Microstructural evolution of a nickel-based superalloy during hot deformation
[Display omitted] •Deformation parameters have significant influences on the grain microstructure.•The dislocation substructure is also very sensitive to the deformation parameters.•The bulging of initial grain boundaries is the main nucleation mechanism of DRX.•The complete DRX domains are determin...
Saved in:
| Published in | Materials in engineering Vol. 77; pp. 41 - 49 |
|---|---|
| Main Authors | , , , , , , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier Ltd
15.07.2015
|
| Subjects | |
| Online Access | Get full text |
Cover
Loading…
| Abstract | [Display omitted]
•Deformation parameters have significant influences on the grain microstructure.•The dislocation substructure is also very sensitive to the deformation parameters.•The bulging of initial grain boundaries is the main nucleation mechanism of DRX.•The complete DRX domains are determined by DRX volume fractions contour map.
Hot compressive tests of a nickel-based superalloy are performed under the strain rate range of 0.001–1s−1 and deformation temperature range of 920–1040°C. Optical microscopy (OM) and transmission electron microscopy (TEM) are employed to investigate the evolution of dynamic recrystallized (DRX) grain and dislocation substructure. It is found that the effects of deformation degree, strain rate and deformation temperature on DRX grain are significant. When the deformation degree or temperature is increased, the number of DRX grains rapidly increases. But, the increase of strain rate reduces the number of DRX grains. The dislocation substructure is also very sensitive to the deformation degree, strain rate and deformation temperature. With the increase of deformation degree, the evolution of dislocation substructure can be characterized as: high dislocation density→dislocation network→subgrain→DRX grain. Under high deformation temperatures or low strain rates, the dislocation substructure can be easily annihilated and rearranged because of the occurrence of DRX. Based on the evaluated DRX volume fractions, the contour map is constructed to optimize the hot deformation parameters. |
|---|---|
| AbstractList | Hot compressive tests of a nickel-based superalloy are performed under the strain rate range of 0.001-1s- 1 and deformation temperature range of 920-1040 degree C. Optical microscopy (OM) and transmission electron microscopy (TEM) are employed to investigate the evolution of dynamic recrystallized (DRX) grain and dislocation substructure. It is found that the effects of deformation degree, strain rate and deformation temperature on DRX grain are significant. When the deformation degree or temperature is increased, the number of DRX grains rapidly increases. But, the increase of strain rate reduces the number of DRX grains. The dislocation substructure is also very sensitive to the deformation degree, strain rate and deformation temperature. With the increase of deformation degree, the evolution of dislocation substructure can be characterized as: high dislocation density arrow right dislocation network arrow right subgrain arrow right DRX grain. Under high deformation temperatures or low strain rates, the dislocation substructure can be easily annihilated and rearranged because of the occurrence of DRX. Based on the evaluated DRX volume fractions, the contour map is constructed to optimize the hot deformation parameters. [Display omitted] •Deformation parameters have significant influences on the grain microstructure.•The dislocation substructure is also very sensitive to the deformation parameters.•The bulging of initial grain boundaries is the main nucleation mechanism of DRX.•The complete DRX domains are determined by DRX volume fractions contour map. Hot compressive tests of a nickel-based superalloy are performed under the strain rate range of 0.001–1s−1 and deformation temperature range of 920–1040°C. Optical microscopy (OM) and transmission electron microscopy (TEM) are employed to investigate the evolution of dynamic recrystallized (DRX) grain and dislocation substructure. It is found that the effects of deformation degree, strain rate and deformation temperature on DRX grain are significant. When the deformation degree or temperature is increased, the number of DRX grains rapidly increases. But, the increase of strain rate reduces the number of DRX grains. The dislocation substructure is also very sensitive to the deformation degree, strain rate and deformation temperature. With the increase of deformation degree, the evolution of dislocation substructure can be characterized as: high dislocation density→dislocation network→subgrain→DRX grain. Under high deformation temperatures or low strain rates, the dislocation substructure can be easily annihilated and rearranged because of the occurrence of DRX. Based on the evaluated DRX volume fractions, the contour map is constructed to optimize the hot deformation parameters. |
| Author | Wen, Dong-Xu He, Min Chen, Ming-Song Chen, Xiao-Min Zhang, Jin-Long Li, Hong-Bin Lin, Y.C. |
| Author_xml | – sequence: 1 givenname: Xiao-Min surname: Chen fullname: Chen, Xiao-Min organization: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China – sequence: 2 givenname: Y.C. surname: Lin fullname: Lin, Y.C. email: yclin@csu.edu.cn, linyongcheng@163.com organization: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China – sequence: 3 givenname: Ming-Song surname: Chen fullname: Chen, Ming-Song organization: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China – sequence: 4 givenname: Hong-Bin surname: Li fullname: Li, Hong-Bin organization: College of Metallurgy and Energy, Hebei United University, Tangshan 063009, China – sequence: 5 givenname: Dong-Xu surname: Wen fullname: Wen, Dong-Xu organization: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China – sequence: 6 givenname: Jin-Long surname: Zhang fullname: Zhang, Jin-Long organization: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China – sequence: 7 givenname: Min surname: He fullname: He, Min organization: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China |
| BookMark | eNqFkD1PwzAURT0UibbwDxg8siTYseMkDEio4ktqxQKz5dgv4OLGxXYq9d-TUiYGmN5yz326Z4Ymve8BoQtKckqouFrnG5UMxLwgtMwJzwnhEzQlhaAZI6I5RbMY14TQitJiilYrq4OPKQw6DUE5DDvvhmR9j32HFe6t_gCXtSqCwXHYwphxfo_NEGz_ht99wgY6H8anI3OGTjrlIpz_3Dl6vb97WTxmy-eHp8XtMtOclCmjrNVaQNMCq1vGOZhWqIoqyutSdVpobmqgrBGlMaahnEDVUFUr3gnOSmHYHF0ee7fBfw4Qk9zYqME51YMfoqRVRVjBGC_HKD9GDzNjgE5ug92osJeUyIMxuZZHY_JgTBIuR2Mjdv0L0zZ9b0xBWfcffHOEYXSwsxBk1BZ6DcYG0Ekab_8u-AIHxI9d |
| CitedBy_id | crossref_primary_10_1557_jmr_2016_204 crossref_primary_10_3390_ma14010111 crossref_primary_10_1016_j_msea_2021_141293 crossref_primary_10_1016_j_jallcom_2017_11_299 crossref_primary_10_1016_j_matchar_2018_04_056 crossref_primary_10_1007_s11771_016_3370_z crossref_primary_10_1016_j_matdes_2019_108429 crossref_primary_10_1016_j_jmrt_2023_04_143 crossref_primary_10_1007_s40192_017_0101_8 crossref_primary_10_1016_j_matdes_2019_107584 crossref_primary_10_1520_JTE20160507 crossref_primary_10_1016_j_vacuum_2017_04_030 crossref_primary_10_1016_j_matdes_2017_02_088 crossref_primary_10_1016_j_matdes_2017_06_004 crossref_primary_10_1007_s11431_019_9548_x crossref_primary_10_1016_j_jallcom_2017_10_246 crossref_primary_10_1016_j_jmst_2024_11_079 crossref_primary_10_1088_2053_1591_ab9b14 crossref_primary_10_1080_2374068X_2015_1112153 crossref_primary_10_3390_app11177951 crossref_primary_10_1007_s12289_020_01557_w crossref_primary_10_1088_2053_1591_aaf2bb crossref_primary_10_1088_2053_1591_ab6768 crossref_primary_10_1016_j_engfailanal_2019_104187 crossref_primary_10_1016_j_msea_2016_03_119 crossref_primary_10_1016_j_rinp_2017_04_027 crossref_primary_10_3390_ma14040716 crossref_primary_10_3390_ma15207064 crossref_primary_10_1016_j_ast_2017_08_011 crossref_primary_10_1016_j_msea_2020_139638 crossref_primary_10_1007_s11665_015_1634_7 crossref_primary_10_1016_j_msea_2024_147450 crossref_primary_10_1007_s11665_017_3030_y crossref_primary_10_1016_j_msea_2016_09_088 crossref_primary_10_1016_j_jallcom_2021_159889 crossref_primary_10_1016_j_msea_2015_10_004 crossref_primary_10_1016_j_jallcom_2017_12_265 crossref_primary_10_3390_met12050710 crossref_primary_10_1016_j_vacuum_2016_12_022 crossref_primary_10_1016_j_jmrt_2022_03_033 crossref_primary_10_1007_s12540_019_00242_1 crossref_primary_10_1016_j_matchar_2016_03_024 crossref_primary_10_4236_msa_2020_114015 crossref_primary_10_1016_j_msea_2017_02_002 crossref_primary_10_1007_s00339_016_0129_1 crossref_primary_10_1016_j_jallcom_2017_05_042 crossref_primary_10_1016_j_matchar_2019_110010 crossref_primary_10_1016_j_vacuum_2018_06_059 crossref_primary_10_1016_j_jmmm_2021_168260 crossref_primary_10_1007_s11665_019_04383_7 crossref_primary_10_1177_09544089211042484 crossref_primary_10_1007_s11661_021_06478_0 crossref_primary_10_3390_ma12030510 crossref_primary_10_1016_j_matchar_2023_112961 crossref_primary_10_1186_s10033_023_00919_0 crossref_primary_10_1016_j_intermet_2024_108545 crossref_primary_10_1007_s11661_022_06815_x crossref_primary_10_1016_j_matdes_2015_11_064 crossref_primary_10_1016_j_jallcom_2024_178234 crossref_primary_10_1007_s00339_016_0404_1 crossref_primary_10_1007_s11665_022_07320_3 crossref_primary_10_1016_j_cja_2018_07_013 crossref_primary_10_1016_j_matdes_2015_06_140 crossref_primary_10_1007_s11665_018_3761_4 crossref_primary_10_3390_ma17071697 crossref_primary_10_1007_s11661_016_3929_1 crossref_primary_10_1007_s11661_019_05380_0 crossref_primary_10_1007_s12598_020_01643_7 crossref_primary_10_1016_j_jallcom_2018_03_372 crossref_primary_10_1016_j_msea_2019_138412 crossref_primary_10_1002_adem_201900426 crossref_primary_10_1016_j_ijfatigue_2018_09_019 crossref_primary_10_1016_j_msea_2016_09_100 crossref_primary_10_1016_j_pnsc_2024_12_001 crossref_primary_10_1557_jmr_2015_368 crossref_primary_10_1007_s11661_016_3664_7 crossref_primary_10_1016_j_matdes_2016_02_052 crossref_primary_10_1007_s11665_019_04459_4 crossref_primary_10_1002_adem_201801022 crossref_primary_10_1007_s11665_017_2701_z crossref_primary_10_1007_s11663_018_1268_x crossref_primary_10_1016_j_vacuum_2018_12_043 crossref_primary_10_1007_s00170_023_11165_y crossref_primary_10_1016_j_ijimpeng_2023_104764 crossref_primary_10_3390_met8060391 crossref_primary_10_1007_s11595_020_2341_2 crossref_primary_10_1051_mfreview_2023008 crossref_primary_10_1016_j_vacuum_2017_11_021 crossref_primary_10_3390_ma11101978 crossref_primary_10_1016_j_jallcom_2019_05_022 crossref_primary_10_1002_adem_201900558 crossref_primary_10_1088_2053_1591_ab53f9 crossref_primary_10_1016_j_msea_2016_09_056 crossref_primary_10_1016_j_jallcom_2024_176352 crossref_primary_10_3390_ma17133159 crossref_primary_10_1115_1_4037660 crossref_primary_10_1007_s11663_019_01606_z crossref_primary_10_1016_j_jallcom_2016_07_204 crossref_primary_10_1016_j_matchar_2018_08_018 crossref_primary_10_1080_00084433_2018_1444414 crossref_primary_10_1007_s00521_016_2635_7 crossref_primary_10_1016_j_mssp_2018_07_019 crossref_primary_10_1016_j_vacuum_2024_113113 crossref_primary_10_3390_aerospace9020092 crossref_primary_10_1016_j_vacuum_2019_108934 crossref_primary_10_3390_met10060817 crossref_primary_10_2139_ssrn_4051534 crossref_primary_10_3390_met10091171 crossref_primary_10_1016_j_jallcom_2019_02_055 crossref_primary_10_1016_j_jmrt_2020_01_020 crossref_primary_10_1016_j_jmst_2017_11_031 crossref_primary_10_1016_j_jmrt_2024_08_055 crossref_primary_10_1016_j_matdes_2016_09_007 crossref_primary_10_1016_j_matdes_2015_05_029 crossref_primary_10_1016_j_matdes_2015_08_035 crossref_primary_10_1007_s11661_018_4707_z crossref_primary_10_1016_j_matdes_2015_08_036 crossref_primary_10_1016_j_engfracmech_2018_03_019 crossref_primary_10_1016_j_jallcom_2016_08_096 crossref_primary_10_1016_j_jallcom_2016_09_228 crossref_primary_10_1016_j_msea_2016_08_061 crossref_primary_10_1007_s12540_021_01130_3 crossref_primary_10_1515_amm_2016_0251 crossref_primary_10_1002_adem_202101348 crossref_primary_10_1016_j_jmrt_2023_09_180 crossref_primary_10_1016_j_msea_2018_10_032 crossref_primary_10_1007_s12613_023_2782_7 crossref_primary_10_1016_j_jallcom_2020_158541 crossref_primary_10_1088_1757_899X_1270_1_012004 crossref_primary_10_1088_2053_1591_ac00f2 crossref_primary_10_1080_02670836_2017_1407566 crossref_primary_10_1016_j_ijmecsci_2019_06_027 crossref_primary_10_1016_j_vacuum_2018_02_034 crossref_primary_10_1038_s41598_025_86619_2 crossref_primary_10_1007_s00170_023_12018_4 crossref_primary_10_1016_j_jallcom_2022_167061 crossref_primary_10_1016_j_jallcom_2023_171453 crossref_primary_10_1016_j_msea_2020_140326 crossref_primary_10_3390_nano9040658 crossref_primary_10_1016_j_jmrt_2025_03_040 crossref_primary_10_1016_j_msea_2017_05_109 crossref_primary_10_1016_j_matdes_2016_03_050 crossref_primary_10_1016_j_matchar_2024_114459 crossref_primary_10_1016_j_msea_2022_143471 crossref_primary_10_1016_S1006_706X_17_30134_6 crossref_primary_10_1016_j_proeng_2017_10_1108 |
| Cites_doi | 10.1007/s11665-014-0863-5 10.1016/j.msea.2011.03.025 10.1007/s12289-012-1096-5 10.1016/S1359-6454(97)00233-4 10.1016/j.msea.2012.06.014 10.1080/10426914.2012.681413 10.1007/s10853-006-1275-1 10.1016/j.msea.2010.05.021 10.1007/s11665-014-0947-2 10.1016/j.msea.2013.01.050 10.1016/j.msea.2012.10.044 10.1016/j.commatsci.2011.11.031 10.1007/s12540-013-1002-9 10.1007/s11665-014-1111-8 10.1007/s12613-014-0862-4 10.1016/j.msea.2013.09.049 10.1016/j.jallcom.2012.10.114 10.1016/j.msea.2006.02.415 10.1016/j.msea.2011.03.008 10.1016/j.jallcom.2014.10.034 10.1007/s11661-010-0517-7 10.1016/j.apm.2009.12.001 10.1016/j.msea.2014.01.029 10.1007/s11661-014-2480-1 10.1007/s11661-011-1015-2 10.1016/j.msea.2011.02.051 10.1016/j.matdes.2010.11.048 10.1016/j.matdes.2013.10.071 10.1016/j.jmatprotec.2004.03.029 10.1080/14786430801989799 10.1016/j.jsg.2008.03.004 10.1007/s11015-012-9577-9 10.1016/j.matdes.2013.10.042 10.1016/j.matchar.2011.06.004 10.1016/S0924-0136(03)00620-4 10.2355/isijinternational.53.680 10.1590/S1516-14392013005000091 10.1557/jmr.2014.349 10.1016/0001-6160(81)90112-7 10.1016/j.msea.2012.01.121 10.1016/j.jallcom.2011.07.014 10.2355/isijinternational.54.2926 10.1016/j.matdes.2014.02.052 10.1016/j.msea.2012.06.084 10.1016/j.matdes.2013.12.072 10.1016/j.ijplas.2013.08.011 10.1016/j.msea.2011.08.012 10.1002/srin.201200254 10.1016/S1359-6454(01)00233-6 10.1007/s11665-013-0815-5 10.1016/j.matdes.2013.02.011 10.1016/j.jallcom.2013.10.180 10.1016/j.jallcom.2014.11.155 10.1007/s11665-014-0891-1 10.1016/j.matchemphys.2013.03.022 10.1002/srin.201100024 10.1016/j.commatsci.2008.03.010 10.1016/j.intermet.2004.07.008 |
| ContentType | Journal Article |
| Copyright | 2015 Elsevier Ltd |
| Copyright_xml | – notice: 2015 Elsevier Ltd |
| DBID | AAYXX CITATION 7SR 8BQ 8FD JG9 |
| DOI | 10.1016/j.matdes.2015.04.004 |
| DatabaseName | CrossRef Engineered Materials Abstracts METADEX Technology Research Database Materials Research Database |
| DatabaseTitle | CrossRef Materials Research Database Engineered Materials Abstracts Technology Research Database METADEX |
| DatabaseTitleList | Materials Research Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EndPage | 49 |
| ExternalDocumentID | 10_1016_j_matdes_2015_04_004 S0261306915001727 |
| GroupedDBID | -~X 8P~ 9JN AABNK AACTN AAEDT AAEDW AAEPC AAKOC AALRI AAOAW AAXUO ABMAC ABXRA ABYKQ ACDAQ ACRLP ADTZH AEBSH AECPX AFKWA AFTJW AGHFR AGUBO AGYEJ AIEXJ AIKHN AITUG AJBFU ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BKOJK BLXMC EFJIC EO8 EO9 EP2 EP3 FDB FIRID FYGXN M24 M41 OAUVE Q38 SDF SPC SSM SST SSZ T5K 4G. 5VS 7-5 AAQXK AATTM AAXKI AAYWO AAYXX ABEFU ABFNM ABWVN ABXDB ACNNM ACRPL ACVFH ADCNI ADMUD ADNMO AEIPS AEUPX AFPUW AGCQF AGQPQ AGRNS AHHHB AIGII AIIUN AKBMS AKRWK AKYEP ANKPU AZFZN CITATION FGOYB G-2 IHE J1W R2- ROL SMS SSH 7SR 8BQ 8FD AFXIZ JG9 |
| ID | FETCH-LOGICAL-c405t-13bcc6e9be38b344edb6a71a1485afc6c4d8e13965ddd9140e791a8a4f64356d3 |
| IEDL.DBID | AIKHN |
| ISSN | 0261-3069 |
| IngestDate | Fri Jul 11 03:02:36 EDT 2025 Thu Apr 24 23:09:46 EDT 2025 Tue Jul 01 04:23:15 EDT 2025 Fri Feb 23 02:25:12 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Hot deformation Microstructural evolution Dynamic recrystallization Alloy |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c405t-13bcc6e9be38b344edb6a71a1485afc6c4d8e13965ddd9140e791a8a4f64356d3 |
| Notes | ObjectType-Article-1 SourceType-Scholarly Journals-1 ObjectType-Feature-2 content type line 23 |
| PQID | 1770323345 |
| PQPubID | 23500 |
| PageCount | 9 |
| ParticipantIDs | proquest_miscellaneous_1770323345 crossref_primary_10_1016_j_matdes_2015_04_004 crossref_citationtrail_10_1016_j_matdes_2015_04_004 elsevier_sciencedirect_doi_10_1016_j_matdes_2015_04_004 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | 2015-07-15 |
| PublicationDateYYYYMMDD | 2015-07-15 |
| PublicationDate_xml | – month: 07 year: 2015 text: 2015-07-15 day: 15 |
| PublicationDecade | 2010 |
| PublicationTitle | Materials in engineering |
| PublicationYear | 2015 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Sajadifar, Ketabchi, Bemanizadeh (b0135) 2012; 56 Mandal, Jayalakshmi, Bhaduri, Sarma (b0240) 2014; 45 Ning, Fu, Chen (b0160) 2012; 540 Mirzadeh, Najafizadeh (b0235) 2013; 53 Mandal, Bhaduri, Sarma (b0245) 2012; 43 Puchi-Cabrera, Staia, Guérin, Lesage, Dubar, Chicot (b0050) 2014; 54 Wang, Qian, Guo (b0100) 2013 Momeni, Dehghani, Ebrahimi (b0270) 2011; 509 Gangolu, Rao, Prabhu, Deshmukh, Kashyap (b0010) 2014; 23 Shen, Xue, Guo (b0040) 2010; 81 Lin, Hu, Jiang (b0225) 2005; 13 Opiela (b0025) 2014; 23 Lin, Chen, Zhong (b0075) 2008; 43 Lin, Deng, Jiang, Wen, Liu (b0155) 2014; 598 Mandal, Mishra, Kumar, Samajdar, Sivaprasad, Jayakumar, Raj (b0285) 2008; 88 Sajadifar, Ketabchi, Nourani (b0130) 2011; 82 Deng, Wang, Zheng, Wu (b0295) 2013; 560 Zhou, Lin, Deng, Jiang (b0215) 2014; 59 Mandal, Sivaprasad, Dube (b0265) 2007; 42 Samantaray, Mandal, Phaniraj, Bhaduri (b0115) 2011; 528 Ding, Guo (b0280) 2001; 49 Shimizu (b0250) 2008; 30 Yue, Zhang, Ruan, Gao (b0300) 2010; 34 Chen, Lin, Ma (b0080) 2012; 556 Etaati, Dehghani, Ebrahimi, Wang (b0170) 2013; 19 Ferdowsi, Nakhaie, Benhangi, Ebrahimi (b0140) 2014; 23 Park, Anh (b0020) 2013; 6 Rollett, Humphreys, Rohrer, Hatherly (b0275) 2004 Momeni, Kazemi, Ebrahimi, Maldar (b0125) 2014; 21 Quan, Wang, Liu, Zhou (b0085) 2013; 16 Chen, Lv, Tang, Liu, Wang (b0095) 2014; 54 Lin, Deng, Jiang, Wen, Liu (b0165) 2014; 55 Antonov, Detrois, Helmink, Tin (b0200) 2015; 626 Bedir (b0210) 2013; 49 Lin, Li, Xia, Jiang (b0055) 2013; 550 Ebrahimi, Najafizadeh (b0205) 2004; 152 Quan, Mao, Li, Lv, Wang, Zhou (b0070) 2012; 55 Torabinejad, Zarei-Hanzaki, Moemeni (b0105) 2012; 28 Wu, Liu, Hua, Wang, Zhang, Tao, Liu (b0185) 2011; 528 Chen, Cui, Liu, Chen, Chen (b0065) 2010; 527 Wen, Lin, Li, Chen, Deng, Li (b0145) 2014; 59 Mandal, Bhaduri, Sarma (b0290) 2011; 42 Yin, Hua, Mao, Han, Qian, Zhang (b0030) 2014; 55 Marandi, Zarei-Hanzaki, Haghdadi, Eskandari (b0045) 2012; 554 Sajadifar, Yapici (b0120) 2014; 23 Shore, Morakabati, Abbasi, Momeni (b0150) 2014; 23 Ning, Yao, Lei, Guo, Fu (b0180) 2011; 62 Zhang, Zhang, Li, Shen, Gu (b0190) 2014; 29 Chen, Lin, Wen, Zhang, He (b0035) 2014; 57 Chen, Cui, Chen (b0060) 2011; 528 Etaati, Dehghani (b0175) 2013; 140 Lin, Chen (b0005) 2011; 32 Ponge, Gottstein (b0220) 1997; 46 Mirzadeh, Parsa, Ohadi (b0110) 2013; 569 Li, Wei, Liu, Hou (b0090) 2013; 84 Wang, Liu, Cheng, Zuo, Chen (b0195) 2015; 623 Jorge, Regone, Balancin (b0255) 2003; 142 Momeni, Ebrahimi, Jahazi, Bocher (b0230) 2014; 587 Mecking, Kocks (b0260) 1981; 29 Yeom, Lee, Kim, Park (b0305) 2007; 565 Samantaray, Mandal, Bhaduri (b0015) 2011; 528 Wang (10.1016/j.matdes.2015.04.004_b0195) 2015; 623 Shen (10.1016/j.matdes.2015.04.004_b0040) 2010; 81 Momeni (10.1016/j.matdes.2015.04.004_b0230) 2014; 587 Gangolu (10.1016/j.matdes.2015.04.004_b0010) 2014; 23 Deng (10.1016/j.matdes.2015.04.004_b0295) 2013; 560 Yin (10.1016/j.matdes.2015.04.004_b0030) 2014; 55 Puchi-Cabrera (10.1016/j.matdes.2015.04.004_b0050) 2014; 54 Rollett (10.1016/j.matdes.2015.04.004_b0275) 2004 Zhang (10.1016/j.matdes.2015.04.004_b0190) 2014; 29 Mirzadeh (10.1016/j.matdes.2015.04.004_b0110) 2013; 569 Bedir (10.1016/j.matdes.2015.04.004_b0210) 2013; 49 Lin (10.1016/j.matdes.2015.04.004_b0225) 2005; 13 Mecking (10.1016/j.matdes.2015.04.004_b0260) 1981; 29 Momeni (10.1016/j.matdes.2015.04.004_b0125) 2014; 21 Ning (10.1016/j.matdes.2015.04.004_b0160) 2012; 540 Lin (10.1016/j.matdes.2015.04.004_b0005) 2011; 32 Chen (10.1016/j.matdes.2015.04.004_b0060) 2011; 528 Quan (10.1016/j.matdes.2015.04.004_b0070) 2012; 55 Ebrahimi (10.1016/j.matdes.2015.04.004_b0205) 2004; 152 Ponge (10.1016/j.matdes.2015.04.004_b0220) 1997; 46 Mandal (10.1016/j.matdes.2015.04.004_b0290) 2011; 42 Wang (10.1016/j.matdes.2015.04.004_b0100) 2013 Torabinejad (10.1016/j.matdes.2015.04.004_b0105) 2012; 28 Mandal (10.1016/j.matdes.2015.04.004_b0245) 2012; 43 Yeom (10.1016/j.matdes.2015.04.004_b0305) 2007; 565 Opiela (10.1016/j.matdes.2015.04.004_b0025) 2014; 23 Lin (10.1016/j.matdes.2015.04.004_b0155) 2014; 598 Sajadifar (10.1016/j.matdes.2015.04.004_b0135) 2012; 56 Marandi (10.1016/j.matdes.2015.04.004_b0045) 2012; 554 Sajadifar (10.1016/j.matdes.2015.04.004_b0120) 2014; 23 Mandal (10.1016/j.matdes.2015.04.004_b0240) 2014; 45 Lin (10.1016/j.matdes.2015.04.004_b0075) 2008; 43 Wu (10.1016/j.matdes.2015.04.004_b0185) 2011; 528 Momeni (10.1016/j.matdes.2015.04.004_b0270) 2011; 509 Chen (10.1016/j.matdes.2015.04.004_b0065) 2010; 527 Chen (10.1016/j.matdes.2015.04.004_b0095) 2014; 54 Wen (10.1016/j.matdes.2015.04.004_b0145) 2014; 59 Chen (10.1016/j.matdes.2015.04.004_b0035) 2014; 57 Lin (10.1016/j.matdes.2015.04.004_b0055) 2013; 550 Ferdowsi (10.1016/j.matdes.2015.04.004_b0140) 2014; 23 Li (10.1016/j.matdes.2015.04.004_b0090) 2013; 84 Shimizu (10.1016/j.matdes.2015.04.004_b0250) 2008; 30 Mandal (10.1016/j.matdes.2015.04.004_b0265) 2007; 42 Lin (10.1016/j.matdes.2015.04.004_b0165) 2014; 55 Park (10.1016/j.matdes.2015.04.004_b0020) 2013; 6 Zhou (10.1016/j.matdes.2015.04.004_b0215) 2014; 59 Samantaray (10.1016/j.matdes.2015.04.004_b0115) 2011; 528 Etaati (10.1016/j.matdes.2015.04.004_b0170) 2013; 19 Ding (10.1016/j.matdes.2015.04.004_b0280) 2001; 49 Antonov (10.1016/j.matdes.2015.04.004_b0200) 2015; 626 Shore (10.1016/j.matdes.2015.04.004_b0150) 2014; 23 Mirzadeh (10.1016/j.matdes.2015.04.004_b0235) 2013; 53 Chen (10.1016/j.matdes.2015.04.004_b0080) 2012; 556 Mandal (10.1016/j.matdes.2015.04.004_b0285) 2008; 88 Quan (10.1016/j.matdes.2015.04.004_b0085) 2013; 16 Jorge (10.1016/j.matdes.2015.04.004_b0255) 2003; 142 Yue (10.1016/j.matdes.2015.04.004_b0300) 2010; 34 Samantaray (10.1016/j.matdes.2015.04.004_b0015) 2011; 528 Sajadifar (10.1016/j.matdes.2015.04.004_b0130) 2011; 82 Etaati (10.1016/j.matdes.2015.04.004_b0175) 2013; 140 Ning (10.1016/j.matdes.2015.04.004_b0180) 2011; 62 |
| References_xml | – volume: 55 start-page: 65 year: 2012 end-page: 72 ident: b0070 article-title: A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress–strain curves publication-title: Comput. Mater. Sci. – volume: 528 start-page: 5204 year: 2011 end-page: 5211 ident: b0015 article-title: Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model publication-title: Mater. Sci. Eng. A – volume: 528 start-page: 8565 year: 2011 end-page: 8572 ident: b0115 article-title: Flow behavior and microstructural evolution during hot deformation of AISI Type 316L(N) austenitic stainless steel publication-title: Mater. Sci. Eng. A – volume: 59 start-page: 141 year: 2014 end-page: 150 ident: b0215 article-title: Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy publication-title: Mater. Des. – volume: 550 start-page: 438 year: 2013 end-page: 445 ident: b0055 article-title: Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy publication-title: J. Alloys Compd. – volume: 23 start-page: 1077 year: 2014 end-page: 1087 ident: b0140 article-title: Modeling the high temperature flow behavior and dynamic recrystallization kinetics of a medium carbon microalloyed steel publication-title: J. Mater. Eng. Perform. – volume: 556 start-page: 260 year: 2012 end-page: 266 ident: b0080 article-title: The kinetics of dynamic recrystallization of 42CrMo steel publication-title: Mater. Sci. Eng. A – volume: 62 start-page: 887 year: 2011 end-page: 889 ident: b0180 article-title: Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure publication-title: Mater. Charact. – volume: 152 start-page: 136 year: 2004 end-page: 143 ident: b0205 article-title: A new method for evaluation of friction in bulk metal forming publication-title: J. Mater. Process. Technol. – volume: 6 start-page: 423 year: 2013 end-page: 436 ident: b0020 article-title: Development of two-phase neural network-genetic algorithm hybrid model in modeling damage evolution in roll forming of aluminum sheet publication-title: Int. J. Mater. Form. – volume: 49 start-page: 953 year: 2013 end-page: 956 ident: b0210 article-title: Modeling approach and plastic deformation analysis of 6063 aluminum alloy during compression at elevated temperatures publication-title: Mater. Des. – volume: 23 start-page: 3379 year: 2014 end-page: 3388 ident: b0025 article-title: Effect of thermomechanical processing on the microstructure and mechanical properties of Nb–Ti–V microalloyed steel publication-title: J. Mater. Eng. Perform. – volume: 16 start-page: 1092 year: 2013 end-page: 1105 ident: b0085 article-title: Effect of temperatures and strain rates on the average size of grains refined by dynamic recrystallization for as-extruded 42CrMo Steel publication-title: Mater. Res. – volume: 45 start-page: 5645 year: 2014 end-page: 5656 ident: b0240 article-title: Effect of strain rate on dynamic recrystallization behavior in a nitrogen enhanced 316L(N) publication-title: Metall. Mater. Trans. A – volume: 598 start-page: 251 year: 2014 end-page: 262 ident: b0155 article-title: Effects of initial δ phase on the hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy publication-title: Mater. Sci. Eng. A – volume: 13 start-page: 343 year: 2005 end-page: 349 ident: b0225 article-title: Superplasticity of Ni-rich single phase NiAl intermetallics with large grains publication-title: Intermetallics – volume: 29 start-page: 2799 year: 2014 end-page: 2808 ident: b0190 article-title: Effects of microstructure and γ′ distribution on the hot deformation behavior for a powder metallurgy superalloy FGH96 publication-title: J. Mater. Res. – volume: 32 start-page: 1733 year: 2011 end-page: 1759 ident: b0005 article-title: A critical review of experimental results and constitutive descriptions for metals and alloys in hot working publication-title: Mater. Des. – volume: 42 start-page: 1062 year: 2011 end-page: 1072 ident: b0290 article-title: A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel publication-title: Metall. Mater. Trans. A – volume: 49 start-page: 3163 year: 2001 end-page: 3175 ident: b0280 article-title: Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization publication-title: Acta Mater. – volume: 43 start-page: 1117 year: 2008 end-page: 1122 ident: b0075 article-title: Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process publication-title: Comput. Mater. Sci. – volume: 55 start-page: 949 year: 2014 end-page: 957 ident: b0165 article-title: Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy publication-title: Mater. Des. – volume: 623 start-page: 69 year: 2015 end-page: 78 ident: b0195 article-title: Hot deformation characteristics and processing map analysis for nickel-based corrosion resistant alloy publication-title: J. Alloys Compd. – volume: 560 start-page: 824 year: 2013 end-page: 830 ident: b0295 article-title: Dynamic recrystallization behavior during hot deformation and mechanical properties of 0.2 publication-title: Mater. Sci. Eng. A – volume: 23 start-page: 1424 year: 2014 end-page: 1433 ident: b0150 article-title: Hot deformation behavior of Incoloy 901 through hot tensile testing publication-title: J. Mater. Eng. Perform. – volume: 140 start-page: 208 year: 2013 end-page: 215 ident: b0175 article-title: A study on hot deformation behavior of Ni–42.5Ti–7.5Cu alloy publication-title: Mater. Chem. Phys. – volume: 54 start-page: 113 year: 2014 end-page: 131 ident: b0050 article-title: An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization publication-title: Int. J. Plasticity – volume: 34 start-page: 2644 year: 2010 end-page: 2653 ident: b0300 article-title: Modelling of recrystallization behavior and austenite grain size evolution during the hot rolling of GCr15 rod publication-title: Appl. Math. Model. – volume: 565 start-page: 722 year: 2007 end-page: 726 ident: b0305 article-title: Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot publication-title: Mater. Sci. Eng. A – volume: 30 start-page: 899 year: 2008 end-page: 917 ident: b0250 article-title: Theories and applicability of grain size piezometers: the role of dynamic recrystallization mechanisms publication-title: J. Struct. Geol. – year: 2013 ident: b0100 article-title: Austenite grain growth behavior of AISI 4140 alloy steel publication-title: Adv. Mech. Eng. – volume: 56 start-page: 310 year: 2012 end-page: 320 ident: b0135 article-title: Dynamic recrystallization behavior and hot deformation characteristics in 4340 steel publication-title: Metallurgist – volume: 626 start-page: 76 year: 2015 end-page: 86 ident: b0200 article-title: Precipitate phase stability and compositional dependence on alloying additions in γ-γ’-δ-η Ni-base superalloys publication-title: J. Alloys Compd. – volume: 46 start-page: 69 year: 1997 end-page: 80 ident: b0220 article-title: Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior publication-title: Acta Mater. – volume: 540 start-page: 164 year: 2012 end-page: 173 ident: b0160 article-title: Hot deformation behavior of GH4169 superalloy associated with stick δ phase dissolution during isothermal compression process publication-title: Mater. Sci. Eng. A – volume: 54 start-page: 2926 year: 2014 end-page: 2932 ident: b0095 article-title: Low-carbon bainite steel with high strength and toughness processed by recrystallization controlled rolling and ultra fast cooling (RCR+UFC) publication-title: ISIJ Int. – volume: 587 start-page: 199 year: 2014 end-page: 210 ident: b0230 article-title: Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size publication-title: J. Alloys Compd. – year: 2004 ident: b0275 article-title: Recrystallization and Related Annealing Phenomena – volume: 42 start-page: 2724 year: 2007 end-page: 2734 ident: b0265 article-title: Kinetics, mechanism and modeling of microstructural evolution during thermo-mechanical processing of a 15Cr–15Ni–2.2Mo–Ti modified austenitic stainless steel publication-title: J. Mater. Sci. – volume: 82 start-page: 934 year: 2011 end-page: 939 ident: b0130 article-title: Modeling of mechanical characteristics in hot deformation of 4130 steel publication-title: Steel Res. Int. – volume: 509 start-page: 9387 year: 2011 end-page: 9393 ident: b0270 article-title: Modeling the initiation of dynamic recrystallization using a dynamic recovery model publication-title: J. Alloys Compd. – volume: 569 start-page: 54 year: 2013 end-page: 60 ident: b0110 article-title: Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size publication-title: Mater. Sci. Eng. A – volume: 554 start-page: 72 year: 2012 end-page: 78 ident: b0045 article-title: The prediction of hot deformation behavior in Fe–21Mn–2.5Si–1.5Al transformation-twinning induced plasticity steel publication-title: Mater. Sci. Eng. A – volume: 19 start-page: 5 year: 2013 end-page: 9 ident: b0170 article-title: Predicting the flow stress behavior of Ni–42.5Ti–3Cu during hot deformation using constitutive equations publication-title: Met. Mater. Int. – volume: 142 start-page: 415 year: 2003 end-page: 421 ident: b0255 article-title: Effect of competing hardening and softening mechanisms on the flow stress curve modeling of ultra-low carbon steel at high temperatures publication-title: J. Mater. Process. Technol. – volume: 21 start-page: 36 year: 2014 end-page: 45 ident: b0125 article-title: Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression publication-title: Int. J. Min. Met. Mater. – volume: 23 start-page: 1366 year: 2014 end-page: 1373 ident: b0010 article-title: Hot workability and flow characteristics of aluminum-5 publication-title: J. Mater. Eng. Perform. – volume: 84 start-page: 740 year: 2013 end-page: 750 ident: b0090 article-title: Hot deformation behaviors of Fe–30Mn–3Si–3Al TWIP steel during compression at elevated temperature and strain rate publication-title: Steel Res. Int. – volume: 43 start-page: 410 year: 2012 end-page: 414 ident: b0245 article-title: Influence of state-of-stress on dynamic recrystallization in a Ti modified austenitic stainless steel publication-title: Metall. Mater. Trans. A – volume: 88 start-page: 883 year: 2008 end-page: 897 ident: b0285 article-title: Evolution and characterization of dynamically recrystallized microstructure in a Ti modified austenitic stainless steel using ultrasonic and EBSD techniques publication-title: Philos. Mag. – volume: 528 start-page: 5073 year: 2011 end-page: 5080 ident: b0060 article-title: Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization publication-title: Mater. Sci. Eng. A – volume: 28 start-page: 36 year: 2012 end-page: 41 ident: b0105 article-title: An analysis to the kinetics of austenite recrystallization in Fe–30Mn–5Al steel publication-title: Mater. Manuf. Process. – volume: 29 start-page: 1865 year: 1981 end-page: 1875 ident: b0260 article-title: Kinetics of flow and strain-hardening publication-title: Acta Metall. – volume: 55 start-page: 560 year: 2014 end-page: 573 ident: b0030 article-title: Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation publication-title: Mater. Des. – volume: 59 start-page: 183 year: 2014 end-page: 192 ident: b0145 article-title: Hot deformation behavior and processing map of a typical Ni-based superalloy publication-title: Mater. Sci. Eng. A – volume: 53 start-page: 680 year: 2013 end-page: 689 ident: b0235 article-title: Hot deformation and dynamic recrystallization of 17–4 PH stainless steel publication-title: ISIJ Int. – volume: 81 start-page: 146 year: 2010 end-page: 149 ident: b0040 article-title: Effect of cold rolling and annealing on texture evolution and mechanical properties of IF steel sheet publication-title: Steel Res. Int. – volume: 57 start-page: 568 year: 2014 end-page: 577 ident: b0035 article-title: Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation publication-title: Mater. Des. – volume: 527 start-page: 5539 year: 2010 end-page: 5549 ident: b0065 article-title: Mesoscale simulation of the high-temperature austenitizing and dynamic recrystallization by coupling a cellular automaton with a topology deformation technique publication-title: Mater. Sci. Eng. A – volume: 23 start-page: 1834 year: 2014 end-page: 1844 ident: b0120 article-title: Elevated temperature mechanical behavior of severely deformed titanium publication-title: J. Mater. Eng. Perform. – volume: 528 start-page: 4620 year: 2011 end-page: 4629 ident: b0185 article-title: Effect of processing parameters on hot compressive deformation behavior of a new Ni–Cr–Co based P/M superalloy publication-title: Mater. Sci. Eng. A – volume: 23 start-page: 1424 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0150 article-title: Hot deformation behavior of Incoloy 901 through hot tensile testing publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-014-0863-5 – volume: 528 start-page: 5204 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0015 article-title: Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2011.03.025 – volume: 6 start-page: 423 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0020 article-title: Development of two-phase neural network-genetic algorithm hybrid model in modeling damage evolution in roll forming of aluminum sheet publication-title: Int. J. Mater. Form. doi: 10.1007/s12289-012-1096-5 – volume: 46 start-page: 69 year: 1997 ident: 10.1016/j.matdes.2015.04.004_b0220 article-title: Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior publication-title: Acta Mater. doi: 10.1016/S1359-6454(97)00233-4 – volume: 554 start-page: 72 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0045 article-title: The prediction of hot deformation behavior in Fe–21Mn–2.5Si–1.5Al transformation-twinning induced plasticity steel publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2012.06.014 – volume: 28 start-page: 36 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0105 article-title: An analysis to the kinetics of austenite recrystallization in Fe–30Mn–5Al steel publication-title: Mater. Manuf. Process. doi: 10.1080/10426914.2012.681413 – volume: 42 start-page: 2724 year: 2007 ident: 10.1016/j.matdes.2015.04.004_b0265 article-title: Kinetics, mechanism and modeling of microstructural evolution during thermo-mechanical processing of a 15Cr–15Ni–2.2Mo–Ti modified austenitic stainless steel publication-title: J. Mater. Sci. doi: 10.1007/s10853-006-1275-1 – volume: 527 start-page: 5539 year: 2010 ident: 10.1016/j.matdes.2015.04.004_b0065 article-title: Mesoscale simulation of the high-temperature austenitizing and dynamic recrystallization by coupling a cellular automaton with a topology deformation technique publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2010.05.021 – volume: 23 start-page: 1834 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0120 article-title: Elevated temperature mechanical behavior of severely deformed titanium publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-014-0947-2 – volume: 569 start-page: 54 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0110 article-title: Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2013.01.050 – volume: 560 start-page: 824 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0295 article-title: Dynamic recrystallization behavior during hot deformation and mechanical properties of 0.2μm SiCp reinforced Mg matrix composite publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2012.10.044 – volume: 55 start-page: 65 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0070 article-title: A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress–strain curves publication-title: Comput. Mater. Sci. doi: 10.1016/j.commatsci.2011.11.031 – volume: 19 start-page: 5 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0170 article-title: Predicting the flow stress behavior of Ni–42.5Ti–3Cu during hot deformation using constitutive equations publication-title: Met. Mater. Int. doi: 10.1007/s12540-013-1002-9 – year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0100 article-title: Austenite grain growth behavior of AISI 4140 alloy steel publication-title: Adv. Mech. Eng. – volume: 23 start-page: 3379 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0025 article-title: Effect of thermomechanical processing on the microstructure and mechanical properties of Nb–Ti–V microalloyed steel publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-014-1111-8 – volume: 21 start-page: 36 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0125 article-title: Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression publication-title: Int. J. Min. Met. Mater. doi: 10.1007/s12613-014-0862-4 – volume: 59 start-page: 183 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0145 article-title: Hot deformation behavior and processing map of a typical Ni-based superalloy publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2013.09.049 – volume: 550 start-page: 438 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0055 article-title: Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2012.10.114 – volume: 565 start-page: 722 year: 2007 ident: 10.1016/j.matdes.2015.04.004_b0305 article-title: Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2006.02.415 – volume: 528 start-page: 5073 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0060 article-title: Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2011.03.008 – volume: 623 start-page: 69 year: 2015 ident: 10.1016/j.matdes.2015.04.004_b0195 article-title: Hot deformation characteristics and processing map analysis for nickel-based corrosion resistant alloy publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2014.10.034 – volume: 42 start-page: 1062 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0290 article-title: A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-010-0517-7 – volume: 34 start-page: 2644 year: 2010 ident: 10.1016/j.matdes.2015.04.004_b0300 article-title: Modelling of recrystallization behavior and austenite grain size evolution during the hot rolling of GCr15 rod publication-title: Appl. Math. Model. doi: 10.1016/j.apm.2009.12.001 – volume: 598 start-page: 251 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0155 article-title: Effects of initial δ phase on the hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2014.01.029 – year: 2004 ident: 10.1016/j.matdes.2015.04.004_b0275 – volume: 45 start-page: 5645 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0240 article-title: Effect of strain rate on dynamic recrystallization behavior in a nitrogen enhanced 316L(N) publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-014-2480-1 – volume: 43 start-page: 410 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0245 article-title: Influence of state-of-stress on dynamic recrystallization in a Ti modified austenitic stainless steel publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-011-1015-2 – volume: 528 start-page: 4620 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0185 article-title: Effect of processing parameters on hot compressive deformation behavior of a new Ni–Cr–Co based P/M superalloy publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2011.02.051 – volume: 32 start-page: 1733 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0005 article-title: A critical review of experimental results and constitutive descriptions for metals and alloys in hot working publication-title: Mater. Des. doi: 10.1016/j.matdes.2010.11.048 – volume: 81 start-page: 146 year: 2010 ident: 10.1016/j.matdes.2015.04.004_b0040 article-title: Effect of cold rolling and annealing on texture evolution and mechanical properties of IF steel sheet publication-title: Steel Res. Int. – volume: 55 start-page: 949 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0165 article-title: Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy publication-title: Mater. Des. doi: 10.1016/j.matdes.2013.10.071 – volume: 152 start-page: 136 year: 2004 ident: 10.1016/j.matdes.2015.04.004_b0205 article-title: A new method for evaluation of friction in bulk metal forming publication-title: J. Mater. Process. Technol. doi: 10.1016/j.jmatprotec.2004.03.029 – volume: 88 start-page: 883 year: 2008 ident: 10.1016/j.matdes.2015.04.004_b0285 article-title: Evolution and characterization of dynamically recrystallized microstructure in a Ti modified austenitic stainless steel using ultrasonic and EBSD techniques publication-title: Philos. Mag. doi: 10.1080/14786430801989799 – volume: 30 start-page: 899 year: 2008 ident: 10.1016/j.matdes.2015.04.004_b0250 article-title: Theories and applicability of grain size piezometers: the role of dynamic recrystallization mechanisms publication-title: J. Struct. Geol. doi: 10.1016/j.jsg.2008.03.004 – volume: 56 start-page: 310 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0135 article-title: Dynamic recrystallization behavior and hot deformation characteristics in 4340 steel publication-title: Metallurgist doi: 10.1007/s11015-012-9577-9 – volume: 55 start-page: 560 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0030 article-title: Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation publication-title: Mater. Des. doi: 10.1016/j.matdes.2013.10.042 – volume: 62 start-page: 887 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0180 article-title: Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure publication-title: Mater. Charact. doi: 10.1016/j.matchar.2011.06.004 – volume: 142 start-page: 415 year: 2003 ident: 10.1016/j.matdes.2015.04.004_b0255 article-title: Effect of competing hardening and softening mechanisms on the flow stress curve modeling of ultra-low carbon steel at high temperatures publication-title: J. Mater. Process. Technol. doi: 10.1016/S0924-0136(03)00620-4 – volume: 53 start-page: 680 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0235 article-title: Hot deformation and dynamic recrystallization of 17–4 PH stainless steel publication-title: ISIJ Int. doi: 10.2355/isijinternational.53.680 – volume: 16 start-page: 1092 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0085 article-title: Effect of temperatures and strain rates on the average size of grains refined by dynamic recrystallization for as-extruded 42CrMo Steel publication-title: Mater. Res. doi: 10.1590/S1516-14392013005000091 – volume: 29 start-page: 2799 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0190 article-title: Effects of microstructure and γ′ distribution on the hot deformation behavior for a powder metallurgy superalloy FGH96 publication-title: J. Mater. Res. doi: 10.1557/jmr.2014.349 – volume: 29 start-page: 1865 year: 1981 ident: 10.1016/j.matdes.2015.04.004_b0260 article-title: Kinetics of flow and strain-hardening publication-title: Acta Metall. doi: 10.1016/0001-6160(81)90112-7 – volume: 540 start-page: 164 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0160 article-title: Hot deformation behavior of GH4169 superalloy associated with stick δ phase dissolution during isothermal compression process publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2012.01.121 – volume: 509 start-page: 9387 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0270 article-title: Modeling the initiation of dynamic recrystallization using a dynamic recovery model publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2011.07.014 – volume: 54 start-page: 2926 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0095 article-title: Low-carbon bainite steel with high strength and toughness processed by recrystallization controlled rolling and ultra fast cooling (RCR+UFC) publication-title: ISIJ Int. doi: 10.2355/isijinternational.54.2926 – volume: 59 start-page: 141 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0215 article-title: Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.02.052 – volume: 556 start-page: 260 year: 2012 ident: 10.1016/j.matdes.2015.04.004_b0080 article-title: The kinetics of dynamic recrystallization of 42CrMo steel publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2012.06.084 – volume: 57 start-page: 568 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0035 article-title: Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation publication-title: Mater. Des. doi: 10.1016/j.matdes.2013.12.072 – volume: 54 start-page: 113 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0050 article-title: An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization publication-title: Int. J. Plasticity doi: 10.1016/j.ijplas.2013.08.011 – volume: 528 start-page: 8565 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0115 article-title: Flow behavior and microstructural evolution during hot deformation of AISI Type 316L(N) austenitic stainless steel publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2011.08.012 – volume: 84 start-page: 740 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0090 article-title: Hot deformation behaviors of Fe–30Mn–3Si–3Al TWIP steel during compression at elevated temperature and strain rate publication-title: Steel Res. Int. doi: 10.1002/srin.201200254 – volume: 49 start-page: 3163 year: 2001 ident: 10.1016/j.matdes.2015.04.004_b0280 article-title: Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization publication-title: Acta Mater. doi: 10.1016/S1359-6454(01)00233-6 – volume: 23 start-page: 1077 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0140 article-title: Modeling the high temperature flow behavior and dynamic recrystallization kinetics of a medium carbon microalloyed steel publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-013-0815-5 – volume: 49 start-page: 953 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0210 article-title: Modeling approach and plastic deformation analysis of 6063 aluminum alloy during compression at elevated temperatures publication-title: Mater. Des. doi: 10.1016/j.matdes.2013.02.011 – volume: 587 start-page: 199 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0230 article-title: Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2013.10.180 – volume: 626 start-page: 76 year: 2015 ident: 10.1016/j.matdes.2015.04.004_b0200 article-title: Precipitate phase stability and compositional dependence on alloying additions in γ-γ’-δ-η Ni-base superalloys publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2014.11.155 – volume: 23 start-page: 1366 year: 2014 ident: 10.1016/j.matdes.2015.04.004_b0010 article-title: Hot workability and flow characteristics of aluminum-5wt.% B4C composite publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-014-0891-1 – volume: 140 start-page: 208 year: 2013 ident: 10.1016/j.matdes.2015.04.004_b0175 article-title: A study on hot deformation behavior of Ni–42.5Ti–7.5Cu alloy publication-title: Mater. Chem. Phys. doi: 10.1016/j.matchemphys.2013.03.022 – volume: 82 start-page: 934 year: 2011 ident: 10.1016/j.matdes.2015.04.004_b0130 article-title: Modeling of mechanical characteristics in hot deformation of 4130 steel publication-title: Steel Res. Int. doi: 10.1002/srin.201100024 – volume: 43 start-page: 1117 year: 2008 ident: 10.1016/j.matdes.2015.04.004_b0075 article-title: Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process publication-title: Comput. Mater. Sci. doi: 10.1016/j.commatsci.2008.03.010 – volume: 13 start-page: 343 year: 2005 ident: 10.1016/j.matdes.2015.04.004_b0225 article-title: Superplasticity of Ni-rich single phase NiAl intermetallics with large grains publication-title: Intermetallics doi: 10.1016/j.intermet.2004.07.008 |
| SSID | ssj0017112 |
| Score | 2.5133626 |
| Snippet | [Display omitted]
•Deformation parameters have significant influences on the grain microstructure.•The dislocation substructure is also very sensitive to the... Hot compressive tests of a nickel-based superalloy are performed under the strain rate range of 0.001-1s- 1 and deformation temperature range of 920-1040... |
| SourceID | proquest crossref elsevier |
| SourceType | Aggregation Database Enrichment Source Index Database Publisher |
| StartPage | 41 |
| SubjectTerms | Alloy Deformation Dislocations Dynamic recrystallization Evolution Grains Hot deformation Microstructural evolution Nickel base alloys Strain rate Substructures Superalloys |
| Title | Microstructural evolution of a nickel-based superalloy during hot deformation |
| URI | https://dx.doi.org/10.1016/j.matdes.2015.04.004 https://www.proquest.com/docview/1770323345 |
| Volume | 77 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LS8NAEF5qe9GD-MT6YgWvoU32lRxLsVSlvWiht2VfxUpJCm0F_72zyaaoCAWPCdklzOzOfLM78w1C94Qby0SiIyN4N6JOuQicnou6OgNvobSaCV87PBrz4YQ-Tdm0gfp1LYxPqwy2v7LppbUObzpBmp3lfN558dEDAF6YswxkxB5qJeBdu03U6j0-D8fbywQRl5ee4aiFZ3UFXZnmBbjQOs_bHbOS8zR0bPvDQ_2y1aUDGhyhw4Acca_6uWPUcPkJOvjGJ3iKRiOfXldRwno6Dew-wsrCxQwrnM9hzy4i77ksXm2W_jxqUXziqlYRvxVrbN22nPEMTQYPr_1hFPolRAZgl-8qr43hLtOOpJpQ6qzmSsQKIh6mZoYbalMHiI8za20GkZUTWaxSRWcASxi35Bw18yJ3FwjzxOrMJDFViR-dpZoJAmiLZMQpUGYbkVpG0gQycd_TYiHrrLF3WUlWesnKLpUg2TaKtqOWFZnGju9FLX75Y1FIsPc7Rt7V2pKwX_wliMpdsVnJWICNSwih7PLfs1-hff_kj3hjdo2aoFZ3A9hkrW_D2vsCmTXjSQ |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1LT9tAEB5ROLQ9IPpSgUK3Unu0Entf8aEH1BYlDcmlIHHb7mMiUkV2pEARv4s_yKy9jtqqEhISV9u7h2_H883sznwL8JErH6QuXOa16mcCLWZEepj1XUlsYZ2d6dg7PJmq4Zn4fi7PN-C264WJZZXJ97c-vfHW6Ukvodlbzue9HzF7oICX5mwSGZ0qK8d4c0152-rz6Cst8qeiOP52-mWYpasFMk8RSryA3XmvsHTIB44LgcEpq3NLyYG0M6-8CAOk4EjJEEJJSQjqMrcDK2bE4FIFTvM-ga2ohkW_1dbRaDycrg8vdN4csqatHVV2HXtNWRnFoQGjTnguG43VdEPcfxjxH25oCO94B7ZTpMqOWjBewAZWL-H5H_qFr2AyieV8rQRtlO9g-DtZMqtnzLJqTj5ikUWmDGx1tYz7X4v6hrW9keyivmQB1-2Tr-HsUUB8A5tVXeFbYKoIrvRFLmwRR5cDJzWn6I6XHC0Zzy7wDiPjk3h5vENjYboqtV-mRdZEZE1fGEJ2F7L1qGUr3nHP97qD3_xlhIb45Z6RH7rVMvR_xkMXW2F9tTK5Jp9acC7k3oNnfw9Ph6eTE3Mymo734Vl8E7eXc_kONmmJ8YDiokt3mOyQwc_HNv07fRMg5w |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Microstructural+evolution+of+a+nickel-based+superalloy+during+hot+deformation&rft.jtitle=Materials+in+engineering&rft.au=Chen%2C+Xiao-Min&rft.au=Lin%2C+Y+C&rft.au=Chen%2C+Ming-Song&rft.au=Li%2C+Hong-Bin&rft.date=2015-07-15&rft.issn=0261-3069&rft.volume=77&rft.spage=41&rft.epage=49&rft_id=info:doi/10.1016%2Fj.matdes.2015.04.004&rft.externalDBID=NO_FULL_TEXT |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0261-3069&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0261-3069&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0261-3069&client=summon |