Can a partial volume edge effect reduction algorithm improve the repeatability of subject-specific finite element models of femurs obtained from CT data?

• Published in: Computer methods in biomechanics and biomedical engineering Vol. 17; no. 3; pp. 204 - 209
• Main Authors: Peleg, Eran, Herblum, Ryan, Beek, Maarten, Joskowicz, Leo, Liebergall, Meir, Mosheiff, Rami, Whyne, Cari
• Format: Journal Article
• Language: English
• Published: England Taylor & Francis 17.02.2014
• Subjects: Algorithms; Femur - diagnostic imaging; Finite Element Analysis; Humans; inter-operative; Models, Biological; partial volume edge effects; patient specific; Reproducibility of Results; strain; stress; Stress, Mechanical; surface adjustment; Tomography, X-Ray Computed
• ISSN: 1025-5842; 1476-8259; 1476-8259
• DOI: 10.1080/10255842.2012.673595

The reliability of patient-specific finite element (FE) modelling is dependent on the ability to provide repeatable analyses. Differences of inter-operator generated grids can produce variability in strain and stress readings at a desired location, which are magnified at the surface of the model as a result of the partial volume edge effects (PVEEs). In this study, a new approach is introduced based on an in-house developed algorithm which adjusts the location of the model's surface nodes to a consistent predefined threshold Hounsfield unit value. Three cadaveric human femora specimens were CT scanned, and surface models were created after a semi-automatic segmentation by three different experienced operators. A FE analysis was conducted for each model, with and without applying the surface-adjustment algorithm (a total of 18 models), implementing identical boundary conditions. Maximum principal strain and stress and spatial coordinates were probed at six equivalent surface nodes from the six generated models for each of the three specimens at locations commonly utilised for experimental strain guage measurement validation. A Wilcoxon signed-ranks test was conducted to determine inter-operator variability and the impact of the PVEE-adjustment algorithm. The average inter-operator difference in stress values was significantly reduced after applying the adjustment algorithm (before: 3.32 ± 4.35 MPa, after: 1.47 ± 1.77 MPa, p = 0.025). Strain values were found to be less sensitive to inter-operative variability (p = 0.286). In summary, the new approach as presented in this study may provide a means to improve the repeatability of subject-specific FE models of bone obtained from CT data.