Abrasive Water Jet Machining process: A state of art of review

Nowadays, advanced machining techniques are widely used for solving various issues in manufacturing operations that include machining high strength materials, production of complex shaped profiles, better surface features, capable of high levels of precision, miniaturization, reduction of waste and...

Full description

Saved in:
Bibliographic Details
Published inJournal of manufacturing processes Vol. 49; pp. 271 - 322
Main Authors Natarajan, Yuvaraj, Murugesan, Pradeep Kumar, Mohan, Mugilvalavan, Liyakath Ali Khan, Shakeel Ahmed
Format Journal Article
LanguageEnglish
Published Elsevier Ltd 01.01.2020
Subjects
Abrasive water jet
Future opportunities
Literature survey
Recent trends
Recent trends
Future opportunities
Abrasive water jet
Literature survey
Online AccessGet full text

Cover

Abstract Nowadays, advanced machining techniques are widely used for solving various issues in manufacturing operations that include machining high strength materials, production of complex shaped profiles, better surface features, capable of high levels of precision, miniaturization, reduction of waste and secondary operations and lower production time. Among the various advanced machining techniques, abrasive water jet (AWJ) machining has received more attention from researchers and practicing engineers in manufacturing industries due to its capability of extensive operations and excellent quality of the cutting edge obtained during this process much superior to others, is reported by previous researchers. AWJ process is classified into abrasive water injection jet and abrasive slurry jet on the basis of the different ways of mixing between abrasive and water. This study explores the researches made on Injection type AWJ machining process as it is widely accepted by researchers and Industries for solving various issues. Review articles on AWJ have been collected from the year of 1960–2019. Hence, this study provides a detailed report on AWJ machining process (majority of discussion on metals and their compounds) through demonstration of various studies on subjects that include performance and surface characteristics, hybrid processes, versatile operations, micro machining and medical applications. A literature survey of recent trends and their applications of AWJ process has also been documented. Optimization studies have been discussed with various techniques used in the AWJ machining process. This has been referred to in this paper. In addition, future opportunties in AWJ have been discussed including a demand for requirements in various fields. The entire collection of results are of help in finding the niche applications for manufacturing operations in future. The outcome of this paper would also support present and future researchers in the identification of the significant process parameters, work materials and advanced techniques for getting better results in AWJ machining process.
AbstractList Nowadays, advanced machining techniques are widely used for solving various issues in manufacturing operations that include machining high strength materials, production of complex shaped profiles, better surface features, capable of high levels of precision, miniaturization, reduction of waste and secondary operations and lower production time. Among the various advanced machining techniques, abrasive water jet (AWJ) machining has received more attention from researchers and practicing engineers in manufacturing industries due to its capability of extensive operations and excellent quality of the cutting edge obtained during this process much superior to others, is reported by previous researchers. AWJ process is classified into abrasive water injection jet and abrasive slurry jet on the basis of the different ways of mixing between abrasive and water. This study explores the researches made on Injection type AWJ machining process as it is widely accepted by researchers and Industries for solving various issues. Review articles on AWJ have been collected from the year of 1960–2019. Hence, this study provides a detailed report on AWJ machining process (majority of discussion on metals and their compounds) through demonstration of various studies on subjects that include performance and surface characteristics, hybrid processes, versatile operations, micro machining and medical applications. A literature survey of recent trends and their applications of AWJ process has also been documented. Optimization studies have been discussed with various techniques used in the AWJ machining process. This has been referred to in this paper. In addition, future opportunties in AWJ have been discussed including a demand for requirements in various fields. The entire collection of results are of help in finding the niche applications for manufacturing operations in future. The outcome of this paper would also support present and future researchers in the identification of the significant process parameters, work materials and advanced techniques for getting better results in AWJ machining process.
Author Natarajan, Yuvaraj
Liyakath Ali Khan, Shakeel Ahmed
Murugesan, Pradeep Kumar
Mohan, Mugilvalavan
Author_xml – sequence: 1
  givenname: Yuvaraj
  orcidid: 0000-0001-6526-4523
  surname: Natarajan
  fullname: Natarajan, Yuvaraj
  email: yuvaceg09@gmail.com
  organization: Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai-62, India
– sequence: 2
  givenname: Pradeep Kumar
  surname: Murugesan
  fullname: Murugesan, Pradeep Kumar
  organization: Department of Mechanical Engineering, College of Engineering Guindy, Anna University, Chennai-25, India
– sequence: 3
  givenname: Mugilvalavan
  surname: Mohan
  fullname: Mohan, Mugilvalavan
  organization: Department of Mechanical Engineering, College of Engineering Guindy, Anna University, Chennai-25, India
– sequence: 4
  givenname: Shakeel Ahmed
  surname: Liyakath Ali Khan
  fullname: Liyakath Ali Khan, Shakeel Ahmed
  organization: Department of Mechanical Engineering, Adhiyamaan College of Engineering, Hosur-109, India
BookMark eNqFkMFKw0AQhhepYFt9Aw_7Aok7u8k26aFQilal4kXxuGwnE93QJmV3qfj2JtSTBz39MMP3M_NN2KjtWmLsGkQKAvRNkzZ7e_BdKgWUKUAqlDhjYylBJpkGPWJjyKVONMj8gk1CaIQAmQkYs8Vy621wR-JvNpLnjxT5k8UP17r2nfedSCHM-ZKH2O95V3Pr4xCejo4-L9l5bXeBrn5yyl7vbl9W98nmef2wWm4SVDMZE1VXW1QgigrIFnqbU4E4K9TMFpm1VIm8BK2HOWaqLisCKa0CrZDqzJaopmx-6kXfheCpNuj6g1zXRm_dzoAwgwnTmJMJM5gwAKY30cPZL_jg3d76r_-wxQmj_rH-WW8COmqRKucJo6k693fBN5gafGM
CitedBy_id crossref_primary_10_3390_mi14040852
crossref_primary_10_1051_mfreview_2024019
crossref_primary_10_3390_app10093159
crossref_primary_10_1108_RPJ_06_2021_0133
crossref_primary_10_1007_s43452_024_01029_x
crossref_primary_10_5937_fme2004954K
crossref_primary_10_1007_s00603_024_04297_4
crossref_primary_10_1016_j_ijlmm_2023_03_002
crossref_primary_10_1016_j_porgcoat_2025_109137
crossref_primary_10_3390_ma14206019
crossref_primary_10_1016_j_jmapro_2024_03_044
crossref_primary_10_3390_app11209410
crossref_primary_10_1016_j_jobe_2024_108623
crossref_primary_10_1016_j_heliyon_2024_e37282
crossref_primary_10_1007_s00170_022_09091_6
crossref_primary_10_1007_s12008_023_01312_w
crossref_primary_10_1016_j_surfcoat_2025_131770
crossref_primary_10_1007_s40964_023_00533_5
crossref_primary_10_1111_ffe_14351
crossref_primary_10_1016_j_jmapro_2024_02_003
crossref_primary_10_1007_s00170_024_14013_9
crossref_primary_10_2174_1874210602115010708
crossref_primary_10_1088_2053_1591_accd3f
crossref_primary_10_1177_13506501221144722
crossref_primary_10_1016_j_jmapro_2023_04_011
crossref_primary_10_1016_j_matpr_2023_03_756
crossref_primary_10_1016_j_jmatprotec_2024_118643
crossref_primary_10_1016_j_jmapro_2025_01_027
crossref_primary_10_1007_s12206_021_1220_x
crossref_primary_10_1016_j_jclepro_2020_121225
crossref_primary_10_1016_j_jmapro_2022_11_050
crossref_primary_10_1007_s43452_022_00465_x
crossref_primary_10_1007_s00170_023_12428_4
crossref_primary_10_1007_s12008_024_02082_9
crossref_primary_10_1177_09544089241312610
crossref_primary_10_7736_JKSPE_024_096
crossref_primary_10_1007_s00170_024_13321_4
crossref_primary_10_1016_j_wear_2025_205918
crossref_primary_10_3390_ma17122964
crossref_primary_10_1007_s10706_023_02739_4
crossref_primary_10_1177_09544062211063752
crossref_primary_10_3390_app11083344
crossref_primary_10_1111_1541_4337_12896
crossref_primary_10_1007_s40430_023_04223_9
crossref_primary_10_1007_s00170_022_09077_4
crossref_primary_10_1007_s00170_024_13084_y
crossref_primary_10_1016_j_egyr_2022_09_035
crossref_primary_10_3390_jcs6050150
crossref_primary_10_1007_s11665_023_08413_3
crossref_primary_10_3390_met11010164
crossref_primary_10_1016_j_matpr_2020_05_741
crossref_primary_10_3390_agriculture11050392
crossref_primary_10_1007_s40430_023_04306_7
crossref_primary_10_1007_s00170_024_14401_1
crossref_primary_10_1016_j_cirpj_2022_12_017
crossref_primary_10_1016_j_ceramint_2023_12_391
crossref_primary_10_1007_s40571_023_00638_2
crossref_primary_10_3390_su13168917
crossref_primary_10_1002_pc_27026
crossref_primary_10_3390_app11114925
crossref_primary_10_3390_machines12030168
crossref_primary_10_1016_j_applthermaleng_2023_121567
crossref_primary_10_1007_s00170_023_11601_z
crossref_primary_10_1007_s00170_021_07614_1
crossref_primary_10_1134_S0036029522040115
crossref_primary_10_1007_s00170_025_15074_0
crossref_primary_10_1016_j_jmrt_2023_09_045
crossref_primary_10_1080_01430750_2021_1873851
crossref_primary_10_1007_s00170_021_06954_2
crossref_primary_10_3390_app10041512
crossref_primary_10_1016_j_ijmst_2023_04_003
crossref_primary_10_1016_j_jmapro_2024_12_047
crossref_primary_10_3390_ma17133273
crossref_primary_10_1007_s00603_024_04277_8
crossref_primary_10_3390_ma13173878
crossref_primary_10_1016_j_mssp_2024_108923
crossref_primary_10_3390_ma17102401
crossref_primary_10_1108_AEAT_03_2023_0068
crossref_primary_10_1016_j_dajour_2024_100451
crossref_primary_10_1142_S0218625X23500038
crossref_primary_10_3390_app12188988
crossref_primary_10_1080_10910344_2024_2332874
crossref_primary_10_3390_mi15101253
crossref_primary_10_1016_j_precisioneng_2025_02_008
crossref_primary_10_3390_ma16062182
crossref_primary_10_1177_09544089231157972
crossref_primary_10_1088_2631_8695_ad8a17
crossref_primary_10_1016_j_matpr_2022_02_463
crossref_primary_10_1111_1541_4337_70039
crossref_primary_10_1080_2374068X_2022_2077535
crossref_primary_10_3390_app14188512
crossref_primary_10_1088_1757_899X_1182_1_012027
crossref_primary_10_3390_ma16247532
crossref_primary_10_1177_16878132221123426
crossref_primary_10_1016_j_ijsolstr_2025_113223
crossref_primary_10_3390_agriculture13040880
crossref_primary_10_1007_s11837_023_05857_9
crossref_primary_10_1016_j_petrol_2021_108489
crossref_primary_10_1016_j_precisioneng_2023_04_003
crossref_primary_10_31590_ejosat_802907
crossref_primary_10_3390_lubricants11080324
crossref_primary_10_1108_MMMS_11_2022_0254
crossref_primary_10_1016_j_matpr_2022_10_037
crossref_primary_10_3390_ma14247542
crossref_primary_10_1016_j_geoen_2024_213170
crossref_primary_10_1007_s00170_024_13009_9
crossref_primary_10_1177_09544089221093988
crossref_primary_10_1007_s12008_024_01831_0
crossref_primary_10_1016_j_matpr_2021_07_157
crossref_primary_10_1016_j_precisioneng_2023_08_003
crossref_primary_10_1016_j_jmapro_2025_02_048
crossref_primary_10_3390_ma14113108
crossref_primary_10_1007_s00170_022_10538_z
crossref_primary_10_1007_s00170_024_13914_z
crossref_primary_10_1007_s40436_023_00443_3
crossref_primary_10_1007_s00170_023_12283_3
crossref_primary_10_1007_s12008_023_01539_7
crossref_primary_10_1007_s00170_022_10710_5
crossref_primary_10_1016_j_jmapro_2024_01_066
crossref_primary_10_1016_j_matpr_2023_02_189
crossref_primary_10_1016_j_surfcoat_2024_130409
crossref_primary_10_1007_s43452_024_01035_z
crossref_primary_10_1016_j_jmapro_2023_10_067
crossref_primary_10_1177_09544089221085325
crossref_primary_10_1016_j_surfcoat_2022_129186
crossref_primary_10_3390_jmmp9030080
crossref_primary_10_1088_1742_6596_1985_1_012014
crossref_primary_10_3390_jmmp4010019
crossref_primary_10_1088_2051_672X_ac577e
crossref_primary_10_3390_su16209100
crossref_primary_10_1016_j_jmapro_2023_11_037
crossref_primary_10_1016_j_procir_2020_11_011
crossref_primary_10_1016_j_tust_2022_104366
crossref_primary_10_1007_s00170_020_05803_y
crossref_primary_10_1007_s40799_022_00585_2
crossref_primary_10_1016_j_ijmachtools_2024_104145
crossref_primary_10_3390_ma15020486
crossref_primary_10_1002_pc_29277
crossref_primary_10_1063_5_0192582
crossref_primary_10_1590_0370_44672024780014
crossref_primary_10_1016_j_jmrt_2024_02_134
crossref_primary_10_1016_j_engfracmech_2022_108647
crossref_primary_10_1016_j_mfglet_2020_10_002
crossref_primary_10_1016_j_matpr_2022_04_567
crossref_primary_10_1016_j_diamond_2024_111661
crossref_primary_10_1016_j_powtec_2021_11_065
crossref_primary_10_35633_inmateh_73_63
crossref_primary_10_1520_SSMS20210018
crossref_primary_10_1016_j_vacuum_2023_111872
crossref_primary_10_1016_j_wear_2022_204369
crossref_primary_10_3390_lubricants10100237
crossref_primary_10_1051_e3sconf_202343001213
crossref_primary_10_1142_S0218625X24501361
crossref_primary_10_1080_10426914_2024_2395005
crossref_primary_10_1007_s12633_020_00888_2
crossref_primary_10_1088_2053_1591_acdfa9
crossref_primary_10_1016_j_matpr_2022_05_373
crossref_primary_10_3390_app14051741
crossref_primary_10_1177_15280837221121961
crossref_primary_10_36306_konjes_1091584
crossref_primary_10_1016_j_jmapro_2023_10_014
crossref_primary_10_1142_S0218625X21501201
crossref_primary_10_1088_1757_899X_1009_1_012048
crossref_primary_10_3390_jmmp6020031
crossref_primary_10_3390_su151713065
crossref_primary_10_1007_s00170_021_08294_7
crossref_primary_10_1063_5_0204518
crossref_primary_10_1007_s00603_023_03222_5
crossref_primary_10_1051_mfreview_2020029
crossref_primary_10_1088_2631_8695_ad51d3
crossref_primary_10_1016_j_jmrt_2023_01_054
crossref_primary_10_1016_j_surfcoat_2024_131094
crossref_primary_10_1371_journal_pone_0270505
crossref_primary_10_3390_ma14247746
crossref_primary_10_1016_j_tust_2022_104473
crossref_primary_10_1016_j_susmat_2024_e01211
crossref_primary_10_3390_met13101645
crossref_primary_10_1016_j_jmrt_2024_07_049
crossref_primary_10_3390_ma16155405
crossref_primary_10_1007_s00170_024_12948_7
crossref_primary_10_1080_10426914_2021_1954194
crossref_primary_10_1080_10426914_2022_2032145
crossref_primary_10_1177_09544062211046902
crossref_primary_10_1016_j_jer_2024_05_003
crossref_primary_10_1016_j_matpr_2022_04_990
crossref_primary_10_1016_j_ijmecsci_2024_109830
crossref_primary_10_1016_j_powtec_2024_120427
crossref_primary_10_3390_w15162904
crossref_primary_10_1111_ijac_14999
crossref_primary_10_3390_app13063774
crossref_primary_10_1080_10426914_2022_2146711
crossref_primary_10_1007_s10751_024_02019_4
crossref_primary_10_1016_j_precisioneng_2022_10_009
crossref_primary_10_1142_S0218625X22500469
crossref_primary_10_1002_masy_202100280
crossref_primary_10_1080_2374068X_2020_1815136
crossref_primary_10_1016_j_asoc_2020_107075
crossref_primary_10_1007_s11465_023_0766_y
crossref_primary_10_1007_s43452_022_00578_3
crossref_primary_10_1016_j_jmapro_2020_10_036
crossref_primary_10_1007_s40962_023_01071_0
crossref_primary_10_3390_ma13122685
crossref_primary_10_1016_j_compositesa_2024_108055
crossref_primary_10_3103_S1068375524010125
crossref_primary_10_3390_met11091362
crossref_primary_10_3323_jcorr_72_169
crossref_primary_10_1016_j_matpr_2021_08_253
crossref_primary_10_3390_ma17010011
crossref_primary_10_3390_mi14081526
crossref_primary_10_3390_machines12060408
crossref_primary_10_1016_j_conbuildmat_2024_139128
crossref_primary_10_1142_S0218625X23300010
crossref_primary_10_1007_s11665_024_10198_y
crossref_primary_10_1016_j_jmapro_2024_01_004
crossref_primary_10_1080_10426914_2021_1914849
crossref_primary_10_1016_j_powtec_2024_119458
crossref_primary_10_3390_met11010074
crossref_primary_10_1007_s00170_020_05246_5
crossref_primary_10_6000_1929_5995_2023_12_11
crossref_primary_10_1038_s41598_025_91213_7
crossref_primary_10_1142_S0218625X25500763
crossref_primary_10_1007_s00170_025_15300_9
crossref_primary_10_1299_jfst_2023jfst0009
crossref_primary_10_54033_cadpedv20n9_010
crossref_primary_10_1016_j_measurement_2024_114912
crossref_primary_10_1007_s00170_025_15263_x
crossref_primary_10_1016_j_procir_2024_08_404
crossref_primary_10_1016_j_jrmge_2024_03_032
crossref_primary_10_3390_machines10090756
crossref_primary_10_1007_s13369_021_05591_x
crossref_primary_10_3390_ma15196894
crossref_primary_10_1007_s13369_024_09901_x
crossref_primary_10_3390_foods13213454
crossref_primary_10_1051_e3sconf_202339101077
crossref_primary_10_1016_j_jclepro_2023_136584
Cites_doi 10.1016/j.ijimpeng.2004.09.006
10.1504/IJSURFSE.2009.027421
10.1016/S0007-8506(07)63073-X
10.1016/j.jmatprotec.2009.08.011
10.4028/www.scientific.net/AMM.308.7
10.1080/10426914.2011.593231
10.1016/j.eswa.2011.01.026
10.1080/10426914.2014.994763
10.4028/www.scientific.net/AMR.891-892.1761
10.13189/ujme.2014.020502
10.1155/2018/8904234
10.4028/www.scientific.net/KEM.487.327
10.1081/AMP-120005380
10.1016/j.procir.2016.03.009
10.1520/JTE20180856
10.1080/10426914.2010.502953
10.1016/S0890-6955(02)00017-2
10.1243/0954405001517847
10.1016/S0043-1648(97)00087-2
10.1080/10910344.2017.1283958
10.1016/j.jmatprotec.2007.03.071
10.1007/978-94-011-2678-6_33
10.1007/s00170-011-3258-x
10.1016/j.procir.2012.04.073
10.1007/BF03266595
10.15623/ijret.2015.0409064
10.1081/MST-200028726
10.1080/02533839.2015.1010944
10.1080/10910340600710105
10.4028/www.scientific.net/AMR.325.621
10.1016/j.ijmachtools.2009.02.005
10.1016/S0890-6955(02)00081-0
10.1016/j.matdes.2006.04.020
10.1177/095440540421800504
10.4028/www.scientific.net/KEM.304-305.560
10.1016/j.asoc.2011.05.024
10.1007/s00170-011-3511-3
10.1007/s00170-014-6578-9
10.1016/0043-1648(63)90073-5
10.1016/j.ijmachtools.2009.04.003
10.1016/j.wear.2008.06.013
10.2351/1.2900554
10.1016/j.procir.2018.09.037
10.1007/s00170-016-8776-0
10.1016/j.jmatprotec.2008.10.009
10.1088/2053-1591/ab0c35
10.1007/s00170-018-2697-z
10.1016/j.jma.2018.07.001
10.1016/j.jmapro.2018.08.017
10.1007/s40684-019-00072-x
10.1007/s00170-013-5474-z
10.1016/j.cirpj.2015.04.002
10.1007/s00170-016-9154-7
10.1007/978-3-319-51961-6_4
10.1016/j.wear.2008.01.018
10.1016/j.mspro.2014.07.017
10.1016/j.jmatprotec.2010.08.006
10.1080/10426914.2015.1103859
10.1080/10426914.2016.1244844
10.2298/TSCI150212046P
10.1016/j.wear.2016.05.008
10.1243/09544054JEM1226
10.1016/j.wear.2008.01.014
10.4028/www.scientific.net/KEM.431-432.261
10.1016/j.jmatprotec.2009.05.025
10.1016/j.procir.2014.04.065
10.1002/bjs.1800690212
10.1016/S0924-0136(97)00278-1
10.1016/j.ijmachtools.2009.07.007
10.1177/0954411918790777
10.1016/j.procir.2012.04.072
10.1016/j.jmatprotec.2004.01.013
10.1016/j.jmatprotec.2006.03.124
10.1016/S0043-1648(01)00826-2
10.1016/0043-1648(60)90055-7
10.1016/j.matchar.2004.12.008
10.1016/j.jmapro.2009.12.001
10.1007/BF01154616
10.1007/s00170-005-2536-x
10.1016/j.wear.2007.09.008
10.1016/j.ijmachtools.2003.12.007
10.1016/j.wear.2009.02.008
10.1016/S0890-6955(98)00078-9
10.1080/10426914.2014.952020
10.1016/j.jmapro.2017.05.017
10.1016/j.ceramint.2013.12.137
10.1016/S0890-6955(02)00069-X
10.1016/j.proeng.2016.06.680
10.4028/www.scientific.net/KEM.404.33
10.1016/S0043-1648(03)00256-4
10.1016/j.cam.2012.04.022
10.1016/0043-1648(93)90279-U
10.1016/S0924-0136(02)00437-5
10.1007/s11595-011-0174-8
10.1016/j.cirp.2013.03.021
10.1016/j.wear.2004.04.005
10.1007/s00170-018-1973-2
10.1016/0022-3468(94)90732-3
10.1016/j.jmatprotec.2007.01.039
10.1080/10426914.2018.1544707
10.1016/j.matdes.2008.05.049
10.1177/1687814015597619
10.1007/BF02317567
10.1007/s00170-014-5869-5
10.1080/10426914.2016.1176183
10.1016/S0890-6955(01)00147-X
10.1007/s00170-017-0979-5
10.1007/s00170-011-3761-0
10.1016/j.compositesa.2008.04.001
10.1080/10426914.2014.930949
10.1016/S0924-0136(01)00579-9
10.1016/0043-1648(63)90003-6
10.1016/j.ijfatigue.2018.02.022
10.1007/BF00647245
10.1016/j.jmatprotec.2004.05.024
10.1002/1097-4636(200009)53:5<536::AID-JBM13>3.0.CO;2-V
10.1016/j.ijmachtools.2005.01.020
10.47893/IJARME.2011.1022
10.1007/s11465-012-0337-0
10.1115/1.2831067
10.1007/s11665-009-9513-8
10.1016/j.jmatprotec.2007.10.024
10.1016/j.meatsci.2008.11.010
10.1080/10910344.2012.698935
10.5937/fmet1602133K
10.1016/j.minpro.2010.03.003
10.1007/s00170-011-3815-3
10.1016/0278-6125(91)90045-4
10.1080/10426914.2016.1221093
10.1007/s00170-018-1635-4
10.1002/jbm.b.10078
10.1016/j.jmatprotec.2010.12.015
10.1016/j.mspro.2014.07.346
10.1007/s00170-014-6528-6
10.3139/217.2925
10.1016/j.cirp.2009.03.022
10.1080/02670844.2017.1394564
10.1007/BF00356252
10.1007/s00170-005-0398-x
10.1016/j.ijmecsci.2006.09.005
10.1016/0043-1648(95)90158-2
10.1016/0378-3804(88)90034-4
10.1016/j.asoc.2007.06.007
10.1007/s13369-015-1775-x
10.4028/www.scientific.net/AMR.264-265.1015
10.1016/j.ijmachtools.2008.10.001
10.1007/s12206-015-1242-3
10.1081/MST-120022777
10.1007/s00170-012-4373-z
10.1007/s00170-011-3788-2
10.1155/2014/624203
10.1243/095440503772680631
ContentType Journal Article
Copyright 2019 The Society of Manufacturing Engineers
Copyright_xml – notice: 2019 The Society of Manufacturing Engineers
DBID AAYXX
CITATION
DOI 10.1016/j.jmapro.2019.11.030
DatabaseName CrossRef
DatabaseTitle CrossRef
DatabaseTitleList
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 2212-4616
EndPage 322
ExternalDocumentID 10_1016_j_jmapro_2019_11_030
S1526612519304219
GroupedDBID --K
--M
.~1
0R~
1B1
1~.
1~5
29K
3V.
4.4
457
4G.
5GY
5VS
7-5
71M
7WY
883
88I
8AO
8FE
8FG
8FL
8FW
8P~
8R4
8R5
9M8
AACTN
AAEDT
AAEDW
AAIAV
AAIKJ
AAKOC
AALRI
AAOAW
AAQFI
AAQXK
AAXUO
ABFNM
ABJCF
ABJNI
ABMAC
ABUWG
ABXDB
ABYKQ
ACDAQ
ACGFS
ACGOD
ACIWK
ACNNM
ACRLP
ADBBV
ADEZE
ADMUD
ADTZH
AEBSH
AECPX
AEKER
AENEX
AFFNX
AFKRA
AFKWA
AFTJW
AGHFR
AGUBO
AGYEJ
AHJVU
AIEXJ
AIKHN
AITUG
AJBFU
AJOXV
ALMA_UNASSIGNED_HOLDINGS
AMFUW
AMRAJ
ASPBG
AVWKF
AXJTR
AZFZN
AZQEC
BENPR
BEZIV
BGLVJ
BJAXD
BKOJK
BLXMC
BPHCQ
CCPQU
CS3
D-I
DU5
DWQXO
E3Z
EBS
EFJIC
EFLBG
EJD
EP2
EP3
FDB
FEDTE
FGOYB
FIRID
FNPLU
FRNLG
FYGXN
GBLVA
GNUQQ
GROUPED_ABI_INFORM_COMPLETE
GROUPED_ABI_INFORM_RESEARCH
HCIFZ
HVGLF
HZ~
H~9
J1W
JJJVA
K60
K6~
KOM
L6V
M0C
M0F
M2P
M41
M7S
MO0
N9A
O-L
O9-
OAUVE
OZT
P-8
P-9
P2P
PC.
PQBIZ
PQQKQ
PROAC
PTHSS
Q2X
Q38
R2-
RIG
RNS
ROL
RWL
S0X
SDF
SES
SPC
SPCBC
SST
SSZ
T5K
TAE
TN5
U5U
~G-
AATTM
AAXKI
AAYWO
AAYXX
ABWVN
ACRPL
ACVFH
ADCNI
ADNMO
AEIPS
AEUPX
AFJKZ
AFPUW
AFXIZ
AGCQF
AGQPQ
AGRNS
AIGII
AIIUN
AKBMS
AKRWK
AKYEP
ANKPU
APXCP
BNPGV
CITATION
PHGZM
PHGZT
PQBZA
SSH
ID FETCH-LOGICAL-c372t-3fdbc3108d1ea86b5e8cc7837a84aaed0591666b5ec43f9de122a3163cef4a9c3
IEDL.DBID .~1
ISSN 1526-6125
IngestDate Tue Jul 01 02:23:32 EDT 2025
Thu Apr 24 23:09:12 EDT 2025
Fri Feb 23 02:49:12 EST 2024
IsPeerReviewed true
IsScholarly true
Keywords Recent trends
Future opportunities
Abrasive water jet
Literature survey
Language English
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c372t-3fdbc3108d1ea86b5e8cc7837a84aaed0591666b5ec43f9de122a3163cef4a9c3
ORCID 0000-0001-6526-4523
PageCount 52
ParticipantIDs crossref_citationtrail_10_1016_j_jmapro_2019_11_030
crossref_primary_10_1016_j_jmapro_2019_11_030
elsevier_sciencedirect_doi_10_1016_j_jmapro_2019_11_030
ProviderPackageCode CITATION
AAYXX
PublicationCentury 2000
PublicationDate January 2020
2020-01-00
PublicationDateYYYYMMDD 2020-01-01
PublicationDate_xml – month: 01
  year: 2020
  text: January 2020
PublicationDecade 2020
PublicationTitle Journal of manufacturing processes
PublicationYear 2020
Publisher Elsevier Ltd
Publisher_xml – name: Elsevier Ltd
References Palleda (bib0260) 2007; 189
Liu, Schubert, McNiel (bib0765) 2011; 4
Lv, Huang, Zhu, Wang, Wang, Yao (bib0530) 2015; 78
Zeng, Kim (bib0080) 1992
Kartal, Çetin, Gökkaya, Yerlikaya (bib0685) 2014; 29
Li, Wang, Ali (bib0700) 2012; 697
Zhang, Wu, Chen (bib0730) 2011; 9
Jurkovic, Perinic, Maricic, Sekulic, Mandic (bib1045) 2012; 16
Zohoor, Nourian (bib0440) 2012; 61
Sharma, Lalwani (bib0115) 2013
Fowler, Shipway, Pashby (bib0165) 2005; 159
Orbanic, Junkar (bib0595) 2004; 218
Sadasivam, Hizal, Arola (bib0625) 2009; 49
Akkurt (bib0105) 2010; 19
Cenac, Zitoune, Collombet, Deleris (bib0710) 2015; 229
Hlaváč, Hlaváčová, Geryk, Plančár (bib0430) 2015; 77
Yuvaraj, Kumar (bib0325) 2017; 32
Hashish (bib0610) 2009
Uthayakumar, Khan, Kumaran, Slota, Zajac (bib0295) 2016; 31
Jegaraj, Babu (bib0195) 2007; 185
Srinivas, Babu (bib0285) 2011; 1
Gupta, Avvari, Mashamba, Mallaiah (bib0490) 2017
Arola, Alade, Weber (bib0630) 2006; 10
Bach, Hassel, Biskup, Schenk, Pude, Hinte (bib0515) 2010
Kanthababu, Chetty (bib0200) 2006; 29
Dadkhahipour, Wang (bib0715) 2011; 325
Manu, Babu (bib0340) 2009; 266
Haghbin, Spelt, Papini (bib0555) 2018; 35
Jegaraj, Babu (bib0190) 2005; 45
Hata, Sasaki, Takahashi, Ohkawa, Taguchi, Une (bib0965) 1994; 29
Hlaváč, Hlaváčová, Jandačka, Zegzulka, Viliamsová, Vašek (bib0470) 2010; 95
Yuvaraj, Pradeep kumar, Lenin Raj, Rajadurai (bib0775) 2019; 6
Wang, Yang (bib0025) 2008; 265
2019 (accessed 11 August 2019).
Arola, Hall (bib0900) 2005; 8
Ebeid, Atia, Sayed (bib0705) 2014; 3
Hutchings (bib0040) 1979
Srinivasu, Axinte, Shipway, Folkes (bib0290) 2009; 49
Lebar, Cvjeticanin, Orbanic, Junkar (bib0805) 2011
Patel (bib0395) 2004; 44
Muju, Pathak (bib0245) 1988; 17
Manu, Ramesh Babu (bib0240) 2008; 3
Schwieger, Carrero, Rentzsch, Becker, Bishop, Hille (bib0955) 2004; 71
Kim, Lee, Lee, Song (bib0510) 2009; 7
Karakurt, Aydin, Aydiner (bib0205) 2010; 13
Syazwani, Mebrahitom, Azmir (bib0450) 2016
Seo, Ramulu, Kim (bib0855) 2003; 217
Perec (bib1130) 2016; 149
Powell (bib0385) 2007
Hloch, Hlaváček, Vasilko, Cárach, Samardžić, Kozak (bib0695) 2014; 53
Temucin, Tozan, Vayvay, Harnicarova, Valicek (bib0980) 2014; 70
Duspara, Starčević, Samardžić, Horvat (bib1120) 2017; 11
Chakravarthy, Babu (bib0995) 2000; 214
Kong, Srinivasu, Axinte, Voice, McGourlay, Hon (bib0840) 2013; 62
Ramprasad, Kamal (bib1015) 2015; 5
Chacko, Gupta (bib0460) 2003
Kong, Axinte (bib0780) 2009; 223
Thamizhvalavan, Arivazhagan, Yuvaraj, Ramesh (bib1125) 2019; 34
Wang, Shanmugam (bib0500) 2009; 81
Une, Uchino, Horie, Sato, Ogasawara, Kakita (bib0960) 1989; 23
Papachristou, Barters (bib0950) 1982; 69
Kechagias, Petropoulos, Vaxevanidis (bib1110) 2012; 62
Kovacevic (bib0220) 1991; 10
Reddy, Kumar, Rao (bib1100) 2014; 2
Yuvaraj, Kumar (bib1035) 2015; 30
Shipway, Fowler, Pashby (bib0390) 2005; 258
Nair, Kumanan (bib1115) 2017; 32
Uhlář, Hlaváč, Gembalova, Jonšta, Zuchnický (bib0525) 2013; 308
Hlavác (bib0415) 1998
Yuvaraj, Pavithra, Shamli (bib0580) 2019; 48
Elmabrok, Badi (bib1090) 2017; 1
Sivapirakasam, Mathew, Surianarayanan (bib0985) 2011; 38
Kulekci (bib0085) 2002; 42
Liu (bib0755) 2017; 1
Folkes (bib0005) 2009; 209
Yuvaraj, Pradeep Kumar (bib0770) 2019; 10
Jerman, Orbanic, Etxeberria, Suarez, Junkar, Lebar (bib0785) 2011
Patel, Tandon (bib0540) 2017; 89
Arola, Ramulu (bib0020) 1997; 210
Hloch, Valíček (bib0815) 2012; 59
Kanthababu, Ram, Emannuel, Gokul, Rammohan (bib0585) 2016; 44
Karakurt, Aydin, Aydiner (bib0455) 2012; 27
Precision and Quality. Waterjet University
Gupta, Ramkumar, Tandon, Vyas (bib0725) 2013; 10
Hlavac, Hlavacova, Vasek (bib0425) 2007; 1
Ansari, Hashish (bib0655) 1995; 117
Escobar-Palafox, Gault, Ridgway (bib0650) 2012; 1
Parthiban, Sathish, Chandrasekaran (bib1060) 2017; 10
Bitter (bib0045) 1963; 6
Santhanakumar, Adalarasan, Rajmohan (bib1105) 2016; 30
Chen, Siores, Patel, Momber (bib0140) 2002; 42
Vasek, Martinec, Foldyna (bib0070) 1993
Park, Kim, Ahn (bib0720) 2016; 25
Momber, Kovacevic (bib0015) 1998
Yuvaraj, Kumar (bib0550) 2016
Savrun, Taya (bib0845) 1988; 23
Kulekci (bib0225) 2002; 42
Kovacevic, Mohan, Beardsley (bib0795) 1996; 118
Kanthababu, Chetty (bib0475) 2003; 254
Karakurt, Aydin, Aydiner (bib0410) 2011; 18
Cashman, Ramirez, Soo, Shepherd, Rabani (bib0880) 2013
Selvan, Raju, Sachidananda (bib0275) 2012; 7
Madhu, Chaudhary, Kumar (bib1050) 2017; 6
Hashish (bib0660) 2001
Azmir, Ahsan, Rahmah, Noor, Aziz (bib0375) 2007
Aich, Banerjee, Bandyopadhyay, Das (bib0090) 2014; 7
Ay, Çaydaş, Hasçalik (bib0830) 2010; 25
Miranda, Quintino (bib0835) 2005; 54
Satyanarayana, Srikar (bib1020) 2014; 2
Deepak, Anjaiah, Shetty (bib0155) 2017
Zhang, Nambiath, Galecki, Summers, Bowden (bib0735) 2005
Naresh Babu, Muthukrishnan (bib1070) 2015; 38
Akkurt (bib0875) 2015; 18
Naresh Babu, Muthukrishnan (bib0990) 2014; 29
Yuvaraj, Kumar (bib1040) 2018; 20
OMAX, USA
Srinivasu, Babu (bib0435) 2008; 8
Xu, Dunleavey, Antar, Hood, Soo, Kucukturk (bib0910) 2018; 111
Santhanakumar, Adalarasan, Rajmohan (bib1030) 2015; 40
Srinivas, Babu (bib0355) 2012; 16
Siores, Wong, Chen, Wager (bib0280) 1996; 45
Nanduri, Taggart, Kim (bib0250) 2002; 42
Wang, Kuriyagawa, Huang (bib0315) 2003; 7
Axinte, Srinivasu, Kong, Butler-Smith (bib0675) 2009; 49
Akkurt (bib0100) 2009; 30
Chen, Siores (bib0345) 2003; 135
Shanmugam, Nguyen, Wang (bib0480) 2008; 39
Saptaji, Gebremariam, Azhari (bib0940) 2018; 97
Zhong, Han (bib0665) 2002; 17
Ohadi, Ansari, Hashish (bib0800) 1992; 114
Kong, Axinte, Voice (bib0215) 2011; 211
Wang, Wong (bib0300) 1999; 39
Bitter (bib0050) 1963; 6
Boud, Loo, Kinnell (bib0130) 2014; 13
Kun-Bodnár, Maros (bib0125) 2011; 39
Boud, Murray, Loo, Clare, Kinnell (bib0135) 2014; 29
Feng, Huang, Wang, Zhu (bib0885) 2010; 431
Gudimetla, Wang, Wong (bib0405) 2002; 128
Liu, Cutler, Raghavan, Miles, Schubert, Webers (bib0575) 2018
Ramulu, Posinasetti, Hashish (bib0600) 2005
Zohourkari, Zohoor, Annoni (bib0635) 2014; 6
Arola, McCain (bib0750) 2000; 53
Liu, Gnäupel-Herold, Hovanski, Dahl (bib0925) 2009
(accessed 01 September 2019).
Hreha, Radvanska, Carach, Lehocka, Monkova, Krolczyk (bib0180) 2014; 53
Akkurt, Kulekci, Seker, Ercan (bib0110) 2004; 147
Deepak, Akash, Anjaiah (bib0150) 2015; 4
Shakouri, Abbasi (bib0945) 2018; 232
Liu, Huang, Wang, Zhu, Yao, Liu (bib1010) 2014; 40
Khan, Haque (bib0210) 2007; 191
Orbanic, Junkar (bib0870) 2008; 265
Azmir, Ahsan (bib0360) 2009; 209
Hovanski, Dahl, Williford (bib0920) 2009
Liu (bib0615) 2007; 32
Selvan (bib0270) 2012; 1
Gupta, Pandey, Garg, Khanna, Batra (bib1075) 2014; 6
McGeough (bib0505) 2016; 42
Hlaváč, Strnadel, Kaličinský, Gembalová (bib0935) 2012; 62
Wang, Hou, Lv (bib0565) 2017
Hreha, Radvanska, Carach, Lehocka, Monkova, Krolczyk (bib0445) 2014; 53
Axinte, Kong (bib0465) 2009; 58
Putz, Dix, Morczinek, Dittrich (bib0010) 2018; 77
Fowler, Pashby, Shipway (bib0160) 2009; 266
Liu, Schubert (bib0760) 2012
Aultrin, Anand (bib1080) 2014; 2
Khakpour, Birglenl, Tahan, Paquet (bib0645) 2014; 22
Hlaváč (bib0175) 2009; 209
Lemma, Chen, Siores, Wang (bib0235) 2002; 42
Zhao, Guo (bib0320) 2014; 73
Waterjetting 11c - Mixing abrasive with a water jet
Tsunemoto, Kazuhiro, Katsuo (bib0520) 2000; 2
Kumar, Chattopadhyaya, Dixit, Bora, Zelenak, Foldyna (bib0620) 2017; 88
Kohorst, Tegtmeyer, Biskup, Bach, Stiesch (bib0970) 2014; 24
Yuvaraj, Kumar (bib0400) 2017; 32
Duarte, Infante, De-Freitas (bib0915) 2014; 891–892
Niranjan, Srinivas, Ramachandra (bib0905) 2019
Boud, Carpenter, Folkes, Shipway (bib0825) 2010; 210
Industrial Automation (bib1145)
Wang (bib0310) 2009; 404
Rivero, Alberdi, Artaza, Mendia, Lamikiz (bib0640) 2018; 94
Hashish (bib0975) 1991; 113
Louis, Pude, Rad Ch, Versemann (bib1135) 2007; 51
Pandey, Pal, Katiyar (bib0740) 2012; 4
Kalyanasundaram, Shehata, Neumann, Shrotriya, Molian (bib0485) 2008; 20
Perzel, Flimel, Krolczyk, Sedmak, Ruggiero, Kozak (bib0790) 2017; 21
Brillová, Ohlídal, Valíček, Hloch, Kozak, Ivandić (bib0810) 2012; 51
Yuvaraj, Pradeep Kumar (bib0065) 2017; 21
Valicek, Hloch (bib0865) 2009; 3
Niranjan, Srinivas, Ramachandra (bib0350) 2018; 6
Huang, Hou, Wang, Feng (bib0185) 2006; 304
Patel, Tandon (bib0535) 2015; 10
Kunaporn, Chillman, Ramulu, Hashish (bib0230) 2008; 265
Finnie (bib0330) 1960; 3
Iqbal, Dar, Hussain (bib0365) 2011; 26
Hashish (bib0035) 1998; 28
Zhao, Guo (bib0820) 2014; 73
Srikanth, Rao (bib1095) 2014; 8
Kolahan, Khajavi (bib1055) 2009; 3
Hou, Wang, Lv, Liu (bib0570) 2018
Chen, Siores, Wong (bib0145) 1998; 74
Yuvaraj, Kumar (bib0545) 2016; 362
Jerman, Orbanić, Junkar, Lebar (bib0495) 2015; 7
Lenin Raj, Rajadurai (bib0605) 2019; 6
Mohd Ali, Khan, Ali (bib0890) 2011; 264
Hascalik, Çaydaş, Gürün (bib0170) 2007; 28
Momber, Eusch, Kovacevic (bib0860) 1996; 31
Caydas, Hascalik (bib1000) 2008; 202
Meng, Ludema (bib0030) 1995; 181
Selvan, Raju (bib0265) 2012; 1
Zain, Haron, Sharif (bib1005) 2011; 11
Sharma, Chattopadhyaya, Hloch (bib1025) 2011; 56
Arola, McCain, Kunaporn, Ramulu (bib0120) 2001; 249
Uhlmann, Flögel, Kretzschmar, Faltin (bib0670) 2012; 1
Naresh Babu, Muthukrishnan (bib0380) 2014; 29
Che, Huang, Wang, Zhu (bib0060) 2011; 487
Lv, Hou, Tian, Huang, Zhu (bib0560) 2018; 96
Pal, Tandon (bib0590) 2013; 66
Hlavac, Martinec (bib0420) 1998
Srivastava, Nag, Dixit, Tiwari, Scucka, Zelenak (bib0690) 2017; 28
Muruganandhan, Mugilvalavan, Thirumavalavan, Yuvaraj (bib1065) 2018; 34
Holmberg, Berglund, Wretland, Beno (bib0930) 2019; 100
Wang (bib0305) 2007; 49
Pal, Choudhury (bib0255) 2014; 5
Zhu, Huang, Wang, Li, Che (bib0745) 2009; 49
Sheldon, Finnie (bib0055) 1966; 88
Kartal, Gökkaya, Nalbant (bib0680) 2012
Kumar, Shukla (bib0370) 2012; 236
Radovanović (bib1085) 2016; 38
Thomas (bib0895) 2009; 11
Junkar, Jurisevic, Fajdiga, Grah (bib0335) 2006; 32
Ramulu, Raju, Inoue, Zeng (bib0850) 1993; 166
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0065) 2017; 21
10.1016/j.jmapro.2019.11.030_bib0075
Industrial Automation (10.1016/j.jmapro.2019.11.030_bib1145)
Caydas (10.1016/j.jmapro.2019.11.030_bib1000) 2008; 202
Liu (10.1016/j.jmapro.2019.11.030_bib1010) 2014; 40
Elmabrok (10.1016/j.jmapro.2019.11.030_bib1090) 2017; 1
Karakurt (10.1016/j.jmapro.2019.11.030_bib0455) 2012; 27
Kechagias (10.1016/j.jmapro.2019.11.030_bib1110) 2012; 62
Akkurt (10.1016/j.jmapro.2019.11.030_bib0875) 2015; 18
Ansari (10.1016/j.jmapro.2019.11.030_bib0655) 1995; 117
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0550) 2016
Shipway (10.1016/j.jmapro.2019.11.030_bib0390) 2005; 258
Reddy (10.1016/j.jmapro.2019.11.030_bib1100) 2014; 2
Kunaporn (10.1016/j.jmapro.2019.11.030_bib0230) 2008; 265
Hashish (10.1016/j.jmapro.2019.11.030_bib0975) 1991; 113
Manu (10.1016/j.jmapro.2019.11.030_bib0240) 2008; 3
Hreha (10.1016/j.jmapro.2019.11.030_bib0445) 2014; 53
Fowler (10.1016/j.jmapro.2019.11.030_bib0160) 2009; 266
Arola (10.1016/j.jmapro.2019.11.030_bib0120) 2001; 249
Selvan (10.1016/j.jmapro.2019.11.030_bib0270) 2012; 1
Akkurt (10.1016/j.jmapro.2019.11.030_bib0100) 2009; 30
Gupta (10.1016/j.jmapro.2019.11.030_bib1075) 2014; 6
Wang (10.1016/j.jmapro.2019.11.030_bib0025) 2008; 265
Wang (10.1016/j.jmapro.2019.11.030_bib0565) 2017
Savrun (10.1016/j.jmapro.2019.11.030_bib0845) 1988; 23
Saptaji (10.1016/j.jmapro.2019.11.030_bib0940) 2018; 97
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib1035) 2015; 30
Hlaváč (10.1016/j.jmapro.2019.11.030_bib0175) 2009; 209
Cashman (10.1016/j.jmapro.2019.11.030_bib0880) 2013
10.1016/j.jmapro.2019.11.030_bib0095
Chen (10.1016/j.jmapro.2019.11.030_bib0345) 2003; 135
Duspara (10.1016/j.jmapro.2019.11.030_bib1120) 2017; 11
Kovacevic (10.1016/j.jmapro.2019.11.030_bib0795) 1996; 118
Jegaraj (10.1016/j.jmapro.2019.11.030_bib0195) 2007; 185
Muju (10.1016/j.jmapro.2019.11.030_bib0245) 1988; 17
Junkar (10.1016/j.jmapro.2019.11.030_bib0335) 2006; 32
Feng (10.1016/j.jmapro.2019.11.030_bib0885) 2010; 431
Hlaváč (10.1016/j.jmapro.2019.11.030_bib0430) 2015; 77
Khan (10.1016/j.jmapro.2019.11.030_bib0210) 2007; 191
Srinivasu (10.1016/j.jmapro.2019.11.030_bib0290) 2009; 49
Chakravarthy (10.1016/j.jmapro.2019.11.030_bib0995) 2000; 214
Kalyanasundaram (10.1016/j.jmapro.2019.11.030_bib0485) 2008; 20
Hashish (10.1016/j.jmapro.2019.11.030_bib0660) 2001
Kohorst (10.1016/j.jmapro.2019.11.030_bib0970) 2014; 24
Manu (10.1016/j.jmapro.2019.11.030_bib0340) 2009; 266
Boud (10.1016/j.jmapro.2019.11.030_bib0825) 2010; 210
Schwieger (10.1016/j.jmapro.2019.11.030_bib0955) 2004; 71
Hloch (10.1016/j.jmapro.2019.11.030_bib0695) 2014; 53
Ramprasad (10.1016/j.jmapro.2019.11.030_bib1015) 2015; 5
Zeng (10.1016/j.jmapro.2019.11.030_bib0080) 1992
Nair (10.1016/j.jmapro.2019.11.030_bib1115) 2017; 32
Deepak (10.1016/j.jmapro.2019.11.030_bib0155) 2017
Momber (10.1016/j.jmapro.2019.11.030_bib0015) 1998
Lebar (10.1016/j.jmapro.2019.11.030_bib0805) 2011
Khakpour (10.1016/j.jmapro.2019.11.030_bib0645) 2014; 22
Perzel (10.1016/j.jmapro.2019.11.030_bib0790) 2017; 21
Putz (10.1016/j.jmapro.2019.11.030_bib0010) 2018; 77
Shanmugam (10.1016/j.jmapro.2019.11.030_bib0480) 2008; 39
Azmir (10.1016/j.jmapro.2019.11.030_bib0375) 2007
Karakurt (10.1016/j.jmapro.2019.11.030_bib0205) 2010; 13
Kong (10.1016/j.jmapro.2019.11.030_bib0780) 2009; 223
Miranda (10.1016/j.jmapro.2019.11.030_bib0835) 2005; 54
Hlaváč (10.1016/j.jmapro.2019.11.030_bib0470) 2010; 95
Dadkhahipour (10.1016/j.jmapro.2019.11.030_bib0715) 2011; 325
Valicek (10.1016/j.jmapro.2019.11.030_bib0865) 2009; 3
Zhu (10.1016/j.jmapro.2019.11.030_bib0745) 2009; 49
Siores (10.1016/j.jmapro.2019.11.030_bib0280) 1996; 45
Lenin Raj (10.1016/j.jmapro.2019.11.030_bib0605) 2019; 6
Azmir (10.1016/j.jmapro.2019.11.030_bib0360) 2009; 209
Iqbal (10.1016/j.jmapro.2019.11.030_bib0365) 2011; 26
Hlaváč (10.1016/j.jmapro.2019.11.030_bib0935) 2012; 62
Wang (10.1016/j.jmapro.2019.11.030_bib0315) 2003; 7
Boud (10.1016/j.jmapro.2019.11.030_bib0135) 2014; 29
Arola (10.1016/j.jmapro.2019.11.030_bib0020) 1997; 210
Patel (10.1016/j.jmapro.2019.11.030_bib0395) 2004; 44
Patel (10.1016/j.jmapro.2019.11.030_bib0540) 2017; 89
Radovanović (10.1016/j.jmapro.2019.11.030_bib1085) 2016; 38
Srinivas (10.1016/j.jmapro.2019.11.030_bib0355) 2012; 16
Bach (10.1016/j.jmapro.2019.11.030_bib0515) 2010
Jurkovic (10.1016/j.jmapro.2019.11.030_bib1045) 2012; 16
Lv (10.1016/j.jmapro.2019.11.030_bib0560) 2018; 96
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0400) 2017; 32
Naresh Babu (10.1016/j.jmapro.2019.11.030_bib1070) 2015; 38
Escobar-Palafox (10.1016/j.jmapro.2019.11.030_bib0650) 2012; 1
Ebeid (10.1016/j.jmapro.2019.11.030_bib0705) 2014; 3
Naresh Babu (10.1016/j.jmapro.2019.11.030_bib0990) 2014; 29
10.1016/j.jmapro.2019.11.030_bib1140
Axinte (10.1016/j.jmapro.2019.11.030_bib0465) 2009; 58
Muruganandhan (10.1016/j.jmapro.2019.11.030_bib1065) 2018; 34
Meng (10.1016/j.jmapro.2019.11.030_bib0030) 1995; 181
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0775) 2019; 6
Hlavac (10.1016/j.jmapro.2019.11.030_bib0425) 2007; 1
Haghbin (10.1016/j.jmapro.2019.11.030_bib0555) 2018; 35
Wang (10.1016/j.jmapro.2019.11.030_bib0300) 1999; 39
Lv (10.1016/j.jmapro.2019.11.030_bib0530) 2015; 78
Powell (10.1016/j.jmapro.2019.11.030_bib0385) 2007
Orbanic (10.1016/j.jmapro.2019.11.030_bib0595) 2004; 218
Liu (10.1016/j.jmapro.2019.11.030_bib0575) 2018
Srinivas (10.1016/j.jmapro.2019.11.030_bib0285) 2011; 1
Hloch (10.1016/j.jmapro.2019.11.030_bib0815) 2012; 59
Ohadi (10.1016/j.jmapro.2019.11.030_bib0800) 1992; 114
Akkurt (10.1016/j.jmapro.2019.11.030_bib0105) 2010; 19
Park (10.1016/j.jmapro.2019.11.030_bib0720) 2016; 25
Pandey (10.1016/j.jmapro.2019.11.030_bib0740) 2012; 4
Niranjan (10.1016/j.jmapro.2019.11.030_bib0905) 2019
Kun-Bodnár (10.1016/j.jmapro.2019.11.030_bib0125) 2011; 39
Hutchings (10.1016/j.jmapro.2019.11.030_bib0040) 1979
Nanduri (10.1016/j.jmapro.2019.11.030_bib0250) 2002; 42
Jegaraj (10.1016/j.jmapro.2019.11.030_bib0190) 2005; 45
Finnie (10.1016/j.jmapro.2019.11.030_bib0330) 1960; 3
Zhao (10.1016/j.jmapro.2019.11.030_bib0820) 2014; 73
Syazwani (10.1016/j.jmapro.2019.11.030_bib0450) 2016
Une (10.1016/j.jmapro.2019.11.030_bib0960) 1989; 23
Hascalik (10.1016/j.jmapro.2019.11.030_bib0170) 2007; 28
Liu (10.1016/j.jmapro.2019.11.030_bib0925) 2009
Uhlář (10.1016/j.jmapro.2019.11.030_bib0525) 2013; 308
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0545) 2016; 362
Hou (10.1016/j.jmapro.2019.11.030_bib0570) 2018
Liu (10.1016/j.jmapro.2019.11.030_bib0615) 2007; 32
Ay (10.1016/j.jmapro.2019.11.030_bib0830) 2010; 25
Bitter (10.1016/j.jmapro.2019.11.030_bib0050) 1963; 6
Pal (10.1016/j.jmapro.2019.11.030_bib0255) 2014; 5
Zhang (10.1016/j.jmapro.2019.11.030_bib0730) 2011; 9
Thamizhvalavan (10.1016/j.jmapro.2019.11.030_bib1125) 2019; 34
Kong (10.1016/j.jmapro.2019.11.030_bib0215) 2011; 211
Kumar (10.1016/j.jmapro.2019.11.030_bib0370) 2012; 236
Papachristou (10.1016/j.jmapro.2019.11.030_bib0950) 1982; 69
Hashish (10.1016/j.jmapro.2019.11.030_bib0610) 2009
Ramulu (10.1016/j.jmapro.2019.11.030_bib0850) 1993; 166
Satyanarayana (10.1016/j.jmapro.2019.11.030_bib1020) 2014; 2
Arola (10.1016/j.jmapro.2019.11.030_bib0900) 2005; 8
Bitter (10.1016/j.jmapro.2019.11.030_bib0045) 1963; 6
Deepak (10.1016/j.jmapro.2019.11.030_bib0150) 2015; 4
Wang (10.1016/j.jmapro.2019.11.030_bib0305) 2007; 49
Liu (10.1016/j.jmapro.2019.11.030_bib0765) 2011; 4
Srikanth (10.1016/j.jmapro.2019.11.030_bib1095) 2014; 8
Hashish (10.1016/j.jmapro.2019.11.030_bib0035) 1998; 28
Fowler (10.1016/j.jmapro.2019.11.030_bib0165) 2005; 159
Thomas (10.1016/j.jmapro.2019.11.030_bib0895) 2009; 11
Hlavac (10.1016/j.jmapro.2019.11.030_bib0420) 1998
Gudimetla (10.1016/j.jmapro.2019.11.030_bib0405) 2002; 128
Kulekci (10.1016/j.jmapro.2019.11.030_bib0225) 2002; 42
Palleda (10.1016/j.jmapro.2019.11.030_bib0260) 2007; 189
Chacko (10.1016/j.jmapro.2019.11.030_bib0460) 2003
Ramulu (10.1016/j.jmapro.2019.11.030_bib0600) 2005
Shakouri (10.1016/j.jmapro.2019.11.030_bib0945) 2018; 232
Kanthababu (10.1016/j.jmapro.2019.11.030_bib0475) 2003; 254
McGeough (10.1016/j.jmapro.2019.11.030_bib0505) 2016; 42
Temucin (10.1016/j.jmapro.2019.11.030_bib0980) 2014; 70
Kumar (10.1016/j.jmapro.2019.11.030_bib0620) 2017; 88
Rivero (10.1016/j.jmapro.2019.11.030_bib0640) 2018; 94
Hlavác (10.1016/j.jmapro.2019.11.030_bib0415) 1998
Kartal (10.1016/j.jmapro.2019.11.030_bib0680) 2012
Hreha (10.1016/j.jmapro.2019.11.030_bib0180) 2014; 53
Aultrin (10.1016/j.jmapro.2019.11.030_bib1080) 2014; 2
Srivastava (10.1016/j.jmapro.2019.11.030_bib0690) 2017; 28
Akkurt (10.1016/j.jmapro.2019.11.030_bib0110) 2004; 147
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0770) 2019; 10
Boud (10.1016/j.jmapro.2019.11.030_bib0130) 2014; 13
Jerman (10.1016/j.jmapro.2019.11.030_bib0495) 2015; 7
Li (10.1016/j.jmapro.2019.11.030_bib0700) 2012; 697
Sharma (10.1016/j.jmapro.2019.11.030_bib0115) 2013
Wang (10.1016/j.jmapro.2019.11.030_bib0310) 2009; 404
Srinivasu (10.1016/j.jmapro.2019.11.030_bib0435) 2008; 8
Santhanakumar (10.1016/j.jmapro.2019.11.030_bib1105) 2016; 30
Zhao (10.1016/j.jmapro.2019.11.030_bib0320) 2014; 73
Kartal (10.1016/j.jmapro.2019.11.030_bib0685) 2014; 29
Perec (10.1016/j.jmapro.2019.11.030_bib1130) 2016; 149
Chen (10.1016/j.jmapro.2019.11.030_bib0140) 2002; 42
Arola (10.1016/j.jmapro.2019.11.030_bib0750) 2000; 53
Lemma (10.1016/j.jmapro.2019.11.030_bib0235) 2002; 42
Uhlmann (10.1016/j.jmapro.2019.11.030_bib0670) 2012; 1
Hovanski (10.1016/j.jmapro.2019.11.030_bib0920) 2009
Sharma (10.1016/j.jmapro.2019.11.030_bib1025) 2011; 56
Kim (10.1016/j.jmapro.2019.11.030_bib0510) 2009; 7
Zhang (10.1016/j.jmapro.2019.11.030_bib0735) 2005
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib1040) 2018; 20
Xu (10.1016/j.jmapro.2019.11.030_bib0910) 2018; 111
Kanthababu (10.1016/j.jmapro.2019.11.030_bib0585) 2016; 44
Yuvaraj (10.1016/j.jmapro.2019.11.030_bib0325) 2017; 32
Kovacevic (10.1016/j.jmapro.2019.11.030_bib0220) 1991; 10
Kolahan (10.1016/j.jmapro.2019.11.030_bib1055) 2009; 3
Selvan (10.1016/j.jmapro.2019.11.030_bib0265) 2012; 1
Sheldon (10.1016/j.jmapro.2019.11.030_bib0055) 1966; 88
Zain (10.1016/j.jmapro.2019.11.030_bib1005) 2011; 11
Arola (10.1016/j.jmapro.2019.11.030_bib0630) 2006; 10
Karakurt (10.1016/j.jmapro.2019.11.030_b
References_xml – volume: 18
  start-page: 435
  year: 2011
  end-page: 442
  ident: bib0410
  article-title: Analysis of the kerf angle of the granite machined by abrasive waterjet
  publication-title: Indian J Eng Mater Sci
– year: 2019
  ident: bib0905
  article-title: Abrasive water jet cutting: a risk-free technology for machining Mg-Based materials
  publication-title: IntechOpen
– volume: 265
  start-page: 176
  year: 2008
  end-page: 185
  ident: bib0230
  article-title: Effect of waterjet formation on surface preparation and profiling of aluminum alloy
  publication-title: Wear
– volume: 44
  start-page: 133
  year: 2016
  end-page: 138
  ident: bib0585
  article-title: Experimental investigations on pocket milling of titanium alloy using abrasive water jet machining
  publication-title: FME Transactions
– volume: 118
  start-page: 555
  year: 1996
  end-page: 563
  ident: bib0795
  article-title: Monitoring of thermal energy distribution in abrasive waterjet cutting using infrared thermography
  publication-title: J Manuf Sci Eng
– volume: 34
  start-page: 330
  year: 2018
  end-page: 340
  ident: bib1065
  article-title: Investigation of water jet peening process parameters on AL6061-T6
  publication-title: Surf Eng
– volume: 38
  start-page: 692
  year: 2015
  end-page: 700
  ident: bib1070
  article-title: Investigation of multiple process parameters in abrasive water jet machining of tiles
  publication-title: J Chin Inst Eng
– volume: 1
  start-page: 404
  year: 2012
  end-page: 408
  ident: bib0650
  article-title: Characterisation of abrasive water-jet process for pocket milling in Inconel 718
  publication-title: Procedia Cirp
– volume: 325
  start-page: 621
  year: 2011
  end-page: 626
  ident: bib0715
  article-title: A study of material removal process in abrasive waterjet milling
  publication-title: Adv Mater Res
– reference: Precision and Quality. Waterjet University,
– start-page: 25
  year: 1998
  end-page: 38
  ident: bib0415
  article-title: BHR group conference series publication and the Mechanical Engineering publications limited, JETCUT-software for prediction of high-energy waterjet efficiency
– volume: 53
  start-page: 537
  year: 2014
  end-page: 540
  ident: bib0695
  article-title: Abrasive waterjet (AWJ) titanium tangential turning evaluation
  publication-title: Metal
– start-page: 333
  year: 2013
  end-page: 341
  ident: bib0115
  publication-title: Proc. to Conference on Intelligent Robot, Automation and Manufacturing, Experimental Investigation of Process Parameters Influence on Surface Roughness in Abrasive Water Jet Machining of AISI H13 Die Steel
– volume: 32
  start-page: 942
  year: 2007
  end-page: 957
  ident: bib0615
  article-title: Hole drilling with abrasive fluidjets
  publication-title: Int J Adv Manuf Technol
– year: 2005
  ident: bib0735
  article-title: American Waterjet conference, Accurate hole drilling using an abrasive water jet in titanium
– volume: 9
  start-page: 47
  year: 2011
  end-page: 65
  ident: bib0730
  article-title: Hole-drilling using abrasive water jet in titanium
  publication-title: Int J Mach Mach Mater
– volume: 56
  start-page: 1019
  year: 2011
  end-page: 1025
  ident: bib1025
  article-title: Multi response optimization of process parameters based on Taguchi—fuzzy model for coal cutting by water jet technology
  publication-title: Int J Adv Manuf Technol
– volume: 3
  start-page: 1425
  year: 2009
  end-page: 1430
  ident: bib1055
  article-title: Modeling and optimization of abrasive waterjet parameters using regression analysis
  publication-title: International Scholarly and Scientific Research & Innovation
– volume: 28
  start-page: 159
  year: 1998
  end-page: 169
  ident: bib0035
  article-title: Visualization of the abrasive-waterjet cutting process
  publication-title: Exp Mech
– volume: 42
  start-page: 1385
  year: 2002
  end-page: 1390
  ident: bib0140
  article-title: Minimising particle contamination at abrasive waterjet machined surfaces by a nozzle oscillation technique
  publication-title: Int J Mach Tools Manuf
– volume: 265
  start-page: 821
  year: 2008
  end-page: 830
  ident: bib0870
  article-title: Analysis of striation formation mechanism in abrasive water jet cutting
  publication-title: Wear
– volume: 21
  year: 2017
  ident: bib0790
  article-title: Measurement of thermal emission during cutting of materials using abrasive water jet
  publication-title: Therm Sci
– volume: 70
  start-page: 2275
  year: 2014
  end-page: 2282
  ident: bib0980
  article-title: A fuzzy based decision model for nontraditional machining process selection
  publication-title: Int J J Adv Manuf Technol
– volume: 25
  start-page: 1160
  year: 2010
  end-page: 1165
  ident: bib0830
  article-title: Effect of traverse speed on abrasive waterjet machining of age hardened Inconel 718 nickel-based superalloy
  publication-title: Mater Manuf Processes
– volume: 49
  start-page: 134
  year: 2009
  end-page: 141
  ident: bib0625
  article-title: Abrasive waterjet peening with elastic prestress: a parametric evaluation
  publication-title: Int J Mach Tools Manuf
– volume: 1
  start-page: 52
  year: 2012
  end-page: 59
  ident: bib0270
  article-title: Abrasive waterjet cutting surfaces of ceramics-an experimental investigation
  publication-title: Int J Adv Sci Eng Technol Res
– volume: 40
  start-page: 7899
  year: 2014
  end-page: 7908
  ident: bib1010
  article-title: Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–behnken design
  publication-title: Ceram Int
– volume: 128
  start-page: 123
  year: 2002
  end-page: 129
  ident: bib0405
  article-title: Kerf formation analysis in the abrasive waterjet cutting of industrial ceramics
  publication-title: J Mater Process Technol
– volume: 11
  start-page: 143
  year: 2017
  end-page: 149
  ident: bib1120
  article-title: Optimization of abrasive waterjet machining process parameters
  publication-title: Tehnički glasnik
– volume: 51
  start-page: 11
  year: 2007
  end-page: 16
  ident: bib1135
  article-title: Abrasive water suspension jet technology fundamentals, application and developments
  publication-title: Weld World
– volume: 1
  start-page: 73
  year: 2007
  end-page: 84
  ident: bib0425
  article-title: Milling of materials by water jets—acting of liquid jet in the cutting head
  publication-title: Trans VŠB—Tech UnivOstravMechSer
– volume: 29
  start-page: 532
  year: 2006
  ident: bib0200
  article-title: A study on the use of single mesh size abrasives in abrasive waterjet machining
  publication-title: Int J Adv Manuf Technol
– volume: 404
  start-page: 33
  year: 2009
  end-page: 44
  ident: bib0310
  article-title: A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation
  publication-title: Key Eng Mater
– volume: 10
  start-page: 202
  year: 2019
  end-page: 231
  ident: bib0770
  publication-title: Performance and surface evaluation characteristics on cryogenic assisted abrasive Water jet machining of AISI D2 steel Non-conventional machining in modern manufacturing systems IGI global publications
– volume: 62
  start-page: 157
  year: 2012
  end-page: 166
  ident: bib0935
  article-title: The model of product distortion in AWJ cutting
  publication-title: Int J Adv Manuf Technol
– volume: 6
  start-page: 169
  year: 1963
  end-page: 190
  ident: bib0050
  article-title: A study of erosion phenomena: part II
  publication-title: Wear
– volume: 35
  start-page: 307
  year: 2018
  end-page: 316
  ident: bib0555
  article-title: Masked micro-channel machining in aluminium alloy and borosilicate glass using abrasive waterjet micro-machining
  publication-title: J Manuf Process
– volume: 89
  start-page: 1193
  year: 2017
  end-page: 1208
  ident: bib0540
  article-title: Experimental investigations of gelatin-enabled abrasive water slurry jet machining
  publication-title: Int J Adv Manuf Technol
– year: 2011
  ident: bib0805
  article-title: WJTA american waterjet conference. Methods for AWJ cutting process control
– volume: 211
  start-page: 959
  year: 2011
  end-page: 971
  ident: bib0215
  article-title: Challenges in using waterjet machining of NiTi shape memory alloys: an analysis of controlled-depth milling
  publication-title: J Mater Process Technol
– volume: 39
  start-page: 923
  year: 2008
  end-page: 929
  ident: bib0480
  article-title: A study of delamination on graphite/epoxy composites in abrasive waterjet machining
  publication-title: Compos Part A Appl Sci Manuf
– volume: 189
  start-page: 292
  year: 2007
  end-page: 295
  ident: bib0260
  article-title: A study of taper angles and material removal rates of drilled holes in the abrasive water jet machining process
  publication-title: J Mater Process Technol
– start-page: 1
  year: 2001
  end-page: 14
  ident: bib0660
  publication-title: WJTA American Waterjet Conf, Macro Characteristics of AWJ Turned Surfaces
– volume: 7
  start-page: 38
  year: 2014
  end-page: 59
  ident: bib0090
  article-title: Multi-objective optimisation of abrasive water jet machining responses by simulated annealing and particle swarm
  publication-title: Int J Mechatron Manuf Syst
– volume: 6
  start-page: 869
  year: 2017
  end-page: 874
  ident: bib1050
  article-title: Optimization of abrasive waterjet machining process parameters on aluminium AL-6061
  publication-title: Int J Sci Res
– volume: 185
  start-page: 217
  year: 2007
  end-page: 227
  ident: bib0195
  article-title: A soft computing approach for controlling the quality of cut with abrasive waterjet cutting system experiencing orifice and focusing tube wear
  publication-title: J Mater Processes Technol
– volume: 29
  start-page: 1422
  year: 2014
  end-page: 1428
  ident: bib0380
  article-title: Investigation on surface roughness in abrasive water-jet machining by the response surface method
  publication-title: Mater Manuf Processes
– volume: 431
  start-page: 261
  year: 2010
  end-page: 264
  ident: bib0885
  article-title: A study on the abrasive waterjet milling mechanisms of ceramic materials
  publication-title: Key Eng Mat
– volume: 94
  year: 2018
  ident: bib0640
  article-title: Surface properties and fatigue failure analysis of alloy 718 surfaces milled by abrasive and plain waterjet
  publication-title: Int J Adv Manuf Technol
– volume: 48
  year: 2019
  ident: bib0580
  article-title: Investigation of surface morphology and topography features on abrasive water jet milled surface pattern of SS 304
  publication-title: J Test Eval
– volume: 2
  start-page: 82
  year: 2014
  end-page: 87
  ident: bib1020
  article-title: Optimization of abrasive water jet machining process parameters using Taguchi Grey relational analysis
  publication-title: Int J Mech Prod Eng Res Dev
– start-page: 275
  year: 2010
  end-page: 283
  ident: bib0515
  publication-title: Proc. 20th International Conference on Water Jetting, In-Process Generation of Water Ice Particles for Cutting and Cleaning Purposes
– volume: 117
  start-page: 475
  year: 1995
  end-page: 484
  ident: bib0655
  article-title: Effect of abrasive waterjet parameters on volume removal trends in turning
  publication-title: J Inst Eng
– volume: 5
  start-page: 1584
  year: 2014
  end-page: 1592
  ident: bib0255
  article-title: Surface characterization and machining of blind pockets on Ti6Al4V by abrasive water jet machining
  publication-title: Procedia Mater Sci
– volume: 264
  start-page: 1015
  year: 2011
  end-page: 1020
  ident: bib0890
  article-title: Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel
  publication-title: Adv Mater Res
– volume: 214
  start-page: 781
  year: 2000
  end-page: 791
  ident: bib0995
  article-title: A hybrid approach for selection of optimal process parameters in abrasive water jet cutting
  publication-title: Proc Inst Mech Eng Part B: J Eng Manuf.
– volume: 74
  start-page: 251
  year: 1998
  end-page: 254
  ident: bib0145
  article-title: Optimising abrasive waterjet cutting of ceramic materials
  publication-title: J Mater Process Technol
– year: 1993
  ident: bib0070
  publication-title: Proc. 7th American Water Jet Conference, Water Jet Technology Association, Influence of Properties of Garnet on AWJ Cutting Process
– volume: 17
  start-page: 325
  year: 1988
  end-page: 332
  ident: bib0245
  article-title: Abrasive jet machining of glass at low temperature
  publication-title: J Mech Working Technol
– start-page: 211
  year: 1998
  end-page: 224
  ident: bib0420
  article-title: BHR group conference series publication and the Mechanical Engineering Publications Limited, Almandine garnets as abrasive material in high-energy waterjet-physical modelling of interaction, experiment, and prediction
– volume: 254
  start-page: 763
  year: 2003
  end-page: 773
  ident: bib0475
  article-title: A study on recycling of abrasives in abrasive water jet machining
  publication-title: Wear
– volume: 8
  start-page: 171
  year: 2005
  end-page: 192
  ident: bib0900
  article-title: Parametric effects on particle deposition in abrasive waterjet surface treatments
  publication-title: Mach Sci Technol
– year: 2018
  ident: bib0570
  article-title: Experimental study of the ultrasonic vibration-assisted abrasive waterjet micromachining the quartz glass
  publication-title: Adv Mater Sci Eng Int J
– volume: 362
  start-page: 18
  year: 2016
  end-page: 32
  ident: bib0545
  article-title: Cutting of aluminium alloy with abrasive water jet and cryogenic assisted abrasive water jet: a comparative study of the surface integrity approach
  publication-title: Wear
– volume: 487
  start-page: 327
  year: 2011
  end-page: 331
  ident: bib0060
  article-title: Study of abrasive water jet polishing technology
  publication-title: Key Eng Mater
– volume: 27
  start-page: 538
  year: 2012
  end-page: 544
  ident: bib0455
  article-title: An experimental study on the depth of cut of granite in abrasive waterjet cutting
  publication-title: Mater Manuf Processes
– volume: 30
  start-page: 882
  year: 2015
  end-page: 889
  ident: bib1035
  article-title: Multiresponse optimization of abrasive water jet cutting process parameters using TOPSIS approach
  publication-title: Mater Manuf Processes
– start-page: 236
  year: 2017
  end-page: 239
  ident: bib0155
  publication-title: 6th International Conference on Electronics, Computer and Manufacturing Engineering, Optimization of Process Parameters in Abrasive Water Jet Drilling of D2 Steel to Produce Minimum Surface Roughness Using Taguchi Approach
– volume: 49
  start-page: 306
  year: 2007
  end-page: 316
  ident: bib0305
  article-title: Predictive depth of jet penetration models for abrasive waterjet cutting of alumina ceramics
  publication-title: Int J Mech Sci
– volume: 42
  start-page: 615
  year: 2002
  end-page: 623
  ident: bib0250
  article-title: The effects of system and geometric parameters on abrasive water jet nozzle wear
  publication-title: Int J Mach Tools Manuf
– volume: 23
  start-page: S74
  year: 1989
  end-page: S77
  ident: bib0960
  article-title: Liver resection using a water jet
  publication-title: Cancer Chemother Pharmacol
– volume: 31
  start-page: 1733
  year: 2016
  end-page: 1739
  ident: bib0295
  article-title: Machinability of nickel-based superalloy by abrasive water jet machining
  publication-title: Mater Manuf Processes
– volume: 28
  start-page: 11
  year: 2017
  end-page: 20
  ident: bib0690
  article-title: Surface integrity in tangential turning of hybrid MMC A359/B
  publication-title: J Manuf Process
– volume: 32
  start-page: 151
  year: 2017
  end-page: 161
  ident: bib0400
  article-title: Investigation of process parameters influence in abrasive water jet cutting of D2 steel
  publication-title: Mater Manuf Process
– volume: 18
  start-page: 303
  year: 2015
  end-page: 308
  ident: bib0875
  article-title: The effect of cutting process on surface microstructure and hardness of pure and Al 6061 aluminium alloy
  publication-title: Int Res J Eng Sci Technol Innov
– year: 2013
  ident: bib0880
  publication-title: 2013 WJTA-IMCA Conference and Expo, Abrasive Water Jet Cutting (AWJC) of Co-Cr-Mo Alloy Investment Castings in the Medical Device Industry
– volume: 209
  start-page: 4154
  year: 2009
  end-page: 4161
  ident: bib0175
  article-title: Investigation of the abrasive water jet trajectory curvature inside the kerf
  publication-title: J Mater Process Technol
– volume: 11
  start-page: 97
  year: 2009
  end-page: 105
  ident: bib0895
  article-title: Characteristics of abrasive waterjet cut-edges and the affect on formability and fatigue performance of high strength steels
  publication-title: J Manuf Process
– volume: 29
  start-page: 1422
  year: 2014
  end-page: 1428
  ident: bib0990
  article-title: Investigation on surface roughness in abrasive water-jet machining by the response surface method
  publication-title: Mater Manuf Processes
– volume: 6
  year: 2014
  ident: bib0635
  article-title: Investigation of the effects of machining parameters on material removal rate in abrasive waterjet turning
  publication-title: Adv Mech Eng
– volume: 62
  start-page: 635
  year: 2012
  end-page: 643
  ident: bib1110
  article-title: Application of Taguchi design for quality characterization of abrasive water jet machining of TRIP sheet steels
  publication-title: Int J Adv Manuf Technol
– volume: 73
  start-page: 941
  year: 2014
  end-page: 947
  ident: bib0820
  article-title: Topography and microstructure of the cutting surface machined with abrasive waterjet
  publication-title: Int J Adv Manuf Technol
– volume: 39
  start-page: 855
  year: 1999
  end-page: 870
  ident: bib0300
  article-title: A study of abrasive waterjet cutting of metallic coated sheet steels
  publication-title: Int J Mach Tools Manuf
– volume: 2
  start-page: 99
  year: 2000
  end-page: 100
  ident: bib0520
  article-title: Studies of Micro ice jet machining
  publication-title: Japan Soc Mech Eng
– year: 2017
  ident: bib0565
  article-title: Experimental investigation on the material removal of the ultrasonic vibration assisted abrasive water jet machining ceramics
  publication-title: Adv Mater Sci Eng Int J
– volume: 249
  start-page: 943
  year: 2001
  end-page: 950
  ident: bib0120
  article-title: Waterjet and abrasive waterjet surface treatment of titanium: a comparison of surface texture and residual stress
  publication-title: Wear
– volume: 30
  start-page: 371
  year: 2016
  ident: bib1105
  article-title: Parameter design for cut surface characteristics in abrasive waterjet cutting of Al/SiC/Al
  publication-title: J Mech Sci Technol
– volume: 236
  start-page: 4600
  year: 2012
  end-page: 4610
  ident: bib0370
  article-title: Finite element analysis of multi-particle impact on erosion in abrasive water jet machining of titanium alloy
  publication-title: J Comput Appl Math
– volume: 42
  start-page: 1297
  year: 2002
  end-page: 1306
  ident: bib0225
  article-title: Processes and apparatus developments in industrial waterjet applications
  publication-title: Int J Mach Tools Manuf
– start-page: 65
  year: 2009
  end-page: 73
  ident: bib0610
  publication-title: Proc. ASME 2009 Pressure Vessels and Piping Division Conference, Abrasive-Waterjet Drilling of High Temperature Jet Engine Parts
– volume: 149
  start-page: 366
  year: 2016
  end-page: 373
  ident: bib1130
  article-title: Abrasive suspension water jet cutting optimization using orthogonal array design
  publication-title: Procedia Eng
– reference: ; 2019 (accessed 11 August 2019).
– volume: 66
  start-page: 877
  year: 2013
  end-page: 881
  ident: bib0590
  article-title: Identification of the role of machinability and milling depth on machining time in controlled depth milling using abrasive water jet
  publication-title: Int J Adv Manuf Technol
– volume: 54
  start-page: 370
  year: 2005
  end-page: 377
  ident: bib0835
  article-title: Microstructural study of material removal mechanisms observed in abrasive waterjet cutting of calcareous stones
  publication-title: Mater Charact
– volume: 2
  start-page: 19
  year: 2014
  end-page: 34
  ident: bib1080
  article-title: Optimization of machining parameters in AWJM process for an copper Iron alloy using RSM and regression analysis
  publication-title: Int J Emerging Eng Res Technol
– volume: 6
  start-page: 066532
  year: 2019
  ident: bib0605
  article-title: Experimental study on deep-hole making in Ti-6Al-4V by abrasive water jet machining
  publication-title: Mater Res Express
– volume: 10
  start-page: 348
  year: 2013
  end-page: 353
  ident: bib0725
  article-title: Role of process parameters on pocket milling with Abrasive Water Jet Machining technique
  publication-title: Int J Mech Mechatron Eng
– volume: 77
  start-page: 1811
  year: 2015
  end-page: 1818
  ident: bib0430
  article-title: Investigation of the taper of kerfs cut in steels by AWJ
  publication-title: Int J Adv Manuf Technol
– volume: 16
  start-page: 337
  year: 2012
  end-page: 354
  ident: bib0355
  article-title: Penetration ability of abrasive waterjets in cutting of aluminum-silicon carbide particulate metal matrix composites
  publication-title: Mach Sci Technol
– volume: 40
  start-page: 3299
  year: 2015
  end-page: 3311
  ident: bib1030
  article-title: Experimental modelling and analysis in abrasive waterjet cutting of ceramic tiles using grey-based response surface methodology
  publication-title: Arabian J Sci Eng
– volume: 88
  start-page: 393
  year: 1966
  end-page: 399
  ident: bib0055
  article-title: The mechanism of material removal in the erosive cutting of brittle materials
  publication-title: J Inst Eng
– volume: 39
  start-page: 211
  year: 2011
  end-page: 214
  ident: bib0125
  article-title: Cutting of aluminium alloy by abrasive waterjet
  publication-title: Hung J Ind Chem
– start-page: 483
  year: 1992
  end-page: 501
  ident: bib0080
  article-title: Development of an abrasive waterjet kerf cutting model for brittle materials
  publication-title: Jet Cutting Technology
– start-page: 67
  year: 2017
  end-page: 78
  ident: bib0490
  article-title: Ice jet machining: a sustainable variant of abrasive water jet machining
  publication-title: Sustainable Mach
– start-page: 568
  year: 2016
  end-page: 572
  ident: bib0550
  article-title: Experimental study of cryogenically enhanced abrasive Water jet cutting of AISI D2 steel
  publication-title: Proceedings of 6
– volume: 1
  start-page: 409
  year: 2012
  end-page: 413
  ident: bib0670
  article-title: Abrasive waterjet turning of high performance materials
  publication-title: Procedia Cirp
– volume: 28
  start-page: 1953
  year: 2007
  end-page: 1957
  ident: bib0170
  article-title: Effect of traverse speed on abrasive waterjet machining of Ti–6Al–4V alloy
  publication-title: Mater Des
– volume: 1
  start-page: 174
  year: 2012
  end-page: 182
  ident: bib0265
  article-title: Analysis of surface roughness in abrasive waterjet cutting of cast iron
  publication-title: Int J Sci Environ Technol
– volume: 49
  start-page: 797
  year: 2009
  end-page: 803
  ident: bib0675
  article-title: Abrasive waterjet cutting of polycrystalline diamond: a preliminary investigation
  publication-title: Int J Mach Tools Manuf
– volume: 218
  start-page: 503
  year: 2004
  end-page: 508
  ident: bib0595
  article-title: An experimental study of drilling small and deep blind holes with an abrasive water jet
  publication-title: Proc Inst Mech Eng Part B: J Eng Manuf
– reference: (accessed 01 September 2019).
– volume: 22
  year: 2014
  ident: bib0645
  article-title: Experimental study on abrasive waterjet polishing of hydraulic turbine blades
  publication-title: IOP Conf. Ser.: Earth Environ. Sci IOP Publishing
– volume: 891–892
  start-page: 1761
  year: 2014
  end-page: 1766
  ident: bib0915
  article-title: Influence of milling and abrasive water jet cutting on the fatigue behaviour of DP600 steel sheet
  publication-title: Adv Mater Res
– volume: 10
  start-page: 92
  year: 2015
  end-page: 101
  ident: bib0535
  article-title: Experimental investigations of thermally enhanced abrasive water jet machining of hard-to-machine metals
  publication-title: CIRP J Manuf Sci Technol
– volume: 7
  start-page: 439
  year: 2012
  end-page: 444
  ident: bib0275
  article-title: Effects of process parameters on surface roughness in abrasive waterjet cutting of aluminium
  publication-title: Front Mechn Eng
– volume: 2
  start-page: 158
  year: 2014
  end-page: 162
  ident: bib1100
  article-title: Parametric optimization of abrasive water jet machining of Inconel 800H using Taguchi methodology
  publication-title: Univer J Mech Eng
– volume: 29
  start-page: 535
  year: 2014
  end-page: 544
  ident: bib0685
  article-title: Optimization of abrasive water jet turning parameters for machining of low-density polyethylene material based on experimental design method
  publication-title: Int Polym Process
– volume: 113
  start-page: 29
  year: 1991
  end-page: 37
  ident: bib0975
  article-title: Optimization factors in abrasive-waterjet machining
  publication-title: J Inst Eng
– volume: 13
  start-page: 145
  year: 2010
  end-page: 150
  ident: bib0205
  article-title: Effect of the abrasive grain size on the cutting performance of concrete in awj technology
  publication-title: Technology
– volume: 96
  start-page: 963
  year: 2018
  end-page: 972
  ident: bib0560
  article-title: Investigation on flow field of ultrasonic-assisted abrasive waterjet using CFD with discrete phase model
  publication-title: Int J Adv Manuf Technol
– start-page: 19
  year: 2011
  end-page: 21
  ident: bib0785
  publication-title: 2011 WJTA American Waterjet Conference, Measuring the Water Temperature Changes Throughout the Abrasive Water Jet Cutting System
– volume: 8
  start-page: 809
  year: 2008
  end-page: 819
  ident: bib0435
  article-title: A neuro-genetic approach for selection of process parameters in abrasive waterjet cutting considering variation in diameter of focusing nozzle
  publication-title: Appl Soft Comput
– volume: 232
  start-page: 850
  year: 2018
  end-page: 861
  ident: bib0945
  article-title: Investigation of cutting quality and surface roughness in abrasive water jet machining of bone
  publication-title: Arch Proc Inst Mech Eng Part H J Eng Med 1989-1996
– volume: 34
  start-page: 321
  year: 2019
  end-page: 344
  ident: bib1125
  article-title: Machinability study of abrasive aqua parameters on hybrid metal matrix composite
  publication-title: Mater Manuf Process
– volume: 17
  start-page: 339
  year: 2002
  end-page: 349
  ident: bib0665
  article-title: Turning of glass with abrasive waterjet
  publication-title: Mater Manuf Process
– year: 2012
  ident: bib0680
  publication-title: 21st International Conference on Water Jetting, Turning of (Cu-Cr-Zr) Alloy With Abrasive Water Jet
– volume: 42
  start-page: 863
  year: 2016
  end-page: 865
  ident: bib0505
  article-title: Cutting of food products by ice-particles in a water-jet
  publication-title: Procedia Cirp
– volume: 229
  start-page: 29
  year: 2015
  end-page: 37
  ident: bib0710
  article-title: Abrasive water-jet milling of aeronautic aluminum 2024-T3
  publication-title: Proc Inst Mech Eng, Part I: J Mater Desi Appl
– volume: 210
  start-page: 50
  year: 1997
  end-page: 58
  ident: bib0020
  article-title: Material removal in abrasive waterjet machining of metals surface integrity and texture
  publication-title: Wear
– volume: 111
  start-page: 196
  year: 2018
  end-page: 207
  ident: bib0910
  article-title: The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes
  publication-title: Int J Fatigue
– volume: 265
  start-page: 871
  year: 2008
  end-page: 878
  ident: bib0025
  article-title: Finite element model of erosive wear on ductile and brittle materials
  publication-title: Wear
– volume: 7
  start-page: 115
  year: 2009
  end-page: 124
  ident: bib0510
  article-title: Feasibility study of cryogenic cutting technology by using a computer simulation and manufacture of main components for cryogenic cutting system
  publication-title: J Nucl Fuel Cycle Waste Technol
– volume: 308
  start-page: 7
  year: 2013
  end-page: 12
  ident: bib0525
  article-title: Abrasive water jet cutting of the steels samples cooled by liquid nitrogen
  publication-title: Appl Mech Mater
– volume: 6
  start-page: 415
  year: 2019
  end-page: 432
  ident: bib0775
  article-title: Experimental Investigation of cryogenic assisted abrasive water jet machining of aluminium alloy
  publication-title: Int J Prec Eng Manuf – Green Technol
– volume: 24
  start-page: 1485
  year: 2014
  end-page: 1495
  ident: bib0970
  article-title: Machining human dentin by abrasive water jet drilling
  publication-title: Biomed Mater Eng
– start-page: 19
  year: 2005
  ident: bib0600
  publication-title: Proc 2005 American Waterjet Conference, Analysis of Abrasive Water Jet Drilling Process
– volume: 19
  start-page: 599
  year: 2010
  end-page: 606
  ident: bib0105
  article-title: Cut front geometry characterization in cutting applications of brass with abrasive water jet
  publication-title: J Mater Eng Perform
– volume: 7
  start-page: 191
  year: 2003
  end-page: 207
  ident: bib0315
  article-title: An experimental study to enhance the cutting performance in abrasive waterjet machining
  publication-title: Mach Sci Technol
– volume: 53
  start-page: 536
  year: 2000
  end-page: 546
  ident: bib0750
  article-title: Abrasive waterjet peening: a new method of surface preparation for metal orthopedic implants
  publication-title: J Biomed Mater Res
– volume: 3
  start-page: 360
  year: 2009
  ident: bib0865
  article-title: Optical measurement of surface and topographical parameters investigation created by abrasive waterjet
  publication-title: Int J Surf Sci Eng
– volume: 114
  start-page: 67
  year: 1992
  end-page: 73
  ident: bib0800
  article-title: Thermal energy distributions in the workpiece during cutting with an abrasive waterjet
  publication-title: J Inst Eng
– volume: 1
  start-page: 109
  year: 2011
  end-page: 122
  ident: bib0285
  article-title: Role of garnet and silicon carbide abrasives in abrasive waterjet cutting of aluminum-silicon carbide particulate metal matrix composites
  publication-title: Int J Appl Res Mech
– volume: 59
  start-page: 593
  year: 2012
  end-page: 604
  ident: bib0815
  article-title: Topographical anomaly on surfaces created by abrasive waterjet
  publication-title: Int J Adv Manuf Technol
– volume: 191
  start-page: 404
  year: 2007
  end-page: 407
  ident: bib0210
  article-title: Performance of different abrasive materials during abrasive water jet machining of glass
  publication-title: J Mater Process Technol
– volume: 3
  start-page: 56
  year: 2014
  end-page: 73
  ident: bib0705
  article-title: Prediction of abrasive water jet plain milling process parameters using artificial neural networks
  publication-title: J Mach Manuf Autom
– volume: 304
  start-page: 560
  year: 2006
  end-page: 564
  ident: bib0185
  article-title: The effect of high-pressure abrasive water jet cutting parameters on cutting performance of granite
  publication-title: Key Eng Mater
– start-page: 21
  year: 2007
  end-page: 30
  ident: bib0375
  article-title: Regional conference on engineering mathematics, mechanics, manufacturing and architecture
  publication-title: Optimization of abrasive water jet machining process parameters using orthogonal array with grey relational analysis
– year: 1998
  ident: bib0015
  article-title: Principles of abrasive water jet machining
– volume: 4
  start-page: 672
  year: 2012
  ident: bib0740
  article-title: Investigation of drilling time v/s material thickness using abrasive waterjet machining
  publication-title: Int J Adv Eng Technol
– volume: 42
  start-page: 1297
  year: 2002
  end-page: 1306
  ident: bib0085
  article-title: Processes and apparatus developments in industrial waterjet applications
  publication-title: Int J Mach Tools Manuf
– volume: 32
  start-page: 693
  year: 2017
  end-page: 699
  ident: bib1115
  article-title: Multi-performance optimization of abrasive water jet machining of Inconel 617 using WPCA
  publication-title: Mater Manuf Processes
– volume: 159
  start-page: 356
  year: 2005
  end-page: 368
  ident: bib0165
  article-title: A technical note on grit embedment following abrasive water-jet milling of a titanium alloy
  publication-title: J Mater Process Technol
– volume: 5
  start-page: 86
  year: 2015
  end-page: 91
  ident: bib1015
  article-title: Optimization MRR of Stainless steel 403 in abrasive water jet machining using ANOVA and Taguchi method
  publication-title: Int J Eng Res Appl
– volume: 166
  start-page: 55
  year: 1993
  end-page: 63
  ident: bib0850
  article-title: Hydro-abrasive erosion characteristics of 30vol.% SiCp/6061-T6 Al composite at shallow impact angles
  publication-title: Wear
– volume: 11
  start-page: 5350
  year: 2011
  end-page: 5359
  ident: bib1005
  article-title: Optimization of process parameters in the abrasive waterjet machining using integrated SA–GA
  publication-title: Appl Soft Comput
– volume: 29
  start-page: 1346
  year: 2014
  end-page: 1352
  ident: bib0135
  article-title: Soluble abrasives for waterjet machining
  publication-title: Mater Manuf Processes
– ident: bib1145
  article-title: Robots tackle 3D waterjet cutting for aerospace
– volume: 223
  start-page: 19
  year: 2009
  end-page: 42
  ident: bib0780
  article-title: Response of titanium aluminide alloy to abrasive waterjet cutting: geometrical accuracy and surface integrity issues versus process parameters
  publication-title: Proc Inst Mech Eng Part B: J Eng Manuf
– volume: 23
  start-page: 1453
  year: 1988
  end-page: 1458
  ident: bib0845
  article-title: Surface characterization of SiC whisker/2124 aluminium and Al 2 O 3 composites machined by abrasive water jet
  publication-title: J Mater Sci
– volume: 95
  start-page: 25
  year: 2010
  end-page: 29
  ident: bib0470
  article-title: Comminution of material particles by water jets—influence of the inner shape of the mixing chamber
  publication-title: Int J Miner Process
– volume: 42
  start-page: 781
  year: 2002
  end-page: 789
  ident: bib0235
  article-title: Optimising the AWJ cutting process of ductile materials using nozzle oscillation technique
  publication-title: Int J Mach Tools Manuf
– volume: 258
  start-page: 123
  year: 2005
  end-page: 132
  ident: bib0390
  article-title: Characteristics of the surface of a titanium alloy following milling with abrasive waterjets
  publication-title: Wear
– year: 2018
  ident: bib0575
  article-title: Advanced abrasive waterjet for multimode machining, abrasive technology - characteristics and applications, Anna rudawska
  publication-title: IntechOpen
– volume: 21
  start-page: 385
  year: 2017
  end-page: 415
  ident: bib0065
  article-title: Study and evaluation of abrasive water jet cutting performance on AA5083-H32 aluminum alloy by varying the jet impingement angles with different abrasive mesh sizes
  publication-title: Mach Sci Technol
– volume: 6
  start-page: 366
  year: 2018
  end-page: 374
  ident: bib0350
  article-title: Effect of process parameters on depth of penetration and topography of AZ91 magnesium alloy in abrasive water jet cutting
  publication-title: J Magnes Alloy
– volume: 3
  start-page: 120
  year: 2008
  end-page: 132
  ident: bib0240
  article-title: Influence of jet impact angle on part geometry in abrasive waterjet turning of aluminium alloys
  publication-title: Int J Mach Mach Mater
– volume: 30
  start-page: 810
  year: 2009
  end-page: 815
  ident: bib0100
  article-title: The effect of material type and plate thickness on drilling time of abrasive water jet drilling process
  publication-title: Mater Des
– volume: 3
  start-page: 87
  year: 1960
  end-page: 103
  ident: bib0330
  article-title: Erosion of surfaces by solid particles
  publication-title: Wear
– volume: 7
  start-page: 1
  year: 2015
  end-page: 9
  ident: bib0495
  article-title: Thermal aspects of ice abrasive water jet technology
  publication-title: Adv Mech Eng
– volume: 62
  start-page: 555
  year: 2013
  end-page: 558
  ident: bib0840
  article-title: On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
  publication-title: CIRP Ann Manuf Technol
– volume: 49
  start-page: 1077
  year: 2009
  end-page: 1088
  ident: bib0290
  article-title: Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics
  publication-title: Int J Mach Tools Manuf
– volume: 217
  start-page: 1709
  year: 2003
  end-page: 1721
  ident: bib0855
  article-title: Machinability of titanium alloy (Ti’6Al’4V) by abrasive waterjets
  publication-title: Proc Inst Mech Eng, Part B: J Eng Manuf
– volume: 73
  start-page: 941
  year: 2014
  end-page: 947
  ident: bib0320
  article-title: Topography and microstructure of the cutting surface machined with abrasive waterjet
  publication-title: Int J Adv Manuf Technol
– volume: 31
  start-page: 6485
  year: 1996
  end-page: 6493
  ident: bib0860
  article-title: Machining refractory ceramics with abrasive water jets
  publication-title: J Mater Sci
– volume: 44
  start-page: 1125
  year: 2004
  end-page: 1132
  ident: bib0395
  article-title: Quantitative evaluation of abrasive contamination in ductile material during abrasive water jet machining and minimising with a nozzle head oscillation technique
  publication-title: Int J Mach Tools Manuf
– volume: 77
  start-page: 367
  year: 2018
  end-page: 370
  ident: bib0010
  article-title: Suspension technology for abrasive waterjet (AWJ) cutting of ceramics
  publication-title: Procedia Cirp
– start-page: 19
  year: 2007
  end-page: 21
  ident: bib0385
  publication-title: American WJTA Conference and Expo, Optimization of UHP Waterjet Cutting Heads the Orifice
– start-page: 17
  year: 2003
  end-page: 19
  ident: bib0460
  publication-title: Summers DA. Proc. 2003 WJTA American Water Jet Conference, Comparative Performance Study of Polyacrylamide and Xanthan Polymer in Abrasive Slurry Jet
– volume: 45
  start-page: 327
  year: 1996
  end-page: 330
  ident: bib0280
  article-title: Enhancing abrasive waterjet cutting of ceramics by head oscillation techniques
  publication-title: CIRP Ann Manuf Technol
– volume: 697
  start-page: 166
  year: 2012
  end-page: 170
  ident: bib0700
  article-title: An experimental study of radial-mode abrasive waterjet turning of steels
  publication-title: Mater Sci Forum
– start-page: 59
  year: 1979
  end-page: 76
  ident: bib0040
  article-title: Mechanisms of the erosion of metals by solid particles. Erosion: prevention and useful applications
  publication-title: J ASTM Int
– volume: 135
  start-page: 1
  year: 2003
  end-page: 5
  ident: bib0345
  article-title: The effect of cutting jet variation on surface striation formation in abrasive water jet cutting
  publication-title: J Mater Process Technol
– volume: 13
  start-page: 382
  year: 2014
  end-page: 386
  ident: bib0130
  article-title: The impact of plain waterjet machining on the surface integrity of aluminium 7475
  publication-title: Procedia Cirp
– volume: 6
  start-page: 5
  year: 1963
  end-page: 21
  ident: bib0045
  article-title: A study of erosion phenomena part I
  publication-title: Wear
– year: 2009
  ident: bib0920
  article-title: Fatigue testing of abrasive water jet cut titanium
– start-page: 18
  year: 2009
  end-page: 20
  ident: bib0925
  publication-title: Proc. of American WJTA Conference, Fatigue Performance Enhancement of AWJ-Machined Aircraft Aluminum With Dry-Grit Blasting
– volume: 97
  start-page: 2255
  year: 2018
  end-page: 2292
  ident: bib0940
  article-title: Machining of biocompatible materials: a review
  publication-title: Int J Adv Manuf Technol
– volume: 266
  start-page: 613
  year: 2009
  end-page: 620
  ident: bib0160
  article-title: The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V
  publication-title: Wear
– volume: 45
  start-page: 1443
  year: 2005
  end-page: 1450
  ident: bib0190
  article-title: A strategy for efficient and quality cutting of materials with abrasive waterjets considering the variation in orifice and focusing nozzle diameter
  publication-title: Int J Mach Tools Manuf
– volume: 209
  start-page: 6181
  year: 2009
  end-page: 6189
  ident: bib0005
  article-title: Waterjet—an innovative tool for manufacturing
  publication-title: J Mater Process Technol
– volume: 29
  start-page: 648
  year: 1994
  end-page: 650
  ident: bib0965
  article-title: Liver resection in children, using a water-jet
  publication-title: J Pediatr Surg
– volume: 16
  start-page: 59
  year: 2012
  end-page: 62
  ident: bib1045
  article-title: Application of modelling and optimization methods in abrasive water jet machining
  publication-title: J Trends Dev Machin Assoc Technol
– volume: 25
  start-page: 83
  year: 2016
  end-page: 88
  ident: bib0720
  article-title: Modeling of Depth/Width of cut for abrasive water jet milling of titanium
  publication-title: J Korean Soc Manuf Technol Eng
– start-page: 205
  year: 2012
  end-page: 233
  ident: bib0760
  article-title: Micro abrasive-waterjet technology. Micromachining techniques for fabrication of micro and nano structures
  publication-title: InTech
– volume: 32
  start-page: 162
  year: 2017
  end-page: 170
  ident: bib0325
  article-title: Surface integrity studies on abrasive water jet cutting of AISI D2 steel
  publication-title: Mater Manuf Processes
– reference: OMAX, USA,
– volume: 147
  start-page: 389
  year: 2004
  end-page: 396
  ident: bib0110
  article-title: Effect of feed rate on surface roughness in abrasive waterjet cutting applications
  publication-title: J Mater Process Technol
– volume: 100
  start-page: 1575
  year: 2019
  end-page: 1591
  ident: bib0930
  article-title: Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718
  publication-title: Int J Adv Manuf Technol
– volume: 69
  start-page: 93
  year: 1982
  end-page: 94
  ident: bib0950
  article-title: Resection of the liver with a water jet
  publication-title: Br J Surg
– volume: 266
  start-page: 1091
  year: 2009
  end-page: 1097
  ident: bib0340
  article-title: An erosion-based model for abrasive waterjet turning of ductile materials
  publication-title: Wear
– volume: 71
  start-page: 223
  year: 2004
  end-page: 228
  ident: bib0955
  article-title: Abrasive water jet cutting as a new procedure for cutting cancellous bone—in vitro testing in comparison with the oscillating saw
  publication-title: J Biomed Mater Res B Appl Biomater
– volume: 20
  start-page: 118
  year: 2018
  end-page: 140
  ident: bib1040
  article-title: Optimisation of abrasive water jet cutting process parameters for AA5083-H32 aluminium alloy using fuzzy TOPSIS method
  publication-title: Int J Mach Mach Mater
– volume: 210
  start-page: 2197
  year: 2010
  end-page: 2205
  ident: bib0825
  article-title: Abrasive waterjet cutting of a titanium alloy: the influence of abrasive morphology and mechanical properties on workpiece grit embedment and cut quality
  publication-title: J Mater Process Technol
– volume: 38
  start-page: 454
  year: 2016
  end-page: 462
  ident: bib1085
  article-title: Multi-objective optimization of process performances when cutting carbon steel with abrasive water jet
  publication-title: Tribol Ind
– volume: 51
  start-page: 39
  year: 2012
  end-page: 42
  ident: bib0810
  article-title: Evaluation of abrasive waterjet produced titan surfaces topography by spectral analysis techniques
  publication-title: Metal
– volume: 4
  start-page: 344
  year: 2015
  end-page: 347
  ident: bib0150
  article-title: Studies on jet penetration and kerf width at various operating pressure in machining of D2 heat treated steel using abrasive water jet
  publication-title: Int J Res Eng Technol
– volume: 10
  start-page: 197
  year: 2006
  end-page: 218
  ident: bib0630
  article-title: Improving fatigue strength of metals using abrasive waterjet peening
  publication-title: Machin Sci Technol
– volume: 32
  start-page: 1095
  year: 2006
  end-page: 1112
  ident: bib0335
  article-title: Finite element analysis of single-particle impact in abrasive water jet machining
  publication-title: Int J Impact Eng
– volume: 53
  start-page: 533
  year: 2014
  end-page: 536
  ident: bib0445
  article-title: Monitoring of focusing tube wear during abrasive waterjet (AWJ) cutting of AISI 309
  publication-title: Metal
– volume: 10
  start-page: 15
  year: 2017
  end-page: 22
  ident: bib1060
  article-title: Optimization of abrasive water jet cutting parameter for AISI 316L stainless steel sheet
  publication-title: J Appl Fluid Mech
– volume: 38
  start-page: 8370
  year: 2011
  end-page: 8374
  ident: bib0985
  article-title: Multi-attribute decision making for green electrical discharge machining
  publication-title: Expert Syst Appl
– volume: 49
  start-page: 569
  year: 2009
  end-page: 578
  ident: bib0745
  article-title: Experimental study on abrasive waterjet polishing for hard–brittle materials
  publication-title: Int J Mach Tools Manuf
– volume: 8
  start-page: 632
  year: 2014
  end-page: 636
  ident: bib1095
  article-title: Machining of FRP composites by abrasive jet machining optimization using Taguchi
  publication-title: Int J Mech Aerosp Ind Mechatron Manuf Eng
– volume: 209
  start-page: 6168
  year: 2009
  end-page: 6173
  ident: bib0360
  article-title: A study of abrasive water jet machining process on glass/epoxy composite laminate
  publication-title: J Mater Process Technol
– volume: 88
  start-page: 1687
  year: 2017
  end-page: 1701
  ident: bib0620
  article-title: Surface integrity analysis of abrasive water jet-cut surfaces of friction stir welded joints
  publication-title: Int J Adv Manuf Technol
– volume: 61
  start-page: 1019
  year: 2012
  end-page: 1028
  ident: bib0440
  article-title: Development of an algorithm for optimum control process to compensate the nozzle wear effect in cutting the hard and tough material using abrasive water jet cutting process
  publication-title: Int J Adv Manuf Technol
– volume: 58
  start-page: 303
  year: 2009
  end-page: 306
  ident: bib0465
  article-title: An integrated monitoring method to supervise waterjet machining
  publication-title: CIRP Ann Manuf Technol
– volume: 202
  start-page: 574
  year: 2008
  end-page: 582
  ident: bib1000
  article-title: A study of surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method
  publication-title: J Mater Process Technol
– volume: 81
  start-page: 671
  year: 2009
  end-page: 677
  ident: bib0500
  article-title: Cutting meat with bone using an ultrahigh pressure abrasive waterjet
  publication-title: Meat Sci
– volume: 1
  year: 2017
  ident: bib0755
  article-title: “7M” advantage of abrasive waterjet for machining advanced materials
  publication-title: J Manuf Mater Process
– volume: 181
  start-page: 443
  year: 1995
  end-page: 457
  ident: bib0030
  article-title: Wear models and predictive equations: their form and content
  publication-title: Wear
– volume: 4
  year: 2011
  ident: bib0765
  article-title: Development of Micro abrasive waterjet technology
  publication-title: SciTopics
– volume: 53
  start-page: 533
  year: 2014
  end-page: 536
  ident: bib0180
  article-title: Monitoring of focusing tube wear during abrasive waterjet (AWJ) cutting of AISI 309
  publication-title: Metal
– volume: 78
  start-page: 1361
  year: 2015
  end-page: 1369
  ident: bib0530
  article-title: A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials
  publication-title: Int J Adv Manuf Technol
– volume: 26
  start-page: 88
  year: 2011
  end-page: 92
  ident: bib0365
  article-title: Optimization of abrasive water jet cutting of ductile materials
  publication-title: J Wuhan Univ Technol-Mater Sci Ed
– start-page: 012020
  year: 2016
  ident: bib0450
  article-title: IOP Conference Series: materials Science and Engineering, A review on nozzle wear in abrasive water jet machining application
– volume: 6
  start-page: 140
  year: 2014
  end-page: 149
  ident: bib1075
  article-title: Minimization of kerf taper angle and kerf width using Taguchi’s method in abrasive water jet machining of marble
  publication-title: Procedia Mater Sci
– volume: 1
  start-page: 30
  year: 2017
  end-page: 33
  ident: bib1090
  article-title: An implementation of fuzzy logic technique to predict the material removal rate in abrasive water jet machining process
  publication-title: Libiyan J Eng Res
– volume: 10
  start-page: 32
  year: 1991
  end-page: 40
  ident: bib0220
  article-title: Surface texture in abrasive waterjet cutting
  publication-title: Int J Ind Manuf Syst Eng
– volume: 20
  start-page: 127
  year: 2008
  end-page: 134
  ident: bib0485
  article-title: Design and validation of a hybrid laser/water-jet machining system for brittle materials
  publication-title: J Laser Appl
– reference: Waterjetting 11c - Mixing abrasive with a water jet,
– volume: 32
  start-page: 1095
  issue: 7
  year: 2006
  ident: 10.1016/j.jmapro.2019.11.030_bib0335
  article-title: Finite element analysis of single-particle impact in abrasive water jet machining
  publication-title: Int J Impact Eng
  doi: 10.1016/j.ijimpeng.2004.09.006
– volume: 3
  start-page: 360
  issue: 4
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0865
  article-title: Optical measurement of surface and topographical parameters investigation created by abrasive waterjet
  publication-title: Int J Surf Sci Eng
  doi: 10.1504/IJSURFSE.2009.027421
– volume: 45
  start-page: 327
  issue: 1
  year: 1996
  ident: 10.1016/j.jmapro.2019.11.030_bib0280
  article-title: Enhancing abrasive waterjet cutting of ceramics by head oscillation techniques
  publication-title: CIRP Ann Manuf Technol
  doi: 10.1016/S0007-8506(07)63073-X
– volume: 209
  start-page: 6168
  issue: 20
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0360
  article-title: A study of abrasive water jet machining process on glass/epoxy composite laminate
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2009.08.011
– volume: 308
  start-page: 7
  year: 2013
  ident: 10.1016/j.jmapro.2019.11.030_bib0525
  article-title: Abrasive water jet cutting of the steels samples cooled by liquid nitrogen
  publication-title: Appl Mech Mater
  doi: 10.4028/www.scientific.net/AMM.308.7
– volume: 27
  start-page: 538
  issue: 5
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0455
  article-title: An experimental study on the depth of cut of granite in abrasive waterjet cutting
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2011.593231
– volume: 38
  start-page: 8370
  issue: 7
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0985
  article-title: Multi-attribute decision making for green electrical discharge machining
  publication-title: Expert Syst Appl
  doi: 10.1016/j.eswa.2011.01.026
– volume: 30
  start-page: 882
  issue: 7
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib1035
  article-title: Multiresponse optimization of abrasive water jet cutting process parameters using TOPSIS approach
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2014.994763
– volume: 891–892
  start-page: 1761
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0915
  article-title: Influence of milling and abrasive water jet cutting on the fatigue behaviour of DP600 steel sheet
  publication-title: Adv Mater Res
  doi: 10.4028/www.scientific.net/AMR.891-892.1761
– volume: 4
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0765
  article-title: Development of Micro abrasive waterjet technology
  publication-title: SciTopics
– volume: 2
  start-page: 158
  issue: 5
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib1100
  article-title: Parametric optimization of abrasive water jet machining of Inconel 800H using Taguchi methodology
  publication-title: Univer J Mech Eng
  doi: 10.13189/ujme.2014.020502
– start-page: 65
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0610
– volume: 8
  start-page: 632
  issue: 3
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib1095
  article-title: Machining of FRP composites by abrasive jet machining optimization using Taguchi
  publication-title: Int J Mech Aerosp Ind Mechatron Manuf Eng
– start-page: 205
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0760
  article-title: Micro abrasive-waterjet technology. Micromachining techniques for fabrication of micro and nano structures
  publication-title: InTech
– year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0570
  article-title: Experimental study of the ultrasonic vibration-assisted abrasive waterjet micromachining the quartz glass
  publication-title: Adv Mater Sci Eng Int J
  doi: 10.1155/2018/8904234
– volume: 487
  start-page: 327
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0060
  article-title: Study of abrasive water jet polishing technology
  publication-title: Key Eng Mater
  doi: 10.4028/www.scientific.net/KEM.487.327
– year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0680
– volume: 1
  start-page: 30
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib1090
  article-title: An implementation of fuzzy logic technique to predict the material removal rate in abrasive water jet machining process
  publication-title: Libiyan J Eng Res
– volume: 1
  issue: 1
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0755
  article-title: “7M” advantage of abrasive waterjet for machining advanced materials
  publication-title: J Manuf Mater Process
– volume: 53
  start-page: 533
  issue: 4
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0445
  article-title: Monitoring of focusing tube wear during abrasive waterjet (AWJ) cutting of AISI 309
  publication-title: Metal
– volume: 18
  start-page: 303
  issue: 3
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0875
  article-title: The effect of cutting process on surface microstructure and hardness of pure and Al 6061 aluminium alloy
  publication-title: Int Res J Eng Sci Technol Innov
– volume: 17
  start-page: 339
  issue: 3
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0665
  article-title: Turning of glass with abrasive waterjet
  publication-title: Mater Manuf Process
  doi: 10.1081/AMP-120005380
– volume: 10
  start-page: 348
  year: 2013
  ident: 10.1016/j.jmapro.2019.11.030_bib0725
  article-title: Role of process parameters on pocket milling with Abrasive Water Jet Machining technique
  publication-title: Int J Mech Mechatron Eng
– volume: 42
  start-page: 863
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0505
  article-title: Cutting of food products by ice-particles in a water-jet
  publication-title: Procedia Cirp
  doi: 10.1016/j.procir.2016.03.009
– volume: 48
  issue: 4
  year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib0580
  article-title: Investigation of surface morphology and topography features on abrasive water jet milled surface pattern of SS 304
  publication-title: J Test Eval
  doi: 10.1520/JTE20180856
– volume: 25
  start-page: 1160
  issue: 10
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0830
  article-title: Effect of traverse speed on abrasive waterjet machining of age hardened Inconel 718 nickel-based superalloy
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2010.502953
– volume: 42
  start-page: 781
  issue: 7
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0235
  article-title: Optimising the AWJ cutting process of ductile materials using nozzle oscillation technique
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/S0890-6955(02)00017-2
– volume: 214
  start-page: 781
  issue: 9
  year: 2000
  ident: 10.1016/j.jmapro.2019.11.030_bib0995
  article-title: A hybrid approach for selection of optimal process parameters in abrasive water jet cutting
  publication-title: Proc Inst Mech Eng Part B: J Eng Manuf.
  doi: 10.1243/0954405001517847
– volume: 210
  start-page: 50
  issue: 1-2
  year: 1997
  ident: 10.1016/j.jmapro.2019.11.030_bib0020
  article-title: Material removal in abrasive waterjet machining of metals surface integrity and texture
  publication-title: Wear
  doi: 10.1016/S0043-1648(97)00087-2
– volume: 20
  start-page: 118
  issue: 2
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib1040
  article-title: Optimisation of abrasive water jet cutting process parameters for AA5083-H32 aluminium alloy using fuzzy TOPSIS method
  publication-title: Int J Mach Mach Mater
– volume: 21
  start-page: 385
  issue: 3
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0065
  article-title: Study and evaluation of abrasive water jet cutting performance on AA5083-H32 aluminum alloy by varying the jet impingement angles with different abrasive mesh sizes
  publication-title: Mach Sci Technol
  doi: 10.1080/10910344.2017.1283958
– volume: 191
  start-page: 404
  issue: 1-3
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0210
  article-title: Performance of different abrasive materials during abrasive water jet machining of glass
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2007.03.071
– year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0565
  article-title: Experimental investigation on the material removal of the ultrasonic vibration assisted abrasive water jet machining ceramics
  publication-title: Adv Mater Sci Eng Int J
– start-page: 483
  year: 1992
  ident: 10.1016/j.jmapro.2019.11.030_bib0080
  article-title: Development of an abrasive waterjet kerf cutting model for brittle materials
  publication-title: Jet Cutting Technology
  doi: 10.1007/978-94-011-2678-6_33
– volume: 56
  start-page: 1019
  issue: 9–12
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib1025
  article-title: Multi response optimization of process parameters based on Taguchi—fuzzy model for coal cutting by water jet technology
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-011-3258-x
– volume: 1
  start-page: 409
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0670
  article-title: Abrasive waterjet turning of high performance materials
  publication-title: Procedia Cirp
  doi: 10.1016/j.procir.2012.04.073
– volume: 51
  start-page: 11
  issue: 9–10
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib1135
  article-title: Abrasive water suspension jet technology fundamentals, application and developments
  publication-title: Weld World
  doi: 10.1007/BF03266595
– volume: 4
  start-page: 344
  issue: 9
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0150
  article-title: Studies on jet penetration and kerf width at various operating pressure in machining of D2 heat treated steel using abrasive water jet
  publication-title: Int J Res Eng Technol
  doi: 10.15623/ijret.2015.0409064
– volume: 8
  start-page: 171
  issue: 2
  year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0900
  article-title: Parametric effects on particle deposition in abrasive waterjet surface treatments
  publication-title: Mach Sci Technol
  doi: 10.1081/MST-200028726
– volume: 38
  start-page: 692
  issue: 6
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib1070
  article-title: Investigation of multiple process parameters in abrasive water jet machining of tiles
  publication-title: J Chin Inst Eng
  doi: 10.1080/02533839.2015.1010944
– volume: 38
  start-page: 454
  issue: 4
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib1085
  article-title: Multi-objective optimization of process performances when cutting carbon steel with abrasive water jet
  publication-title: Tribol Ind
– year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0805
– volume: 10
  start-page: 197
  issue: 2
  year: 2006
  ident: 10.1016/j.jmapro.2019.11.030_bib0630
  article-title: Improving fatigue strength of metals using abrasive waterjet peening
  publication-title: Machin Sci Technol
  doi: 10.1080/10910340600710105
– volume: 325
  start-page: 621
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0715
  article-title: A study of material removal process in abrasive waterjet milling
  publication-title: Adv Mater Res
  doi: 10.4028/www.scientific.net/AMR.325.621
– volume: 49
  start-page: 569
  issue: 7-8
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0745
  article-title: Experimental study on abrasive waterjet polishing for hard–brittle materials
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2009.02.005
– year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0575
  article-title: Advanced abrasive waterjet for multimode machining, abrasive technology - characteristics and applications, Anna rudawska
  publication-title: IntechOpen
– year: 1998
  ident: 10.1016/j.jmapro.2019.11.030_bib0015
– volume: 42
  start-page: 1385
  issue: 13
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0140
  article-title: Minimising particle contamination at abrasive waterjet machined surfaces by a nozzle oscillation technique
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/S0890-6955(02)00081-0
– volume: 28
  start-page: 1953
  issue: 6
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0170
  article-title: Effect of traverse speed on abrasive waterjet machining of Ti–6Al–4V alloy
  publication-title: Mater Des
  doi: 10.1016/j.matdes.2006.04.020
– volume: 229
  start-page: 29
  issue: 1
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0710
  article-title: Abrasive water-jet milling of aeronautic aluminum 2024-T3
  publication-title: Proc Inst Mech Eng, Part I: J Mater Desi Appl
– volume: 218
  start-page: 503
  issue: 5
  year: 2004
  ident: 10.1016/j.jmapro.2019.11.030_bib0595
  article-title: An experimental study of drilling small and deep blind holes with an abrasive water jet
  publication-title: Proc Inst Mech Eng Part B: J Eng Manuf
  doi: 10.1177/095440540421800504
– volume: 304
  start-page: 560
  year: 2006
  ident: 10.1016/j.jmapro.2019.11.030_bib0185
  article-title: The effect of high-pressure abrasive water jet cutting parameters on cutting performance of granite
  publication-title: Key Eng Mater
  doi: 10.4028/www.scientific.net/KEM.304-305.560
– start-page: 25
  year: 1998
  ident: 10.1016/j.jmapro.2019.11.030_bib0415
– volume: 114
  start-page: 67
  issue: 1
  year: 1992
  ident: 10.1016/j.jmapro.2019.11.030_bib0800
  article-title: Thermal energy distributions in the workpiece during cutting with an abrasive waterjet
  publication-title: J Inst Eng
– year: 1993
  ident: 10.1016/j.jmapro.2019.11.030_bib0070
– volume: 13
  start-page: 145
  issue: 3
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0205
  article-title: Effect of the abrasive grain size on the cutting performance of concrete in awj technology
  publication-title: Technology
– volume: 697
  start-page: 166
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0700
  article-title: An experimental study of radial-mode abrasive waterjet turning of steels
  publication-title: Mater Sci Forum
– volume: 11
  start-page: 5350
  issue: 8
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib1005
  article-title: Optimization of process parameters in the abrasive waterjet machining using integrated SA–GA
  publication-title: Appl Soft Comput
  doi: 10.1016/j.asoc.2011.05.024
– volume: 59
  start-page: 593
  issue: 5-8
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0815
  article-title: Topographical anomaly on surfaces created by abrasive waterjet
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-011-3511-3
– volume: 77
  start-page: 1811
  issue: 9–12
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0430
  article-title: Investigation of the taper of kerfs cut in steels by AWJ
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-014-6578-9
– volume: 6
  start-page: 169
  issue: 3
  year: 1963
  ident: 10.1016/j.jmapro.2019.11.030_bib0050
  article-title: A study of erosion phenomena: part II
  publication-title: Wear
  doi: 10.1016/0043-1648(63)90073-5
– volume: 49
  start-page: 797
  issue: 10
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0675
  article-title: Abrasive waterjet cutting of polycrystalline diamond: a preliminary investigation
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2009.04.003
– volume: 266
  start-page: 613
  issue: 7-8
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0160
  article-title: The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V
  publication-title: Wear
  doi: 10.1016/j.wear.2008.06.013
– volume: 20
  start-page: 127
  issue: 2
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0485
  article-title: Design and validation of a hybrid laser/water-jet machining system for brittle materials
  publication-title: J Laser Appl
  doi: 10.2351/1.2900554
– volume: 77
  start-page: 367
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0010
  article-title: Suspension technology for abrasive waterjet (AWJ) cutting of ceramics
  publication-title: Procedia Cirp
  doi: 10.1016/j.procir.2018.09.037
– start-page: 333
  year: 2013
  ident: 10.1016/j.jmapro.2019.11.030_bib0115
– volume: 10
  start-page: 202
  year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib0770
– volume: 4
  start-page: 672
  issue: 1
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0740
  article-title: Investigation of drilling time v/s material thickness using abrasive waterjet machining
  publication-title: Int J Adv Eng Technol
– volume: 88
  start-page: 1687
  issue: 5-8
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0620
  article-title: Surface integrity analysis of abrasive water jet-cut surfaces of friction stir welded joints
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-016-8776-0
– volume: 209
  start-page: 4154
  issue: 8
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0175
  article-title: Investigation of the abrasive water jet trajectory curvature inside the kerf
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2008.10.009
– ident: 10.1016/j.jmapro.2019.11.030_bib0075
– volume: 88
  start-page: 393
  issue: 4
  year: 1966
  ident: 10.1016/j.jmapro.2019.11.030_bib0055
  article-title: The mechanism of material removal in the erosive cutting of brittle materials
  publication-title: J Inst Eng
– volume: 6
  start-page: 066532
  year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib0605
  article-title: Experimental study on deep-hole making in Ti-6Al-4V by abrasive water jet machining
  publication-title: Mater Res Express
  doi: 10.1088/2053-1591/ab0c35
– volume: 100
  start-page: 1575
  issue: 5–8
  year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib0930
  article-title: Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-018-2697-z
– volume: 6
  start-page: 366
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0350
  article-title: Effect of process parameters on depth of penetration and topography of AZ91 magnesium alloy in abrasive water jet cutting
  publication-title: J Magnes Alloy
  doi: 10.1016/j.jma.2018.07.001
– volume: 24
  start-page: 1485
  issue: 2
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0970
  article-title: Machining human dentin by abrasive water jet drilling
  publication-title: Biomed Mater Eng
– volume: 35
  start-page: 307
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0555
  article-title: Masked micro-channel machining in aluminium alloy and borosilicate glass using abrasive waterjet micro-machining
  publication-title: J Manuf Process
  doi: 10.1016/j.jmapro.2018.08.017
– volume: 6
  start-page: 415
  issue: 3
  year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib0775
  article-title: Experimental Investigation of cryogenic assisted abrasive water jet machining of aluminium alloy
  publication-title: Int J Prec Eng Manuf – Green Technol
  doi: 10.1007/s40684-019-00072-x
– volume: 3
  start-page: 56
  issue: 3
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0705
  article-title: Prediction of abrasive water jet plain milling process parameters using artificial neural networks
  publication-title: J Mach Manuf Autom
– volume: 70
  start-page: 2275
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0980
  article-title: A fuzzy based decision model for nontraditional machining process selection
  publication-title: Int J J Adv Manuf Technol
  doi: 10.1007/s00170-013-5474-z
– volume: 10
  start-page: 92
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0535
  article-title: Experimental investigations of thermally enhanced abrasive water jet machining of hard-to-machine metals
  publication-title: CIRP J Manuf Sci Technol
  doi: 10.1016/j.cirpj.2015.04.002
– volume: 89
  start-page: 1193
  issue: 1-4
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0540
  article-title: Experimental investigations of gelatin-enabled abrasive water slurry jet machining
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-016-9154-7
– start-page: 67
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0490
  article-title: Ice jet machining: a sustainable variant of abrasive water jet machining
  publication-title: Sustainable Mach
  doi: 10.1007/978-3-319-51961-6_4
– ident: 10.1016/j.jmapro.2019.11.030_bib1145
– volume: 265
  start-page: 821
  issue: 5–6
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0870
  article-title: Analysis of striation formation mechanism in abrasive water jet cutting
  publication-title: Wear
  doi: 10.1016/j.wear.2008.01.018
– volume: 6
  start-page: 140
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib1075
  article-title: Minimization of kerf taper angle and kerf width using Taguchi’s method in abrasive water jet machining of marble
  publication-title: Procedia Mater Sci
  doi: 10.1016/j.mspro.2014.07.017
– volume: 210
  start-page: 2197
  issue: 15
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0825
  article-title: Abrasive waterjet cutting of a titanium alloy: the influence of abrasive morphology and mechanical properties on workpiece grit embedment and cut quality
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2010.08.006
– volume: 31
  start-page: 1733
  issue: 13
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0295
  article-title: Machinability of nickel-based superalloy by abrasive water jet machining
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2015.1103859
– volume: 32
  start-page: 693
  issue: 6
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib1115
  article-title: Multi-performance optimization of abrasive water jet machining of Inconel 617 using WPCA
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2016.1244844
– volume: 21
  issue: 5
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0790
  article-title: Measurement of thermal emission during cutting of materials using abrasive water jet
  publication-title: Therm Sci
  doi: 10.2298/TSCI150212046P
– volume: 362
  start-page: 18
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0545
  article-title: Cutting of aluminium alloy with abrasive water jet and cryogenic assisted abrasive water jet: a comparative study of the surface integrity approach
  publication-title: Wear
  doi: 10.1016/j.wear.2016.05.008
– volume: 223
  start-page: 19
  issue: 1
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0780
  article-title: Response of titanium aluminide alloy to abrasive waterjet cutting: geometrical accuracy and surface integrity issues versus process parameters
  publication-title: Proc Inst Mech Eng Part B: J Eng Manuf
  doi: 10.1243/09544054JEM1226
– start-page: 18
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0925
– year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib0905
  article-title: Abrasive water jet cutting: a risk-free technology for machining Mg-Based materials
  publication-title: IntechOpen
– volume: 51
  start-page: 39
  issue: 1
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0810
  article-title: Evaluation of abrasive waterjet produced titan surfaces topography by spectral analysis techniques
  publication-title: Metal
– volume: 265
  start-page: 871
  issue: 5-6
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0025
  article-title: Finite element model of erosive wear on ductile and brittle materials
  publication-title: Wear
  doi: 10.1016/j.wear.2008.01.014
– volume: 431
  start-page: 261
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0885
  article-title: A study on the abrasive waterjet milling mechanisms of ceramic materials
  publication-title: Key Eng Mat
  doi: 10.4028/www.scientific.net/KEM.431-432.261
– ident: 10.1016/j.jmapro.2019.11.030_bib1140
– volume: 209
  start-page: 6181
  issue: 20
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0005
  article-title: Waterjet—an innovative tool for manufacturing
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2009.05.025
– volume: 13
  start-page: 382
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0130
  article-title: The impact of plain waterjet machining on the surface integrity of aluminium 7475
  publication-title: Procedia Cirp
  doi: 10.1016/j.procir.2014.04.065
– volume: 69
  start-page: 93
  issue: 2
  year: 1982
  ident: 10.1016/j.jmapro.2019.11.030_bib0950
  article-title: Resection of the liver with a water jet
  publication-title: Br J Surg
  doi: 10.1002/bjs.1800690212
– start-page: 19
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0785
– volume: 22
  issue: 5
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0645
  article-title: Experimental study on abrasive waterjet polishing of hydraulic turbine blades
  publication-title: IOP Conf. Ser.: Earth Environ. Sci IOP Publishing
– volume: 117
  start-page: 475
  issue: 4
  year: 1995
  ident: 10.1016/j.jmapro.2019.11.030_bib0655
  article-title: Effect of abrasive waterjet parameters on volume removal trends in turning
  publication-title: J Inst Eng
– volume: 2
  start-page: 19
  issue: 5
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib1080
  article-title: Optimization of machining parameters in AWJM process for an copper Iron alloy using RSM and regression analysis
  publication-title: Int J Emerging Eng Res Technol
– volume: 74
  start-page: 251
  issue: 1-3
  year: 1998
  ident: 10.1016/j.jmapro.2019.11.030_bib0145
  article-title: Optimising abrasive waterjet cutting of ceramic materials
  publication-title: J Mater Process Technol
  doi: 10.1016/S0924-0136(97)00278-1
– volume: 1
  start-page: 73
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0425
  article-title: Milling of materials by water jets—acting of liquid jet in the cutting head
  publication-title: Trans VŠB—Tech UnivOstravMechSer
– volume: 49
  start-page: 1077
  issue: 14
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0290
  article-title: Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2009.07.007
– volume: 232
  start-page: 850
  issue: 9
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0945
  article-title: Investigation of cutting quality and surface roughness in abrasive water jet machining of bone
  publication-title: Arch Proc Inst Mech Eng Part H J Eng Med 1989-1996
  doi: 10.1177/0954411918790777
– volume: 1
  start-page: 404
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0650
  article-title: Characterisation of abrasive water-jet process for pocket milling in Inconel 718
  publication-title: Procedia Cirp
  doi: 10.1016/j.procir.2012.04.072
– volume: 147
  start-page: 389
  issue: 3
  year: 2004
  ident: 10.1016/j.jmapro.2019.11.030_bib0110
  article-title: Effect of feed rate on surface roughness in abrasive waterjet cutting applications
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2004.01.013
– volume: 185
  start-page: 217
  issue: 1-3
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0195
  article-title: A soft computing approach for controlling the quality of cut with abrasive waterjet cutting system experiencing orifice and focusing tube wear
  publication-title: J Mater Processes Technol
  doi: 10.1016/j.jmatprotec.2006.03.124
– volume: 249
  start-page: 943
  issue: 10–11
  year: 2001
  ident: 10.1016/j.jmapro.2019.11.030_bib0120
  article-title: Waterjet and abrasive waterjet surface treatment of titanium: a comparison of surface texture and residual stress
  publication-title: Wear
  doi: 10.1016/S0043-1648(01)00826-2
– volume: 3
  start-page: 87
  issue: 2
  year: 1960
  ident: 10.1016/j.jmapro.2019.11.030_bib0330
  article-title: Erosion of surfaces by solid particles
  publication-title: Wear
  doi: 10.1016/0043-1648(60)90055-7
– volume: 1
  start-page: 52
  issue: 3
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0270
  article-title: Abrasive waterjet cutting surfaces of ceramics-an experimental investigation
  publication-title: Int J Adv Sci Eng Technol Res
– start-page: 17
  year: 2003
  ident: 10.1016/j.jmapro.2019.11.030_bib0460
– volume: 1
  start-page: 174
  issue: 3
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0265
  article-title: Analysis of surface roughness in abrasive waterjet cutting of cast iron
  publication-title: Int J Sci Environ Technol
– volume: 54
  start-page: 370
  issue: 4-5
  year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0835
  article-title: Microstructural study of material removal mechanisms observed in abrasive waterjet cutting of calcareous stones
  publication-title: Mater Charact
  doi: 10.1016/j.matchar.2004.12.008
– volume: 11
  start-page: 97
  issue: 2
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0895
  article-title: Characteristics of abrasive waterjet cut-edges and the affect on formability and fatigue performance of high strength steels
  publication-title: J Manuf Process
  doi: 10.1016/j.jmapro.2009.12.001
– volume: 23
  start-page: 1453
  issue: 4
  year: 1988
  ident: 10.1016/j.jmapro.2019.11.030_bib0845
  article-title: Surface characterization of SiC whisker/2124 aluminium and Al 2 O 3 composites machined by abrasive water jet
  publication-title: J Mater Sci
  doi: 10.1007/BF01154616
– volume: 29
  start-page: 532
  issue: 5-6
  year: 2006
  ident: 10.1016/j.jmapro.2019.11.030_bib0200
  article-title: A study on the use of single mesh size abrasives in abrasive waterjet machining
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-005-2536-x
– volume: 265
  start-page: 176
  issue: 1-2
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0230
  article-title: Effect of waterjet formation on surface preparation and profiling of aluminum alloy
  publication-title: Wear
  doi: 10.1016/j.wear.2007.09.008
– volume: 44
  start-page: 1125
  issue: 10
  year: 2004
  ident: 10.1016/j.jmapro.2019.11.030_bib0395
  article-title: Quantitative evaluation of abrasive contamination in ductile material during abrasive water jet machining and minimising with a nozzle head oscillation technique
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2003.12.007
– volume: 266
  start-page: 1091
  issue: 11–12
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0340
  article-title: An erosion-based model for abrasive waterjet turning of ductile materials
  publication-title: Wear
  doi: 10.1016/j.wear.2009.02.008
– year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0920
– volume: 39
  start-page: 855
  issue: 6
  year: 1999
  ident: 10.1016/j.jmapro.2019.11.030_bib0300
  article-title: A study of abrasive waterjet cutting of metallic coated sheet steels
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/S0890-6955(98)00078-9
– volume: 29
  start-page: 1422
  issue: 11–12
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0380
  article-title: Investigation on surface roughness in abrasive water-jet machining by the response surface method
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2014.952020
– volume: 28
  start-page: 11
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0690
  article-title: Surface integrity in tangential turning of hybrid MMC A359/B4C/Al2O3 by abrasive waterjet
  publication-title: J Manuf Process
  doi: 10.1016/j.jmapro.2017.05.017
– volume: 40
  start-page: 7899
  issue: 6
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib1010
  article-title: Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–behnken design
  publication-title: Ceram Int
  doi: 10.1016/j.ceramint.2013.12.137
– volume: 2
  start-page: 99
  year: 2000
  ident: 10.1016/j.jmapro.2019.11.030_bib0520
  article-title: Studies of Micro ice jet machining
  publication-title: Japan Soc Mech Eng
– volume: 42
  start-page: 1297
  issue: 12
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0085
  article-title: Processes and apparatus developments in industrial waterjet applications
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/S0890-6955(02)00069-X
– volume: 149
  start-page: 366
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib1130
  article-title: Abrasive suspension water jet cutting optimization using orthogonal array design
  publication-title: Procedia Eng
  doi: 10.1016/j.proeng.2016.06.680
– volume: 404
  start-page: 33
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0310
  article-title: A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation
  publication-title: Key Eng Mater
  doi: 10.4028/www.scientific.net/KEM.404.33
– volume: 254
  start-page: 763
  issue: 7-8
  year: 2003
  ident: 10.1016/j.jmapro.2019.11.030_bib0475
  article-title: A study on recycling of abrasives in abrasive water jet machining
  publication-title: Wear
  doi: 10.1016/S0043-1648(03)00256-4
– volume: 236
  start-page: 4600
  issue: 18
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0370
  article-title: Finite element analysis of multi-particle impact on erosion in abrasive water jet machining of titanium alloy
  publication-title: J Comput Appl Math
  doi: 10.1016/j.cam.2012.04.022
– volume: 166
  start-page: 55
  issue: 1
  year: 1993
  ident: 10.1016/j.jmapro.2019.11.030_bib0850
  article-title: Hydro-abrasive erosion characteristics of 30vol.% SiCp/6061-T6 Al composite at shallow impact angles
  publication-title: Wear
  doi: 10.1016/0043-1648(93)90279-U
– volume: 128
  start-page: 123
  issue: 1-3
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0405
  article-title: Kerf formation analysis in the abrasive waterjet cutting of industrial ceramics
  publication-title: J Mater Process Technol
  doi: 10.1016/S0924-0136(02)00437-5
– volume: 53
  start-page: 533
  issue: 4
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0180
  article-title: Monitoring of focusing tube wear during abrasive waterjet (AWJ) cutting of AISI 309
  publication-title: Metal
– volume: 26
  start-page: 88
  issue: 1
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0365
  article-title: Optimization of abrasive water jet cutting of ductile materials
  publication-title: J Wuhan Univ Technol-Mater Sci Ed
  doi: 10.1007/s11595-011-0174-8
– volume: 62
  start-page: 555
  issue: 1
  year: 2013
  ident: 10.1016/j.jmapro.2019.11.030_bib0840
  article-title: On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
  publication-title: CIRP Ann Manuf Technol
  doi: 10.1016/j.cirp.2013.03.021
– volume: 7
  start-page: 115
  issue: 2
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0510
  article-title: Feasibility study of cryogenic cutting technology by using a computer simulation and manufacture of main components for cryogenic cutting system
  publication-title: J Nucl Fuel Cycle Waste Technol
– volume: 258
  start-page: 123
  issue: 1–4
  year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0390
  article-title: Characteristics of the surface of a titanium alloy following milling with abrasive waterjets
  publication-title: Wear
  doi: 10.1016/j.wear.2004.04.005
– volume: 97
  start-page: 2255
  issue: 5–8
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0940
  article-title: Machining of biocompatible materials: a review
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-018-1973-2
– volume: 29
  start-page: 648
  issue: 5
  year: 1994
  ident: 10.1016/j.jmapro.2019.11.030_bib0965
  article-title: Liver resection in children, using a water-jet
  publication-title: J Pediatr Surg
  doi: 10.1016/0022-3468(94)90732-3
– volume: 189
  start-page: 292
  issue: 1-3
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0260
  article-title: A study of taper angles and material removal rates of drilled holes in the abrasive water jet machining process
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2007.01.039
– volume: 34
  start-page: 321
  issue: 3
  year: 2019
  ident: 10.1016/j.jmapro.2019.11.030_bib1125
  article-title: Machinability study of abrasive aqua parameters on hybrid metal matrix composite
  publication-title: Mater Manuf Process
  doi: 10.1080/10426914.2018.1544707
– volume: 30
  start-page: 810
  issue: 3
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0100
  article-title: The effect of material type and plate thickness on drilling time of abrasive water jet drilling process
  publication-title: Mater Des
  doi: 10.1016/j.matdes.2008.05.049
– volume: 42
  start-page: 1297
  issue: 12
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0225
  article-title: Processes and apparatus developments in industrial waterjet applications
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/S0890-6955(02)00069-X
– volume: 7
  start-page: 1
  issue: 8
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0495
  article-title: Thermal aspects of ice abrasive water jet technology
  publication-title: Adv Mech Eng
  doi: 10.1177/1687814015597619
– volume: 28
  start-page: 159
  issue: 2
  year: 1998
  ident: 10.1016/j.jmapro.2019.11.030_bib0035
  article-title: Visualization of the abrasive-waterjet cutting process
  publication-title: Exp Mech
  doi: 10.1007/BF02317567
– volume: 53
  start-page: 537
  issue: 4
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0695
  article-title: Abrasive waterjet (AWJ) titanium tangential turning evaluation
  publication-title: Metal
– volume: 73
  start-page: 941
  issue: 5-8
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0320
  article-title: Topography and microstructure of the cutting surface machined with abrasive waterjet
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-014-5869-5
– volume: 32
  start-page: 151
  issue: 2
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0400
  article-title: Investigation of process parameters influence in abrasive water jet cutting of D2 steel
  publication-title: Mater Manuf Process
  doi: 10.1080/10426914.2016.1176183
– volume: 42
  start-page: 615
  issue: 5
  year: 2002
  ident: 10.1016/j.jmapro.2019.11.030_bib0250
  article-title: The effects of system and geometric parameters on abrasive water jet nozzle wear
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/S0890-6955(01)00147-X
– volume: 94
  issue: 5-8
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0640
  article-title: Surface properties and fatigue failure analysis of alloy 718 surfaces milled by abrasive and plain waterjet
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-017-0979-5
– start-page: 19
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0385
– volume: 61
  start-page: 1019
  issue: 9-12
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0440
  article-title: Development of an algorithm for optimum control process to compensate the nozzle wear effect in cutting the hard and tough material using abrasive water jet cutting process
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-011-3761-0
– volume: 39
  start-page: 923
  issue: 6
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0480
  article-title: A study of delamination on graphite/epoxy composites in abrasive waterjet machining
  publication-title: Compos Part A Appl Sci Manuf
  doi: 10.1016/j.compositesa.2008.04.001
– volume: 29
  start-page: 1346
  issue: 11-12
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0135
  article-title: Soluble abrasives for waterjet machining
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2014.930949
– start-page: 21
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0375
  article-title: Regional conference on engineering mathematics, mechanics, manufacturing and architecture
– volume: 7
  start-page: 38
  issue: 1
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0090
  article-title: Multi-objective optimisation of abrasive water jet machining responses by simulated annealing and particle swarm
  publication-title: Int J Mechatron Manuf Syst
– volume: 6
  start-page: 869
  issue: 6
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib1050
  article-title: Optimization of abrasive waterjet machining process parameters on aluminium AL-6061
  publication-title: Int J Sci Res
– volume: 135
  start-page: 1
  issue: 1
  year: 2003
  ident: 10.1016/j.jmapro.2019.11.030_bib0345
  article-title: The effect of cutting jet variation on surface striation formation in abrasive water jet cutting
  publication-title: J Mater Process Technol
  doi: 10.1016/S0924-0136(01)00579-9
– volume: 6
  start-page: 5
  issue: 1
  year: 1963
  ident: 10.1016/j.jmapro.2019.11.030_bib0045
  article-title: A study of erosion phenomena part I
  publication-title: Wear
  doi: 10.1016/0043-1648(63)90003-6
– start-page: 275
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0515
– volume: 111
  start-page: 196
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0910
  article-title: The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2018.02.022
– volume: 23
  start-page: S74
  issue: 1
  year: 1989
  ident: 10.1016/j.jmapro.2019.11.030_bib0960
  article-title: Liver resection using a water jet
  publication-title: Cancer Chemother Pharmacol
  doi: 10.1007/BF00647245
– volume: 159
  start-page: 356
  issue: 3
  year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0165
  article-title: A technical note on grit embedment following abrasive water-jet milling of a titanium alloy
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2004.05.024
– volume: 53
  start-page: 536
  issue: 5
  year: 2000
  ident: 10.1016/j.jmapro.2019.11.030_bib0750
  article-title: Abrasive waterjet peening: a new method of surface preparation for metal orthopedic implants
  publication-title: J Biomed Mater Res
  doi: 10.1002/1097-4636(200009)53:5<536::AID-JBM13>3.0.CO;2-V
– volume: 45
  start-page: 1443
  issue: 12-13
  year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0190
  article-title: A strategy for efficient and quality cutting of materials with abrasive waterjets considering the variation in orifice and focusing nozzle diameter
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2005.01.020
– volume: 1
  start-page: 109
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0285
  article-title: Role of garnet and silicon carbide abrasives in abrasive waterjet cutting of aluminum-silicon carbide particulate metal matrix composites
  publication-title: Int J Appl Res Mech
  doi: 10.47893/IJARME.2011.1022
– start-page: 1
  year: 2001
  ident: 10.1016/j.jmapro.2019.11.030_bib0660
– volume: 7
  start-page: 439
  issue: 4
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0275
  article-title: Effects of process parameters on surface roughness in abrasive waterjet cutting of aluminium
  publication-title: Front Mechn Eng
  doi: 10.1007/s11465-012-0337-0
– volume: 118
  start-page: 555
  issue: 4
  year: 1996
  ident: 10.1016/j.jmapro.2019.11.030_bib0795
  article-title: Monitoring of thermal energy distribution in abrasive waterjet cutting using infrared thermography
  publication-title: J Manuf Sci Eng
  doi: 10.1115/1.2831067
– ident: 10.1016/j.jmapro.2019.11.030_bib0095
– volume: 25
  start-page: 83
  issue: 1
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0720
  article-title: Modeling of Depth/Width of cut for abrasive water jet milling of titanium
  publication-title: J Korean Soc Manuf Technol Eng
– volume: 19
  start-page: 599
  issue: 4
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0105
  article-title: Cut front geometry characterization in cutting applications of brass with abrasive water jet
  publication-title: J Mater Eng Perform
  doi: 10.1007/s11665-009-9513-8
– volume: 202
  start-page: 574
  issue: 1-3
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib1000
  article-title: A study of surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2007.10.024
– volume: 81
  start-page: 671
  issue: 4
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0500
  article-title: Cutting meat with bone using an ultrahigh pressure abrasive waterjet
  publication-title: Meat Sci
  doi: 10.1016/j.meatsci.2008.11.010
– volume: 16
  start-page: 337
  issue: 3
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0355
  article-title: Penetration ability of abrasive waterjets in cutting of aluminum-silicon carbide particulate metal matrix composites
  publication-title: Mach Sci Technol
  doi: 10.1080/10910344.2012.698935
– volume: 44
  start-page: 133
  issue: 2
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0585
  article-title: Experimental investigations on pocket milling of titanium alloy using abrasive water jet machining
  publication-title: FME Transactions
  doi: 10.5937/fmet1602133K
– volume: 95
  start-page: 25
  issue: 1-4
  year: 2010
  ident: 10.1016/j.jmapro.2019.11.030_bib0470
  article-title: Comminution of material particles by water jets—influence of the inner shape of the mixing chamber
  publication-title: Int J Miner Process
  doi: 10.1016/j.minpro.2010.03.003
– volume: 3
  start-page: 1425
  issue: 11
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib1055
  article-title: Modeling and optimization of abrasive waterjet parameters using regression analysis
  publication-title: International Scholarly and Scientific Research & Innovation
– volume: 16
  start-page: 59
  issue: 1
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib1045
  article-title: Application of modelling and optimization methods in abrasive water jet machining
  publication-title: J Trends Dev Machin Assoc Technol
– volume: 62
  start-page: 635
  issue: 5-8
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib1110
  article-title: Application of Taguchi design for quality characterization of abrasive water jet machining of TRIP sheet steels
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-011-3815-3
– volume: 10
  start-page: 32
  issue: 1
  year: 1991
  ident: 10.1016/j.jmapro.2019.11.030_bib0220
  article-title: Surface texture in abrasive waterjet cutting
  publication-title: Int J Ind Manuf Syst Eng
  doi: 10.1016/0278-6125(91)90045-4
– volume: 32
  start-page: 162
  issue: 2
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0325
  article-title: Surface integrity studies on abrasive water jet cutting of AISI D2 steel
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2016.1221093
– volume: 39
  start-page: 211
  issue: 2
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0125
  article-title: Cutting of aluminium alloy by abrasive waterjet
  publication-title: Hung J Ind Chem
– volume: 96
  start-page: 963
  issue: 1-4
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib0560
  article-title: Investigation on flow field of ultrasonic-assisted abrasive waterjet using CFD with discrete phase model
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-018-1635-4
– volume: 73
  start-page: 941
  issue: 5-8
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0820
  article-title: Topography and microstructure of the cutting surface machined with abrasive waterjet
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-014-5869-5
– volume: 71
  start-page: 223
  issue: 2
  year: 2004
  ident: 10.1016/j.jmapro.2019.11.030_bib0955
  article-title: Abrasive water jet cutting as a new procedure for cutting cancellous bone—in vitro testing in comparison with the oscillating saw
  publication-title: J Biomed Mater Res B Appl Biomater
  doi: 10.1002/jbm.b.10078
– volume: 211
  start-page: 959
  issue: 6
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0215
  article-title: Challenges in using waterjet machining of NiTi shape memory alloys: an analysis of controlled-depth milling
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2010.12.015
– start-page: 59
  year: 1979
  ident: 10.1016/j.jmapro.2019.11.030_bib0040
  article-title: Mechanisms of the erosion of metals by solid particles. Erosion: prevention and useful applications
  publication-title: J ASTM Int
– volume: 5
  start-page: 1584
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0255
  article-title: Surface characterization and machining of blind pockets on Ti6Al4V by abrasive water jet machining
  publication-title: Procedia Mater Sci
  doi: 10.1016/j.mspro.2014.07.346
– volume: 78
  start-page: 1361
  issue: 5-8
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib0530
  article-title: A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-014-6528-6
– volume: 29
  start-page: 535
  issue: 4
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0685
  article-title: Optimization of abrasive water jet turning parameters for machining of low-density polyethylene material based on experimental design method
  publication-title: Int Polym Process
  doi: 10.3139/217.2925
– start-page: 236
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib0155
– volume: 58
  start-page: 303
  issue: 1
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0465
  article-title: An integrated monitoring method to supervise waterjet machining
  publication-title: CIRP Ann Manuf Technol
  doi: 10.1016/j.cirp.2009.03.022
– start-page: 568
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0550
  article-title: Experimental study of cryogenically enhanced abrasive Water jet cutting of AISI D2 steel
– volume: 34
  start-page: 330
  issue: 4
  year: 2018
  ident: 10.1016/j.jmapro.2019.11.030_bib1065
  article-title: Investigation of water jet peening process parameters on AL6061-T6
  publication-title: Surf Eng
  doi: 10.1080/02670844.2017.1394564
– volume: 9
  start-page: 47
  issue: 1-2
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0730
  article-title: Hole-drilling using abrasive water jet in titanium
  publication-title: Int J Mach Mach Mater
– volume: 31
  start-page: 6485
  issue: 24
  year: 1996
  ident: 10.1016/j.jmapro.2019.11.030_bib0860
  article-title: Machining refractory ceramics with abrasive water jets
  publication-title: J Mater Sci
  doi: 10.1007/BF00356252
– volume: 32
  start-page: 942
  issue: 9–10
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0615
  article-title: Hole drilling with abrasive fluidjets
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-005-0398-x
– volume: 49
  start-page: 306
  issue: 3
  year: 2007
  ident: 10.1016/j.jmapro.2019.11.030_bib0305
  article-title: Predictive depth of jet penetration models for abrasive waterjet cutting of alumina ceramics
  publication-title: Int J Mech Sci
  doi: 10.1016/j.ijmecsci.2006.09.005
– volume: 181
  start-page: 443
  year: 1995
  ident: 10.1016/j.jmapro.2019.11.030_bib0030
  article-title: Wear models and predictive equations: their form and content
  publication-title: Wear
  doi: 10.1016/0043-1648(95)90158-2
– volume: 29
  start-page: 1422
  issue: 11-12
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0990
  article-title: Investigation on surface roughness in abrasive water-jet machining by the response surface method
  publication-title: Mater Manuf Processes
  doi: 10.1080/10426914.2014.952020
– volume: 17
  start-page: 325
  year: 1988
  ident: 10.1016/j.jmapro.2019.11.030_bib0245
  article-title: Abrasive jet machining of glass at low temperature
  publication-title: J Mech Working Technol
  doi: 10.1016/0378-3804(88)90034-4
– volume: 8
  start-page: 809
  issue: 1
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0435
  article-title: A neuro-genetic approach for selection of process parameters in abrasive waterjet cutting considering variation in diameter of focusing nozzle
  publication-title: Appl Soft Comput
  doi: 10.1016/j.asoc.2007.06.007
– volume: 40
  start-page: 3299
  issue: 11
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib1030
  article-title: Experimental modelling and analysis in abrasive waterjet cutting of ceramic tiles using grey-based response surface methodology
  publication-title: Arabian J Sci Eng
  doi: 10.1007/s13369-015-1775-x
– start-page: 19
  year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0600
– volume: 113
  start-page: 29
  issue: 1
  year: 1991
  ident: 10.1016/j.jmapro.2019.11.030_bib0975
  article-title: Optimization factors in abrasive-waterjet machining
  publication-title: J Inst Eng
– volume: 18
  start-page: 435
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0410
  article-title: Analysis of the kerf angle of the granite machined by abrasive waterjet
  publication-title: Indian J Eng Mater Sci
– year: 2005
  ident: 10.1016/j.jmapro.2019.11.030_bib0735
– volume: 5
  start-page: 86
  issue: 5
  year: 2015
  ident: 10.1016/j.jmapro.2019.11.030_bib1015
  article-title: Optimization MRR of Stainless steel 403 in abrasive water jet machining using ANOVA and Taguchi method
  publication-title: Int J Eng Res Appl
– volume: 3
  start-page: 120
  issue: 1-2
  year: 2008
  ident: 10.1016/j.jmapro.2019.11.030_bib0240
  article-title: Influence of jet impact angle on part geometry in abrasive waterjet turning of aluminium alloys
  publication-title: Int J Mach Mach Mater
– volume: 10
  start-page: 15
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib1060
  article-title: Optimization of abrasive water jet cutting parameter for AISI 316L stainless steel sheet
  publication-title: J Appl Fluid Mech
– volume: 264
  start-page: 1015
  year: 2011
  ident: 10.1016/j.jmapro.2019.11.030_bib0890
  article-title: Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel
  publication-title: Adv Mater Res
  doi: 10.4028/www.scientific.net/AMR.264-265.1015
– volume: 11
  start-page: 143
  issue: 4
  year: 2017
  ident: 10.1016/j.jmapro.2019.11.030_bib1120
  article-title: Optimization of abrasive waterjet machining process parameters
  publication-title: Tehnički glasnik
– start-page: 012020
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib0450
– volume: 49
  start-page: 134
  issue: 2
  year: 2009
  ident: 10.1016/j.jmapro.2019.11.030_bib0625
  article-title: Abrasive waterjet peening with elastic prestress: a parametric evaluation
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2008.10.001
– volume: 30
  start-page: 371
  year: 2016
  ident: 10.1016/j.jmapro.2019.11.030_bib1105
  article-title: Parameter design for cut surface characteristics in abrasive waterjet cutting of Al/SiC/Al2O3 composite using grey theory based RSM
  publication-title: J Mech Sci Technol
  doi: 10.1007/s12206-015-1242-3
– volume: 7
  start-page: 191
  issue: 2
  year: 2003
  ident: 10.1016/j.jmapro.2019.11.030_bib0315
  article-title: An experimental study to enhance the cutting performance in abrasive waterjet machining
  publication-title: Mach Sci Technol
  doi: 10.1081/MST-120022777
– volume: 66
  start-page: 877
  issue: 5-8
  year: 2013
  ident: 10.1016/j.jmapro.2019.11.030_bib0590
  article-title: Identification of the role of machinability and milling depth on machining time in controlled depth milling using abrasive water jet
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-012-4373-z
– volume: 62
  start-page: 157
  issue: 1–4
  year: 2012
  ident: 10.1016/j.jmapro.2019.11.030_bib0935
  article-title: The model of product distortion in AWJ cutting
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-011-3788-2
– volume: 2
  start-page: 82
  issue: 9
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib1020
  article-title: Optimization of abrasive water jet machining process parameters using Taguchi Grey relational analysis
  publication-title: Int J Mech Prod Eng Res Dev
– start-page: 211
  year: 1998
  ident: 10.1016/j.jmapro.2019.11.030_bib0420
– volume: 6
  year: 2014
  ident: 10.1016/j.jmapro.2019.11.030_bib0635
  article-title: Investigation of the effects of machining parameters on material removal rate in abrasive waterjet turning
  publication-title: Adv Mech Eng
  doi: 10.1155/2014/624203
– year: 2013
  ident: 10.1016/j.jmapro.2019.11.030_bib0880
– volume: 217
  start-page: 1709
  issue: 12
  year: 2003
  ident: 10.1016/j.jmapro.2019.11.030_bib0855
  article-title: Machinability of titanium alloy (Ti’6Al’4V) by abrasive waterjets
  publication-title: Proc Inst Mech Eng, Part B: J Eng Manuf
  doi: 10.1243/095440503772680631
SSID ssj0012401
Score 2.6133358
SecondaryResourceType review_article
Snippet Nowadays, advanced machining techniques are widely used for solving various issues in manufacturing operations that include machining high strength materials,...
SourceID crossref
elsevier
SourceType Enrichment Source
Index Database
Publisher
StartPage 271
SubjectTerms Abrasive water jet
Future opportunities
Literature survey
Recent trends
Title Abrasive Water Jet Machining process: A state of art of review
URI https://dx.doi.org/10.1016/j.jmapro.2019.11.030
Volume 49
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LS8NAEF5KvehBfGJ9lD143bZJNpvEgxCKpVbaixZ7C_sKtGhbSrz6253ZJKWCKHgK2ezC5ssy883mm1lCbiOYXaz9kCnTs4zHUjKluGIKfJknhJVCYL7zeCKGUz6ahbMG6de5MCirrGx_adOdta5auhWa3fV83n0GzyOcf04wJHelPzmPcJV3PrcyD3BfvbJmqi8Y9q7T55zGa_EuwU6hwCvpYC1P1EL_5J52XM7giBxWXJGm5XSOScMuT8jBTgXBU3KfQrSLCnT6CqRxQ0e2oGOnj4THdF1mAdzRlLrEIbrKKbwcXsqUlTMyHTy89IesOhKB6SDyCxbkRmlgZLHxrIyFCm2sdQRBpoy5lNYAWcL_gNCueZAnxnq-LwPgXNrmXCY6OCfN5WppLwgNQ7iPlVEcQwrgKbkJI8_0dB75Kg-8FglqJDJd1QvHYyvesloYtshK_DLED0KJDPBrEbYdtS7rZfzRP6pBzr599wxM-q8jL_898ors-xg1u42Ua9IsNh_2BqhFodpu7bTJXvr4NJx8AS0gzjo
linkProvider Elsevier
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LS8NAEF5Ke1AP4hPrcw9e1zavTeJBKEVJnxdb7G3ZV6BF21Li_3cmj1JBFDyFbDKwmYSZb7LffEvIfQizi7QbMGXalvmRlEwpXzEFuczh3ErOsd95NObJ1O_PglmNdKteGKRVlrG_iOl5tC5HWqU3W-v5vPUKmYfn-TnGkhylPxuoThXUSaPTGyTj7WICJK1CNtXlDA2qDrqc5rX4kBCqkOMVP6CcJ9Khf8pQO1nn5YgclnCRdooZHZOaXZ6Qgx0RwVPy1IGCF0no9A1w44b2bUZHOUUSLtN10QjwSDs07x2iq5TC8-Gh6Fo5I9OX50k3YeWuCEx7oZsxLzVKAyiLjGNlxFVgI61DqDNl5EtpDeAlXAqEce17aWys47rSA9ilberLWHvnpL5cLe0FoUEA55EyyseqAqBKaoLQMW2dhq5KPadJvMoTQpeS4bhzxbuouGELUfhPoP-gmhDgvyZhW6t1IZnxx_1h5WTx7dULiOq_Wl7-2_KO7CWT0VAMe-PBFdl3sYjO_6tck3q2-bQ3gDQydVt-SV9RptDr
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Abrasive+Water+Jet+Machining+process%3A+A+state+of+art+of+review&rft.jtitle=Journal+of+manufacturing+processes&rft.au=Natarajan%2C+Yuvaraj&rft.au=Murugesan%2C+Pradeep+Kumar&rft.au=Mohan%2C+Mugilvalavan&rft.au=Liyakath+Ali+Khan%2C+Shakeel+Ahmed&rft.date=2020-01-01&rft.pub=Elsevier+Ltd&rft.issn=1526-6125&rft.eissn=2212-4616&rft.volume=49&rft.spage=271&rft.epage=322&rft_id=info:doi/10.1016%2Fj.jmapro.2019.11.030&rft.externalDocID=S1526612519304219
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1526-6125&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1526-6125&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1526-6125&client=summon