Effect of homogenization time on quench sensitivity of 7085 aluminum alloy
The effect of homogenization time on quench sensitivity of a cast 7085 aluminum alloy was investigated by means of end-quenching test, optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that with the increase of homogenization tim...
Saved in:
Published in | Transactions of Nonferrous Metals Society of China Vol. 24; no. 7; pp. 2275 - 2281 |
---|---|
Main Authors | , , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier Ltd
01.07.2014
|
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | The effect of homogenization time on quench sensitivity of a cast 7085 aluminum alloy was investigated by means of end-quenching test, optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that with the increase of homogenization time from 48 h to 384 h, quench sensitivity increased slightly as the largest difference in the hardness was increased from 5.2% to 6.9% in the end-quenched and aged specimens. Prolonging homogenization had little effect on the grain structure, but improved the dissolution of soluble T phase and resulted in larger Al3Zr dispersoids with a low number density. Some small quench-induced η phase particles on Al3Zr dispersoids were observed inside grains during slow quenching, which decreased hardness after subsequent aging. The change in the character of Al3Zr dispersoids exerted slight influence on quench sensitivity. |
---|---|
AbstractList | The effect of homogenization time on quench sensitivity of a cast 7085 aluminum alloy was investigated by means of end-quenching test, optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that with the increase of homogenization time from 48 h to 384 h, quench sensitivity increased slightly as the largest difference in the hardness was increased from 5.2% to 6.9% in the end-quenched and aged specimens. Prolonging homogenization had little effect on the grain structure, but improved the dissolution of soluble T phase and resulted in larger Al3Zr dispersoids with a low number density. Some small quench-induced η phase particles on Al3Zr dispersoids were observed inside grains during slow quenching, which decreased hardness after subsequent aging. The change in the character of Al3Zr dispersoids exerted slight influence on quench sensitivity. |
Author | DENG, Yun-lai ZHANG, Xin-ming LIU, Sheng-dan ZHENG, Yu-lin LI, Cheng-bo |
Author_xml | – sequence: 1 givenname: Yu-lin surname: ZHENG fullname: ZHENG, Yu-lin organization: School of Materials Science and Engineering, Central South University, Changsha 410083, China – sequence: 2 givenname: Cheng-bo surname: LI fullname: LI, Cheng-bo organization: School of Materials Science and Engineering, Central South University, Changsha 410083, China – sequence: 3 givenname: Sheng-dan surname: LIU fullname: LIU, Sheng-dan email: csuliusd@163.com, lsd_csu@csu.edu.cn organization: School of Materials Science and Engineering, Central South University, Changsha 410083, China – sequence: 4 givenname: Yun-lai surname: DENG fullname: DENG, Yun-lai organization: School of Materials Science and Engineering, Central South University, Changsha 410083, China – sequence: 5 givenname: Xin-ming surname: ZHANG fullname: ZHANG, Xin-ming organization: School of Materials Science and Engineering, Central South University, Changsha 410083, China |
BookMark | eNqFkE1PwzAMhnMYEtvgJyD1CIeC3Xy0PSE0jQGaxAE4R1GWsKA2gaadVH492Ya4cvFrW_Yr-5mRiQ_eEHKBcI2A4uYFAWguaCEukV0JShnLxYRM_9qnZBbjBwBjQuCUPC2tNbrPgs22oQ3vxrtv1bvgs961Jkv6NRivt1k0Prre7Vw_7odLqHimmqF1fmhT0oTxjJxY1URz_qtz8na_fF085Ovn1ePibp1rWvI-r7FEpmumgYmqLAQFqpSBmhfAuSo4pxpAWQ02FbWyCKJmFa0KqxjWFumc8KOv7kKMnbHys3Ot6kaJIPcQ5AGC3H8rkckDhBTn5Pa4Z9JxO2c6GbVLv5mN6xICuQnuH4cfNlFmTg |
CitedBy_id | crossref_primary_10_1016_j_matchar_2019_05_018 crossref_primary_10_1007_s10853_022_07125_8 crossref_primary_10_1016_j_msea_2021_142482 crossref_primary_10_1016_j_msea_2016_03_027 crossref_primary_10_1007_s11837_019_03421_y crossref_primary_10_1007_s11661_020_05759_4 crossref_primary_10_1016_j_jallcom_2021_161450 crossref_primary_10_1016_S1875_5372_17_30124_8 crossref_primary_10_1016_S1003_6326_16_64408_4 crossref_primary_10_1016_j_matchar_2020_110861 crossref_primary_10_1007_s11015_024_01657_x crossref_primary_10_1007_s12613_019_1729_5 crossref_primary_10_1016_j_msea_2018_05_092 crossref_primary_10_1016_S1003_6326_20_65476_0 crossref_primary_10_1016_j_matchar_2021_111156 crossref_primary_10_1016_j_jmrt_2024_06_111 crossref_primary_10_1080_02670836_2019_1578919 crossref_primary_10_1016_j_msea_2023_144674 crossref_primary_10_1016_S1003_6326_15_63683_4 crossref_primary_10_1016_S1003_6326_22_65856_4 crossref_primary_10_1016_S1003_6326_16_64254_1 crossref_primary_10_3139_120_111242 crossref_primary_10_1016_j_jmrt_2022_05_059 crossref_primary_10_1016_j_jallcom_2016_07_089 crossref_primary_10_1016_j_jmrt_2020_12_068 crossref_primary_10_2320_matertrans_MT_M2019279 crossref_primary_10_3390_met11091483 crossref_primary_10_3390_ma17010193 crossref_primary_10_1016_j_actamat_2023_119562 |
Cites_doi | 10.1016/S1003-6326(09)60088-1 10.1016/S0921-5093(03)00653-1 10.1016/S1471-5317(01)00007-4 10.1016/S1003-6326(11)61170-9 10.1016/S1359-6454(02)00063-0 10.3724/SP.J.1037.2011.00517 10.1016/j.msea.2004.05.006 10.1007/s12540-012-4016-9 10.1016/j.jallcom.2010.07.124 10.1016/j.msea.2010.07.033 10.1016/S0924-0136(01)00927-X 10.1016/j.jallcom.2011.01.147 10.1016/S1003-6326(11)61138-2 10.1016/S0924-0136(03)00597-1 10.1016/S1003-6326(11)61313-7 10.1016/j.msea.2004.09.013 |
ContentType | Journal Article |
Copyright | 2014 The Nonferrous Metals Society of China |
Copyright_xml | – notice: 2014 The Nonferrous Metals Society of China |
DBID | AAYXX CITATION |
DOI | 10.1016/S1003-6326(14)63344-6 |
DatabaseName | CrossRef |
DatabaseTitle | CrossRef |
DatabaseTitleList | |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EndPage | 2281 |
ExternalDocumentID | 10_1016_S1003_6326_14_63344_6 S1003632614633446 |
GrantInformation_xml | – fundername: National Basic Research Program of China grantid: (2012CB619500) |
GroupedDBID | --K --M -02 -0B -SB -S~ .~1 0R~ 123 188 1B1 1~. 1~5 2B. 2C0 4.4 457 4G. 5VR 5VS 5XA 5XC 5XL 7-5 71M 8P~ 8RM 92H 92I 92M 92R 93N 9D9 9DB AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAXUO ABFNM ABMAC ABXDB ABXRA ABYKQ ACDAQ ACGFS ACNNM ACRLP ADBBV ADEZE ADMUD AEBSH AEKER AENEX AEZYN AFKWA AFRZQ AFTJW AFUIB AGHFR AGUBO AGYEJ AIEXJ AIKHN AITUG AJBFU AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BKOJK BLXMC CAJEB CAJUS CCEZO CDRFL CHBEP CS3 CW9 DU5 EBS EFJIC EFLBG EJD EO9 EP2 EP3 FA0 FDB FIRID FNPLU FYGXN GBLVA HZ~ J1W JUIAU KOM M41 MAGPM MO0 N9A O-L O9- OAUVE OZT P-8 P-9 PC. Q-- Q38 R-B ROL RT2 S.. SDC SDF SDG SES SPC SSM SSZ T5K T8R TCJ TGT U1F U1G U5B U5L UGNYK UZ4 ~02 ~G- 0SF AAXDM AAXKI AAYXX ADVLN AKRWK CITATION |
ID | FETCH-LOGICAL-c375t-91714c94c0468726303aae0952055a2553c00afc0fa259af106948382fa419f13 |
IEDL.DBID | AIKHN |
ISSN | 1003-6326 |
IngestDate | Thu Sep 12 19:39:01 EDT 2024 Fri Feb 23 02:33:29 EST 2024 |
IsPeerReviewed | true |
IsScholarly | true |
Issue | 7 |
Keywords | Al3Zr dispersoids homogenization quench sensitivity end quenching equilibrium η phase 7085 aluminum alloy |
Language | English |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c375t-91714c94c0468726303aae0952055a2553c00afc0fa259af106948382fa419f13 |
PageCount | 7 |
ParticipantIDs | crossref_primary_10_1016_S1003_6326_14_63344_6 elsevier_sciencedirect_doi_10_1016_S1003_6326_14_63344_6 |
PublicationCentury | 2000 |
PublicationDate | 2014-07-01 |
PublicationDateYYYYMMDD | 2014-07-01 |
PublicationDate_xml | – month: 07 year: 2014 text: 2014-07-01 day: 01 |
PublicationDecade | 2010 |
PublicationTitle | Transactions of Nonferrous Metals Society of China |
PublicationYear | 2014 |
Publisher | Elsevier Ltd |
Publisher_xml | – name: Elsevier Ltd |
References | CHAKRABARTI, LIU, SAWTELL, VENEMA (bib2) 2004; 28 LIU, LIU, ZHANG, ZHANG (bib3) 2010; 507 LIM, YUN, NAM (bib6) 2004; 371 ZHANG, LIU, LIU, ZHOU (bib9) 2011; 528 LIU, ZHANG, LIU, ZHOU (bib16) 2010; 20 LIU, LI, YUAN, ZHANG (bib18) 2012; 18 GODARD, ARCHAMBAULT, AEBY-GAUTIER (bib10) 2002; 50 KNIPLING (bib20) 2006 LIU, ZHANG, LIU, DENG, ZHANG (bib11) 2010; 20 LI, XIONG, ZHANG, LI, ZHU (bib7) 2012; 22 ROBSON (bib15) 2004; 382 LU (bib13) 2012 ROBINSON, CUDD, TANNER (bib5) 2001; 119 DENG, WANG, ZHANG (bib22) 2011; 509 LIU (bib12) 2011 TANG, CHEN, ZHANG (bib8) 2012; 22 DONS (bib14) 2001; 1 CHEN, CHEN, PENG, LIANG, CHEN (bib4) 2012; 22 BOSELLI J, CHAKRABARTI D J, SHUEY R T. Aerospace applications: Metallurgical insights into the improved performance of aluminum alloy 7085 thick products [C]//HIRSCH J, SKROTZKI B, GOTTSTEIN G. Aluminium alloys: Their Physical and Mechanical Properties. Proceedings of the 11 International Conference on Aluminium alloys. Aachen, Germany, 2008: 202–208. MONDAL, MUKHOPADHYAY (bib19) 2005; 391 LIU, LI, DENG, ZHANG (bib17) 2012; 48 CHEN, LIU, ZHANG (bib21) 2003; 142 10.1016/S1003-6326(14)63344-6_bib1 LU (10.1016/S1003-6326(14)63344-6_bib13) 2012 MONDAL (10.1016/S1003-6326(14)63344-6_bib19) 2005; 391 ZHANG (10.1016/S1003-6326(14)63344-6_bib9) 2011; 528 LIM (10.1016/S1003-6326(14)63344-6_bib6) 2004; 371 LI (10.1016/S1003-6326(14)63344-6_bib7) 2012; 22 GODARD (10.1016/S1003-6326(14)63344-6_bib10) 2002; 50 LIU (10.1016/S1003-6326(14)63344-6_bib16) 2010; 20 LIU (10.1016/S1003-6326(14)63344-6_bib17) 2012; 48 CHEN (10.1016/S1003-6326(14)63344-6_bib21) 2003; 142 ROBINSON (10.1016/S1003-6326(14)63344-6_bib5) 2001; 119 TANG (10.1016/S1003-6326(14)63344-6_bib8) 2012; 22 CHEN (10.1016/S1003-6326(14)63344-6_bib4) 2012; 22 LIU (10.1016/S1003-6326(14)63344-6_bib11) 2010; 20 ROBSON (10.1016/S1003-6326(14)63344-6_bib15) 2004; 382 KNIPLING (10.1016/S1003-6326(14)63344-6_bib20) 2006 LIU (10.1016/S1003-6326(14)63344-6_bib18) 2012; 18 LIU (10.1016/S1003-6326(14)63344-6_bib3) 2010; 507 CHAKRABARTI (10.1016/S1003-6326(14)63344-6_bib2) 2004; 28 LIU (10.1016/S1003-6326(14)63344-6_bib12) 2011 DONS (10.1016/S1003-6326(14)63344-6_bib14) 2001; 1 DENG (10.1016/S1003-6326(14)63344-6_bib22) 2011; 509 |
References_xml | – volume: 20 start-page: 1 year: 2010 end-page: 6 ident: bib11 article-title: Effect of step-quenching on microstructure of aluminum alloy 7055 [J] publication-title: Transactions of Nonferrous Metals Society of China contributor: fullname: ZHANG – volume: 142 start-page: 190 year: 2003 end-page: 196 ident: bib21 article-title: The improvement of constituent dissolution and mechanical properties of 7055 aluminum alloy by stepped heat treatments [J] publication-title: Journal of Materials Processing Technology contributor: fullname: ZHANG – volume: 50 start-page: 2319 year: 2002 end-page: 2329 ident: bib10 article-title: Precipitation sequences during quenching of the AA7010 alloy [J] publication-title: Acta Materialia contributor: fullname: AEBY-GAUTIER – volume: 48 start-page: 343 year: 2012 end-page: 350 ident: bib17 article-title: Influence of aging on the hardenability of 7055 aluminum alloy thick plate [J] publication-title: Acta Metallurgica Sinica contributor: fullname: ZHANG – volume: 22 start-page: 47 year: 2012 end-page: 52 ident: bib4 article-title: Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy [J] publication-title: Transactions of Nonferrous Metals Society of China contributor: fullname: CHEN – volume: 382 start-page: 112 year: 2004 end-page: 121 ident: bib15 article-title: Microstructural evolution in aluminium alloy 7050 during processing [J] publication-title: Materials Science and Engineering A contributor: fullname: ROBSON – volume: 20 start-page: 1102 year: 2010 end-page: 1109 ident: bib16 article-title: Effect of homogenization on quenching sensitivity of 7050 aluminum alloy plates [J] publication-title: The Chinese Journal of Nonferrous Metals contributor: fullname: ZHOU – year: 2006 ident: bib20 publication-title: Development of a nanoscale precipitation creep-resistant aluminum alloy containing trialuminide precipitates [D] contributor: fullname: KNIPLING – volume: 507 start-page: 53 year: 2010 end-page: 61 ident: bib3 article-title: Effect of microstructure on the quench sensitivity of AlZnMgCu alloys [J] publication-title: Journal of Alloys and Compounds contributor: fullname: ZHANG – volume: 528 start-page: 795 year: 2011 end-page: 802 ident: bib9 article-title: Effect of processing parameters on quench sensitivity of an AA7050 sheet [J] publication-title: Materials Science and Engineering A contributor: fullname: ZHOU – volume: 1 start-page: 133 year: 2001 end-page: 149 ident: bib14 article-title: The alstruc homogenization model for industrial aluminum alloys [J] publication-title: Journal of Light Metals contributor: fullname: DONS – volume: 28 start-page: 969 year: 2004 end-page: 974 ident: bib2 article-title: New generation high strength high damage tolerance 7085 thick alloy product with low quench sensitivity [J] publication-title: Materials Forum contributor: fullname: VENEMA – volume: 391 start-page: 367 year: 2005 end-page: 376 ident: bib19 article-title: On the nature of T(Al publication-title: Materials Science and Engineering A contributor: fullname: MUKHOPADHYAY – volume: 509 start-page: 4636 year: 2011 end-page: 4642 ident: bib22 article-title: Influence of Mg content on quench sensitivity of Al–Zn–Mg–Cu aluminum alloys [J] publication-title: Journal of Alloys and Compounds contributor: fullname: ZHANG – volume: 22 start-page: 268 year: 2012 end-page: 274 ident: bib7 article-title: Quench sensitivity and microstructure character of high strength AA7050 [J] publication-title: Transactions of Nonferrous Metals Society of China contributor: fullname: ZHU – volume: 18 start-page: 679 year: 2012 end-page: 683 ident: bib18 article-title: Influence of cooling rate after homogenization on the microstructure and mechanical properties of 7050 aluminum alloy [J] publication-title: Metals and Materials International contributor: fullname: ZHANG – year: 2012 ident: bib13 publication-title: Influence of homogenization treatment on the microstructures and mechanical properties of the aluminum alloy 7055 [D] contributor: fullname: LU – volume: 371 start-page: 82 year: 2004 end-page: 90 ident: bib6 article-title: Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications [J] publication-title: Materials Science and Engineering A contributor: fullname: NAM – year: 2011 ident: bib12 publication-title: Investigation on precipitation behavior during quenching and quench sensitivity of Al–Zn–Mg–Cu alloy [D] contributor: fullname: LIU – volume: 22 start-page: 1255 year: 2012 end-page: 1263 ident: bib8 article-title: Influence of quench-induced precipitation on aging behavior of Al–Zn–Mg–Cu alloy [J] publication-title: Transactions of Nonferrous Metals Society of China contributor: fullname: ZHANG – volume: 119 start-page: 261 year: 2001 end-page: 267 ident: bib5 article-title: Quench sensitivity and tensile property inhomogeneity in 7010 forgings [J] publication-title: Journal of Materials Processing Technology contributor: fullname: TANNER – volume: 20 start-page: 1 issue: 1 year: 2010 ident: 10.1016/S1003-6326(14)63344-6_bib11 article-title: Effect of step-quenching on microstructure of aluminum alloy 7055 [J] publication-title: Transactions of Nonferrous Metals Society of China doi: 10.1016/S1003-6326(09)60088-1 contributor: fullname: LIU – volume: 371 start-page: 82 issue: 1–2 year: 2004 ident: 10.1016/S1003-6326(14)63344-6_bib6 article-title: Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications [J] publication-title: Materials Science and Engineering A doi: 10.1016/S0921-5093(03)00653-1 contributor: fullname: LIM – year: 2012 ident: 10.1016/S1003-6326(14)63344-6_bib13 contributor: fullname: LU – volume: 1 start-page: 133 issue: 2 year: 2001 ident: 10.1016/S1003-6326(14)63344-6_bib14 article-title: The alstruc homogenization model for industrial aluminum alloys [J] publication-title: Journal of Light Metals doi: 10.1016/S1471-5317(01)00007-4 contributor: fullname: DONS – ident: 10.1016/S1003-6326(14)63344-6_bib1 – volume: 22 start-page: 268 issue: 2 year: 2012 ident: 10.1016/S1003-6326(14)63344-6_bib7 article-title: Quench sensitivity and microstructure character of high strength AA7050 [J] publication-title: Transactions of Nonferrous Metals Society of China doi: 10.1016/S1003-6326(11)61170-9 contributor: fullname: LI – year: 2006 ident: 10.1016/S1003-6326(14)63344-6_bib20 contributor: fullname: KNIPLING – volume: 50 start-page: 2319 issue: 9 year: 2002 ident: 10.1016/S1003-6326(14)63344-6_bib10 article-title: Precipitation sequences during quenching of the AA7010 alloy [J] publication-title: Acta Materialia doi: 10.1016/S1359-6454(02)00063-0 contributor: fullname: GODARD – volume: 48 start-page: 343 issue: 3 year: 2012 ident: 10.1016/S1003-6326(14)63344-6_bib17 article-title: Influence of aging on the hardenability of 7055 aluminum alloy thick plate [J] publication-title: Acta Metallurgica Sinica doi: 10.3724/SP.J.1037.2011.00517 contributor: fullname: LIU – volume: 382 start-page: 112 issue: 1–2 year: 2004 ident: 10.1016/S1003-6326(14)63344-6_bib15 article-title: Microstructural evolution in aluminium alloy 7050 during processing [J] publication-title: Materials Science and Engineering A doi: 10.1016/j.msea.2004.05.006 contributor: fullname: ROBSON – volume: 18 start-page: 679 issue: 4 year: 2012 ident: 10.1016/S1003-6326(14)63344-6_bib18 article-title: Influence of cooling rate after homogenization on the microstructure and mechanical properties of 7050 aluminum alloy [J] publication-title: Metals and Materials International doi: 10.1007/s12540-012-4016-9 contributor: fullname: LIU – volume: 507 start-page: 53 issue: 1 year: 2010 ident: 10.1016/S1003-6326(14)63344-6_bib3 article-title: Effect of microstructure on the quench sensitivity of AlZnMgCu alloys [J] publication-title: Journal of Alloys and Compounds doi: 10.1016/j.jallcom.2010.07.124 contributor: fullname: LIU – volume: 528 start-page: 795 issue: 3 year: 2011 ident: 10.1016/S1003-6326(14)63344-6_bib9 article-title: Effect of processing parameters on quench sensitivity of an AA7050 sheet [J] publication-title: Materials Science and Engineering A doi: 10.1016/j.msea.2010.07.033 contributor: fullname: ZHANG – volume: 119 start-page: 261 issue: 1–3 year: 2001 ident: 10.1016/S1003-6326(14)63344-6_bib5 article-title: Quench sensitivity and tensile property inhomogeneity in 7010 forgings [J] publication-title: Journal of Materials Processing Technology doi: 10.1016/S0924-0136(01)00927-X contributor: fullname: ROBINSON – volume: 509 start-page: 4636 issue: 13 year: 2011 ident: 10.1016/S1003-6326(14)63344-6_bib22 article-title: Influence of Mg content on quench sensitivity of Al–Zn–Mg–Cu aluminum alloys [J] publication-title: Journal of Alloys and Compounds doi: 10.1016/j.jallcom.2011.01.147 contributor: fullname: DENG – volume: 22 start-page: 47 issue: 1 year: 2012 ident: 10.1016/S1003-6326(14)63344-6_bib4 article-title: Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy [J] publication-title: Transactions of Nonferrous Metals Society of China doi: 10.1016/S1003-6326(11)61138-2 contributor: fullname: CHEN – volume: 142 start-page: 190 issue: 1 year: 2003 ident: 10.1016/S1003-6326(14)63344-6_bib21 article-title: The improvement of constituent dissolution and mechanical properties of 7055 aluminum alloy by stepped heat treatments [J] publication-title: Journal of Materials Processing Technology doi: 10.1016/S0924-0136(03)00597-1 contributor: fullname: CHEN – volume: 22 start-page: 1255 issue: 6 year: 2012 ident: 10.1016/S1003-6326(14)63344-6_bib8 article-title: Influence of quench-induced precipitation on aging behavior of Al–Zn–Mg–Cu alloy [J] publication-title: Transactions of Nonferrous Metals Society of China doi: 10.1016/S1003-6326(11)61313-7 contributor: fullname: TANG – volume: 391 start-page: 367 issue: 1–2 year: 2005 ident: 10.1016/S1003-6326(14)63344-6_bib19 article-title: On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy [J] publication-title: Materials Science and Engineering A doi: 10.1016/j.msea.2004.09.013 contributor: fullname: MONDAL – volume: 28 start-page: 969 year: 2004 ident: 10.1016/S1003-6326(14)63344-6_bib2 article-title: New generation high strength high damage tolerance 7085 thick alloy product with low quench sensitivity [J] publication-title: Materials Forum contributor: fullname: CHAKRABARTI – year: 2011 ident: 10.1016/S1003-6326(14)63344-6_bib12 contributor: fullname: LIU – volume: 20 start-page: 1102 issue: 6 year: 2010 ident: 10.1016/S1003-6326(14)63344-6_bib16 article-title: Effect of homogenization on quenching sensitivity of 7050 aluminum alloy plates [J] publication-title: The Chinese Journal of Nonferrous Metals contributor: fullname: LIU |
SSID | ssj0044661 |
Score | 2.2339096 |
Snippet | The effect of homogenization time on quench sensitivity of a cast 7085 aluminum alloy was investigated by means of end-quenching test, optical microscope (OM),... |
SourceID | crossref elsevier |
SourceType | Aggregation Database Publisher |
StartPage | 2275 |
SubjectTerms | 7085 aluminum alloy Al3Zr dispersoids end quenching equilibrium η phase homogenization quench sensitivity |
Title | Effect of homogenization time on quench sensitivity of 7085 aluminum alloy |
URI | https://dx.doi.org/10.1016/S1003-6326(14)63344-6 |
Volume | 24 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV07T8MwED71scCAeIryqDwwwJA2ru3EGauKqhTRBSp1s1wnVjs0qaAdWPjtnPOAIiEGpihW7hRdLt99J9-dAW5i7evAmrknpI49HsXSkzHX6MtIny3GLytcN_LTJBhN-XgmZjUYVL0wrqyyxP4C03O0Lle6pTW76-Wy-0zdLBVkH_ivM4ZZTR2aGI44b0Cz__A4mlSA7HYs87zLlWE5ge9GnkJJvnhL-V2uxwt-D1E7YWd4CAclXyT94pWOoJakx7C_M0XwBMbFBGKSWbLIVhl6RNlbSdzB8QSvebX0gry5YvXitAj3cIg8iGgEp2W6XRG3Af9-CtPh_ctg5JVHJHiGhWKDUBVSbiJuMM2VYS_AgKR1grSp5wuhMV1gxve1Nb7Fm0hb6vpcJZM9qzmNLGVn0EizNDkHEkkrKLOIkIlBfZi5BnNfSEZpLGPKZAs6lVXUupiEob5KxJwZlTMjphIqN6MKWiAr26kfn1QhWv8tevF_0UvYQ07Di4raK2hsXrfJNfKGzbwN9c4HbZfe8Qm5Rbor |
link.rule.ids | 315,786,790,4521,24144,27957,27958,45620,45714 |
linkProvider | Elsevier |
linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV09T8MwED2VMgAD4lOUTw8MMKSNaztxRlRRldJ2oZW6WW4Siw5NKmgHFn475zgtRUIMTFEi24ouzrt38rs7gNtE-zow8cQTUicejxLpyYRr3MtInw36LyNsNnJ_EHRGvDsW4wq0VrkwVlZZYr_D9AKtyyeN0pqN-XTaeKG2lgqyD_zXGcOoZgu2LZ23_Rvqn2udhz2vLKIuK8Kyw7_TeNwSxcM7yu-LVbzgdwe14XTaB7BfskXy4F7oECppdgR7GzUEj6Hr6g-T3JDXfJbjfigzK4ltG0_wWmilX8m7laq7XhF2cIgsiGiEpmm2nBF7_P5xAqP247DV8coGCV7MQrFAoAopjyMeY5Arw2aA7kjrFElT0xdCY7DAYt_XJvYN3kTaUJvlKplsGs1pZCg7hWqWZ-kZkEgaQZlBfExjXA_j1mDiC8koTWRCmaxBfWUVNXd1MNRaIGbNqKwZMZBQhRlVUAO5sp368UEVYvXfU8__P_UGdjrDfk_1ngbPF7CL7IY7be0lVBdvy_QKGcRicl3skC89Cbr5 |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effect+of+homogenization+time+on+quench+sensitivity+of+7085+aluminum+alloy&rft.jtitle=Transactions+of+Nonferrous+Metals+Society+of+China&rft.au=ZHENG%2C+Yu-lin&rft.au=LI%2C+Cheng-bo&rft.au=LIU%2C+Sheng-dan&rft.au=DENG%2C+Yun-lai&rft.date=2014-07-01&rft.issn=1003-6326&rft.volume=24&rft.issue=7&rft.spage=2275&rft.epage=2281&rft_id=info:doi/10.1016%2FS1003-6326%2814%2963344-6&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_S1003_6326_14_63344_6 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1003-6326&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1003-6326&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1003-6326&client=summon |