Effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of a new C–Cr–Mo–V alloy steel used in TBM cutter ring
Tunnel boring machine (TBM) cutter ring material is a type of C–Cr–Mo–V alloy steel which possesses high hardness and wear resistance. To systematically study the effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of TBM cutter ring, a new C–Cr–Mo...
Saved in:
| Published in | Journal of materials research and technology Vol. 20; pp. 195 - 209 |
|---|---|
| Main Authors | , , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier
01.09.2022
|
| Subjects | |
| Online Access | Get full text |
Cover
Loading…
| Abstract | Tunnel boring machine (TBM) cutter ring material is a type of C–Cr–Mo–V alloy steel which possesses high hardness and wear resistance. To systematically study the effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of TBM cutter ring, a new C–Cr–Mo–V alloy steel (DB3) was subjected to tempering treatment and abrasive wear test. The results indicate that the tempering temperature controlled the hardness and toughness by adjusting the amount of precipitates and austenite transformation. Outstanding mechanical properties were obtained upon tempering at 520 °C. The wear resistance of DB3 steel was mainly controlled by hardness under non-impact abrasive wear condition. However, under the condition of impact abrasive wear, the wear resistance of DB3 steel was affected by hardness and toughness, and only in a certain range of toughness, the wear resistance increased with the increase of hardness. The experimental results can provide some reference for the heat treatment process of DB3 steel used in TBM cutter ring. |
|---|---|
| AbstractList | Tunnel boring machine (TBM) cutter ring material is a type of C–Cr–Mo–V alloy steel which possesses high hardness and wear resistance. To systematically study the effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of TBM cutter ring, a new C–Cr–Mo–V alloy steel (DB3) was subjected to tempering treatment and abrasive wear test. The results indicate that the tempering temperature controlled the hardness and toughness by adjusting the amount of precipitates and austenite transformation. Outstanding mechanical properties were obtained upon tempering at 520 °C. The wear resistance of DB3 steel was mainly controlled by hardness under non-impact abrasive wear condition. However, under the condition of impact abrasive wear, the wear resistance of DB3 steel was affected by hardness and toughness, and only in a certain range of toughness, the wear resistance increased with the increase of hardness. The experimental results can provide some reference for the heat treatment process of DB3 steel used in TBM cutter ring. |
| Author | Liu, Yue Liu, Chunming Jiang, Jinzhe |
| Author_xml | – sequence: 1 givenname: Jinzhe surname: Jiang fullname: Jiang, Jinzhe – sequence: 2 givenname: Yue surname: Liu fullname: Liu, Yue – sequence: 3 givenname: Chunming surname: Liu fullname: Liu, Chunming |
| BookMark | eNo9kU1u1TAQx70oEqX0AqzmALxgO47jLOGpQKVWbApba-KM-xIl8ZPt16o77sAVOBknwaEVm_nS6Dcf_zfsbA0rMfZO8EpwoT9M1bTEXEkuZcV1JRp9xs6lrM2uNY16zS5Tmjjnouk0N-Kc_b7ynlyG4CHTcqQ4rvcvEeZTJAgr5APBMroYUo4nt1Xfw0LugOvocIZjDKU7j5QA1wGwj5jGB4JHwgg9HfBhDHEbgLDSI-z__Py1j8XchmJ-AM5zeIKUiWY4JRpgXOHu0y24U84UYVvoLXvlcU50-eIv2PfPV3f7r7ubb1-u9x9vdq5u2rxrfGuElEjEe-McNso7g9x3TnvFCY3RRoumZH3dda3krm-x6xR3NLiaD_UFu37mDgEne4zjgvHJBhztv0KI9xbLoW4mq6j1qlNO874AZIuy6ZTulJF14QpdWPKZtf0tRfL_eYLbTSo72U0qu0llubZFqvovg3eRZw |
| CitedBy_id | crossref_primary_10_1007_s11223_024_00617_9 crossref_primary_10_1016_j_ceramint_2023_11_250 crossref_primary_10_1016_j_engfailanal_2023_107783 crossref_primary_10_1016_j_wear_2024_205246 crossref_primary_10_1016_j_engfailanal_2024_108508 crossref_primary_10_1016_j_jmatprotec_2023_118078 crossref_primary_10_1007_s42243_024_01234_1 crossref_primary_10_1016_j_jmrt_2023_01_003 crossref_primary_10_3390_ma16031093 crossref_primary_10_1016_j_wear_2023_204943 crossref_primary_10_1007_s11665_024_09591_4 crossref_primary_10_1016_j_jmrt_2023_06_236 crossref_primary_10_1002_srin_202200824 crossref_primary_10_1016_j_wear_2024_205361 |
| Cites_doi | 10.1007/s12206-015-0425-2 10.1016/j.wear.2015.02.019 10.1088/2051-672X/ab8501 10.1016/j.eng.2020.02.016 10.3390/app9204231 10.1016/j.matdes.2020.109378 10.1016/j.wear.2004.09.008 10.1016/j.jmrt.2020.03.038 10.1016/j.jmrt.2020.04.075 10.1080/09500839.2016.1250966 10.1016/j.msea.2017.05.060 10.1007/s12206-016-0329-9 10.1007/s40544-020-0415-y 10.1016/j.triboint.2011.03.005 10.1016/j.tust.2021.104000 10.1016/j.tust.2018.12.010 10.1016/j.msea.2017.05.094 10.1016/S1006-706X(11)60118-0 10.1007/s11661-015-2843-2 10.1016/j.eng.2017.09.004 10.1016/j.actamat.2010.06.055 10.1016/j.triboint.2013.09.021 10.1016/j.wear.2017.09.020 10.1016/j.msea.2016.07.092 10.1016/j.wear.2019.203098 10.1016/j.wear.2020.203190 10.1007/s12205-020-2208-2 10.1016/j.tust.2018.08.050 10.1016/j.tust.2018.02.012 10.1007/BF02644066 10.1016/j.msea.2005.02.038 10.1002/mawe.201700205 10.1016/j.msea.2020.140026 10.1016/j.mattod.2016.07.002 10.3390/ma12101724 10.3390/met7010012 10.1016/j.wear.2010.10.070 10.3390/met9010045 10.1038/122475a0 10.1016/j.msea.2016.12.019 10.1016/j.wear.2017.01.072 10.1016/j.wear.2019.03.028 10.1038/s41598-019-53772-4 10.1016/j.tust.2018.06.035 10.1016/j.msea.2018.05.099 10.1016/j.msea.2020.139520 10.1007/s11661-006-0035-9 10.1080/10402004.2018.1442895 10.1007/s11661-017-4232-5 10.1016/j.wear.2012.12.016 10.1016/j.matchar.2018.07.038 10.1016/j.matpr.2021.01.361 10.1016/j.jmst.2019.01.009 10.1016/j.scriptamat.2020.03.036 10.1016/j.msea.2021.141193 10.1016/0956-716X(93)90191-T 10.1088/2053-1591/abe019 10.1016/j.wear.2017.12.016 |
| ContentType | Journal Article |
| DBID | AAYXX CITATION DOA |
| DOI | 10.1016/j.jmrt.2022.06.156 |
| DatabaseName | CrossRef DOAJ Directory of Open Access Journals |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| Database_xml | – sequence: 1 dbid: DOA name: DOAJ Directory of Open Access Journals url: https://www.doaj.org/ sourceTypes: Open Website |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EndPage | 209 |
| ExternalDocumentID | oai_doaj_org_article_4e7f494c60b94027a259469482320c16 10_1016_j_jmrt_2022_06_156 |
| GroupedDBID | 0R~ 0SF 4.4 457 5VS 6I. AACTN AAEDT AAEDW AAFTH AAIKJ AALRI AAXUO AAYXX ABMAC ABXRA ACGFS ADBBV ADCUG ADEZE ADVLN AEXQZ AFJKZ AFTJW AGHFR AITUG ALMA_UNASSIGNED_HOLDINGS AMRAJ BCNDV CITATION EBS EJD FDB FNPLU GROUPED_DOAJ GX1 HH5 HZ~ IPNFZ IXB KQ8 M41 NCXOZ O9- OK1 RIG ROL SSZ |
| ID | FETCH-LOGICAL-c357t-5f78122aee0b8cca54fc8a0f9c6f40ea8868615c6fb399720cb7a9940cedc30d3 |
| IEDL.DBID | DOA |
| ISSN | 2238-7854 |
| IngestDate | Tue Oct 22 14:59:11 EDT 2024 Thu Sep 26 21:30:24 EDT 2024 |
| IsDoiOpenAccess | true |
| IsOpenAccess | true |
| IsPeerReviewed | true |
| IsScholarly | true |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c357t-5f78122aee0b8cca54fc8a0f9c6f40ea8868615c6fb399720cb7a9940cedc30d3 |
| OpenAccessLink | https://doaj.org/article/4e7f494c60b94027a259469482320c16 |
| PageCount | 15 |
| ParticipantIDs | doaj_primary_oai_doaj_org_article_4e7f494c60b94027a259469482320c16 crossref_primary_10_1016_j_jmrt_2022_06_156 |
| PublicationCentury | 2000 |
| PublicationDate | 2022-09-00 2022-09-01 |
| PublicationDateYYYYMMDD | 2022-09-01 |
| PublicationDate_xml | – month: 09 year: 2022 text: 2022-09-00 |
| PublicationDecade | 2020 |
| PublicationTitle | Journal of materials research and technology |
| PublicationYear | 2022 |
| Publisher | Elsevier |
| Publisher_xml | – name: Elsevier |
| References | Zhang (10.1016/j.jmrt.2022.06.156_bib21) 2019; 35 Lin (10.1016/j.jmrt.2022.06.156_bib10) 2020; 24 Saha (10.1016/j.jmrt.2022.06.156_bib20) 2016; 673 Gao (10.1016/j.jmrt.2022.06.156_bib35) 2020; 184 Wen (10.1016/j.jmrt.2022.06.156_bib25) 2019; 9 Haiko (10.1016/j.jmrt.2022.06.156_bib23) 2019; 9 Jumov (10.1016/j.jmrt.2022.06.156_bib40) 1976; 7 Farrokh (10.1016/j.jmrt.2022.06.156_bib7) 2021; 114 Jin (10.1016/j.jmrt.2022.06.156_bib13) 2018; 81 Singh (10.1016/j.jmrt.2022.06.156_bib51) 2010; 58 Armetti (10.1016/j.jmrt.2022.06.156_bib3) 2018; 77 He (10.1016/j.jmrt.2022.06.156_bib46) 2005; 397 Zhang (10.1016/j.jmrt.2022.06.156_bib63) 2020; 10 Qiu (10.1016/j.jmrt.2022.06.156_bib67) 2017; 269 Chintha (10.1016/j.jmrt.2022.06.156_bib61) 2019; 428–429 Jiao (10.1016/j.jmrt.2022.06.156_bib43) 2017; 20 Bahl (10.1016/j.jmrt.2022.06.156_bib49) 2021; 198 Sun (10.1016/j.jmrt.2022.06.156_bib8) 2019; 85 Xu (10.1016/j.jmrt.2022.06.156_bib60) 2014; 70 Xie (10.1016/j.jmrt.2022.06.156_bib37) 2017; 97 Singh (10.1016/j.jmrt.2022.06.156_bib66) 2015; 328 Kang (10.1016/j.jmrt.2022.06.156_bib54) 2017; 7 Yuan (10.1016/j.jmrt.2022.06.156_bib41) 2017; 700 Zhang (10.1016/j.jmrt.2022.06.156_bib50) 2018; 730 Su (10.1016/j.jmrt.2022.06.156_bib6) 2020; 446–447 Lin (10.1016/j.jmrt.2022.06.156_bib12) 2017; 378–379 Lin (10.1016/j.jmrt.2022.06.156_bib11) 2018; 61 Dong (10.1016/j.jmrt.2022.06.156_bib33) 2017; 683 Ma (10.1016/j.jmrt.2022.06.156_bib68) 2021; 8 Christiansen (10.1016/j.jmrt.2022.06.156_bib52) 2019; 9 Coronado (10.1016/j.jmrt.2022.06.156_bib48) 2013; 301 Zhang (10.1016/j.jmrt.2022.06.156_bib29) 2021; 814 Kurdumoff (10.1016/j.jmrt.2022.06.156_bib39) 1928; 122 Haiko (10.1016/j.jmrt.2022.06.156_bib64) 2018; 400 Wei (10.1016/j.jmrt.2022.06.156_bib30) 2011; 44 Özbek (10.1016/j.jmrt.2022.06.156_bib38) 2020; 9 Zhang (10.1016/j.jmrt.2022.06.156_bib5) 2018; 82 Tian (10.1016/j.jmrt.2022.06.156_bib9) 2020; 8 Rehan (10.1016/j.jmrt.2022.06.156_bib36) 2017; 48 Wang (10.1016/j.jmrt.2022.06.156_bib18) 2020; 9 Zhang (10.1016/j.jmrt.2022.06.156_bib45) 2018; 144 Coronado (10.1016/j.jmrt.2022.06.156_bib34) 2011; 270 Umantsev (10.1016/j.jmrt.2022.06.156_bib47) 1993; 29 Elbaz (10.1016/j.jmrt.2022.06.156_bib14) 2021; 7 Veerababu (10.1016/j.jmrt.2022.06.156_bib44) 2015; 46 Zhang (10.1016/j.jmrt.2022.06.156_bib65) 2017; 392 Geng (10.1016/j.jmrt.2022.06.156_bib2) 2015; 29 Bahrami (10.1016/j.jmrt.2022.06.156_bib16) 2005; 258 Geng (10.1016/j.jmrt.2022.06.156_bib4) 2016; 30 Liu (10.1016/j.jmrt.2022.06.156_bib32) 2011; 18 Zhang (10.1016/j.jmrt.2022.06.156_bib42) 2017; 698 Merlini (10.1016/j.jmrt.2022.06.156_bib1) 2018; 4 Xia (10.1016/j.jmrt.2022.06.156_bib19) 2019; 50 Wei (10.1016/j.jmrt.2022.06.156_bib26) 2011; 44 Haiko (10.1016/j.jmrt.2022.06.156_bib24) 2019; 440–441 Zhang (10.1016/j.jmrt.2022.06.156_bib31) 2020; 796 Dhokey (10.1016/j.jmrt.2022.06.156_bib15) 2021; 43 Yan (10.1016/j.jmrt.2022.06.156_bib22) 2020; 787 Liu (10.1016/j.jmrt.2022.06.156_bib55) 2019; 12 Zheng (10.1016/j.jmrt.2022.06.156_bib28) 2021; 9 Kim (10.1016/j.jmrt.2022.06.156_bib27) 2006; 7 Jagota (10.1016/j.jmrt.2022.06.156_bib17) 2018; 40 Tang (10.1016/j.jmrt.2022.06.156_bib62) 2013; 661 |
| References_xml | – volume: 29 start-page: 2047 issue: 5 year: 2015 ident: 10.1016/j.jmrt.2022.06.156_bib2 article-title: Comparison of the mechanical performance between two-stage and flat-face cutter head for the rock tunnel boring machine (TBM) publication-title: J Mech Sci Technol doi: 10.1007/s12206-015-0425-2 contributor: fullname: Geng – volume: 328 start-page: 206 year: 2015 ident: 10.1016/j.jmrt.2022.06.156_bib66 article-title: Microstructure evolution and abrasive wear behavior of D2 steel publication-title: Wear doi: 10.1016/j.wear.2015.02.019 contributor: fullname: Singh – volume: 8 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib9 article-title: Wear performance and mechanisms of H13 steels sliding against different Rock types publication-title: Surf Topogr Metrol Prop doi: 10.1088/2051-672X/ab8501 contributor: fullname: Tian – volume: 7 start-page: 238 issue: 2 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib14 article-title: Prediction of disc cutter life during shield tunneling with AI via the incorporation of a genetic algorithm into a GMDH-type neural network publication-title: Engineering doi: 10.1016/j.eng.2020.02.016 contributor: fullname: Elbaz – volume: 9 start-page: 4231 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib23 article-title: The effect of tempering on the microstructure and mechanical properties of a novel 0.4C press-hardening steel publication-title: Appl Sci doi: 10.3390/app9204231 contributor: fullname: Haiko – volume: 198 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib49 article-title: Aging behavior and strengthening mechanisms of coarsening resistant metastable θ' precipitates in an Al-Cu alloy publication-title: Mater Des doi: 10.1016/j.matdes.2020.109378 contributor: fullname: Bahl – volume: 258 start-page: 846 year: 2005 ident: 10.1016/j.jmrt.2022.06.156_bib16 article-title: Effects of conventional heat treatment on wear resistance of AISI H13 tool steel publication-title: Wear doi: 10.1016/j.wear.2004.09.008 contributor: fullname: Bahrami – volume: 9 start-page: 9442 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib38 article-title: Effects of cryogenic treatment types on the performance of coated tungsten tools in the turning of AISI H11 steel publication-title: J Mater Res Technol doi: 10.1016/j.jmrt.2020.03.038 contributor: fullname: Özbek – volume: 9 start-page: 6712 issue: 3 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib18 article-title: Evolution of microstructure and mechanical properties during tempering of M50 steel with bainite/martensite duplex structure publication-title: J Mater Res Technol doi: 10.1016/j.jmrt.2020.04.075 contributor: fullname: Wang – volume: 97 start-page: 372 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib37 article-title: Effect of deep cryogenic treatment on carbon segregation in Cr8Mo2SiV tool steel during tempering publication-title: Philos Mag Lett doi: 10.1080/09500839.2016.1250966 contributor: fullname: Xie – volume: 698 start-page: 152 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib42 article-title: Microstructure and mechanical properties of Cr14 ultra-high-strength steel at different tempering temperatures around 773 K publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2017.05.060 contributor: fullname: Zhang – volume: 30 start-page: 1733 issue: 4 year: 2016 ident: 10.1016/j.jmrt.2022.06.156_bib4 article-title: Numerical and experimental research on the rock-breaking process of tunnel boring machine normal disc cutters publication-title: J Mech Sci Technol doi: 10.1007/s12206-016-0329-9 contributor: fullname: Geng – volume: 9 start-page: 1378 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib28 article-title: Effect of interaction between cementite and pearlite on two-body abrasive wear behaviors in white cast iron publication-title: Friction doi: 10.1007/s40544-020-0415-y contributor: fullname: Zheng – volume: 44 start-page: 898 issue: 7–8 year: 2011 ident: 10.1016/j.jmrt.2022.06.156_bib30 article-title: Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel publication-title: Tribol Int doi: 10.1016/j.triboint.2011.03.005 contributor: fullname: Wei – volume: 114 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib7 article-title: Cutter change time and cutter consumption for rock TBMs publication-title: Tunn Undergr Space Technol doi: 10.1016/j.tust.2021.104000 contributor: fullname: Farrokh – volume: 85 start-page: 92 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib8 article-title: A practical TBM cutter wear prediction model for disc cutter life and rock wear ability publication-title: Tunn Undergr Space Technol doi: 10.1016/j.tust.2018.12.010 contributor: fullname: Sun – volume: 700 start-page: 592 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib41 article-title: The effect of carbon content on the c/a ratio of as-quenched martensite in Fe-C alloys publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2017.05.094 contributor: fullname: Yuan – volume: 18 start-page: 60 issue: 11 year: 2011 ident: 10.1016/j.jmrt.2022.06.156_bib32 article-title: Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel publication-title: J Iron Steel Res Int doi: 10.1016/S1006-706X(11)60118-0 contributor: fullname: Liu – volume: 46 start-page: 2455 year: 2015 ident: 10.1016/j.jmrt.2022.06.156_bib44 article-title: Investigation of clusters in medium carbon secondary hardening ultra-high-strength steel after hardening and aging treatments publication-title: Metall Mater Trans A doi: 10.1007/s11661-015-2843-2 contributor: fullname: Veerababu – volume: 4 start-page: 235 issue: 2 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib1 article-title: The Ceneri base tunnel: construction experience with the southern portion of the flat railway line crossing the Swiss Alps publication-title: Engineering doi: 10.1016/j.eng.2017.09.004 contributor: fullname: Merlini – volume: 58 start-page: 5797 year: 2010 ident: 10.1016/j.jmrt.2022.06.156_bib51 article-title: Mechanisms of Guiniere-Preston zone hardening in the athermal limit publication-title: Acta Mater doi: 10.1016/j.actamat.2010.06.055 contributor: fullname: Singh – volume: 70 start-page: 34 year: 2014 ident: 10.1016/j.jmrt.2022.06.156_bib60 article-title: Effects of carbon content and sliding ratio on wear behavior of high-vanadium high-speedsteel (HVHSS) under high-stress rolling–sliding contact publication-title: Tribol Int doi: 10.1016/j.triboint.2013.09.021 contributor: fullname: Xu – volume: 392 start-page: 109 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib65 article-title: Experimental study on wear behaviors of TBM disc cutter ring under drying, water and seawater conditions publication-title: Wear doi: 10.1016/j.wear.2017.09.020 contributor: fullname: Zhang – volume: 673 start-page: 467 year: 2016 ident: 10.1016/j.jmrt.2022.06.156_bib20 article-title: Effects of tempering mode on the structural changes of martensite publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2016.07.092 contributor: fullname: Saha – volume: 440–441 start-page: 203098 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib24 article-title: Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels publication-title: Wear doi: 10.1016/j.wear.2019.203098 contributor: fullname: Haiko – volume: 446–447 start-page: 203190 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib6 article-title: Analysis and prediction of TBM disc cutter wear when tunneling in hard rock strata: a case study of a metro tunnel excavation in Shenzhen, China publication-title: Wear doi: 10.1016/j.wear.2020.203190 contributor: fullname: Su – volume: 10 start-page: 1 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib63 article-title: Repetitive impact wear behaviors of the tempered 25Cr3Mo2NiWV Fe-based steel publication-title: Coatings contributor: fullname: Zhang – volume: 24 start-page: 3145 issue: 10 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib10 article-title: Wear characteristics of TBM disc cutter ring sliding against different types of rock publication-title: KSCE J Civil Eng doi: 10.1007/s12205-020-2208-2 contributor: fullname: Lin – volume: 82 start-page: 346 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib5 article-title: Experimental study on wear of TBM disc cutter rings with different kinds of hardness publication-title: Tunn Undergr Space Technol doi: 10.1016/j.tust.2018.08.050 contributor: fullname: Zhang – volume: 77 start-page: 115 issue: 6 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib3 article-title: Geological and mechanical rock mass conditions for TBM performance prediction. The case of “La Maddalena” exploratory tunnel, Chiomonte (Italy) publication-title: Tunn Undergr Space Technol doi: 10.1016/j.tust.2018.02.012 contributor: fullname: Armetti – volume: 7 start-page: 999 year: 1976 ident: 10.1016/j.jmrt.2022.06.156_bib40 article-title: Martensite crystal lattice, mechanism of austenite-martensite transformation and behavior of carbon atoms in martensite publication-title: Metall Mater Trans A doi: 10.1007/BF02644066 contributor: fullname: Jumov – volume: 397 start-page: 297 year: 2005 ident: 10.1016/j.jmrt.2022.06.156_bib46 article-title: Effect of carbides on the creep properties of a Ni-base superalloy M963 publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2005.02.038 contributor: fullname: He – volume: 50 start-page: 197 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib19 article-title: Influence of nickel on secondary hardening of a modified AISI H13 hot work die steel publication-title: Materialwiss Werkst doi: 10.1002/mawe.201700205 contributor: fullname: Xia – volume: 796 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib31 article-title: Effect of carbon content on microstructural evolution of 8Cr steel in austenitizing process publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2020.140026 contributor: fullname: Zhang – volume: 20 start-page: 142 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib43 article-title: Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era publication-title: Mater Today doi: 10.1016/j.mattod.2016.07.002 contributor: fullname: Jiao – volume: 12 start-page: 1724 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib55 article-title: The evolution of complex carbide precipitates in a low alloy Cr–Mo–V steel after long-term aging treatment publication-title: Materials doi: 10.3390/ma12101724 contributor: fullname: Liu – volume: 7 start-page: 12 issue: 1 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib54 article-title: Microstructural and mechanical characteristics of novel 6% Cr cold-work tool steel publication-title: Metals doi: 10.3390/met7010012 contributor: fullname: Kang – volume: 270 start-page: 287 year: 2011 ident: 10.1016/j.jmrt.2022.06.156_bib34 article-title: Effect of (Fe,Cr)(7)C(3) carbide orientation on abrasion wear resistance and fracture toughness publication-title: Wear doi: 10.1016/j.wear.2010.10.070 contributor: fullname: Coronado – volume: 9 start-page: 45 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib25 article-title: Effect of Tempering temperature on microstructures and wear behavior of a 500 HB grade wear-resistant steel publication-title: Metals doi: 10.3390/met9010045 contributor: fullname: Wen – volume: 122 start-page: 475 year: 1928 ident: 10.1016/j.jmrt.2022.06.156_bib39 article-title: X-ray studies of the structure of quenched carbon steel publication-title: Nature doi: 10.1038/122475a0 contributor: fullname: Kurdumoff – volume: 40 start-page: 1 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib17 article-title: Interpreting H13 steel wear behavior for austenitizing temperature, tempering time and temperature publication-title: J Braz Soc Mech Sci contributor: fullname: Jagota – volume: 683 start-page: 215 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib33 article-title: Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2016.12.019 contributor: fullname: Dong – volume: 378–379 start-page: 1 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib12 article-title: Experimental study of specific matching characteristics of tunnel boring machine cutter ring properties and rock publication-title: Wear doi: 10.1016/j.wear.2017.01.072 contributor: fullname: Lin – volume: 44 start-page: 898 year: 2011 ident: 10.1016/j.jmrt.2022.06.156_bib26 article-title: Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel publication-title: Tribol Int doi: 10.1016/j.triboint.2011.03.005 contributor: fullname: Wei – volume: 428–429 start-page: 430 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib61 article-title: Role of fracture toughness in impact-abrasion wear publication-title: Wear doi: 10.1016/j.wear.2019.03.028 contributor: fullname: Chintha – volume: 9 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib52 article-title: Nano-scale characterisation of sheared β" precipitates in a deformed Al-Mg-Si alloy publication-title: Sci Rep doi: 10.1038/s41598-019-53772-4 contributor: fullname: Christiansen – volume: 661 start-page: 65 year: 2013 ident: 10.1016/j.jmrt.2022.06.156_bib62 article-title: Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels publication-title: Tribol Int contributor: fullname: Tang – volume: 81 start-page: 209 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib13 article-title: Analysis of the settlement of an existing tunnel induced by shield tunneling underneath publication-title: Tunn Undergr Space Technol doi: 10.1016/j.tust.2018.06.035 contributor: fullname: Jin – volume: 730 start-page: 41 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib50 article-title: Effect of solid-solution temperature on the microstructure and properties of ultra-high-strength ferrium S53® steel publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2018.05.099 contributor: fullname: Zhang – volume: 787 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib22 article-title: Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2020.139520 contributor: fullname: Yan – volume: 7 start-page: 633 year: 2006 ident: 10.1016/j.jmrt.2022.06.156_bib27 article-title: Effects of heat treatment on wear resistance and fracture toughness of duo-cast materials composed of high chromium white cast iron and low-chromium steel publication-title: Metall Mater Trans A doi: 10.1007/s11661-006-0035-9 contributor: fullname: Kim – volume: 61 start-page: 920 issue: 5 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib11 article-title: Experimental study on wear behaviors of TBM disc cutter ring in hard rock conditions publication-title: Tribol Trans doi: 10.1080/10402004.2018.1442895 contributor: fullname: Lin – volume: 48 start-page: 5233 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib36 article-title: Retained austenite transformation during heat treatment of a 5wt.% Cr cold work tool steel publication-title: Metall Mater Trans A doi: 10.1007/s11661-017-4232-5 contributor: fullname: Rehan – volume: 301 start-page: 82 issue: 1–2 year: 2013 ident: 10.1016/j.jmrt.2022.06.156_bib48 article-title: Effect of particle hardness on mild–severe wear transition of hard second phase materials publication-title: Wear doi: 10.1016/j.wear.2012.12.016 contributor: fullname: Coronado – volume: 144 start-page: 393 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib45 article-title: Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel publication-title: Mater Charact doi: 10.1016/j.matchar.2018.07.038 contributor: fullname: Zhang – volume: 269 year: 2017 ident: 10.1016/j.jmrt.2022.06.156_bib67 article-title: Wear behaviour of iron matrix composite reinforced by ZTA particles in impact abrasion publication-title: Mater Sci Eng contributor: fullname: Qiu – volume: 43 start-page: 3006 issue: 5 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib15 article-title: Effect of tempering and cryogenic treatment on wear and mechanical properties of hot work tool steel (H13) publication-title: Mater Today Proc doi: 10.1016/j.matpr.2021.01.361 contributor: fullname: Dhokey – volume: 35 start-page: 1240 year: 2019 ident: 10.1016/j.jmrt.2022.06.156_bib21 article-title: Effect of tempering temperature on the microstructure and properties of ultrahigh-strength stainless steel publication-title: J Mater Sci Technol doi: 10.1016/j.jmst.2019.01.009 contributor: fullname: Zhang – volume: 184 start-page: 12 year: 2020 ident: 10.1016/j.jmrt.2022.06.156_bib35 article-title: Role of retained austenite with different morphologies on sub-surface fatigue crack initiation in advanced bainitic steels publication-title: Scr Mater doi: 10.1016/j.scriptamat.2020.03.036 contributor: fullname: Gao – volume: 814 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib29 article-title: Impact of short range ordering on the anomalous four-stage strain hardening behavior of low solid-solution hardening Ni–Cr alloys publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2021.141193 contributor: fullname: Zhang – volume: 29 start-page: 1135 year: 1993 ident: 10.1016/j.jmrt.2022.06.156_bib47 article-title: Ostwald ripening in multicomponent alloys publication-title: Scr Metall Mater doi: 10.1016/0956-716X(93)90191-T contributor: fullname: Umantsev – volume: 8 year: 2021 ident: 10.1016/j.jmrt.2022.06.156_bib68 article-title: Effect of matrix hardness on the impact abrasive wear performance of ZTAp/steel architecture composite publication-title: Mater Res Express doi: 10.1088/2053-1591/abe019 contributor: fullname: Ma – volume: 400 start-page: 21 year: 2018 ident: 10.1016/j.jmrt.2022.06.156_bib64 article-title: Comparison of impact-abrasive wear characteristics and performance of direct quenched (DQ) and direct quenched and partitioned (DQ&P) steels publication-title: Wear doi: 10.1016/j.wear.2017.12.016 contributor: fullname: Haiko |
| SSID | ssj0001596081 |
| Score | 2.3842943 |
| Snippet | Tunnel boring machine (TBM) cutter ring material is a type of C–Cr–Mo–V alloy steel which possesses high hardness and wear resistance. To systematically study... |
| SourceID | doaj crossref |
| SourceType | Open Website Aggregation Database |
| StartPage | 195 |
| SubjectTerms | Abrasive wear Microstructure TBM cutter ring Tempering |
| Title | Effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of a new C–Cr–Mo–V alloy steel used in TBM cutter ring |
| URI | https://doaj.org/article/4e7f494c60b94027a259469482320c16 |
| Volume | 20 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV3NSsQwEA6yXvQg_uL6xxy8aTHdJml6dBdFhNXLKouXkqYJKG5XVkW8-Q6-gk_mkzjTdKU3L15CG0ob8g2db9qZbxg7NF75xKVF1LOZjISSJtI94yL0XJY0fkqdUe3w8Epd3IjLsRy3Wn1RTliQBw4bdyJc6kUmrOJFhrFOapCvY0gnNFIBbuMgts2zVjAV6oORmdcdStH96SjVUjQVMyG562Eyo0TKXo_EO2PqXt3ySi3x_trLnK-ylYYewmlY1hpbcNU6W26JBm6wryA4DFMPpCtVzzZHtUgnTCtAVgcTSrUL8rA4ewwTR0W-hAk80Rf4GUmpgqlKMBgxUxY7vKHZw7xwnx5gAFk3DL4_PgczHIZTHG6B_tW_A5qHe4TXZ1fCfQWj_hBs3fQaaEGb7Ob8bDS4iJpeC5FNZPoSSZ-iq0eUHC80oiqFt9pwn1nlBXdGa6WR_OBZkVCtLbdFajJExLrSJrxMtlinmlZum4F3Ji5jJW2ZYfQokRCZpBAuVqXHl4ePu-xovtf5U5DUyOe5Zg85IZMTMjlXOSLTZX2C4_dKksOuJ9BI8sZI8r-MZOc_brLLlmhdIcFsj3UQQLePjOSlOKiN74AtXg3G13c_fbzhKw |
| link.rule.ids | 315,783,787,867,2109,27936,27937 |
| linkProvider | Directory of Open Access Journals |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effect+of+tempering+temperature+on+the+microstructure%2C+mechanical+properties+and+abrasive+wear+behavior+of+a+new+C%E2%80%93Cr%E2%80%93Mo%E2%80%93V+alloy+steel+used+in+TBM+cutter+ring&rft.jtitle=Journal+of+materials+research+and+technology&rft.au=Jinzhe+Jiang&rft.au=Yue+Liu&rft.au=Chunming+Liu&rft.date=2022-09-01&rft.pub=Elsevier&rft.issn=2238-7854&rft.volume=20&rft.spage=195&rft.epage=209&rft_id=info:doi/10.1016%2Fj.jmrt.2022.06.156&rft.externalDBID=DOA&rft.externalDocID=oai_doaj_org_article_4e7f494c60b94027a259469482320c16 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=2238-7854&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=2238-7854&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=2238-7854&client=summon |