Precipitation of M23C6 and its effect on tensile properties of 0.3C–20Cr–11Mn–1Mo–0.35N steel
[Display omitted] •Intergranular M23C6 grew along grain boundaries to form film-shaped morphology.•Cellular precipitation of M23C6 is controlled by the long-range diffusion of C.•Intragranular M23C6 nucleating on dislocations exhibited stinger morphologies.•M23C6 improved strength modestly, however,...
Saved in:
Published in | Materials in engineering Vol. 78; pp. 42 - 50 |
---|---|
Main Authors | , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier Ltd
05.08.2015
|
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | [Display omitted]
•Intergranular M23C6 grew along grain boundaries to form film-shaped morphology.•Cellular precipitation of M23C6 is controlled by the long-range diffusion of C.•Intragranular M23C6 nucleating on dislocations exhibited stinger morphologies.•M23C6 improved strength modestly, however, degraded ductility obviously.
The precipitation behavior of M23C6 carbides and its influence on the tensile properties were investigated in a novel 0.3C–20Cr–11Mn–1Mo–0.35N austenitic stainless steel isothermally aged at 900°C. It was found that typical M23C6 carbides retaining a cube-on-cube crystallographic relation with austenite matrix precipitated on grain boundaries, twin boundaries and dislocations. With increasing aging time, the intergranular M23C6 carbides grew along the grain boundaries and into the adjacent austenite grain to form a film-shaped morphology. The precipitation of cellular M23C6 carbides on grain boundaries was a discontinuous reaction involving both the diffusion of C and Cr. And the formation of lamellar M23C6 carbides on incoherent twin boundaries associated with the gliding of partial dislocations and the formation of stacking faults. Meanwhile, the intragranular M23C6 carbides in rectangular or rhombic shapes initially nucleated on dislocations, and finally arranged in stringers corner-to-corner or face-to-face. The strength of the material was modestly improved by the precipitation of M23C6 carbides, although the strengthening effect was weakened by the dominant precipitation of cellular M23C6 after long-term aging duration. However, the ductility was significantly deteriorated by the intergranular and cellular M23C6. |
---|---|
AbstractList | The precipitation behavior of M23C6 carbides and its influence on the tensile properties were investigated in a novel 0.3C-20Cr-11Mn-1Mo-0.35N austenitic stainless steel isothermally aged at 900 degree C. It was found that typical M23C6 carbides retaining a cube-on-cube crystallographic relation with austenite matrix precipitated on grain boundaries, twin boundaries and dislocations. With increasing aging time, the intergranular M23C6 carbides grew along the grain boundaries and into the adjacent austenite grain to form a film-shaped morphology. The precipitation of cellular M23C6 carbides on grain boundaries was a discontinuous reaction involving both the diffusion of C and Cr. And the formation of lamellar M23C6 carbides on incoherent twin boundaries associated with the gliding of partial dislocations and the formation of stacking faults. Meanwhile, the intragranular M23C6 carbides in rectangular or rhombic shapes initially nucleated on dislocations, and finally arranged in stringers corner-to-corner or face-to-face. The strength of the material was modestly improved by the precipitation of M23C6 carbides, although the strengthening effect was weakened by the dominant precipitation of cellular M23C6 after long-term aging duration. However, the ductility was significantly deteriorated by the intergranular and cellular M23C6. [Display omitted] •Intergranular M23C6 grew along grain boundaries to form film-shaped morphology.•Cellular precipitation of M23C6 is controlled by the long-range diffusion of C.•Intragranular M23C6 nucleating on dislocations exhibited stinger morphologies.•M23C6 improved strength modestly, however, degraded ductility obviously. The precipitation behavior of M23C6 carbides and its influence on the tensile properties were investigated in a novel 0.3C–20Cr–11Mn–1Mo–0.35N austenitic stainless steel isothermally aged at 900°C. It was found that typical M23C6 carbides retaining a cube-on-cube crystallographic relation with austenite matrix precipitated on grain boundaries, twin boundaries and dislocations. With increasing aging time, the intergranular M23C6 carbides grew along the grain boundaries and into the adjacent austenite grain to form a film-shaped morphology. The precipitation of cellular M23C6 carbides on grain boundaries was a discontinuous reaction involving both the diffusion of C and Cr. And the formation of lamellar M23C6 carbides on incoherent twin boundaries associated with the gliding of partial dislocations and the formation of stacking faults. Meanwhile, the intragranular M23C6 carbides in rectangular or rhombic shapes initially nucleated on dislocations, and finally arranged in stringers corner-to-corner or face-to-face. The strength of the material was modestly improved by the precipitation of M23C6 carbides, although the strengthening effect was weakened by the dominant precipitation of cellular M23C6 after long-term aging duration. However, the ductility was significantly deteriorated by the intergranular and cellular M23C6. |
Author | Zheng, Leigang Hu, Xiaoqiang Li, Dianzhong Kang, Xiuhong |
Author_xml | – sequence: 1 givenname: Leigang surname: Zheng fullname: Zheng, Leigang – sequence: 2 givenname: Xiaoqiang orcidid: 0000-0003-1780-6978 surname: Hu fullname: Hu, Xiaoqiang email: xqhu@imr.ac.cn – sequence: 3 givenname: Xiuhong surname: Kang fullname: Kang, Xiuhong – sequence: 4 givenname: Dianzhong surname: Li fullname: Li, Dianzhong |
BookMark | eNqFkT1OAzEQhV0EiSRwA4otabLM2PsXCiS04k9KgAJqy_GOJUeb3WA7SHTcgRtyEhxtKgpo5kkz741G30zYqOs7YuwMIUXA4mKdblRoyKccME8hS2NzxMbAC5wJKObHbOL9GgBLRD5m9OxI260NKti-S3qTLLmoi0R1TWKDT8gY0iGJo0Cdty0lW9dvyQVLfu-GVNTfn18cahcFcdntZdnHGkf5Y-IDUXvCjoxqPZ0edMpeb29e6vvZ4unuob5ezHQGeZiZnFNBhFw3RLriq3lGQpdKlCCqqsAVrJoiN43CCgSvxJxMxQ3XgJCbVV6KKTsf9sYj33bkg9xYr6ltVUf9zkssS-Al5xVGazZYteu9d2Tk1tmNch8SQe5JyrUcSMo9SQmZjM0Yu_wV0wd2wSnb_he-GsIUGbxbctJrS52mxsYvBNn09u8FPwZFlxY |
CitedBy_id | crossref_primary_10_1016_j_msea_2020_140084 crossref_primary_10_3390_ma12182944 crossref_primary_10_1016_j_msea_2017_11_066 crossref_primary_10_1016_j_msea_2022_143832 crossref_primary_10_1016_j_scriptamat_2022_114597 crossref_primary_10_1002_srin_202300248 crossref_primary_10_1016_j_matchar_2021_111020 crossref_primary_10_1016_j_msea_2016_06_034 crossref_primary_10_1007_s11661_017_4462_6 crossref_primary_10_3390_met13020403 crossref_primary_10_1016_j_jmrt_2024_12_010 crossref_primary_10_1016_j_jmst_2024_04_087 crossref_primary_10_1016_j_actamat_2023_119518 crossref_primary_10_1016_j_mtcomm_2023_106679 crossref_primary_10_1021_acsami_0c03527 crossref_primary_10_1016_j_mtla_2018_10_010 crossref_primary_10_1016_j_intermet_2021_107271 crossref_primary_10_1016_j_matchar_2017_04_018 crossref_primary_10_1016_j_msea_2020_140514 crossref_primary_10_1016_j_matchar_2019_01_030 crossref_primary_10_1017_S1431927619013989 crossref_primary_10_1016_j_msea_2019_01_050 crossref_primary_10_1016_j_intermet_2023_108125 crossref_primary_10_1016_j_corsci_2023_111208 crossref_primary_10_1016_j_msea_2022_142676 crossref_primary_10_1016_j_scriptamat_2018_05_004 crossref_primary_10_1007_s11663_021_02327_y crossref_primary_10_1016_j_jmrt_2023_12_009 crossref_primary_10_1016_j_mtcomm_2022_103778 crossref_primary_10_1016_j_jallcom_2019_07_025 crossref_primary_10_1016_j_matchar_2021_111072 crossref_primary_10_1016_j_jallcom_2022_164013 crossref_primary_10_1007_s12540_017_6516_0 crossref_primary_10_1016_j_mtla_2021_101117 crossref_primary_10_1016_j_surfcoat_2024_130862 crossref_primary_10_1007_s40195_020_01076_2 crossref_primary_10_1007_s12540_024_01794_7 crossref_primary_10_1016_j_mtcomm_2023_107996 crossref_primary_10_1016_j_matchar_2018_01_040 crossref_primary_10_1016_j_matchar_2021_111628 crossref_primary_10_1016_j_matdes_2024_112891 crossref_primary_10_2139_ssrn_4059731 crossref_primary_10_1016_j_jmst_2023_11_053 crossref_primary_10_1016_j_mtla_2025_102335 crossref_primary_10_1016_j_jmst_2021_10_008 crossref_primary_10_1088_2053_1591_ac5cad crossref_primary_10_3390_met12040537 crossref_primary_10_1016_j_fusengdes_2023_114053 crossref_primary_10_1007_s42243_022_00866_5 crossref_primary_10_1016_j_ijrmhm_2022_105985 crossref_primary_10_1016_j_matdes_2024_112928 crossref_primary_10_1016_j_msea_2019_138568 crossref_primary_10_1016_j_surfcoat_2024_131689 crossref_primary_10_1016_j_surfcoat_2017_04_013 crossref_primary_10_1007_s10853_016_9941_4 crossref_primary_10_1016_j_jallcom_2017_11_166 crossref_primary_10_1016_j_matchar_2025_114907 crossref_primary_10_1016_j_ijhydene_2019_10_227 crossref_primary_10_1016_j_msea_2016_10_074 crossref_primary_10_1016_j_mtla_2019_100330 crossref_primary_10_1016_j_nanoms_2019_12_003 crossref_primary_10_1016_j_matdes_2015_06_103 crossref_primary_10_1016_j_msea_2022_144077 crossref_primary_10_1088_2053_1591_ab5f73 crossref_primary_10_3139_146_111823 crossref_primary_10_1007_s11661_016_3656_7 crossref_primary_10_1007_s42243_019_00227_9 crossref_primary_10_1016_j_matdes_2019_107849 crossref_primary_10_1007_s11663_022_02681_5 crossref_primary_10_3390_met12010116 crossref_primary_10_1002_srin_201700135 crossref_primary_10_1016_j_ijpvp_2024_105294 crossref_primary_10_1016_j_matdes_2023_111841 crossref_primary_10_1016_j_matchar_2019_05_025 crossref_primary_10_1080_09603409_2021_1936893 crossref_primary_10_3390_ma14164411 crossref_primary_10_1007_s10853_020_04690_8 crossref_primary_10_1016_j_jallcom_2022_167504 crossref_primary_10_1016_j_jnucmat_2025_155716 crossref_primary_10_1016_S1003_6326_24_66514_3 crossref_primary_10_1016_j_matdes_2019_107843 crossref_primary_10_1088_1742_6596_2891_14_142019 crossref_primary_10_1016_j_surfcoat_2021_128076 crossref_primary_10_1016_j_jmatprotec_2017_02_007 crossref_primary_10_1016_j_fusengdes_2023_113645 crossref_primary_10_1016_j_matchar_2018_07_038 crossref_primary_10_1080_2374068X_2022_2036443 crossref_primary_10_1007_s11661_022_06656_8 crossref_primary_10_1016_j_matchar_2024_113968 |
Cites_doi | 10.1179/1743284713Y.0000000347 10.1080/14786430701805590 10.1007/s11661-014-2377-z 10.1016/j.matdes.2012.01.024 10.1016/j.scriptamat.2011.06.010 10.1016/0001-6160(65)90053-2 10.1007/BF01151525 10.1016/0921-5093(91)90273-P 10.1007/s11661-015-2771-1 10.1016/j.matdes.2014.06.069 10.1016/0036-9748(87)90191-8 10.1016/j.matdes.2014.07.063 10.1016/0001-6160(67)90159-9 10.1016/0001-6160(67)90134-4 10.1179/030634583790420871 10.1007/BF03220991 10.1007/BF02652845 10.1007/BF02647659 10.1016/0001-6160(59)90047-1 10.1023/A:1004390029071 10.1016/j.actamat.2011.06.038 10.1007/BF01132012 10.1016/j.matdes.2011.03.055 10.1016/j.scriptamat.2009.03.018 10.1016/j.msea.2012.01.076 10.1016/0001-6160(68)90050-3 10.1007/s12613-010-0381-x 10.1007/s11661-011-0924-4 10.1016/j.msea.2012.08.108 10.2355/isijinternational.41.641 10.1016/j.msec.2014.10.078 10.1007/BF02670680 |
ContentType | Journal Article |
Copyright | 2015 Elsevier Ltd |
Copyright_xml | – notice: 2015 Elsevier Ltd |
DBID | AAYXX CITATION 7QQ 7SR 8BQ 8FD JG9 |
DOI | 10.1016/j.matdes.2015.04.016 |
DatabaseName | CrossRef Ceramic Abstracts Engineered Materials Abstracts METADEX Technology Research Database Materials Research Database |
DatabaseTitle | CrossRef Materials Research Database Engineered Materials Abstracts Ceramic Abstracts Technology Research Database METADEX |
DatabaseTitleList | Materials Research Database |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EndPage | 50 |
ExternalDocumentID | 10_1016_j_matdes_2015_04_016 S0261306915001922 |
GroupedDBID | -~X 8P~ 9JN AABNK AACTN AAEDT AAEDW AAEPC AAKOC AALRI AAOAW AAXUO ABMAC ABXRA ABYKQ ACDAQ ACRLP ADTZH AEBSH AECPX AFKWA AFTJW AGHFR AGUBO AGYEJ AIEXJ AIKHN AITUG AJBFU ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BKOJK BLXMC EFJIC EO8 EO9 EP2 EP3 FDB FIRID FYGXN M24 M41 OAUVE Q38 SDF SPC SSM SST SSZ T5K 4G. 5VS 7-5 AAQXK AATTM AAXKI AAYWO AAYXX ABEFU ABFNM ABWVN ABXDB ACNNM ACRPL ACVFH ADCNI ADMUD ADNMO AEIPS AEUPX AFPUW AGCQF AGQPQ AGRNS AHHHB AIGII AIIUN AKBMS AKRWK AKYEP ANKPU AZFZN CITATION FGOYB G-2 IHE J1W R2- ROL SMS SSH 7QQ 7SR 8BQ 8FD AFXIZ JG9 |
ID | FETCH-LOGICAL-c405t-f52e6ee12cdeec82b94e3c7a37038861b0bd65fda18032839ef82f2c0105fb573 |
IEDL.DBID | AIKHN |
ISSN | 0261-3069 |
IngestDate | Fri Jul 11 05:58:43 EDT 2025 Tue Jul 01 04:23:15 EDT 2025 Thu Apr 24 22:54:16 EDT 2025 Fri Feb 23 02:25:12 EST 2024 |
IsPeerReviewed | true |
IsScholarly | true |
Keywords | M23C6 carbide Aging treatment Cr–Mn–N austenitic steel Tensile properties |
Language | English |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c405t-f52e6ee12cdeec82b94e3c7a37038861b0bd65fda18032839ef82f2c0105fb573 |
Notes | ObjectType-Article-1 SourceType-Scholarly Journals-1 ObjectType-Feature-2 content type line 23 |
ORCID | 0000-0003-1780-6978 |
PQID | 1770272281 |
PQPubID | 23500 |
PageCount | 9 |
ParticipantIDs | proquest_miscellaneous_1770272281 crossref_primary_10_1016_j_matdes_2015_04_016 crossref_citationtrail_10_1016_j_matdes_2015_04_016 elsevier_sciencedirect_doi_10_1016_j_matdes_2015_04_016 |
ProviderPackageCode | CITATION AAYXX |
PublicationCentury | 2000 |
PublicationDate | 2015-08-05 |
PublicationDateYYYYMMDD | 2015-08-05 |
PublicationDate_xml | – month: 08 year: 2015 text: 2015-08-05 day: 05 |
PublicationDecade | 2010 |
PublicationTitle | Materials in engineering |
PublicationYear | 2015 |
Publisher | Elsevier Ltd |
Publisher_xml | – name: Elsevier Ltd |
References | Weiss, Stickler (b0105) 1972; 3 Presser, Silcock (b0125) 1983; 17 Votava, Berghezan (b0140) 1959; 7 Singhal, Martin (b0080) 1968; 16 Behjati, Kermanpur, Najafizadeh, Baghbadorani, Karjalainen, Jung (b0010) 2014; 63 Wang, Ni, Xiao, Ma, Wang, Yang (b0015) 2014; 64 Simmons (b0145) 1995; 26 Hong, Shi, Sheng, Cao, Hui, Dong (b0055) 2011; 32 Moon, Lee, Hong (b0030) 2015; 46 Beckitt, Clark (b0075) 1967; 15 Lewis, Hattersley (b0065) 1965; 13 Hamada, Karjalainen, Misra, Talonen (b0040) 2013; 559 Vanderschaeve, Taillard, Foct (b0130) 1995; 30 Maruyama, Sawada, Koike (b0150) 2001; 41 Jiang, Zhu (b0155) 2012; 539 Rosenfield, Hahn, Embury (b0160) 1972; 3 Singhal, Martin (b0070) 1967; 15 Carvalho, Machado, Solórzano, Padilha (b0120) 2008; 88 Kikuchi, Kajihara, Choi (b0100) 1991; 146 Chandra Holm, Uggowitzer, Speidel (b0050) 1987; 21 Ha, Lee, Oh, Kim (b0045) 2009; 61 Werner (b0020) 1988; 101 Roncery, Weber, Theisen (b0090) 2011; 59 Trillo, Murr (b0110) 1998; 33 Jiang, Zhang, Li, Li, Ma (b0165) 2010; 17 Talha, Behera, Sinha (b0005) 2015; 47 Wang, Sheng, Hong (b0060) 2012; 37 Bai, Pan, Chen, Liu, Wang, Zhang, Tang (b0095) 2014; 30 Voice, Faulkner (b0135) 1987; 22 Gu, Michal, Ernst, Kahn, Heuer (b0025) 2014; 45 Lee, Ha, Kim (b0085) 2011; 42 Reed (b0035) 1989; 41 Kaneko, Fukunaga, Yamada, Nakada, Kikuchi, Saghi, Barnard, Midgley (b0115) 2011; 65 Jiang (10.1016/j.matdes.2015.04.016_b0155) 2012; 539 Presser (10.1016/j.matdes.2015.04.016_b0125) 1983; 17 Lewis (10.1016/j.matdes.2015.04.016_b0065) 1965; 13 Kaneko (10.1016/j.matdes.2015.04.016_b0115) 2011; 65 Werner (10.1016/j.matdes.2015.04.016_b0020) 1988; 101 Hong (10.1016/j.matdes.2015.04.016_b0055) 2011; 32 Wang (10.1016/j.matdes.2015.04.016_b0060) 2012; 37 Votava (10.1016/j.matdes.2015.04.016_b0140) 1959; 7 Jiang (10.1016/j.matdes.2015.04.016_b0165) 2010; 17 Weiss (10.1016/j.matdes.2015.04.016_b0105) 1972; 3 Maruyama (10.1016/j.matdes.2015.04.016_b0150) 2001; 41 Gu (10.1016/j.matdes.2015.04.016_b0025) 2014; 45 Beckitt (10.1016/j.matdes.2015.04.016_b0075) 1967; 15 Vanderschaeve (10.1016/j.matdes.2015.04.016_b0130) 1995; 30 Rosenfield (10.1016/j.matdes.2015.04.016_b0160) 1972; 3 Chandra Holm (10.1016/j.matdes.2015.04.016_b0050) 1987; 21 Talha (10.1016/j.matdes.2015.04.016_b0005) 2015; 47 Singhal (10.1016/j.matdes.2015.04.016_b0070) 1967; 15 Voice (10.1016/j.matdes.2015.04.016_b0135) 1987; 22 Simmons (10.1016/j.matdes.2015.04.016_b0145) 1995; 26 Carvalho (10.1016/j.matdes.2015.04.016_b0120) 2008; 88 Moon (10.1016/j.matdes.2015.04.016_b0030) 2015; 46 Behjati (10.1016/j.matdes.2015.04.016_b0010) 2014; 63 Reed (10.1016/j.matdes.2015.04.016_b0035) 1989; 41 Kikuchi (10.1016/j.matdes.2015.04.016_b0100) 1991; 146 Wang (10.1016/j.matdes.2015.04.016_b0015) 2014; 64 Bai (10.1016/j.matdes.2015.04.016_b0095) 2014; 30 Hamada (10.1016/j.matdes.2015.04.016_b0040) 2013; 559 Ha (10.1016/j.matdes.2015.04.016_b0045) 2009; 61 Trillo (10.1016/j.matdes.2015.04.016_b0110) 1998; 33 Singhal (10.1016/j.matdes.2015.04.016_b0080) 1968; 16 Lee (10.1016/j.matdes.2015.04.016_b0085) 2011; 42 Roncery (10.1016/j.matdes.2015.04.016_b0090) 2011; 59 |
References_xml | – volume: 13 start-page: 1159 year: 1965 end-page: 1168 ident: b0065 article-title: Precipitation of M publication-title: Acta Metall. – volume: 17 start-page: 241 year: 1983 end-page: 247 ident: b0125 article-title: Aging behaviour of 18Mn–18Cr high nitrogen austenitic steel for end rings publication-title: Met. Sci. – volume: 101 start-page: 93 year: 1988 end-page: 98 ident: b0020 article-title: Solid solution and grain size hardening of nitrogen-alloyed austenitic steels publication-title: Mater. Sci. Eng., A – volume: 17 start-page: 729 year: 2010 end-page: 736 ident: b0165 article-title: Microstructural evolution and mechanical properties of aging high nitrogen austenitic stainless steels publication-title: Int. J. Miner. Metall. Mater. – volume: 16 start-page: 1159 year: 1968 end-page: 1165 ident: b0080 article-title: The nucleation and growth of Widmanstätten M publication-title: Acta Metall. – volume: 26 start-page: 2085 year: 1995 end-page: 2101 ident: b0145 article-title: Mechanical properties of isothermally aged high-nitrogen stainless steel publication-title: Metall. Mater. Trans. A – volume: 46 start-page: 1437 year: 2015 end-page: 1442 ident: b0030 article-title: Hot ductility behaviors in the weld heat-affected zone of nitrogen-alloyed Fe–18Cr–10Mn austenitic stainless steels publication-title: Metall. Mater. Trans. A – volume: 33 start-page: 1263 year: 1998 end-page: 1271 ident: b0110 article-title: A TEM investigation of M publication-title: J. Mater. Sci. – volume: 63 start-page: 500 year: 2014 end-page: 507 ident: b0010 article-title: Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy publication-title: Mater. Des. – volume: 45 start-page: 4268 year: 2014 end-page: 4279 ident: b0025 article-title: Numerical simulations of carbon and nitrogen composition-depth profiles in nitrocarburized austenitic stainless steels publication-title: Metall. Mater. Trans. A – volume: 7 start-page: 392 year: 1959 end-page: 398 ident: b0140 article-title: Appearance of dislocations in metal crystals on evaporation: twinning dislocations and their relation to annealing twins in copper publication-title: Acta Metall. – volume: 88 start-page: 229 year: 2008 end-page: 242 ident: b0120 article-title: On Cr publication-title: Philos. Mag. – volume: 61 start-page: 121 year: 2009 end-page: 124 ident: b0045 article-title: Effects of combined addition of carbon and nitrogen on pitting corrosion behavior of Fe–18Cr–10Mn alloys publication-title: Scr. Mater. – volume: 59 start-page: 6275 year: 2011 end-page: 6286 ident: b0090 article-title: Nucleation and precipitation kinetics of M publication-title: Acta Mater. – volume: 30 start-page: 6035 year: 1995 end-page: 6046 ident: b0130 article-title: Discontinuous precipitation of Cr publication-title: J. Mater. Sci. – volume: 559 start-page: 336 year: 2013 end-page: 344 ident: b0040 article-title: Contribution of deformation mechanisms to strength and ductility in two Cr–Mn grade austenitic stainless steels publication-title: Mater. Sci. Eng., A – volume: 32 start-page: 3711 year: 2011 end-page: 3717 ident: b0055 article-title: Effects of hot-working parameters on microstructural evolution of high nitrogen austenitic stainless steel publication-title: Mater. Des. – volume: 65 start-page: 509 year: 2011 end-page: 512 ident: b0115 article-title: Formation of M23C publication-title: Scr. Mater. – volume: 41 start-page: 16 year: 1989 end-page: 21 ident: b0035 article-title: Nitrogen in austenitic stainless steels publication-title: JOM – volume: 3 start-page: 2797 year: 1972 end-page: 2804 ident: b0160 article-title: Fracture of steels containing pearlite publication-title: Metall. Trans. – volume: 37 start-page: 349 year: 2012 end-page: 355 ident: b0060 article-title: Influence of grain boundary carbides on mechanical properties of high nitrogen austenitic stainless steel publication-title: Mater. Des. – volume: 22 start-page: 4221 year: 1987 end-page: 4232 ident: b0135 article-title: The discontinuous precipitation of M publication-title: J. Mater. Sci. – volume: 15 start-page: 1603 year: 1967 end-page: 1610 ident: b0070 article-title: The growth of M publication-title: Acta Metall. – volume: 41 start-page: 641 year: 2001 end-page: 653 ident: b0150 article-title: Strengthening mechanisms of creep resistant tempered martensitic steel publication-title: ISIJ Int. – volume: 42 start-page: 3543 year: 2011 end-page: 3548 ident: b0085 article-title: Precipitation of second phases in high-interstitial-alloyed austenitic steel publication-title: Metall. Mater. Trans. A – volume: 30 start-page: 205 year: 2014 end-page: 210 ident: b0095 article-title: Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel publication-title: Mater. Sci. Technol. – volume: 15 start-page: 113 year: 1967 end-page: 129 ident: b0075 article-title: The shape and mechanism of formation of M publication-title: Acta Metall. – volume: 47 start-page: 196 year: 2015 end-page: 203 ident: b0005 article-title: Effect of nitrogen and cold working on structural and mechanical behavior of Ni-free nitrogen containing austenitic stainless steels for biomedical applications publication-title: Mater. Sci. Eng., C – volume: 146 start-page: 131 year: 1991 end-page: 150 ident: b0100 article-title: Cellular precipitation involving both substitutional and interstitial solutes: cellular precipitation of Cr publication-title: Mater. Sci. Eng., A – volume: 3 start-page: 851 year: 1972 end-page: 866 ident: b0105 article-title: Phase instabilities during high temperature exposure of 316 austenitic stainless steel publication-title: Metall. Trans. – volume: 539 start-page: 170 year: 2012 end-page: 176 ident: b0155 article-title: Strengthening mechanisms of precipitates in S30432 heat-resistant steel during short-term aging publication-title: Mater. Sci. Eng., A – volume: 21 start-page: 513 year: 1987 end-page: 518 ident: b0050 article-title: Influence of annealing temperature on the microstructure and mechanical properties of a high nitrogen containing austenitic stainless steel publication-title: Scr. Metall. – volume: 64 start-page: 355 year: 2014 end-page: 359 ident: b0015 article-title: Microstructural evolution and mechanical properties of friction stir welded joint of Fe–Cr–Mn–Mo–N austenite stainless steel publication-title: Mater. Des. – volume: 101 start-page: 93 year: 1988 ident: 10.1016/j.matdes.2015.04.016_b0020 article-title: Solid solution and grain size hardening of nitrogen-alloyed austenitic steels publication-title: Mater. Sci. Eng., A – volume: 30 start-page: 205 year: 2014 ident: 10.1016/j.matdes.2015.04.016_b0095 article-title: Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel publication-title: Mater. Sci. Technol. doi: 10.1179/1743284713Y.0000000347 – volume: 88 start-page: 229 year: 2008 ident: 10.1016/j.matdes.2015.04.016_b0120 article-title: On Cr2N precipitation mechanisms in high-nitrogen austenite publication-title: Philos. Mag. doi: 10.1080/14786430701805590 – volume: 45 start-page: 4268 year: 2014 ident: 10.1016/j.matdes.2015.04.016_b0025 article-title: Numerical simulations of carbon and nitrogen composition-depth profiles in nitrocarburized austenitic stainless steels publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-014-2377-z – volume: 37 start-page: 349 year: 2012 ident: 10.1016/j.matdes.2015.04.016_b0060 article-title: Influence of grain boundary carbides on mechanical properties of high nitrogen austenitic stainless steel publication-title: Mater. Des. doi: 10.1016/j.matdes.2012.01.024 – volume: 65 start-page: 509 year: 2011 ident: 10.1016/j.matdes.2015.04.016_b0115 article-title: Formation of M23C6-type precipitates and chromium-depleted zones in austenite stainless steel publication-title: Scr. Mater. doi: 10.1016/j.scriptamat.2011.06.010 – volume: 13 start-page: 1159 year: 1965 ident: 10.1016/j.matdes.2015.04.016_b0065 article-title: Precipitation of M23C6 in austenitic steels publication-title: Acta Metall. doi: 10.1016/0001-6160(65)90053-2 – volume: 30 start-page: 6035 year: 1995 ident: 10.1016/j.matdes.2015.04.016_b0130 article-title: Discontinuous precipitation of Cr2N in a high nitrogen, chromium–manganese austenitic stainless steel publication-title: J. Mater. Sci. doi: 10.1007/BF01151525 – volume: 146 start-page: 131 year: 1991 ident: 10.1016/j.matdes.2015.04.016_b0100 article-title: Cellular precipitation involving both substitutional and interstitial solutes: cellular precipitation of Cr2N in Cr–Ni austenitic steels publication-title: Mater. Sci. Eng., A doi: 10.1016/0921-5093(91)90273-P – volume: 46 start-page: 1437 year: 2015 ident: 10.1016/j.matdes.2015.04.016_b0030 article-title: Hot ductility behaviors in the weld heat-affected zone of nitrogen-alloyed Fe–18Cr–10Mn austenitic stainless steels publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-015-2771-1 – volume: 63 start-page: 500 year: 2014 ident: 10.1016/j.matdes.2015.04.016_b0010 article-title: Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.06.069 – volume: 21 start-page: 513 year: 1987 ident: 10.1016/j.matdes.2015.04.016_b0050 article-title: Influence of annealing temperature on the microstructure and mechanical properties of a high nitrogen containing austenitic stainless steel publication-title: Scr. Metall. doi: 10.1016/0036-9748(87)90191-8 – volume: 64 start-page: 355 year: 2014 ident: 10.1016/j.matdes.2015.04.016_b0015 article-title: Microstructural evolution and mechanical properties of friction stir welded joint of Fe–Cr–Mn–Mo–N austenite stainless steel publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.07.063 – volume: 15 start-page: 113 year: 1967 ident: 10.1016/j.matdes.2015.04.016_b0075 article-title: The shape and mechanism of formation of M23C6 carbide in austenite publication-title: Acta Metall. doi: 10.1016/0001-6160(67)90159-9 – volume: 15 start-page: 1603 year: 1967 ident: 10.1016/j.matdes.2015.04.016_b0070 article-title: The growth of M23C6 carbide on incoherent twin boundaries in austenite publication-title: Acta Metall. doi: 10.1016/0001-6160(67)90134-4 – volume: 17 start-page: 241 year: 1983 ident: 10.1016/j.matdes.2015.04.016_b0125 article-title: Aging behaviour of 18Mn–18Cr high nitrogen austenitic steel for end rings publication-title: Met. Sci. doi: 10.1179/030634583790420871 – volume: 41 start-page: 16 year: 1989 ident: 10.1016/j.matdes.2015.04.016_b0035 article-title: Nitrogen in austenitic stainless steels publication-title: JOM doi: 10.1007/BF03220991 – volume: 3 start-page: 2797 year: 1972 ident: 10.1016/j.matdes.2015.04.016_b0160 article-title: Fracture of steels containing pearlite publication-title: Metall. Trans. doi: 10.1007/BF02652845 – volume: 3 start-page: 851 year: 1972 ident: 10.1016/j.matdes.2015.04.016_b0105 article-title: Phase instabilities during high temperature exposure of 316 austenitic stainless steel publication-title: Metall. Trans. doi: 10.1007/BF02647659 – volume: 7 start-page: 392 year: 1959 ident: 10.1016/j.matdes.2015.04.016_b0140 article-title: Appearance of dislocations in metal crystals on evaporation: twinning dislocations and their relation to annealing twins in copper publication-title: Acta Metall. doi: 10.1016/0001-6160(59)90047-1 – volume: 33 start-page: 1263 year: 1998 ident: 10.1016/j.matdes.2015.04.016_b0110 article-title: A TEM investigation of M23C6 carbide precipitation behaviour on varying grain boundary misorientations in 304 stainless steels publication-title: J. Mater. Sci. doi: 10.1023/A:1004390029071 – volume: 59 start-page: 6275 year: 2011 ident: 10.1016/j.matdes.2015.04.016_b0090 article-title: Nucleation and precipitation kinetics of M23C6 and M2N in an Fe–Mn–Cr–C–N austenitic matrix and their relationship with the sensitization phenomenon publication-title: Acta Mater. doi: 10.1016/j.actamat.2011.06.038 – volume: 22 start-page: 4221 year: 1987 ident: 10.1016/j.matdes.2015.04.016_b0135 article-title: The discontinuous precipitation of M23C6 in Nimonic 80A publication-title: J. Mater. Sci. doi: 10.1007/BF01132012 – volume: 32 start-page: 3711 year: 2011 ident: 10.1016/j.matdes.2015.04.016_b0055 article-title: Effects of hot-working parameters on microstructural evolution of high nitrogen austenitic stainless steel publication-title: Mater. Des. doi: 10.1016/j.matdes.2011.03.055 – volume: 61 start-page: 121 year: 2009 ident: 10.1016/j.matdes.2015.04.016_b0045 article-title: Effects of combined addition of carbon and nitrogen on pitting corrosion behavior of Fe–18Cr–10Mn alloys publication-title: Scr. Mater. doi: 10.1016/j.scriptamat.2009.03.018 – volume: 539 start-page: 170 year: 2012 ident: 10.1016/j.matdes.2015.04.016_b0155 article-title: Strengthening mechanisms of precipitates in S30432 heat-resistant steel during short-term aging publication-title: Mater. Sci. Eng., A doi: 10.1016/j.msea.2012.01.076 – volume: 16 start-page: 1159 year: 1968 ident: 10.1016/j.matdes.2015.04.016_b0080 article-title: The nucleation and growth of Widmanstätten M23C6 precipitation in an austenitic stainless steel publication-title: Acta Metall. doi: 10.1016/0001-6160(68)90050-3 – volume: 17 start-page: 729 year: 2010 ident: 10.1016/j.matdes.2015.04.016_b0165 article-title: Microstructural evolution and mechanical properties of aging high nitrogen austenitic stainless steels publication-title: Int. J. Miner. Metall. Mater. doi: 10.1007/s12613-010-0381-x – volume: 42 start-page: 3543 year: 2011 ident: 10.1016/j.matdes.2015.04.016_b0085 article-title: Precipitation of second phases in high-interstitial-alloyed austenitic steel publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-011-0924-4 – volume: 559 start-page: 336 year: 2013 ident: 10.1016/j.matdes.2015.04.016_b0040 article-title: Contribution of deformation mechanisms to strength and ductility in two Cr–Mn grade austenitic stainless steels publication-title: Mater. Sci. Eng., A doi: 10.1016/j.msea.2012.08.108 – volume: 41 start-page: 641 year: 2001 ident: 10.1016/j.matdes.2015.04.016_b0150 article-title: Strengthening mechanisms of creep resistant tempered martensitic steel publication-title: ISIJ Int. doi: 10.2355/isijinternational.41.641 – volume: 47 start-page: 196 year: 2015 ident: 10.1016/j.matdes.2015.04.016_b0005 article-title: Effect of nitrogen and cold working on structural and mechanical behavior of Ni-free nitrogen containing austenitic stainless steels for biomedical applications publication-title: Mater. Sci. Eng., C doi: 10.1016/j.msec.2014.10.078 – volume: 26 start-page: 2085 year: 1995 ident: 10.1016/j.matdes.2015.04.016_b0145 article-title: Mechanical properties of isothermally aged high-nitrogen stainless steel publication-title: Metall. Mater. Trans. A doi: 10.1007/BF02670680 |
SSID | ssj0017112 |
Score | 2.4429808 |
Snippet | [Display omitted]
•Intergranular M23C6 grew along grain boundaries to form film-shaped morphology.•Cellular precipitation of M23C6 is controlled by the... The precipitation behavior of M23C6 carbides and its influence on the tensile properties were investigated in a novel 0.3C-20Cr-11Mn-1Mo-0.35N austenitic... |
SourceID | proquest crossref elsevier |
SourceType | Aggregation Database Enrichment Source Index Database Publisher |
StartPage | 42 |
SubjectTerms | Aging treatment Austenitic stainless steels Carbides Cellular Cr–Mn–N austenitic steel Dislocations Grain boundaries M23C6 carbide Precipitation Tensile properties Twin boundaries |
Title | Precipitation of M23C6 and its effect on tensile properties of 0.3C–20Cr–11Mn–1Mo–0.35N steel |
URI | https://dx.doi.org/10.1016/j.matdes.2015.04.016 https://www.proquest.com/docview/1770272281 |
Volume | 78 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV3NatwwEBYhuTSH0KYJ-WmDCrmaXUmWbB-Dadgm7FJIA7kJSR7BhsW7bDb3vEPfsE-SGVsObQkEcrGwfow9Go--kUafGDtvgnRo-GPmtEMHJQiRlTHqLBI6rXQEEWm_83RmJrf51Z2-22L1sBeGwiqT7e9temetU84oSXO0ms9HN-Q9IOCtENIQTkE7vCNVZVC1dy5-XE9mL4sJhegWPdNUi6mGHXRdmBfiwgaIt1vojvOUDj5_fYT6z1Z3A9DlR7aXkCO_6F_uE9uCdp_t_sUn-JnBT-KqWCXabb6MfCpVbbhrGz7fPPA-eINjURe3vgC-orn4NZGqUm30res_T7_luF5jIsS0pWS6xCsW6RlHlYDFAbu9_P6rnmTpHIUsIBzbZFFLMABChgYglNJXOahQOFUQFYwRfuwbo2PjREnseqqCWMooAx2eGb0u1CHbbpctHDHuQq7GoL0pdcwdiDJ4X2onlc69F0YeMzXIzob0tXTWxcIO0WT3tpe4JYnbcW4x85hlL61WPcnGG_WLoVvsP8picRx4o-W3oRct_ke0OOJaWD4-WFEU6KFLWYqTdz_9lH2guy4-UH9h25v1I3xFzLLxZ0knnwEm--wT |
linkProvider | Elsevier |
linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1La9wwEBbL7iHtoSR90DSPqtCr2ZVs-XEMJmHz8BJoArkJSR7BlsW7bDb3_If8w_ySzNhyaEogkIsFehh5JI--kUbfMPa7dtKg4veRUQYNFCdElHuvIk_otFAehKf7ztUsnV4nZzfqZsDK_i4MuVUG3d_p9FZbh5xxkOZ4NZ-P_5D1gIC3QEhDOAX18IjYqdSQjY5Oz6ez58OETLSHnmGrJS36G3StmxfiwhqIt1uolvOUAp-_vkL9p6vbBehkm30KyJEfdZ3bYQNoPrOP__AJfmFwSVwVq0C7zZeeVzIuU26ams83t7xz3uBY1PqtL4CvaC9-TaSqVBtt6_Lx_kFOyjUmQlQNJdUSn1ikZhynBCy-suuT46tyGoU4CpFDOLaJvJKQAgjpagCXS1skELvMxBlRwaTCTmydKl8bkRO7XlyAz6WXjoJnequy-BsbNssGvjNuXBJPQNk0Vz4xIHJnba6MjFVirUjlLot72WkXvpZiXSx07032V3cS1yRxPUk0Zu6y6LnVqiPZeKN-1g-LfjFZNK4Db7T81Y-ixv-IDkdMA8u7Wy2yDC10KXPx491v_8m2plfVhb44nZ3vsQ9U0voKqn023Kzv4ADxy8Yehvn5BE2D7vk |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Precipitation+of+M23C6+and+its+effect+on+tensile+properties+of+0.3C%E2%80%9320Cr%E2%80%9311Mn%E2%80%931Mo%E2%80%930.35N+steel&rft.jtitle=Materials+in+engineering&rft.au=Zheng%2C+Leigang&rft.au=Hu%2C+Xiaoqiang&rft.au=Kang%2C+Xiuhong&rft.au=Li%2C+Dianzhong&rft.date=2015-08-05&rft.pub=Elsevier+Ltd&rft.issn=0261-3069&rft.volume=78&rft.spage=42&rft.epage=50&rft_id=info:doi/10.1016%2Fj.matdes.2015.04.016&rft.externalDocID=S0261306915001922 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0261-3069&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0261-3069&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0261-3069&client=summon |