Hybrid low salinity water and surfactant process for enhancing heavy oil recovery

• Published in: Petroleum exploration and development Vol. 50; no. 6; pp. 1466 - 1477
• Main Authors: ROLDÁN-CARRILLO, Teresa, CASTORENA-CORTES, Gladys, SALAZAR CASTILLO, Rodrigo Orlando, HERNÁNDEZ-ESCOBEDO, Luis, OLGUÍN-LORA, Patricia, GACHUZ-MURO, Herón
• Format: Journal Article
• Language: English
• Published: KeAi Communications Co., Ltd 01.12.2023
• Subjects: enhanced oil recovery; hybrid processes; low salinity water flooding; surfactant flooding; tomography
• ISSN: 1876-3804; 1876-3804
• DOI: 10.1016/S1876-3804(24)60480-5

Combining low salinity water (LSW) with surfactants has an enormous potential for enhancing oil recovery processes. However, there is no consensus about the mechanisms involved, in addition to the fact that several studies have been conducted in model systems, while experiments with rocks and reservoir fluids are scarce. This study presents a core-flooding experiment of LSW injection, with and without surfactant, using the core and heavy oil samples obtained from a sandstone reservoir in southeastern Mexico. The effluents and the crude oil obtained at each stage were analyzed. The study was complemented by tomographic analysis. The results revealed that LSW injection and hybrid process with surfactants obtained an increase of 11.4 percentage points in recovery factor. Various phenomena were caused by LSW flooding, such as changes in wettability and pH, ion exchange, mineral dissolution, detachment of fines and modification of the hydrocarbon profile. In the surfactant flooding, the reduction of interfacial tension and alteration of wettability were the main mechanisms involved. The findings of this work also showed that the conditions believed to be necessary for enhanced oil recovery with LSW, such as the presence of kaolinite or high acid number oil, are not relevant.