Friction and wear properties of high temperature and low temperature sintered copper-graphite brushes at different ambient temperatures
In this paper, two resin-filled copp-graphite brushes were prepared at the sintering temperature of 450°C and 910°C respectively. The friction and wear mechanism of the brushes during the current-carrying friction process at different ambient temperatures were discussed. The results show that the fr...
Saved in:
Published in | Journal of materials research and technology Vol. 9; no. 4; pp. 7288 - 7296 |
---|---|
Main Authors | , , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier B.V
01.07.2020
Elsevier |
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | In this paper, two resin-filled copp-graphite brushes were prepared at the sintering temperature of 450°C and 910°C respectively. The friction and wear mechanism of the brushes during the current-carrying friction process at different ambient temperatures were discussed. The results show that the friction stability decreases with the increase of the ambient temperature, the friction and wear mechanism changes continuously. Compared with 450°C sintered brush, 910°C sintered brush has larger pore size and higher porosity. At high temperature condition, the cumulative oxidative wear is obvious, resulting severe wear of the brushes and commutators. The low-temperature brush has low porosity, high-temperature oxidation resistance. It shows good friction and wear performance under high ambient temperature. |
---|---|
AbstractList | In this paper, two resin-filled copp-graphite brushes were prepared at the sintering temperature of 450°C and 910°C respectively. The friction and wear mechanism of the brushes during the current-carrying friction process at different ambient temperatures were discussed. The results show that the friction stability decreases with the increase of the ambient temperature, the friction and wear mechanism changes continuously. Compared with 450°C sintered brush, 910°C sintered brush has larger pore size and higher porosity. At high temperature condition, the cumulative oxidative wear is obvious, resulting severe wear of the brushes and commutators. The low-temperature brush has low porosity, high-temperature oxidation resistance. It shows good friction and wear performance under high ambient temperature. |
Author | Lin, Xueyang Liu, Rutie Xiong, Xiang Chen, Jie Cheng, Kai |
Author_xml | – sequence: 1 givenname: Rutie surname: Liu fullname: Liu, Rutie – sequence: 2 givenname: Kai surname: Cheng fullname: Cheng, Kai – sequence: 3 givenname: Jie surname: Chen fullname: Chen, Jie email: chenjiecsu@163.com – sequence: 4 givenname: Xiang surname: Xiong fullname: Xiong, Xiang – sequence: 5 givenname: Xueyang surname: Lin fullname: Lin, Xueyang |
BookMark | eNp9kU1qHDEQhbVwIP67QFa6QHdKao26G7IJxk4MhmzitaiWSjNqZlqNJNv4BLl2NB4Tkk1WBY_3PqrqXbCzJS7E2CcBrQChP8_tfEillSChBdXCKM_YuZTd0PTDRn1k1znPACA2o4ZBnLNfdynYEuLCcXH8hTDxNcWVUgmUefR8F7Y7XuhQJSxPid58-_jyj5bDUiiR4zauVWy2CdddKMSn9JR3FYSFu-B99SyF42EKx_kXIV-xDx73ma7f5yV7vLv9efO9efjx7f7m60NjlYDSCOiV7btB6I0fOutBTKOAEaVwNCkxgdXorUBJchDkNA2jxa5DFDihnmR3ye5PXBdxNmsKB0yvJmIwb0JMW4P1drsn43SvN065UTutNFpEJclLNcm-J9_bypInlk0x50T-D0-AObZhZnNswxzbMKBMbaOGvpxCVK98DpRMtvUbllxIZEtdI_wv_hvZ_5ur |
CitedBy_id | crossref_primary_10_1016_j_jmrt_2022_05_192 crossref_primary_10_1016_j_triboint_2024_109635 crossref_primary_10_1016_j_engfailanal_2022_106698 crossref_primary_10_1016_j_jmrt_2021_02_094 crossref_primary_10_1007_s11249_024_01856_2 crossref_primary_10_1021_acsomega_2c01276 crossref_primary_10_1108_ILT_03_2024_0098 crossref_primary_10_1007_s11249_023_01825_1 crossref_primary_10_1016_j_engfailanal_2022_106205 crossref_primary_10_1016_j_jmrt_2021_09_111 crossref_primary_10_3390_lubricants10010002 crossref_primary_10_1016_j_jmrt_2021_11_053 crossref_primary_10_1115_1_4054233 crossref_primary_10_3390_en16031294 crossref_primary_10_1115_1_4056630 crossref_primary_10_1016_j_ijmecsci_2023_108133 |
Cites_doi | 10.1016/j.triboint.2007.03.005 10.1063/1.1697867 10.1016/S1003-6326(07)60281-7 10.1016/j.jallcom.2013.03.122 10.1179/pom.1997.40.3.201 10.1088/0022-3727/14/4/027 10.1007/s11249-007-9234-9 10.1016/S0924-0136(03)00476-X 10.1016/j.jallcom.2018.02.051 10.1016/j.jmatprotec.2009.05.017 |
ContentType | Journal Article |
Copyright | 2020 The Author(s) |
Copyright_xml | – notice: 2020 The Author(s) |
DBID | 6I. AAFTH AAYXX CITATION DOA |
DOI | 10.1016/j.jmrt.2020.04.092 |
DatabaseName | ScienceDirect Open Access Titles Elsevier:ScienceDirect:Open Access CrossRef DOAJ Directory of Open Access Journals |
DatabaseTitle | CrossRef |
DatabaseTitleList | |
Database_xml | – sequence: 1 dbid: DOA name: DOAJ Directory of Open Access Journals url: https://www.doaj.org/ sourceTypes: Open Website |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EndPage | 7296 |
ExternalDocumentID | oai_doaj_org_article_d6765d4d96d646acaa42ef24b277ef7c 10_1016_j_jmrt_2020_04_092 S2238785420312576 |
GroupedDBID | 0R~ 0SF 4.4 457 5VS 6I. AACTN AAEDT AAEDW AAFTH AAIKJ AALRI AAXUO ABMAC ABXRA ACGFS ADBBV ADCUG ADEZE AEXQZ AFTJW AGHFR AITUG ALMA_UNASSIGNED_HOLDINGS AMRAJ BCNDV EBS EJD FDB FNPLU GROUPED_DOAJ GX1 HH5 HZ~ IPNFZ IXB KQ8 M41 NCXOZ O9- OK1 RIG ROL SSZ AAYXX ADVLN AFJKZ CITATION |
ID | FETCH-LOGICAL-c410t-1074c738165f83cf01b9109a21deb41b0c6afc1a2e281ed6e89ca33aa1aba6b23 |
IEDL.DBID | DOA |
ISSN | 2238-7854 |
IngestDate | Tue Oct 22 15:15:35 EDT 2024 Thu Sep 26 17:24:57 EDT 2024 Wed May 17 00:08:29 EDT 2023 |
IsDoiOpenAccess | true |
IsOpenAccess | true |
IsPeerReviewed | true |
IsScholarly | true |
Issue | 4 |
Keywords | Oxidation Porosity Brush Wear |
Language | English |
License | This is an open access article under the CC BY-NC-ND license. |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c410t-1074c738165f83cf01b9109a21deb41b0c6afc1a2e281ed6e89ca33aa1aba6b23 |
OpenAccessLink | https://doaj.org/article/d6765d4d96d646acaa42ef24b277ef7c |
PageCount | 9 |
ParticipantIDs | doaj_primary_oai_doaj_org_article_d6765d4d96d646acaa42ef24b277ef7c crossref_primary_10_1016_j_jmrt_2020_04_092 elsevier_sciencedirect_doi_10_1016_j_jmrt_2020_04_092 |
PublicationCentury | 2000 |
PublicationDate | July-August 2020 2020-07-00 2020-07-01 |
PublicationDateYYYYMMDD | 2020-07-01 |
PublicationDate_xml | – month: 07 year: 2020 text: July-August 2020 |
PublicationDecade | 2020 |
PublicationTitle | Journal of materials research and technology |
PublicationYear | 2020 |
Publisher | Elsevier B.V Elsevier |
Publisher_xml | – name: Elsevier B.V – name: Elsevier |
References | Jiang, Fang, Xiao, Liu, Zhu, Wang (bib0025) 2018; 744 Lancaster, Pritchard (bib0095) 1981; 14 Samal, Parihar, Chaira (bib0020) 2013; 569 Li He, Li (bib0055) 2005; 1 Wang, Guo, Liu, Song (bib0100) 2000; 8 (bib0050) 2007 Qian, Feng, Zhang, Huang (bib0070) 2016; 45 Lin, Liu, Xiong, Chen (bib0015) 2017; 27 Savage (bib0090) 1948; 1 Jaroslav, Štefan, Jozef, L’ubomír (bib0030) 2007; 265 Rajkumar, Aravindan (bib0065) 2009; 209 Moustafa, El-Badry, Sanad (bib0010) 1997; 40 Lu (bib0075) 1988 Xia, Zhong-Liang, Chen (bib0040) 2007; 17 Yasar, Canakci, Arslan (bib0005) 2007; 40 Keun, Ui, Kang, Ho (bib0045) 2007; 27 Hu, Xia, Chen, Ding (bib0080) 2007; 02 Ruan, Huang (bib0085) 2012 Cheng, Liu, Xiong, Lin, Chen (bib0060) 2019; 8 Garcı́A-Márquez, Antón, Jimenez (bib0035) 2003; 143–144 Jaroslav (10.1016/j.jmrt.2020.04.092_bib0030) 2007; 265 (10.1016/j.jmrt.2020.04.092_bib0050) 2007 Rajkumar (10.1016/j.jmrt.2020.04.092_bib0065) 2009; 209 Samal (10.1016/j.jmrt.2020.04.092_bib0020) 2013; 569 Cheng (10.1016/j.jmrt.2020.04.092_bib0060) 2019; 8 Lancaster (10.1016/j.jmrt.2020.04.092_bib0095) 1981; 14 Lin (10.1016/j.jmrt.2020.04.092_bib0015) 2017; 27 Hu (10.1016/j.jmrt.2020.04.092_bib0080) 2007; 02 Xia (10.1016/j.jmrt.2020.04.092_bib0040) 2007; 17 Qian (10.1016/j.jmrt.2020.04.092_bib0070) 2016; 45 Ruan (10.1016/j.jmrt.2020.04.092_bib0085) 2012 Wang (10.1016/j.jmrt.2020.04.092_bib0100) 2000; 8 Moustafa (10.1016/j.jmrt.2020.04.092_bib0010) 1997; 40 Lu (10.1016/j.jmrt.2020.04.092_bib0075) 1988 Jiang (10.1016/j.jmrt.2020.04.092_bib0025) 2018; 744 Garcı́A-Márquez (10.1016/j.jmrt.2020.04.092_bib0035) 2003; 143–144 Keun (10.1016/j.jmrt.2020.04.092_bib0045) 2007; 27 Li He (10.1016/j.jmrt.2020.04.092_bib0055) 2005; 1 Yasar (10.1016/j.jmrt.2020.04.092_bib0005) 2007; 40 Savage (10.1016/j.jmrt.2020.04.092_bib0090) 1948; 1 |
References_xml | – volume: 40 start-page: 201 year: 1997 end-page: 206 ident: bib0010 article-title: Effect of Graphite with and Without Copper Coating on Consolidation Behaviour and Sintering of Copper“Graphite Composite publication-title: Powder Metall contributor: fullname: Sanad – volume: 27 start-page: 1411 year: 2017 end-page: 1417 ident: bib0015 article-title: Effects of graphite granularity and pitch binder on properties of copper-graphite brush publication-title: The Chinese Journal of Nonferrous Metals contributor: fullname: Chen – volume: 02 start-page: 31 year: 2007 end-page: 34 ident: bib0080 article-title: Influence of bulk temperature of brushed on wear properties of brushed for high-speed micromotors publication-title: Carbon contributor: fullname: Ding – volume: 8 start-page: 15 year: 2000 end-page: 17 ident: bib0100 article-title: Adhesive Shear Strength and Electrical Conductivity of Graphite Bonded by Adhesives of Phenol-formaldehyde Resin Modified by Silicon publication-title: Engineering Materials contributor: fullname: Song – volume: 27 start-page: 301 year: 2007 end-page: 306 ident: bib0045 article-title: Tribological properties and electrical signal transmission of copper–Graphite composites publication-title: Tribol Lett contributor: fullname: Ho – volume: 209 start-page: 5601 year: 2009 end-page: 5605 ident: bib0065 article-title: Microwave sintering of copper–graphite composites publication-title: Journal of Materials Processing Tech contributor: fullname: Aravindan – volume: 1 start-page: 1 year: 2005 end-page: 5 ident: bib0055 article-title: Review on temperature computation and application in electric machines publication-title: Journal of North China Electric Power University contributor: fullname: Li – volume: 8 start-page: 67 year: 2019 end-page: 77 ident: bib0060 article-title: The effect of sintering temperature on the microstructures and properties of resin‑bonded copper-graphite brush materials publication-title: Tribol Lett contributor: fullname: Chen – volume: 40 start-page: 1381 year: 2007 end-page: 1386 ident: bib0005 article-title: The effect of brush spring pressure on the wear behaviour of copper–graphite brushes with electrical current publication-title: Tribol Int contributor: fullname: Arslan – volume: 17 start-page: 1380 year: 2007 end-page: 1384 ident: bib0040 article-title: Preparation of carbon brushes with thermosetting resin binder publication-title: Trans Nonferrous Met Soc China contributor: fullname: Chen – volume: 143–144 start-page: 290 year: 2003 end-page: 293 ident: bib0035 article-title: Viability study and mechanical characterisation of copper–graphite electrical contacts produced by adhesive joining publication-title: Journal of Materials Processing Tech contributor: fullname: Jimenez – volume: 744 start-page: 165 year: 2018 end-page: 173 ident: bib0025 article-title: Influence of carbon coating with phenolic resin in natural graphite on the microstructures and properties of graphite/copper composites publication-title: J Alloys Compd contributor: fullname: Wang – year: 1988 ident: bib0075 article-title: Engineering radiant heat transfer contributor: fullname: Lu – year: 2012 ident: bib0085 article-title: Principles of powder metallurgy contributor: fullname: Huang – volume: 1 start-page: 1 year: 1948 end-page: 10 ident: bib0090 article-title: Graphite lubricatin publication-title: J.Appl. Phys. contributor: fullname: Savage – volume: 569 start-page: 95 year: 2013 end-page: 101 ident: bib0020 article-title: The effect of milling and sintering techniques on mechanical properties of Cu–graphite metal matrix composite prepared by powder metallurgy route publication-title: J Alloys Compd contributor: fullname: Chaira – volume: 14 start-page: 747 year: 1981 end-page: 762 ident: bib0095 article-title: The influence of environment and pressure on the transition to dusting wear of g raphite publication-title: J. Phy s. D: Appl. Phys. contributor: fullname: Pritchard – year: 2007 ident: bib0050 article-title: D.H. C/O morganite E. Carbon Ltd. Sidgwick. Composite electrical brush construction. US – volume: 265 start-page: 417 year: 2007 end-page: 421 ident: bib0030 article-title: Effect of composition on friction coefficient of Cu-graphite composites publication-title: Wear contributor: fullname: L’ubomír – volume: 45 start-page: 7 year: 2016 end-page: 12 ident: bib0070 article-title: Review on research of Cu-based self-lubricating electrical contact composite publication-title: Surf Technol contributor: fullname: Huang – volume: 40 start-page: 1381 issue: 9 year: 2007 ident: 10.1016/j.jmrt.2020.04.092_bib0005 article-title: The effect of brush spring pressure on the wear behaviour of copper–graphite brushes with electrical current publication-title: Tribol Int doi: 10.1016/j.triboint.2007.03.005 contributor: fullname: Yasar – volume: 1 start-page: 1 year: 1948 ident: 10.1016/j.jmrt.2020.04.092_bib0090 article-title: Graphite lubricatin publication-title: J.Appl. Phys. doi: 10.1063/1.1697867 contributor: fullname: Savage – volume: 17 start-page: 1380 issue: 6 year: 2007 ident: 10.1016/j.jmrt.2020.04.092_bib0040 article-title: Preparation of carbon brushes with thermosetting resin binder publication-title: Trans Nonferrous Met Soc China doi: 10.1016/S1003-6326(07)60281-7 contributor: fullname: Xia – year: 2007 ident: 10.1016/j.jmrt.2020.04.092_bib0050 – volume: 569 start-page: 95 year: 2013 ident: 10.1016/j.jmrt.2020.04.092_bib0020 article-title: The effect of milling and sintering techniques on mechanical properties of Cu–graphite metal matrix composite prepared by powder metallurgy route publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2013.03.122 contributor: fullname: Samal – volume: 27 start-page: 1411 issue: 7 year: 2017 ident: 10.1016/j.jmrt.2020.04.092_bib0015 article-title: Effects of graphite granularity and pitch binder on properties of copper-graphite brush publication-title: The Chinese Journal of Nonferrous Metals contributor: fullname: Lin – volume: 40 start-page: 201 issue: 3 year: 1997 ident: 10.1016/j.jmrt.2020.04.092_bib0010 article-title: Effect of Graphite with and Without Copper Coating on Consolidation Behaviour and Sintering of Copper“Graphite Composite publication-title: Powder Metall doi: 10.1179/pom.1997.40.3.201 contributor: fullname: Moustafa – volume: 1 start-page: 1 year: 2005 ident: 10.1016/j.jmrt.2020.04.092_bib0055 article-title: Review on temperature computation and application in electric machines publication-title: Journal of North China Electric Power University contributor: fullname: Li He – volume: 45 start-page: 7 issue: 1 year: 2016 ident: 10.1016/j.jmrt.2020.04.092_bib0070 article-title: Review on research of Cu-based self-lubricating electrical contact composite publication-title: Surf Technol contributor: fullname: Qian – volume: 14 start-page: 747 year: 1981 ident: 10.1016/j.jmrt.2020.04.092_bib0095 article-title: The influence of environment and pressure on the transition to dusting wear of g raphite publication-title: J. Phy s. D: Appl. Phys. doi: 10.1088/0022-3727/14/4/027 contributor: fullname: Lancaster – volume: 8 start-page: 67 year: 2019 ident: 10.1016/j.jmrt.2020.04.092_bib0060 article-title: The effect of sintering temperature on the microstructures and properties of resin‑bonded copper-graphite brush materials publication-title: Tribol Lett contributor: fullname: Cheng – year: 1988 ident: 10.1016/j.jmrt.2020.04.092_bib0075 contributor: fullname: Lu – volume: 8 start-page: 15 year: 2000 ident: 10.1016/j.jmrt.2020.04.092_bib0100 article-title: Adhesive Shear Strength and Electrical Conductivity of Graphite Bonded by Adhesives of Phenol-formaldehyde Resin Modified by Silicon publication-title: Engineering Materials contributor: fullname: Wang – volume: 27 start-page: 301 year: 2007 ident: 10.1016/j.jmrt.2020.04.092_bib0045 article-title: Tribological properties and electrical signal transmission of copper–Graphite composites publication-title: Tribol Lett doi: 10.1007/s11249-007-9234-9 contributor: fullname: Keun – volume: 02 start-page: 31 year: 2007 ident: 10.1016/j.jmrt.2020.04.092_bib0080 article-title: Influence of bulk temperature of brushed on wear properties of brushed for high-speed micromotors publication-title: Carbon contributor: fullname: Hu – volume: 143–144 start-page: 290 issue: 1 year: 2003 ident: 10.1016/j.jmrt.2020.04.092_bib0035 article-title: Viability study and mechanical characterisation of copper–graphite electrical contacts produced by adhesive joining publication-title: Journal of Materials Processing Tech doi: 10.1016/S0924-0136(03)00476-X contributor: fullname: Garcı́A-Márquez – year: 2012 ident: 10.1016/j.jmrt.2020.04.092_bib0085 contributor: fullname: Ruan – volume: 744 start-page: 165 year: 2018 ident: 10.1016/j.jmrt.2020.04.092_bib0025 article-title: Influence of carbon coating with phenolic resin in natural graphite on the microstructures and properties of graphite/copper composites publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2018.02.051 contributor: fullname: Jiang – volume: 265 start-page: 417 year: 2007 ident: 10.1016/j.jmrt.2020.04.092_bib0030 article-title: Effect of composition on friction coefficient of Cu-graphite composites publication-title: Wear contributor: fullname: Jaroslav – volume: 209 start-page: 5601 issue: 15–16 year: 2009 ident: 10.1016/j.jmrt.2020.04.092_bib0065 article-title: Microwave sintering of copper–graphite composites publication-title: Journal of Materials Processing Tech doi: 10.1016/j.jmatprotec.2009.05.017 contributor: fullname: Rajkumar |
SSID | ssj0001596081 |
Score | 2.3176677 |
Snippet | In this paper, two resin-filled copp-graphite brushes were prepared at the sintering temperature of 450°C and 910°C respectively. The friction and wear... |
SourceID | doaj crossref elsevier |
SourceType | Open Website Aggregation Database Publisher |
StartPage | 7288 |
SubjectTerms | Brush Oxidation Porosity Wear |
SummonAdditionalLinks | – databaseName: Elsevier Free Content dbid: IXB link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1NT9wwELUQp3JAtKVioVQ-9IaijR3bcY6AWKFK7QWQ9maNP1IWwWaVzYqfwN-ux0no7qWHHjOynWhmMvPizDwT8l3ngSvvWKal9PiBUsV3zvtMBRAWLOdV4un--UvdPogfcznfI9djLwyWVQ6xv4_pKVoPkumgzelqsZjexcSmSy0Fj36JsDnGYeT2xCa--dXffRYZMXo6qxTHZzhh6J3py7yeXlosqeR5z3jKd_JTovHfSlNbqWd2RA4HzEgv-8f6SPbC8hM52GIS_EzeZu0idShQWHr6Gt2XrnCbvUW-VNrUFGmJKfJQDSTKadxz87ojWyN5RBs8dc0qCrPEZh0xKbXtZv0YF4KOjieqdBReLDZTbq-wPiYPs5v769tsOGMhc4LlXYb1mK7Ev4ey1oWrc2YjgKiAMx-sYDZ3CmrHgAeuWfAq6MpBUQAwsKAsL76Q_WWzDCeEFgJAi1pYVyEFZURCWktVCURtrLDlhFyMmjWrnkrDjDVmTwbtYNAOJhcm2mFCrlD57yORBjsJmva3GfzAeFUq6YWvlFdCgQMQPNRcWF6WoS7dhMjRdGbHq-JSi3_c_PQ_552RD3jVl_N-JftduwnnEbR09lvyyj_Jdeyt priority: 102 providerName: Elsevier |
Title | Friction and wear properties of high temperature and low temperature sintered copper-graphite brushes at different ambient temperatures |
URI | https://dx.doi.org/10.1016/j.jmrt.2020.04.092 https://doaj.org/article/d6765d4d96d646acaa42ef24b277ef7c |
Volume | 9 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV1LT9wwELYQJ3pAhbZiy0M-9FZFxI7tOEdArKBSObHS3qzxIyqo7K6yQfwE_jYeO1tlL_TCJYeRNY5mJpnPycw3hPzQZeDKO1ZoKT0eUJr4zHlfqADCguW8STzdv-_UzUz8msv5aNQX1oRleuBsuHOvaiW98I3ySihwAIKHlgvL6zq0tUtvXyZHh6ncHxyReZpQGtOfLmotxdAxk4u7Hp86LKTkZeY55VtZKZH3j5LTKOFMP5P9ASnSi3yHB2QnLA7JpxF_4BfyOu0eUl8ChYWnLzFo6Qo_rnfIkkqXLUUyYorsUwN1clr3d_myJVsjZUQXPHXLVRQWicM6IlFqu-f1n6gIerqZo9JTeLLYQjnWsP5KZtPr-6ubYpisUDjByr7AKkxX4z9D2erKtSWzETY0wJkPVjBbOgWtY8AD1yx4FXTjoKoAGFhQllffyO5iuQhHhFYCQItWWNcg8WTEP1pL1QjEaqyy9YT83FjWrDKBhtlUlj0a9INBP5hSmOiHCblE4_9bieTXSRBDwgwhYf4XEhMiN64zA47I-CCqenhn8-8fsfkx2UOVuaL3hOz23XM4jbilt2cpROP1dn75Bt5D7iQ |
link.rule.ids | 315,786,790,870,2115,3525,27955,27956,45907 |
linkProvider | Directory of Open Access Journals |
linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1Lb9QwELZKOQCHiqdYWsAHbija2LEd59hWrBZoe6GV9maNH4Gt6GaVTdWf0L9dj5PA7oUD14nHiTwTz2d75jMhn3QeuPKOZVpKjwuUKv5z3mcqgLBgOa8ST_f5hZpfiW8Ludgjp2MtDKZVDnN_P6en2XqQTIfRnK6Xy-mPGNh0qaXg0S8RNj8ij4WMaz2s4luc_N1okRGkp8tKUSFDjaF4ps_zur5pMaeS5z3lKd8JUInHfytObcWe2XNyMIBGetx_1wuyF1YvybMtKsFX5H7WLlOJAoWVp3fRf-ka99lbJEylTU2Rl5giEdXAopza_W7udmQbZI9og6euWUdhluisIyiltr3d_IodQUfHK1U6CjcWqym3e9i8JlezL5en82y4ZCFzguVdhgmZrsTjQ1nrwtU5sxFBVMCZD1YwmzsFtWPAA9cseBV05aAoABhYUJYXb8j-qlmFt4QWAkCLWlhXIQdlhEJaS1UJhG2ssOWEfB5H1qx7Lg0zJpldG7SDQTuYXJhohwk5wcH_0xJ5sJOgaX-awRGMV6WSXvhKeSUUOADBQ82F5WUZ6tJNiBxNZ3bcKna1_MfL3_2n3kfyZH55fmbOvl58PyRP8Umf23tE9rv2NryPCKazH5KHPgDDzO_S |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Friction+and+wear+properties+of+high+temperature+and+low+temperature+sintered+copper-graphite+brushes+at+different+ambient+temperatures&rft.jtitle=Journal+of+materials+research+and+technology&rft.au=Rutie+Liu&rft.au=Kai+Cheng&rft.au=Jie+Chen&rft.au=Xiang+Xiong&rft.date=2020-07-01&rft.pub=Elsevier&rft.issn=2238-7854&rft.volume=9&rft.issue=4&rft.spage=7288&rft.epage=7296&rft_id=info:doi/10.1016%2Fj.jmrt.2020.04.092&rft.externalDBID=DOA&rft.externalDocID=oai_doaj_org_article_d6765d4d96d646acaa42ef24b277ef7c |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=2238-7854&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=2238-7854&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=2238-7854&client=summon |