Face milling for hypoid internal bevel gear using new type of tilt milling machine
To improve the machining efficiency, a new model is set up in this paper, which could machine hypoid internal bevel gears by using the tilt cutting method. An algorithm is developed to calculate the processing parameters. Unlike the traditional tilt structure machines, the tilt drum of the new model...
Saved in:
Published in | International journal of advanced manufacturing technology Vol. 90; no. 9-12; pp. 2537 - 2548 |
---|---|
Main Authors | , , , , , |
Format | Journal Article |
Language | English |
Published |
London
Springer London
01.06.2017
Springer Nature B.V |
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | To improve the machining efficiency, a new model is set up in this paper, which could machine hypoid internal bevel gears by using the tilt cutting method. An algorithm is developed to calculate the processing parameters. Unlike the traditional tilt structure machines, the tilt drum of the new model can only be adjusted in a vertical plane. Firstly, according to its special structure, the machine tool mathematical model is built. Then, the tilt angle is calculated and converted into a machine root angle and machine tilt angle equivalently. Based on the principle that the unit normal vector of the internal bevel gear tooth surface should be equal to that of hypoid gear at the reference point, the pressure angle and spiral angle of the internal bevel gear are calculated. Moreover, by adjusting the cutter position and machine root angle, the pressure angle of the shape gear is revised, which greatly extended the universality of the cutter. Finally, the cutter position affected by tilt angle is compensated. To demonstrate the performance of the proposed method, cutting simulation is carried out and the processing experiment is conducted. The results indicate that the simulation model and the actual model are basically in line with the theoretical model, which verifies the feasibility of the proposed processing method. |
---|---|
AbstractList | To improve the machining efficiency, a new model is set up in this paper, which could machine hypoid internal bevel gears by using the tilt cutting method. An algorithm is developed to calculate the processing parameters. Unlike the traditional tilt structure machines, the tilt drum of the new model can only be adjusted in a vertical plane. Firstly, according to its special structure, the machine tool mathematical model is built. Then, the tilt angle is calculated and converted into a machine root angle and machine tilt angle equivalently. Based on the principle that the unit normal vector of the internal bevel gear tooth surface should be equal to that of hypoid gear at the reference point, the pressure angle and spiral angle of the internal bevel gear are calculated. Moreover, by adjusting the cutter position and machine root angle, the pressure angle of the shape gear is revised, which greatly extended the universality of the cutter. Finally, the cutter position affected by tilt angle is compensated. To demonstrate the performance of the proposed method, cutting simulation is carried out and the processing experiment is conducted. The results indicate that the simulation model and the actual model are basically in line with the theoretical model, which verifies the feasibility of the proposed processing method. |
Author | Deng, Xiaozhong Zhang, Hua Jiang, Chuang Dang, Yugong Nie, Shaowu Deng, Jing |
Author_xml | – sequence: 1 givenname: Chuang surname: Jiang fullname: Jiang, Chuang organization: School of Mechatronic Engineering, Northwestern PolytechnicalUniversity – sequence: 2 givenname: Xiaozhong surname: Deng fullname: Deng, Xiaozhong email: dxz01@163.com organization: Collaborative Innovation Center of Machinery Equipment Advanced Manufacturing – sequence: 3 givenname: Jing surname: Deng fullname: Deng, Jing organization: School of Mechatronic Engineering, Northwestern PolytechnicalUniversity – sequence: 4 givenname: Hua surname: Zhang fullname: Zhang, Hua organization: School of Mechatronics Engineering, Henan University of Scienceand Technology – sequence: 5 givenname: Yugong surname: Dang fullname: Dang, Yugong organization: School of Mechatronic Engineering, Northwestern PolytechnicalUniversity – sequence: 6 givenname: Shaowu surname: Nie fullname: Nie, Shaowu organization: School of Mechatronics Engineering, Henan University of Scienceand Technology |
BookMark | eNp9kE1Lw0AQQBdRsK3-AG8LnqM72c8cpVgVCoLoedluJ21Kuom7qdJ_b0JEvOhp5vDeMLwpOQ1NQEKugN0AY_o2MQaaZQxUVsh-MSdkAoLzjDOQp2TCcmUyrpU5J9OUdj2tQJkJeVk4j3Rf1XUVNrRsIt0e26Za0yp0GIOr6Qo_sKYbdJEe0gAF_KTdsUXalLSr6u7H3ju_rQJekLPS1Qkvv-eMvC3uX-eP2fL54Wl-t8w8F6LLvBBGeG_cCgvJ8wI8CIW4lk5DWSqjJMCKafDIuCpkuXbKGVY4p4wrjAM-I9fj3TY27wdMnd01h-HlZPNc5blmWvL_KDCFEZorqXsKRsrHJqWIpW1jtXfxaIHZIbAdA9u-mx0CW9M7-eikng0bjL8u_yl9AV-UfjY |
CitedBy_id | crossref_primary_10_1016_j_mechmachtheory_2022_105001 crossref_primary_10_1177_0954405420978039 crossref_primary_10_1007_s00170_020_06571_5 |
Cites_doi | 10.1115/1.2359475 10.1016/j.jmatprotec.2004.07.103 10.1007/s00170-013-4880-6 10.1007/s00170-013-5499-3 10.1007/s00170-015-7171-6 10.1016/j.jmatprotec.2007.04.081 10.1016/j.mechmachtheory.2015.05.008 10.1243/0954410971532488 10.1007/s00170-012-4678-y 10.1007/s00170-008-1829-2 10.1007/s00170-011-3159-z 10.4028/www.scientific.net/AMR.97-101.3128 10.3901/JME.2002.12.044 10.1007/s00170-015-7823-6 10.1016/j.mechmachtheory.2005.03.001 10.1016/S0924-0136(03)00723-4 10.1115/1.4005232 |
ContentType | Journal Article |
Copyright | Springer-Verlag London 2016 Copyright Springer Science & Business Media 2017 The International Journal of Advanced Manufacturing Technology is a copyright of Springer, (2016). All Rights Reserved. |
Copyright_xml | – notice: Springer-Verlag London 2016 – notice: Copyright Springer Science & Business Media 2017 – notice: The International Journal of Advanced Manufacturing Technology is a copyright of Springer, (2016). All Rights Reserved. |
DBID | AAYXX CITATION 8FE 8FG ABJCF AFKRA BENPR BGLVJ CCPQU DWQXO HCIFZ L6V M7S PQEST PQQKQ PQUKI PRINS PTHSS |
DOI | 10.1007/s00170-016-9570-8 |
DatabaseName | CrossRef ProQuest SciTech Collection ProQuest Technology Collection Materials Science & Engineering Collection ProQuest Central AUTh Library subscriptions: ProQuest Central Technology Collection ProQuest One Community College ProQuest Central SciTech Premium Collection ProQuest Engineering Collection Engineering Database ProQuest One Academic Eastern Edition (DO NOT USE) ProQuest One Academic ProQuest One Academic UKI Edition ProQuest Central China Engineering Collection |
DatabaseTitle | CrossRef Engineering Database Technology Collection ProQuest One Academic Eastern Edition SciTech Premium Collection ProQuest One Community College ProQuest Technology Collection ProQuest SciTech Collection ProQuest Central China ProQuest Central ProQuest Engineering Collection ProQuest One Academic UKI Edition ProQuest Central Korea Materials Science & Engineering Collection ProQuest One Academic Engineering Collection |
DatabaseTitleList | Engineering Database |
Database_xml | – sequence: 1 dbid: 8FG name: ProQuest Technology Collection url: https://search.proquest.com/technologycollection1 sourceTypes: Aggregation Database |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EISSN | 1433-3015 |
EndPage | 2548 |
ExternalDocumentID | 10_1007_s00170_016_9570_8 |
GrantInformation_xml | – fundername: The theory and experimental research of "four cut method" for cutting spiral bevel gear with high effect and low cost grantid: 51475141 |
GroupedDBID | -5B -5G -BR -EM -XW -XX -Y2 -~C .86 .VR 06D 0R~ 0VY 123 1N0 1SB 203 28- 29J 29~ 2J2 2JN 2JY 2KG 2KM 2LR 2P1 2VQ 2~H 30V 4.4 406 408 409 40D 40E 5GY 5QI 5VS 67Z 6NX 8FE 8FG 8TC 8UJ 95- 95. 95~ 96X 9M8 AAAVM AABHQ AABYN AAFGU AAHNG AAIAL AAJKR AANZL AARHV AARTL AATNV AATVU AAUYE AAWCG AAYFA AAYIU AAYQN AAYTO ABBBX ABBXA ABDBF ABDEX ABDZT ABECU ABFGW ABFTD ABFTV ABHQN ABJCF ABJNI ABJOX ABKAG ABKAS ABKCH ABKTR ABMNI ABMQK ABNWP ABPTK ABQBU ABSXP ABTAH ABTEG ABTHY ABTKH ABTMW ABULA ABWNU ABXPI ACBMV ACBRV ACBXY ACBYP ACGFS ACHSB ACHXU ACIGE ACIPQ ACIWK ACKNC ACMDZ ACMLO ACOKC ACOMO ACTTH ACVWB ACWMK ADHHG ADHIR ADINQ ADKNI ADKPE ADMDM ADMVV ADOXG ADQRH ADRFC ADTPH ADURQ ADYFF ADZKW AEBTG AEEQQ AEFIE AEFTE AEGAL AEGNC AEJHL AEJRE AEKMD AEKVL AENEX AEOHA AEPYU AESKC AESTI AETLH AEVLU AEVTX AEXYK AFEXP AFGCZ AFKRA AFLOW AFNRJ AFQWF AFWTZ AFZKB AGAYW AGDGC AGGBP AGGDS AGJBK AGMZJ AGQMX AGWIL AGWZB AGYKE AHAVH AHBYD AHSBF AHYZX AIAKS AIIXL AILAN AIMYW AITGF AJBLW AJDOV AJRNO AJZVZ AKQUC ALMA_UNASSIGNED_HOLDINGS ALWAN AMKLP AMXSW AMYLF AMYQR AOCGG ARCEE ARMRJ ASPBG AVWKF AXYYD AYJHY AZFZN B-. B0M BA0 BBWZM BDATZ BENPR BGLVJ BGNMA CAG CCPQU COF CS3 CSCUP DDRTE DL5 DNIVK DPUIP DU5 EAD EAP EAS EBLON EBS EIOEI EJD EMK EPL ESBYG ESX FEDTE FERAY FFXSO FIGPU FINBP FNLPD FRRFC FSGXE FWDCC GGCAI GGRSB GJIRD GNWQR GQ6 GQ7 GQ8 GXS HCIFZ HF~ HG5 HG6 HMJXF HQYDN HRMNR HVGLF HZ~ I-F I09 IHE IJ- IKXTQ ITM IWAJR IXC IZIGR IZQ I~X I~Z J-C J0Z JBSCW JCJTX JZLTJ KDC KOV KOW L6V LAS LLZTM M4Y M7S MA- ML~ N2Q N9A NB0 NDZJH NPVJJ NQJWS NU0 O9- O93 O9G O9I O9J OAM P19 P9P PF0 PT4 PT5 PTHSS QOK QOS R4E R89 R9I RHV RIG RNI RNS ROL RPX RSV RZK S16 S1Z S26 S27 S28 S3B SAP SCLPG SCV SDH SDM SEG SHX SISQX SJYHP SNE SNPRN SNX SOHCF SOJ SPISZ SRMVM SSLCW STPWE SZN T13 T16 TN5 TSG TSK TSV TUC TUS U2A UG4 UNUBA UOJIU UTJUX UZXMN VC2 VFIZW W23 W48 WK8 YLTOR Z45 Z5O Z7R Z7S Z7V Z7W Z7X Z7Y Z7Z Z81 Z83 Z85 Z86 Z88 Z8M Z8N Z8P Z8Q Z8R Z8S Z8T Z8U Z8V Z8W Z8Z Z92 ZMTXR ZY4 _50 ~8M ~A9 ~EX AACDK AAEOY AAJBT AASML AAYXX ABAKF ACAOD ACDTI ACZOJ AEFQL AEMSY AFBBN AGQEE AGRTI AIGIU CITATION H13 DWQXO PQEST PQQKQ PQUKI PRINS |
ID | FETCH-LOGICAL-c344t-c4484cc8abe953291c146eed5a71ff686511b071ce03695fda6a809aa68a98a13 |
IEDL.DBID | U2A |
ISSN | 0268-3768 |
IngestDate | Thu Oct 10 17:45:26 EDT 2024 Thu Oct 10 16:00:12 EDT 2024 Thu Sep 12 17:12:41 EDT 2024 Sat Dec 16 12:04:40 EST 2023 |
IsPeerReviewed | true |
IsScholarly | true |
Issue | 9-12 |
Keywords | Hypoid internal bevel gear Parameters calculation Machining experiment Cutting simulation Tilt milling machine |
Language | English |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c344t-c4484cc8abe953291c146eed5a71ff686511b071ce03695fda6a809aa68a98a13 |
PQID | 2262270753 |
PQPubID | 2044010 |
PageCount | 12 |
ParticipantIDs | proquest_journals_2262270753 proquest_journals_1898473657 crossref_primary_10_1007_s00170_016_9570_8 springer_journals_10_1007_s00170_016_9570_8 |
PublicationCentury | 2000 |
PublicationDate | 2017-06-01 |
PublicationDateYYYYMMDD | 2017-06-01 |
PublicationDate_xml | – month: 06 year: 2017 text: 2017-06-01 day: 01 |
PublicationDecade | 2010 |
PublicationPlace | London |
PublicationPlace_xml | – name: London – name: Heidelberg |
PublicationTitle | International journal of advanced manufacturing technology |
PublicationTitleAbbrev | Int J Adv Manuf Technol |
PublicationYear | 2017 |
Publisher | Springer London Springer Nature B.V |
Publisher_xml | – name: Springer London – name: Springer Nature B.V |
References | Shan, Xu, Wang, Guo (CR11) 2009; 44 Li, Liang (CR22) 2005; 12 CR2 Kim, Lee, Kim (CR15) 2005; 166 Lee, Jou (CR14) 2003; 140 CR18 Shih, Huang, Lee, Wu (CR8) 2013; 68 Khalilpourazary, Dadvand, Azdast, Sadeghi (CR12) 2011; 56 Molyneux, Hawley, Camberley, Surrey (CR17) 1997; 211 CR20 Litvin, Fuentes, Hayasaka (CR1) 2006; 41 Gao, Deng, Chen (CR10) 2014; 25 Song, Im (CR16) 2007; 192/193 Lin, Yao, Huang (CR19) 2012; 97-101 Xie (CR3) 2013; 67 Fan (CR4) 2007; 129 Wasif, Chen (CR9) 2016; 84 Zhang, Cheng, Guo, Zhang, Xing (CR5) 2015; 92 Li (CR21) 2002; 3 Chen, Wasif (CR7) 2015; 81 Deng, Li, Wei, Deng (CR6) 2014; 71 Wang, Hua, Xia (CR13) 2006; 37 WZ Zhang (9570_CR5) 2015; 92 WG Molyneux (9570_CR17) 1997; 211 9570_CR2 9570_CR20 YP Shih (9570_CR8) 2013; 68 S Khalilpourazary (9570_CR12) 2011; 56 HJ Li (9570_CR22) 2005; 12 DB Shan (9570_CR11) 2009; 44 HJ Wang (9570_CR13) 2006; 37 FL Litvin (9570_CR1) 2006; 41 Q Fan (9570_CR4) 2007; 129 ZC Chen (9570_CR7) 2015; 81 Z Lin (9570_CR19) 2012; 97-101 SX Xie (9570_CR3) 2013; 67 9570_CR18 HJ Li (9570_CR21) 2002; 3 DH Kim (9570_CR15) 2005; 166 M Wasif (9570_CR9) 2016; 84 JH Song (9570_CR16) 2007; 192/193 ZS Gao (9570_CR10) 2014; 25 RS Lee (9570_CR14) 2003; 140 XZ Deng (9570_CR6) 2014; 71 |
References_xml | – volume: 12 start-page: 82 year: 2005 end-page: 84 ident: CR22 article-title: Calculation and experiment of cutting spiral bevel gear mold publication-title: Min Mach contributor: fullname: Liang – volume: 129 start-page: 31 year: 2007 end-page: 37 ident: CR4 article-title: Enhanced algorithms of contact simulation for hypoid gear drives produced by face-milling and face-hobbing process publication-title: J Mech Des doi: 10.1115/1.2359475 contributor: fullname: Fan – ident: CR18 – volume: 37 start-page: 133 year: 2006 end-page: 136 ident: CR13 article-title: Forming analysis of closed die extrusion for spiral bevel driving gear of automotive final drive publication-title: Trans Chin Soc Agric Mach contributor: fullname: Xia – volume: 166 start-page: 372 year: 2005 end-page: 380 ident: CR15 article-title: Estimation of dieservice life against plastic deformation and wear during hot forging processing publication-title: J Mat Proc Tech doi: 10.1016/j.jmatprotec.2004.07.103 contributor: fullname: Kim – volume: 68 start-page: 2499 year: 2013 end-page: 2515 ident: CR8 article-title: Manufacture of face-hobbed straight bevel gears using a six-axis CNC bevel gear cutting machine publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-013-4880-6 contributor: fullname: Wu – ident: CR2 – volume: 71 start-page: 1049 year: 2014 end-page: 1057 ident: CR6 article-title: Face-milling spiral bevel gear tooth surfaces by application of 5-axis CNC machine tool publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-013-5499-3 contributor: fullname: Deng – volume: 81 start-page: 135 year: 2015 end-page: 148 ident: CR7 article-title: A generic and theoretical approach to programming and post-processing for hypoid gear machining on multi-axis CNC face-milling machines publication-title: Int J Adv Manuf Tech006Eol doi: 10.1007/s00170-015-7171-6 contributor: fullname: Wasif – volume: 25 start-page: 944 year: 2014 end-page: 948 ident: CR10 article-title: Process improvement and experiments of spiral bevel gear forgings based on preform design and divided flow cavity technology publication-title: Chin Mech Engrs contributor: fullname: Chen – volume: 192/193 start-page: 1 year: 2007 end-page: 7 ident: CR16 article-title: Process design for closed die forging of bevel gear by finite element analyses publication-title: J Mat Proc Tech doi: 10.1016/j.jmatprotec.2007.04.081 contributor: fullname: Im – volume: 92 start-page: 127 year: 2015 end-page: 143 ident: CR5 article-title: A motion control method for face hobbing on CNC hypoid generator publication-title: Mech Mach Theory doi: 10.1016/j.mechmachtheory.2015.05.008 contributor: fullname: Xing – volume: 211 start-page: 39 year: 1997 end-page: 61 ident: CR17 article-title: The internal bevel gear and its applications publication-title: Proc Instn Mech Engrs doi: 10.1243/0954410971532488 contributor: fullname: Surrey – volume: 67 start-page: 2619 year: 2013 end-page: 2626 ident: CR3 article-title: A genuine face milling cutter geometric model for spiral bevel and hypoid gears publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-012-4678-y contributor: fullname: Xie – volume: 44 start-page: 238 year: 2009 end-page: 243 ident: CR11 article-title: Hybrid forging processes of micro-double gear using micro-forming technology publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-008-1829-2 contributor: fullname: Guo – volume: 56 start-page: 87 year: 2011 end-page: 95 ident: CR12 article-title: Design and manufacture of a straight bevel gear in hot precision forging process using finite volume method and CAD/CAE technology publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-011-3159-z contributor: fullname: Sadeghi – volume: 97-101 start-page: 3128 year: 2012 end-page: 3134 ident: CR19 article-title: Transmission ratio analysis and controllable tooth profile modeling for the nutation drive with double circular-arc external and internal spiral bevel gears publication-title: Adv Mater Res doi: 10.4028/www.scientific.net/AMR.97-101.3128 contributor: fullname: Huang – volume: 3 start-page: 44 issue: 31–32 year: 2002 ident: CR21 article-title: Machining technique of the precise die used for forging of spiral bevel gear publication-title: Mech Des Manuf Engrs doi: 10.3901/JME.2002.12.044 contributor: fullname: Li – volume: 84 start-page: 1873 year: 2016 end-page: 1888 ident: CR9 article-title: An accurate approach to determine the cutting system for the face milling of hypoid gears publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-015-7823-6 contributor: fullname: Chen – volume: 41 start-page: 83 year: 2006 end-page: 118 ident: CR1 article-title: Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears publication-title: Mech Mach Theory doi: 10.1016/j.mechmachtheory.2005.03.001 contributor: fullname: Hayasaka – volume: 140 start-page: 43 year: 2003 end-page: 48 ident: CR14 article-title: Application of numerical simulation for wear analysis of warm forging die publication-title: J Mat Proc Tech doi: 10.1016/S0924-0136(03)00723-4 contributor: fullname: Jou – ident: CR20 – volume: 41 start-page: 83 year: 2006 ident: 9570_CR1 publication-title: Mech Mach Theory doi: 10.1016/j.mechmachtheory.2005.03.001 contributor: fullname: FL Litvin – volume: 97-101 start-page: 3128 year: 2012 ident: 9570_CR19 publication-title: Adv Mater Res doi: 10.4028/www.scientific.net/AMR.97-101.3128 contributor: fullname: Z Lin – ident: 9570_CR20 – volume: 56 start-page: 87 year: 2011 ident: 9570_CR12 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-011-3159-z contributor: fullname: S Khalilpourazary – volume: 67 start-page: 2619 year: 2013 ident: 9570_CR3 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-012-4678-y contributor: fullname: SX Xie – volume: 81 start-page: 135 year: 2015 ident: 9570_CR7 publication-title: Int J Adv Manuf Tech006Eol doi: 10.1007/s00170-015-7171-6 contributor: fullname: ZC Chen – volume: 44 start-page: 238 year: 2009 ident: 9570_CR11 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-008-1829-2 contributor: fullname: DB Shan – ident: 9570_CR18 – volume: 192/193 start-page: 1 year: 2007 ident: 9570_CR16 publication-title: J Mat Proc Tech doi: 10.1016/j.jmatprotec.2007.04.081 contributor: fullname: JH Song – volume: 92 start-page: 127 year: 2015 ident: 9570_CR5 publication-title: Mech Mach Theory doi: 10.1016/j.mechmachtheory.2015.05.008 contributor: fullname: WZ Zhang – volume: 68 start-page: 2499 year: 2013 ident: 9570_CR8 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-013-4880-6 contributor: fullname: YP Shih – volume: 3 start-page: 44 issue: 31–32 year: 2002 ident: 9570_CR21 publication-title: Mech Des Manuf Engrs contributor: fullname: HJ Li – volume: 211 start-page: 39 year: 1997 ident: 9570_CR17 publication-title: Proc Instn Mech Engrs doi: 10.1243/0954410971532488 contributor: fullname: WG Molyneux – volume: 71 start-page: 1049 year: 2014 ident: 9570_CR6 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-013-5499-3 contributor: fullname: XZ Deng – volume: 129 start-page: 31 year: 2007 ident: 9570_CR4 publication-title: J Mech Des doi: 10.1115/1.2359475 contributor: fullname: Q Fan – volume: 12 start-page: 82 year: 2005 ident: 9570_CR22 publication-title: Min Mach contributor: fullname: HJ Li – volume: 84 start-page: 1873 year: 2016 ident: 9570_CR9 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-015-7823-6 contributor: fullname: M Wasif – volume: 166 start-page: 372 year: 2005 ident: 9570_CR15 publication-title: J Mat Proc Tech doi: 10.1016/j.jmatprotec.2004.07.103 contributor: fullname: DH Kim – volume: 140 start-page: 43 year: 2003 ident: 9570_CR14 publication-title: J Mat Proc Tech doi: 10.1016/S0924-0136(03)00723-4 contributor: fullname: RS Lee – ident: 9570_CR2 doi: 10.1115/1.4005232 – volume: 37 start-page: 133 year: 2006 ident: 9570_CR13 publication-title: Trans Chin Soc Agric Mach contributor: fullname: HJ Wang – volume: 25 start-page: 944 year: 2014 ident: 9570_CR10 publication-title: Chin Mech Engrs contributor: fullname: ZS Gao |
SSID | ssj0016168 ssib034539549 ssib019759004 ssib029851711 |
Score | 2.2341273 |
Snippet | To improve the machining efficiency, a new model is set up in this paper, which could machine hypoid internal bevel gears by using the tilt cutting method. An... |
SourceID | proquest crossref springer |
SourceType | Aggregation Database Publisher |
StartPage | 2537 |
SubjectTerms | Algorithms Bevel gears CAE) and Design Computer simulation Computer-Aided Engineering (CAD Cutting parameters Engineering Face milling Gear teeth Gears Hypoid gears Industrial and Production Engineering Machine tools Machining Mathematical models Mechanical Engineering Media Management Milling (machining) Milling machines Original Article Process parameters |
SummonAdditionalLinks | – databaseName: AUTh Library subscriptions: ProQuest Central dbid: BENPR link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwfV1NS8QwEA3qXvQgfuL6RQ6elOAmadPkJCouIriIKHgrSZrogu6ubj34753ptrsq6q2lpIVhMu91ZjKPkIMYohJGZCx0jGCJ9pI5wEEWO2n0gMfSSjw7fN1Tl_fJ1UP6UCfcxnVbZRMTq0BdDD3myI-BJgiRAcDJk9ErQ9UorK7WEhrzpCV4gmXa1tlF7-a28ShuMlTFnHqcMChFP_NomaRyUueq6w6KV4fn4MdE49bTTR20U40drURauGImhQv9Hclm9PRHRbUCqu4KWa4ZJj2duMQqmQuDNbL0Ze7gOrntWh8oCg7BLQXaSp8-RsN-QfuT_OAzddhLRB9hG1DsjH-kwL4ppmvpMNKy_1xOV79U3Zhhg9x3L-7OL1ktrsC8TJKSefgvS7zX1gWTSmG4h5gJgJnajMeotAIm5oB_oJ6YMmksrLK6Y6xV2hptudwkC4PhIGwRGopgXeZQih3riNFlhhcBQCA4CA-Zb5PDxlD5aDJDI59OS66smmOfGVo1122y25gyr7fTOOfaAIpKlWa_Pp75RpscNdb_svqvb23__7IdsigQxKucyy5ZKN_ewx5QkNLt1372CTLA0m0 priority: 102 providerName: ProQuest |
Title | Face milling for hypoid internal bevel gear using new type of tilt milling machine |
URI | https://link.springer.com/article/10.1007/s00170-016-9570-8 https://www.proquest.com/docview/1898473657 https://www.proquest.com/docview/2262270753 |
Volume | 90 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV3dT9swED9ReBkPiMEmOqDyA0-goMZOHPuxRQ3VJiqEqARPke3aXTXWohEe-O-5S5sAU_ewJydKLEvn893vPnwHcBJ8kFzzLPJdzaNEORFZ1INR6KbBoT4WRtDd4auRHI6T73fp3QbwxnUx_3VeRyQrQd3cdasqvaDlKyOd4oNqwRZhBzK4xrxX81CsM-qD2fAY19R8_o2HRZKKZWRrFWmQcXVdDk0RRYdN1ZHPdUt-1F1vgPSvGGqlmvJd2FlhStZbMsFn2PDzPdh-V2lwH25y4zyjFkP4yhCosp8vj4vZhM2WHsEHZil7iE2R8Rnlwk8Z4m1GDlq2CKycPZTN7N9V_qX_AuN8cHsxjFbtFCInkqSMHFpiiXPKWK9TwXXsUEqiikxNFocglUTsZRFxUAcxqdMwMdKorjZGKqOVicVX2Jwv5v4AmJ94YzNLzdcpchhspuOJR7HvLQqEzLXhtCZU8bismlE09ZErqhaUWUZULVQbjmpSFqsD9FTESqPeFDLN1n7Gjec8Q7gj2nBWU__d7H-t9e2__j6ET5y0eOV0OYLN8s-zP0YMUtoOtFR-2YGtXt7vj2i8vP8xwLE_GF3fdCqWfAUGmtLC |
link.rule.ids | 315,786,790,12792,21416,27955,27956,33406,33777,41114,41556,42183,42625,43633,43838,52144,52267 |
linkProvider | Springer Nature |
linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwfV1Lb9swDCa69LDtUKx7YFm7VYedOgiLLVuWTsNaJEgfCYogAXIzJFnqAnRJtnqH_vuSfiTt0O1mw5ANEBS_zyTFD-Bz8EHGOs647-mYJ8oJbhEHeeilwSEeCyPo7PBoLIez5HyezpuE223TVtnGxCpQFytHOfKvSBPiOEOAE9_WvzipRlF1tZHQeAa7NHJTdWD3pD--mrQeFemMVDE3HhdrkqLferRIUlHXuZq6g4yqw3P4Y6Jo66m2Dtqrxo5WIi2R5DrFC_UYybb09K-KagVUg1ew1zBM9r12iX3Y8cvX8PLB3ME3MBkY5xkJDuEtQ9rKftytV4uCLer84A2z1EvErnEbMOqMv2bIvhmla9kqsHJxU25W_6y6Mf1bmA3609Mhb8QVuBNJUnKH_2WJc8pYr1MR68hhzETATE0WhSCVRCZmkX-QnpjUaSiMNKqnjZHKaGUi8Q46y9XSvwfmC29sZkmKneqIwWY6KjyCgLcYHjLXhePWUPm6nqGRb6YlV1bNqc-MrJqrLhy2psyb7XSbR0ojigqZZk8-3vpGF7601n-w-l_f-vD_lx3B8-F0dJlfno0vDuBFTIBe5V8OoVP-_uM_Ih0p7afG5-4BTaTVYw |
linkToPdf | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV3JTsMwEB1BkRAc2BFl9YETKNDEiWMfEVB2hBBIcAq2Y0MFtBVND_D1jLOURXBA3BLFlhV7xvPsWR7AujWWBSKIPdMQgRdyTT2FdtCzjchqtMdUUpc7fHbODq_D45vopuQ57VXR7pVLsshpcFWa2tl2N7Xbg8S3vOwLHoOZJyJ84MMwEqLWhjUY2Tm4PdmvRMoXsaPFHIhcIBwX_YdI0zCihaOrdDwwP8-ew5MJd7rHK0foT4N-NWUf-PSbSzW3VM1JuKv-sQhQedzqZ2pLv30r__iPSZiCiRLFkp1C7KZhyLRnYPxTbcNZuGxKbYgjNcJXgtCYPLx2O62UtIo7yCeiXLwSuUdVIy76_p4gwifuSph0LMlaT9mg93Me8Wnm4Lq5f7V76JUEDp6mYZh5Gs9-odZcKiMiGghf476MRjmSsW8t4wzRnkKM4zjLmIhsKpnkDSEl41Jw6dN5qLU7bbMAxKRGqlg5unfnq7QqFn5q0NAYhVtQrOuwUa1F0i3qdCSDisz5RCUuls1NVMLrsFytVlKqbC_xuUBLTVkU__gZYWoQxAiwaB02q7X51Pu3sRb_1HoNRi_2msnp0fnJEowFDkLkNz7LUMte-mYFAVCmVkshfwdf5_Yr |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Face+milling+for+hypoid+internal+bevel+gear+using+new+type+of+tilt+milling+machine&rft.jtitle=International+journal+of+advanced+manufacturing+technology&rft.au=Jiang%2C+Chuang&rft.au=Deng%2C+Xiaozhong&rft.au=Deng%2C+Jing&rft.au=Zhang%2C+Hua&rft.date=2017-06-01&rft.issn=0268-3768&rft.eissn=1433-3015&rft.volume=90&rft.issue=9-12&rft.spage=2537&rft.epage=2548&rft_id=info:doi/10.1007%2Fs00170-016-9570-8&rft.externalDBID=n%2Fa&rft.externalDocID=10_1007_s00170_016_9570_8 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0268-3768&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0268-3768&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0268-3768&client=summon |