s10909-021-02562-2 10.1016/j.msea.2018.09.087 10.1016/j.corsci.2016.09.012 10.1016/j.jmmm.2012.08.031 10.1016/j.optlastec.2016.12.028 10.1016/j.corsci.2019.108337 10.1016/j.actamat.2021.116954 10.1016/j.compositesb.2022.110399 10.1016/S0921-5093(98)01156-3 10.1016/j.jallcom.2014.07.041 10.1016/j.physleta.2013.11.012 10.1016/j.msea.2022.144440 10.1016/j.msea.2012.08.128 10.1038/s41563-022-01359-2 10.1038/s41586-019-1783-1 10.1016/j.jallcom.2023.169379 10.1016/j.msea.2012.05.043 10.1016/j.actamat.2010.02.004 10.1016/j.msea.2019.138545 10.1016/j.msea.2015.05.047 10.1038/s41467-022-32446-2 10.1016/j.actamat.2012.11.037 10.1016/j.msea.2020.140673 10.1016/j.msea.2014.03.047 10.1038/s41598-021-89343-9 10.1016/j.actamat.2014.11.028 10.1016/j.jallcom.2014.03.057 10.1016/j.jallcom.2016.12.373 10.1016/j.corsci.2020.108696 10.1016/j.actamat.2017.06.018 10.1016/j.actamat.2019.01.039 |
| ContentType | Journal Article |
| Copyright | 2023 The Authors |
| Copyright_xml | – notice: 2023 The Authors |
| DBID | 6I. AAFTH AAYXX CITATION DOA |
| DOI | 10.1016/j.jmrt.2023.05.137 |
| DatabaseName | ScienceDirect Open Access Titles Elsevier:ScienceDirect:Open Access CrossRef DOAJ Directory of Open Access Journals |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| Database_xml | – sequence: 1 dbid: DOA name: DOAJ Directory of Open Access Journals url: https://www.doaj.org/ sourceTypes: Open Website |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EndPage | 8792 |
| ExternalDocumentID | oai_doaj_org_article_7ca16e86947c450da17f62fd7bd5bb7d 10_1016_j_jmrt_2023_05_137 S223878542301102X |
| GroupedDBID | 0R~ 0SF 4.4 457 5VS 6I. AACTN AAEDT AAEDW AAFTH AAIKJ AALRI AAXUO ABMAC ABXRA ACGFS ADBBV ADCUG ADEZE AEXQZ AFTJW AGHFR AITUG ALMA_UNASSIGNED_HOLDINGS AMRAJ BCNDV EBS EJD FDB FNPLU GROUPED_DOAJ GX1 HH5 HZ~ IPNFZ IXB KQ8 M41 NCXOZ O9- OK1 RIG ROL SSZ AAYWO AAYXX ADVLN AFJKZ CITATION |
| ID | FETCH-LOGICAL-c410t-9c890c3431ec765e57e7ca3a30d0d65e7edb3a5de2ec992a5adbf154d9369ba43 |
| IEDL.DBID | IXB |
| ISSN | 2238-7854 |
| IngestDate | Wed Aug 27 00:05:42 EDT 2025 Tue Jul 01 01:14:46 EDT 2025 Thu Apr 24 23:02:38 EDT 2025 Sat Sep 30 17:11:34 EDT 2023 |
| IsDoiOpenAccess | true |
| IsOpenAccess | true |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Corrosion resistance Mechanical properties Ti alloys Microstructure Laser additive manufacturing |
| Language | English |
| License | This is an open access article under the CC BY-NC-ND license. |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c410t-9c890c3431ec765e57e7ca3a30d0d65e7edb3a5de2ec992a5adbf154d9369ba43 |
| OpenAccessLink | https://www.sciencedirect.com/science/article/pii/S223878542301102X |
| PageCount | 11 |
| ParticipantIDs | doaj_primary_oai_doaj_org_article_7ca16e86947c450da17f62fd7bd5bb7d crossref_citationtrail_10_1016_j_jmrt_2023_05_137 crossref_primary_10_1016_j_jmrt_2023_05_137 elsevier_sciencedirect_doi_10_1016_j_jmrt_2023_05_137 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | May-June 2023 2023-05-00 2023-05-01 |
| PublicationDateYYYYMMDD | 2023-05-01 |
| PublicationDate_xml | – month: 05 year: 2023 text: May-June 2023 |
| PublicationDecade | 2020 |
| PublicationTitle | Journal of materials research and technology |
| PublicationYear | 2023 |
| Publisher | Elsevier B.V Elsevier |
| Publisher_xml | – name: Elsevier B.V – name: Elsevier |
| References | Fu, Pan, Liu, Zhang (bib12) 2023; 32 Barriobero-Vila, Oliveira, Schwar, Buslaps, Requena (bib34) 2017; 135 Zhang, Wang, Zhang, Maldar, Zhu, Chen (bib24) 2020; 189 Warwick, Jones, Bantounas, Preuss, Dye (bib1) 2013; 61 Chen, Mao, Lu, He (bib15) 2017; 91 Luo, Yin, Simpson, Beese (bib19) 2022; 56 Jiang, Yu, Feng, Xia, Tan, Zhang (bib36) 2017; 699 Liang, Yin, Zhou, Feng, Ma, Liu (bib9) 2014; 615 Yang, Yang, Zhang, Zhu, Li, Xiao (bib21) 2023; 947 Xia, Zhang, Feng, Pan, Zhang, Ma (bib11) 2016; 112 Chen, Fabijanic, Zhang, Lui, Brandt, Xu (bib20) 2022; 58 Su, Jiang, Tan, Weng, Ng, Goh (bib31) 2023; 249 Chen, Petegem, Zou, Simonelli, Tse, Chang (bib29) 2022; 59 Semiatin, Seetharaman, Weiss (bib2) 1999; 263 Chen, Sun, Zhang, Zhou, Li (bib16) 2020; 771 Wu, Cai, Yang, Liu, Li, Li (bib38) 2018; 738 Mangesh, Shashank, Abhishek, Dasari, Banerjee, Banerjee (bib39) 2021; 213 Masrour, Hlil, Hamedoun, Benyoussef, Mounkachi, Bahmad (bib41) 2013; 326 Yuan, Zhang, Qiao, Xie, Xu, Qi (bib23) 2023; 862 Jing, Liang, Liu, Ma, Zhang, Liu (bib6) 2012; 552 Masrour, Bahmad, Hamedoun, Benyoussef, Hlil (bib42) 2014; 378 Zhu, Zhang, Meng, Zhang, Hodgson, Birbilis (bib37) 2022; 21 Peng, Guo, Shi, Qin, Zhao, Yao (bib4) 2014; 605 Fu, Yang, Shan, Li, Zhu, Ma (bib13) 2020; 164 Ji, Li, Chen, Wang, Ma, Zhang (bib40) 2020; 170 Zhang, Qiu, Gibson, Zheng, Fraser, StJohn (bib32) 2019; 576 Roy, Suwas (bib3) 2017; 134 Jiang, Zhou, Feng, Xia, Tan, Liang (bib35) 2015; 639 Liang, Yin, Jiang, Zhang, Ma, Liu (bib8) 2014; 603 Zhu, Liu, Gou, Gao, Chen (bib14) 2021; 11 Liao, Luan, Zhang, Liu, Murty, Liu (bib5) 2020; 816 Yvinec, Naït-Ali, Mellier, Bertheau, Cormier, Villechaise (bib18) 2022; 55 Xu, Brandt, Sun, Elambasseril, Liu, Latham (bib25) 2015; 85 Zhang, Liu, Sha, Jin, Hou, Bayat (bib30) 2022; 13 Jing, Liang, Liu, Ma, Liu (bib7) 2013; 559 Liang, Ma, Jing, Zhang, Liu (bib10) 2012; 532 Haubrich, Gussone, Barriobero-Vila, Kürnsteiner, Jägle, Raabe (bib26) 2019; 167 Xue, Lin, Wang, Liu, Yuan, Ding (bib33) 2023; 11 Ju, Li, Yang, Wang, Kang, Wang (bib22) 2021; 802 Wang, Chen, Gu, Sai, Lei, Williams (bib17) 2023; 13 Thijs, Verhaeghe, Craeghs, Humbeeck, Kruth (bib27) 2010; 58 Zhang, Tian, Bermingham, Rao, Jia, Zhu (bib28) 2019; 184 Idrissi, Ziti, Labrim, Bahmad (bib43) 2021; 202 Jing (10.1016/j.jmrt.2023.05.137_bib7) 2013; 559 Mangesh (10.1016/j.jmrt.2023.05.137_bib39) 2021; 213 Ju (10.1016/j.jmrt.2023.05.137_bib22) 2021; 802 Zhang (10.1016/j.jmrt.2023.05.137_bib30) 2022; 13 Xu (10.1016/j.jmrt.2023.05.137_bib25) 2015; 85 Zhang (10.1016/j.jmrt.2023.05.137_bib28) 2019; 184 Liang (10.1016/j.jmrt.2023.05.137_bib9) 2014; 615 Semiatin (10.1016/j.jmrt.2023.05.137_bib2) 1999; 263 Liao (10.1016/j.jmrt.2023.05.137_bib5) 2020; 816 Zhang (10.1016/j.jmrt.2023.05.137_bib32) 2019; 576 Zhu (10.1016/j.jmrt.2023.05.137_bib14) 2021; 11 Zhu (10.1016/j.jmrt.2023.05.137_bib37) 2022; 21 Yuan (10.1016/j.jmrt.2023.05.137_bib23) 2023; 862 Masrour (10.1016/j.jmrt.2023.05.137_bib42) 2014; 378 Wang (10.1016/j.jmrt.2023.05.137_bib17) 2023; 13 Chen (10.1016/j.jmrt.2023.05.137_bib16) 2020; 771 Ji (10.1016/j.jmrt.2023.05.137_bib40) 2020; 170 Warwick (10.1016/j.jmrt.2023.05.137_bib1) 2013; 61 Haubrich (10.1016/j.jmrt.2023.05.137_bib26) 2019; 167 Masrour (10.1016/j.jmrt.2023.05.137_bib41) 2013; 326 Chen (10.1016/j.jmrt.2023.05.137_bib20) 2022; 58 Chen (10.1016/j.jmrt.2023.05.137_bib29) 2022; 59 Jing (10.1016/j.jmrt.2023.05.137_bib6) 2012; 552 Roy (10.1016/j.jmrt.2023.05.137_bib3) 2017; 134 Peng (10.1016/j.jmrt.2023.05.137_bib4) 2014; 605 Thijs (10.1016/j.jmrt.2023.05.137_bib27) 2010; 58 Su (10.1016/j.jmrt.2023.05.137_bib31) 2023; 249 Fu (10.1016/j.jmrt.2023.05.137_bib12) 2023; 32 Fu (10.1016/j.jmrt.2023.05.137_bib13) 2020; 164 Yang (10.1016/j.jmrt.2023.05.137_bib21) 2023; 947 Xue (10.1016/j.jmrt.2023.05.137_bib33) 2023; 11 Liang (10.1016/j.jmrt.2023.05.137_bib10) 2012; 532 Jiang (10.1016/j.jmrt.2023.05.137_bib36) 2017; 699 Luo (10.1016/j.jmrt.2023.05.137_bib19) 2022; 56 Yvinec (10.1016/j.jmrt.2023.05.137_bib18) 2022; 55 Wu (10.1016/j.jmrt.2023.05.137_bib38) 2018; 738 Chen (10.1016/j.jmrt.2023.05.137_bib15) 2017; 91 Barriobero-Vila (10.1016/j.jmrt.2023.05.137_bib34) 2017; 135 Jiang (10.1016/j.jmrt.2023.05.137_bib35) 2015; 639 Zhang (10.1016/j.jmrt.2023.05.137_bib24) 2020; 189 Idrissi (10.1016/j.jmrt.2023.05.137_bib43) 2021; 202 Liang (10.1016/j.jmrt.2023.05.137_bib8) 2014; 603 Xia (10.1016/j.jmrt.2023.05.137_bib11) 2016; 112 |
| References_xml | – volume: 32 start-page: 3084 year: 2023 end-page: 3093 ident: bib12 article-title: Gradient structure of Ti-55531 with nano-ultrafine grains fabricated by simulation and suction casting publication-title: J Mater Eng Perform – volume: 771 start-page: 138545 year: 2020 ident: bib16 article-title: Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler publication-title: Mater Sci Eng, A – volume: 164 start-page: 108337 year: 2020 ident: bib13 article-title: Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones publication-title: Corrosion Sci – volume: 91 start-page: 197 year: 2017 end-page: 202 ident: bib15 article-title: Investigation of welding crack in micro laser welded NiTiNb shape memory alloy and Ti6Al4V alloy dissimilar metals joints publication-title: Opt Laser Technol – volume: 576 start-page: 91 year: 2019 end-page: 95 ident: bib32 article-title: Additive manufacturing of ultrafine-grained high-strength titanium alloys publication-title: Nature – volume: 605 start-page: 80 year: 2014 end-page: 88 ident: bib4 article-title: Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map publication-title: Mater Sci Eng – volume: 639 start-page: 407 year: 2015 end-page: 411 ident: bib35 article-title: Influence of Zr content on β-phase stability in α-type Ti–Al alloys publication-title: Mater Sci Eng – volume: 13 start-page: 397 year: 2023 ident: bib17 article-title: Antifouling coatings fabricated by laser cladding publication-title: Coatings – volume: 167 start-page: 136 year: 2019 end-page: 148 ident: bib26 article-title: The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V publication-title: Acta Mater – volume: 816 start-page: 152642 year: 2020 ident: bib5 article-title: A multi-deformation mechanisms assisted metastable β-ZrTiAlV alloy exhibits high yield strength and high work hardening rate publication-title: J Alloys Compd – volume: 552 start-page: 295 year: 2012 end-page: 300 ident: bib6 article-title: Structure and mechanical properties of Ti–6Al–4V alloy after zirconium addition publication-title: Mater Sci Eng – volume: 56 start-page: 102915 year: 2022 ident: bib19 article-title: Effect of processing parameters on pore structures, grain features, and mechanical properties in Ti-6Al-4V by laser powder bed fusion publication-title: Addit Manuf – volume: 189 start-page: 93 year: 2020 end-page: 104 ident: bib24 article-title: Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization publication-title: Acta Mater – volume: 862 start-page: 144440 year: 2023 ident: bib23 article-title: Effect of build orientation on dynamic compressive behaviour of Ti-6Al-4V alloy fabricated by selective laser melting publication-title: Mater Sci Eng – volume: 326 start-page: 166 year: 2013 end-page: 170 ident: bib41 article-title: Theoretical investigation of electronic and magnetic properties of MnAu layers publication-title: J Magn Magn Mater – volume: 134 start-page: 283 year: 2017 end-page: 301 ident: bib3 article-title: Orientation dependent spheroidization response and macro-zone formation during sub β-transus processing of Ti-6Al-4V alloy publication-title: Acta Mater – volume: 21 start-page: 1258 year: 2022 end-page: 1262 ident: bib37 article-title: Ultrastrong nanotwinned titanium alloys through additive manufacturing publication-title: Nat Mater – volume: 802 start-page: 140673 year: 2021 ident: bib22 article-title: Evolution of the microstructure and optimization of the tensile properties of the Ti-6Al-4V alloy by selective laser melting and heat treatment publication-title: Mater Sci Eng – volume: 13 start-page: 4660 year: 2022 ident: bib30 article-title: Designing against phase and property heterogeneities in additively manufactured titanium alloys publication-title: Nat Commun – volume: 378 start-page: 276 year: 2014 end-page: 279 ident: bib42 article-title: Magnetic properties of Ni/Au core/shell studied by Monte Carlo simulations publication-title: Phys Lett – volume: 58 start-page: 103041 year: 2022 ident: bib20 article-title: Deciphering the transformation pathway in laser powder-bed fusion additive manufacturing of Ti-6Al-4V alloy publication-title: Addit Manuf – volume: 58 start-page: 3303 year: 2010 end-page: 3312 ident: bib27 article-title: A study of the microstructural evolution during selective laser melting of Ti-6Al-4V publication-title: Acta Mater – volume: 559 start-page: 474 year: 2013 end-page: 479 ident: bib7 article-title: Aging effects on the microstructures and mechanical properties of the Ti–20Zr–6.5Al–4V alloy publication-title: Mater Sci Eng, A – volume: 85 start-page: 74 year: 2015 end-page: 84 ident: bib25 article-title: Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition publication-title: Acta Mater – volume: 55 start-page: 102830 year: 2022 ident: bib18 article-title: Tensile properties of Ti-6Al-4V as-built by laser metal deposition: the relationship between heat affected zone bands, strain localization and anisotropy in ductility publication-title: Addit Manuf – volume: 603 start-page: 42 year: 2014 end-page: 47 ident: bib8 article-title: Strengthening mechanism of two-phase titanium alloys with basketweave microstructure publication-title: J Alloys Compd – volume: 532 start-page: 1 year: 2012 end-page: 5 ident: bib10 article-title: Microstructure and mechanical properties of hot-rolled ZrTiAlV alloys publication-title: Mater Sci Eng – volume: 11 start-page: 10020 year: 2021 ident: bib14 article-title: Effect of heat input on interfacial characterization of the butter joint of hot-rolling CP-Ti/Q235 bimetallic sheets by Laser+CMT publication-title: Sci Rep – volume: 59 start-page: 103173 year: 2022 ident: bib29 article-title: Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion publication-title: Addit Manuf – volume: 202 start-page: 343 year: 2021 end-page: 359 ident: bib43 article-title: Half-metallicity and magnetism in the full heusler alloy Fe2MnSn with L21 and XA stability ordering phases publication-title: J Low Temp Phys – volume: 615 start-page: 804 year: 2014 end-page: 808 ident: bib9 article-title: Abnormal martensitic transformation of high Zr-containing Ti alloys publication-title: J Alloys Compd – volume: 184 start-page: 108191 year: 2019 ident: bib28 article-title: Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition publication-title: Mater Des – volume: 249 start-page: 110399 year: 2023 ident: bib31 article-title: Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying publication-title: Composites Part B – volume: 699 start-page: 256 year: 2017 end-page: 261 ident: bib36 article-title: Abnormal β-phase stability in TiZrAl alloys publication-title: J Alloys Compd – volume: 263 start-page: 257 year: 1999 end-page: 271 ident: bib2 article-title: Flow behavior and globularization kinetics during hot working of Ti-6Al-4V with a colony alpha microstructure publication-title: Mater Sci Eng – volume: 947 start-page: 169379 year: 2023 ident: bib21 article-title: Spall damage in laser-powder-bed-fusion manufactured Ti-6Al-4V: mechanisms and microstructure effects publication-title: J Alloys Compd – volume: 213 start-page: 116954 year: 2021 ident: bib39 article-title: Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V publication-title: Acta Mater – volume: 11 start-page: 60 year: 2023 end-page: 68 ident: bib33 article-title: Achieving fully-equiaxed fine β-grains in titanium alloy produced by additive manufacturing publication-title: Mater Res Letters – volume: 170 start-page: 108696 year: 2020 ident: bib40 article-title: Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation films publication-title: Corrosion Sci – volume: 112 start-page: 687 year: 2016 end-page: 695 ident: bib11 article-title: Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V- publication-title: Corrosion Sci – volume: 61 start-page: 1603 year: 2013 end-page: 1615 ident: bib1 article-title: In situ observation of texture and microstructure evolution during rolling and globularization of Ti-6Al-4V publication-title: Acta Mater – volume: 135 start-page: 132 year: 2017 end-page: 143 ident: bib34 article-title: Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy publication-title: Acta Mater – volume: 738 start-page: 10 year: 2018 end-page: 14 ident: bib38 article-title: Enhanced mechanical properties of Ti-6Al-2Zr-1Mo-1V with ultrafine crystallites and nano-scale twins fabricated by selective laser melting publication-title: Mater Sci Eng – volume: 13 start-page: 397 issue: 2 year: 2023 ident: 10.1016/j.jmrt.2023.05.137_bib17 article-title: Antifouling coatings fabricated by laser cladding publication-title: Coatings doi: 10.3390/coatings13020397 – volume: 189 start-page: 93 year: 2020 ident: 10.1016/j.jmrt.2023.05.137_bib24 article-title: Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization publication-title: Acta Mater doi: 10.1016/j.actamat.2020.03.003 – volume: 816 start-page: 152642 year: 2020 ident: 10.1016/j.jmrt.2023.05.137_bib5 article-title: A multi-deformation mechanisms assisted metastable β-ZrTiAlV alloy exhibits high yield strength and high work hardening rate publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2019.152642 – volume: 55 start-page: 102830 year: 2022 ident: 10.1016/j.jmrt.2023.05.137_bib18 article-title: Tensile properties of Ti-6Al-4V as-built by laser metal deposition: the relationship between heat affected zone bands, strain localization and anisotropy in ductility publication-title: Addit Manuf – volume: 184 start-page: 108191 year: 2019 ident: 10.1016/j.jmrt.2023.05.137_bib28 article-title: Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition publication-title: Mater Des doi: 10.1016/j.matdes.2019.108191 – volume: 532 start-page: 1 year: 2012 ident: 10.1016/j.jmrt.2023.05.137_bib10 article-title: Microstructure and mechanical properties of hot-rolled ZrTiAlV alloys publication-title: Mater Sci Eng doi: 10.1016/j.msea.2011.10.053 – volume: 134 start-page: 283 year: 2017 ident: 10.1016/j.jmrt.2023.05.137_bib3 article-title: Orientation dependent spheroidization response and macro-zone formation during sub β-transus processing of Ti-6Al-4V alloy publication-title: Acta Mater doi: 10.1016/j.actamat.2017.04.071 – volume: 11 start-page: 60 year: 2023 ident: 10.1016/j.jmrt.2023.05.137_bib33 article-title: Achieving fully-equiaxed fine β-grains in titanium alloy produced by additive manufacturing publication-title: Mater Res Letters doi: 10.1080/21663831.2022.2115323 – volume: 202 start-page: 343 year: 2021 ident: 10.1016/j.jmrt.2023.05.137_bib43 article-title: Half-metallicity and magnetism in the full heusler alloy Fe2MnSn with L21 and XA stability ordering phases publication-title: J Low Temp Phys doi: 10.1007/s10909-021-02562-2 – volume: 56 start-page: 102915 year: 2022 ident: 10.1016/j.jmrt.2023.05.137_bib19 article-title: Effect of processing parameters on pore structures, grain features, and mechanical properties in Ti-6Al-4V by laser powder bed fusion publication-title: Addit Manuf – volume: 738 start-page: 10 year: 2018 ident: 10.1016/j.jmrt.2023.05.137_bib38 article-title: Enhanced mechanical properties of Ti-6Al-2Zr-1Mo-1V with ultrafine crystallites and nano-scale twins fabricated by selective laser melting publication-title: Mater Sci Eng doi: 10.1016/j.msea.2018.09.087 – volume: 112 start-page: 687 year: 2016 ident: 10.1016/j.jmrt.2023.05.137_bib11 article-title: Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V-xZr alloys publication-title: Corrosion Sci doi: 10.1016/j.corsci.2016.09.012 – volume: 326 start-page: 166 year: 2013 ident: 10.1016/j.jmrt.2023.05.137_bib41 article-title: Theoretical investigation of electronic and magnetic properties of MnAu layers publication-title: J Magn Magn Mater doi: 10.1016/j.jmmm.2012.08.031 – volume: 91 start-page: 197 year: 2017 ident: 10.1016/j.jmrt.2023.05.137_bib15 article-title: Investigation of welding crack in micro laser welded NiTiNb shape memory alloy and Ti6Al4V alloy dissimilar metals joints publication-title: Opt Laser Technol doi: 10.1016/j.optlastec.2016.12.028 – volume: 164 start-page: 108337 year: 2020 ident: 10.1016/j.jmrt.2023.05.137_bib13 article-title: Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones publication-title: Corrosion Sci doi: 10.1016/j.corsci.2019.108337 – volume: 213 start-page: 116954 year: 2021 ident: 10.1016/j.jmrt.2023.05.137_bib39 article-title: Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V publication-title: Acta Mater doi: 10.1016/j.actamat.2021.116954 – volume: 249 start-page: 110399 year: 2023 ident: 10.1016/j.jmrt.2023.05.137_bib31 article-title: Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying publication-title: Composites Part B doi: 10.1016/j.compositesb.2022.110399 – volume: 263 start-page: 257 year: 1999 ident: 10.1016/j.jmrt.2023.05.137_bib2 article-title: Flow behavior and globularization kinetics during hot working of Ti-6Al-4V with a colony alpha microstructure publication-title: Mater Sci Eng doi: 10.1016/S0921-5093(98)01156-3 – volume: 615 start-page: 804 year: 2014 ident: 10.1016/j.jmrt.2023.05.137_bib9 article-title: Abnormal martensitic transformation of high Zr-containing Ti alloys publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2014.07.041 – volume: 378 start-page: 276 year: 2014 ident: 10.1016/j.jmrt.2023.05.137_bib42 article-title: Magnetic properties of Ni/Au core/shell studied by Monte Carlo simulations publication-title: Phys Lett doi: 10.1016/j.physleta.2013.11.012 – volume: 32 start-page: 3084 issue: 7 year: 2023 ident: 10.1016/j.jmrt.2023.05.137_bib12 article-title: Gradient structure of Ti-55531 with nano-ultrafine grains fabricated by simulation and suction casting publication-title: J Mater Eng Perform – volume: 862 start-page: 144440 year: 2023 ident: 10.1016/j.jmrt.2023.05.137_bib23 article-title: Effect of build orientation on dynamic compressive behaviour of Ti-6Al-4V alloy fabricated by selective laser melting publication-title: Mater Sci Eng doi: 10.1016/j.msea.2022.144440 – volume: 559 start-page: 474 year: 2013 ident: 10.1016/j.jmrt.2023.05.137_bib7 article-title: Aging effects on the microstructures and mechanical properties of the Ti–20Zr–6.5Al–4V alloy publication-title: Mater Sci Eng, A doi: 10.1016/j.msea.2012.08.128 – volume: 21 start-page: 1258 year: 2022 ident: 10.1016/j.jmrt.2023.05.137_bib37 article-title: Ultrastrong nanotwinned titanium alloys through additive manufacturing publication-title: Nat Mater doi: 10.1038/s41563-022-01359-2 – volume: 576 start-page: 91 year: 2019 ident: 10.1016/j.jmrt.2023.05.137_bib32 article-title: Additive manufacturing of ultrafine-grained high-strength titanium alloys publication-title: Nature doi: 10.1038/s41586-019-1783-1 – volume: 947 start-page: 169379 year: 2023 ident: 10.1016/j.jmrt.2023.05.137_bib21 article-title: Spall damage in laser-powder-bed-fusion manufactured Ti-6Al-4V: mechanisms and microstructure effects publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2023.169379 – volume: 552 start-page: 295 year: 2012 ident: 10.1016/j.jmrt.2023.05.137_bib6 article-title: Structure and mechanical properties of Ti–6Al–4V alloy after zirconium addition publication-title: Mater Sci Eng doi: 10.1016/j.msea.2012.05.043 – volume: 58 start-page: 3303 year: 2010 ident: 10.1016/j.jmrt.2023.05.137_bib27 article-title: A study of the microstructural evolution during selective laser melting of Ti-6Al-4V publication-title: Acta Mater doi: 10.1016/j.actamat.2010.02.004 – volume: 771 start-page: 138545 year: 2020 ident: 10.1016/j.jmrt.2023.05.137_bib16 article-title: Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler publication-title: Mater Sci Eng, A doi: 10.1016/j.msea.2019.138545 – volume: 639 start-page: 407 year: 2015 ident: 10.1016/j.jmrt.2023.05.137_bib35 article-title: Influence of Zr content on β-phase stability in α-type Ti–Al alloys publication-title: Mater Sci Eng doi: 10.1016/j.msea.2015.05.047 – volume: 13 start-page: 4660 year: 2022 ident: 10.1016/j.jmrt.2023.05.137_bib30 article-title: Designing against phase and property heterogeneities in additively manufactured titanium alloys publication-title: Nat Commun doi: 10.1038/s41467-022-32446-2 – volume: 61 start-page: 1603 year: 2013 ident: 10.1016/j.jmrt.2023.05.137_bib1 article-title: In situ observation of texture and microstructure evolution during rolling and globularization of Ti-6Al-4V publication-title: Acta Mater doi: 10.1016/j.actamat.2012.11.037 – volume: 802 start-page: 140673 year: 2021 ident: 10.1016/j.jmrt.2023.05.137_bib22 article-title: Evolution of the microstructure and optimization of the tensile properties of the Ti-6Al-4V alloy by selective laser melting and heat treatment publication-title: Mater Sci Eng doi: 10.1016/j.msea.2020.140673 – volume: 605 start-page: 80 year: 2014 ident: 10.1016/j.jmrt.2023.05.137_bib4 article-title: Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map publication-title: Mater Sci Eng doi: 10.1016/j.msea.2014.03.047 – volume: 11 start-page: 10020 issue: 1 year: 2021 ident: 10.1016/j.jmrt.2023.05.137_bib14 article-title: Effect of heat input on interfacial characterization of the butter joint of hot-rolling CP-Ti/Q235 bimetallic sheets by Laser+CMT publication-title: Sci Rep doi: 10.1038/s41598-021-89343-9 – volume: 85 start-page: 74 year: 2015 ident: 10.1016/j.jmrt.2023.05.137_bib25 article-title: Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition publication-title: Acta Mater doi: 10.1016/j.actamat.2014.11.028 – volume: 603 start-page: 42 year: 2014 ident: 10.1016/j.jmrt.2023.05.137_bib8 article-title: Strengthening mechanism of two-phase titanium alloys with basketweave microstructure publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2014.03.057 – volume: 699 start-page: 256 year: 2017 ident: 10.1016/j.jmrt.2023.05.137_bib36 article-title: Abnormal β-phase stability in TiZrAl alloys publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2016.12.373 – volume: 170 start-page: 108696 year: 2020 ident: 10.1016/j.jmrt.2023.05.137_bib40 article-title: Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation films publication-title: Corrosion Sci doi: 10.1016/j.corsci.2020.108696 – volume: 135 start-page: 132 year: 2017 ident: 10.1016/j.jmrt.2023.05.137_bib34 article-title: Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy publication-title: Acta Mater doi: 10.1016/j.actamat.2017.06.018 – volume: 58 start-page: 103041 year: 2022 ident: 10.1016/j.jmrt.2023.05.137_bib20 article-title: Deciphering the transformation pathway in laser powder-bed fusion additive manufacturing of Ti-6Al-4V alloy publication-title: Addit Manuf – volume: 167 start-page: 136 year: 2019 ident: 10.1016/j.jmrt.2023.05.137_bib26 article-title: The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V publication-title: Acta Mater doi: 10.1016/j.actamat.2019.01.039 – volume: 59 start-page: 103173 year: 2022 ident: 10.1016/j.jmrt.2023.05.137_bib29 article-title: Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion publication-title: Addit Manuf |
| SSID | ssj0001596081 |
| Score | 2.5295527 |
| Snippet | In this paper, the effect of Zr on the microstructure of laser additive manufactured Ti–6Al–4V (TC4) alloy is studied by adding different contents of Zr (0%,... |
| SourceID | doaj crossref elsevier |
| SourceType | Open Website Enrichment Source Index Database Publisher |
| StartPage | 8782 |
| SubjectTerms | Corrosion resistance Laser additive manufacturing Mechanical properties Microstructure Ti alloys |
| SummonAdditionalLinks | – databaseName: DOAJ Directory of Open Access Journals dbid: DOA link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV3BatwwEBVhT80hNE1Dt0mKDr0FE9mSLPuYLF2WQHpKIPQiJM0IGrLeYHYP-ftoLG_wKb30aCOPzGjQPNkz7zH2U_noZMRYANZtoVJKKnw0sUAPJdYVNI2kfue73_XqQd0-6seJ1BfVhGV64Oy4KxNcWWNTt8qEZApcaWJdRTAetPcGaPcVrZgcpnJ_cELmg0JpSn9NYRqtxo6ZXNz1tO6pkLKSRNtZkgj6JCsN5P2T5DRJOMvP7GhEivw6v-ExO8DuCzuc8AeeMMzcw3wT-Z-ebzq-pvK6TAm765G7DvgLfW3viTaVht0vFKdf7a88Oj8oBCFw_8oThsaeU3ERbX987bodtTwMPYxf2cPy1_1iVYy6CUVQpdgWbWhaEWSCBhhMrVEbTF6UTgoQkK4NgpdOA1YY2rZy2oGPCUoBift5p-Qpm3WbDr8xLkXlvGwCfXhQIJNhT0csgRogQTE9Z-XebzaMpOKkbfFs99VjT5Z8bcnXVmibfD1nl-_PvGRKjQ9H39ByvI8kOuzhRgoSOwaJ_VeQzJneL6YdkUVGDMnU3w8m__4_Jj9jn8hkrpI8Z7MUBHiRkMzW_xiC9g26SPIY priority: 102 providerName: Directory of Open Access Journals |
| Title | Effect of Zr on microstructure and properties of TC4 alloy fabricated by laser additive manufacturing |
| URI | https://dx.doi.org/10.1016/j.jmrt.2023.05.137 https://doaj.org/article/7ca16e86947c450da17f62fd7bd5bb7d |
| Volume | 24 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV07b9swECaCTO1QNC_UzQMcsgWCJVEUpbExYhgFmiUJYGQhSN6xsFHLhpAM-fe9k-TUWTx0JEFS0vFw95G6-06I68JHpyLGBLCsk4JcUuKjiQl6yLDMoaoU5zv_ui9nT8XPuZ4fiMk2F4bDKgfb39v0zloPPeNBmuPNYjF-IMdWmUoTHmAfls_JDnNWKSfxzW__3bNowuhdrVIen_CEIXemD_NarloOqcwVE3hmXA59xz91NP47bmrH9Uy_ii8DZpQ_-tc6EgfYHIvPO0yCJwJ7FmK5jvK5letGrjjQrieHfW1Rugbkhu_dWyZQ5WGPk0LyT_c3GZ3vagUhSP8mCU1jKznMiA2hXLnmlZMfumzGU_E0vXuczJKhgkISiix9SepQ1WlQBBIwmFKjNmiCU06lkAK1DYJXTgPmGOo6d9qBjwSqgMv8eVeoM3HYrBv8JqRKc-dVFfgKogBFC3s-bKWoAQiU6ZHItnKzYaAX5yoXf-w2jmxpWdaWZW1TbUnWI3HzPmfTk2vsHX3L2_E-komxu451-9sOmmHp87ISq7IuTCDNA5eZWOYRjAftvYGR0NvNtB_0jJZa7Hn49_-cdy4-casPkbwQh7TveEkw5sVfdcf_q05b_wJJ9vK8 |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1Lb9swDBa67tDtMGzrhqXdQ4fdCiO2ZVn2sQ1WpFvby1Ig6EWQRGpI0TiB0R7670vaTpddetjRsugHRZCfZfKjEN8LH52KGBPAsk4KCkmJjyYm6CHDMoeqUlzvfHFZTq-Kn3M93xGTTS0Mp1UOvr_36Z23HkbGgzbH68Vi_JsCW2UqTXiAY1g-fyFeEhoomUD_bH7yd6NFE0jvmpWyQMISQ_FMn-d1s2w5pzJXzOCZcT_0rQDV8fhvxamt2HP6VrwZQKM87p_rndjB5r14vUUluC-wpyGWqyivW7lq5JIz7Xp22PsWpWtArnnjvWUGVZ42mxSS_7o_yOh81ywIQfoHSXAaW8l5RuwJ5dI191z90JUzfhBXpz9mk2kytFBIQpGld0kdqjoNilACBlNq1AZNcMqpFFKgY4PgldOAOYa6zp124COhKuA-f94V6qPYbVYNfhJSpbnzqgq8B1GAogt7_tpKUQMQKtMjkW30ZsPAL85tLm7tJpHsxrKuLevaptqSrkfi6Elm3bNrPDv7hJfjaSYzY3cDq_aPHUzD0utlJVZlXZhApgcuM7HMIxgP2nsDI6E3i2n_MTS61OKZmx_8p9w3sTedXZzb87PLX4fiFZ_p8yU_i12yAfxCmObOf-1s9hHXEvTr |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effect+of+Zr+on+microstructure+and+properties+of+TC4+alloy+fabricated+by+laser+additive+manufacturing&rft.jtitle=Journal+of+materials+research+and+technology&rft.au=Jiang%2C+X.J.&rft.au=Bao%2C+S.J.&rft.au=Zhang%2C+L.W.&rft.au=Zhang%2C+X.Y.&rft.date=2023-05-01&rft.issn=2238-7854&rft.volume=24&rft.spage=8782&rft.epage=8792&rft_id=info:doi/10.1016%2Fj.jmrt.2023.05.137&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_jmrt_2023_05_137 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=2238-7854&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=2238-7854&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=2238-7854&client=summon |