The effect of cutting parameters for the finest surface roughness during the turning of AISI 1045 with a WC insert
Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on the surface roughness has yet to be definitely determined. In the present study, the cause of the contradictory effect of the cutting condition was explained. As a result,...
Saved in:
| Published in | Journal of mechanical science and technology Vol. 29; no. 8; pp. 3437 - 3445 |
|---|---|
| Main Authors | , |
| Format | Journal Article |
| Language | English |
| Published |
Seoul
Korean Society of Mechanical Engineers
01.08.2015
Springer Nature B.V 대한기계학회 |
| Subjects | |
| Online Access | Get full text |
| ISSN | 1738-494X 1976-3824 |
| DOI | 10.1007/s12206-015-0742-5 |
Cover
| Abstract | Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on the surface roughness has yet to be definitely determined. In the present study, the cause of the contradictory effect of the cutting condition was explained. As a result, the cutting velocity was found to be an improper cutting parameter for explaining variations in surface roughness. It was also discovered that the depth of cut could affect the surface roughness, contrary to the claims of most publications. Consequently, the optimum cutting conditions were determined for the finest surface roughness, and were proven to be significantly better than those obtained using the Taguchi method and methods described in the literature. |
|---|---|
| AbstractList | Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on thesurface roughness has yet to be definitely determined. In the present study, the cause of the contradictory effect of the cutting conditionwas explained. As a result, the cutting velocity was found to be an improper cutting parameter for explaining variations in surface roughness.
It was also discovered that the depth of cut could affect the surface roughness, contrary to the claims of most publications. Consequently,the optimum cutting conditions were determined for the finest surface roughness, and were proven to be significantly better thanthose obtained using the Taguchi method and methods described in the literature. KCI Citation Count: 0 Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on the surface roughness has yet to be definitely determined. In the present study, the cause of the contradictory effect of the cutting condition was explained. As a result, the cutting velocity was found to be an improper cutting parameter for explaining variations in surface roughness. It was also discovered that the depth of cut could affect the surface roughness, contrary to the claims of most publications. Consequently, the optimum cutting conditions were determined for the finest surface roughness, and were proven to be significantly better than those obtained using the Taguchi method and methods described in the literature. |
| Author | Kwon, Won Tae Kim, Yong-Sun |
| Author_xml | – sequence: 1 givenname: Yong-Sun surname: Kim fullname: Kim, Yong-Sun organization: Department of Mechanical and Information Engineering, University of Seoul – sequence: 2 givenname: Won Tae surname: Kwon fullname: Kwon, Won Tae email: kwon@uos.ac.kr organization: Faculty of Department of Mechanical and Information Engineering, University of Seoul |
| BackLink | https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002016550$$DAccess content in National Research Foundation of Korea (NRF) |
| BookMark | eNp9kUuLFDEUhQsZwXn4A9wF3OiiNO-klk3jo2FAcFpmdiFVlXRnpjtpb1IM_ntT1ixkQFf3cvnOvTk5F81ZTNE1zRuCPxCM1cdMKMWyxUS0WHHaihfNOemUbJmm_Kz2iumWd_zuVXOR8z3GknJCzhvY7h1y3ruhoOTRMJUS4g6dLNijKw4y8glQqZAP0eWC8gTeDg5Bmnb7OslonGCWzEyZIM593bTa3GwQwVygx1D2yKLbNQoxOyhXzUtvD9m9fqqXzY_Pn7brr-31ty-b9eq6HZhmpe2F7DqtRu29oP042l4qIkbqe81lLwUhve2ExSPrmHaaSNkJKaRjUoy-Hy27bN4veyN48zAEk2z4U3fJPIBZfd9uDMFCKckr-25hT5B-TtWnOYY8uMPBRpembOr34eoFU1bRt8_Q-1RtVyeVwpQyzYWuFFmoAVLO4Lw5QTha-FVPmjkxsyRmamJmTsyIqlHPNEMotoQUC9hw-K-SLsp8mrNw8Neb_in6De2Eqk8 |
| CitedBy_id | crossref_primary_10_1016_j_jmapro_2021_03_041 crossref_primary_10_36306_konjes_1064663 |
| Cites_doi | 10.1016/S0890-6955(03)00131-7 10.1016/j.ijmachtools.2004.09.007 10.1016/0043-1648(73)90019-7 10.1016/j.ijmachtools.2005.11.014 10.1016/j.jmatprotec.2008.01.050 10.1016/S0924-0136(01)00959-1 10.1016/S0924-0136(01)01063-9 10.1016/j.jmatprotec.2008.07.023 10.1016/S0890-6955(01)00163-8 10.1016/S0360-8352(96)00235-5 10.1016/0890-6955(92)90025-C 10.1016/S0924-0136(96)02818-X 10.1016/j.jmatprotec.2007.12.018 10.1016/S0924-0136(98)00079-X 10.1016/S0924-0136(99)00365-9 10.1016/S0924-0136(99)00111-9 10.1016/j.rcim.2007.11.004 |
| ContentType | Journal Article |
| Copyright | The Korean Society of Mechanical Engineers and Springer-Verlag Berlin Heidelberg 2015 |
| Copyright_xml | – notice: The Korean Society of Mechanical Engineers and Springer-Verlag Berlin Heidelberg 2015 |
| DBID | AAYXX CITATION 7TB 8FD 8FE 8FG ABJCF AFKRA BENPR BGLVJ CCPQU DWQXO FR3 HCIFZ L6V M7S PHGZM PHGZT PKEHL PQEST PQGLB PQQKQ PQUKI PRINS PTHSS S0W ACYCR |
| DOI | 10.1007/s12206-015-0742-5 |
| DatabaseName | CrossRef Mechanical & Transportation Engineering Abstracts Technology Research Database ProQuest SciTech Collection ProQuest Technology Collection ProQuest Materials Science & Engineering ProQuest Central UK/Ireland ProQuest Central Technology Collection ProQuest One Community College ProQuest Central Korea Engineering Research Database SciTech Premium Collection ProQuest Engineering Collection Engineering Database ProQuest Central Premium ProQuest One Academic ProQuest One Academic Middle East (New) ProQuest One Academic Eastern Edition (DO NOT USE) ProQuest One Applied & Life Sciences ProQuest One Academic ProQuest One Academic UKI Edition ProQuest Central China Engineering collection DELNET Engineering & Technology Collection Korean Citation Index |
| DatabaseTitle | CrossRef Engineering Database Technology Collection Technology Research Database ProQuest One Academic Middle East (New) Mechanical & Transportation Engineering Abstracts ProQuest One Academic Eastern Edition SciTech Premium Collection ProQuest One Community College ProQuest Technology Collection ProQuest SciTech Collection ProQuest Central China ProQuest Central ProQuest One Applied & Life Sciences ProQuest Engineering Collection ProQuest One Academic UKI Edition ProQuest Central Korea ProQuest DELNET Engineering and Technology Collection Materials Science & Engineering Collection Engineering Research Database ProQuest One Academic ProQuest Central (New) Engineering Collection ProQuest One Academic (New) |
| DatabaseTitleList | Engineering Database Technology Research Database |
| Database_xml | – sequence: 1 dbid: 8FG name: ProQuest Technology Collection url: https://search.proquest.com/technologycollection1 sourceTypes: Aggregation Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1976-3824 |
| EndPage | 3445 |
| ExternalDocumentID | oai_kci_go_kr_ARTI_1057764 3771971501 10_1007_s12206_015_0742_5 |
| Genre | Feature |
| GroupedDBID | -5B -5G -BR -EM -Y2 -~C .86 .UV .VR 06D 0R~ 0VY 1N0 2.D 203 29L 29~ 2J2 2JN 2JY 2KG 2KM 2LR 2VQ 2~H 30V 4.4 406 408 40D 40E 5GY 5VS 6NX 8FE 8FG 8UJ 95- 95. 95~ 96X 9ZL AAAVM AABHQ AACDK AAHNG AAIAL AAJBT AAJKR AANZL AARHV AARTL AASML AATNV AATVU AAUYE AAWCG AAYIU AAYQN AAYTO AAYZH ABAKF ABDZT ABECU ABFTD ABFTV ABHQN ABJCF ABJNI ABJOX ABKCH ABMNI ABMQK ABNWP ABQBU ABQSL ABSXP ABTEG ABTHY ABTKH ABTMW ABWNU ABXPI ACAOD ACBXY ACDTI ACGFS ACHSB ACHXU ACIWK ACKNC ACMDZ ACMLO ACOKC ACOMO ACPIV ACSNA ACZOJ ADHIR ADINQ ADKNI ADKPE ADMLS ADRFC ADTPH ADURQ ADYFF ADZKW AEBTG AEFQL AEGAL AEGNC AEJHL AEJRE AEKMD AEMSY AENEX AEOHA AEPYU AESKC AETLH AEVLU AEXYK AFBBN AFGCZ AFKRA AFLOW AFQWF AFWTZ AFZKB AGAYW AGDGC AGJBK AGMZJ AGQEE AGQMX AGRTI AGWIL AGWZB AGYKE AHAVH AHBYD AHKAY AHSBF AHYZX AIAKS AIGIU AIIXL AILAN AITGF AJBLW AJRNO ALMA_UNASSIGNED_HOLDINGS ALWAN AMKLP AMXSW AMYLF AOCGG ARCEE ARMRJ ASPBG AVWKF AXYYD AYJHY AZFZN B-. BA0 BDATZ BENPR BGLVJ CAG CCPQU COF CS3 CSCUP DBRKI DDRTE DNIVK DPUIP EBLON EBS EIOEI EJD ESBYG FEDTE FERAY FFXSO FIGPU FINBP FNLPD FRRFC FSGXE FWDCC GGCAI GGRSB GJIRD GNWQR GQ6 GQ7 GW5 H13 HCIFZ HF~ HG6 HMJXF HRMNR HVGLF HZ~ I-F IJ- IKXTQ IWAJR IXC IXD I~X I~Z J-C J0Z JBSCW JZLTJ KOV KVFHK L6V LLZTM M7S MA- MK~ ML~ MZR NDZJH NF0 NPVJJ NQJWS O9- P9P PF0 PT4 PTHSS Q2X QOS R89 R9I RHV ROL RPX RSV S0W S16 S1Z S26 S27 S28 S3B SAP SCLPG SDH SEG SHX SISQX SJYHP SNE SNPRN SNX SOHCF SOJ SPISZ SRMVM SSLCW STPWE SZN T13 T16 TDB TSG TSV TUC TUS U2A UG4 UOJIU UTJUX UZXMN VC2 VFIZW W48 WK8 YLTOR Z45 Z5O Z7R Z7S Z7V Z7W Z7X Z7Y Z7Z Z81 Z83 Z85 Z86 Z88 Z8M Z8R Z8T Z8W ZMTXR ZZE ~A9 AAPKM AAYXX ABDBE ABFSG ACSTC ADHKG AEZWR AFDZB AFHIU AFOHR AGQPQ AHPBZ AHWEU AIXLP ATHPR CITATION PHGZM PHGZT 7TB 8FD ABRTQ DWQXO FR3 PKEHL PQEST PQGLB PQQKQ PQUKI PRINS PUEGO ACYCR |
| ID | FETCH-LOGICAL-c383t-b569987d8ff52bddab6715d2fb846b6511ba95a0d3938e816695656e365dfbda3 |
| IEDL.DBID | 8FG |
| ISSN | 1738-494X |
| IngestDate | Sun Mar 09 07:52:54 EDT 2025 Thu Sep 04 16:32:27 EDT 2025 Fri Jul 25 11:18:06 EDT 2025 Thu Apr 24 22:56:01 EDT 2025 Tue Jul 01 02:20:22 EDT 2025 Fri Feb 21 02:31:23 EST 2025 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Issue | 8 |
| Keywords | Spindle speed Interacted effect Cutting condition Surface roughness |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c383t-b569987d8ff52bddab6715d2fb846b6511ba95a0d3938e816695656e365dfbda3 |
| Notes | SourceType-Scholarly Journals-1 ObjectType-Feature-1 content type line 14 ObjectType-Article-1 ObjectType-Feature-2 content type line 23 G704-000058.2015.29.8.040 |
| PQID | 1702238458 |
| PQPubID | 326249 |
| PageCount | 9 |
| ParticipantIDs | nrf_kci_oai_kci_go_kr_ARTI_1057764 proquest_miscellaneous_1730045023 proquest_journals_1702238458 crossref_primary_10_1007_s12206_015_0742_5 crossref_citationtrail_10_1007_s12206_015_0742_5 springer_journals_10_1007_s12206_015_0742_5 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | 2015-08-01 |
| PublicationDateYYYYMMDD | 2015-08-01 |
| PublicationDate_xml | – month: 08 year: 2015 text: 2015-08-01 day: 01 |
| PublicationDecade | 2010 |
| PublicationPlace | Seoul |
| PublicationPlace_xml | – name: Seoul – name: Heidelberg |
| PublicationTitle | Journal of mechanical science and technology |
| PublicationTitleAbbrev | J Mech Sci Technol |
| PublicationYear | 2015 |
| Publisher | Korean Society of Mechanical Engineers Springer Nature B.V 대한기계학회 |
| Publisher_xml | – name: Korean Society of Mechanical Engineers – name: Springer Nature B.V – name: 대한기계학회 |
| References | Genga, Abrao (CR5) 2003; 143–144 Liu, Melkote (CR18) 2006; 46 Nalbant, Gokkaya, Toktas, Sur (CR13) 2009; 25 Yang, Tarng (CR1) 1998; 84 Thomas, Beauchamp, Youssef, Masounave (CR9) 1996; 31 Ozel, Karpat (CR11) 2005; 45 Thiele, Melkote (CR8) 1999; 94 Kopac, Bahor, Sokovic (CR2) 2002; 42 Thomas, Beauchamp (CR10) 2003; 43 Jawahir, Qureshi, Aresecularatne (CR14) 1992; 32 Karayel (CR12) 2009; 209 Davim (CR3) 2001; 116 Darwish (CR6) 2000; 97 Cakir, Ensarioglu, Demirayak (CR16) 2009; 209 Petropoulos (CR17) 1973; 23 Lalwani, Mehta, Jain (CR4) 2008; 206 Choudhury, El-Baradie (CR7) 1997; 67 Abouelatta, Madl (CR15) 2001; 118 S. M. Darwish (742_CR6) 2000; 97 G. C. Genga (742_CR5) 2003; 143–144 M. Thomas (742_CR9) 1996; 31 M. Nalbant (742_CR13) 2009; 25 O. B. Abouelatta (742_CR15) 2001; 118 K. Liu (742_CR18) 2006; 46 M. C. Cakir (742_CR16) 2009; 209 D. I. Lalwani (742_CR4) 2008; 206 I. A. Choudhury (742_CR7) 1997; 67 W. H. Yang (742_CR1) 1998; 84 I. S. Jawahir (742_CR14) 1992; 32 P. G. Petropoulos (742_CR17) 1973; 23 J. Kopac (742_CR2) 2002; 42 T. Ozel (742_CR11) 2005; 45 J. P. Davim (742_CR3) 2001; 116 J. D. Thiele (742_CR8) 1999; 94 M. Thomas (742_CR10) 2003; 43 D. Karayel (742_CR12) 2009; 209 |
| References_xml | – volume: 43 start-page: 1093 year: 2003 end-page: 1106 ident: CR10 article-title: Statistical investigation of modal parameters of cutting tools in dry turning publication-title: Int. J. Mach. Tools Manuf. doi: 10.1016/S0890-6955(03)00131-7 – volume: 45 start-page: 467 year: 2005 end-page: 479 ident: CR11 article-title: Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks publication-title: Int. J. Mach. Tools & Manuf. doi: 10.1016/j.ijmachtools.2004.09.007 – volume: 23 start-page: 299 year: 1973 end-page: 310 ident: CR17 article-title: The effect of feed rate and of tool nose radius on the roughness of oblique finish turned surfaces publication-title: Wear doi: 10.1016/0043-1648(73)90019-7 – volume: 46 start-page: 1778 year: 2006 end-page: 1785 ident: CR18 article-title: Effect of plastic side flow on surface roughness in micro-turning process publication-title: Int. J. Mach. Tools Manuf. doi: 10.1016/j.ijmachtools.2005.11.014 – volume: 209 start-page: 102 year: 2009 end-page: 109 ident: CR16 article-title: Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material publication-title: J. Mat. Proc. Tech. doi: 10.1016/j.jmatprotec.2008.01.050 – volume: 118 start-page: 269 year: 2001 end-page: 277 ident: CR15 article-title: Surface roughness prediction based on cutting parameters and tool vibrations in turning operations publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(01)00959-1 – volume: 116 start-page: 305 year: 2001 end-page: 308 ident: CR3 article-title: A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(01)01063-9 – volume: 209 start-page: 3125 year: 2009 end-page: 3137 ident: CR12 article-title: Prediction and control of surface roughness in CNC lathe using artificial neural network publication-title: J. Mat. Proc. Tech. doi: 10.1016/j.jmatprotec.2008.07.023 – volume: 42 start-page: 707 year: 2002 end-page: 716 ident: CR2 article-title: Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel workpieces publication-title: Int. J. Mach. Tools & Manuf. doi: 10.1016/S0890-6955(01)00163-8 – volume: 31 start-page: 637 issue: 3–4 year: 1996 end-page: 644 ident: CR9 article-title: Effect of tool vibration on surface roughness during lathe dry turning process publication-title: Computers & Industrial Engineering doi: 10.1016/S0360-8352(96)00235-5 – volume: 32 start-page: 709 issue: 5 year: 1992 end-page: 723 ident: CR14 article-title: On the interrelationships of some machinability parameters in finish turning with cermet chip forming tool inserts publication-title: Int. J. Mach. Tools Manuf. doi: 10.1016/0890-6955(92)90025-C – volume: 67 start-page: 55 year: 1997 end-page: 61 ident: CR7 article-title: Surface roughness prediction in the turning of high-strength steel by factorial design of experiments publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(96)02818-X – volume: 206 start-page: 167 year: 2008 end-page: 179 ident: CR4 article-title: Experimental investigation of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel publication-title: J. Mat. Proc. Tech. doi: 10.1016/j.jmatprotec.2007.12.018 – volume: 84 start-page: 122 year: 1998 end-page: 129 ident: CR1 article-title: Design optimization of cutting parameters for turning operations based on the Taguchi method publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(98)00079-X – volume: 97 start-page: 10 year: 2000 end-page: 18 ident: CR6 article-title: The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(99)00365-9 – volume: 143–144 start-page: 237 year: 2003 end-page: 241 ident: CR5 article-title: Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools publication-title: J. Mat. Proc. Tech. – volume: 94 start-page: 216 year: 1999 end-page: 226 ident: CR8 article-title: Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(99)00111-9 – volume: 25 start-page: 211 year: 2009 end-page: 223 ident: CR13 article-title: The experimental investigation of the effects of uncoated, PVD-and CVD-coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using artificial neural networks publication-title: Robotics and Computer-Integrated Manufacturing doi: 10.1016/j.rcim.2007.11.004 – volume: 25 start-page: 211 year: 2009 ident: 742_CR13 publication-title: Robotics and Computer-Integrated Manufacturing doi: 10.1016/j.rcim.2007.11.004 – volume: 43 start-page: 1093 year: 2003 ident: 742_CR10 publication-title: Int. J. Mach. Tools Manuf. doi: 10.1016/S0890-6955(03)00131-7 – volume: 206 start-page: 167 year: 2008 ident: 742_CR4 publication-title: J. Mat. Proc. Tech. doi: 10.1016/j.jmatprotec.2007.12.018 – volume: 32 start-page: 709 issue: 5 year: 1992 ident: 742_CR14 publication-title: Int. J. Mach. Tools Manuf. doi: 10.1016/0890-6955(92)90025-C – volume: 118 start-page: 269 year: 2001 ident: 742_CR15 publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(01)00959-1 – volume: 209 start-page: 102 year: 2009 ident: 742_CR16 publication-title: J. Mat. Proc. Tech. doi: 10.1016/j.jmatprotec.2008.01.050 – volume: 94 start-page: 216 year: 1999 ident: 742_CR8 publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(99)00111-9 – volume: 23 start-page: 299 year: 1973 ident: 742_CR17 publication-title: Wear doi: 10.1016/0043-1648(73)90019-7 – volume: 42 start-page: 707 year: 2002 ident: 742_CR2 publication-title: Int. J. Mach. Tools & Manuf. doi: 10.1016/S0890-6955(01)00163-8 – volume: 209 start-page: 3125 year: 2009 ident: 742_CR12 publication-title: J. Mat. Proc. Tech. doi: 10.1016/j.jmatprotec.2008.07.023 – volume: 84 start-page: 122 year: 1998 ident: 742_CR1 publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(98)00079-X – volume: 67 start-page: 55 year: 1997 ident: 742_CR7 publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(96)02818-X – volume: 116 start-page: 305 year: 2001 ident: 742_CR3 publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(01)01063-9 – volume: 97 start-page: 10 year: 2000 ident: 742_CR6 publication-title: J. Mat. Proc. Tech. doi: 10.1016/S0924-0136(99)00365-9 – volume: 46 start-page: 1778 year: 2006 ident: 742_CR18 publication-title: Int. J. Mach. Tools Manuf. doi: 10.1016/j.ijmachtools.2005.11.014 – volume: 45 start-page: 467 year: 2005 ident: 742_CR11 publication-title: Int. J. Mach. Tools & Manuf. doi: 10.1016/j.ijmachtools.2004.09.007 – volume: 31 start-page: 637 issue: 3–4 year: 1996 ident: 742_CR9 publication-title: Computers & Industrial Engineering doi: 10.1016/S0360-8352(96)00235-5 – volume: 143–144 start-page: 237 year: 2003 ident: 742_CR5 publication-title: J. Mat. Proc. Tech. |
| SSID | ssj0062411 |
| Score | 2.0152607 |
| Snippet | Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on the surface roughness has yet... Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on thesurface roughness has yet... |
| SourceID | nrf proquest crossref springer |
| SourceType | Open Website Aggregation Database Enrichment Source Index Database Publisher |
| StartPage | 3437 |
| SubjectTerms | Control Cutting Cutting parameters Documents Dynamical Systems Engineering Industrial and Production Engineering Inserts Mechanical Engineering Optimization Surface roughness Taguchi methods Turning Vibration 기계공학 |
| SummonAdditionalLinks | – databaseName: SpringerLINK - Czech Republic Consortium dbid: AGYKE link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1Lb9QwEB7R7aUceBYRKMhFnKhSbRLbiY-rqqULKhdasT1ZdmyjaiGLssmFX89MHn2pReophzgjx57xfON5AXwslffWlJR-hpYO5ybEhRMKgZxKrAxTyz3dd5x8k8dn_MtCLIY87vUY7T66JLuT-irZLU0761fEZM_FYgM2RVKoYgKbs8_nXw_HA1iiUursrBxlmSu-GJ2ZdxG5oY42qjrcQJq3nKOdzjl6CqfjbPtQk-V-29j98u-tQo4P_J1n8GTAoGzWM81zeOSrF_D4WmXCl1Aj-7A-1oOtAivbLjyaUaHw3xRAs2YIdhmCRxYobr5h67YOpvSs6_pDxyfrEyC7MajW6PqFKM3m3-cMjTPB6AaYGfbjgF1UFBKwDWdHh6cHx_HQniEu0axtYisk2mq5K0IQqXXOWJknwqXBIqaxEpGcNUqYqctUVnjyTypCjz6TwgXrTPYKJtWq8q-BIWZ01hovp5ngCVJIM-6UL6xx1nmRRjAdd0mXQ-1yaqHxS19VXabl1LicmpZTiwg-XX7ypy_c8b_BH3Dr9bK80FRum54_V3pZazQq5ppaIeeSR7AzcoYeBH2tkxxBUFZwUUSwe_kaRZT8Lqbyq5bGUFkzgegogr2RGa6RuG9Wbx40-i1spR03UXDiDkyauvXvEDA19v0gIP8AkHIJ0A priority: 102 providerName: Springer Nature |
| Title | The effect of cutting parameters for the finest surface roughness during the turning of AISI 1045 with a WC insert |
| URI | https://link.springer.com/article/10.1007/s12206-015-0742-5 https://www.proquest.com/docview/1702238458 https://www.proquest.com/docview/1730045023 https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002016550 |
| Volume | 29 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| ispartofPNX | Journal of Mechanical Science and Technology, 2015, 29(8), , pp.3437-3445 |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwfV3dT9swED8NeNkeENuYFgbIQ3saimgS20mepoJaKNPQtK2ie7Ls2J4QWwJp-__vzk34mDSeLCWOE-XOd7_78B3Ah6p0zuiKjp-hpcO59nFhRYlArkyM9APDHfk7vlzIsyk_n4lZ53Cbd2mVvUwMgto2FfnIj5IctU1WcFF8urmNqWsURVe7FhprsJGgpiE-L8anvSSWqJ2CwZXjpuYln_VRzXB0Lk2DLS1isg5j8UgvrdWtfwQ5_4mSBuUz3oLNDjWy4YrML-GZq1_Biwe1BF9DiwRnq-wM1nhWLUNCM6PS3n8o5WXOEJ4yhHvMU6b7gs2XrdeVY6FPDwk8tjqyGOagIiKHCa00nHyfMDSnBCOfLdPs8oRd1RTE34bpePTj5CzuGirEFRqii9gIidZVbgvvRWqs1UbmibCpN4hCjETsZXQp9MBmZVY4iiiWhPdcJoX1xursDazXTe3eAkOUZ43RTg4ywRNcIc24LV1htDXWiTSCQf87VdVVG6emF7_VfZ1kooBCCiiigBIRfLx75GZVauOpyQdII3VdXSkqkE3jr0ZdtwrNgImi5sW55BHs9iRU3dacq3tGiuD93W3cVBQp0bVrljSHCpEJxDMRHPakf7DE_75q5-kXvoPnaeA4yh_chfVFu3R7iGkWZj8w7j5sDE9_fh7heDy6-PoNr07T4V9i5fSR |
| linkProvider | ProQuest |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1Lb9QwEB612wNwQDxFoAWD4AKKupvYeRwqVEqrDW1XCFqxN2PHNqoKScnuquqf4jcy4yR9INFbT3uI46wyk5nv87wAXpe5tVqVVH6GTIdz5cLMiByBXD7SiRtqbum8Y3-SjA_5p6mYLsGfvhaG0ip7m-gNtalLOiNfH6XobeKMi-z9ye-QpkZRdLUfodGqxa49O0XKNtsoPqJ830TRzvbB1jjspgqEJbKxeahFghQjNZlzItLGKJ2kI2Eip9EV6wQBiFa5UEMT53FmKayWE-ixcSKM00bFuO8yrHCqaB3Ayoftyecvve1P0B96ipeiGeE5n_ZxVF-sF0WevYuQ-GgornjC5apxV0DuP3FZ7-527sHdDqeyzVax7sOSrR7AnUvdCx9CgyrG2nwQVjtWLnwKNaNm4r8oyWbGEBAzBJjMUW79nM0WjVOlZX4yEJlY1hZJ-jXo-uiIhnbaLL4WDAmcYHRKzBT7tsWOKkobeASHN_KyH8Ogqiv7BBjiSqO1sskwFnyEO0QxN7nNtDLaWBEFMOxfpyy7_uY0ZuOnvOjMTBKQKAFJEpAigLfnt5y0zT2uW_wKZSSPyyNJLbnp90ctjxuJxKOQNC45TXgAq70IZWcMZvJCdQN4eX4ZP2OKzajK1gtaQ63PBCKoAN71or-0xf_-1dPrH_gCbo0P9vfkXjHZfQa3I699lL24CoN5s7BriKjm-nmnxgy-3_SX8xdjFC7o |
| linkToPdf | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1Lb9QwEB61RUJwqHiK0BYMggso6m5iO8mhQlXL0lCokKBib64d26gqJCW7K8Rf49cx4yR9INFbTznEcaLMeOb7POMZgBdV4ZzRFR0_Q6bDufZxbkWBQK4YG-lHhjva7_h4IPcO-fupmC7Bn-EsDKVVDjYxGGrbVLRHvjnO0NukORf5pu_TIj7tTt6c_oypgxRFWod2Gp2K7Lvfv5C-zbbKXZT1yySZvP2ysxf3HQbiCpnZPDZCIt3IbO69SIy12shsLGziDbplIxGMGF0IPbJpkeaOQmwFASCXSmG9sTrFeZfhRpZmBRG_fPJu8AISPWMgexkaFF7w6RBRDcf2kiTweBETM43FJZ-4XLf-Etz9J0IbHN_kDqz2iJVtdyp2F5ZcfQ9uX6hjeB9aVDbWZYawxrNqEZKpGZUV_0HpNjOG0Jgh1GSesuznbLZova4cCz2CyNiy7rhkGINOkDZraKbt8nPJkMoJRvvFTLOvO-y4pgSCB3B4Lb_6IazUTe0eAUOEaY3RTo5Swcc4Q5JyW7jcaGusE0kEo-F3qqqvdE4NN76r8xrNJAGFElAkASUieHX2yGlX5uOqwc9RRuqkOlZUnJuu3xp10iqkIKWixsmZ5BGsDyJUvVmYqXMljuDZ2W1c0BSl0bVrFjSGiqAJxFIRvB5Ef2GK_33V46tf-BRu4npRH8qD_TW4lQTlozTGdViZtwu3gdBqbp4EHWZwdN2L5i9nyDG4 |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=The+effect+of+cutting+parameters+for+the+finest+surface+roughness+during+the+turning+of+AISI+1045+with+a+WC+insert&rft.jtitle=Journal+of+mechanical+science+and+technology&rft.au=Kim%2C+Yong-sun&rft.au=Kwon%2C+Won+Tae&rft.date=2015-08-01&rft.pub=Springer+Nature+B.V&rft.issn=1738-494X&rft.eissn=1976-3824&rft.volume=29&rft.issue=8&rft.spage=3437&rft_id=info:doi/10.1007%2Fs12206-015-0742-5&rft.externalDBID=HAS_PDF_LINK&rft.externalDocID=3771971501 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1738-494X&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1738-494X&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1738-494X&client=summon |