Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
•We produce large aspect ratio stainless steel structures with very good tensile properties.•The flexural tests proved that the cladded layers had very good formability.•The appearance of delta ferrite, which is deleterious to the corrosion properties, was avoided. Laser additive manufacturing of st...
Saved in:
| Published in | Materials in engineering Vol. 55; pp. 526 - 532 |
|---|---|
| Main Authors | , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier Ltd
01.03.2014
|
| Subjects | |
| Online Access | Get full text |
Cover
Loading…
| Abstract | •We produce large aspect ratio stainless steel structures with very good tensile properties.•The flexural tests proved that the cladded layers had very good formability.•The appearance of delta ferrite, which is deleterious to the corrosion properties, was avoided.
Laser additive manufacturing of stainless steels is a promising process for near net shape fabrication of parts requiring good mechanical and corrosion properties with a minimal waste generation. This work focuses on high aspect ratio AISI 316 steel structures made by superposition of sequential layers. A special nozzle for precise powder delivery together with a monomode fiber laser allowed producing high quality steel stringers on AISI 316 steel substrates. Although the stringers average compositions were inside the austenite plus ferrite range, only austenite phase was verified. The cladded structure presented some internal pores and cracks, responsible by the low Young’s moduli. However, the tensile properties were similar to the base material and other literature results. The three-point flexural tests also produced good results in terms of formability. The fabricated structures proved to be useful for use in mechanical construction. |
|---|---|
| AbstractList | •We produce large aspect ratio stainless steel structures with very good tensile properties.•The flexural tests proved that the cladded layers had very good formability.•The appearance of delta ferrite, which is deleterious to the corrosion properties, was avoided.
Laser additive manufacturing of stainless steels is a promising process for near net shape fabrication of parts requiring good mechanical and corrosion properties with a minimal waste generation. This work focuses on high aspect ratio AISI 316 steel structures made by superposition of sequential layers. A special nozzle for precise powder delivery together with a monomode fiber laser allowed producing high quality steel stringers on AISI 316 steel substrates. Although the stringers average compositions were inside the austenite plus ferrite range, only austenite phase was verified. The cladded structure presented some internal pores and cracks, responsible by the low Young’s moduli. However, the tensile properties were similar to the base material and other literature results. The three-point flexural tests also produced good results in terms of formability. The fabricated structures proved to be useful for use in mechanical construction. |
| Author | de Lima, Milton Sergio Fernandes Sankaré, Simon |
| Author_xml | – sequence: 1 givenname: Milton Sergio Fernandes surname: de Lima fullname: de Lima, Milton Sergio Fernandes email: milton@ieav.cta.br organization: Photonics Division, Institute for Advanced Studies, 12228-970 Sao Jose dos Campos, Brazil – sequence: 2 givenname: Simon surname: Sankaré fullname: Sankaré, Simon organization: IREPA LASER, Parc d’Innovation, 67400 Illkirch, France |
| BookMark | eNqFkMtOwzAQRb0oEm3hD1j4BxLsOE8WSFXFo1IRC2BtTewxdZU4yHYr8fcklBUL2MyMjnSuNHdBZm5wSMgVZylnvLzepz1EjSHNGBcjSkc4I3OWlTwRrGzOySKEPWO84jybk92TVX4I0R9UPHik4DTtUe3AWQUdbXEHRzt4OhjaQUBPQWsb7RFpD-5g4NvSdLV52VDBSxoiWNdhCOOF2I3TW_eOPlyQMwNdwMufvSRv93ev68dk-_ywWa-2iRJVFhPRGsMxF1gUvFE5b-um1KJQPGet1lAL1patqQWwSuSNEoaJgoncQM2hYJUSS5Kfcqe3gkcjP7ztwX9KzuTUkNzLU0NyamiiIxy1m1-ashGiHVz0YLv_5NuTjONjR4teBmXRKdTWo4pSD_bvgC-NmooC |
| CitedBy_id | crossref_primary_10_1007_s12613_019_1837_2 crossref_primary_10_1016_j_matpr_2021_02_268 crossref_primary_10_3390_app10093310 crossref_primary_10_1016_j_matchar_2022_112470 crossref_primary_10_1016_j_optlastec_2023_110226 crossref_primary_10_1016_j_msea_2017_12_029 crossref_primary_10_1007_s13632_019_00604_6 crossref_primary_10_1007_s10853_017_1271_7 crossref_primary_10_3390_met11071052 crossref_primary_10_1016_j_triboint_2016_08_037 crossref_primary_10_3390_app9163316 crossref_primary_10_1016_j_optlastec_2018_01_005 crossref_primary_10_1016_j_jmapro_2023_01_035 crossref_primary_10_1007_s12206_020_0717_z crossref_primary_10_1016_j_addma_2019_03_024 crossref_primary_10_1007_s00170_022_09179_z crossref_primary_10_1016_j_cirp_2017_05_009 crossref_primary_10_1016_j_corsci_2019_108425 crossref_primary_10_1134_S0036029516100104 crossref_primary_10_1007_s11665_018_3446_z crossref_primary_10_1080_17452759_2023_2266640 crossref_primary_10_3390_ma18010032 crossref_primary_10_1016_S1875_5372_18_30183_8 crossref_primary_10_1016_j_matdes_2020_108675 crossref_primary_10_1016_j_jallcom_2020_153840 crossref_primary_10_1016_j_optlastec_2018_07_051 crossref_primary_10_1038_nmat5021 crossref_primary_10_1080_00295450_2018_1502001 crossref_primary_10_1016_j_matpr_2017_07_243 crossref_primary_10_1016_j_optlastec_2021_106918 crossref_primary_10_1016_j_phpro_2016_08_094 crossref_primary_10_1016_j_surfin_2017_01_008 crossref_primary_10_1557_jmr_2020_70 crossref_primary_10_1016_j_corsci_2023_111214 crossref_primary_10_1016_j_jmst_2019_09_017 crossref_primary_10_3390_met10020272 crossref_primary_10_1007_s12206_021_2103_x crossref_primary_10_1016_j_jmapro_2021_03_051 crossref_primary_10_1016_j_jmatprotec_2016_04_006 crossref_primary_10_1016_j_matdes_2016_09_043 crossref_primary_10_1016_j_jmrt_2024_03_231 crossref_primary_10_1080_13621718_2022_2115664 crossref_primary_10_1080_09506608_2021_1983351 crossref_primary_10_1016_j_matdes_2015_10_096 crossref_primary_10_1016_j_msea_2017_04_058 crossref_primary_10_4028_www_scientific_net_AMR_974_141 crossref_primary_10_1016_j_electacta_2018_04_188 crossref_primary_10_1016_j_msea_2019_138360 crossref_primary_10_1051_matecconf_201818803014 crossref_primary_10_1177_1464420719894718 crossref_primary_10_1016_j_addma_2021_101981 crossref_primary_10_1115_1_4037302 crossref_primary_10_1007_s00170_015_7481_8 crossref_primary_10_1016_j_precisioneng_2016_05_012 crossref_primary_10_1007_s11665_019_04275_w crossref_primary_10_1016_j_addma_2018_11_014 crossref_primary_10_1007_s11837_025_07304_3 crossref_primary_10_1016_j_matdes_2017_04_078 crossref_primary_10_1016_j_addma_2020_101689 crossref_primary_10_1177_09544062241237408 crossref_primary_10_3365_KJMM_2019_57_5_295 crossref_primary_10_1016_j_apsusc_2015_02_171 crossref_primary_10_1016_j_mtadv_2019_01_001 crossref_primary_10_2320_matertrans_MT_MLA2022015 crossref_primary_10_1007_s00170_020_05644_9 crossref_primary_10_1016_j_matpr_2023_03_333 crossref_primary_10_1007_s11085_020_10005_8 crossref_primary_10_1016_j_matdes_2015_05_064 crossref_primary_10_1179_1743284715Y_0000000134 crossref_primary_10_1007_s40964_024_00885_6 crossref_primary_10_1088_1742_6596_1050_1_012105 crossref_primary_10_1134_S2075113319010404 crossref_primary_10_1108_RPJ_04_2016_0067 crossref_primary_10_1007_s00170_020_05565_7 crossref_primary_10_1007_s11837_024_06491_9 crossref_primary_10_1108_RPJ_04_2016_0068 crossref_primary_10_1088_2053_1591_ad7d6d crossref_primary_10_1007_s00170_018_2083_x crossref_primary_10_1007_s13369_023_08437_w crossref_primary_10_1016_j_msea_2020_140040 crossref_primary_10_1007_s11837_020_04433_9 crossref_primary_10_1016_j_surfin_2018_04_010 crossref_primary_10_1016_j_matdes_2015_08_062 crossref_primary_10_1016_j_msea_2019_04_111 crossref_primary_10_1007_s11663_015_0310_5 crossref_primary_10_1016_j_jmapro_2018_06_033 crossref_primary_10_1016_j_nme_2023_101577 crossref_primary_10_4028_p_7d3yb1 crossref_primary_10_1016_j_actamat_2016_03_019 crossref_primary_10_1016_j_jmapro_2019_10_011 crossref_primary_10_1016_j_conbuildmat_2019_06_132 crossref_primary_10_1007_s11665_024_09173_4 crossref_primary_10_1007_s00170_017_1528_y crossref_primary_10_1016_j_jmrt_2021_09_027 crossref_primary_10_1016_j_matdes_2015_05_078 crossref_primary_10_1007_s13369_024_09070_x crossref_primary_10_1007_s00170_022_09723_x crossref_primary_10_3390_met12122161 crossref_primary_10_1016_j_mtcomm_2022_103372 crossref_primary_10_1080_13621718_2019_1589086 crossref_primary_10_1016_j_addma_2014_10_004 crossref_primary_10_3390_coatings12020258 crossref_primary_10_1016_j_ijplas_2019_05_009 crossref_primary_10_1108_RPJ_08_2018_0189 crossref_primary_10_3390_ma16010065 crossref_primary_10_1016_j_jmapro_2019_07_010 crossref_primary_10_1007_s10853_020_05232_y crossref_primary_10_1007_s40964_020_00160_4 crossref_primary_10_1016_j_matdes_2022_110508 crossref_primary_10_1016_j_matdes_2020_109317 crossref_primary_10_1007_s13632_021_00815_w crossref_primary_10_1007_s11249_020_01316_7 crossref_primary_10_1016_j_msea_2018_11_091 crossref_primary_10_1007_s40516_020_00128_w crossref_primary_10_2464_jilm_72_298 crossref_primary_10_1016_j_matdes_2016_05_034 crossref_primary_10_2351_1_4966052 crossref_primary_10_3390_ma13245670 crossref_primary_10_1007_s10853_015_9565_0 crossref_primary_10_1016_j_addma_2023_103522 crossref_primary_10_1016_j_msea_2015_10_073 crossref_primary_10_1016_j_msea_2024_146255 crossref_primary_10_1007_s00170_023_10814_6 crossref_primary_10_1016_j_matdes_2021_109684 crossref_primary_10_1016_j_matdes_2018_04_058 crossref_primary_10_1016_j_mtcomm_2020_101255 crossref_primary_10_1016_j_optlastec_2019_105586 crossref_primary_10_1016_j_phpro_2017_08_010 crossref_primary_10_1111_ffe_13322 crossref_primary_10_3390_ma14247544 crossref_primary_10_3390_app12136684 crossref_primary_10_1016_j_matchar_2018_04_040 crossref_primary_10_1016_j_msea_2019_04_065 crossref_primary_10_1002_adem_201700952 crossref_primary_10_1016_j_msea_2020_139736 crossref_primary_10_1016_j_jmrt_2024_10_202 crossref_primary_10_3390_ma17010232 crossref_primary_10_1016_j_matdes_2014_08_026 crossref_primary_10_1016_j_msea_2016_12_112 crossref_primary_10_1007_s12008_024_01998_6 crossref_primary_10_1007_s11666_022_01335_x crossref_primary_10_1016_j_addma_2021_102363 crossref_primary_10_1016_j_jmst_2020_11_048 crossref_primary_10_1016_j_msea_2016_09_028 crossref_primary_10_1108_RPJ_12_2019_0320 |
| Cites_doi | 10.1016/j.jmatprotec.2012.10.006 10.1016/j.matdes.2012.08.078 10.1016/j.matdes.2013.03.056 10.2351/1.1356418 10.1016/S0921-5093(98)00960-5 10.1016/S0921-5093(99)00202-6 10.1007/BF02811663 10.1108/13552541211218216 10.1179/095066082790324414 10.1108/13552541211272027 10.1016/j.optlastec.2012.07.002 10.1016/j.actamat.2010.02.004 10.4028/www.scientific.net/AMR.189-193.3664 10.1115/1.1286472 10.1017/S0022112084001981 10.1016/j.jmatprotec.2013.03.014 10.1016/0036-9748(80)90251-3 |
| ContentType | Journal Article |
| Copyright | 2013 Elsevier Ltd |
| Copyright_xml | – notice: 2013 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.matdes.2013.10.016 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EndPage | 532 |
| ExternalDocumentID | 10_1016_j_matdes_2013_10_016 S0261306913009436 |
| GroupedDBID | -~X 4G. 5VS 7-5 8P~ 9JN AABNK AACTN AAEDT AAEDW AAEPC AAKOC AALRI AAOAW AAQXK AAXUO ABEFU ABFNM ABMAC ABXDB ABXRA ABYKQ ACDAQ ACNNM ACRLP ADMUD ADTZH AEBSH AECPX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AIEXJ AIKHN AITUG AJBFU ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR AZFZN BKOJK BLXMC EFJIC EO8 EO9 EP2 EP3 FDB FGOYB FIRID FYGXN G-2 IHE J1W M24 M41 OAUVE Q38 R2- ROL SDF SMS SPC SSM SST SSZ T5K AATTM AAXKI AAYWO AAYXX ABWVN ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFPUW AGCQF AGQPQ AGRNS AIGII AIIUN AKBMS AKRWK AKYEP ANKPU CITATION SSH |
| ID | FETCH-LOGICAL-c372t-3bff1e43e5519c41b896d35c140bdda830b6bf83a07349c3f035034fa81a507c3 |
| IEDL.DBID | AIKHN |
| ISSN | 0261-3069 |
| IngestDate | Tue Jul 01 04:23:11 EDT 2025 Thu Apr 24 23:02:27 EDT 2025 Fri Feb 23 02:25:10 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Lasers Laser additive manufacturing Stainless steels |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c372t-3bff1e43e5519c41b896d35c140bdda830b6bf83a07349c3f035034fa81a507c3 |
| PageCount | 7 |
| ParticipantIDs | crossref_primary_10_1016_j_matdes_2013_10_016 crossref_citationtrail_10_1016_j_matdes_2013_10_016 elsevier_sciencedirect_doi_10_1016_j_matdes_2013_10_016 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | 2014-03-01 |
| PublicationDateYYYYMMDD | 2014-03-01 |
| PublicationDate_xml | – month: 03 year: 2014 text: 2014-03-01 day: 01 |
| PublicationDecade | 2010 |
| PublicationTitle | Materials in engineering |
| PublicationYear | 2014 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Devine, Briant, Drummond (b0020) 1980; 14 Dadbakhsh, Hao, Sewell (b0050) 2012; 18 Li, Li, Zhao, Li, Wang, Huang (b0075) 2011 Takalo, Suutala, Moisio (b0110) 1979; 10 ArticleID=2382. 2011. Acessed in August, 12, 2013. Ion (b0055) 2005 AZOM. Keicher (b0030) 2001 Thijs, Verhaeghe, Craeghs, Humbeeck, Kruth (b0140) 2010; 58 Shahzad, Deckers, Kruth, Vleugels (b0005) 2013; 213 Cullity (b0130) 1978 Man, Wang, Wang, Zeng (b0045) 2013; 45 Kahlen, Kar (b0150) 2001; 13 Guan, Wang, Gao, Li, Zeng (b0070) 2013; 50 Oreper, Szekely (b0085) 1984; 147 ICDD, International Centre for Diffraction Data, Powder Diffraction file number 00-006-0696, 2011. Gaumann, Henry, Cleton, Wagniere, Kurz (b0090) 1999; A271 Yu, Rombouts, Maes (b0115) 2013; 45 Callister (b0080) 2003 ICDD, International Centre for Diffraction Data, Powder diffraction file number 00-052-0512, 2011. DeLong, Ostrom, Szumachowski (b0105) 1956; 35 Freneaux O, Poulet JB, Lepre O, Montavon G. Coaxial nozzle for surface treatment by laser beam, with supply of materials in powder form. European Patent EP0574580 (A1), Filling. 1993, 12-22. Straffelini, Fontanari, Molinari (b0135) 1999; 260 Kahlen, Kar (b0145) 2001; 123 Yang, Lu, Luo, Wang (b0035) 2012; 18 Bi, Sun, Gasser (b0095) 2013; 213 Honeycombe, Bhadeshia (b0010) 1995 Gill DD, Atwood CJ, Voth TE, Robbins J, Dewhurst P, Taggart DG. LENS® and SFF: Enabling technologies for optimized structures, Sandia National Laboratories, Report SAND. 2007; 2007-5340C: p. 428–34. Schaeffler (b0100) 1949; 56 Sedriks (b0015) 1982; 27 Zhang, Wei, Lin, Zhao, Shi (b0040) 2011; 189–193 Oreper (10.1016/j.matdes.2013.10.016_b0085) 1984; 147 DeLong (10.1016/j.matdes.2013.10.016_b0105) 1956; 35 Honeycombe (10.1016/j.matdes.2013.10.016_b0010) 1995 Yang (10.1016/j.matdes.2013.10.016_b0035) 2012; 18 Guan (10.1016/j.matdes.2013.10.016_b0070) 2013; 50 Kahlen (10.1016/j.matdes.2013.10.016_b0145) 2001; 123 Kahlen (10.1016/j.matdes.2013.10.016_b0150) 2001; 13 Gaumann (10.1016/j.matdes.2013.10.016_b0090) 1999; A271 Takalo (10.1016/j.matdes.2013.10.016_b0110) 1979; 10 Ion (10.1016/j.matdes.2013.10.016_b0055) 2005 Bi (10.1016/j.matdes.2013.10.016_b0095) 2013; 213 Keicher (10.1016/j.matdes.2013.10.016_b0030) 2001 Thijs (10.1016/j.matdes.2013.10.016_b0140) 2010; 58 Li (10.1016/j.matdes.2013.10.016_b0075) 2011 Shahzad (10.1016/j.matdes.2013.10.016_b0005) 2013; 213 Dadbakhsh (10.1016/j.matdes.2013.10.016_b0050) 2012; 18 Callister (10.1016/j.matdes.2013.10.016_b0080) 2003 Schaeffler (10.1016/j.matdes.2013.10.016_b0100) 1949; 56 Sedriks (10.1016/j.matdes.2013.10.016_b0015) 1982; 27 Man (10.1016/j.matdes.2013.10.016_b0045) 2013; 45 Zhang (10.1016/j.matdes.2013.10.016_b0040) 2011; 189–193 10.1016/j.matdes.2013.10.016_b0060 Devine (10.1016/j.matdes.2013.10.016_b0020) 1980; 14 10.1016/j.matdes.2013.10.016_b0065 10.1016/j.matdes.2013.10.016_b0120 Yu (10.1016/j.matdes.2013.10.016_b0115) 2013; 45 Cullity (10.1016/j.matdes.2013.10.016_b0130) 1978 10.1016/j.matdes.2013.10.016_b0125 10.1016/j.matdes.2013.10.016_b0025 Straffelini (10.1016/j.matdes.2013.10.016_b0135) 1999; 260 |
| References_xml | – volume: 13 start-page: 60 year: 2001 end-page: 69 ident: b0150 article-title: Residual stresses in laser-deposited metal parts publication-title: J Laser Appl – volume: 189–193 start-page: 3664 year: 2011 end-page: 3667 ident: b0040 article-title: Effects of powder characteristics on selective laser melting of 316L stainless steel powder publication-title: Adv Mat Res – reference: ICDD, International Centre for Diffraction Data, Powder diffraction file number 00-052-0512, 2011. – reference: Freneaux O, Poulet JB, Lepre O, Montavon G. Coaxial nozzle for surface treatment by laser beam, with supply of materials in powder form. European Patent EP0574580 (A1), Filling. 1993, 12-22. – volume: 213 start-page: 463 year: 2013 end-page: 468 ident: b0095 article-title: Study on influential factors for process monitoring and control in laser aided additive manufacturing publication-title: J Mat Proc Technol – year: 2005 ident: b0055 article-title: Laser process eng mater – volume: 18 start-page: 482 year: 2012 end-page: 489 ident: b0035 article-title: Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting publication-title: Rapid Prot J – volume: 260 start-page: 197 year: 1999 end-page: 202 ident: b0135 article-title: True and apparent Young’s modulus in ferrous porous alloys publication-title: Mat Sci Eng A – start-page: 6 year: 2011 ident: b0075 article-title: Influence of welding parameters on weld formation and microstructure of dual-laser beams welded T-joint of aluminum alloy publication-title: Adv Mater Sci Eng – volume: 147 start-page: 53 year: 1984 end-page: 79 ident: b0085 article-title: Heat and fluid-flow phenomena in weld pools publication-title: J Fluid Mech – volume: 45 start-page: 209 year: 2013 end-page: 216 ident: b0045 article-title: Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel publication-title: Optics Laser Technol – year: 1995 ident: b0010 article-title: Steels – microstructure and properties – reference: ICDD, International Centre for Diffraction Data, Powder Diffraction file number 00-006-0696, 2011. – start-page: 561 year: 2001 end-page: 563 ident: b0030 article-title: Laser engineered net shapping process publication-title: LIA handbook of laser materials processing – year: 2003 ident: b0080 article-title: Materials science and engineering: an introduction – volume: 45 start-page: 228 year: 2013 end-page: 235 ident: b0115 article-title: Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition publication-title: Mat Design – volume: 123 start-page: 38 year: 2001 end-page: 44 ident: b0145 article-title: Tensile strengths for laser-fabricated parts and similarity parameters for rapid manufacturing publication-title: J Manuf Sci – volume: A271 start-page: 232 year: 1999 end-page: 241 ident: b0090 article-title: Epitaxial laser metal forming: analysis of microstructure formation publication-title: Mat Sci Eng – volume: 27 start-page: 321 year: 1982 end-page: 353 ident: b0015 article-title: Corrosion resistance of austenitic Fe–Cr–Ni–Mo alloys in marine environments publication-title: Int Mat Reviews – reference: ArticleID=2382. 2011. Acessed in August, 12, 2013. – volume: 10 start-page: 1173 year: 1979 end-page: 1181 ident: b0110 article-title: Austenitic solidification mode in austenitic stainless steel welds publication-title: Met Trans – volume: 213 start-page: 1484 year: 2013 end-page: 1494 ident: b0005 article-title: Additive manufacturing of alumina parts by indirect selective laser sintering and post processing publication-title: J Mat Process Technol – volume: 50 start-page: 581 year: 2013 end-page: 586 ident: b0070 article-title: Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel publication-title: Mater Design – volume: 58 start-page: 3303 year: 2010 end-page: 3312 ident: b0140 article-title: A study of the microstructural evolution during selective laser melting of Ti–6Al–4V publication-title: Acta Mater – year: 1978 ident: b0130 article-title: Elements of X-ray diffraction – volume: 56 year: 1949 ident: b0100 article-title: Construction diagram for stainless steel weld metal publication-title: Met Prog – volume: 18 start-page: 241 year: 2012 end-page: 249 ident: b0050 article-title: Effect of selective laser melting layout on the quality of stainless steel parts publication-title: Rapid Prot J – reference: AZOM. – volume: 14 start-page: 1175 year: 1980 end-page: 1179 ident: b0020 article-title: Mechanism of intergranular corrosion of 316l stainless steel in oxidizing acids publication-title: Scr Metall – reference: Gill DD, Atwood CJ, Voth TE, Robbins J, Dewhurst P, Taggart DG. LENS® and SFF: Enabling technologies for optimized structures, Sandia National Laboratories, Report SAND. 2007; 2007-5340C: p. 428–34. – volume: 35 start-page: 521s year: 1956 end-page: 528s ident: b0105 article-title: Measurement and calculations of ferrite in stainless steel weld metal publication-title: Weld J (AWS) – year: 2003 ident: 10.1016/j.matdes.2013.10.016_b0080 – volume: 213 start-page: 463 issue: 3 year: 2013 ident: 10.1016/j.matdes.2013.10.016_b0095 article-title: Study on influential factors for process monitoring and control in laser aided additive manufacturing publication-title: J Mat Proc Technol doi: 10.1016/j.jmatprotec.2012.10.006 – year: 1978 ident: 10.1016/j.matdes.2013.10.016_b0130 – volume: 45 start-page: 228 year: 2013 ident: 10.1016/j.matdes.2013.10.016_b0115 article-title: Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition publication-title: Mat Design doi: 10.1016/j.matdes.2012.08.078 – start-page: 6 year: 2011 ident: 10.1016/j.matdes.2013.10.016_b0075 article-title: Influence of welding parameters on weld formation and microstructure of dual-laser beams welded T-joint of aluminum alloy publication-title: Adv Mater Sci Eng – volume: 50 start-page: 581 year: 2013 ident: 10.1016/j.matdes.2013.10.016_b0070 article-title: Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel publication-title: Mater Design doi: 10.1016/j.matdes.2013.03.056 – start-page: 561 year: 2001 ident: 10.1016/j.matdes.2013.10.016_b0030 article-title: Laser engineered net shapping process – volume: 13 start-page: 60 issue: 2 year: 2001 ident: 10.1016/j.matdes.2013.10.016_b0150 article-title: Residual stresses in laser-deposited metal parts publication-title: J Laser Appl doi: 10.2351/1.1356418 – volume: 260 start-page: 197 issue: 1–2 year: 1999 ident: 10.1016/j.matdes.2013.10.016_b0135 article-title: True and apparent Young’s modulus in ferrous porous alloys publication-title: Mat Sci Eng A doi: 10.1016/S0921-5093(98)00960-5 – volume: 56 issue: 5 year: 1949 ident: 10.1016/j.matdes.2013.10.016_b0100 article-title: Construction diagram for stainless steel weld metal publication-title: Met Prog – ident: 10.1016/j.matdes.2013.10.016_b0120 – ident: 10.1016/j.matdes.2013.10.016_b0125 – year: 1995 ident: 10.1016/j.matdes.2013.10.016_b0010 – volume: A271 start-page: 232 year: 1999 ident: 10.1016/j.matdes.2013.10.016_b0090 article-title: Epitaxial laser metal forming: analysis of microstructure formation publication-title: Mat Sci Eng doi: 10.1016/S0921-5093(99)00202-6 – year: 2005 ident: 10.1016/j.matdes.2013.10.016_b0055 – volume: 10 start-page: 1173 year: 1979 ident: 10.1016/j.matdes.2013.10.016_b0110 article-title: Austenitic solidification mode in austenitic stainless steel welds publication-title: Met Trans doi: 10.1007/BF02811663 – volume: 18 start-page: 241 issue: 3 year: 2012 ident: 10.1016/j.matdes.2013.10.016_b0050 article-title: Effect of selective laser melting layout on the quality of stainless steel parts publication-title: Rapid Prot J doi: 10.1108/13552541211218216 – volume: 27 start-page: 321 year: 1982 ident: 10.1016/j.matdes.2013.10.016_b0015 article-title: Corrosion resistance of austenitic Fe–Cr–Ni–Mo alloys in marine environments publication-title: Int Mat Reviews doi: 10.1179/095066082790324414 – ident: 10.1016/j.matdes.2013.10.016_b0060 – volume: 18 start-page: 482 year: 2012 ident: 10.1016/j.matdes.2013.10.016_b0035 article-title: Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting publication-title: Rapid Prot J doi: 10.1108/13552541211272027 – volume: 45 start-page: 209 year: 2013 ident: 10.1016/j.matdes.2013.10.016_b0045 article-title: Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel publication-title: Optics Laser Technol doi: 10.1016/j.optlastec.2012.07.002 – ident: 10.1016/j.matdes.2013.10.016_b0025 – volume: 35 start-page: 521s issue: 11 year: 1956 ident: 10.1016/j.matdes.2013.10.016_b0105 article-title: Measurement and calculations of ferrite in stainless steel weld metal publication-title: Weld J (AWS) – volume: 58 start-page: 3303 year: 2010 ident: 10.1016/j.matdes.2013.10.016_b0140 article-title: A study of the microstructural evolution during selective laser melting of Ti–6Al–4V publication-title: Acta Mater doi: 10.1016/j.actamat.2010.02.004 – volume: 189–193 start-page: 3664 year: 2011 ident: 10.1016/j.matdes.2013.10.016_b0040 article-title: Effects of powder characteristics on selective laser melting of 316L stainless steel powder publication-title: Adv Mat Res doi: 10.4028/www.scientific.net/AMR.189-193.3664 – volume: 123 start-page: 38 issue: 1 year: 2001 ident: 10.1016/j.matdes.2013.10.016_b0145 article-title: Tensile strengths for laser-fabricated parts and similarity parameters for rapid manufacturing publication-title: J Manuf Sci doi: 10.1115/1.1286472 – volume: 147 start-page: 53 year: 1984 ident: 10.1016/j.matdes.2013.10.016_b0085 article-title: Heat and fluid-flow phenomena in weld pools publication-title: J Fluid Mech doi: 10.1017/S0022112084001981 – ident: 10.1016/j.matdes.2013.10.016_b0065 – volume: 213 start-page: 1484 year: 2013 ident: 10.1016/j.matdes.2013.10.016_b0005 article-title: Additive manufacturing of alumina parts by indirect selective laser sintering and post processing publication-title: J Mat Process Technol doi: 10.1016/j.jmatprotec.2013.03.014 – volume: 14 start-page: 1175 year: 1980 ident: 10.1016/j.matdes.2013.10.016_b0020 article-title: Mechanism of intergranular corrosion of 316l stainless steel in oxidizing acids publication-title: Scr Metall doi: 10.1016/0036-9748(80)90251-3 |
| SSID | ssj0017112 |
| Score | 2.4713333 |
| Snippet | •We produce large aspect ratio stainless steel structures with very good tensile properties.•The flexural tests proved that the cladded layers had very good... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 526 |
| SubjectTerms | Laser additive manufacturing Lasers Stainless steels |
| Title | Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers |
| URI | https://dx.doi.org/10.1016/j.matdes.2013.10.016 |
| Volume | 55 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1La8JAEF6sXtpD6ZPaF3voNdVk183mKNKiLXqxgrewT2rRKFb_f2fyEAulhd6SJRPC7Gb2m51vZgh5MCbWUjJwS0RkAh5pE2imO4GUvm2FT6SWmDs8HIn-hL9MO9Ma6VW5MEirLG1_YdNza12OtEpttlazWWuM3gMA3gQDMgln4oA0IpYIWNqN7uC1P9oFE-IwD3qWRy0iqTLocpoX4ELrsG53yB6R5oWNz3_aofZ2necTclzCRdotvuiU1Fx2Ro72igiek_chcuqKOrDbtaMqs3ThMKEX9U-rPHy69BSQsltTpBChkaMLlW0xsQGkLO0OxgPKQkHzhKo5GEC4cm5OsbEHHv19XpDJ89Nbrx-U_RMCw-JoEzDtfeg4c4CKEsNDLRNhWceAT6WtVTBDWmgvmYLfnCeGeYwyMu6VDBXARMMuST1bZu6KUPSiwPXiRljLHTglPgLPUXEl2g5e024SVuksNWVxcexxMU8rFtlHWmg6RU3jKAw2SbCTWhXFNf54Pq6mI_22SFKw_79KXv9b8oYcwh0vaGe3pA6z6e4Ah2z0fbnOvgB7ddwx |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LT8JAEJ4gHNSD8RnxuQevFcouy_ZIiATkcQETb033FTFQDML_d4a2RhOjibdm22ma2e3s9-28AO6MaWmlONIS2TCBaGgTaK6bgVK-bqWPlFaUOzway96TeHxuPpegU-TCUFhlbvszm7611vlILddm7W02q02IPSDgjcghEwkud6BC1amaZai0-4Pe-NOZ0Aq3Ts_8qEVGRQbdNswLcaF1VLc75PcU5kWNz3_aob7sOt1DOMjhImtnX3QEJZcew_6XIoIn8DKimLqsDuxm5ViSWrZwlNBL-mdFHj5beoZI2a0YhRCRkWOLJN1QYgNKWdbuT_qMh5JtE6rmaADxyrk5o8YedPT3fgpP3Ydppxfk_RMCw1uNdcC196ET3CEqiowItYqk5U2DnEpbm-AMaam94gn-5iIy3JOXkQufqDBBmGj4GZTTZerOgRGLQuoljLRWOCQlvoHMMRGJrDt8Tb0KvNBZbPLi4tTjYh4XUWSvcabpmDRNozhYheBT6i0rrvHH861iOuJviyRG-_-r5MW_JW9htzcdDeNhfzy4hD28I7IQtCso48y6a8Qka32Tr7kP5H7fFw |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Microstructure+and+mechanical+behavior+of+laser+additive+manufactured+AISI+316+stainless+steel+stringers&rft.jtitle=Materials+in+engineering&rft.au=de+Lima%2C+Milton+Sergio+Fernandes&rft.au=Sankar%C3%A9%2C+Simon&rft.date=2014-03-01&rft.pub=Elsevier+Ltd&rft.issn=0261-3069&rft.volume=55&rft.spage=526&rft.epage=532&rft_id=info:doi/10.1016%2Fj.matdes.2013.10.016&rft.externalDocID=S0261306913009436 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0261-3069&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0261-3069&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0261-3069&client=summon |