Making microporous nanometre-scale fibrous PLA aerogels with clean and reliable supercritical CO2 based approaches

• Published in: Microporous and mesoporous materials Vol. 184; pp. 162 - 168
• Main Authors: Salerno, Aurelio, Domingo, Concepción
• Format: Journal Article
• Language: English
• Published: San Diego, CA Elsevier Inc 2014; Elsevier
• Subjects: Aerogel; Chemistry; Colloidal state and disperse state; Exact sciences and technology; General and physical chemistry; Nanofibre; Polylactic acid; Pore structure; Porous materials; Supercritical CO2; Aerogel; Pore structure; Supercritical CO2; Polylactic acid; Nanofibre; Lactic acid polymer; Microporosity; Acids; Carbon dioxide; Supercritical state; Porous material; Supercritical CO
• ISSN: 1387-1811; 1873-3093
• DOI: 10.1016/j.micromeso.2013.10.019

•Microporous nanoscale fibrous PLA aerogels are fabricated.•A clean approach based on phase separation and supercritical CO2 drying is proposed.•PLA aerogels have porosity and surface area up to 95% and 95m2/g.•The fabrication of multi-scaled porous scaffolds for tissue engineering is discussed. Polylactic acid (PLA) aerogels, with a multiscale structure consisting of nanometre-scale fibres and interconnected micropores, were here fabricated by a novel thermal induced phase separation (TIPS) approach. The developed process is based on a biocompatible route combining ethyl lactate (EL) as a non-toxic solvent for PLA and supercritical CO2 (scCO2) as a clean drying agent. First, PLA was dissolved in EL to prepare homogeneous solutions with a polymer concentration ranging from 3 to 5.5wt%. Subsequently, TIPS was generated by the controlled decrease of the temperature down to a temperature lower than the solution gelation point. Finally, solvent exchange, alcogel formation and scCO2 drying allowed the manufacture of the desired nanometre-scale fibrous PLA aerogels. In particular, PLA aerogels with homogeneous morphology and constituted by an overall porosity in the range of 90–95% and a specific surface area in the range of 70–95m2/g were manufactured by modulating polymer concentration in the starting EL solution, gelation temperature and EL extraction conditions. The obtained aerogels possessed a bimodal structure of fibres with a mean length of 100–200nm coupled with nanopores of a mean diameter down to 2nm. Finally, the combination of TIPS with gas foaming and porogen leaching techniques was explored as a suitable strategy to obtain multifunctional micro- and nano-sized fibrous PLA materials, suitable of providing biomimetic three-dimensional platforms for tissue engineering scaffolds.