Evaluation of Fracture Toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating
A study on mechanical and fracture properties, through the experimentation techniques has been carried out on a Al 7075-T6 and it coated with an Electroless Nickel deposits of 10–20μm in coating thickness. In the recent years there has been considerable interest in the Electroless Nickel plating due...
Saved in:
| Published in | Procedia engineering Vol. 97; pp. 178 - 185 |
|---|---|
| Main Authors | , , , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier Ltd
2014
|
| Subjects | |
| Online Access | Get full text |
Cover
Loading…
| Abstract | A study on mechanical and fracture properties, through the experimentation techniques has been carried out on a Al 7075-T6 and it coated with an Electroless Nickel deposits of 10–20μm in coating thickness. In the recent years there has been considerable interest in the Electroless Nickel plating due to its extensive use in electronics, automobiles, aerospace and other industries. Electroless Nickel plating is a controlled autocatalytic reduction of nickel ions using suitable reducing agent such as sodium hypophosphite. ASTM Standard – E 399 for plane strain fracture toughness determination was adhered in this investigation. The results obtained, show that the EN coating can give rise to a significant improvement in the fracture behavior (performance) of the substrate and also it has shown that EN coating exhibit a very good adhesive property to the alloy material when the tensile stresses exceeding the yield strength are applied to the system and performance of these pretreatments was studied by SEM analysis. |
|---|---|
| AbstractList | A study on mechanical and fracture properties, through the experimentation techniques has been carried out on a Al 7075-T6 and it coated with an Electroless Nickel deposits of 10–20μm in coating thickness. In the recent years there has been considerable interest in the Electroless Nickel plating due to its extensive use in electronics, automobiles, aerospace and other industries. Electroless Nickel plating is a controlled autocatalytic reduction of nickel ions using suitable reducing agent such as sodium hypophosphite. ASTM Standard – E 399 for plane strain fracture toughness determination was adhered in this investigation. The results obtained, show that the EN coating can give rise to a significant improvement in the fracture behavior (performance) of the substrate and also it has shown that EN coating exhibit a very good adhesive property to the alloy material when the tensile stresses exceeding the yield strength are applied to the system and performance of these pretreatments was studied by SEM analysis. |
| Author | Kumar, S. Mohan Pramod, R. Govindaraju, H.K. Kumar, M.E. Shashi |
| Author_xml | – sequence: 1 givenname: S. Mohan surname: Kumar fullname: Kumar, S. Mohan organization: Amrita Vishwa Vidyapeetham University, Bangalore – 560035, India – sequence: 2 givenname: R. surname: Pramod fullname: Pramod, R. organization: Amrita Vishwa Vidyapeetham University, Bangalore – 560035, India – sequence: 3 givenname: M.E. Shashi surname: Kumar fullname: Kumar, M.E. Shashi organization: Amrita Vishwa Vidyapeetham University, Bangalore – 560035, India – sequence: 4 givenname: H.K. surname: Govindaraju fullname: Govindaraju, H.K. email: mohanssbg@gmail.com organization: BMS Institute of Technology, Bangalore – 560064, India |
| BookMark | eNp9kM1OwzAQhC0EEqX0DTj4AUiwnThOLkhV1QJS-TmUs-XY29YltSs7Kerbk6gcOLGXHWl3RqPvBl067wChO0pSSmjxsEsPwYPbpIzQPKUsZTm5QCNaCpEIwsvLP_oaTWLckWEEYZyOkJ0fVdOp1nqH_RovgtJtFwCvfLfZOogRK2fwK-itclarBn8Ef4DQWojD_7Tp9tZ1-140_oQFEfwerwr8bdstfrP6Cxo8832829yiq7VqIkx-9xh9Luar2XOyfH96mU2Xic44axNeCEY1VRxKoSsApQyvWVnVtdK5zgwl_dlkma7zyiie04qYsuCCUKGyqs6yMcrPuTr4GAOs5SHYvQonSYkciMmdPBOTAzFJmeyJ9bbHsw36bkcLQUZtwWkwNoBupfH2_4AfQQV4FQ |
| CitedBy_id | crossref_primary_10_32628_IJSRST218540 crossref_primary_10_1080_2374068X_2023_2184573 crossref_primary_10_1016_j_matpr_2018_02_329 crossref_primary_10_1016_j_matpr_2018_10_343 crossref_primary_10_1016_j_matpr_2018_10_342 crossref_primary_10_1016_j_matpr_2019_05_143 crossref_primary_10_1016_j_matpr_2018_10_340 crossref_primary_10_1520_JTE20180138 crossref_primary_10_1007_s11668_021_01235_2 crossref_primary_10_1088_1757_899X_376_1_012085 crossref_primary_10_2478_fas_2021_0011 crossref_primary_10_7735_ksmte_2016_25_3_211 crossref_primary_10_1016_j_jallcom_2019_01_245 crossref_primary_10_12693_APhysPolA_132_926 crossref_primary_10_1016_j_matchar_2017_03_024 crossref_primary_10_3390_nano11113039 crossref_primary_10_1016_j_matpr_2023_06_255 crossref_primary_10_1515_bsmm_2017_0011 crossref_primary_10_1007_s11041_019_00422_1 crossref_primary_10_2320_matertrans_MT_C2023009 crossref_primary_10_7735_ksmte_2022_31_6_460 crossref_primary_10_3390_met8090732 crossref_primary_10_1115_1_4045165 crossref_primary_10_1088_2053_1591_ac433b crossref_primary_10_1007_s11668_024_01917_7 crossref_primary_10_1680_jemmr_16_00112 crossref_primary_10_1080_00202967_2018_1477265 crossref_primary_10_1155_2022_8409750 crossref_primary_10_3390_ma16093313 |
| Cites_doi | 10.1007/s11665-009-9545-0 10.1016/j.matdes.2009.10.015 10.1023/B:JMSC.0000031473.19334.5b 10.1016/S0257-8972(05)80023-4 10.1016/S0925-8388(03)00069-0 10.1016/j.surfcoat.2006.09.045 10.1007/BF00354438 10.1016/j.ijfatigue.2005.12.005 10.1016/S0142-1123(01)00122-0 10.1179/sur.2004.20.2.103 10.1520/JTE11609J 10.1016/0376-4583(82)90011-5 10.1016/j.surfcoat.2004.01.038 10.1016/0025-5416(85)90426-4 10.1016/j.engfailanal.2004.09.005 10.1016/j.wear.2005.02.052 |
| ContentType | Journal Article |
| Copyright | 2014 The Authors |
| Copyright_xml | – notice: 2014 The Authors |
| DBID | 6I. AAFTH AAYXX CITATION |
| DOI | 10.1016/j.proeng.2014.12.240 |
| DatabaseName | ScienceDirect Open Access Titles Elsevier:ScienceDirect:Open Access CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1877-7058 |
| EndPage | 185 |
| ExternalDocumentID | 10_1016_j_proeng_2014_12_240 S1877705814032998 |
| GroupedDBID | --K 0R~ 0SF 1B1 4.4 457 5VS 6I. 71M AACTN AAEDT AAEDW AAFTH AAFWJ AAIKJ AALRI AAQFI AAXUO ABMAC ACGFS ADBBV ADEZE ADMUD AEXQZ AFTJW AGHFR AITUG ALMA_UNASSIGNED_HOLDINGS AMRAJ E3Z EBS EJD EP3 FDB FEDTE FNPLU HVGLF HZ~ IXB KQ8 M41 M~E NCXOZ O-L O9- OK1 OZT P2P RIG ROL SES SSZ XH2 AAYXX ADVLN AKRWK CITATION |
| ID | FETCH-LOGICAL-c352t-56721c1a5e87c9eeaad5b289bbac4c3d1021cd33cb49da54190d8657017a39b33 |
| IEDL.DBID | IXB |
| ISSN | 1877-7058 |
| IngestDate | Fri Aug 23 00:31:32 EDT 2024 Fri Feb 23 02:18:26 EST 2024 |
| IsDoiOpenAccess | true |
| IsOpenAccess | true |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | SEM analysis Electroless Nickel coating Fracture behavior 7075-T6 aluminum alloy |
| Language | English |
| License | http://creativecommons.org/licenses/by-nc-nd/4.0 |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c352t-56721c1a5e87c9eeaad5b289bbac4c3d1021cd33cb49da54190d8657017a39b33 |
| OpenAccessLink | https://www.sciencedirect.com/science/article/pii/S1877705814032998 |
| PageCount | 8 |
| ParticipantIDs | crossref_primary_10_1016_j_proeng_2014_12_240 elsevier_sciencedirect_doi_10_1016_j_proeng_2014_12_240 |
| PublicationCentury | 2000 |
| PublicationDate | 2014 2014-00-00 |
| PublicationDateYYYYMMDD | 2014-01-01 |
| PublicationDate_xml | – year: 2014 text: 2014 |
| PublicationDecade | 2010 |
| PublicationTitle | Procedia engineering |
| PublicationYear | 2014 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Krishnaveni, Sankara Narayanan, Seshadri (bib0095) 2005; 190 Brenner and G.E. Riddell, Proceedings of the American Electroplaters Society, Vol 33, 1946. K. Rrunelli, M. Dabala, C. Martini, Surface hardening of Al 7075 alloy by diffusion treatments of electrolytic Ni coatings: 2006, pp37-40. Armyanov, Vangelova, Stoyanchev (bib0065) 1982; 17 Dabalà, Brunelli, Frattini, Magrini (bib0020) 2004; 20 A. Brenner and G.E. Riddell, Proceedings of the American Electroplaters Society, Vol 34, 1947. Ramalho, Miranda (bib0080) 2005; 259 Wernick, Pinner, Sheasby (bib0090) 1996; 5 Hafiz (bib0105) 1996 Clark, Coughran, Traina (bib0005) 2005 Govindaraju, Jayaraj, Sadanandarao, Venkatesha (bib0015) 2010 Batezzati, Kusy, Rizzi, Ronto (bib0050) 2004; 39 Guo, Keong, Sha (bib0075) 2003; 358 Takacs, Sziráki, Török, Sályom, Gácsi, Gál-Solymos (bib0085) 2007; 201 Lo, Tsai, Lee, Hung (bib0070) 1994; 67 Jothi Sudagar, K. Venkateswarlu, Jainshe Lian, Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P in different pretreatment condtion: Journal of Materials Engineering and Performance, 2009. Puchi-Cabrera, Villalobos (bib0055) 2006 McLellan (bib0010) 1980; 8 ASM publications. ASM International. Jpedev, vol 28: 2007, pp. 453-458. DeBartolo, Hillberry (bib0040) 2001; 23 Lai, Ferguson (bib0100) 1985 10.1016/j.proeng.2014.12.240_bib0060 Lai (10.1016/j.proeng.2014.12.240_bib0100) 1985 Hafiz (10.1016/j.proeng.2014.12.240_bib0105) 1996 Dabalà (10.1016/j.proeng.2014.12.240_bib0020) 2004; 20 10.1016/j.proeng.2014.12.240_bib0035 10.1016/j.proeng.2014.12.240_bib0045 Takacs (10.1016/j.proeng.2014.12.240_bib0085) 2007; 201 Ramalho (10.1016/j.proeng.2014.12.240_bib0080) 2005; 259 10.1016/j.proeng.2014.12.240_bib0030 Wernick (10.1016/j.proeng.2014.12.240_bib0090) 1996; 5 DeBartolo (10.1016/j.proeng.2014.12.240_bib0040) 2001; 23 Clark (10.1016/j.proeng.2014.12.240_bib0005) 2005 Govindaraju (10.1016/j.proeng.2014.12.240_bib0015) 2010 McLellan (10.1016/j.proeng.2014.12.240_bib0010) 1980; 8 Batezzati (10.1016/j.proeng.2014.12.240_bib0050) 2004; 39 Guo (10.1016/j.proeng.2014.12.240_bib0075) 2003; 358 Puchi-Cabrera (10.1016/j.proeng.2014.12.240_bib0055) 2006 Lo (10.1016/j.proeng.2014.12.240_bib0070) 1994; 67 Krishnaveni (10.1016/j.proeng.2014.12.240_bib0095) 2005; 190 10.1016/j.proeng.2014.12.240_bib0025 Armyanov (10.1016/j.proeng.2014.12.240_bib0065) 1982; 17 |
| References_xml | – start-page: 1854 year: 2006 end-page: 1866 ident: bib0055 article-title: Fatigue behavior of a 7075-T6 aluminum alloy coated with an electroless Ni-P deposit publication-title: International Journal of Fatigue contributor: fullname: Villalobos – volume: 5 start-page: 2 year: 1996 end-page: 4 ident: bib0090 article-title: The Surface Treatment and Finishing of Aluminum and Its Alloys. ASM International publication-title: Materials Park contributor: fullname: Sheasby – volume: 23 start-page: 79 year: 2001 end-page: 86 ident: bib0040 publication-title: Int J Fatigue contributor: fullname: Hillberry – volume: 67 start-page: 27 year: 1994 end-page: 35 ident: bib0070 article-title: Role of Phosphorus in the Electrochemical Behavior of Electroless Ni-P Alloys in 3.5 publication-title: J. Surface Coat. Technol. contributor: fullname: Hung – year: 1996 ident: bib0105 article-title: Fracture toughness of eutectic Al-Si casting alloy with different microstructural features publication-title: Journal of Materials Science contributor: fullname: Hafiz – volume: 190 start-page: 115 year: 2005 end-page: 121 ident: bib0095 article-title: Electroless Ni–B Coatings: Preparation and Evaluation of Hardness and Wear Resistance publication-title: J. Surf. Coat. Technol. contributor: fullname: Seshadri – volume: 17 start-page: 89 year: 1982 end-page: 100 ident: bib0065 article-title: Pretreatment of Al-Mg Alloys for Electro deposition by Immersion Zinc and Electroless Nickel publication-title: J. Surf. Technol. contributor: fullname: Stoyanchev – start-page: 520 year: 2005 end-page: 526 ident: bib0005 article-title: On the correlation of mechanical and physical properties of 7075-T6 Al alloy publication-title: Engineering Failure Analysis contributor: fullname: Traina – volume: 201 year: 2007 ident: bib0085 article-title: Effects of Pre-treatments on the Corrosion Properties of Electroless Ni–P Layers Deposited on AlMg2 Alloy publication-title: J. Surf. Coat. Technol. contributor: fullname: Gál-Solymos – volume: 20 start-page: 103 year: 2004 end-page: 106 ident: bib0020 publication-title: Surf. Eng. contributor: fullname: Magrini – start-page: 133 year: 1985 end-page: 138 ident: bib0100 article-title: Fracture Toughness of Aluminium Alloy 7075 –T6 in the As –cast condition publication-title: Materials Science and Engineering contributor: fullname: Ferguson – volume: 39 start-page: 3927 year: 2004 end-page: 3934 ident: bib0050 article-title: Devitrification of Al-Ni-Rare earth amorphous alloys publication-title: Journal of Materials Science contributor: fullname: Ronto – start-page: 24 year: 2010 end-page: 29 ident: bib0015 article-title: Evaluation of Mechanical Properties of as-cast Al-Zn-Ce Alloy publication-title: Materials and design contributor: fullname: Venkatesha – volume: 259 start-page: 828 year: 2005 end-page: 834 ident: bib0080 article-title: Friction and Wear of Electroless NiP and NiP + PTFE Coatings publication-title: J. Wear contributor: fullname: Miranda – volume: 358 start-page: 112 year: 2003 end-page: 119 ident: bib0075 article-title: Crystallisation and Phase Transformation Behaviour of Electroless Nickel Phosphorus Platings during Continuous Heating publication-title: J. Alloys Compd. contributor: fullname: Sha – volume: 8 start-page: 170 year: 1980 end-page: 176 ident: bib0010 article-title: Tensile properties of A357-T6 aluminum casting publication-title: Journal of Testing Evaluation contributor: fullname: McLellan – ident: 10.1016/j.proeng.2014.12.240_bib0045 – ident: 10.1016/j.proeng.2014.12.240_bib0060 doi: 10.1007/s11665-009-9545-0 – volume: 5 start-page: 2 year: 1996 ident: 10.1016/j.proeng.2014.12.240_bib0090 article-title: The Surface Treatment and Finishing of Aluminum and Its Alloys. ASM International publication-title: Materials Park contributor: fullname: Wernick – start-page: 24 year: 2010 ident: 10.1016/j.proeng.2014.12.240_bib0015 article-title: Evaluation of Mechanical Properties of as-cast Al-Zn-Ce Alloy publication-title: Materials and design doi: 10.1016/j.matdes.2009.10.015 contributor: fullname: Govindaraju – ident: 10.1016/j.proeng.2014.12.240_bib0030 – volume: 39 start-page: 3927 year: 2004 ident: 10.1016/j.proeng.2014.12.240_bib0050 article-title: Devitrification of Al-Ni-Rare earth amorphous alloys publication-title: Journal of Materials Science doi: 10.1023/B:JMSC.0000031473.19334.5b contributor: fullname: Batezzati – volume: 67 start-page: 27 year: 1994 ident: 10.1016/j.proeng.2014.12.240_bib0070 article-title: Role of Phosphorus in the Electrochemical Behavior of Electroless Ni-P Alloys in 3.5wt.% NaCl Solutions publication-title: J. Surface Coat. Technol. doi: 10.1016/S0257-8972(05)80023-4 contributor: fullname: Lo – volume: 358 start-page: 112 year: 2003 ident: 10.1016/j.proeng.2014.12.240_bib0075 article-title: Crystallisation and Phase Transformation Behaviour of Electroless Nickel Phosphorus Platings during Continuous Heating publication-title: J. Alloys Compd. doi: 10.1016/S0925-8388(03)00069-0 contributor: fullname: Guo – volume: 201 year: 2007 ident: 10.1016/j.proeng.2014.12.240_bib0085 article-title: Effects of Pre-treatments on the Corrosion Properties of Electroless Ni–P Layers Deposited on AlMg2 Alloy publication-title: J. Surf. Coat. Technol. doi: 10.1016/j.surfcoat.2006.09.045 contributor: fullname: Takacs – year: 1996 ident: 10.1016/j.proeng.2014.12.240_bib0105 article-title: Fracture toughness of eutectic Al-Si casting alloy with different microstructural features publication-title: Journal of Materials Science doi: 10.1007/BF00354438 contributor: fullname: Hafiz – ident: 10.1016/j.proeng.2014.12.240_bib0035 – start-page: 1854 year: 2006 ident: 10.1016/j.proeng.2014.12.240_bib0055 article-title: Fatigue behavior of a 7075-T6 aluminum alloy coated with an electroless Ni-P deposit publication-title: International Journal of Fatigue doi: 10.1016/j.ijfatigue.2005.12.005 contributor: fullname: Puchi-Cabrera – volume: 23 start-page: 79 year: 2001 ident: 10.1016/j.proeng.2014.12.240_bib0040 publication-title: Int J Fatigue doi: 10.1016/S0142-1123(01)00122-0 contributor: fullname: DeBartolo – volume: 20 start-page: 103 year: 2004 ident: 10.1016/j.proeng.2014.12.240_bib0020 publication-title: Surf. Eng. doi: 10.1179/sur.2004.20.2.103 contributor: fullname: Dabalà – volume: 8 start-page: 170 issue: 4 year: 1980 ident: 10.1016/j.proeng.2014.12.240_bib0010 article-title: Tensile properties of A357-T6 aluminum casting publication-title: Journal of Testing Evaluation doi: 10.1520/JTE11609J contributor: fullname: McLellan – volume: 17 start-page: 89 year: 1982 ident: 10.1016/j.proeng.2014.12.240_bib0065 article-title: Pretreatment of Al-Mg Alloys for Electro deposition by Immersion Zinc and Electroless Nickel publication-title: J. Surf. Technol. doi: 10.1016/0376-4583(82)90011-5 contributor: fullname: Armyanov – volume: 190 start-page: 115 year: 2005 ident: 10.1016/j.proeng.2014.12.240_bib0095 article-title: Electroless Ni–B Coatings: Preparation and Evaluation of Hardness and Wear Resistance publication-title: J. Surf. Coat. Technol. doi: 10.1016/j.surfcoat.2004.01.038 contributor: fullname: Krishnaveni – start-page: 133 year: 1985 ident: 10.1016/j.proeng.2014.12.240_bib0100 article-title: Fracture Toughness of Aluminium Alloy 7075 –T6 in the As –cast condition publication-title: Materials Science and Engineering doi: 10.1016/0025-5416(85)90426-4 contributor: fullname: Lai – ident: 10.1016/j.proeng.2014.12.240_bib0025 – start-page: 520 year: 2005 ident: 10.1016/j.proeng.2014.12.240_bib0005 article-title: On the correlation of mechanical and physical properties of 7075-T6 Al alloy publication-title: Engineering Failure Analysis doi: 10.1016/j.engfailanal.2004.09.005 contributor: fullname: Clark – volume: 259 start-page: 828 year: 2005 ident: 10.1016/j.proeng.2014.12.240_bib0080 article-title: Friction and Wear of Electroless NiP and NiP + PTFE Coatings publication-title: J. Wear doi: 10.1016/j.wear.2005.02.052 contributor: fullname: Ramalho |
| SSID | ssj0000070251 |
| Score | 2.239343 |
| Snippet | A study on mechanical and fracture properties, through the experimentation techniques has been carried out on a Al 7075-T6 and it coated with an Electroless... |
| SourceID | crossref elsevier |
| SourceType | Aggregation Database Publisher |
| StartPage | 178 |
| SubjectTerms | 7075-T6 aluminum alloy Electroless Nickel coating Fracture behavior SEM analysis |
| Title | Evaluation of Fracture Toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating |
| URI | https://dx.doi.org/10.1016/j.proeng.2014.12.240 |
| Volume | 97 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LSwMxEA6lJz2IT6wvcvDo0s0m-zrW0lKEimALvYW8VlbrbintwYu_3Zl9FAXx4GXZDQksk-HLZJjvG0JuszgTsXbcU75v4YICbpzYxPc0BKfCpkGQMeQ7Tx-jyVw8LMJFhwxbLgyWVTbYX2N6hdbNSL-xZn-V5_1nhlJ2foiSTRxAFQm_PGQViW9xv8uzoJ5NUHVhxPkeLmgZdFWZF-CUK16wxktgXjDALMhvJ9S3U2d8SA6acJEO6j86Ih1XHJP9byKCJyQf7QS7aZnRMdKetmtHZ9h_B4GMqsLSqUOKL-4IfcL8-xqFVHH-ANApL7bv8LIsP2gMh_sdnUUUE7QU_OTNLemwVFgdfUrm49FsOPGaBgqegbhq44UR3O8MU6FLYpM6p5QNNdywtFZGGG6xrbexnBstUqtCAcGBTbAWhsWKp5rzM9ItysKdE6oZ02nkjO-CTFitlLaZ8xXqgTGnE94jXms0uap1MmRbQPYqayNLNLJkgQQj90jcWlb-2G8JUP7nyot_r7wke_hVJ1CuSHez3rprCCk2-qbyGXhOP0dfTMTLSQ |
| link.rule.ids | 315,783,787,3513,4031,27935,27936,27937,45886 |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LS8NAEF5qPagH8Yn1uQePhibZzetYS0urbRFMobdlX5FoTUppD_57d_IoFcSDt5DsQJgdvnkw8w1C90mQ0EBoYnHbViZBMWYcqtC2hAlOqYpcN3Fg3nk88QdT-jTzZg3UrWdhoK2ywv4S0wu0rt60K222F2nafnWAys72gLKJGFANd9AujF2CmQ9nj5tCCxDauMUaRhCwQKIeoSv6vAxQ6ewNmrwoFAZdKIP85qK23E7_CB1W8SLulL90jBo6O0EHWyyCpyjtbRi7cZ7gPsw9rZcax7CAB5AM80zhsYYZX7gS_AIF-CUwqcL5joGnNFt_mod5_oUD490fcOxjqNBiYygfeo67OYf26DM07ffi7sCqNihY0gRWK8vzTYInHe7pMJCR1pwrT5gUSwguqSQK9npLRYgUNFLcoyY6UCE0wzgBJ5Eg5Bw1szzTFwgLxxGRr6Wt3YQqwblQibY5EII5WoSkhaxaaWxREmWwuoPsnZVKZqBk5rjMKLmFglqz7MeFM4Plf0pe_lvyDu0N4vGIjYaT5yu0D1_Kaso1aq6Wa31j4ouVuC3s5xvmZM1G |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Evaluation+of+Fracture+Toughness+and+Mechanical+Properties+of+Aluminum+Alloy+7075%2C+T6+with+Nickel+Coating&rft.jtitle=Procedia+engineering&rft.au=Kumar%2C+S.+Mohan&rft.au=Pramod%2C+R.&rft.au=Kumar%2C+M.E.+Shashi&rft.au=Govindaraju%2C+H.K.&rft.date=2014&rft.issn=1877-7058&rft.eissn=1877-7058&rft.volume=97&rft.spage=178&rft.epage=185&rft_id=info:doi/10.1016%2Fj.proeng.2014.12.240&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_proeng_2014_12_240 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1877-7058&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1877-7058&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1877-7058&client=summon |