Different Phenomena Encountered during Dilatometry of Low-density Steels

In recent decades, highly alloyed low-density steels are being developed to reduce the weight of different automotive parts. Dilatometry can be a very useful experimental technique to understand phase transformations during heating or cooling of new low-density steel alloys. When performing dilatome...

Full description

Saved in:
Bibliographic Details
Published inJournal of materials engineering and performance Vol. 31; no. 4; pp. 2878 - 2888
Main Authors Jimbert, Pello, Guraya, Teresa, Kaltzakorta, Idurre, Gutiérrez, Teresa, Elvira, Roberto, Tafaghodi Khajavi, Leili
Format Journal Article
LanguageEnglish
Published New York Springer US 01.04.2022
Subjects
Characterization and Evaluation of Materials
Chemistry and Materials Science
Corrosion and Coatings
Engineering Design
Materials Science
Quality Control
Reliability
Safety and Risk
Tribology
vacuum evaporation
Mn migration
dilatometry
low-density steel
Online AccessGet full text

Cover

Abstract In recent decades, highly alloyed low-density steels are being developed to reduce the weight of different automotive parts. Dilatometry can be a very useful experimental technique to understand phase transformations during heating or cooling of new low-density steel alloys. When performing dilatometry measurements some assumptions are made such as the homogeneity of the sample material tested during the experiment. In this study, dilatometry tests were performed for two different low-density steels, and the variations of the composition between the surface and the inner part of the sample were analyzed. The migration of manganese by diffusion from the interior of the samples and finally its evaporation on the surface under vacuum were observed. This compositional gradient generated in the samples may influence the veracity and interpretation of the results obtained in dilatometry when working with high manganese steel alloys. The detachment of surface grains created by this compositional change near the surface of the samples is also investigated.
AbstractList Abstract In recent decades, highly alloyed low-density steels are being developed to reduce the weight of different automotive parts. Dilatometry can be a very useful experimental technique to understand phase transformations during heating or cooling of new low-density steel alloys. When performing dilatometry measurements some assumptions are made such as the homogeneity of the sample material tested during the experiment. In this study, dilatometry tests were performed for two different low-density steels, and the variations of the composition between the surface and the inner part of the sample were analyzed. The migration of manganese by diffusion from the interior of the samples and finally its evaporation on the surface under vacuum were observed. This compositional gradient generated in the samples may influence the veracity and interpretation of the results obtained in dilatometry when working with high manganese steel alloys. The detachment of surface grains created by this compositional change near the surface of the samples is also investigated.
In recent decades, highly alloyed low-density steels are being developed to reduce the weight of different automotive parts. Dilatometry can be a very useful experimental technique to understand phase transformations during heating or cooling of new low-density steel alloys. When performing dilatometry measurements some assumptions are made such as the homogeneity of the sample material tested during the experiment. In this study, dilatometry tests were performed for two different low-density steels, and the variations of the composition between the surface and the inner part of the sample were analyzed. The migration of manganese by diffusion from the interior of the samples and finally its evaporation on the surface under vacuum were observed. This compositional gradient generated in the samples may influence the veracity and interpretation of the results obtained in dilatometry when working with high manganese steel alloys. The detachment of surface grains created by this compositional change near the surface of the samples is also investigated.
Author Guraya, Teresa
Elvira, Roberto
Tafaghodi Khajavi, Leili
Jimbert, Pello
Kaltzakorta, Idurre
Gutiérrez, Teresa
Author_xml – sequence: 1
  givenname: Pello
  orcidid: 0000-0001-8652-0506
  surname: Jimbert
  fullname: Jimbert, Pello
  email: pello.jimbert@ehu.eus
  organization: Faculty of Engineering in Bilbao, University of the Basque Country UPV/EHU
– sequence: 2
  givenname: Teresa
  surname: Guraya
  fullname: Guraya, Teresa
  organization: Faculty of Engineering in Bilbao, University of the Basque Country UPV/EHU
– sequence: 3
  givenname: Idurre
  surname: Kaltzakorta
  fullname: Kaltzakorta, Idurre
  organization: Tecnalia, Basque Research and Technology Alliance (BRTA), Parque Científico y Tecnológico de Bizkaia
– sequence: 4
  givenname: Teresa
  surname: Gutiérrez
  fullname: Gutiérrez, Teresa
  organization: Tecnalia, Basque Research and Technology Alliance (BRTA), Parque Científico y Tecnológico de Bizkaia
– sequence: 5
  givenname: Roberto
  surname: Elvira
  fullname: Elvira, Roberto
  organization: Sidenor I+D
– sequence: 6
  givenname: Leili
  surname: Tafaghodi Khajavi
  fullname: Tafaghodi Khajavi, Leili
  organization: Department of Materials Science and Engineering, McMaster University
BookMark eNp9kM9KAzEQh4NUsK2-gKe8QDSTf90cpa1WKCio55DuJrqlTUqSIvv2ptazpxl-wzfMfBM0CjE4hG6B3gGls_sMoJQklAGhSkBDxAUagxSCAGViVHsqNdFCyys0yXlLK8SYGKPVovfeJRcKfv1yIe5dsHgZ2ngMpcYd7o6pD5940e9sqdOSBhw9Xsdv0rmQ-zLgt-LcLl-jS2932d381Sn6eFy-z1dk_fL0PH9Yk5ZzWYiXkjGquZw1XlracuCdV63WnWgstDXgXijh9AbshmnGlQQBnWq8ppI64FPEznvbFHNOzptD6vc2DQaoObkwZxemujC_LoyoED9D-XD6xiWzjccU6p3_UT9G72NE
CitedBy_id crossref_primary_10_1007_s11663_022_02580_9
crossref_primary_10_1007_s11665_023_07983_6
Cites_doi 10.1016/S1044-5803(02)00259-0
10.1023/A:1004805402404
10.1016/0956-716X(91)90096-J
10.1179/030634575790444432
10.1016/j.tca.2006.11.009
10.2355/isijinternational.ISIJINT-2018-336
10.2355/isijinternational.ISIJINT-2017-272
10.1016/j.matchar.2006.04.027
10.1007/BF01174510
10.1016/j.pmatsci.2017.05.002
10.1002/srin.200606440
10.1007/s11837-014-1126-5
10.1016/j.actamat.2003.11.017
10.1016/S0921-5093(01)01723-3
10.1016/j.actamat.2006.12.007
10.1016/0921-5093(89)90844-7
10.1016/j.scriptamat.2012.11.037
10.1520/MPC20160069
ContentType Journal Article
Copyright The Author(s) 2021
Copyright_xml – notice: The Author(s) 2021
DBID C6C
AAYXX
CITATION
DOI 10.1007/s11665-021-06418-4
DatabaseName SpringerOpen
CrossRef
DatabaseTitle CrossRef
DatabaseTitleList CrossRef
Database_xml – sequence: 1
  dbid: C6C
  name: SpringerOpen
  url: http://www.springeropen.com/
  sourceTypes: Publisher
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 1544-1024
EndPage 2888
ExternalDocumentID 10_1007_s11665_021_06418_4
GrantInformation_xml – fundername: Universidad del País Vasco
GroupedDBID -4Y
-58
-5G
-BR
-EM
-Y2
-~C
.4S
.86
.DC
.VR
06C
06D
0R~
0VY
199
1N0
1SB
2.D
203
28-
29K
2J2
2JN
2JY
2KG
2KM
2LR
2VQ
2~H
30V
3V.
4.4
406
408
40D
40E
5GY
5VS
67Z
6NX
6TJ
78A
88I
8AF
8FE
8FG
8TC
8UJ
8WZ
95-
95.
95~
96X
9M8
A6W
AAAVM
AABHQ
AABYN
AAFGU
AAGCJ
AAHNG
AAIAL
AAIKT
AAJKR
AANZL
AARHV
AARTL
AATNV
AATVU
AAUCO
AAUYE
AAWCG
AAYFA
AAYIU
AAYQN
AAYTO
ABDZT
ABECU
ABFGW
ABFTD
ABFTV
ABHLI
ABHQN
ABJCF
ABJNI
ABJOX
ABKAS
ABKCH
ABMNI
ABMQK
ABNWP
ABQBU
ABSXP
ABTEG
ABTHY
ABTKH
ABTMW
ABULA
ABUWG
ABWNU
ABXPI
ACBMV
ACBRV
ACBXY
ACBYP
ACGFS
ACGOD
ACHSB
ACHXU
ACIGE
ACIPQ
ACIWK
ACKNC
ACMDZ
ACMLO
ACOKC
ACOMO
ACSVP
ACTTH
ACVWB
ACWMK
ADHHG
ADHIR
ADINQ
ADKNI
ADKPE
ADMDM
ADOXG
ADRFC
ADTPH
ADURQ
ADYFF
ADZKW
AEBTG
AEEQQ
AEFTE
AEGAL
AEGNC
AEJHL
AEJRE
AEKMD
AENEX
AEOHA
AEPYU
AESKC
AESTI
AETLH
AEVLU
AEVTX
AEXYK
AFEXP
AFGCZ
AFKRA
AFLOW
AFNRJ
AFQWF
AFWTZ
AFZKB
AGAYW
AGDGC
AGGBP
AGGDS
AGJBK
AGMZJ
AGQMX
AGWIL
AGWZB
AGYKE
AHAVH
AHBYD
AHKAY
AHSBF
AHYZX
AIAKS
AIIXL
AILAN
AIMYW
AITGF
AJBLW
AJDOV
AJGSW
AJRNO
AJZVZ
AKQUC
ALMA_UNASSIGNED_HOLDINGS
ALWAN
AMKLP
AMXSW
AMYLF
AMYQR
AOCGG
ARCSS
ARMRJ
ASPBG
AVWKF
AXYYD
AYJHY
AZFZN
AZQEC
B-.
BA0
BBWZM
BDATZ
BENPR
BGLVJ
BGNMA
BPHCQ
C6C
CAG
CCPQU
COF
CS3
CSCUP
CZ9
D-I
D1I
DDRTE
DNIVK
DPUIP
DU5
DWQXO
EBLON
EBS
EDO
EIOEI
EJD
ESBYG
F5P
FEDTE
FERAY
FFXSO
FIGPU
FINBP
FNLPD
FRRFC
FSGXE
FWDCC
G-Y
G-Z
GGCAI
GGRSB
GJIRD
GNUQQ
GNWQR
GQ6
GQ7
HCIFZ
HF~
HG5
HG6
HMJXF
HRMNR
HVGLF
HZ~
I-F
IJ-
IKXTQ
ITM
IWAJR
IXC
IZQ
I~X
I~Z
J-C
J0Z
JBSCW
JZLTJ
KB.
KC.
KDC
KOV
L6V
LLZTM
M2P
M4Y
M7S
MA-
MK~
N2Q
NB0
NDZJH
NF0
NPVJJ
NQJWS
NU0
O9-
O93
O9G
O9I
O9J
OAM
P19
P2P
P9N
PDBOC
PF0
PQQKQ
PROAC
PT4
PT5
PTHSS
Q2X
QF4
QM1
QN7
QO4
QOK
QOR
QOS
R4E
R89
R9I
RHV
RIG
RNI
RNS
ROL
RPX
RSV
RZK
S16
S1Z
S26
S27
S28
S3B
SAP
SCG
SCLPG
SCM
SDH
SDM
SHX
SISQX
SNE
SNPRN
SNX
SOHCF
SOJ
SPISZ
SQXTU
SRMVM
SSLCW
STPWE
SZN
T13
T16
TSG
TSK
TSV
TUC
TUS
U2A
UG4
ULE
UNUBA
UOJIU
UTJUX
UZXMN
VC2
VFIZW
W48
W4F
WK8
XSW
YLTOR
Z45
Z5O
Z7R
Z7S
Z7U
Z7V
Z7W
Z7X
Z7Y
Z7Z
Z81
Z83
Z85
Z86
Z88
Z8M
Z8N
Z8Q
Z8R
Z8T
Z8W
Z8Z
Z92
ZMTXR
~EX
AACDK
AAEOY
AAJBT
AASML
AAYXX
AAYZH
ABAKF
ACAOD
ACDTI
ACZOJ
AEFQL
AEMSY
AFBBN
AGJZZ
AGQEE
AGRTI
AIGIU
CITATION
H13
SJYHP
ID FETCH-LOGICAL-c335t-f5522093578f5a0c313df6c99d48a1c0c33f464e9b1ab292365141d68f9050e13
IEDL.DBID C6C
ISSN 1059-9495
IngestDate Tue Oct 29 03:32:04 EDT 2024
Sat Dec 16 12:07:54 EST 2023
IsDoiOpenAccess true
IsOpenAccess true
IsPeerReviewed true
IsScholarly true
Issue 4
Keywords vacuum evaporation
Mn migration
dilatometry
low-density steel
Language English
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c335t-f5522093578f5a0c313df6c99d48a1c0c33f464e9b1ab292365141d68f9050e13
ORCID 0000-0001-8652-0506
OpenAccessLink https://doi.org/10.1007/s11665-021-06418-4
PageCount 11
ParticipantIDs crossref_primary_10_1007_s11665_021_06418_4
springer_journals_10_1007_s11665_021_06418_4
PublicationCentury 2000
PublicationDate 2022-04-01
PublicationDateYYYYMMDD 2022-04-01
PublicationDate_xml – month: 04
  year: 2022
  text: 2022-04-01
  day: 01
PublicationDecade 2020
PublicationPlace New York
PublicationPlace_xml – name: New York
PublicationTitle Journal of materials engineering and performance
PublicationTitleAbbrev J. of Materi Eng and Perform
PublicationYear 2022
Publisher Springer US
Publisher_xml – name: Springer US
References Kim, Han, Lee (CR7) 1989; 114
Suh, Oh, Han, Kim (CR23) 2007; 55
Korter, Ton (CR3) 1933; 7
García De Andrés, Caballero, Capdevila, Alvarez (CR18) 2002; 48
Dong-Woo, Kim (CR8) 2013; 68
CR16
CR15
CR14
CR13
Jaramillo, Lusk (CR22) 2004; 52
CR12
CR11
CR10
CR30
Frommeyer, Brüx (CR1) 2006; 77
Tomota, Wang, Ohmura, Sekido, Harjo, Kawasaki, Gong, Taniyama (CR27) 2018; 58
Mohapatra, Sommer, Mittemeijer (CR24) 2007; 453
Chen, Li, Chu, Chou (CR6) 1991; 25
CR4
Jaramillo, Lusk (CR21) 2004; 52
Porter, Easterling (CR31) 2009
CR9
Tomota, Sekido, Harjo, Kawasaki, Gong, Taniyama (CR26) 2017; 57
Lai, Wan (CR5) 1989; 24
Rana, Lahaye, Ray (CR2) 2014; 66
Oliveira, Andrade, Cota (CR20) 2007; 58
Smith, Hales (CR29) 1975; 9
Chen, Rana, Haldar, KumarRay (CR28) 2017; 89
Catteau, Sourmail, Moine (CR25) 2016; 5
Zhao, Mesplont, De Cooman (CR19) 2002; 332
Kop, Sietsma, Van Der Zwaag (CR17) 2001; 36
R Rana (6418_CR2) 2014; 66
6418_CR30
DW Suh (6418_CR23) 2007; 55
RA Jaramillo (6418_CR22) 2004; 52
G Mohapatra (6418_CR24) 2007; 453
6418_CR16
6418_CR15
JZ Zhao (6418_CR19) 2002; 332
SD Catteau (6418_CR25) 2016; 5
S Chen (6418_CR28) 2017; 89
6418_CR14
6418_CR13
FC Chen (6418_CR6) 1991; 25
6418_CR12
6418_CR11
6418_CR10
C García De Andrés (6418_CR18) 2002; 48
DA Porter (6418_CR31) 2009
AF Smith (6418_CR29) 1975; 9
FLG Oliveira (6418_CR20) 2007; 58
RA Jaramillo (6418_CR21) 2004; 52
YG Kim (6418_CR7) 1989; 114
S Dong-Woo (6418_CR8) 2013; 68
W Korter (6418_CR3) 1933; 7
6418_CR4
Y Tomota (6418_CR26) 2017; 57
6418_CR9
Y Tomota (6418_CR27) 2018; 58
HJ Lai (6418_CR5) 1989; 24
TA Kop (6418_CR17) 2001; 36
G Frommeyer (6418_CR1) 2006; 77
References_xml – volume: 48
  start-page: 101
  year: 2002
  end-page: 111
  ident: CR18
  article-title: Application of Dilatometric Analysis to the Study of Solid-Solid Phase Transformations in Steels
  publication-title: Mater. Charact.
  doi: 10.1016/S1044-5803(02)00259-0
  contributor:
    fullname: Alvarez
– volume: 52
  start-page: 859
  year: 2004
  end-page: 867
  ident: CR22
  article-title: Dimensional Anisotropy During Phase Transformations in a Chemically Banded 5140 Steel
  publication-title: Part II: Modeling, Acta Mater.
  contributor:
    fullname: Lusk
– volume: 36
  start-page: 519
  year: 2001
  end-page: 526
  ident: CR17
  article-title: Dilatometric Analysis of Phase Transformations in Hypo-Eutectoid Steels
  publication-title: J. Mater. Sci.
  doi: 10.1023/A:1004805402404
  contributor:
    fullname: Van Der Zwaag
– ident: CR4
– ident: CR14
– volume: 25
  start-page: 585
  year: 1991
  end-page: 590
  ident: CR6
  article-title: Evidence of Strain-induced Martensitic Transformation in Fe-Mn-Al Austenitic Alloy Steels at Room Temperature
  publication-title: Scr. Metall. Mater.
  doi: 10.1016/0956-716X(91)90096-J
  contributor:
    fullname: Chou
– ident: CR16
– volume: 9
  start-page: 181
  issue: 1
  year: 1975
  end-page: 184
  ident: CR29
  article-title: Diffusion of Manganese in Type 316 Austenitic Stainless Steel
  publication-title: Metal Science
  doi: 10.1179/030634575790444432
  contributor:
    fullname: Hales
– ident: CR12
– ident: CR30
– ident: CR10
– volume: 453
  start-page: 57
  year: 2007
  end-page: 66
  ident: CR24
  article-title: A Temperature Correction Procedure for Temperature Inhomogeneity in Dilatometer Specimens
  publication-title: Thermochim. Acta
  doi: 10.1016/j.tca.2006.11.009
  contributor:
    fullname: Mittemeijer
– volume: 58
  start-page: 2125
  year: 2018
  end-page: 2132
  ident: CR27
  article-title: In situ Neutron Diffraction Study on Ferrite and Pearlite Transformations for a 1.5Mn-1.5Si-0.2C Steel
  publication-title: ISIJ Int.
  doi: 10.2355/isijinternational.ISIJINT-2018-336
  contributor:
    fullname: Taniyama
– volume: 57
  start-page: 2237
  year: 2017
  end-page: 2244
  ident: CR26
  article-title: In situ Observations of Transformation Behavior upon Heating for a 1.5Mn-1.5Si-0.2C Steel -Comparison Between Neutron Diffraction XRD EBSD and Dilatometry
  publication-title: ISIJ Int
  doi: 10.2355/isijinternational.ISIJINT-2017-272
  contributor:
    fullname: Taniyama
– volume: 58
  start-page: 256
  year: 2007
  end-page: 261
  ident: CR20
  article-title: Kinetics of Austenite Formation During Continuous Heating in a Low Carbon Steel
  publication-title: Mater. Charact.
  doi: 10.1016/j.matchar.2006.04.027
  contributor:
    fullname: Cota
– volume: 24
  start-page: 2449
  year: 1989
  end-page: 2453
  ident: CR5
  article-title: The Study of Work Hardening in Fe-Mn-Al-C Alloys
  publication-title: J. Mater. Sci.
  doi: 10.1007/BF01174510
  contributor:
    fullname: Wan
– volume: 89
  start-page: 345
  year: 2017
  end-page: 391
  ident: CR28
  article-title: Current State of Fe-Mn-Al-C Low Density Steels
  publication-title: Prog. Mater. Sci.
  doi: 10.1016/j.pmatsci.2017.05.002
  contributor:
    fullname: KumarRay
– volume: 77
  start-page: 627
  year: 2006
  end-page: 633
  ident: CR1
  article-title: Microstructures and Mechanical Properties of High-Strength Fe-Mn-Al-C Light-Weight TRIPLEX Steels
  publication-title: Steel Res. Int.
  doi: 10.1002/srin.200606440
  contributor:
    fullname: Brüx
– year: 2009
  ident: CR31
  publication-title: Phase Transformations in Metals and Alloys
  contributor:
    fullname: Easterling
– ident: CR15
– volume: 66
  start-page: 1734
  year: 2014
  end-page: 1746
  ident: CR2
  article-title: Overview of Lightweight Ferrous Materials-Strategies and Promises
  publication-title: JOM
  doi: 10.1007/s11837-014-1126-5
  contributor:
    fullname: Ray
– volume: 7
  start-page: 365
  year: 1933
  ident: CR3
  publication-title: Arch. Eisenhuettenw
  contributor:
    fullname: Ton
– volume: 52
  start-page: 851
  year: 2004
  end-page: 858
  ident: CR21
  article-title: Dimensional Anisotropy During Phase Transformations in a Chemically Banded 5140 Steel Part I: Experimental Investigation
  publication-title: Acta Mater.
  doi: 10.1016/j.actamat.2003.11.017
  contributor:
    fullname: Lusk
– ident: CR13
– volume: 332
  start-page: 110
  year: 2002
  end-page: 116
  ident: CR19
  article-title: Quantitative Analysis of the Dilatation During an Isothermal Decomposition of Austenites
  publication-title: Mater. Sci. Eng. A
  doi: 10.1016/S0921-5093(01)01723-3
  contributor:
    fullname: De Cooman
– ident: CR11
– ident: CR9
– volume: 55
  start-page: 2659
  year: 2007
  end-page: 2669
  ident: CR23
  article-title: Dilatometric Analysis of Austenite Decomposition Considering the Effect of Non-Isotropic Volume Change
  publication-title: Acta Mater.
  doi: 10.1016/j.actamat.2006.12.007
  contributor:
    fullname: Kim
– volume: 114
  start-page: 51
  year: 1989
  end-page: 59
  ident: CR7
  article-title: Composition and Temperature Dependence of Tensile Properties of Austenitic Fe–Mn–Al–C Alloys
  publication-title: Mater. Sci. Eng. A
  doi: 10.1016/0921-5093(89)90844-7
  contributor:
    fullname: Lee
– volume: 5
  start-page: 564
  year: 2016
  end-page: 584
  ident: CR25
  article-title: Dilatometric Study of Phase Transformations in Steels
  publication-title: Mater. Perform. Charact.
  contributor:
    fullname: Moine
– volume: 68
  start-page: 337
  year: 2013
  end-page: 338
  ident: CR8
  article-title: Viewpoint set 53, Low-Density Steels
  publication-title: Scr. Mater.
  doi: 10.1016/j.scriptamat.2012.11.037
  contributor:
    fullname: Kim
– volume: 24
  start-page: 2449
  year: 1989
  ident: 6418_CR5
  publication-title: J. Mater. Sci.
  doi: 10.1007/BF01174510
  contributor:
    fullname: HJ Lai
– volume: 77
  start-page: 627
  year: 2006
  ident: 6418_CR1
  publication-title: Steel Res. Int.
  doi: 10.1002/srin.200606440
  contributor:
    fullname: G Frommeyer
– ident: 6418_CR16
– volume-title: Phase Transformations in Metals and Alloys
  year: 2009
  ident: 6418_CR31
  contributor:
    fullname: DA Porter
– volume: 89
  start-page: 345
  year: 2017
  ident: 6418_CR28
  publication-title: Prog. Mater. Sci.
  doi: 10.1016/j.pmatsci.2017.05.002
  contributor:
    fullname: S Chen
– ident: 6418_CR12
– ident: 6418_CR14
– ident: 6418_CR10
– ident: 6418_CR30
– volume: 58
  start-page: 2125
  year: 2018
  ident: 6418_CR27
  publication-title: ISIJ Int.
  doi: 10.2355/isijinternational.ISIJINT-2018-336
  contributor:
    fullname: Y Tomota
– volume: 52
  start-page: 851
  year: 2004
  ident: 6418_CR21
  publication-title: Acta Mater.
  doi: 10.1016/j.actamat.2003.11.017
  contributor:
    fullname: RA Jaramillo
– volume: 114
  start-page: 51
  year: 1989
  ident: 6418_CR7
  publication-title: Mater. Sci. Eng. A
  doi: 10.1016/0921-5093(89)90844-7
  contributor:
    fullname: YG Kim
– volume: 52
  start-page: 859
  year: 2004
  ident: 6418_CR22
  publication-title: Part II: Modeling, Acta Mater.
  contributor:
    fullname: RA Jaramillo
– volume: 55
  start-page: 2659
  year: 2007
  ident: 6418_CR23
  publication-title: Acta Mater.
  doi: 10.1016/j.actamat.2006.12.007
  contributor:
    fullname: DW Suh
– volume: 48
  start-page: 101
  year: 2002
  ident: 6418_CR18
  publication-title: Mater. Charact.
  doi: 10.1016/S1044-5803(02)00259-0
  contributor:
    fullname: C García De Andrés
– volume: 68
  start-page: 337
  year: 2013
  ident: 6418_CR8
  publication-title: Scr. Mater.
  doi: 10.1016/j.scriptamat.2012.11.037
  contributor:
    fullname: S Dong-Woo
– volume: 58
  start-page: 256
  year: 2007
  ident: 6418_CR20
  publication-title: Mater. Charact.
  doi: 10.1016/j.matchar.2006.04.027
  contributor:
    fullname: FLG Oliveira
– volume: 9
  start-page: 181
  issue: 1
  year: 1975
  ident: 6418_CR29
  publication-title: Metal Science
  doi: 10.1179/030634575790444432
  contributor:
    fullname: AF Smith
– volume: 7
  start-page: 365
  year: 1933
  ident: 6418_CR3
  publication-title: Arch. Eisenhuettenw
  contributor:
    fullname: W Korter
– ident: 6418_CR15
– ident: 6418_CR13
– ident: 6418_CR4
– volume: 453
  start-page: 57
  year: 2007
  ident: 6418_CR24
  publication-title: Thermochim. Acta
  doi: 10.1016/j.tca.2006.11.009
  contributor:
    fullname: G Mohapatra
– volume: 66
  start-page: 1734
  year: 2014
  ident: 6418_CR2
  publication-title: JOM
  doi: 10.1007/s11837-014-1126-5
  contributor:
    fullname: R Rana
– ident: 6418_CR9
– ident: 6418_CR11
– volume: 36
  start-page: 519
  year: 2001
  ident: 6418_CR17
  publication-title: J. Mater. Sci.
  doi: 10.1023/A:1004805402404
  contributor:
    fullname: TA Kop
– volume: 25
  start-page: 585
  year: 1991
  ident: 6418_CR6
  publication-title: Scr. Metall. Mater.
  doi: 10.1016/0956-716X(91)90096-J
  contributor:
    fullname: FC Chen
– volume: 5
  start-page: 564
  year: 2016
  ident: 6418_CR25
  publication-title: Mater. Perform. Charact.
  doi: 10.1520/MPC20160069
  contributor:
    fullname: SD Catteau
– volume: 332
  start-page: 110
  year: 2002
  ident: 6418_CR19
  publication-title: Mater. Sci. Eng. A
  doi: 10.1016/S0921-5093(01)01723-3
  contributor:
    fullname: JZ Zhao
– volume: 57
  start-page: 2237
  year: 2017
  ident: 6418_CR26
  publication-title: ISIJ Int
  doi: 10.2355/isijinternational.ISIJINT-2017-272
  contributor:
    fullname: Y Tomota
SSID ssj0007224
Score 2.3445272
Snippet In recent decades, highly alloyed low-density steels are being developed to reduce the weight of different automotive parts. Dilatometry can be a very useful...
Abstract In recent decades, highly alloyed low-density steels are being developed to reduce the weight of different automotive parts. Dilatometry can be a very...
SourceID crossref
springer
SourceType Aggregation Database
Publisher
StartPage 2878
SubjectTerms Characterization and Evaluation of Materials
Chemistry and Materials Science
Corrosion and Coatings
Engineering Design
Materials Science
Quality Control
Reliability
Safety and Risk
Tribology
Title Different Phenomena Encountered during Dilatometry of Low-density Steels
URI https://link.springer.com/article/10.1007/s11665-021-06418-4
Volume 31
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1JS8QwFA46c9GDuOI65OBNg02bpOlxVgeXQdCB8VSSNEFBOzJTkfn3vnTqMiKClwbKI4evId_3-jaEjrkNlOPgqTpwHwhjTpPEcUEyrVlgaRJr438NXA9Ef8guRnxUtcnxtTA_4vdnU0qF8DXEPj-HUUnYMqoDB0ufvtUW7c9bNw7nA2xBLpAEVH9VIPP7HosktBgBLYmlt47WKkWIm_NPuIGWbL6JVr_1CdxC_U41xqTANw82900TFO7m5ZwHP2sTz4sNcefxCXzoZ1tMZnjs8NX4jWQ-Qb2Y4dvCAgtuo2Gve9fuk2oEAjFRxAviOOgjH6uMpeMqMBGNMidMkmRMKmrgReSYYDbRVOkQxJoAAUQzIV0ScMA62kG1fJzbXYSpzUKmYhkYSZmNrQT20qCfdGCUVobtoZMPTNKXeaeL9KunsUcwBQTTEsEUrE8_YEurUz_9w3z_f-YHaCX0ZQZlhswhqhWTV3sE5F_oBqo3e63WwK_n95fdRnkK4DkMm-_RB6f7
link.rule.ids 315,783,787,27936,27937,41093,41132,41535,42162,42201,42604,51588,52123,52246
linkProvider Springer Nature
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1bS8MwGA06H9QH8Yp38-CbBps2SdtH2YWq2xDcYG8lSRMUtJOtIvv3fmk7dSKCr-WjD6eh53z5Lgehc248aTlkqhbSB8KYVSS2XJBMKeYZGodKu6uBXl8kQ3Y74qN6TY6bhflRv7-aUiqEmyF2_TmMRoQtoxXmA225wqxofv51Q78ysAW5QGJQ_fWAzO_vWCShxQpoSSydTbRRK0J8XX3CLbRk8m20_m1P4A5KWrWNSYHvH03uliZI3M5LnwfntYmrYUPcenqGHPrFFJMZHlvcHb-TzDWoFzP8UBhgwV007LQHzYTUFghEBwEviOWgj1ytMowsl54OaJBZoeM4Y5GkGh4ElglmYkWl8kGsCRBANBORjT0OWAd7qJGPc7OPMDWZz2QYeTqizIQmAvZSoJ-Up6WSmh2gizkm6Wu16SL92mnsEEwBwbREMIXoyzlsaX3qp3-EH_4v_AytJoNeN-3e9O-O0JrvRg7Kbplj1Cgmb-YEhEChTssT8AE26qba
linkToPdf http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1bS8MwFA66geiDd_FuHnzTzKZNb4_DbU43x0AH86kkaYKidmNmyPz1Jr24TUQQX8uhNKdpznd6zvcdAE5dYVHp6kxV6vQBESIZCqXroZgxYgkc-oybXwO3Ha_ZIzd9tz_D4k-73YuSZMZpMCpNiboYxvJiSnzDnmeYxaZrh-AAkUVQJkYZqQTK1auHVv3rNPbtbLCthhEo1NlATpz5-S7zwWm-MpoGnMYaoMWjZn0mz5WxYhX-8U3F8T9rWQerORqF1Wz7bIAFkWyClRmNwi3QrOUjVBTsPorECDZQWE_SGRNmzifMiI6w9vSi8_dXoUYTOJCwPXhHsWmOVxN4p4SOwNug16jfXzZRPn4BccdxFZKuxmamTuoH0qUWd7ATS4-HYUwCirm-4EjiEREyTJmtgaKnwReOvUCGlqvfs7MDSskgEbsAYhHbhPqBxQNMhC8CHTmZxm7M4pRRTvbAWeH3aJipbERTPWXjn0j7J0r9E2nr88KrUf7Fvf1ivv838xOw1K01ovZ1p3UAlm3DdkgbdQ5BSY3G4khjEMWO8232Cb1e0N0
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Different+Phenomena+Encountered+during+Dilatometry+of+Low-density+Steels&rft.jtitle=Journal+of+materials+engineering+and+performance&rft.au=Jimbert%2C+Pello&rft.au=Guraya%2C+Teresa&rft.au=Kaltzakorta%2C+Idurre&rft.au=Guti%C3%A9rrez%2C+Teresa&rft.date=2022-04-01&rft.issn=1059-9495&rft.eissn=1544-1024&rft.volume=31&rft.issue=4&rft.spage=2878&rft.epage=2888&rft_id=info:doi/10.1007%2Fs11665-021-06418-4&rft.externalDBID=n%2Fa&rft.externalDocID=10_1007_s11665_021_06418_4
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1059-9495&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1059-9495&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1059-9495&client=summon