Fatigue crack initiation detection in ductile cast iron crankshaft under rotating bending fatigue test using the acoustic emission entropy method
•The AE entropy method is more practical for real-time structural health monitoring applications.•In the AE entropy method, the maximum entropy was found to be constant during the degradation period.•The Shannon entropy is more useful for detecting fatigue fractures under different loading condition...
Saved in:
| Published in | Engineering failure analysis Vol. 144; p. 106981 |
|---|---|
| Main Authors | , , , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier Ltd
01.02.2023
|
| Subjects | |
| Online Access | Get full text |
Cover
Loading…
| Abstract | •The AE entropy method is more practical for real-time structural health monitoring applications.•In the AE entropy method, the maximum entropy was found to be constant during the degradation period.•The Shannon entropy is more useful for detecting fatigue fractures under different loading conditions.•The logarithmic entropy curves have more suitable for detecting fatigue crack initiation points.•Fatigue crack initiation life estimation based on crack density is a method for verifying the results of the AE entropy.
The subject of this study was fatigue crack initiation detection in a ductile cast iron (EN-GJS-700–2) crankshaft. The specimens extracted from the crank web of a car crankshaft were exposed to the four-point rotating bending fatigue test with fully-reversed loading as per iSO-1143. The fatigue crack initiation estimation was performed by (1) using acoustic emission features, (2) utilizing the acoustic emission entropy method, and finally, (3) using crack density measured in field emission scanning electron microscopy images. In this research, the sampling rate in the acoustic emission features method was 1 million data per second, which was reduced to 10 data per second in the acoustic emission entropy method. Therefore, in the acoustic emission entropy method, the data volume was greatly reduced and it was much more practical and cost-effective for real-time health monitoring. As a remarkable issue, the average difference percentage between the Shannon entropy and the Kullback-Leibler relative entropy was 32% and 35%, respectively, compared to AE features for the fatigue crack initiation prediction. |
|---|---|
| AbstractList | •The AE entropy method is more practical for real-time structural health monitoring applications.•In the AE entropy method, the maximum entropy was found to be constant during the degradation period.•The Shannon entropy is more useful for detecting fatigue fractures under different loading conditions.•The logarithmic entropy curves have more suitable for detecting fatigue crack initiation points.•Fatigue crack initiation life estimation based on crack density is a method for verifying the results of the AE entropy.
The subject of this study was fatigue crack initiation detection in a ductile cast iron (EN-GJS-700–2) crankshaft. The specimens extracted from the crank web of a car crankshaft were exposed to the four-point rotating bending fatigue test with fully-reversed loading as per iSO-1143. The fatigue crack initiation estimation was performed by (1) using acoustic emission features, (2) utilizing the acoustic emission entropy method, and finally, (3) using crack density measured in field emission scanning electron microscopy images. In this research, the sampling rate in the acoustic emission features method was 1 million data per second, which was reduced to 10 data per second in the acoustic emission entropy method. Therefore, in the acoustic emission entropy method, the data volume was greatly reduced and it was much more practical and cost-effective for real-time health monitoring. As a remarkable issue, the average difference percentage between the Shannon entropy and the Kullback-Leibler relative entropy was 32% and 35%, respectively, compared to AE features for the fatigue crack initiation prediction. |
| ArticleNumber | 106981 |
| Author | Azadi, Mohammad Ghasemi-Ghalebahman, Ahmad Hosseini, Seyed Morteza Jafari, Seyed Mohammad |
| Author_xml | – sequence: 1 givenname: Seyed Morteza surname: Hosseini fullname: Hosseini, Seyed Morteza organization: Faculty of Mechanical Engineering, Semnan University, Semnan, Iran – sequence: 2 givenname: Mohammad surname: Azadi fullname: Azadi, Mohammad organization: Faculty of Mechanical Engineering, Semnan University, Semnan, Iran – sequence: 3 givenname: Ahmad surname: Ghasemi-Ghalebahman fullname: Ghasemi-Ghalebahman, Ahmad email: ghasemi@semnan.ac.ir organization: Faculty of Mechanical Engineering, Semnan University, Semnan, Iran – sequence: 4 givenname: Seyed Mohammad surname: Jafari fullname: Jafari, Seyed Mohammad organization: Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, Tehran, Iran |
| BookMark | eNqNkEFOwzAQRS0EEm3hDuYAKXbSOPEKoYoCUiU2sLYcZ9K6TZ3KdpB6DG7MpO0CserCmu-v-V-aNybXrnNAyANnU864eNxMwa0abVvtdDtNWZqiL2TJr8iIl0WWcCn4NeosZ4nIWHFLxiFsGGNFKvmI_Cx0tKseqPHabKl1Nlp0OkdriGCOyuKnR9nilg6RWo8m7rttWOsm0t7V4KnvIgbdilbg6mE25-YImOnDYMU1UG26PkRrKOxsCEM_uOi7_YHuIK67-o7cNLoNcH-eE_K1ePmcvyXLj9f3-fMyMVnKY8K5ZrmZ8WpWpkxUjchnEooaHwopcgMCSlOzqiqELCSDpkKnKEGLXEiTZhPydOo1vgvBQ6OMjcfTo0eeijM1EFYb9YewGgirE2FskP8a9t7utD9clJ2fsoAnflvwKhgLzkBtPWJXdWcvaPkFtNCkSw |
| CitedBy_id | crossref_primary_10_1016_j_ymssp_2024_111658 crossref_primary_10_1371_journal_pone_0291135 crossref_primary_10_1080_10589759_2024_2389930 crossref_primary_10_1007_s10921_024_01079_4 crossref_primary_10_1007_s11071_024_09986_x crossref_primary_10_1115_1_4065662 crossref_primary_10_1016_j_engfailanal_2024_108655 crossref_primary_10_3390_app14167410 |
| Cites_doi | 10.1063/1.4959066 10.1016/j.engfailanal.2017.12.017 10.1177/0021998305050423 10.1016/j.ijsolstr.2015.06.032 10.1016/j.ymssp.2017.08.007 10.1016/j.engfailanal.2015.03.014 10.1016/j.engfailanal.2015.04.014 10.1016/j.ymssp.2011.02.018 10.1016/j.engfailanal.2009.03.019 10.1007/s00707-020-02911-4 10.1016/j.ymssp.2013.03.017 10.1007/s42452-019-1694-7 10.1016/j.conbuildmat.2014.05.015 10.1016/j.engfailanal.2017.06.001 10.1016/j.matdes.2014.10.026 10.1007/978-3-540-69972-9 10.1103/RevModPhys.22.56 10.1111/ffe.13214 10.1016/j.engfailanal.2005.11.005 10.1016/j.conbuildmat.2016.02.206 10.1016/j.engfailanal.2013.01.016 10.1002/j.1538-7305.1948.tb01338.x 10.1016/j.engfracmech.2009.09.016 10.12783/shm2017/14112 10.1115/1.2792650 10.1016/j.probengmech.2011.11.006 10.1016/j.engfailanal.2017.06.010 10.1016/j.compositesb.2011.12.013 10.1016/0734-189X(85)90125-2 10.1007/s12540-019-00498-7 10.3390/e18080280 10.1016/j.compositesb.2013.06.048 10.1109/18.119732 10.1016/S0257-8972(99)00211-X 10.1016/j.compositesb.2018.09.103 10.1111/ffe.13412 10.3390/app7060562 10.1016/j.phpro.2011.03.063 |
| ContentType | Journal Article |
| Copyright | 2022 Elsevier Ltd |
| Copyright_xml | – notice: 2022 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.engfailanal.2022.106981 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1873-1961 |
| ExternalDocumentID | 10_1016_j_engfailanal_2022_106981 S1350630722009487 |
| GroupedDBID | --K --M .~1 0R~ 1B1 1~. 1~5 29G 4.4 457 4G. 5GY 5VS 7-5 71M 8P~ 9JN AACTN AAEDT AAEDW AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AAXUO ABFNM ABMAC ABTAH ABXDB ABYKQ ACDAQ ACGFS ACNNM ACRLP ADBBV ADEZE ADMUD ADTZH AEBSH AECPX AEKER AENEX AFFNX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJBFU AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ ASPBG AVWKF AXJTR AZFZN BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 F5P FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG ROL RPZ SDF SDG SDP SES SET SEW SPC SPCBC SST SSZ T5K WUQ XPP XSW ZMT ZY4 ~G- AATTM AAXKI AAYWO AAYXX ABJNI ABWVN ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFJKZ AFPUW AFXIZ AGCQF AGQPQ AGRNS AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP BNPGV CITATION SSH |
| ID | FETCH-LOGICAL-c321t-11a05c41b48206bf6549e7d9e7549965ce6e8cd0bb769790efbe6e78ea6569c23 |
| IEDL.DBID | .~1 |
| ISSN | 1350-6307 |
| IngestDate | Tue Jul 01 03:47:55 EDT 2025 Thu Apr 24 22:48:37 EDT 2025 Fri Feb 23 02:39:38 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Acoustic emission entropy Real-time health monitoring Rotating bending fatigue test Ductile cast iron Field Emission Scanning Electron Microscopy |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c321t-11a05c41b48206bf6549e7d9e7549965ce6e8cd0bb769790efbe6e78ea6569c23 |
| ParticipantIDs | crossref_citationtrail_10_1016_j_engfailanal_2022_106981 crossref_primary_10_1016_j_engfailanal_2022_106981 elsevier_sciencedirect_doi_10_1016_j_engfailanal_2022_106981 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | February 2023 2023-02-00 |
| PublicationDateYYYYMMDD | 2023-02-01 |
| PublicationDate_xml | – month: 02 year: 2023 text: February 2023 |
| PublicationDecade | 2020 |
| PublicationTitle | Engineering failure analysis |
| PublicationYear | 2023 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Fonte, Duarte, Anes, Freitas, Reis (b0030) 2015; 56 Farhidzadeh, Mpalaskas, Matikas, Farhidzadeh, Aggelis (b0140) 2014; 67 Metallic materials - Rotating bar bending fatigue testing, Standard No. ISO 1143, (2010), ISO International Standard. International Conference on Manufacturing Engineering, Tehran, Iran. J. V. Stebut, F. Lapostolle, M. Bucsa, H. Vallen, Acoustic emission monitoring of single cracking events and associated damage mechanism analysis in indentation and scratch testing, Surface and Coatings Technology 116–119 (1999) 160-171. Chai, Zhang, Duan (b0200) 2018; 100 S.M. Hosseini, A. Ghasemi-Ghalebahman, M. Azadi, S.M. Jafari, Introduction of acoustic emission entropy to detect cracks in ductile cast iron under three-point bending load as a non-destructive test technique, The 18 PCI-2 Based AE System User’s Manual Rev 3, Physical Acoustic Corporation (PAC), Princeton Junction, New Jersey, USA, (2007). Kordatos, Aggelis, Matikas (b0130) 2012; 43 A. Bravo, L. Toubal, D. Koffi, F. Erchiqui, Development of novel green and biocomposite materials: Tensile and flexural properties and damage analysis using acoustic emission, Mater. Design (1980-2015) 66 (2015) 16–28. Iziumova, Vshivkov, Prokhorov (b0090) 2021; 232 Hosseini, Ghasemi-Ghalebahman, Azadi, Jafari (b0205) 2021; 127 C.U. Grosse, M. Ohtsu, Acoustic Emission Testing, First ed., Springer, ISBN: 978-3-540-69895-1, (2008). Bridgman (b0155) 1950; 22 Witek, Sikora, Stachowicz, Trzepiecinski (b0015) 2017; 82 Silva, Devezas, Silva, Ferreira (b0125) 2005; 39 . Kapur, Sahoo, Wong (b0100) 1985; 29 Rezanezhad, Azadi, Azadi (b0250) 2021; 27 Tanvir, Sattar, Mba, Edwards (b0195) 2020; 2 Pomponi, Vinogradov (b0085) 2013; 40 M.R. Sabuncu, Entropy-Based Image Registration, Ph.D. Thesis, Princeton University, (2004), Princeton, NJ, USA. D'Angela, Ercolino (b0190) 2021; 44 Guan, Giffin, Jha, Liu (b0120) 2012; 29 Sauerbrunn, Kahirdeh, Yun, Modarres (b0180) 2017; 7 A. Ghasemi-Ghalebahman, H. Sayar, M. Azadi, S.M. Jafari, Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission, J. Sci. Technol. Compos., 5 (2018) 143–152. Koehler, Partes, Seefeld, Vollertsen (b0025) 2011; 12 Fonte, Li, Reis, Freitas (b0005) 2013; 35 Villanueva, Espadafor, Cruz-Peragon, Garcia (b0020) 2011; 25 Azadi, Sayar, Ghasemi-Ghalebahman, Jafari (b0070) 2019; 158 Coifman, Wickerhauser (b0105) 1992; 38 D’Angela, Ercolino, Bellini, Cocco, Iacoviello (b0170) 2020; 43 Elforjani, Mba (b0115) 2010; 77 Fonte, Infante, Reis, Freitas (b0010) 2017; 82 Kahirdeh, Khonsari (b0145) 2014; 61 Basaran, Yan (b0160) 1998; 120 ASTM E976-10, Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response, ASTM International. F.J. Espadafor, J.B. Villanueva, M.T. Garcia, Analysis of a diesel generator crankshaft failure, Eng. Fail. Anal., 16 (2009) 2333–2341. National Conference and 7 Kahirdeh, Khonsari (b0150) 2015; 77 Kahirdeh, Sauerbrunn, Modarres (b0175) 2016; 1757 ASTM E1316-00, Standard Terminology for Nondestructive Examinations, ASTM International. Fonte, Anes, Duarte, Reis, Freitas (b0045) 2015; 56 M. Azadi, M. Alizadeh, S.M. Jafari, A. Farrokhabadi, Cumulative acoustic emission energy for damage detection in composites reinforced by carbon fibers within low-cycle fatigue regime at various displacement amplitudes and rates, Polym. Polym. Compos., Jan. (2021). Shannon (b0095) 1948; 27 Asi (b0040) 2006; 13 D'Angela, Ercolino, Bellini, Cocco, Iacoviello (b0225) 2021; 30 Noorsuhada (b0065) 2016; 112 R.I. Stephens, A. Fatemi, R.R. Stephens, H.O. Fuchs, Metal Fatigue in Engineering, 2nd Edition, Wiley, November 2000, ISBN: 978-0-471-51059-8. Kahirdeh, Khonsari (b0165) 2016; 18 A. Kahirdeh, H. Yun, M. Modarres, Degradation Entropy: An Acoustic Emission Based Approach to Structural Health Assessment, International Workshop on Structural Health Monitoring (IWSHM17), Stanford University, CA, USA. Khan, Sunichi, Hasan (b0220) 2014; 4 Khameneh, Azadi (b0050) 2018; 85 Silva (10.1016/j.engfailanal.2022.106981_b0125) 2005; 39 10.1016/j.engfailanal.2022.106981_b0060 D’Angela (10.1016/j.engfailanal.2022.106981_b0170) 2020; 43 Farhidzadeh (10.1016/j.engfailanal.2022.106981_b0140) 2014; 67 Iziumova (10.1016/j.engfailanal.2022.106981_b0090) 2021; 232 Kahirdeh (10.1016/j.engfailanal.2022.106981_b0165) 2016; 18 Fonte (10.1016/j.engfailanal.2022.106981_b0045) 2015; 56 Fonte (10.1016/j.engfailanal.2022.106981_b0010) 2017; 82 10.1016/j.engfailanal.2022.106981_b0185 Sauerbrunn (10.1016/j.engfailanal.2022.106981_b0180) 2017; 7 Tanvir (10.1016/j.engfailanal.2022.106981_b0195) 2020; 2 Rezanezhad (10.1016/j.engfailanal.2022.106981_b0250) 2021; 27 Pomponi (10.1016/j.engfailanal.2022.106981_b0085) 2013; 40 D'Angela (10.1016/j.engfailanal.2022.106981_b0225) 2021; 30 Coifman (10.1016/j.engfailanal.2022.106981_b0105) 1992; 38 Witek (10.1016/j.engfailanal.2022.106981_b0015) 2017; 82 10.1016/j.engfailanal.2022.106981_b0215 10.1016/j.engfailanal.2022.106981_b0055 10.1016/j.engfailanal.2022.106981_b0210 Fonte (10.1016/j.engfailanal.2022.106981_b0005) 2013; 35 10.1016/j.engfailanal.2022.106981_b0135 Kordatos (10.1016/j.engfailanal.2022.106981_b0130) 2012; 43 10.1016/j.engfailanal.2022.106981_b0080 Khan (10.1016/j.engfailanal.2022.106981_b0220) 2014; 4 Kapur (10.1016/j.engfailanal.2022.106981_b0100) 1985; 29 Villanueva (10.1016/j.engfailanal.2022.106981_b0020) 2011; 25 Kahirdeh (10.1016/j.engfailanal.2022.106981_b0150) 2015; 77 Guan (10.1016/j.engfailanal.2022.106981_b0120) 2012; 29 Hosseini (10.1016/j.engfailanal.2022.106981_b0205) 2021; 127 Kahirdeh (10.1016/j.engfailanal.2022.106981_b0145) 2014; 61 Chai (10.1016/j.engfailanal.2022.106981_b0200) 2018; 100 Noorsuhada (10.1016/j.engfailanal.2022.106981_b0065) 2016; 112 10.1016/j.engfailanal.2022.106981_b0245 Asi (10.1016/j.engfailanal.2022.106981_b0040) 2006; 13 Basaran (10.1016/j.engfailanal.2022.106981_b0160) 1998; 120 10.1016/j.engfailanal.2022.106981_b0240 Bridgman (10.1016/j.engfailanal.2022.106981_b0155) 1950; 22 D'Angela (10.1016/j.engfailanal.2022.106981_b0190) 2021; 44 Elforjani (10.1016/j.engfailanal.2022.106981_b0115) 2010; 77 Fonte (10.1016/j.engfailanal.2022.106981_b0030) 2015; 56 10.1016/j.engfailanal.2022.106981_b0235 Azadi (10.1016/j.engfailanal.2022.106981_b0070) 2019; 158 Shannon (10.1016/j.engfailanal.2022.106981_b0095) 1948; 27 Koehler (10.1016/j.engfailanal.2022.106981_b0025) 2011; 12 10.1016/j.engfailanal.2022.106981_b0110 10.1016/j.engfailanal.2022.106981_b0035 Khameneh (10.1016/j.engfailanal.2022.106981_b0050) 2018; 85 Kahirdeh (10.1016/j.engfailanal.2022.106981_b0175) 2016; 1757 10.1016/j.engfailanal.2022.106981_b0075 10.1016/j.engfailanal.2022.106981_b0230 |
| References_xml | – volume: 56 start-page: 51 year: 2015 end-page: 57 ident: b0030 article-title: On the assessment of fatigue life of marine diesel engine crankshafts publication-title: Eng. Fail. Anal. – volume: 13 start-page: 1260 year: 2006 end-page: 1267 ident: b0040 article-title: Failure analysis of a crankshaft made from ductile cast iron publication-title: Eng. Fail. Anal. – volume: 61 start-page: 375 year: 2014 end-page: 382 ident: b0145 article-title: Criticality of degradation in composite materials subjected to cyclic loading publication-title: Compos. B Eng. – volume: 67 start-page: 129 year: 2014 end-page: 138 ident: b0140 article-title: Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features publication-title: Construct. Build. Mater. – volume: 27 start-page: 379 year: 1948 end-page: 423 ident: b0095 article-title: A mathematical theory of communication publication-title: Bell Syst. Tech. J. – volume: 39 start-page: 1261 year: 2005 end-page: 1281 ident: b0125 article-title: Mechanical characterization of composites with embedded optical fibers publication-title: J. Compos. Mater. – volume: 82 start-page: 703 year: 2017 end-page: 712 ident: b0015 article-title: Stress and failure analysis of the crankshaft of diesel engine publication-title: Eng. Fail. Anal. – volume: 127 year: 2021 ident: b0205 article-title: Crack initiation detection in crankshaft ductile cast iron based on information entropy of acoustic emission signals under tensile loading publication-title: Eng. Fail. Anal. – reference: ASTM E1316-00, Standard Terminology for Nondestructive Examinations, ASTM International. – volume: 112 start-page: 424 year: 2016 end-page: 439 ident: b0065 article-title: An overview on fatigue damage assessment of reinforced concrete structures with the aid of acoustic emission technique publication-title: Constr. Build. Mater. – reference: National Conference and 7 – volume: 40 start-page: 791 year: 2013 end-page: 804 ident: b0085 article-title: A real-time approach to acoustic emission clustering publication-title: Mech. Syst. Sig. Process. – reference: A. Ghasemi-Ghalebahman, H. Sayar, M. Azadi, S.M. Jafari, Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission, J. Sci. Technol. Compos., 5 (2018) 143–152. – reference: M.R. Sabuncu, Entropy-Based Image Registration, Ph.D. Thesis, Princeton University, (2004), Princeton, NJ, USA. – volume: 232 start-page: 1853 year: 2021 end-page: 1861 ident: b0090 article-title: Heat dissipation and acoustic emission features of titanium alloys in cyclic deformation mode publication-title: Acta Mech. – volume: 44 start-page: 1041 year: 2021 end-page: 1058 ident: b0190 article-title: Acoustic emission entropy: An innovative approach for structural health monitoring of fracture-critical metallic components subjected to fatigue loading publication-title: Fatigue Fract. Eng. Mater. Struct. – volume: 43 start-page: 2676 year: 2012 end-page: 2686 ident: b0130 article-title: Monitoring mechanical damage in structural materials using complementary NDE techniques based on thermography and acoustic emission publication-title: Compos. B Eng. – volume: 29 start-page: 157 year: 2012 end-page: 166 ident: b0120 article-title: Maximum relative entropy-based probabilistic inference in fatigue crack damage prognostics publication-title: Probab. Eng. Mech. – volume: 77 start-page: 112 year: 2010 end-page: 127 ident: b0115 article-title: Accelerated natural fault diagnosis in slow speed bearings with acoustic emission publication-title: Eng. Fract. Mech. – volume: 77 start-page: 74 year: 2015 end-page: 85 ident: b0150 article-title: Energy dissipation in the course of the fatigue degradation: Mathematical derivation and experimental quantification publication-title: Int. J. Solids Struct. – reference: PCI-2 Based AE System User’s Manual Rev 3, Physical Acoustic Corporation (PAC), Princeton Junction, New Jersey, USA, (2007). – volume: 100 start-page: 617 year: 2018 end-page: 629 ident: b0200 article-title: A new qualitative acoustic emission parameter based on Shannon’s entropy for damage monitoring publication-title: Mech. Syst. Sig. Process. – reference: Metallic materials - Rotating bar bending fatigue testing, Standard No. ISO 1143, (2010), ISO International Standard. – reference: ASTM E976-10, Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response, ASTM International. – volume: 2 start-page: 138 year: 2020 ident: b0195 article-title: Identification of fatigue damage evaluation using entropy of acoustic emission waveform publication-title: SN Applied Sciences – reference: International Conference on Manufacturing Engineering, Tehran, Iran. – reference: J. V. Stebut, F. Lapostolle, M. Bucsa, H. Vallen, Acoustic emission monitoring of single cracking events and associated damage mechanism analysis in indentation and scratch testing, Surface and Coatings Technology 116–119 (1999) 160-171. – volume: 56 start-page: 109 year: 2015 end-page: 115 ident: b0045 article-title: Crankshaft failure analysis of a boxer diesel motor publication-title: Eng. Fail. Anal. – volume: 43 start-page: 1038 year: 2020 end-page: 1050 ident: b0170 article-title: Characterization of the damaging micro-mechanisms in a pearlitic ductile cast iron and damage assessment by acoustic emission testing publication-title: Fatigue Fract. Eng. Mater. Struct. – reference: A. Kahirdeh, H. Yun, M. Modarres, Degradation Entropy: An Acoustic Emission Based Approach to Structural Health Assessment, International Workshop on Structural Health Monitoring (IWSHM17), Stanford University, CA, USA. – volume: 35 start-page: 147 year: 2013 end-page: 152 ident: b0005 article-title: Crankshaft failure analysis of a motor vehicle publication-title: Eng. Fail. Anal. – reference: C.U. Grosse, M. Ohtsu, Acoustic Emission Testing, First ed., Springer, ISBN: 978-3-540-69895-1, (2008). – reference: S.M. Hosseini, A. Ghasemi-Ghalebahman, M. Azadi, S.M. Jafari, Introduction of acoustic emission entropy to detect cracks in ductile cast iron under three-point bending load as a non-destructive test technique, The 18 – volume: 12 start-page: 512 year: 2011 end-page: 518 ident: b0025 article-title: Influence of Laser Reconditioning on Fatigue Properties of Crankshafts publication-title: Phys. Procedia – volume: 27 start-page: 860 year: 2021 end-page: 870 ident: b0250 article-title: Influence of Heat Treatment on High-Cycle Fatigue and Fracture Behaviors of Piston Aluminum Alloy Under Fully-Reversed Cyclic Bending publication-title: Met. Mater. Int. – volume: 22 start-page: 56 year: 1950 end-page: 63 ident: b0155 article-title: The thermodynamics of plastic deformation and generalized entropy publication-title: Rev. Mod. Phys. – volume: 30 year: 2021 ident: b0225 article-title: Failure criteria for real-time assessment of ductile cast irons subjected to various loading conditions publication-title: Smart Mater. Struct. – reference: A. Bravo, L. Toubal, D. Koffi, F. Erchiqui, Development of novel green and biocomposite materials: Tensile and flexural properties and damage analysis using acoustic emission, Mater. Design (1980-2015) 66 (2015) 16–28. – volume: 1757 year: 2016 ident: b0175 article-title: Acoustic emission entropy as a measure of damage in materials publication-title: AIP Conf. Proc. – volume: 38 start-page: 713 year: 1992 end-page: 718 ident: b0105 article-title: Entropy-based algorithms for best basis selection publication-title: IEEE Trans. Inf. Theory – volume: 7 start-page: 562 year: 2017 ident: b0180 article-title: Damage Assessment Using Information Entropy of Individual Acoustic Emission Waveforms during Cyclic Fatigue Loading publication-title: Appl. Sci. – volume: 85 start-page: 189 year: 2018 end-page: 200 ident: b0050 article-title: Evaluation of high-cycle bending fatigue and fracture behaviors in EN-GJS700-2 ductile cast iron of crankshafts publication-title: Eng. Fail. Anal. – reference: R.I. Stephens, A. Fatemi, R.R. Stephens, H.O. Fuchs, Metal Fatigue in Engineering, 2nd Edition, Wiley, November 2000, ISBN: 978-0-471-51059-8. – reference: M. Azadi, M. Alizadeh, S.M. Jafari, A. Farrokhabadi, Cumulative acoustic emission energy for damage detection in composites reinforced by carbon fibers within low-cycle fatigue regime at various displacement amplitudes and rates, Polym. Polym. Compos., Jan. (2021). – reference: . – volume: 158 start-page: 448 year: 2019 end-page: 458 ident: b0070 article-title: Tensile loading rate effect on mechanical properties and failure mechanisms in open-hole carbon fiber reinforced polymer composites by acoustic emission approach publication-title: Compos. B Eng. – volume: 120 start-page: 379 year: 1998 end-page: 384 ident: b0160 article-title: A thermodynamic framework for damage mechanics of solder joints publication-title: J. Electron. Packag. – volume: 82 start-page: 681 year: 2017 end-page: 686 ident: b0010 article-title: Failure mode analysis of a diesel motor crankshaft publication-title: Eng. Fail. Anal. – volume: 25 start-page: 3168 year: 2011 end-page: 3185 ident: b0020 article-title: A methodology for cracks identification in large crankshafts publication-title: Mech. Syst. Sig. Process. – volume: 18 start-page: 280 year: 2016 ident: b0165 article-title: Acoustic Entropy of the Materials in the Course of Degradation publication-title: Entropy – reference: F.J. Espadafor, J.B. Villanueva, M.T. Garcia, Analysis of a diesel generator crankshaft failure, Eng. Fail. Anal., 16 (2009) 2333–2341. – volume: 4 start-page: 425 year: 2014 end-page: 432 ident: b0220 article-title: Structural Damage Localization by Linear Technique of Acoustic Emission, Open Journal of publication-title: Fluid Dyn. – volume: 29 start-page: 273 year: 1985 end-page: 285 ident: b0100 article-title: A new method for gray-level picture thresholding using the entropy of the histogram publication-title: Comput. Vis., Graph., Image Process. – volume: 1757 year: 2016 ident: 10.1016/j.engfailanal.2022.106981_b0175 article-title: Acoustic emission entropy as a measure of damage in materials publication-title: AIP Conf. Proc. doi: 10.1063/1.4959066 – volume: 127 year: 2021 ident: 10.1016/j.engfailanal.2022.106981_b0205 article-title: Crack initiation detection in crankshaft ductile cast iron based on information entropy of acoustic emission signals under tensile loading publication-title: Eng. Fail. Anal. – volume: 85 start-page: 189 year: 2018 ident: 10.1016/j.engfailanal.2022.106981_b0050 article-title: Evaluation of high-cycle bending fatigue and fracture behaviors in EN-GJS700-2 ductile cast iron of crankshafts publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2017.12.017 – volume: 39 start-page: 1261 year: 2005 ident: 10.1016/j.engfailanal.2022.106981_b0125 article-title: Mechanical characterization of composites with embedded optical fibers publication-title: J. Compos. Mater. doi: 10.1177/0021998305050423 – volume: 77 start-page: 74 year: 2015 ident: 10.1016/j.engfailanal.2022.106981_b0150 article-title: Energy dissipation in the course of the fatigue degradation: Mathematical derivation and experimental quantification publication-title: Int. J. Solids Struct. doi: 10.1016/j.ijsolstr.2015.06.032 – volume: 100 start-page: 617 year: 2018 ident: 10.1016/j.engfailanal.2022.106981_b0200 article-title: A new qualitative acoustic emission parameter based on Shannon’s entropy for damage monitoring publication-title: Mech. Syst. Sig. Process. doi: 10.1016/j.ymssp.2017.08.007 – volume: 56 start-page: 109 year: 2015 ident: 10.1016/j.engfailanal.2022.106981_b0045 article-title: Crankshaft failure analysis of a boxer diesel motor publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2015.03.014 – ident: 10.1016/j.engfailanal.2022.106981_b0075 – volume: 56 start-page: 51 year: 2015 ident: 10.1016/j.engfailanal.2022.106981_b0030 article-title: On the assessment of fatigue life of marine diesel engine crankshafts publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2015.04.014 – volume: 25 start-page: 3168 year: 2011 ident: 10.1016/j.engfailanal.2022.106981_b0020 article-title: A methodology for cracks identification in large crankshafts publication-title: Mech. Syst. Sig. Process. doi: 10.1016/j.ymssp.2011.02.018 – volume: 4 start-page: 425 year: 2014 ident: 10.1016/j.engfailanal.2022.106981_b0220 article-title: Structural Damage Localization by Linear Technique of Acoustic Emission, Open Journal of publication-title: Fluid Dyn. – ident: 10.1016/j.engfailanal.2022.106981_b0035 doi: 10.1016/j.engfailanal.2009.03.019 – ident: 10.1016/j.engfailanal.2022.106981_b0215 – volume: 232 start-page: 1853 year: 2021 ident: 10.1016/j.engfailanal.2022.106981_b0090 article-title: Heat dissipation and acoustic emission features of titanium alloys in cyclic deformation mode publication-title: Acta Mech. doi: 10.1007/s00707-020-02911-4 – volume: 40 start-page: 791 year: 2013 ident: 10.1016/j.engfailanal.2022.106981_b0085 article-title: A real-time approach to acoustic emission clustering publication-title: Mech. Syst. Sig. Process. doi: 10.1016/j.ymssp.2013.03.017 – volume: 2 start-page: 138 year: 2020 ident: 10.1016/j.engfailanal.2022.106981_b0195 article-title: Identification of fatigue damage evaluation using entropy of acoustic emission waveform publication-title: SN Applied Sciences doi: 10.1007/s42452-019-1694-7 – ident: 10.1016/j.engfailanal.2022.106981_b0245 – ident: 10.1016/j.engfailanal.2022.106981_b0055 – volume: 67 start-page: 129 year: 2014 ident: 10.1016/j.engfailanal.2022.106981_b0140 article-title: Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features publication-title: Construct. Build. Mater. doi: 10.1016/j.conbuildmat.2014.05.015 – volume: 82 start-page: 703 year: 2017 ident: 10.1016/j.engfailanal.2022.106981_b0015 article-title: Stress and failure analysis of the crankshaft of diesel engine publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2017.06.001 – ident: 10.1016/j.engfailanal.2022.106981_b0135 doi: 10.1016/j.matdes.2014.10.026 – ident: 10.1016/j.engfailanal.2022.106981_b0060 doi: 10.1007/978-3-540-69972-9 – volume: 22 start-page: 56 year: 1950 ident: 10.1016/j.engfailanal.2022.106981_b0155 article-title: The thermodynamics of plastic deformation and generalized entropy publication-title: Rev. Mod. Phys. doi: 10.1103/RevModPhys.22.56 – volume: 43 start-page: 1038 year: 2020 ident: 10.1016/j.engfailanal.2022.106981_b0170 article-title: Characterization of the damaging micro-mechanisms in a pearlitic ductile cast iron and damage assessment by acoustic emission testing publication-title: Fatigue Fract. Eng. Mater. Struct. doi: 10.1111/ffe.13214 – ident: 10.1016/j.engfailanal.2022.106981_b0235 – volume: 13 start-page: 1260 year: 2006 ident: 10.1016/j.engfailanal.2022.106981_b0040 article-title: Failure analysis of a crankshaft made from ductile cast iron publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2005.11.005 – ident: 10.1016/j.engfailanal.2022.106981_b0210 – volume: 112 start-page: 424 year: 2016 ident: 10.1016/j.engfailanal.2022.106981_b0065 article-title: An overview on fatigue damage assessment of reinforced concrete structures with the aid of acoustic emission technique publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2016.02.206 – volume: 35 start-page: 147 year: 2013 ident: 10.1016/j.engfailanal.2022.106981_b0005 article-title: Crankshaft failure analysis of a motor vehicle publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2013.01.016 – volume: 27 start-page: 379 year: 1948 ident: 10.1016/j.engfailanal.2022.106981_b0095 article-title: A mathematical theory of communication publication-title: Bell Syst. Tech. J. doi: 10.1002/j.1538-7305.1948.tb01338.x – volume: 77 start-page: 112 year: 2010 ident: 10.1016/j.engfailanal.2022.106981_b0115 article-title: Accelerated natural fault diagnosis in slow speed bearings with acoustic emission publication-title: Eng. Fract. Mech. doi: 10.1016/j.engfracmech.2009.09.016 – ident: 10.1016/j.engfailanal.2022.106981_b0185 doi: 10.12783/shm2017/14112 – volume: 30 year: 2021 ident: 10.1016/j.engfailanal.2022.106981_b0225 article-title: Failure criteria for real-time assessment of ductile cast irons subjected to various loading conditions publication-title: Smart Mater. Struct. – volume: 120 start-page: 379 year: 1998 ident: 10.1016/j.engfailanal.2022.106981_b0160 article-title: A thermodynamic framework for damage mechanics of solder joints publication-title: J. Electron. Packag. doi: 10.1115/1.2792650 – volume: 29 start-page: 157 year: 2012 ident: 10.1016/j.engfailanal.2022.106981_b0120 article-title: Maximum relative entropy-based probabilistic inference in fatigue crack damage prognostics publication-title: Probab. Eng. Mech. doi: 10.1016/j.probengmech.2011.11.006 – volume: 82 start-page: 681 year: 2017 ident: 10.1016/j.engfailanal.2022.106981_b0010 article-title: Failure mode analysis of a diesel motor crankshaft publication-title: Eng. Fail. Anal. doi: 10.1016/j.engfailanal.2017.06.010 – volume: 43 start-page: 2676 year: 2012 ident: 10.1016/j.engfailanal.2022.106981_b0130 article-title: Monitoring mechanical damage in structural materials using complementary NDE techniques based on thermography and acoustic emission publication-title: Compos. B Eng. doi: 10.1016/j.compositesb.2011.12.013 – volume: 29 start-page: 273 year: 1985 ident: 10.1016/j.engfailanal.2022.106981_b0100 article-title: A new method for gray-level picture thresholding using the entropy of the histogram publication-title: Comput. Vis., Graph., Image Process. doi: 10.1016/0734-189X(85)90125-2 – volume: 27 start-page: 860 year: 2021 ident: 10.1016/j.engfailanal.2022.106981_b0250 article-title: Influence of Heat Treatment on High-Cycle Fatigue and Fracture Behaviors of Piston Aluminum Alloy Under Fully-Reversed Cyclic Bending publication-title: Met. Mater. Int. doi: 10.1007/s12540-019-00498-7 – volume: 18 start-page: 280 year: 2016 ident: 10.1016/j.engfailanal.2022.106981_b0165 article-title: Acoustic Entropy of the Materials in the Course of Degradation publication-title: Entropy doi: 10.3390/e18080280 – ident: 10.1016/j.engfailanal.2022.106981_b0110 – ident: 10.1016/j.engfailanal.2022.106981_b0240 – ident: 10.1016/j.engfailanal.2022.106981_b0080 – volume: 61 start-page: 375 year: 2014 ident: 10.1016/j.engfailanal.2022.106981_b0145 article-title: Criticality of degradation in composite materials subjected to cyclic loading publication-title: Compos. B Eng. doi: 10.1016/j.compositesb.2013.06.048 – volume: 38 start-page: 713 year: 1992 ident: 10.1016/j.engfailanal.2022.106981_b0105 article-title: Entropy-based algorithms for best basis selection publication-title: IEEE Trans. Inf. Theory doi: 10.1109/18.119732 – ident: 10.1016/j.engfailanal.2022.106981_b0230 doi: 10.1016/S0257-8972(99)00211-X – volume: 158 start-page: 448 year: 2019 ident: 10.1016/j.engfailanal.2022.106981_b0070 article-title: Tensile loading rate effect on mechanical properties and failure mechanisms in open-hole carbon fiber reinforced polymer composites by acoustic emission approach publication-title: Compos. B Eng. doi: 10.1016/j.compositesb.2018.09.103 – volume: 44 start-page: 1041 year: 2021 ident: 10.1016/j.engfailanal.2022.106981_b0190 article-title: Acoustic emission entropy: An innovative approach for structural health monitoring of fracture-critical metallic components subjected to fatigue loading publication-title: Fatigue Fract. Eng. Mater. Struct. doi: 10.1111/ffe.13412 – volume: 7 start-page: 562 year: 2017 ident: 10.1016/j.engfailanal.2022.106981_b0180 article-title: Damage Assessment Using Information Entropy of Individual Acoustic Emission Waveforms during Cyclic Fatigue Loading publication-title: Appl. Sci. doi: 10.3390/app7060562 – volume: 12 start-page: 512 year: 2011 ident: 10.1016/j.engfailanal.2022.106981_b0025 article-title: Influence of Laser Reconditioning on Fatigue Properties of Crankshafts publication-title: Phys. Procedia doi: 10.1016/j.phpro.2011.03.063 |
| SSID | ssj0007291 |
| Score | 2.4261813 |
| Snippet | •The AE entropy method is more practical for real-time structural health monitoring applications.•In the AE entropy method, the maximum entropy was found to be... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 106981 |
| SubjectTerms | Acoustic emission entropy Ductile cast iron Field Emission Scanning Electron Microscopy Real-time health monitoring Rotating bending fatigue test |
| Title | Fatigue crack initiation detection in ductile cast iron crankshaft under rotating bending fatigue test using the acoustic emission entropy method |
| URI | https://dx.doi.org/10.1016/j.engfailanal.2022.106981 |
| Volume | 144 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1LS8NAEF5KBdGD-MT6KCt4rU3SPMFLKZb6KqIWegu7m0mNLWlJ04MX_4P_2Jk8bAVBwUMIDDshzGy-nZnMg7FzHUxPaIAfkikUhW6MhucJBEM7EK5UQSgUVSPf9-3ewLwZWsMK65S1MJRWWWB_jukZWheUZiHN5iyKmk96y6KGUY5BAX60u6mC3XRol1-8L9M80HjMnS4L3SRcvc7OljleEI9CEU0E6gxdRcNAuu25-s9n1Mq5091mW4XByNv5O-2wCsS7bHOljeAe--iieEcL4CoRaswjygfKBM4DSLNUqxiJnDq7IgZwJeYpp-o2Wh-P5y8iTDnVkiU8mdKf-XjEJWTVLjwsnowGKa6huAJHi5EjjGZTwDhNi6N4G6cg8XT2xvOJ1Pts0L167vQaxaiFhmoZetrQdaFZytSlSf3cZWij2whOgBf5j7alwAZXBZqUju05ngahRIrjgkB70FNG64BV42kMh1QEDqDZCqHDFQgQQkhAnyugmev4KMOqMbcUrq-KPuQ0DmPilwlnr_6KXnzSi5_rpcaML9ZZ3ozjL0yXpQb9bzvLx0Pjd_aj_7Efsw0aUJ_neZ-wapos4BTNmFTWs31aZ2vtzuPdA92vb3v9T2vm-OY |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1LS8NAEB60go-D-MS3K3gtTdI8wUspllbbXmyht7C7mdTakpY2HvwZ_mNnklQrCAoechl2ljCz-XZmMg-AWxPtQBpIH5ItNYdurHIQSAJDN5K-0lEsNVcjd7pus28_DJzBGtSXtTCcVllgf47pGVoXlEohzcpsNKo8mVWHG0Z5Fgf4ye5ehw3uTuWUYKPWemx2PwGZ7Mfc73LIUyKGTbj5SvPCZBjL0USS2shbtCyiu4Fv_nxNrVw9jT3YLWxGUctfax_WMDmAnZVOgofw3iAJD19R6LnUYzHilKBM5iLCNMu2SogouLkrwYDQcpEKLnDj9cl48SzjVHA52VzMp_xzPhkKhVnBi4iLnckmpTUcWhBkNApC0mwQmOCBcRxyExwnns7eRD6U-gj6jftevVkupi2UddUy07JpSsPRtqlsbumuYpc8R_QietiFdB2NLvo6MpTy3MALDIwVUTwfJZmEgbaqx1BKpgmecB04ouFqQg9fEkZIqZDcrojHrtNWlnMK_lK4oS5akfNEjEm4zDl7CVf0ErJewlwvp2B9ss7yfhx_YbpbajD8drhCujd-Zz_7H_s1bDV7nXbYbnUfz2Gb59Xnad8XUErnr3hJVk2qropT-wEZUvoC |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Fatigue+crack+initiation+detection+in+ductile+cast+iron+crankshaft+under+rotating+bending+fatigue+test+using+the+acoustic+emission+entropy+method&rft.jtitle=Engineering+failure+analysis&rft.au=Hosseini%2C+Seyed+Morteza&rft.au=Azadi%2C+Mohammad&rft.au=Ghasemi-Ghalebahman%2C+Ahmad&rft.au=Jafari%2C+Seyed+Mohammad&rft.date=2023-02-01&rft.pub=Elsevier+Ltd&rft.issn=1350-6307&rft.eissn=1873-1961&rft.volume=144&rft_id=info:doi/10.1016%2Fj.engfailanal.2022.106981&rft.externalDocID=S1350630722009487 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1350-6307&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1350-6307&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1350-6307&client=summon |