Microstructures and tensile properties of Ti2AlNb and Mo-modified Ti2AlNb alloys fabricated by hot isostatic pressing

The Ti2AlNb and Mo-modified Ti2AlNb alloys were fabricated by hot isostatic pressing, and then underwent annealing treatment at 800 °C for 1, 2 and 3 h respectively. To evaluate the tensile properties of the two kinds of alloys, tensile tests were conducted at ambient temperature and 650 °C in this...

Full description

Saved in:
Bibliographic Details
Published inMaterials science & engineering. A, Structural materials : properties, microstructure and processing Vol. 776; p. 139043
Main Authors Zhang, Yaran, Liu, Yongchang, Yu, Liming, Liang, Hongyan, Huang, Yuan, Ma, Zongqing
Format Journal Article
LanguageEnglish
Published Lausanne Elsevier B.V 03.03.2020
Elsevier BV
Subjects
Aging
Aging (metallurgy)
Alloys
Ambient temperature
Elongation
Fracture
Grain boundaries
Grain size
Heat treating
Hot isostatic pressing
Intermetallic compounds
Mechanical properties
Mo addition
Molybdenum
Phase transitions
Precipitates
Room temperature
Tensile properties
Tensile strength
Tensile tests
Thermal stability
Ti2AlNb alloys
Ultimate tensile strength
Mechanical properties
Mo addition
Fracture
Ti2AlNb alloys
Tensile strength
Online AccessGet full text

Cover

Abstract The Ti2AlNb and Mo-modified Ti2AlNb alloys were fabricated by hot isostatic pressing, and then underwent annealing treatment at 800 °C for 1, 2 and 3 h respectively. To evaluate the tensile properties of the two kinds of alloys, tensile tests were conducted at ambient temperature and 650 °C in this study. For the Ti2AlNb alloy, the room-temperature ultimate tensile strength (UTS) was 700–900 MPa, and the highest elongation to failure (εf) reached 6.2% after aging for 2 h at 800 °C. Since the Mo addition promoted the precipitation of the coarse B2+O colony structure near the grain boundary, the Mo-modified Ti2AlNb alloy exhibited decreased UTS and εf at room temperature. As for the high-temperature performance of both the Ti2AlNb and Mo-modified Ti2AlNb alloys, the UTS reached approximately 700 MPa and the εf exceeded 3.0%. Meanwhile, the two kinds of alloys presented the same tendency that both the high-temperature UTS and εf increased firstly and then decreased as the aging time increased. Among them the specimens after aging at 800 °C for 2 h for both alloys acquired the highest UTS and εf. Moreover, the Mo-modified alloy exhibited a better high-temperature ductility than that at room temperature, which is associated with the B2↔O phase transformation during the loading at 650 °C. The Mo addition effectively refined the lath of the precipitates in the grain and the grain size of the matrix, and it induced abundant dislocations. Thus, the Mo-modified Ti2AlNb alloy aged for 1 and 3 h exhibited superior high-temperature mechanical properties than those of the Ti2AlNb alloy.
AbstractList The Ti2AlNb and Mo-modified Ti2AlNb alloys were fabricated by hot isostatic pressing, and then underwent annealing treatment at 800 °C for 1, 2 and 3 h respectively. To evaluate the tensile properties of the two kinds of alloys, tensile tests were conducted at ambient temperature and 650 °C in this study. For the Ti2AlNb alloy, the room-temperature ultimate tensile strength (UTS) was 700–900 MPa, and the highest elongation to failure (εf) reached 6.2% after aging for 2 h at 800 °C. Since the Mo addition promoted the precipitation of the coarse B2+O colony structure near the grain boundary, the Mo-modified Ti2AlNb alloy exhibited decreased UTS and εf at room temperature. As for the high-temperature performance of both the Ti2AlNb and Mo-modified Ti2AlNb alloys, the UTS reached approximately 700 MPa and the εf exceeded 3.0%. Meanwhile, the two kinds of alloys presented the same tendency that both the high-temperature UTS and εf increased firstly and then decreased as the aging time increased. Among them the specimens after aging at 800 °C for 2 h for both alloys acquired the highest UTS and εf. Moreover, the Mo-modified alloy exhibited a better high-temperature ductility than that at room temperature, which is associated with the B2↔O phase transformation during the loading at 650 °C. The Mo addition effectively refined the lath of the precipitates in the grain and the grain size of the matrix, and it induced abundant dislocations. Thus, the Mo-modified Ti2AlNb alloy aged for 1 and 3 h exhibited superior high-temperature mechanical properties than those of the Ti2AlNb alloy.
The Ti2AlNb and Mo-modified Ti2AlNb alloys were fabricated by hot isostatic pressing, and then underwent annealing treatment at 800 °C for 1, 2 and 3 h respectively. To evaluate the tensile properties of the two kinds of alloys, tensile tests were conducted at ambient temperature and 650 °C in this study. For the Ti2AlNb alloy, the room-temperature ultimate tensile strength (UTS) was 700–900 MPa, and the highest elongation to failure (εf) reached 6.2% after aging for 2 h at 800 °C. Since the Mo addition promoted the precipitation of the coarse B2+O colony structure near the grain boundary, the Mo-modified Ti2AlNb alloy exhibited decreased UTS and εf at room temperature. As for the high-temperature performance of both the Ti2AlNb and Mo-modified Ti2AlNb alloys, the UTS reached approximately 700 MPa and the εf exceeded 3.0%. Meanwhile, the two kinds of alloys presented the same tendency that both the high-temperature UTS and εf increased firstly and then decreased as the aging time increased. Among them the specimens after aging at 800 °C for 2 h for both alloys acquired the highest UTS and εf. Moreover, the Mo-modified alloy exhibited a better high-temperature ductility than that at room temperature, which is associated with the B2↔O phase transformation during the loading at 650 °C. The Mo addition effectively refined the lath of the precipitates in the grain and the grain size of the matrix, and it induced abundant dislocations. Thus, the Mo-modified Ti2AlNb alloy aged for 1 and 3 h exhibited superior high-temperature mechanical properties than those of the Ti2AlNb alloy.
ArticleNumber 139043
Author Ma, Zongqing
Huang, Yuan
Zhang, Yaran
Liang, Hongyan
Liu, Yongchang
Yu, Liming
Author_xml – sequence: 1
  givenname: Yaran
  surname: Zhang
  fullname: Zhang, Yaran
– sequence: 2
  givenname: Yongchang
  surname: Liu
  fullname: Liu, Yongchang
  email: licmtju@163.com
– sequence: 3
  givenname: Liming
  surname: Yu
  fullname: Yu, Liming
– sequence: 4
  givenname: Hongyan
  surname: Liang
  fullname: Liang, Hongyan
  email: hong.yan.liang@163.com
– sequence: 5
  givenname: Yuan
  surname: Huang
  fullname: Huang, Yuan
– sequence: 6
  givenname: Zongqing
  surname: Ma
  fullname: Ma, Zongqing
BookMark eNp9kEtLAzEUhYMoWKt_wNWA66lJJjNpwE0RX2B1U9chjxtNmU5qkhH6702t4M7VhXPPuY_vDB0PYQCELgmeEUy66_Vsk0DNKKZFaARmzRGakDlvaiaa7hhNsKCkbrFoTtFZSmuMMWG4naBx6U0MKcfR5DFCqtRgqwxD8j1U2xi2ELMvcnDVytNF_6J_HMtQb4L1zoP90_s-7FLllI7eqFw6eld9hFz5VBao7E0ZCCn54f0cnTjVJ7j4rVP0dn-3un2sn18fnm4Xz7Vp6DzXnFFOuRGm7USHWSeY4i2x2hqitDIC5kZbLZzQGhtnFFfOdcxZxyxhQulmiq4Oc8snnyOkLNdhjENZKSlruOCMtLy46MG1J5EiOLmNfqPiThIs93jlWu7xyj1eecBbQjeHEJT7vzxEmYyHwYD1EUyWNvj_4t-kKYeX
CitedBy_id crossref_primary_10_3390_met10040510
crossref_primary_10_1016_j_msea_2023_144644
crossref_primary_10_1016_j_jpcs_2023_111362
crossref_primary_10_1016_j_jallcom_2022_168307
crossref_primary_10_3390_ma15165560
crossref_primary_10_3390_cryst11070770
crossref_primary_10_1007_s11665_024_09801_z
crossref_primary_10_1007_s11015_023_01518_z
crossref_primary_10_1016_j_jmrt_2023_10_197
crossref_primary_10_3390_cryst11070754
crossref_primary_10_2139_ssrn_4134153
crossref_primary_10_1016_j_jmrt_2023_12_272
crossref_primary_10_3390_ma15249070
crossref_primary_10_1016_j_surfcoat_2022_128787
crossref_primary_10_1016_j_msea_2022_144052
crossref_primary_10_1016_S1003_6326_21_65684_4
crossref_primary_10_1016_j_actamat_2022_118467
crossref_primary_10_1016_j_matchar_2022_112468
crossref_primary_10_1016_j_msea_2021_141345
crossref_primary_10_1016_j_apsusc_2020_148592
crossref_primary_10_1016_j_jallcom_2020_155794
crossref_primary_10_1016_j_jmrt_2022_11_131
crossref_primary_10_1016_j_msea_2023_145761
crossref_primary_10_1016_j_msea_2024_146815
crossref_primary_10_1016_j_jallcom_2022_166715
crossref_primary_10_1016_j_jmrt_2024_03_167
crossref_primary_10_3390_met13050886
crossref_primary_10_1016_j_jmrt_2023_09_129
crossref_primary_10_1016_j_vacuum_2023_112580
crossref_primary_10_1016_j_jallcom_2023_172268
crossref_primary_10_1520_JTE20220555
crossref_primary_10_1002_adem_202100449
crossref_primary_10_1007_s40194_021_01247_4
crossref_primary_10_1016_j_mtcomm_2023_106660
crossref_primary_10_1016_j_addma_2022_103230
crossref_primary_10_1016_j_ijplas_2023_103830
crossref_primary_10_1016_j_intermet_2021_107367
crossref_primary_10_1016_j_intermet_2024_108214
crossref_primary_10_1016_j_msea_2021_141352
crossref_primary_10_3390_met11050802
Cites_doi 10.1016/j.msea.2016.10.052
10.1002/1527-2648(200111)3:11<851::AID-ADEM851>3.0.CO;2-G
10.1016/S0966-9795(98)00044-2
10.1016/j.matdes.2012.10.022
10.1016/j.jmst.2019.08.008
10.1016/j.msea.2016.03.058
10.1016/j.jallcom.2018.11.135
10.1016/j.vacuum.2018.12.044
10.1016/0001-6160(88)90141-1
10.1002/adem.201600621
10.3390/met8060382
10.1007/s11661-999-0240-4
10.1016/S0079-6425(97)00012-1
10.1016/j.msea.2014.04.086
10.1016/j.msea.2014.09.035
10.1016/j.msea.2015.12.037
10.1016/j.scriptamat.2007.03.053
10.1016/j.matchar.2018.09.009
10.1007/BF03027045
10.1016/j.jallcom.2019.07.149
10.1002/adem.201700659
10.1016/j.matchar.2016.11.009
10.1007/s11661-006-9074-5
10.1016/S0966-9795(00)00015-7
10.1007/s11661-017-4193-8
10.1016/j.jmst.2019.04.036
10.1016/j.intermet.2007.07.007
10.1016/j.intermet.2004.12.003
10.1016/j.msea.2010.09.003
10.1016/j.jallcom.2015.05.198
10.1016/j.jmst.2016.10.004
10.1016/j.msea.2014.08.018
10.1016/S1359-6462(02)00462-1
10.1016/j.msea.2013.03.003
10.1016/S0921-5093(01)01626-4
10.1016/j.msea.2019.138660
10.1016/j.msea.2018.12.058
10.1016/j.vacuum.2019.04.034
10.1016/j.jmatprotec.2017.12.044
10.1016/j.msea.2018.12.037
10.1016/j.msea.2016.10.047
10.1016/j.cja.2018.08.009
ContentType Journal Article
Copyright 2020 Elsevier B.V.
Copyright Elsevier BV Mar 3, 2020
Copyright_xml – notice: 2020 Elsevier B.V.
– notice: Copyright Elsevier BV Mar 3, 2020
DBID AAYXX
CITATION
7SR
8BQ
8FD
JG9
DOI 10.1016/j.msea.2020.139043
DatabaseName CrossRef
Engineered Materials Abstracts
METADEX
Technology Research Database
Materials Research Database
DatabaseTitle CrossRef
Materials Research Database
Engineered Materials Abstracts
Technology Research Database
METADEX
DatabaseTitleList Materials Research Database
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 1873-4936
ExternalDocumentID 10_1016_j_msea_2020_139043
S0921509320301313
GroupedDBID --K
--M
-~X
.~1
0R~
1B1
1~.
1~5
4.4
457
4G.
5GY
5VS
7-5
71M
8P~
9JN
AABNK
AABXZ
AACTN
AAEDT
AAEDW
AAEPC
AAIAV
AAIKJ
AAKOC
AALRI
AAOAW
AAQFI
AAXUO
ABFNM
ABMAC
ABXRA
ABYKQ
ACDAQ
ACGFS
ACIWK
ACRLP
ADBBV
ADEZE
AEBSH
AEKER
AEZYN
AFKWA
AFRZQ
AFTJW
AGHFR
AGUBO
AGYEJ
AHHHB
AIEXJ
AIKHN
AITUG
AJOXV
ALMA_UNASSIGNED_HOLDINGS
AMFUW
AMRAJ
AXJTR
BKOJK
BLXMC
CS3
EBS
EFJIC
EFLBG
EO8
EO9
EP2
EP3
F5P
FDB
FIRID
FNPLU
FYGXN
G-Q
GBLVA
IHE
J1W
KOM
M24
M41
MAGPM
MO0
N9A
O-L
O9-
OAUVE
OZT
P-8
P-9
PC.
Q38
RNS
ROL
RPZ
SDF
SDG
SDP
SES
SMS
SPC
SPCBC
SSM
SSZ
T5K
~02
~G-
29M
6TJ
8WZ
A6W
AAQXK
AAXKI
AAYXX
ABXDB
ACNNM
ADMUD
AFJKZ
ASPBG
AVWKF
AZFZN
CITATION
EJD
FEDTE
FGOYB
G-2
G8K
HVGLF
HZ~
R2-
RIG
SEW
WUQ
7SR
8BQ
8FD
JG9
ID FETCH-LOGICAL-c328t-742727c9c569604694a751dbdc1abac9e8cbdb9f9bb0cfca7aff64fdf4d149ab3
IEDL.DBID AIKHN
ISSN 0921-5093
IngestDate Thu Oct 10 19:55:50 EDT 2024
Thu Sep 26 16:24:08 EDT 2024
Fri Feb 23 02:47:52 EST 2024
IsPeerReviewed true
IsScholarly true
Keywords Mechanical properties
Mo addition
Fracture
Ti2AlNb alloys
Tensile strength
Language English
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c328t-742727c9c569604694a751dbdc1abac9e8cbdb9f9bb0cfca7aff64fdf4d149ab3
PQID 2437974157
PQPubID 2045432
ParticipantIDs proquest_journals_2437974157
crossref_primary_10_1016_j_msea_2020_139043
elsevier_sciencedirect_doi_10_1016_j_msea_2020_139043
PublicationCentury 2000
PublicationDate 2020-03-03
PublicationDateYYYYMMDD 2020-03-03
PublicationDate_xml – month: 03
  year: 2020
  text: 2020-03-03
  day: 03
PublicationDecade 2020
PublicationPlace Lausanne
PublicationPlace_xml – name: Lausanne
PublicationTitle Materials science & engineering. A, Structural materials : properties, microstructure and processing
PublicationYear 2020
Publisher Elsevier B.V
Elsevier BV
Publisher_xml – name: Elsevier B.V
– name: Elsevier BV
References Kainuma, Fujita, Mitsui, Ohnuma, Ishida (bib40) 2000; 8
Zhang, Lei, Chen, Yang, Bao (bib1) 2019; 744
Banerjee (bib11) 1997; 42
Wu, Zinkevich, Aldinger, Chu, Shen (bib12) 2008; 16
Wang, Zhang, Li (bib15) 2014; 608
Chen, Xie, Ma, Li, Wu (bib29) 2015; 646
Zhang, Cai, Ma, Li, Yu, Liu (bib30) 2019; 805
Mao, Hagiwara, Emura (bib34) 2007; 57
Zhang, Cai, Liu (bib35) 2019; 165
Wang, Zeng, Li, Zhu, Zheng, Liang (bib39) 2016; 662
Quast, Boehlert (bib27) 2007; 38
Wang, Zeng, Xue, Liao, Zhang (bib20) 2014; 618
Lei, Dong, Chen, Zhang, Zhu (bib45) 2013; 46
Li, Wen, Zhao, Ma, Yu, Li, Liu, Guo, Liu (bib32) 2019; 779
Zhang, Ni, Lei, Chen, Hu (bib37) 2017; 123
Wu, Liu, Li, Wu, Xia, Li (bib3) 2020; 56
Tang, Nakazawa, Hagiwara (bib36) 2002; 329–331
Koch, Liu, Stoloff (bib5) 1985; 39
Li, Cai, Liu, Ma, Wang, Huang, Li (bib33) 2017; 48
Jiao, Liu, Wang, Wu (bib22) 2017; 680
Huang, Liu, Li, Ma, Yu, Li (bib8) 2019; 161
Li, Wang, Gu, Yang (bib4) 2019; 744
Wang, Lü, Cai, Zhai, Wei (bib9) 2020; 772
Wang, Yang, Jiao (bib31) 2016; 654
Shao, Wan, Shan, Guo, Zong (bib16) 2017; 19
Hagiwara, Emura, Araoka, Kong, Tang (bib18) 2003; 9
Emura, Araoka, Hagiwara (bib41) 2003; 48
Zhang, Liu, Xu, Wu, Xu, Yang (bib7) 2019; 35
Xu, Guo, Wu, Lu, Yang (bib21) 2018; 54
Cai, Li, Zhang, Liu, Ma, Li, Li (bib42) 2018; 145
Emura, Tsuzaki, Tsuchiya (bib25) 2010; 528
Wang, Xu, Zong, Zhong, Shan (bib14) 2018; 8
Wu, Guo, Xu, Lu, Cui, Yang (bib28) 2017; 33
Boehlert, Majumdar, Seetharaman, Miracle (bib43) 1999; 30
Germann, Banerjee, Guédou, Strudel (bib24) 2005; 13
Kumpfert (bib38) 2001; 3
Lu, Wu, Xu, Cui, Yang (bib6) 2019; 55
Zhang, Li, Zhan, Zheng, Gao, Shao (bib2) 2020; 36
Li, Cai, Liu, Ma, Wang (bib17) 2018; 20
Yang, Cai, Ma, Huang, Yu, Li, Liu (bib19) 2019; 32
Jia, Zhang, Jiang (bib44) 2014; 616
Xue, Zeng, Wang, Liang, Zhang (bib13) 2013; 573
Banerjee, Gogia, Nandi, Joshi (bib10) 1988; 36
Gogia, Nandy, Banerjee, Carisey, Strudel, Franchet (bib46) 1998; 6
Zhao, Lu, Tong, Yang (bib23) 2017; 679
Lei, Zhang, Zhou, Ni, Chen (bib26) 2018; 255
Li (10.1016/j.msea.2020.139043_bib4) 2019; 744
Jiao (10.1016/j.msea.2020.139043_bib22) 2017; 680
Wu (10.1016/j.msea.2020.139043_bib12) 2008; 16
Zhao (10.1016/j.msea.2020.139043_bib23) 2017; 679
Hagiwara (10.1016/j.msea.2020.139043_bib18) 2003; 9
Zhang (10.1016/j.msea.2020.139043_bib2) 2020; 36
Wu (10.1016/j.msea.2020.139043_bib28) 2017; 33
Kainuma (10.1016/j.msea.2020.139043_bib40) 2000; 8
Wang (10.1016/j.msea.2020.139043_bib14) 2018; 8
Cai (10.1016/j.msea.2020.139043_bib42) 2018; 145
Mao (10.1016/j.msea.2020.139043_bib34) 2007; 57
Lei (10.1016/j.msea.2020.139043_bib45) 2013; 46
Zhang (10.1016/j.msea.2020.139043_bib7) 2019; 35
Tang (10.1016/j.msea.2020.139043_bib36) 2002; 329–331
Xu (10.1016/j.msea.2020.139043_bib21) 2018; 54
Zhang (10.1016/j.msea.2020.139043_bib1) 2019; 744
Emura (10.1016/j.msea.2020.139043_bib25) 2010; 528
Zhang (10.1016/j.msea.2020.139043_bib35) 2019; 165
Zhang (10.1016/j.msea.2020.139043_bib30) 2019; 805
Zhang (10.1016/j.msea.2020.139043_bib37) 2017; 123
Huang (10.1016/j.msea.2020.139043_bib8) 2019; 161
Germann (10.1016/j.msea.2020.139043_bib24) 2005; 13
Lei (10.1016/j.msea.2020.139043_bib26) 2018; 255
Quast (10.1016/j.msea.2020.139043_bib27) 2007; 38
Boehlert (10.1016/j.msea.2020.139043_bib43) 1999; 30
Jia (10.1016/j.msea.2020.139043_bib44) 2014; 616
Banerjee (10.1016/j.msea.2020.139043_bib11) 1997; 42
Wang (10.1016/j.msea.2020.139043_bib20) 2014; 618
Li (10.1016/j.msea.2020.139043_bib17) 2018; 20
Emura (10.1016/j.msea.2020.139043_bib41) 2003; 48
Gogia (10.1016/j.msea.2020.139043_bib46) 1998; 6
Wang (10.1016/j.msea.2020.139043_bib31) 2016; 654
Koch (10.1016/j.msea.2020.139043_bib5) 1985; 39
Lu (10.1016/j.msea.2020.139043_bib6) 2019; 55
Li (10.1016/j.msea.2020.139043_bib33) 2017; 48
Wang (10.1016/j.msea.2020.139043_bib9) 2020; 772
Shao (10.1016/j.msea.2020.139043_bib16) 2017; 19
Li (10.1016/j.msea.2020.139043_bib32) 2019; 779
Wang (10.1016/j.msea.2020.139043_bib39) 2016; 662
Yang (10.1016/j.msea.2020.139043_bib19) 2019; 32
Chen (10.1016/j.msea.2020.139043_bib29) 2015; 646
Kumpfert (10.1016/j.msea.2020.139043_bib38) 2001; 3
Xue (10.1016/j.msea.2020.139043_bib13) 2013; 573
Wang (10.1016/j.msea.2020.139043_bib15) 2014; 608
Wu (10.1016/j.msea.2020.139043_bib3) 2020; 56
Banerjee (10.1016/j.msea.2020.139043_bib10) 1988; 36
References_xml – volume: 779
  start-page: 175
  year: 2019
  end-page: 182
  ident: bib32
  article-title: The formation and evolution mechanism of amorphous layer surrounding Nb nano-grains in Nb-Al system during mechanical alloying process
  publication-title: J. Alloys Compd.
  contributor:
    fullname: Liu
– volume: 772
  year: 2020
  ident: bib9
  article-title: Rapid solidification kinetics and mechanical property characteristics of Ni–Zr eutectic alloys processed under electromagnetic levitation state
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Wei
– volume: 618
  start-page: 288
  year: 2014
  end-page: 294
  ident: bib20
  article-title: Designed bimodal size lamellar O microstructures in Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Zhang
– volume: 33
  start-page: 172
  year: 2017
  end-page: 178
  ident: bib28
  article-title: Effect of hot isostatic pressing loading route on microstructure and mechanical properties of powder metallurgy Ti
  publication-title: J. Mater. Sci. Technol.
  contributor:
    fullname: Yang
– volume: 680
  start-page: 182
  year: 2017
  end-page: 189
  ident: bib22
  article-title: Creep behavior and effects of heat treatment on creep resistance of Ti-22Al-24Nb-0.5 Mo alloy
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Wu
– volume: 13
  start-page: 920
  year: 2005
  end-page: 924
  ident: bib24
  article-title: Effect of composition on the mechanical properties of newly developed Ti
  publication-title: Intermetallics
  contributor:
    fullname: Strudel
– volume: 48
  start-page: 629
  year: 2003
  end-page: 634
  ident: bib41
  article-title: B2 grain size refinement and its effect on room temperature tensile properties of a Ti-22Al-27Nb orthorhombic intermetallic alloy
  publication-title: Scripta Mater.
  contributor:
    fullname: Hagiwara
– volume: 9
  start-page: 265
  year: 2003
  end-page: 272
  ident: bib18
  article-title: Enhanced mechanical properties of orthorhombic Ti
  publication-title: Met. Mater. Int.
  contributor:
    fullname: Tang
– volume: 30
  start-page: 2305
  year: 1999
  end-page: 2323
  ident: bib43
  article-title: Part I. The microstructural evolution in Ti
  publication-title: Metall. Mater. Trans.
  contributor:
    fullname: Miracle
– volume: 8
  start-page: 382
  year: 2018
  ident: bib14
  article-title: Effect of initial microstructures on hot deformation behavior and workability of Ti
  publication-title: Metals
  contributor:
    fullname: Shan
– volume: 145
  start-page: 413
  year: 2018
  end-page: 422
  ident: bib42
  article-title: Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti
  publication-title: Mater. Char.
  contributor:
    fullname: Li
– volume: 616
  start-page: 93
  year: 2014
  end-page: 98
  ident: bib44
  article-title: Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by vacuum hot pressing sintering
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Jiang
– volume: 528
  start-page: 355
  year: 2010
  end-page: 362
  ident: bib25
  article-title: Improvement of room temperature ductility for Mo and Fe modified Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Tsuchiya
– volume: 805
  start-page: 1184
  year: 2019
  end-page: 1190
  ident: bib30
  article-title: Solution treatment for enhanced hardness in Mo-modified Ti
  publication-title: J. Alloys Compd.
  contributor:
    fullname: Liu
– volume: 35
  start-page: 2513
  year: 2019
  end-page: 2525
  ident: bib7
  article-title: Characterization of the prior particle boundaries in a powder metallurgy Ti
  publication-title: J. Mater. Sci. Technol.
  contributor:
    fullname: Yang
– volume: 46
  start-page: 151
  year: 2013
  end-page: 156
  ident: bib45
  article-title: Microstructure and tensile properties of laser beam welded Ti-22Al-27Nb alloy
  publication-title: Mater. Des.
  contributor:
    fullname: Zhu
– volume: 654
  start-page: 69
  year: 2016
  end-page: 76
  ident: bib31
  article-title: Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by elemental powder metallurgy
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Jiao
– volume: 55
  start-page: 729
  year: 2019
  end-page: 740
  ident: bib6
  article-title: Ring rolling forming and properties of Ti
  publication-title: Acta Metall. Sin.
  contributor:
    fullname: Yang
– volume: 38
  start-page: 529
  year: 2007
  end-page: 536
  ident: bib27
  article-title: Comparison of the microstructure, tensile, and creep behavior for Ti-24Al-17Nb-0.66 Mo (atomic percent) and Ti-24Al-17Nb-2.3Mo (atomic percent) alloy
  publication-title: Metall. Mater. Trans.
  contributor:
    fullname: Boehlert
– volume: 329–331
  start-page: 492
  year: 2002
  end-page: 498
  ident: bib36
  article-title: The effect of quaternary additions on the microstructures and mechanical properties of orthorhombic Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Hagiwara
– volume: 48
  start-page: 4365
  year: 2017
  end-page: 4371
  ident: bib33
  article-title: Formation of fine B2/β+O structure and enhancement of hardness in the aged Ti
  publication-title: Metall. Mater. Trans.
  contributor:
    fullname: Li
– volume: 3
  start-page: 851
  year: 2001
  end-page: 864
  ident: bib38
  article-title: Intermetallic alloy based on orthorhombic titanium aluminide
  publication-title: Adv. Eng. Mater.
  contributor:
    fullname: Kumpfert
– volume: 161
  start-page: 209
  year: 2019
  end-page: 219
  ident: bib8
  article-title: Microstructure evolution and phase transformations in Ti-22Al-25Nb alloy tailored by super-transus solution treatment
  publication-title: Vacuum
  contributor:
    fullname: Li
– volume: 16
  start-page: 42
  year: 2008
  end-page: 51
  ident: bib12
  article-title: Prediction of the ordering behaviours of the orthorhombic phase based on Ti
  publication-title: Intermetallics
  contributor:
    fullname: Shen
– volume: 20
  year: 2018
  ident: bib17
  article-title: Microstructure and mechanical properties of Ti
  publication-title: Adv. Eng. Mater.
  contributor:
    fullname: Wang
– volume: 744
  start-page: 436
  year: 2019
  end-page: 444
  ident: bib1
  article-title: Heat treatment of laser-additive welded Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Bao
– volume: 8
  start-page: 855
  year: 2000
  end-page: 867
  ident: bib40
  article-title: Phase equilibria among α (hcp), β (bcc) and γ (L10) phases in Ti-Al base ternary alloy
  publication-title: Intermetallics
  contributor:
    fullname: Ishida
– volume: 165
  start-page: 199
  year: 2019
  end-page: 206
  ident: bib35
  article-title: Formation of diverse O+B2 structure and hardness of Mo-modified Ti-22Al-25Nb alloy upon cooling
  publication-title: Vacuum
  contributor:
    fullname: Liu
– volume: 123
  start-page: 51
  year: 2017
  end-page: 57
  ident: bib37
  article-title: In situ investigation of the tensile deformation of laser welded Ti
  publication-title: Mater. Char.
  contributor:
    fullname: Hu
– volume: 255
  start-page: 477
  year: 2018
  end-page: 487
  ident: bib26
  article-title: A comparative study of microstructure and tensile properties of Ti
  publication-title: J. Mater. Process. Technol.
  contributor:
    fullname: Chen
– volume: 679
  start-page: 455
  year: 2017
  end-page: 464
  ident: bib23
  article-title: Tensile behavior of Ti-22Al-24Nb-0.5 Mo in the range 25-650° C
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Yang
– volume: 646
  start-page: 490
  year: 2015
  end-page: 496
  ident: bib29
  article-title: Microstructure evolution and mechanical properties of linear friction welded Ti
  publication-title: J. Alloys Compd.
  contributor:
    fullname: Wu
– volume: 36
  start-page: 871
  year: 1988
  end-page: 882
  ident: bib10
  article-title: A new ordered orthorhombic phase in a Ti
  publication-title: Acta Metall.
  contributor:
    fullname: Joshi
– volume: 744
  start-page: 733
  year: 2019
  end-page: 745
  ident: bib4
  article-title: Electrically assisted diffusion bonding of Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Yang
– volume: 662
  start-page: 120
  year: 2016
  end-page: 128
  ident: bib39
  article-title: Microstructural evolution and tensile behavior of Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Liang
– volume: 39
  start-page: 351
  year: 1985
  ident: bib5
  article-title: High-temperature ordered imermetallic alloy
  publication-title: MRS Syrup, Proc.
  contributor:
    fullname: Stoloff
– volume: 42
  start-page: 135
  year: 1997
  end-page: 158
  ident: bib11
  article-title: The intermetallic Ti
  publication-title: Prog. Mater. Sci.
  contributor:
    fullname: Banerjee
– volume: 32
  start-page: 1343
  year: 2019
  end-page: 1351
  ident: bib19
  article-title: Effect of W addition on phase transformation and microstructure of powder metallurgic Ti-22Al-25Nb alloy during quenching and furnace cooling
  publication-title: Chin. J. Aeronaut.
  contributor:
    fullname: Liu
– volume: 19
  year: 2017
  ident: bib16
  article-title: Hydrogen-induced improvement of the cylindrical drawing properties of a Ti-22Al-25Nb alloy
  publication-title: Adv. Eng. Mater.
  contributor:
    fullname: Zong
– volume: 36
  start-page: 79
  year: 2020
  end-page: 83
  ident: bib2
  article-title: Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in-situ transmission electron microscopy observations
  publication-title: J. Mater. Sci. Technol.
  contributor:
    fullname: Shao
– volume: 608
  start-page: 229
  year: 2014
  end-page: 233
  ident: bib15
  article-title: Microstructure and high temperature tensile properties of Ti-22Al-25Nb alloy prepared by reactive sintering with element powders
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Li
– volume: 54
  start-page: 1537
  year: 2018
  end-page: 1552
  ident: bib21
  article-title: Progress in hot isostatic pressing technology of titanium alloy powder
  publication-title: Acta Metall. Sin.
  contributor:
    fullname: Yang
– volume: 6
  start-page: 741
  year: 1998
  end-page: 748
  ident: bib46
  article-title: Microstructure and mechanical properties of orthorhombic alloy in the Ti
  publication-title: Intermetallics
  contributor:
    fullname: Franchet
– volume: 56
  start-page: 21
  year: 2020
  end-page: 35
  ident: bib3
  article-title: Recent progress of microstructure evolution and performance of multiphase Ni
  publication-title: Acta Metall. Sin.
  contributor:
    fullname: Li
– volume: 57
  start-page: 261
  year: 2007
  end-page: 264
  ident: bib34
  article-title: Creep behavior and tensile properties of Mo and Fe added orthorhombic Ti-22Al-11Nb-2Mo-1Fe alloy
  publication-title: Scripta Mater.
  contributor:
    fullname: Emura
– volume: 573
  start-page: 183
  year: 2013
  end-page: 189
  ident: bib13
  article-title: Quantitative analysis on microstructure evolution and tensile property for the isothermally forged Ti
  publication-title: Mater. Sci. Eng., A
  contributor:
    fullname: Zhang
– volume: 54
  start-page: 1537
  year: 2018
  ident: 10.1016/j.msea.2020.139043_bib21
  article-title: Progress in hot isostatic pressing technology of titanium alloy powder
  publication-title: Acta Metall. Sin.
  contributor:
    fullname: Xu
– volume: 680
  start-page: 182
  year: 2017
  ident: 10.1016/j.msea.2020.139043_bib22
  article-title: Creep behavior and effects of heat treatment on creep resistance of Ti-22Al-24Nb-0.5 Mo alloy
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2016.10.052
  contributor:
    fullname: Jiao
– volume: 3
  start-page: 851
  year: 2001
  ident: 10.1016/j.msea.2020.139043_bib38
  article-title: Intermetallic alloy based on orthorhombic titanium aluminide
  publication-title: Adv. Eng. Mater.
  doi: 10.1002/1527-2648(200111)3:11<851::AID-ADEM851>3.0.CO;2-G
  contributor:
    fullname: Kumpfert
– volume: 6
  start-page: 741
  year: 1998
  ident: 10.1016/j.msea.2020.139043_bib46
  article-title: Microstructure and mechanical properties of orthorhombic alloy in the Ti2AlNb system
  publication-title: Intermetallics
  doi: 10.1016/S0966-9795(98)00044-2
  contributor:
    fullname: Gogia
– volume: 46
  start-page: 151
  year: 2013
  ident: 10.1016/j.msea.2020.139043_bib45
  article-title: Microstructure and tensile properties of laser beam welded Ti-22Al-27Nb alloy
  publication-title: Mater. Des.
  doi: 10.1016/j.matdes.2012.10.022
  contributor:
    fullname: Lei
– volume: 36
  start-page: 79
  year: 2020
  ident: 10.1016/j.msea.2020.139043_bib2
  article-title: Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in-situ transmission electron microscopy observations
  publication-title: J. Mater. Sci. Technol.
  doi: 10.1016/j.jmst.2019.08.008
  contributor:
    fullname: Zhang
– volume: 662
  start-page: 120
  year: 2016
  ident: 10.1016/j.msea.2020.139043_bib39
  article-title: Microstructural evolution and tensile behavior of Ti2AlNb alloy based α2-phase decomposition
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2016.03.058
  contributor:
    fullname: Wang
– volume: 779
  start-page: 175
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib32
  article-title: The formation and evolution mechanism of amorphous layer surrounding Nb nano-grains in Nb-Al system during mechanical alloying process
  publication-title: J. Alloys Compd.
  doi: 10.1016/j.jallcom.2018.11.135
  contributor:
    fullname: Li
– volume: 161
  start-page: 209
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib8
  article-title: Microstructure evolution and phase transformations in Ti-22Al-25Nb alloy tailored by super-transus solution treatment
  publication-title: Vacuum
  doi: 10.1016/j.vacuum.2018.12.044
  contributor:
    fullname: Huang
– volume: 36
  start-page: 871
  year: 1988
  ident: 10.1016/j.msea.2020.139043_bib10
  article-title: A new ordered orthorhombic phase in a Ti2AlNb alloy
  publication-title: Acta Metall.
  doi: 10.1016/0001-6160(88)90141-1
  contributor:
    fullname: Banerjee
– volume: 19
  year: 2017
  ident: 10.1016/j.msea.2020.139043_bib16
  article-title: Hydrogen-induced improvement of the cylindrical drawing properties of a Ti-22Al-25Nb alloy
  publication-title: Adv. Eng. Mater.
  doi: 10.1002/adem.201600621
  contributor:
    fullname: Shao
– volume: 8
  start-page: 382
  year: 2018
  ident: 10.1016/j.msea.2020.139043_bib14
  article-title: Effect of initial microstructures on hot deformation behavior and workability of Ti2AlNb-based alloy
  publication-title: Metals
  doi: 10.3390/met8060382
  contributor:
    fullname: Wang
– volume: 30
  start-page: 2305
  year: 1999
  ident: 10.1016/j.msea.2020.139043_bib43
  article-title: Part I. The microstructural evolution in Ti2AlNb O+BCC orthorhombic alloy
  publication-title: Metall. Mater. Trans.
  doi: 10.1007/s11661-999-0240-4
  contributor:
    fullname: Boehlert
– volume: 42
  start-page: 135
  year: 1997
  ident: 10.1016/j.msea.2020.139043_bib11
  article-title: The intermetallic Ti2AlNb
  publication-title: Prog. Mater. Sci.
  doi: 10.1016/S0079-6425(97)00012-1
  contributor:
    fullname: Banerjee
– volume: 608
  start-page: 229
  year: 2014
  ident: 10.1016/j.msea.2020.139043_bib15
  article-title: Microstructure and high temperature tensile properties of Ti-22Al-25Nb alloy prepared by reactive sintering with element powders
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2014.04.086
  contributor:
    fullname: Wang
– volume: 618
  start-page: 288
  year: 2014
  ident: 10.1016/j.msea.2020.139043_bib20
  article-title: Designed bimodal size lamellar O microstructures in Ti2AlNb based alloy: microstructural evolution, tensile and creep properties
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2014.09.035
  contributor:
    fullname: Wang
– volume: 654
  start-page: 69
  year: 2016
  ident: 10.1016/j.msea.2020.139043_bib31
  article-title: Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by elemental powder metallurgy
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2015.12.037
  contributor:
    fullname: Wang
– volume: 57
  start-page: 261
  year: 2007
  ident: 10.1016/j.msea.2020.139043_bib34
  article-title: Creep behavior and tensile properties of Mo and Fe added orthorhombic Ti-22Al-11Nb-2Mo-1Fe alloy
  publication-title: Scripta Mater.
  doi: 10.1016/j.scriptamat.2007.03.053
  contributor:
    fullname: Mao
– volume: 145
  start-page: 413
  year: 2018
  ident: 10.1016/j.msea.2020.139043_bib42
  article-title: Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti2AlNb-based alloy
  publication-title: Mater. Char.
  doi: 10.1016/j.matchar.2018.09.009
  contributor:
    fullname: Cai
– volume: 9
  start-page: 265
  year: 2003
  ident: 10.1016/j.msea.2020.139043_bib18
  article-title: Enhanced mechanical properties of orthorhombic Ti2AlNb-based intermetallic alloy
  publication-title: Met. Mater. Int.
  doi: 10.1007/BF03027045
  contributor:
    fullname: Hagiwara
– volume: 805
  start-page: 1184
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib30
  article-title: Solution treatment for enhanced hardness in Mo-modified Ti2AlNb-based alloy
  publication-title: J. Alloys Compd.
  doi: 10.1016/j.jallcom.2019.07.149
  contributor:
    fullname: Zhang
– volume: 39
  start-page: 351
  year: 1985
  ident: 10.1016/j.msea.2020.139043_bib5
  article-title: High-temperature ordered imermetallic alloy
  publication-title: MRS Syrup, Proc.
  contributor:
    fullname: Koch
– volume: 20
  year: 2018
  ident: 10.1016/j.msea.2020.139043_bib17
  article-title: Microstructure and mechanical properties of Ti2AlNb-based Alloy synthesized by spark plasma sintering from pre-alloyed and ball-milled powder
  publication-title: Adv. Eng. Mater.
  doi: 10.1002/adem.201700659
  contributor:
    fullname: Li
– volume: 123
  start-page: 51
  year: 2017
  ident: 10.1016/j.msea.2020.139043_bib37
  article-title: In situ investigation of the tensile deformation of laser welded Ti2AlNb joints
  publication-title: Mater. Char.
  doi: 10.1016/j.matchar.2016.11.009
  contributor:
    fullname: Zhang
– volume: 38
  start-page: 529
  year: 2007
  ident: 10.1016/j.msea.2020.139043_bib27
  article-title: Comparison of the microstructure, tensile, and creep behavior for Ti-24Al-17Nb-0.66 Mo (atomic percent) and Ti-24Al-17Nb-2.3Mo (atomic percent) alloy
  publication-title: Metall. Mater. Trans.
  doi: 10.1007/s11661-006-9074-5
  contributor:
    fullname: Quast
– volume: 56
  start-page: 21
  year: 2020
  ident: 10.1016/j.msea.2020.139043_bib3
  article-title: Recent progress of microstructure evolution and performance of multiphase Ni3Al-based intermetallic alloy with high Fe and Cr contents
  publication-title: Acta Metall. Sin.
  contributor:
    fullname: Wu
– volume: 8
  start-page: 855
  year: 2000
  ident: 10.1016/j.msea.2020.139043_bib40
  article-title: Phase equilibria among α (hcp), β (bcc) and γ (L10) phases in Ti-Al base ternary alloy
  publication-title: Intermetallics
  doi: 10.1016/S0966-9795(00)00015-7
  contributor:
    fullname: Kainuma
– volume: 48
  start-page: 4365
  year: 2017
  ident: 10.1016/j.msea.2020.139043_bib33
  article-title: Formation of fine B2/β+O structure and enhancement of hardness in the aged Ti2AlNb-Based alloy prepared by spark plasma sintering
  publication-title: Metall. Mater. Trans.
  doi: 10.1007/s11661-017-4193-8
  contributor:
    fullname: Li
– volume: 35
  start-page: 2513
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib7
  article-title: Characterization of the prior particle boundaries in a powder metallurgy Ti2AlNb alloy
  publication-title: J. Mater. Sci. Technol.
  doi: 10.1016/j.jmst.2019.04.036
  contributor:
    fullname: Zhang
– volume: 16
  start-page: 42
  year: 2008
  ident: 10.1016/j.msea.2020.139043_bib12
  article-title: Prediction of the ordering behaviours of the orthorhombic phase based on Ti2AlNb alloy by combining thermodynamic model with ab initio calculation
  publication-title: Intermetallics
  doi: 10.1016/j.intermet.2007.07.007
  contributor:
    fullname: Wu
– volume: 13
  start-page: 920
  year: 2005
  ident: 10.1016/j.msea.2020.139043_bib24
  article-title: Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide
  publication-title: Intermetallics
  doi: 10.1016/j.intermet.2004.12.003
  contributor:
    fullname: Germann
– volume: 528
  start-page: 355
  year: 2010
  ident: 10.1016/j.msea.2020.139043_bib25
  article-title: Improvement of room temperature ductility for Mo and Fe modified Ti2AlNb alloy
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2010.09.003
  contributor:
    fullname: Emura
– volume: 646
  start-page: 490
  year: 2015
  ident: 10.1016/j.msea.2020.139043_bib29
  article-title: Microstructure evolution and mechanical properties of linear friction welded Ti2AlNb alloy
  publication-title: J. Alloys Compd.
  doi: 10.1016/j.jallcom.2015.05.198
  contributor:
    fullname: Chen
– volume: 33
  start-page: 172
  year: 2017
  ident: 10.1016/j.msea.2020.139043_bib28
  article-title: Effect of hot isostatic pressing loading route on microstructure and mechanical properties of powder metallurgy Ti2AlNb alloy
  publication-title: J. Mater. Sci. Technol.
  doi: 10.1016/j.jmst.2016.10.004
  contributor:
    fullname: Wu
– volume: 616
  start-page: 93
  year: 2014
  ident: 10.1016/j.msea.2020.139043_bib44
  article-title: Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by vacuum hot pressing sintering
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2014.08.018
  contributor:
    fullname: Jia
– volume: 48
  start-page: 629
  year: 2003
  ident: 10.1016/j.msea.2020.139043_bib41
  article-title: B2 grain size refinement and its effect on room temperature tensile properties of a Ti-22Al-27Nb orthorhombic intermetallic alloy
  publication-title: Scripta Mater.
  doi: 10.1016/S1359-6462(02)00462-1
  contributor:
    fullname: Emura
– volume: 573
  start-page: 183
  year: 2013
  ident: 10.1016/j.msea.2020.139043_bib13
  article-title: Quantitative analysis on microstructure evolution and tensile property for the isothermally forged Ti2AlNb based alloy during heat treatment
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2013.03.003
  contributor:
    fullname: Xue
– volume: 329–331
  start-page: 492
  year: 2002
  ident: 10.1016/j.msea.2020.139043_bib36
  article-title: The effect of quaternary additions on the microstructures and mechanical properties of orthorhombic Ti2AlNb-based alloy
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/S0921-5093(01)01626-4
  contributor:
    fullname: Tang
– volume: 772
  year: 2020
  ident: 10.1016/j.msea.2020.139043_bib9
  article-title: Rapid solidification kinetics and mechanical property characteristics of Ni–Zr eutectic alloys processed under electromagnetic levitation state
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2019.138660
  contributor:
    fullname: Wang
– volume: 744
  start-page: 436
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib1
  article-title: Heat treatment of laser-additive welded Ti2AlNb joints: microstructure and tensile properties
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2018.12.058
  contributor:
    fullname: Zhang
– volume: 165
  start-page: 199
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib35
  article-title: Formation of diverse O+B2 structure and hardness of Mo-modified Ti-22Al-25Nb alloy upon cooling
  publication-title: Vacuum
  doi: 10.1016/j.vacuum.2019.04.034
  contributor:
    fullname: Zhang
– volume: 255
  start-page: 477
  year: 2018
  ident: 10.1016/j.msea.2020.139043_bib26
  article-title: A comparative study of microstructure and tensile properties of Ti2AlNb joints prepared by laser welding and laser-additive welding with the addition of filler powder
  publication-title: J. Mater. Process. Technol.
  doi: 10.1016/j.jmatprotec.2017.12.044
  contributor:
    fullname: Lei
– volume: 55
  start-page: 729
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib6
  article-title: Ring rolling forming and properties of Ti2AlNb special shaped ring prepared by powder metallurgy
  publication-title: Acta Metall. Sin.
  contributor:
    fullname: Lu
– volume: 744
  start-page: 733
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib4
  article-title: Electrically assisted diffusion bonding of Ti2AlNb alloy sheet using CP-Ti foil interlayer: microstructural characterization and mechanical tests
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2018.12.037
  contributor:
    fullname: Li
– volume: 679
  start-page: 455
  year: 2017
  ident: 10.1016/j.msea.2020.139043_bib23
  article-title: Tensile behavior of Ti-22Al-24Nb-0.5 Mo in the range 25-650° C
  publication-title: Mater. Sci. Eng., A
  doi: 10.1016/j.msea.2016.10.047
  contributor:
    fullname: Zhao
– volume: 32
  start-page: 1343
  year: 2019
  ident: 10.1016/j.msea.2020.139043_bib19
  article-title: Effect of W addition on phase transformation and microstructure of powder metallurgic Ti-22Al-25Nb alloy during quenching and furnace cooling
  publication-title: Chin. J. Aeronaut.
  doi: 10.1016/j.cja.2018.08.009
  contributor:
    fullname: Yang
SSID ssj0001405
Score 2.5618343
Snippet The Ti2AlNb and Mo-modified Ti2AlNb alloys were fabricated by hot isostatic pressing, and then underwent annealing treatment at 800 °C for 1, 2 and 3 h...
The Ti2AlNb and Mo-modified Ti2AlNb alloys were fabricated by hot isostatic pressing, and then underwent annealing treatment at 800 °C for 1, 2 and 3 h...
SourceID proquest
crossref
elsevier
SourceType Aggregation Database
Publisher
StartPage 139043
SubjectTerms Aging
Aging (metallurgy)
Alloys
Ambient temperature
Elongation
Fracture
Grain boundaries
Grain size
Heat treating
Hot isostatic pressing
Intermetallic compounds
Mechanical properties
Mo addition
Molybdenum
Phase transitions
Precipitates
Room temperature
Tensile properties
Tensile strength
Tensile tests
Thermal stability
Ti2AlNb alloys
Ultimate tensile strength
Title Microstructures and tensile properties of Ti2AlNb and Mo-modified Ti2AlNb alloys fabricated by hot isostatic pressing
URI https://dx.doi.org/10.1016/j.msea.2020.139043
https://www.proquest.com/docview/2437974157
Volume 776
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV07T8MwELZKu8CAeIryqDywIdO8U48VoiqgdqGVull-QlCbVLQMLPx2zk7CS4KBMY4dRWfn7vui7-4QOk91LLWXcOKbKCBRLAMitE-JzcHkseCRlk4gO06G0-h2Fs8a6KrOhbGyysr3lz7deetqpFtZs7vMsu69RyFcASEPLKoPbefaFoSjoNdErf7N3XD84ZCBQzglI8wndkGVO1PKvBZwooAmBrYDBPWi8Lf49MNTu_Az2EHbFW7E_fLVdlFD53to60s1wX30MrLiurIg7AuwaMxzhZ1Afa7x0v50f7bVU3Fh8CQL-vOxcDNGBVkUKjOART_H5_PidYUNF66LENwRr_ixWONsVdgUpEziUkCbPxyg6eB6cjUkVVcFIsOgtybAhQGzSCrjxBZmSWjE09hXQkmfCy6p7kmhBDVUCE8ayVNuTBIZZSIFbIqL8BA18yLXRwjrmAfcSKMUsLhEUMEBzdh26qnPgWbJNrqobcmWZfEMVqvKnpi1PLOWZ6Xl2yiuzc2-HQEG3v3Pdaf13rDqA1wxV2fRoqX0-J-PPUGb9srpzcJT1ITd02cAQNaigzYu3_xOdczeAQNQ3Dg
link.rule.ids 315,783,787,4509,24128,27936,27937,45597,45691
linkProvider Elsevier
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV07T8MwELYQDMCAeIpCAQ9syGrzrscKgVpKs1CkbpafEJQmFS1D_z1nJ-ElwcDql6Kzff6-6Ls7hC4THUndjTnxTOiTMJI-EdqjxMZg8kjwUEsnkE3jwWN4N42ma-i6iYWxssra91c-3XnruqVTW7Mzz7LOQ5fCcwWE3LeoPrCVazcADVC4nRv94WiQfjhk4BBOyQjjiZ1Qx85UMq8ZnCigib6tAEG7YfDb-_TDU7vn53YX7dS4EferT9tDa7rYR9tfsgkeoLexFddVCWHfgEVjXijsBOq5xnP70_3VZk_FpcGTzO_nqXAjxiWZlSozgEU_2_O8XC2w4cJVEYIescLP5RJni9KGIGUSVwLa4ukQPd7eTK4HpK6qQGTg95YEuDBgFkkl2Cq27DjkSeQpoaTHBZdU96RQghoqRFcayRNuTBwaZUIFbIqL4AitF2WhjxHWEfe5kUYpYHGxoIIDmrHl1BOPA82SLXTV2JLNq-QZrFGVvTBreWYtzyrLt1DUmJt9OwIMvPuf89rN3rD6Ai6Yy7No0VJy8s9lL9DmYDK-Z_fDdHSKtmyP054FbbQOO6nPAIwsxXl92N4BWdLeLA
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Microstructures+and+tensile+properties+of+Ti2AlNb+and+Mo-modified+Ti2AlNb+alloys+fabricated+by+hot+isostatic+pressing&rft.jtitle=Materials+science+%26+engineering.+A%2C+Structural+materials+%3A+properties%2C+microstructure+and+processing&rft.au=Zhang%2C+Yaran&rft.au=Liu%2C+Yongchang&rft.au=Yu%2C+Liming&rft.au=Liang%2C+Hongyan&rft.date=2020-03-03&rft.issn=0921-5093&rft.volume=776&rft.spage=139043&rft_id=info:doi/10.1016%2Fj.msea.2020.139043&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_msea_2020_139043
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0921-5093&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0921-5093&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0921-5093&client=summon