Nanoindentation size effects of mechanical and creep performance in Ni-based superalloy
Nanoindentation technique was adopted to study indentation size effects of physical-mechanical and creep performance with various depths (200-2000 nm) in GH901 utilising sharp and spherical tip. Residual impressions of both indenters with pile-up patterns are discussed. Nanohardness, reduced modulus...
Saved in:
Published in | Materials science and technology Vol. 39; no. 12; pp. 1543 - 1554 |
---|---|
Main Authors | , , , , , , , , , , , |
Format | Journal Article |
Language | English |
Published |
London, England
Taylor & Francis
13.08.2023
SAGE Publications |
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | Nanoindentation technique was adopted to study indentation size effects of physical-mechanical and creep performance with various depths (200-2000 nm) in GH901 utilising sharp and spherical tip. Residual impressions of both indenters with pile-up patterns are discussed. Nanohardness, reduced modulus and elastic recovery rates curves versus maximum displacement of two tips are obtained and nanohardness size effects are discussed with different models for Berkovich tip. The data obtained with spherical indentation are analysed separately by establishing stress-strain diagram. The creep results using Berkovich tip indicate that creep strain rate declines while creep stress exponent first decreases and then increases with the increasing depth; the creep stress exponent (n) values, 2.39-7.35, imply the dominant creep deformation mechanism is dislocation control. |
---|---|
AbstractList | Nanoindentation technique was adopted to study indentation size effects of physical-mechanical and creep performance with various depths (200-2000 nm) in GH901 utilising sharp and spherical tip. Residual impressions of both indenters with pile-up patterns are discussed. Nanohardness, reduced modulus and elastic recovery rates curves versus maximum displacement of two tips are obtained and nanohardness size effects are discussed with different models for Berkovich tip. The data obtained with spherical indentation are analysed separately by establishing stress-strain diagram. The creep results using Berkovich tip indicate that creep strain rate declines while creep stress exponent first decreases and then increases with the increasing depth; the creep stress exponent (n) values, 2.39-7.35, imply the dominant creep deformation mechanism is dislocation control. |
Author | Zhou, Cheng Yang, Lin Chen, Keyan Yang, Jianping Mao, Guijun Zhou, Qinghua Guo, Yang Yang, Yuxin Xiong, Jiankun Li, Xia Nie, Fuheng Huang, Yanyan |
Author_xml | – sequence: 1 givenname: Yanyan surname: Huang fullname: Huang, Yanyan organization: Chengdu University – sequence: 2 givenname: Cheng surname: Zhou fullname: Zhou, Cheng organization: Chengdu University – sequence: 3 givenname: Keyan surname: Chen fullname: Chen, Keyan organization: Chengdu University – sequence: 4 givenname: Yuxin surname: Yang fullname: Yang, Yuxin email: yangyuxin@cdu.edu.cn organization: Chengdu University – sequence: 5 givenname: Jiankun surname: Xiong fullname: Xiong, Jiankun organization: Dongfang Turbine Co,. Ltd – sequence: 6 givenname: Jianping surname: Yang fullname: Yang, Jianping organization: Dongfang Turbine Co,. Ltd – sequence: 7 givenname: Yang surname: Guo fullname: Guo, Yang organization: Dongfang Turbine Co,. Ltd – sequence: 8 givenname: Guijun surname: Mao fullname: Mao, Guijun organization: Dongfang Turbine Co,. Ltd – sequence: 9 givenname: Lin surname: Yang fullname: Yang, Lin organization: Dongfang Turbine Co,. Ltd – sequence: 10 givenname: Fuheng surname: Nie fullname: Nie, Fuheng organization: Dongfang Turbine Co,. Ltd – sequence: 11 givenname: Xia surname: Li fullname: Li, Xia organization: Sichuan University – sequence: 12 givenname: Qinghua surname: Zhou fullname: Zhou, Qinghua email: qh.zhou@foxmail.com organization: Sichuan University |
BookMark | eNqFkE1LAzEQhoNUsK3-BCF_YGs2yW6yN6X4BVIviscwzU40ZZuUZIvUX-_W1que5jDv8zLzTMgoxICEXJZsVjLNrhivFdOinnHGxYyXSuhGn5BxqaQouJZqRMb7TLEPnZFJzivGWN00zZi8LSBEH1oMPfQ-Bpr9F1J0Dm2faXR0jfYDgrfQUQgttQlxQzeYXExrCBapD3ThiyVkbGneDhvourg7J6cOuowXxzklr3e3L_OH4un5_nF-81RYyVhfIEghUSinBBeuYhqrpahRaeakBMBGAa-5tJpbJrWzyGXpmHZQLRtXNVJMSXXotSnmnNCZTfJrSDtTMrO3Y37tmL0dc7QzcPzAZXhHs4rbFIYz_4WuD5APP-9_xtS1poddF5NLgw2fjfi74ht-GHzx |
CitedBy_id | crossref_primary_10_1007_s10853_024_09396_9 crossref_primary_10_1016_j_ijpvp_2024_105205 crossref_primary_10_1177_02670836241240245 crossref_primary_10_1016_j_measurement_2024_114671 crossref_primary_10_1016_j_ijpvp_2023_105036 crossref_primary_10_1016_j_jmrt_2024_04_214 crossref_primary_10_1108_ACMM_09_2023_2896 |
Cites_doi | 10.1179/174328006X102475 10.1006/jssc.2000.8834 10.1016/S0921-5093(00)00696-1 10.1016/j.jmps.2012.09.009 10.1016/S1003-6326(21)65788-6 10.1080/01418619908212037 10.1016/j.actamat.2017.06.021 10.1088/0022-3727/41/7/074005 10.1017/CBO9780511541285 10.1007/BF00400874 10.1016/j.msea.2014.04.035 10.1016/j.surfcoat.2012.05.020 10.1557/JMR.2002.0377 10.1016/j.jallcom.2017.03.175 10.1016/S0022-5096(97)00086-0 10.1016/S0921-5093(02)00309-X 10.1016/0378-3804(84)90015-9 10.1557/jmr.2009.0187 10.1007/BF01132393 10.1063/1.355787 10.1007/s10853-013-7160-9 10.1016/j.actamat.2007.08.044 10.1515/htmp-2014-0083 10.1557/JMR.2003.0020 10.1016/j.actamat.2004.01.016 10.1007/s11661-019-05160-w 10.1016/j.scriptamat.2007.10.013 10.1016/j.matdes.2016.05.036 10.1016/j.surfcoat.2012.03.087 10.1016/j.matlet.2007.04.068 10.1016/j.ijsolstr.2004.07.018 10.1016/0956-7151(93)90119-D 10.1007/s10853-011-6012-8 10.1557/PROC-308-613 10.1557/JMR.2002.0094 10.1016/0022-5096(93)90072-N 10.1016/j.scriptamat.2004.05.034 10.1557/jmr.2004.19.2.513 10.1007/s11661-004-0309-z 10.1016/S1359-6454(00)00140-3 10.1016/j.msea.2012.05.064 10.1016/j.msea.2004.01.061 10.1016/S0921-5093(03)00627-0 10.1016/S0022-5096(01)00103-X 10.1557/JMR.1995.2024 10.31399/asm.tb.stg2.9781627082679 10.1557/jmr.2004.19.1.3 10.1016/0022-5096(70)90029-3 10.1016/S0167-577X(98)00158-X 10.1557/JMR.1992.1564 |
ContentType | Journal Article |
Copyright | 2023 Institute of Materials, Minerals and Mining. 2023 2023 Institute of Materials, Minerals and Mining. |
Copyright_xml | – notice: 2023 Institute of Materials, Minerals and Mining. 2023 – notice: 2023 Institute of Materials, Minerals and Mining. |
DBID | AAYXX CITATION |
DOI | 10.1080/02670836.2023.2173898 |
DatabaseName | CrossRef |
DatabaseTitle | CrossRef |
DatabaseTitleList | CrossRef |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EISSN | 1743-2847 |
EndPage | 1554 |
ExternalDocumentID | 10_1080_02670836_2023_2173898 10.1080_02670836.2023.2173898 2173898 |
Genre | Research Article |
GrantInformation_xml | – fundername: Research Initiation Project of Chengdu University grantid: 2081920045 – fundername: National Natural Science Foundation of China grantid: 52205182 – fundername: Natural Science Foundation of Sichuan Province grantid: 2023NSFSC0916 |
GroupedDBID | -~X .DC 002 0BK 0R~ 1~B 29M 4.4 85S AAAVI AAJMT AALDU AAMIU AAPUL AAQRR ABBKH ABCCY ABDBF ABFIM ABJVF ABLIJ ABPTK ABQHQ ABXUL ACFOO ACGFS ACGOD ACIWK ACTIO ADCVX ADGTB AEGYZ AEISY AENEX AEYOC AFWLO AGDLA AHDLD AIJEM AIRXU AKBVH AKOOK AKRHH ALMA_UNASSIGNED_HOLDINGS ALQZU AQRUH AWQZV BLEHA CCCUG CS3 DKSSO DU5 E01 EAP EBS ESX GCUZY H13 HCLVR HZ~ IPNFZ KYCEM LJTGL M4Z MV1 O9- P75 P7B RIG RNANH ROSJB RTWRZ RWL TAE TCY TEX TFL TFT TFW TN5 TTHFI WH7 ZGOLN ~XQ .4S 3V. 6TJ 88I 8AF 8FE 8FG 8R4 8R5 8WZ A6W AANMX AATAA AATVF ABCES ABEFU ABGQB ABJCF ABPNF ABRHV ABUNW ABUWG ABXYU ACKDS ACLZH ACOXC ACUIR ACVGN ADUKL ADVBO ADYCX AEAXR AEXNY AFGMD AFKRA AGKLV AGQOX AIDUJ AIPZZ ALKDR AMATQ ARCSS ASQZU AWYRJ AZQEC BENPR BGLVJ BPHCQ BVUPT CCPQU CZ9 D1I DGEBU DGEYW DWNMW DWQXO EBKLY EDO EJD EMK EXXQB GNUQQ HCIFZ H~9 I-F J8X JHRKR KB. KC. M2P M2Q M46 MK~ NUSFT PDBOC PQQKQ PROAC Q1R Q2X QSQFL RNS S0X SC5 SCNPE SFC TCJPB TDBHL TFMCV TUS AAYXX ABKLS ARTOV CITATION |
ID | FETCH-LOGICAL-c400t-ea434e37f7323f508e5b36e780f44aae97a2624c82c048fce241f08fa5b9f5943 |
ISSN | 0267-0836 |
IngestDate | Fri Aug 23 01:41:25 EDT 2024 Tue Jul 16 20:50:21 EDT 2024 Wed Jun 28 04:11:02 EDT 2023 |
IsDoiOpenAccess | false |
IsOpenAccess | true |
IsPeerReviewed | true |
IsScholarly | true |
Issue | 12 |
Keywords | creep performance indentation size effect Ni-based superalloy Nanoindentation physical and mechanical properties |
Language | English |
LinkModel | OpenURL |
MergedId | FETCHMERGED-LOGICAL-c400t-ea434e37f7323f508e5b36e780f44aae97a2624c82c048fce241f08fa5b9f5943 |
OpenAccessLink | https://journals.sagepub.com/doi/pdf/10.1080/02670836.2023.2173898 |
PageCount | 12 |
ParticipantIDs | sage_journals_10_1080_02670836_2023_2173898 informaworld_taylorfrancis_310_1080_02670836_2023_2173898 crossref_primary_10_1080_02670836_2023_2173898 |
PublicationCentury | 2000 |
PublicationDate | 2023-08-13 |
PublicationDateYYYYMMDD | 2023-08-13 |
PublicationDate_xml | – month: 08 year: 2023 text: 2023-08-13 day: 13 |
PublicationDecade | 2020 |
PublicationPlace | London, England |
PublicationPlace_xml | – name: London, England |
PublicationTitle | Materials science and technology |
PublicationYear | 2023 |
Publisher | Taylor & Francis SAGE Publications |
Publisher_xml | – name: Taylor & Francis – name: SAGE Publications |
References | Durst, Göken, Pharr 2008; 41 Ahn, Kwon 2000; 285 Ngan, Wang, Tang 2005; 42 Takagi, Fujiwara, Kakehi 2004; 387-389 Sambhava, Nautiyal, Jain 2016; 105 Guzman, Neubauer, Flinn 1993; 308 Oliver, Pharr 2004; 19 Wang, Mukai, Nieh 2009; 24 Fleck, Hutchinson 2001; 41 Nix, Gao 1998; 46 Johnson 1970; 18 Schöberl, Gupta, Fratzl 2003; 363 Li, Bradt 1993; 28 Chen, Chen, Duh 2013; 231 Han, Lavernia, Mohamed 2004; 35 Machaka, Derry, Sigalas 2014; 607 Poisl, Oliver, Fabes 1995; 10 Jacq, Lormand, Nelias 2003; 342 Nautiyal, Jain, Agarwal 2015 Ruud, Jervis, Spaepen 1994; 75 Su, Herbert, Sohn 2013; 61 Das, Albert, Bhaduri 2012; 552 Li, Ngan 2004; 19 Gang, Nix 2004; 51 Dodangeh, Shahri, Abbasi 2015; 34 Tiwari, Hihara 2012; 206 Ma, Li, Zhao 2017; 709 Kral, Dvorak, Zherebtsov 2013; 48 Feng, Nix 2004; 51 Zhu, Xu, Wang 2011; 47 Oyen, Cook 2003; 18 Coakley, Ma, Frost 2017; 135 Alcala, Barone, Anglada 2000; 48 Oliver, Pharr 1992; 7 Li, Warren 1993; 41 Wang, Raabe, Klüber 2004; 52 Abzianidze, Eristavi, Shalamberidze 2000; 154 Durst, Franke, Böhner 2007; 55 Zhang, Li, Wu 2022; 32 Kommel, Kimmari, Viljus 2012; 18 Nie, Zhao, Mo 2008; 62 Babini, Bellosi, Galassi 1987; 22 Lim, Chaudhri 1999; 79 Ngan, Tang 2002; 17 Sawant, Tin 2008; 58 Gong, Wu, Guan 1999; 38 Mukhopadhyay, Paufler 2006; 51 Feng, Ngan 2002; 17 Kucharski, Woźniacka 2019; 50 Swadener, George, Pharr 2002; 50 Atkins 1984; 9 bibr48-02670836.2023.2173898 bibr52-02670836.2023.2173898 bibr24-02670836.2023.2173898 bibr11-02670836.2023.2173898 bibr36-02670836.2023.2173898 bibr53-02670836.2023.2173898 bibr49-02670836.2023.2173898 bibr37-02670836.2023.2173898 Nautiyal P (bibr54-02670836.2023.2173898) 2015 bibr41-02670836.2023.2173898 bibr25-02670836.2023.2173898 bibr40-02670836.2023.2173898 bibr50-02670836.2023.2173898 bibr42-02670836.2023.2173898 bibr18-02670836.2023.2173898 bibr5-02670836.2023.2173898 Kommel L (bibr8-02670836.2023.2173898) 2012; 18 bibr34-02670836.2023.2173898 bibr26-02670836.2023.2173898 bibr51-02670836.2023.2173898 bibr43-02670836.2023.2173898 bibr6-02670836.2023.2173898 bibr19-02670836.2023.2173898 bibr7-02670836.2023.2173898 bibr27-02670836.2023.2173898 bibr10-02670836.2023.2173898 bibr35-02670836.2023.2173898 bibr44-02670836.2023.2173898 bibr28-02670836.2023.2173898 bibr32-02670836.2023.2173898 bibr3-02670836.2023.2173898 bibr31-02670836.2023.2173898 bibr16-02670836.2023.2173898 Sims CT (bibr12-02670836.2023.2173898) 1981 bibr33-02670836.2023.2173898 bibr29-02670836.2023.2173898 bibr4-02670836.2023.2173898 bibr17-02670836.2023.2173898 bibr20-02670836.2023.2173898 bibr45-02670836.2023.2173898 bibr9-02670836.2023.2173898 bibr46-02670836.2023.2173898 bibr38-02670836.2023.2173898 bibr13-02670836.2023.2173898 bibr14-02670836.2023.2173898 bibr1-02670836.2023.2173898 bibr21-02670836.2023.2173898 bibr47-02670836.2023.2173898 bibr39-02670836.2023.2173898 bibr23-02670836.2023.2173898 bibr2-02670836.2023.2173898 bibr15-02670836.2023.2173898 bibr22-02670836.2023.2173898 bibr30-02670836.2023.2173898 |
References_xml | – volume: 19 start-page: 513 issue: 2 year: 2004 end-page: 522 article-title: Size effects of nanoindentation creep publication-title: J Mater Res contributor: fullname: Ngan – volume: 308 start-page: 613 year: 1993 end-page: 618 article-title: The role of indentation depth on the measured hardness of materials publication-title: Mrs Proc contributor: fullname: Flinn – volume: 709 start-page: 322 year: 2017 end-page: 328 article-title: Indenter load effects on creep deformation behavior for Ti-10V-2Fe-3Al alloy at room temperature publication-title: J Alloys Compd contributor: fullname: Zhao – volume: 52 start-page: 2229 issue: 8 year: 2004 end-page: 2238 article-title: Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals publication-title: Acta Mater contributor: fullname: Klüber – volume: 7 start-page: 1564 year: 1992 end-page: 1583 article-title: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments publication-title: J Mater Res contributor: fullname: Pharr – volume: 231 start-page: 332 year: 2013 end-page: 336 article-title: Characterization of mechanical properties and adhesion of Ta–Zr–Cu–Al–Ag thin film metallic glasses publication-title: Surf Coat Technol contributor: fullname: Duh – year: 2015 article-title: Study of nanoindentation induced creep in pure Mg publication-title: The10th International Conference on Magnesium Alloys and Their Applications contributor: fullname: Agarwal – volume: 58 start-page: 275 issue: 4 year: 2008 end-page: 278 article-title: High temperature nanoindentation of a Re-bearing single crystal Ni-base superalloy publication-title: Scr Mater contributor: fullname: Tin – volume: 135 start-page: 77 year: 2017 end-page: 87 article-title: Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ′ microstructure publication-title: Acta Mater contributor: fullname: Frost – volume: 35 start-page: 1343 issue: 4 year: 2004 end-page: 1350 article-title: Dislocation structure and deformation in iron processed by equal-channel-angular pressing publication-title: Metall Mater Trans A contributor: fullname: Mohamed – volume: 41 start-page: 074005 issue: 7 year: 2008 article-title: Indentation size effect in spherical and pyramidal indentations publication-title: J Phys D: Appl Phys contributor: fullname: Pharr – volume: 61 start-page: 517 issue: 2 year: 2013 end-page: 536 article-title: Measurement of power-law creep parameters by instrumented indentation methods publication-title: J Mech Phys Solids contributor: fullname: Sohn – volume: 47 start-page: 2122 issue: 5 year: 2011 end-page: 2126 article-title: Microstructure and nanoindentation measurement of residual stress in Fe-based coating by laser cladding publication-title: J Mater Sci contributor: fullname: Wang – volume: 363 start-page: 211 issue: 1-2 year: 2003 end-page: 220 article-title: Measurements of mechanical properties in Ni-base superalloys using nanoindentation and atomic force microscopy publication-title: Mater Sci Eng, A contributor: fullname: Fratzl – volume: 24 start-page: 1615 issue: 5 year: 2009 end-page: 1618 article-title: Room temperature creep of fine-grained pure Mg: a direct comparison between nanoindentation and uniaxial tension publication-title: J Mater Res contributor: fullname: Nieh – volume: 607 start-page: 521 year: 2014 end-page: 524 article-title: Room temperature nanoindentation creep of hot-pressed B6O publication-title: Mater Sci Eng A contributor: fullname: Sigalas – volume: 48 start-page: 3451 issue: 13 year: 2000 end-page: 3464 article-title: The influence of plastic hardening on surface deformation modes around Vickers and spherical indents publication-title: Acta Mater contributor: fullname: Anglada – volume: 34 start-page: 821 issue: 8 year: 2015 end-page: 826 article-title: The effects of carbon content on the microstructure and 650°C tensile properties of Incoloy 901 Superalloy publication-title: High Temp Mater Processes contributor: fullname: Abbasi – volume: 9 start-page: 224 issue: 2 year: 1984 end-page: 225 article-title: Deformation-mechanism maps (the plasticity and creep of metals and ceramics) publication-title: J Mechl Work Technol contributor: fullname: Atkins – volume: 19 start-page: 3 year: 2004 end-page: 20 article-title: Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology publication-title: J Mater Res contributor: fullname: Pharr – volume: 10 start-page: 2024 issue: 08 year: 1995 end-page: 2032 article-title: The relationship between indentation and uniaxial creep in amorphous selenium publication-title: J Mater Res contributor: fullname: Fabes – volume: 51 start-page: 209 issue: 4 year: 2006 end-page: 245 article-title: Micro- and nanoindentation techniques for mechanical characterisation of materials publication-title: Int Mater Rev contributor: fullname: Paufler – volume: 105 start-page: 142 year: 2016 end-page: 151 article-title: Model based phenomenological and experimental investigation of nanoindentation creep in pure Mg and AZ61 alloy publication-title: Mater Des contributor: fullname: Jain – volume: 552 start-page: 419 year: 2012 end-page: 426 article-title: Understanding room temperature deformation behavior through indentation studies on modified 9Cr–1Mo steel weldments publication-title: Mater Sci Eng, A contributor: fullname: Bhaduri – volume: 17 start-page: 660 issue: 3 year: 2002 end-page: 668 article-title: Effects of creep and thermal drift on modulus measurement using depth-sensing indentation publication-title: J Mater Res contributor: fullname: Ngan – volume: 18 start-page: 115 issue: 2 year: 1970 end-page: 126 article-title: The correlation of indentation experiments publication-title: J Mech Phys Solids contributor: fullname: Johnson – volume: 42 start-page: 1831 issue: 5-6 year: 2005 end-page: 1846 article-title: Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation publication-title: Int J Solids Struct contributor: fullname: Tang – volume: 51 start-page: 599 issue: 6 year: 2004 end-page: 603 article-title: Indentation size effect in MgO publication-title: Scr Mater contributor: fullname: Nix – volume: 50 start-page: 681 issue: 4 year: 2002 end-page: 694 article-title: The correlation of the indentation size effect measured with indenters of various shapes publication-title: J Mech Phys Solids contributor: fullname: Pharr – volume: 154 start-page: 191 issue: 1 year: 2000 end-page: 193 article-title: Strength and creep in boron carbide (B4C) and aluminum dodecaboride (α-AlB12) publication-title: J Solid State Chem contributor: fullname: Shalamberidze – volume: 18 start-page: 139 issue: 1 year: 2003 end-page: 150 article-title: Load–displacement behavior during sharp indentation of viscous–elastic–plastic materials publication-title: J Mater Res contributor: fullname: Cook – volume: 28 start-page: 917 issue: 4 year: 1993 end-page: 926 article-title: The microhardness indentation load/size effect in rutile and cassiterite single crystals publication-title: J Mater Sci contributor: fullname: Bradt – volume: 50 start-page: 2139 issue: 5 year: 2019 end-page: 2154 article-title: Size effect in single crystal copper examined with spherical indenters publication-title: Metall Mater Trans A contributor: fullname: Woźniacka – volume: 51 start-page: 599 issue: 6 year: 2004 end-page: 603 article-title: Indentation size effect in MgO publication-title: Scr Mater contributor: fullname: Nix – volume: 206 start-page: 4606 issue: 22 year: 2012 end-page: 4618 article-title: Effect of inorganic constituent on nanomechanical and tribological properties of polymer, quasi-ceramic and hybrid coatings publication-title: Surf Coat Technol contributor: fullname: Hihara – volume: 55 start-page: 6825 issue: 20 year: 2007 end-page: 6833 article-title: Indentation size effect in Ni–Fe solid solutions publication-title: Acta Mater contributor: fullname: Böhner – volume: 46 start-page: 411 issue: 3 year: 1998 end-page: 425 article-title: Indentation size effects in crystalline materials: a law for strain gradient plasticity publication-title: J Mech Phys Solids contributor: fullname: Gao – volume: 75 start-page: 4969 issue: 10 year: 1994 end-page: 4974 article-title: Nanoindentation of Ag/Ni multilayered thin films publication-title: J Appl Phys contributor: fullname: Spaepen – volume: 22 start-page: 1687 issue: 5 year: 1987 end-page: 1693 article-title: Characterization of hot-pressed silicon nitride-based materials by microhardness measurements publication-title: J Mater Sci contributor: fullname: Galassi – volume: 17 start-page: 2604 issue: 10 year: 2002 end-page: 2610 article-title: Viscoelastic effects during unloading in depth-sensing indentation publication-title: J Mater Res contributor: fullname: Tang – volume: 285 start-page: 172 issue: 1-2 year: 2000 end-page: 179 article-title: Micromechanical estimation of composite hardness using nanoindentation technique for thin-film coated system publication-title: Mater Sci Eng, A contributor: fullname: Kwon – volume: 38 start-page: 197 issue: 3 year: 1999 end-page: 201 article-title: Analysis of the indentation size effect on the apparent hardness for ceramics publication-title: Mater Lett contributor: fullname: Guan – volume: 79 start-page: 2979 issue: 12 year: 1999 end-page: 3000 article-title: The effect of the indenter load on the nanohardness of ductile metals: an experimental study on polycrystalline work-hardened and annealed oxygen-free copper publication-title: Philos Mag A contributor: fullname: Chaudhri – volume: 41 start-page: 3065 issue: 10 year: 1993 end-page: 3069 article-title: A model for nano-indentation creep publication-title: Acta Metall Mater contributor: fullname: Warren – volume: 41 start-page: 1825 issue: 12 year: 2001 end-page: 1857 article-title: A phenomenological theory for strain gradient effects in plasticity publication-title: J Mech Phys Solids contributor: fullname: Hutchinson – volume: 48 start-page: 4789 issue: 13 year: 2013 end-page: 4795 article-title: Effect of severe plastic deformation on creep behaviour of a Ti–6Al–4 V alloy publication-title: J Mater Sci contributor: fullname: Zherebtsov – volume: 342 start-page: 311 issue: 1-2 year: 2003 end-page: 319 article-title: On the influence of residual stresses in determining the micro-yield stress profile in a nitrided steel by nano-indentation publication-title: Mater Sci Eng, A contributor: fullname: Nelias – volume: 62 start-page: 51 issue: 1 year: 2008 end-page: 53 article-title: Room temperature creep and its effect on flow stress in a X70 pipeline steel publication-title: Mater Lett contributor: fullname: Mo – volume: 18 start-page: 28 issue: 1 year: 2012 end-page: 33 article-title: Phases micromechanical properties of Ni-base superalloy measured by nanoindentation publication-title: Mater Sci contributor: fullname: Viljus – volume: 387-389 start-page: 348 year: 2004 end-page: 351 article-title: Measuring Young's modulus of Ni-based superalloy single crystals at elevated temperatures through microindentation publication-title: Mater Sci Eng, A contributor: fullname: Kakehi – volume: 32 start-page: 206 issue: 1 year: 2022 end-page: 216 article-title: Effects of loading rate and peak load on nanoindentation creep behavior of DD407Ni-base single crystal superalloy publication-title: Trans Nonferr Metal Soc China contributor: fullname: Wu – ident: bibr37-02670836.2023.2173898 doi: 10.1179/174328006X102475 – ident: bibr48-02670836.2023.2173898 doi: 10.1006/jssc.2000.8834 – ident: bibr1-02670836.2023.2173898 doi: 10.1016/S0921-5093(00)00696-1 – ident: bibr47-02670836.2023.2173898 doi: 10.1016/j.jmps.2012.09.009 – ident: bibr16-02670836.2023.2173898 doi: 10.1016/S1003-6326(21)65788-6 – ident: bibr40-02670836.2023.2173898 doi: 10.1080/01418619908212037 – ident: bibr15-02670836.2023.2173898 doi: 10.1016/j.actamat.2017.06.021 – ident: bibr41-02670836.2023.2173898 doi: 10.1088/0022-3727/41/7/074005 – ident: bibr11-02670836.2023.2173898 doi: 10.1017/CBO9780511541285 – ident: bibr35-02670836.2023.2173898 doi: 10.1007/BF00400874 – ident: bibr17-02670836.2023.2173898 doi: 10.1016/j.msea.2014.04.035 – ident: bibr28-02670836.2023.2173898 doi: 10.1016/j.surfcoat.2012.05.020 – ident: bibr34-02670836.2023.2173898 doi: 10.1557/JMR.2002.0377 – ident: bibr52-02670836.2023.2173898 doi: 10.1016/j.jallcom.2017.03.175 – ident: bibr22-02670836.2023.2173898 doi: 10.1016/S0022-5096(97)00086-0 – ident: bibr3-02670836.2023.2173898 doi: 10.1016/S0921-5093(02)00309-X – ident: bibr51-02670836.2023.2173898 doi: 10.1016/0378-3804(84)90015-9 – ident: bibr50-02670836.2023.2173898 doi: 10.1557/jmr.2009.0187 – ident: bibr21-02670836.2023.2173898 doi: 10.1007/BF01132393 – year: 2015 ident: bibr54-02670836.2023.2173898 publication-title: The10th International Conference on Magnesium Alloys and Their Applications contributor: fullname: Nautiyal P – ident: bibr2-02670836.2023.2173898 doi: 10.1063/1.355787 – ident: bibr4-02670836.2023.2173898 doi: 10.1007/s10853-013-7160-9 – volume-title: Superalloys II year: 1981 ident: bibr12-02670836.2023.2173898 contributor: fullname: Sims CT – ident: bibr18-02670836.2023.2173898 doi: 10.1016/j.actamat.2007.08.044 – ident: bibr23-02670836.2023.2173898 doi: 10.1515/htmp-2014-0083 – ident: bibr32-02670836.2023.2173898 doi: 10.1557/JMR.2003.0020 – ident: bibr26-02670836.2023.2173898 doi: 10.1016/j.actamat.2004.01.016 – ident: bibr24-02670836.2023.2173898 doi: 10.1007/s11661-019-05160-w – ident: bibr10-02670836.2023.2173898 doi: 10.1016/j.scriptamat.2007.10.013 – ident: bibr53-02670836.2023.2173898 doi: 10.1016/j.matdes.2016.05.036 – ident: bibr43-02670836.2023.2173898 doi: 10.1016/j.surfcoat.2012.03.087 – ident: bibr14-02670836.2023.2173898 doi: 10.1016/j.matlet.2007.04.068 – ident: bibr33-02670836.2023.2173898 doi: 10.1016/j.ijsolstr.2004.07.018 – ident: bibr30-02670836.2023.2173898 doi: 10.1016/0956-7151(93)90119-D – ident: bibr6-02670836.2023.2173898 doi: 10.1007/s10853-011-6012-8 – ident: bibr20-02670836.2023.2173898 doi: 10.1557/PROC-308-613 – ident: bibr29-02670836.2023.2173898 doi: 10.1557/JMR.2002.0094 – ident: bibr38-02670836.2023.2173898 doi: 10.1016/0022-5096(93)90072-N – ident: bibr39-02670836.2023.2173898 doi: 10.1016/j.scriptamat.2004.05.034 – ident: bibr45-02670836.2023.2173898 doi: 10.1557/jmr.2004.19.2.513 – ident: bibr49-02670836.2023.2173898 doi: 10.1007/s11661-004-0309-z – ident: bibr25-02670836.2023.2173898 doi: 10.1016/S1359-6454(00)00140-3 – ident: bibr5-02670836.2023.2173898 doi: 10.1016/j.msea.2012.05.064 – ident: bibr31-02670836.2023.2173898 doi: 10.1016/j.msea.2004.01.061 – ident: bibr9-02670836.2023.2173898 doi: 10.1016/S0921-5093(03)00627-0 – volume: 18 start-page: 28 issue: 1 year: 2012 ident: bibr8-02670836.2023.2173898 publication-title: Mater Sci contributor: fullname: Kommel L – ident: bibr44-02670836.2023.2173898 doi: 10.1016/S0022-5096(01)00103-X – ident: bibr46-02670836.2023.2173898 doi: 10.1557/JMR.1995.2024 – ident: bibr13-02670836.2023.2173898 doi: 10.31399/asm.tb.stg2.9781627082679 – ident: bibr7-02670836.2023.2173898 doi: 10.1557/jmr.2004.19.1.3 – ident: bibr42-02670836.2023.2173898 doi: 10.1016/0022-5096(70)90029-3 – ident: bibr19-02670836.2023.2173898 doi: 10.1016/j.scriptamat.2004.05.034 – ident: bibr36-02670836.2023.2173898 doi: 10.1016/S0167-577X(98)00158-X – ident: bibr27-02670836.2023.2173898 doi: 10.1557/JMR.1992.1564 |
SSID | ssj0006999 |
Score | 2.4521112 |
Snippet | Nanoindentation technique was adopted to study indentation size effects of physical-mechanical and creep performance with various depths (200-2000 nm) in GH901... Nanoindentation technique was adopted to study indentation size effects of physical-mechanical and creep performance with various depths (200–2000 nm) in GH901... |
SourceID | crossref sage informaworld |
SourceType | Aggregation Database Publisher |
StartPage | 1543 |
SubjectTerms | creep performance indentation size effect Nanoindentation Ni-based superalloy physical and mechanical properties |
Title | Nanoindentation size effects of mechanical and creep performance in Ni-based superalloy |
URI | https://www.tandfonline.com/doi/abs/10.1080/02670836.2023.2173898 https://journals.sagepub.com/doi/full/10.1080/02670836.2023.2173898 |
Volume | 39 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1Lb9QwELaW9gKHiqdoocgHbqusip2Xjy20WoHKaStaLpGTHYuVIFmxiVT11n_OTOwkDl3xvERRsslkPV9mxpOZz4y9Bg0YDEEUoLeSQWhCFaRGRgEYMLoQqYmXlO84_xjPL8L3l9HlZHLrd5fU-ay42dpX8i9axWOoV-qS_QvN9jfFA7iP-sUtahi3f6RjNI0V0R2WrmRws7oZVWh8A-rr7fkAMECENREV960CqxKhEJAnW043zZryU1-r0Yfec13bfzLtGoDakss7Cfl54xLPV2hdBsR9_lI19qs-OBfZlhJYW_cBvF9eddc3144M3OUihKTkqm0lbdGzuLMsiGfNBFpkosK2jsdaW-JHJf_om2PLbdTBTnjGFaM96TlqioS2OgFXNYkCSd6MHnSGMy8MzdLB6_W1iO7MPbYrEhXh_H33-OTdyVnvzmPVLkLaP3_XBkYE7dtEjAKcEf3tqFiwjV8WD9mem3jwY4uiR2wC5WP2wKOjfMI-_YQnTnjiDk-8MnzAE0cU8BZP3MMTX5W8wxMf8PSUXZydLt7OA7fwRlCgSa8D0KEMQSYmkUIaDOEhymUMSXpkwlBrUIkWsQiLVBToAEwBGAaao9ToKFcmUqF8xnbKqoTnjC_zgjgHE02VA6rA2bWAJE_TQqEhSJbxPpt1o5WtLb9K9qajrXXDm9HwZm5495nyxzSrW8wZC7dM_ubaKSkgc6_w5teSDv5D0gt2f3g_XrKd-nsDhxi91vkrh68fIHGS-w |
link.rule.ids | 315,786,790,27957,27958 |
linkProvider | EBSCOhost |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Nanoindentation+size+effects+of+mechanical+and+creep+performance+in+Ni-based+superalloy&rft.jtitle=Materials+science+and+technology&rft.au=Huang%2C+Yanyan&rft.au=Zhou%2C+Cheng&rft.au=Chen%2C+Keyan&rft.au=Yang%2C+Yuxin&rft.date=2023-08-13&rft.pub=Taylor+%26+Francis&rft.issn=0267-0836&rft.eissn=1743-2847&rft.volume=39&rft.issue=12&rft.spage=1543&rft.epage=1554&rft_id=info:doi/10.1080%2F02670836.2023.2173898&rft.externalDocID=2173898 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0267-0836&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0267-0836&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0267-0836&client=summon |