Investigation to rectangular flat pleated filter for collecting corn straw particles during pulse cleaning

• Published in: Advanced powder technology : the international journal of the Society of Powder Technology, Japan Vol. 29; no. 8; pp. 1787 - 1794
• Main Authors: Zhang, Mingxing, Chen, Haiyan, Yan, Cuiping, Li, Qianqian, Qiu, Jie
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.08.2018
• Subjects: A rectangular flat pleated filter; Corn straw dust; Dust residual; Pulse cleaning; Static peak pressure; Corn straw dust; Dust residual; A rectangular flat pleated filter; Static peak pressure; Pulse cleaning
• DOI: 10.1016/j.apt.2018.04.014
• ISSN: 0921-8831

This work investigated the cleaning performance of a rectangular flat pleated filter for collecting corn straw particles and attempted to reduce the incidence of incomplete cleaning. We examined the dust residuals of a rectangular flat pleated filter during the pulse cleaning. The optimum nozzle type is 7 × Ф7 mm. The dust residual is 310 g. The dust residuals are 198.4 (64%), 52.7 (17%), 58.9 (19%) g at top, middle and bottom areas of the filter cartridge, respectively. The experimental shows that the dust residuals are major on the top area of the filter cartridge, especially on the gap locations between the two-pulse airflows. [Display omitted] •We examine the dust residuals of a rectangular flat pleated filter.•The optimum parameters were obtained.•The dust residuals are major on the top area of the filter cartridge.•The dust residuals are major on the gap locations between the two-pulse airflows. This work investigated the amounts of dust residual of a rectangular flat pleated filter for collecting corn straw particles during pulse cleaning and attempted to explore the causes of incomplete cleaning. In this study, dust residual, filter’s pressure drops and static peak pressures were obtained across flat pleated filter during the pulse cleaning. The optimum parameters were obtained that the pulse electromagnetic valve size was one inch, the pulse pressure was 0.2–0.3 MPa, and the filtration velocity was 0.6 m/min for the nozzle type with 7 holes with a diameter of 7 mm (7 × Ф7 mm). Under this condition, the experimental results show that the dust residuals were 198.4 (64%), 52.7 (17%), 58.9 (19%) g for initial collected dust residual 310 g at top, middle and bottom areas of the filter panel, respectively. The dust residuals were major on the top area of the filter panel, especially on the gap locations between the two-adjacent pulse airflows. Meanwhile, the more pulse interval or dust concentration was increased the dust residuals of the filter panel and the pressure drops of the filter were increased. Moreover, the static peak pressure distribution can give guidance to the dust residual distribution.