Effect of coiling conditions on the strengthening mechanisms of Nb microalloyed steels with high Ti addition levels
Steels alloyed with high Ti addition levels present an interesting combination of high strength and formability, principally due to the high levels of precipitation hardening that can be attained. However, their mechanical properties can be highly sensitive to variations in the processing route. In...
Saved in:
| Published in | Materials science & engineering. A, Structural materials : properties, microstructure and processing Vol. 748; pp. 386 - 395 |
|---|---|
| Main Authors | , , |
| Format | Journal Article |
| Language | English |
| Published |
Lausanne
Elsevier B.V
04.03.2019
Elsevier BV |
| Subjects | |
| Online Access | Get full text |
Cover
Loading…
| Abstract | Steels alloyed with high Ti addition levels present an interesting combination of high strength and formability, principally due to the high levels of precipitation hardening that can be attained. However, their mechanical properties can be highly sensitive to variations in the processing route. In this work, dilatometry tests were performed to study the effect of coiling conditions on the microstructures and hardening mechanisms of a reference Nb microalloyed steel (0.03%Nb) and two high Ti-Nb steels (0.05%Ti-0.03%Nb, 0.1%Ti-0.03%Nb). Coiling temperatures from 550 °C to 675 °C and cooling rates of 0.01 °C/s and 0.03 °C/s were considered. A significant increase in hardness was observed for the high Ti-Nb steel samples. While the grain size and dislocation hardening were similar for all steels, much higher precipitation strengthening values in the range of 69–163 MPa and 100–307 MPa were calculated for the 0.05%Ti and 0.1%Ti steels, respectively. As a consequence, high yield strength values (over 700 MPa) were estimated for coiling temperatures greater than 625 °C for the Ti10Nb3 steel. However, it was also observed that the mechanical behavior of this steel greatly depended on coiling conditions: maximum mechanical strength was achieved at 625–650 °C, while it decreased significantly for temperatures between 550 °C and 600 °C and at 675 °C. The small size and density of the precipitates detected with TEM support the large precipitation hardening effect calculated in these conditions. |
|---|---|
| AbstractList | Steels alloyed with high Ti addition levels present an interesting combination of high strength and formability, principally due to the high levels of precipitation hardening that can be attained. However, their mechanical properties can be highly sensitive to variations in the processing route. In this work, dilatometry tests were performed to study the effect of coiling conditions on the microstructures and hardening mechanisms of a reference Nb microalloyed steel (0.03%Nb) and two high Ti-Nb steels (0.05%Ti-0.03%Nb, 0.1%Ti-0.03%Nb). Coiling temperatures from 550 °C to 675 °C and cooling rates of 0.01 °C/s and 0.03 °C/s were considered. A significant increase in hardness was observed for the high Ti-Nb steel samples. While the grain size and dislocation hardening were similar for all steels, much higher precipitation strengthening values in the range of 69–163 MPa and 100–307 MPa were calculated for the 0.05%Ti and 0.1%Ti steels, respectively. As a consequence, high yield strength values (over 700 MPa) were estimated for coiling temperatures greater than 625 °C for the Ti10Nb3 steel. However, it was also observed that the mechanical behavior of this steel greatly depended on coiling conditions: maximum mechanical strength was achieved at 625–650 °C, while it decreased significantly for temperatures between 550 °C and 600 °C and at 675 °C. The small size and density of the precipitates detected with TEM support the large precipitation hardening effect calculated in these conditions. |
| Author | Pereda, Beatriz García-Sesma, Leire López, Beatriz |
| Author_xml | – sequence: 1 givenname: Leire surname: García-Sesma fullname: García-Sesma, Leire email: lgsesma@ceit.es organization: Ceit, Manuel Lardizabal 15, 20018 Donostia/San Sebastián, Spain – sequence: 2 givenname: Beatriz surname: López fullname: López, Beatriz email: blopez@ceit.es organization: Ceit, Manuel Lardizabal 15, 20018 Donostia/San Sebastián, Spain – sequence: 3 givenname: Beatriz surname: Pereda fullname: Pereda, Beatriz email: bpereda@ceit.es organization: Ceit, Manuel Lardizabal 15, 20018 Donostia/San Sebastián, Spain |
| BookMark | eNp9UEtLAzEQDlLBtvoHPAU875rHvgJepNQHiF70HHaTSTdlN9FkrfTfm6WePc3wvYb5VmjhvAOErinJKaHV7T4fI7Q5I1TkhCasPENL2tQ8KwSvFmhJBKNZSQS_QKsY94QQWpByieLWGFAT9gYrbwfrdmk6bSfrXcTe4akHHKcAbpc2N_MjqL51No5xdr12eLQq-HYY_BF00gIMEf_Yqce93fX43eJWnwLxAIdEXqJz0w4Rrv7mGn08bN83T9nL2-Pz5v4lU5w1U8ZrY2pGdQWdampiulZ0uhZdw2lV6UaLDhhTIERZCGVIW4LpBCShEVxXBedrdHPK_Qz-6xviJPf-O7h0UjJGRNkQSoukYidVeiLGAEZ-Bju24SgpkXO5ci_ncuVcriQ0YWUy3Z1M6R04WAgyKgtOgbYh1Sm1t__ZfwGcHobm |
| CitedBy_id | crossref_primary_10_1016_j_optlastec_2024_110802 crossref_primary_10_1007_s12540_022_01170_3 crossref_primary_10_3390_met12010048 crossref_primary_10_1016_j_jmrt_2022_03_150 crossref_primary_10_1080_02670836_2022_2076424 crossref_primary_10_1007_s11665_020_04608_0 crossref_primary_10_1016_j_msea_2019_138808 crossref_primary_10_1515_htmp_2022_0266 crossref_primary_10_1007_s11665_023_08112_z crossref_primary_10_1016_j_mtcomm_2022_103625 crossref_primary_10_1007_s42243_021_00659_2 crossref_primary_10_1016_j_matdes_2020_108720 crossref_primary_10_1007_s12666_020_02066_9 crossref_primary_10_1016_j_mtla_2022_101667 crossref_primary_10_1016_j_matchar_2023_112849 crossref_primary_10_1016_j_matchar_2020_110201 crossref_primary_10_3390_met14010042 crossref_primary_10_1016_j_jmrt_2024_04_003 crossref_primary_10_1016_j_msea_2020_139800 crossref_primary_10_1016_j_msea_2020_140518 crossref_primary_10_3390_met10020165 crossref_primary_10_1007_s11661_020_05807_z crossref_primary_10_1016_j_msea_2022_144210 crossref_primary_10_3390_met13020405 crossref_primary_10_1016_j_jmapro_2020_06_036 crossref_primary_10_1007_s11837_023_06230_6 crossref_primary_10_1088_2053_1591_ac2529 crossref_primary_10_1016_j_jmrt_2021_08_148 crossref_primary_10_1016_j_jmrt_2023_11_081 crossref_primary_10_3390_met10030382 crossref_primary_10_1016_j_msea_2019_138653 crossref_primary_10_1002_srin_202100428 crossref_primary_10_1007_s11661_020_05700_9 crossref_primary_10_1016_j_jmrt_2024_06_080 crossref_primary_10_1007_s11661_022_06670_w crossref_primary_10_1002_srin_202200840 crossref_primary_10_1016_j_jmrt_2023_11_209 crossref_primary_10_3390_met14020249 crossref_primary_10_1016_j_matchar_2023_112930 crossref_primary_10_1016_j_msea_2023_145674 crossref_primary_10_1016_j_matchar_2022_111966 crossref_primary_10_1016_j_msea_2023_145332 |
| Cites_doi | 10.1179/026708399773002782 10.1016/0169-4332(94)90351-4 10.1016/j.msea.2017.01.014 10.1007/s11665-015-1387-3 10.1016/j.actamat.2011.06.037 10.1007/s11661-014-2450-7 10.3390/met7020065 10.1007/s11661-001-0133-7 10.1179/095066003225008833 10.1179/msc.1977.11.2.59 10.1016/j.actamat.2011.09.051 10.1016/j.msea.2016.09.070 10.1016/j.micron.2005.10.009 10.1016/j.msea.2011.08.061 10.1007/s11661-014-2226-0 10.2355/isijinternational.39.930 10.2355/isijinternational.40.893 10.1016/j.msea.2012.10.012 10.1023/A:1021377125838 10.1007/s11661-012-1270-x 10.1007/s12540-014-5002-1 10.1016/j.msea.2012.12.055 10.2355/isijinternational.44.1945 10.1002/srin.201400275 10.1007/s11661-012-1395-y 10.1007/s11661-011-0624-0 10.1016/j.actamat.2008.05.023 10.1016/j.matchar.2016.01.023 10.1016/j.actamat.2007.03.021 10.2355/isijinternational.47.860 10.1016/j.matdes.2016.08.086 10.1007/s11661-015-3066-2 10.1016/j.msea.2007.11.110 10.1007/s12666-016-0975-8 10.1016/j.jmatprotec.2010.05.018 10.1016/j.msea.2010.01.004 |
| ContentType | Journal Article |
| Copyright | 2019 Elsevier B.V. Copyright Elsevier BV Mar 4, 2019 |
| Copyright_xml | – notice: 2019 Elsevier B.V. – notice: Copyright Elsevier BV Mar 4, 2019 |
| DBID | AAYXX CITATION 7SR 8BQ 8FD JG9 |
| DOI | 10.1016/j.msea.2019.01.105 |
| DatabaseName | CrossRef Engineered Materials Abstracts METADEX Technology Research Database Materials Research Database |
| DatabaseTitle | CrossRef Materials Research Database Engineered Materials Abstracts Technology Research Database METADEX |
| DatabaseTitleList | Materials Research Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1873-4936 |
| EndPage | 395 |
| ExternalDocumentID | 10_1016_j_msea_2019_01_105 S0921509319301388 |
| GroupedDBID | --K --M -~X .~1 0R~ 1B1 1~. 1~5 4.4 457 4G. 5GY 5VS 7-5 71M 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAXUO ABFNM ABMAC ABXRA ABYKQ ACDAQ ACGFS ACIWK ACRLP ADBBV ADEZE AEBSH AEKER AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AGYEJ AHHHB AIEXJ AIKHN AITUG AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BKOJK BLXMC CS3 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 F5P FDB FIRID FNPLU FYGXN G-Q GBLVA IHE J1W KOM M24 M41 MAGPM MO0 N9A O-L O9- OAUVE OZT P-8 P-9 PC. Q38 RIG RNS ROL RPZ SDF SDG SDP SES SMS SPC SPCBC SSM SSZ T5K ~02 ~G- 29M 6TJ 8WZ A6W AAQXK AAXKI AAYXX ABXDB ACNNM ADMUD AFJKZ ASPBG AVWKF AZFZN CITATION FEDTE FGOYB G-2 G8K HVGLF HZ~ R2- SEW WUQ 7SR 8BQ 8FD JG9 |
| ID | FETCH-LOGICAL-c328t-37ff721d6ebc870fba9bd79b83166d8d9be22ce99549cf0a5efb9e70ff93d6433 |
| IEDL.DBID | AIKHN |
| ISSN | 0921-5093 |
| IngestDate | Thu Oct 10 20:01:08 EDT 2024 Thu Sep 26 16:24:00 EDT 2024 Fri Feb 23 02:28:52 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | High Ti steels Mechanical properties Microstructural characterization Precipitation hardening |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c328t-37ff721d6ebc870fba9bd79b83166d8d9be22ce99549cf0a5efb9e70ff93d6433 |
| PQID | 2209580114 |
| PQPubID | 2045432 |
| PageCount | 10 |
| ParticipantIDs | proquest_journals_2209580114 crossref_primary_10_1016_j_msea_2019_01_105 elsevier_sciencedirect_doi_10_1016_j_msea_2019_01_105 |
| PublicationCentury | 2000 |
| PublicationDate | 2019-03-04 |
| PublicationDateYYYYMMDD | 2019-03-04 |
| PublicationDate_xml | – month: 03 year: 2019 text: 2019-03-04 day: 04 |
| PublicationDecade | 2010 |
| PublicationPlace | Lausanne |
| PublicationPlace_xml | – name: Lausanne |
| PublicationTitle | Materials science & engineering. A, Structural materials : properties, microstructure and processing |
| PublicationYear | 2019 |
| Publisher | Elsevier B.V Elsevier BV |
| Publisher_xml | – name: Elsevier B.V – name: Elsevier BV |
| References | Chen, Yen, Kao, Li, Huang, Yang, Wang (bib13) 2009; 499 Campos, Morales, Kestenback (bib31) 2001; 32A Mao, Huo, Sun, Chai (bib17) 2010; 210 Kim, Song, Seo, Hong, Lee (bib16) 2013; 565 Isasti, Jorge-Badiola, Taheri, Lopez, Uranga (bib23) 2011; 42 Pereda, Fernandez, Lopez, Rodriguez-Ibabe (bib3) 2007; 47 Sanz, Pereda, Lopez (bib6) 2017; 686 Funakawa, Shiozaki, Tomita, Yamamoto, Maeda (bib9) 2004; 44 Llanos, Pereda, López (bib36) 2015; 46 Timokhina, Miller, Wang, Beladi, Cizek, Hodgson (bib12) 2016; 111 Gutierrez, Altuna (bib28) 2008; 56 Iza-Mendia, Altuna, Pereda, Gutierrez (bib1) 2012; 43 Yen, Chen, Huang, Yang (bib18) 2011; 16 Li, Li, Cui, Xiao, Wang (bib35) 2016; 677 Isasti, Jorge-Badiola, Taheri, Uranga (bib4) 2014; 20 Field, Bradford, Nowell, Lillo (bib32) 2007; 55 Uemori, Chijiwa, Tamehiro, Morikawa (bib10) 1994; 76–77 Medina, Chapa, Valles, Quispe, Vega (bib5) 1999; 39 Lagneborg, Siwecki, Zajac, Hutchinson (bib7) 1999; 28 Chen, Yang, Chen, Chen (bib39) 2016; 114 Freeman, Honeycombe (bib8) 1977; 11 Thomas, Midgley (bib40) 2002; 21 bib22 Altuna, Iza-Mendia, Gutierrez (bib2) 2012; 43 Gladman (bib26) 1997 Zhang, Li, Zhang (bib33) 2011; 529 Jang, Lee, Heo, Suh (bib11) 2012; 60 Gladman (bib34) 1999; 15 Isasti, Jorge-Badiola, Taheri, Uranga (bib30) 2014; 45A Iza-Mendia, Gutierrez (bib25) 2013; 561 DeArdo (bib27) 2003; 6 Courtois, Epicier, Scott (bib41) 2006; 37 Baker, Nutting (bib37) 1959 Chen, Wang (bib38) 2015; 86 Patra, Sam, Singhai, Hazra, Ram, Bakshi (bib14) 2017; 70 Fernandez, Uranga, López, Rodriguez-Ibabe (bib20) 2000; 40 Pereda, Aretxabaleta, Lopez (bib21) 2015; 24 Ghosh, Bart, Das, Ravi Kumar, Pramanick, Chakraborty, Das, Hadas, Bharathy, Ray (bib15) 2014; 45 Bechet, Beaujard (bib24) 1955; 52 Larzabal, Isasti, Rodriguez-Ibabe, Uranga (bib19) 2017; 7 Calcagnotto, Ponge, Demir, Raabe (bib29) 2010; 527A Uemori (10.1016/j.msea.2019.01.105_bib10) 1994; 76–77 Thomas (10.1016/j.msea.2019.01.105_bib40) 2002; 21 Funakawa (10.1016/j.msea.2019.01.105_bib9) 2004; 44 Isasti (10.1016/j.msea.2019.01.105_bib23) 2011; 42 Pereda (10.1016/j.msea.2019.01.105_bib21) 2015; 24 Llanos (10.1016/j.msea.2019.01.105_bib36) 2015; 46 Zhang (10.1016/j.msea.2019.01.105_bib33) 2011; 529 Fernandez (10.1016/j.msea.2019.01.105_bib20) 2000; 40 Chen (10.1016/j.msea.2019.01.105_bib13) 2009; 499 Jang (10.1016/j.msea.2019.01.105_bib11) 2012; 60 Courtois (10.1016/j.msea.2019.01.105_bib41) 2006; 37 Larzabal (10.1016/j.msea.2019.01.105_bib19) 2017; 7 Campos (10.1016/j.msea.2019.01.105_bib31) 2001; 32A Chen (10.1016/j.msea.2019.01.105_bib38) 2015; 86 Altuna (10.1016/j.msea.2019.01.105_bib2) 2012; 43 Gladman (10.1016/j.msea.2019.01.105_bib34) 1999; 15 Field (10.1016/j.msea.2019.01.105_bib32) 2007; 55 Iza-Mendia (10.1016/j.msea.2019.01.105_bib1) 2012; 43 Mao (10.1016/j.msea.2019.01.105_bib17) 2010; 210 Gladman (10.1016/j.msea.2019.01.105_bib26) 1997 Li (10.1016/j.msea.2019.01.105_bib35) 2016; 677 Timokhina (10.1016/j.msea.2019.01.105_bib12) 2016; 111 Isasti (10.1016/j.msea.2019.01.105_bib30) 2014; 45A Patra (10.1016/j.msea.2019.01.105_bib14) 2017; 70 Calcagnotto (10.1016/j.msea.2019.01.105_bib29) 2010; 527A Baker (10.1016/j.msea.2019.01.105_bib37) 1959 Iza-Mendia (10.1016/j.msea.2019.01.105_bib25) 2013; 561 Freeman (10.1016/j.msea.2019.01.105_bib8) 1977; 11 Medina (10.1016/j.msea.2019.01.105_bib5) 1999; 39 Isasti (10.1016/j.msea.2019.01.105_bib4) 2014; 20 Lagneborg (10.1016/j.msea.2019.01.105_bib7) 1999; 28 Yen (10.1016/j.msea.2019.01.105_bib18) 2011; 16 Sanz (10.1016/j.msea.2019.01.105_bib6) 2017; 686 DeArdo (10.1016/j.msea.2019.01.105_bib27) 2003; 6 Pereda (10.1016/j.msea.2019.01.105_bib3) 2007; 47 Bechet (10.1016/j.msea.2019.01.105_bib24) 1955; 52 Kim (10.1016/j.msea.2019.01.105_bib16) 2013; 565 Ghosh (10.1016/j.msea.2019.01.105_bib15) 2014; 45 Gutierrez (10.1016/j.msea.2019.01.105_bib28) 2008; 56 Chen (10.1016/j.msea.2019.01.105_bib39) 2016; 114 |
| References_xml | – volume: 46 start-page: 5248 year: 2015 end-page: 5265 ident: bib36 article-title: Interaction between recovery, recrystallization, and NbC strain-induced precipitation in high-Mn steels publication-title: Metall. Mater. Trans. A contributor: fullname: López – volume: 45 start-page: 2719 year: 2014 end-page: 2731 ident: bib15 article-title: Variation in mechanical properties and heterogeneity in microstructure of high-strength ferritic steel during mill trial publication-title: Metall. Mater. Trans. A contributor: fullname: Ray – volume: 45A start-page: 4960 year: 2014 end-page: 4971 ident: bib30 article-title: Microstructural features controlling mechanical properties in Nb-Mo microalloyed steels. Part I: yield strength publication-title: Metall. Mater. Trans. A contributor: fullname: Uranga – volume: 37 start-page: 492 year: 2006 end-page: 502 ident: bib41 article-title: EELS study of niobium carbo-nitride nano-precipitates in ferrite publication-title: Micron contributor: fullname: Scott – volume: 16 start-page: 6264 year: 2011 end-page: 6274 ident: bib18 article-title: Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel publication-title: Acta Mater. contributor: fullname: Yang – volume: 686 start-page: 377 year: 2017 end-page: 390 ident: bib6 article-title: Effect of thermomechanical treatment and coiling temperature on the strengthening mechanism of low carbon steels microalloyed with Nb publication-title: Mater. Sci. Eng. A contributor: fullname: Lopez – volume: 11 start-page: 59 year: 1977 end-page: 64 ident: bib8 article-title: Strengthening of titanium steels by carbide precipitation publication-title: Met. Sci. contributor: fullname: Honeycombe – volume: 677 start-page: 340 year: 2016 end-page: 348 ident: bib35 article-title: The effect of manganese content on mechanical properties of high titanium microalloyed steels publication-title: Mater. Sci. Eng. A contributor: fullname: Wang – volume: 565 start-page: 430 year: 2013 end-page: 438 ident: bib16 article-title: Development of Ti and Mo micro-alloyed hot-rolled high strength sheet steel by controlling thermomechanical controlled processing schedule publication-title: Mater. Sci. Eng. A contributor: fullname: Lee – volume: 40 start-page: 893 year: 2000 end-page: 901 ident: bib20 article-title: Static recrystallization behavior of a wide range of austenite grain sizes in microalloyed steels publication-title: ISIJ Int. contributor: fullname: Rodriguez-Ibabe – volume: 6 start-page: 371 year: 2003 end-page: 402 ident: bib27 article-title: Niobium in modern steels publication-title: Int. Mater. Rev. contributor: fullname: DeArdo – volume: 55 start-page: 4233 year: 2007 end-page: 4241 ident: bib32 article-title: The role of annealing twins during recrystallization of Cu publication-title: Acta Mater. contributor: fullname: Lillo – volume: 47 start-page: 860 year: 2007 end-page: 868 ident: bib3 article-title: Effect of Mo on dynamic recrystallization behavior of Nb-Mo microalloyed steels publication-title: ISIJ Int. contributor: fullname: Rodriguez-Ibabe – volume: 15 start-page: 30 year: 1999 end-page: 36 ident: bib34 article-title: Precipitation hardening in metals publication-title: Mater. Sci. Technol. contributor: fullname: Gladman – volume: 44 start-page: 1945 year: 2004 end-page: 1951 ident: bib9 article-title: Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides publication-title: ISIJ Int. contributor: fullname: Maeda – ident: bib22 – volume: 114 start-page: 18 year: 2016 end-page: 29 ident: bib39 article-title: Microstructural characterization and strengthening behaviour of nanometer sized carbides in Ti-Mo microalloyed steels during continuous cooling process publication-title: Mater. Charact. contributor: fullname: Chen – volume: 52 start-page: 830 year: 1955 end-page: 836 ident: bib24 article-title: New reagent for the micrographical demonstration of the austenite grain of hardened or hardened-tempered steels publication-title: Rev. Met. contributor: fullname: Beaujard – volume: 7 start-page: 65 year: 2017 ident: bib19 article-title: Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb-Mo and Ti-Mo steels publication-title: Metals contributor: fullname: Uranga – volume: 24 start-page: 1279 year: 2015 end-page: 1293 ident: bib21 article-title: Softening kinetic in high Al and high Al-Nb-microalloyed steels publication-title: J. Mater. Eng. Perform. contributor: fullname: Lopez – volume: 60 start-page: 208 year: 2012 end-page: 217 ident: bib11 article-title: Stability of (Ti,M)C (M=Nb, V, Mo and W) carbide in steels using first-principles calculations publication-title: Acta Mater. contributor: fullname: Suh – volume: 39 start-page: 930 year: 1999 end-page: 936 ident: bib5 article-title: Influence of Ti and N contents on austenite grain control and precipitate size in structural steels publication-title: ISIJ Int. contributor: fullname: Vega – volume: 529 start-page: 62 year: 2011 end-page: 73 ident: bib33 article-title: General relationship between strength and hardness publication-title: Mater. Sci. Eng. A contributor: fullname: Zhang – volume: 32A start-page: 1245 year: 2001 end-page: 1248 ident: bib31 article-title: On strengthening mechanisms in commercial Nb-Ti hot strip steels publication-title: Metall. Mater. Trans. contributor: fullname: Kestenback – volume: 76–77 start-page: 255 year: 1994 end-page: 260 ident: bib10 article-title: AP-FIM study on the effect of Mo addition on microstructure in Ti-Nb steel publication-title: Appl. Surf. Sci. contributor: fullname: Morikawa – volume: 20 start-page: 807 year: 2014 end-page: 817 ident: bib4 article-title: Microstructural and precipitation characterization in Nb-Mo microalloyed steels: estimation of the contributions to the strength publication-title: Met. Mater. Int. contributor: fullname: Uranga – volume: 210 start-page: 1660 year: 2010 end-page: 1666 ident: bib17 article-title: Strengthening mechanisms of a new 700 MPa hot rolled Ti-microalloyed steel produced by compact strip production publication-title: J. Mater. Process. Technol. contributor: fullname: Chai – start-page: 1 year: 1959 end-page: 22 ident: bib37 article-title: Precipitation Processes in Steels, Special Report No. 64 contributor: fullname: Nutting – volume: 86 start-page: 821 year: 2015 end-page: 824 ident: bib38 article-title: Precipitation characteristics in a low-carbon vanadium-titanium-bearing steel publication-title: Steel Res. Int. contributor: fullname: Wang – volume: 43 start-page: 4571 year: 2012 end-page: 4586 ident: bib2 article-title: Precipitation of Nb in ferrite after austenite conditioning. Part II: Strengthening contribution in high-strength low-alloy (HSLA) steels publication-title: Metall. Mater. Trans. A contributor: fullname: Gutierrez – volume: 42 start-page: 3729 year: 2011 end-page: 3742 ident: bib23 article-title: Effect of composition and deformation on coarse-grained austenite transformation in Nb-Mo microalloyed steels publication-title: Metall. Mater. Trans. A contributor: fullname: Uranga – volume: 527A start-page: 2738 year: 2010 end-page: 2746 ident: bib29 article-title: Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels by 2D and 3D EBSD publication-title: Mater. Sci. Eng. contributor: fullname: Raabe – volume: 111 start-page: 222 year: 2016 end-page: 229 ident: bib12 article-title: On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques publication-title: Mater. Des. contributor: fullname: Hodgson – volume: 28 start-page: 186 year: 1999 end-page: 241 ident: bib7 article-title: Role of vanadium in microalloyed steels publication-title: Scand. J. Metall. contributor: fullname: Hutchinson – year: 1997 ident: bib26 article-title: The Physical Metallurgy of Microalloyed Steels, Chapter: Microstructure-property Relationships contributor: fullname: Gladman – volume: 56 start-page: 4682 year: 2008 end-page: 4690 ident: bib28 article-title: Work-hardening of ferrite and microstructure-based modelling of its mechanical behaviour under tension publication-title: Acta Mater. contributor: fullname: Altuna – volume: 43 start-page: 4553 year: 2012 end-page: 4570 ident: bib1 article-title: Precipitation of Nb in ferrite after austenite conditioning. Part I: Microstructural characterization publication-title: Metall. Mater. Trans. A contributor: fullname: Gutierrez – volume: 70 start-page: 1773 year: 2017 end-page: 1781 ident: bib14 article-title: Effect of coiling temperature on the microstructure and mechanical properties of hot-rolled Ti-Nb microalloyed ultra high strength steel publication-title: T. Indian I. Met. contributor: fullname: Bakshi – volume: 561 start-page: 40 year: 2013 end-page: 51 ident: bib25 article-title: Generalization of the existing relations between microstructure and yield stress from ferrite-pearlite to high strength steels publication-title: Mater. Sci. Eng. A contributor: fullname: Gutierrez – volume: 21 start-page: 109 year: 2002 end-page: 138 ident: bib40 article-title: An introduction to energy-filtered transmission microscopy publication-title: Top. Catal. contributor: fullname: Midgley – volume: 499 start-page: 162 year: 2009 end-page: 166 ident: bib13 article-title: Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides publication-title: Mater. Sci. Eng. A contributor: fullname: Wang – volume: 15 start-page: 30 year: 1999 ident: 10.1016/j.msea.2019.01.105_bib34 article-title: Precipitation hardening in metals publication-title: Mater. Sci. Technol. doi: 10.1179/026708399773002782 contributor: fullname: Gladman – volume: 52 start-page: 830 year: 1955 ident: 10.1016/j.msea.2019.01.105_bib24 article-title: New reagent for the micrographical demonstration of the austenite grain of hardened or hardened-tempered steels publication-title: Rev. Met. contributor: fullname: Bechet – volume: 76–77 start-page: 255 year: 1994 ident: 10.1016/j.msea.2019.01.105_bib10 article-title: AP-FIM study on the effect of Mo addition on microstructure in Ti-Nb steel publication-title: Appl. Surf. Sci. doi: 10.1016/0169-4332(94)90351-4 contributor: fullname: Uemori – volume: 686 start-page: 377 year: 2017 ident: 10.1016/j.msea.2019.01.105_bib6 article-title: Effect of thermomechanical treatment and coiling temperature on the strengthening mechanism of low carbon steels microalloyed with Nb publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2017.01.014 contributor: fullname: Sanz – volume: 24 start-page: 1279 year: 2015 ident: 10.1016/j.msea.2019.01.105_bib21 article-title: Softening kinetic in high Al and high Al-Nb-microalloyed steels publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-015-1387-3 contributor: fullname: Pereda – volume: 16 start-page: 6264 year: 2011 ident: 10.1016/j.msea.2019.01.105_bib18 article-title: Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel publication-title: Acta Mater. doi: 10.1016/j.actamat.2011.06.037 contributor: fullname: Yen – volume: 28 start-page: 186 year: 1999 ident: 10.1016/j.msea.2019.01.105_bib7 article-title: Role of vanadium in microalloyed steels publication-title: Scand. J. Metall. contributor: fullname: Lagneborg – volume: 45A start-page: 4960 year: 2014 ident: 10.1016/j.msea.2019.01.105_bib30 article-title: Microstructural features controlling mechanical properties in Nb-Mo microalloyed steels. Part I: yield strength publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-014-2450-7 contributor: fullname: Isasti – volume: 7 start-page: 65 year: 2017 ident: 10.1016/j.msea.2019.01.105_bib19 article-title: Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb-Mo and Ti-Mo steels publication-title: Metals doi: 10.3390/met7020065 contributor: fullname: Larzabal – volume: 32A start-page: 1245 year: 2001 ident: 10.1016/j.msea.2019.01.105_bib31 article-title: On strengthening mechanisms in commercial Nb-Ti hot strip steels publication-title: Metall. Mater. Trans. doi: 10.1007/s11661-001-0133-7 contributor: fullname: Campos – volume: 6 start-page: 371 year: 2003 ident: 10.1016/j.msea.2019.01.105_bib27 article-title: Niobium in modern steels publication-title: Int. Mater. Rev. doi: 10.1179/095066003225008833 contributor: fullname: DeArdo – volume: 11 start-page: 59 year: 1977 ident: 10.1016/j.msea.2019.01.105_bib8 article-title: Strengthening of titanium steels by carbide precipitation publication-title: Met. Sci. doi: 10.1179/msc.1977.11.2.59 contributor: fullname: Freeman – volume: 60 start-page: 208 year: 2012 ident: 10.1016/j.msea.2019.01.105_bib11 article-title: Stability of (Ti,M)C (M=Nb, V, Mo and W) carbide in steels using first-principles calculations publication-title: Acta Mater. doi: 10.1016/j.actamat.2011.09.051 contributor: fullname: Jang – volume: 677 start-page: 340 year: 2016 ident: 10.1016/j.msea.2019.01.105_bib35 article-title: The effect of manganese content on mechanical properties of high titanium microalloyed steels publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2016.09.070 contributor: fullname: Li – start-page: 1 year: 1959 ident: 10.1016/j.msea.2019.01.105_bib37 contributor: fullname: Baker – year: 1997 ident: 10.1016/j.msea.2019.01.105_bib26 contributor: fullname: Gladman – volume: 37 start-page: 492 year: 2006 ident: 10.1016/j.msea.2019.01.105_bib41 article-title: EELS study of niobium carbo-nitride nano-precipitates in ferrite publication-title: Micron doi: 10.1016/j.micron.2005.10.009 contributor: fullname: Courtois – volume: 529 start-page: 62 year: 2011 ident: 10.1016/j.msea.2019.01.105_bib33 article-title: General relationship between strength and hardness publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2011.08.061 contributor: fullname: Zhang – volume: 45 start-page: 2719 year: 2014 ident: 10.1016/j.msea.2019.01.105_bib15 article-title: Variation in mechanical properties and heterogeneity in microstructure of high-strength ferritic steel during mill trial publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-014-2226-0 contributor: fullname: Ghosh – volume: 39 start-page: 930 year: 1999 ident: 10.1016/j.msea.2019.01.105_bib5 article-title: Influence of Ti and N contents on austenite grain control and precipitate size in structural steels publication-title: ISIJ Int. doi: 10.2355/isijinternational.39.930 contributor: fullname: Medina – volume: 40 start-page: 893 year: 2000 ident: 10.1016/j.msea.2019.01.105_bib20 article-title: Static recrystallization behavior of a wide range of austenite grain sizes in microalloyed steels publication-title: ISIJ Int. doi: 10.2355/isijinternational.40.893 contributor: fullname: Fernandez – volume: 561 start-page: 40 year: 2013 ident: 10.1016/j.msea.2019.01.105_bib25 article-title: Generalization of the existing relations between microstructure and yield stress from ferrite-pearlite to high strength steels publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2012.10.012 contributor: fullname: Iza-Mendia – volume: 21 start-page: 109 year: 2002 ident: 10.1016/j.msea.2019.01.105_bib40 article-title: An introduction to energy-filtered transmission microscopy publication-title: Top. Catal. doi: 10.1023/A:1021377125838 contributor: fullname: Thomas – volume: 43 start-page: 4571 year: 2012 ident: 10.1016/j.msea.2019.01.105_bib2 article-title: Precipitation of Nb in ferrite after austenite conditioning. Part II: Strengthening contribution in high-strength low-alloy (HSLA) steels publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-012-1270-x contributor: fullname: Altuna – volume: 20 start-page: 807 year: 2014 ident: 10.1016/j.msea.2019.01.105_bib4 article-title: Microstructural and precipitation characterization in Nb-Mo microalloyed steels: estimation of the contributions to the strength publication-title: Met. Mater. Int. doi: 10.1007/s12540-014-5002-1 contributor: fullname: Isasti – volume: 565 start-page: 430 year: 2013 ident: 10.1016/j.msea.2019.01.105_bib16 article-title: Development of Ti and Mo micro-alloyed hot-rolled high strength sheet steel by controlling thermomechanical controlled processing schedule publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2012.12.055 contributor: fullname: Kim – volume: 44 start-page: 1945 year: 2004 ident: 10.1016/j.msea.2019.01.105_bib9 article-title: Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides publication-title: ISIJ Int. doi: 10.2355/isijinternational.44.1945 contributor: fullname: Funakawa – volume: 86 start-page: 821 year: 2015 ident: 10.1016/j.msea.2019.01.105_bib38 article-title: Precipitation characteristics in a low-carbon vanadium-titanium-bearing steel publication-title: Steel Res. Int. doi: 10.1002/srin.201400275 contributor: fullname: Chen – volume: 43 start-page: 4553 year: 2012 ident: 10.1016/j.msea.2019.01.105_bib1 article-title: Precipitation of Nb in ferrite after austenite conditioning. Part I: Microstructural characterization publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-012-1395-y contributor: fullname: Iza-Mendia – volume: 42 start-page: 3729 year: 2011 ident: 10.1016/j.msea.2019.01.105_bib23 article-title: Effect of composition and deformation on coarse-grained austenite transformation in Nb-Mo microalloyed steels publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-011-0624-0 contributor: fullname: Isasti – volume: 56 start-page: 4682 year: 2008 ident: 10.1016/j.msea.2019.01.105_bib28 article-title: Work-hardening of ferrite and microstructure-based modelling of its mechanical behaviour under tension publication-title: Acta Mater. doi: 10.1016/j.actamat.2008.05.023 contributor: fullname: Gutierrez – volume: 114 start-page: 18 year: 2016 ident: 10.1016/j.msea.2019.01.105_bib39 article-title: Microstructural characterization and strengthening behaviour of nanometer sized carbides in Ti-Mo microalloyed steels during continuous cooling process publication-title: Mater. Charact. doi: 10.1016/j.matchar.2016.01.023 contributor: fullname: Chen – volume: 55 start-page: 4233 year: 2007 ident: 10.1016/j.msea.2019.01.105_bib32 article-title: The role of annealing twins during recrystallization of Cu publication-title: Acta Mater. doi: 10.1016/j.actamat.2007.03.021 contributor: fullname: Field – volume: 47 start-page: 860 year: 2007 ident: 10.1016/j.msea.2019.01.105_bib3 article-title: Effect of Mo on dynamic recrystallization behavior of Nb-Mo microalloyed steels publication-title: ISIJ Int. doi: 10.2355/isijinternational.47.860 contributor: fullname: Pereda – volume: 111 start-page: 222 year: 2016 ident: 10.1016/j.msea.2019.01.105_bib12 article-title: On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques publication-title: Mater. Des. doi: 10.1016/j.matdes.2016.08.086 contributor: fullname: Timokhina – volume: 46 start-page: 5248 year: 2015 ident: 10.1016/j.msea.2019.01.105_bib36 article-title: Interaction between recovery, recrystallization, and NbC strain-induced precipitation in high-Mn steels publication-title: Metall. Mater. Trans. A doi: 10.1007/s11661-015-3066-2 contributor: fullname: Llanos – volume: 499 start-page: 162 year: 2009 ident: 10.1016/j.msea.2019.01.105_bib13 article-title: Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides publication-title: Mater. Sci. Eng. A doi: 10.1016/j.msea.2007.11.110 contributor: fullname: Chen – volume: 70 start-page: 1773 year: 2017 ident: 10.1016/j.msea.2019.01.105_bib14 article-title: Effect of coiling temperature on the microstructure and mechanical properties of hot-rolled Ti-Nb microalloyed ultra high strength steel publication-title: T. Indian I. Met. doi: 10.1007/s12666-016-0975-8 contributor: fullname: Patra – volume: 210 start-page: 1660 year: 2010 ident: 10.1016/j.msea.2019.01.105_bib17 article-title: Strengthening mechanisms of a new 700 MPa hot rolled Ti-microalloyed steel produced by compact strip production publication-title: J. Mater. Process. Technol. doi: 10.1016/j.jmatprotec.2010.05.018 contributor: fullname: Mao – volume: 527A start-page: 2738 year: 2010 ident: 10.1016/j.msea.2019.01.105_bib29 article-title: Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels by 2D and 3D EBSD publication-title: Mater. Sci. Eng. doi: 10.1016/j.msea.2010.01.004 contributor: fullname: Calcagnotto |
| SSID | ssj0001405 |
| Score | 2.5115695 |
| Snippet | Steels alloyed with high Ti addition levels present an interesting combination of high strength and formability, principally due to the high levels of... |
| SourceID | proquest crossref elsevier |
| SourceType | Aggregation Database Publisher |
| StartPage | 386 |
| SubjectTerms | Coiling Cooling rate Dilatometry Dislocations High strength low alloy steels High Ti steels Mathematical analysis Mechanical properties Microalloying Microstructural characterization Niobium Precipitates Precipitation hardening Precipitation hardening steels Steel Titanium |
| Title | Effect of coiling conditions on the strengthening mechanisms of Nb microalloyed steels with high Ti addition levels |
| URI | https://dx.doi.org/10.1016/j.msea.2019.01.105 https://www.proquest.com/docview/2209580114 |
| Volume | 748 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV07T8MwELb6WGBAPEWhIA9sKDTv2mNVURUQXWilblbs2CiIJhUpAwu_nbvEQYAQA1MUv2Sdz_ewvzsTcsGMTCSoLoelgXJAQyVO4unIAdWpZSgNqCQ8h7yfxdNFeLuMli0ybmJhEFZpZX8t0ytpbUsGlpqDdZYNHlwO6goccjBB8LqNtUkX1JEPrN0d3dxNZ58CGXyICskI7R3sYGNnapjXCjgKEV4cs3d6-Ird7_rph6Su1M9kl-xYu5GO6qntkZbO98n2l2yCB6SsMxHTwlBVZBhmDl-8kUbOokVOwdajGBuSP2LKA6xfaQz8zcpVib1mkq4Qn4d38W86hbYaZkbxqJZiWmM6zyjij3BA-oxoo_KQLCbX8_HUsW8qOCrw2QbkiTHg9KWxlgq2KqwUl-mQSxZ4cZyylEvt-0pjljiujJtE2kiuoaHhQQrWS3BEOnmR62NCjfKNYgGDumEoIy_xXNdwMD9VGjIe8h65bCgp1nXqDNFgyp4E0l0g3YXrQVnUI1FDbPGNAQTI9j_79ZuVEXb7lcL3wXJk6Oud_HPYU7KFfxXaLOyTzublVZ-B-bGR56R99e6dWyb7AOot21I |
| link.rule.ids | 315,783,787,4510,24129,27937,27938,45598,45692 |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV07T8MwELZKGYAB8RSFAh7YUGjetUdUURVou9BK3azYsVEQSSpSBhZ-O3d5iIcQA1Mk-2xF5_M97O_OhFwwIyMJpstisacssFCRFTk6sMB0aulLAyYJzyEn03A09-8WwaJFBk0uDMIqa91f6fRSW9ctvZqbvWWS9B5sDuYKAnJwQfC6ja2RdR_LjYNQX71_4jwggihxjEBtIXmdOVOBvFKQJ8R3cazd6eAbdr9bpx96ujQ-wx2yXXuN9Lr6sV3S0tke2fpSS3CfFFUdYpobqvIEk8zhi_fRKFc0zyh4ehQzQ7JHLHiA_anGtN-kSAscNZU0RXQe3sS_6RhoNfwZxYNaikWN6SyhiD7CCekzYo2KAzIf3swGI6t-UcFSnstWoE2MgZAvDrVUsFFhnbiM-1wyzwnDmMVcatdVGmvEcWXsKNBGcg2Ehnsx-C7eIWlneaaPCDXKNYp5DPr6vgycyLFtw8H5VLHPuM875LLhpFhWhTNEgyh7Esh3gXwXtgNtQYcEDbPFt-UXoNn_HNdtVkbUm68Qrgt-I8NI7_if056TjdFsMhbj2-n9CdnEnhJ35ndJe_Xyqk_BEVnJs1LQPgDmYNwr |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effect+of+coiling+conditions+on+the+strengthening+mechanisms+of+Nb+microalloyed+steels+with+high+Ti+addition+levels&rft.jtitle=Materials+science+%26+engineering.+A%2C+Structural+materials+%3A+properties%2C+microstructure+and+processing&rft.au=Garc%C3%ADa-Sesma%2C+Leire&rft.au=L%C3%B3pez%2C+Beatriz&rft.au=Pereda%2C+Beatriz&rft.date=2019-03-04&rft.issn=0921-5093&rft.volume=748&rft.spage=386&rft.epage=395&rft_id=info:doi/10.1016%2Fj.msea.2019.01.105&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_msea_2019_01_105 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0921-5093&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0921-5093&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0921-5093&client=summon |