Single- and Dual-Band Bandpass Filters Using Coupled Stepped-Impedance Resonators With Embedded Coupled-Lines

• Published in: IEEE microwave and wireless components letters Vol. 26; no. 9; pp. 675 - 677
• Main Authors: He Zhu, Abbosh, Amin M.
• Format: Journal Article
• Language: English
• Published: IEEE 01.09.2016
• Subjects: Band-pass filters; Bandpass filter; Bandpass filters; Bandwidth; Construction; Couplings; Dual band; dual-band filter; dual-mode resonators; Insertion loss; Local area networks; Microwaves; Passband; Resonant frequency; Resonators; single-band filter; transmission zeros; Wireless communication; Wireless networks
• DOI: 10.1109/LMWC.2016.2597180
• ISSN: 1531-1309

A pair of coupled stepped-impedance resonators and its use to build single- and dual-band bandpass filter (BPF) is presented. To that end, two symmetrical stepped-impedance resonators with two embedded coupled-line sections are used. The adopted resonators are coupled at the two open-ended edges. The first even-mode resonant mode can be suppressed or excited based on whether it is required to realize a single- or dual-band response. Sharp passband selectivity and stopband harmonic suppression are achieved due to the existence of multiple transmission zeros. For verification, single- and dual-band filters using the proposed resonator are designed, fabricated and tested. The experimental results show a passband of 2.34-2.62 GHz (centered at 2.45 GHz for WLAN system), less than 1.5 dB insertion loss for the single-band filter; the dual-band design has two passbands ranged from 2.28-2.67 GHz and 3.35-3.63 GHz with less than 1.2 dB insertion loss for WLAN and WiMAX systems.