Novel polymer materials systems to expand the capabilities of FDM™-type additive manufacturing

The work presented here describes the efforts conducted in the past decade by the Polymer Extrusion Lab at The University of Texas at El Paso in the area of novel materials development for fused deposition modeling (FDM™)-type additive manufacturing platforms. We discuss efforts in the development o...

Full description

Saved in:
Bibliographic Details
Published inMRS communications Vol. 11; no. 2; pp. 129 - 145
Main Authors Word, Truman J., Guerrero, Ariana, Roberson, D. A.
Format Journal Article
LanguageEnglish
Published Cham Springer International Publishing 01.04.2021
Subjects
Online AccessGet full text

Cover

Loading…
Abstract The work presented here describes the efforts conducted in the past decade by the Polymer Extrusion Lab at The University of Texas at El Paso in the area of novel materials development for fused deposition modeling (FDM™)-type additive manufacturing platforms. We discuss efforts in the development of application-specific materials systems as well as the development of materials whose physical properties can be enhanced by FDM™-type processing. Additional efforts in the area of hybrid composite materials, sustainable materials, and shape-memory polymers are discussed. Aspects related to materials characterization are also highlighted.
AbstractList The work presented here describes the efforts conducted in the past decade by the Polymer Extrusion Lab at The University of Texas at El Paso in the area of novel materials development for fused deposition modeling (FDM™)-type additive manufacturing platforms. We discuss efforts in the development of application-specific materials systems as well as the development of materials whose physical properties can be enhanced by FDM™-type processing. Additional efforts in the area of hybrid composite materials, sustainable materials, and shape-memory polymers are discussed. Aspects related to materials characterization are also highlighted.
Author Word, Truman J.
Guerrero, Ariana
Roberson, D. A.
Author_xml – sequence: 1
  givenname: Truman J.
  surname: Word
  fullname: Word, Truman J.
  organization: Polymer Extrusion Lab, The University of Texas at El Paso, Department of Metallurgical, Materials and Biomedical Engineering, The University of Texas at El Paso
– sequence: 2
  givenname: Ariana
  surname: Guerrero
  fullname: Guerrero, Ariana
  organization: Polymer Extrusion Lab, The University of Texas at El Paso, Department of Metallurgical, Materials and Biomedical Engineering, The University of Texas at El Paso
– sequence: 3
  givenname: D. A.
  surname: Roberson
  fullname: Roberson, D. A.
  email: droberson@utep.edu
  organization: Polymer Extrusion Lab, The University of Texas at El Paso, Department of Metallurgical, Materials and Biomedical Engineering, The University of Texas at El Paso
BookMark eNp9kEFOwzAURC1UJErpBVj5AgbbqeNkiQoFpAIbWBsn_oZUSRzZbkX2nISjcRIMRSxZ_a_RzGj0jtGkdz0gdMroGRNCnodFJmRJKGeEUsoYEQdoypkoSV7kcvL3i_IIzUPYJBMVOZdSTNHzvdtBiwfXjh143OkIvtFtwGEMEbqAo8PwNuje4PgKuNaDrpq2iQ0E7CxeXd59vn-QOA6AtTFJ30Eq6bdW13Hrm_7lBB3a1Afz3ztDT6urx-UNWT9c3y4v1qTmJYukBFuIyhSLrNTW5BRkyY2l0vIqDeW6Bp5XxpgaWCEFF6CTWhvNFkzkhkI2Q3zfW3sXggerBt902o-KUfWNSe0xqYRJ_WBSIoWyfSgM31vBq43b-j7t_C_1BQ2mb80
CitedBy_id crossref_primary_10_1007_s10924_023_02818_w
crossref_primary_10_3390_ma14154254
crossref_primary_10_3390_polym15102263
crossref_primary_10_1007_s10853_024_09657_7
crossref_primary_10_1002_mame_202200197
crossref_primary_10_3390_ma16175906
crossref_primary_10_1002_adem_202101219
crossref_primary_10_1007_s11668_023_01681_0
crossref_primary_10_1016_j_polymertesting_2022_107859
crossref_primary_10_1007_s11665_022_07222_4
Cites_doi 10.1007/s10924-020-01900-x
10.1016/j.ceramint.2018.02.107
10.1007/s11665-010-9740-z
10.1016/j.matlet.2008.02.008
10.1007/s11668-016-0067-4
10.1007/s11668-019-00614-0
10.1016/j.coco.2019.07.009
10.1023/A:1022874530586
10.1557/jmr.2014.158
10.1007/s11664-015-3687-7
10.3390/polym10060666
10.1017/S026357471000069X
10.1016/j.polymer.2008.11.018
10.1007/978-3-319-57078-5_73
10.1016/j.jmapro.2018.12.004
10.1016/j.addma.2015.02.001
10.1051/matecconf/201815706001
10.1108/01445150510626451
10.1080/00207840410001733940
10.1016/j.addma.2018.11.009
10.1002/jbm.b.32863
10.1016/j.polymer.2014.07.054
10.1080/10426910008912976
10.1016/j.addma.2015.09.004
10.1080/17452759.2018.1550694
10.1016/j.mtcomm.2018.02.034
10.1108/RPJ-12-2014-0165
10.24352/UB.OVGU-2018-010
10.1080/17452759.2016.1175045
10.3390/polym6082287
10.1155/2017/1954903
10.1177/0892705719864150
10.1557/opl.2013.319
10.1016/j.jmatprotec.2006.09.007
10.3390/ma12060887
10.1016/j.addma.2018.03.007
10.1108/13552540310489631
10.1016/j.compscitech.2014.10.009
10.1016/j.matdes.2004.02.009
10.1007/s11668-014-9803-9
10.1108/13552540210441166
10.1021/acs.macromol.8b01908
10.1007/s00170-015-7843-2
10.1520/D0256-10R18
10.1520/D0638-14
ContentType Journal Article
Copyright The Author(s), under exclusive licence to The Materials Research Society 2021
Copyright_xml – notice: The Author(s), under exclusive licence to The Materials Research Society 2021
DBID AAYXX
CITATION
DOI 10.1557/s43579-021-00011-5
DatabaseName CrossRef
DatabaseTitle CrossRef
DatabaseTitleList
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 2159-6867
EndPage 145
ExternalDocumentID 10_1557_s43579_021_00011_5
GroupedDBID -E.
.FH
0E1
0R~
406
5VS
7~V
8AO
8FE
8FG
8UJ
AAAZR
AABES
AABWE
AACJH
AAEED
AAFGU
AAGFV
AAHNG
AAKTX
AARAB
AATNV
AAUKB
AAYFA
ABBXD
ABECU
ABJCF
ABJNI
ABKAS
ABKKG
ABMQK
ABMWE
ABQTM
ABROB
ABTEG
ABTKH
ABTMW
ABZCX
ACBMC
ACCHT
ACGFS
ACHSB
ACIGE
ACIMK
ACQFJ
ACQPF
ACREK
ACTTH
ACUIJ
ACUYZ
ACVWB
ACWGA
ACWMK
ACZBM
ACZUX
ADCGK
ADFEC
ADGEJ
ADOCW
ADOVH
ADOXG
AEBAK
AEFTE
AEHGV
AENEX
AENGE
AESKC
AESTI
AEYYC
AFFUJ
AFKQG
AFKRA
AFLOS
AFLVW
AFNRJ
AFQWF
AFUTZ
AGMZJ
AGOOT
AHQXX
AIGNW
AIHIV
AIOIP
AISIE
AJCYY
AJDOV
AJPFC
AJQAS
ALMA_UNASSIGNED_HOLDINGS
ALVPG
ALWZO
AMXSW
AMYLF
ARABE
ATUCA
AUXHV
BBLKV
BENPR
BGHMG
BGLVJ
BMAJL
C0O
CBIIA
CCPQU
CFAFE
CHEAL
CZ9
D1I
DC4
DOHLZ
DPUIP
EBS
EJD
HCIFZ
HG-
HZ~
I.6
IH6
IKXTQ
IOEEP
IS6
IWAJR
I~P
JHPGK
JQKCU
JZLTJ
KB.
KC.
KCGVB
KFECR
L98
LLZTM
M-V
NIKVX
NPVJJ
NQJWS
O9-
PDBOC
PYCCK
RAMDC
RCA
RR0
RSV
S0W
S6-
S6U
SAAAG
SNE
SNPRN
SOHCF
SOJ
SRMVM
SSLCW
T9M
UT1
WXY
ZMTXR
ZYDXJ
AACDK
AAJBT
AASML
AAYXX
ABAKF
ACAOD
ACDTI
ACZOJ
AEFQL
AEMSY
AFBBN
AGQEE
AIGIU
CITATION
CTKSN
EBLON
FIGPU
ROL
SJYHP
ID FETCH-LOGICAL-c291t-9ef85bd8439afd60e792df07f2b2772ace26bdddce187525ea772cda14156d0e3
ISSN 2159-6859
IngestDate Thu Sep 26 18:12:52 EDT 2024
Sat Dec 16 12:09:33 EST 2023
IsPeerReviewed true
IsScholarly true
Issue 2
Language English
LinkModel OpenURL
MergedId FETCHMERGED-LOGICAL-c291t-9ef85bd8439afd60e792df07f2b2772ace26bdddce187525ea772cda14156d0e3
PageCount 17
ParticipantIDs crossref_primary_10_1557_s43579_021_00011_5
springer_journals_10_1557_s43579_021_00011_5
PublicationCentury 2000
PublicationDate 2021-04-01
PublicationDateYYYYMMDD 2021-04-01
PublicationDate_xml – month: 04
  year: 2021
  text: 2021-04-01
  day: 01
PublicationDecade 2020
PublicationPlace Cham
PublicationPlace_xml – name: Cham
PublicationTitle MRS communications
PublicationTitleAbbrev MRS Communications
PublicationYear 2021
Publisher Springer International Publishing
Publisher_xml – name: Springer International Publishing
References Ho, Pometto, Gadea-Rivas, Briceño, Rojas (CR49) 1999; 7
Haryńska, Kucinska-Lipka, Sulowska, Gubanska, Kostrzewa, Janik (CR31) 2019; 12
Carrete, Bermudez, Aguirre, Alvarez-Primo, Anil-Kumar, Chinolla, Gamboa, Gonzalez, Heredia, Hernandez, Levario, Lindquist, Luna, Martinez, Mendez, Slager, Ugarte-Sanchez, Urquidi, Zamora, Roberson (CR56) 2019
CR34
Yang, Lu, Huang, Qi, Wu, Sun (CR39) 2014; 6
Schimpf, Max, Stolz, Heck, Mülhaupt (CR30) 2019; 52
Beniak, Križan, Matúš, Šajgalík (CR45) 2018; 157
Korpela, Kokkari, Korhonen, Malin, Narhi, Seppalea (CR46) 2013; 101
Es-Said, Foyos, Noorani, Mendelson, Marloth, Pregger (CR17) 2000; 15
Siqueiros, Roberson (CR53) 2017; 2017
Ahn, Montero, Odell, Roundy, Wright (CR19) 2002; 8
Yang, Chen, Wei, Li (CR35) 2016; 84
Zander, Gillan, Lambeth (CR47) 2018; 21
Zander, Gillan, Burckhard, Gardea (CR48) 2019; 25
CR4
TorradoPerez, Roberson, Wicker (CR25) 2014; 14
Torrado, Shemelya, English, Lin, Wicker, Roberson (CR26) 2015; 6
CR3
Kreiger, Pearce (CR1) 2013
Shaffer, Yang, Vargas, Di Prima, Voit (CR23) 2014; 55
Siqueiros, Schnittker, Roberson (CR32) 2016; 11
Jones, Haufe, Sells, Iravani, Olliver, Palmer, Bowyer (CR2) 2011; 29
Shemelya, Rivera, Perez, Rocha, Liang, Yu, Kief, Alexander, Stegeman, Xin, Wicker, MacDonald, Roberson (CR42) 2015; 44
Roberson, Shemelya, MacDonald, Wicker (CR16) 2015; 21
Vega, Clements, Lam, Abad, Fritz, Ula, Es-Said (CR20) 2011; 20
Masood, Song (CR5) 2004; 25
CR43
Khatri, Lappe, Habedank, Mueller, Megnin, Hanemann (CR7) 2018; 10
CR40
Raasch, Ivey, Aldrich, Nobes, Ayranci (CR36) 2015; 8
Reppel, Weinberg (CR33) 2018; 38
Bellini, Güçeri (CR18) 2003; 9
Brostow, Chiu, Kalogeras, Vassilikou-Dova (CR15) 2008; 62
Kim, Johnson, Chavez, Garcia Rosales, Tseng, Lin (CR8) 2018; 44
CR14
CR13
CR12
CR52
CR50
Sezer, Eren (CR11) 2019; 37
Pakkanen, Manfredi, Minetola, L. iuliano (CR44) 2017
Hague, Mansour, Saleh (CR21) 2004; 42
Schmitz, Ecco, Dul, Pereira, Soares, Barra, Pegoretti (CR41) 2018; 15
Rocha, Perez, Roberson, Shemelya, MacDonald, Wicker (CR27) 2014; 29
Torrado, Roberson (CR38) 2016; 16
Carrete, Quiñonez, Bermudez, Roberson (CR51) 2020
Chávez, Quiñonez, Roberson (CR55) 2019
Caulfield, McHugh, Lohfeld (CR22) 2007; 182
CR29
CR28
Chávez, Siqueiros, Carrete, Delgado, Ritter, Roberson (CR37) 2019; 14
CR24
Gupta, Lin, Deans, Crosby, Baer, Hiltner, Schiraldi (CR54) 2009; 50
Tekinalp, Kunc, Velez-Garcia, Duty, Love, Naskar, Blue, Ozcan (CR10) 2014; 105
Tambrallimath, Keshavamurthy, Saravanabavan, Koppad, Kumar (CR9) 2019; 15
Song, Masood (CR6) 2005; 25
11_CR50
FA Chávez (11_CR55) 2019
IA Carrete (11_CR51) 2020
11_CR52
V Schimpf (11_CR30) 2019; 52
11_CR12
FA Chávez (11_CR37) 2019; 14
R Jones (11_CR2) 2011; 29
D Roberson (11_CR16) 2015; 21
OS Es-Said (11_CR17) 2000; 15
S Shaffer (11_CR23) 2014; 55
J Raasch (11_CR36) 2015; 8
WQ Song (11_CR6) 2005; 25
11_CR14
11_CR13
HK Sezer (11_CR11) 2019; 37
B Caulfield (11_CR22) 2007; 182
Anna Bellini (11_CR18) 2003; 9
CR Rocha (11_CR27) 2014; 29
AR Torrado (11_CR38) 2016; 16
V Vega (11_CR20) 2011; 20
R Hague (11_CR21) 2004; 42
JG Siqueiros (11_CR32) 2016; 11
M Kreiger (11_CR1) 2013
JG Siqueiros (11_CR53) 2017; 2017
J Pakkanen (11_CR44) 2017
M Gupta (11_CR54) 2009; 50
HL Tekinalp (11_CR10) 2014; 105
SH Masood (11_CR5) 2004; 25
IA Carrete (11_CR56) 2019
W Brostow (11_CR15) 2008; 62
11_CR24
11_CR29
11_CR28
NE Zander (11_CR48) 2019; 25
B Khatri (11_CR7) 2018; 10
11_CR34
WG Yang (11_CR39) 2014; 6
J Korpela (11_CR46) 2013; 101
H Kim (11_CR8) 2018; 44
J Beniak (11_CR45) 2018; 157
AR TorradoPerez (11_CR25) 2014; 14
A Haryńska (11_CR31) 2019; 12
AR Torrado (11_CR26) 2015; 6
K-LG Ho (11_CR49) 1999; 7
V Tambrallimath (11_CR9) 2019; 15
Y Yang (11_CR35) 2016; 84
11_CR40
11_CR43
Sung-Hoon Ahn (11_CR19) 2002; 8
NE Zander (11_CR47) 2018; 21
CM Shemelya (11_CR42) 2015; 44
DP Schmitz (11_CR41) 2018; 15
11_CR3
11_CR4
T Reppel (11_CR33) 2018; 38
References_xml – year: 2020
  ident: CR51
  article-title: Incorporating textile-derived cellulose fibers for the strengthening of recycled polyethylene terephthalate for 3D printing feedstock materials
  publication-title: J. Polym. Environ.
  doi: 10.1007/s10924-020-01900-x
  contributor:
    fullname: Roberson
– volume: 44
  start-page: 9037
  year: 2018
  end-page: 9044
  ident: CR8
  article-title: Enhanced dielectric properties of three phase dielectric MWCNTs/BaTiO /PVDF nanocomposites for energy storage using fused deposition modeling 3D printing
  publication-title: Ceram. Int.
  doi: 10.1016/j.ceramint.2018.02.107
  contributor:
    fullname: Lin
– volume: 20
  start-page: 978
  year: 2011
  end-page: 988
  ident: CR20
  article-title: The effect of layer orientation on the mechanical properties and microstructure of a polymer
  publication-title: J. Mater. Eng. Perform.
  doi: 10.1007/s11665-010-9740-z
  contributor:
    fullname: Es-Said
– volume: 62
  start-page: 3152
  year: 2008
  end-page: 3155
  ident: CR15
  article-title: Prediction of glass transition temperatures: binary blends and copolymers
  publication-title: Mater. Lett.
  doi: 10.1016/j.matlet.2008.02.008
  contributor:
    fullname: Vassilikou-Dova
– ident: CR4
– volume: 16
  start-page: 154
  year: 2016
  end-page: 164
  ident: CR38
  article-title: Failure analysis and anisotropy evaluation of 3D-printed tensile test specimens of different geometries and print raster patterns
  publication-title: J. Fail. Anal. Prev.
  doi: 10.1007/s11668-016-0067-4
  contributor:
    fullname: Roberson
– ident: CR12
– year: 2019
  ident: CR56
  article-title: Failure analysis of additively manufactured polyester test specimens exposed to various liquid media
  publication-title: J. Fail. Anal. Prev.
  doi: 10.1007/s11668-019-00614-0
  contributor:
    fullname: Roberson
– volume: 15
  start-page: 129
  year: 2019
  end-page: 134
  ident: CR9
  article-title: Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process
  publication-title: Compos. Commun.
  doi: 10.1016/j.coco.2019.07.009
  contributor:
    fullname: Kumar
– volume: 7
  start-page: 173
  year: 1999
  end-page: 177
  ident: CR49
  article-title: Degradation of polylactic acid (PLA) plastic in Costa Rican soil and Iowa State University compost rows
  publication-title: J. Polym. Environ.
  doi: 10.1023/A:1022874530586
  contributor:
    fullname: Rojas
– volume: 29
  start-page: 1859
  year: 2014
  end-page: 1866
  ident: CR27
  article-title: Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
  publication-title: J. Mater. Res.
  doi: 10.1557/jmr.2014.158
  contributor:
    fullname: Wicker
– ident: CR29
– volume: 44
  start-page: 2598
  year: 2015
  end-page: 2607
  ident: CR42
  article-title: Mechanical, electromagnetic, and X-ray shielding characterization of a 3D printable tungsten-polycarbonate polymer matrix composite for space-based applications
  publication-title: J. Electron. Mater.
  doi: 10.1007/s11664-015-3687-7
  contributor:
    fullname: Roberson
– volume: 10
  start-page: 666
  year: 2018
  ident: CR7
  article-title: Fused deposition modeling of ABS-barium titanate composites: a simple route towards tailored dielectric devices
  publication-title: Polymers
  doi: 10.3390/polym10060666
  contributor:
    fullname: Hanemann
– volume: 29
  start-page: 177
  year: 2011
  end-page: 191
  ident: CR2
  article-title: Reprap—the replicating rapid prototyper
  publication-title: Robotica
  doi: 10.1017/S026357471000069X
  contributor:
    fullname: Bowyer
– volume: 50
  start-page: 598
  issue: 2
  year: 2009
  ident: CR54
  article-title: Biaxially oriented poly(propylene-g-maleic anhydride)/phosphate glass composite films for high gas barrier applications
  publication-title: Polymer
  doi: 10.1016/j.polymer.2008.11.018
  contributor:
    fullname: Schiraldi
– year: 2017
  ident: CR44
  article-title: About the use of recycled or biodegradable filaments for sustainability of 3D printing: State of the art and research opportunities
  publication-title: Smart Innov. Syst. Technol.
  doi: 10.1007/978-3-319-57078-5_73
  contributor:
    fullname: L. iuliano
– volume: 37
  start-page: 339
  year: 2019
  end-page: 347
  ident: CR11
  article-title: FDM 3D printing of MWCNT re-inforced ABS nano-composite parts with enhanced mechanical and electrical properties
  publication-title: J. Manuf. Process.
  doi: 10.1016/j.jmapro.2018.12.004
  contributor:
    fullname: Eren
– volume: 6
  start-page: 16
  year: 2015
  end-page: 29
  ident: CR26
  article-title: Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2015.02.001
  contributor:
    fullname: Roberson
– volume: 157
  start-page: 06001
  year: 2018
  ident: CR45
  article-title: Experimental testing of PLA biodegradable thermoplastic in the frame of 3D printing FDM technology
  publication-title: MATEC Web Conf.
  doi: 10.1051/matecconf/201815706001
  contributor:
    fullname: Šajgalík
– volume: 25
  start-page: 309
  year: 2005
  end-page: 315
  ident: CR6
  article-title: Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process
  publication-title: Assembly Autom.
  doi: 10.1108/01445150510626451
  contributor:
    fullname: Masood
– volume: 42
  start-page: 4691
  year: 2004
  end-page: 4708
  ident: CR21
  article-title: Material and design considerations for rapid manufacturing
  publication-title: Int. J. Prod Res.
  doi: 10.1080/00207840410001733940
  contributor:
    fullname: Saleh
– volume: 25
  start-page: 122
  year: 2019
  end-page: 130
  ident: CR48
  article-title: Recycled polypropylene blends as novel 3D printing materials
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2018.11.009
  contributor:
    fullname: Gardea
– ident: CR50
– volume: 101
  start-page: 610
  year: 2013
  end-page: 619
  ident: CR46
  article-title: Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
  publication-title: J. Biomed. Mater. Res. Part B Appl. Biomater.
  doi: 10.1002/jbm.b.32863
  contributor:
    fullname: Seppalea
– volume: 55
  start-page: 5969
  year: 2014
  end-page: 5979
  ident: CR23
  article-title: On reducing anisotropy in 3D printed polymers via ionizing radiation
  publication-title: Polymer
  doi: 10.1016/j.polymer.2014.07.054
  contributor:
    fullname: Voit
– volume: 15
  start-page: 107
  year: 2000
  end-page: 122
  ident: CR17
  article-title: Effect of layer orientation on mechanical properties of rapid prototyped samples
  publication-title: Mater. Manuf. Process.
  doi: 10.1080/10426910008912976
  contributor:
    fullname: Pregger
– volume: 8
  start-page: 132
  year: 2015
  end-page: 141
  ident: CR36
  article-title: Characterization of polyurethane shape memory polymer processed by material extrusion additive manufacturing
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2015.09.004
  contributor:
    fullname: Ayranci
– volume: 14
  start-page: 188
  year: 2019
  end-page: 202
  ident: CR37
  article-title: Characterisation of phases and deformation temperature for additively manufactured shape memory polymer components fabricated from rubberised acrylonitrile butadiene styrene
  publication-title: Virtual Phys. Prototyping
  doi: 10.1080/17452759.2018.1550694
  contributor:
    fullname: Roberson
– volume: 15
  start-page: 70
  year: 2018
  end-page: 80
  ident: CR41
  article-title: Electromagnetic interference shielding effectiveness of ABS carbon-based composites manufactured via fused deposition modelling
  publication-title: Mater. Today Commun.
  doi: 10.1016/j.mtcomm.2018.02.034
  contributor:
    fullname: Pegoretti
– volume: 21
  start-page: 137
  year: 2015
  end-page: 143
  ident: CR16
  article-title: Expanding the applicability of FDM-type technologies through materials development
  publication-title: Rapid Prototyping J.
  doi: 10.1108/RPJ-12-2014-0165
  contributor:
    fullname: Wicker
– volume: 38
  start-page: 104
  year: 2018
  end-page: 112
  ident: CR33
  article-title: Experimental determination of elastic and rupture properties of printed Ninjaflex
  publication-title: Technische Mechanik
  doi: 10.24352/UB.OVGU-2018-010
  contributor:
    fullname: Weinberg
– ident: CR43
– volume: 11
  start-page: 123
  year: 2016
  end-page: 131
  ident: CR32
  article-title: ABS-maleated SEBS blend as a 3D printable material
  publication-title: Virtual Phys. Prototyping
  doi: 10.1080/17452759.2016.1175045
  contributor:
    fullname: Roberson
– ident: CR14
– volume: 6
  start-page: 2287
  year: 2014
  end-page: 2308
  ident: CR39
  article-title: Advanced shape memory technology to reshape product design, manufacturing and recycling
  publication-title: Polymers
  doi: 10.3390/polym6082287
  contributor:
    fullname: Sun
– volume: 2017
  start-page: 1954903
  year: 2017
  ident: CR53
  article-title: In situ wire drawing of phosphate glass in polymer matrices for material extrusion 3D printing
  publication-title: Int. J. Polym. Sci.
  doi: 10.1155/2017/1954903
  contributor:
    fullname: Roberson
– year: 2019
  ident: CR55
  article-title: Hybrid metal/thermoplastic composites for FDM-type additive manufacturing
  publication-title: J. Thermoplast. Compos. Mater.
  doi: 10.1177/0892705719864150
  contributor:
    fullname: Roberson
– year: 2013
  ident: CR1
  article-title: Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
  publication-title: Mater. Res. Soc. Symp. Proc.
  doi: 10.1557/opl.2013.319
  contributor:
    fullname: Pearce
– ident: CR40
– volume: 182
  start-page: 477
  year: 2007
  end-page: 488
  ident: CR22
  article-title: Dependence of mechanical properties of polyamide components on build parameters in the SLS process
  publication-title: J. Mater. Process. Technol
  doi: 10.1016/j.jmatprotec.2006.09.007
  contributor:
    fullname: Lohfeld
– volume: 12
  start-page: 887
  issue: 6
  year: 2019
  ident: CR31
  article-title: Medical-grade PCL based polyurethane system for FDM 3D printing—characterization and fabrication
  publication-title: Materials
  doi: 10.3390/ma12060887
  contributor:
    fullname: Janik
– volume: 21
  start-page: 174
  year: 2018
  end-page: 182
  ident: CR47
  article-title: Recycled polyethylene terephthalate as a new FFF feedstock material
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2018.03.007
  contributor:
    fullname: Lambeth
– ident: CR3
– ident: CR52
– ident: CR13
– volume: 9
  start-page: 252
  year: 2003
  end-page: 264
  ident: CR18
  article-title: Mechanical characterization of parts fabricated using fused deposition modeling
  publication-title: Rapid Prototyping J.
  doi: 10.1108/13552540310489631
  contributor:
    fullname: Güçeri
– volume: 105
  start-page: 144
  year: 2014
  end-page: 150
  ident: CR10
  article-title: Highly oriented carbon fiber-polymer composites via additive manufacturing
  publication-title: Compos. Sci. Technol.
  doi: 10.1016/j.compscitech.2014.10.009
  contributor:
    fullname: Ozcan
– ident: CR34
– volume: 25
  start-page: 587
  year: 2004
  end-page: 594
  ident: CR5
  article-title: Development of new metal/polymer materials for rapid tooling using fused deposition modelling
  publication-title: Mater. Des.
  doi: 10.1016/j.matdes.2004.02.009
  contributor:
    fullname: Song
– volume: 14
  start-page: 343
  year: 2014
  end-page: 353
  ident: CR25
  article-title: Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials
  publication-title: J. Fail. Anal. Prev.
  doi: 10.1007/s11668-014-9803-9
  contributor:
    fullname: Wicker
– ident: CR28
– ident: CR24
– volume: 8
  start-page: 248
  year: 2002
  end-page: 257
  ident: CR19
  article-title: Anisotropic material properties of fused deposition modeling ABS
  publication-title: Rapid Prototyping J.
  doi: 10.1108/13552540210441166
  contributor:
    fullname: Wright
– volume: 52
  start-page: 320
  year: 2019
  end-page: 331
  ident: CR30
  article-title: Semicrystalline non-isocyanate polyhydroxyurethanes as thermoplastics and thermoplastic elastomers and their use in 3D printing by fused filament fabrication
  publication-title: Macromolecules
  doi: 10.1021/acs.macromol.8b01908
  contributor:
    fullname: Mülhaupt
– volume: 84
  start-page: 2079
  year: 2016
  end-page: 2095
  ident: CR35
  article-title: 3D printing of shape memory polymer for functional part fabrication
  publication-title: Int. J. Adv. Manuf. Technol.
  doi: 10.1007/s00170-015-7843-2
  contributor:
    fullname: Li
– ident: 11_CR13
  doi: 10.1520/D0256-10R18
– ident: 11_CR50
– volume: 44
  start-page: 2598
  year: 2015
  ident: 11_CR42
  publication-title: J. Electron. Mater.
  doi: 10.1007/s11664-015-3687-7
  contributor:
    fullname: CM Shemelya
– ident: 11_CR29
– volume: 14
  start-page: 188
  year: 2019
  ident: 11_CR37
  publication-title: Virtual Phys. Prototyping
  doi: 10.1080/17452759.2018.1550694
  contributor:
    fullname: FA Chávez
– year: 2020
  ident: 11_CR51
  publication-title: J. Polym. Environ.
  doi: 10.1007/s10924-020-01900-x
  contributor:
    fullname: IA Carrete
– year: 2017
  ident: 11_CR44
  publication-title: Smart Innov. Syst. Technol.
  doi: 10.1007/978-3-319-57078-5_73
  contributor:
    fullname: J Pakkanen
– volume: 7
  start-page: 173
  year: 1999
  ident: 11_CR49
  publication-title: J. Polym. Environ.
  doi: 10.1023/A:1022874530586
  contributor:
    fullname: K-LG Ho
– ident: 11_CR12
  doi: 10.1520/D0638-14
– volume: 9
  start-page: 252
  year: 2003
  ident: 11_CR18
  publication-title: Rapid Prototyping J.
  doi: 10.1108/13552540310489631
  contributor:
    fullname: Anna Bellini
– volume: 55
  start-page: 5969
  year: 2014
  ident: 11_CR23
  publication-title: Polymer
  doi: 10.1016/j.polymer.2014.07.054
  contributor:
    fullname: S Shaffer
– volume: 101
  start-page: 610
  year: 2013
  ident: 11_CR46
  publication-title: J. Biomed. Mater. Res. Part B Appl. Biomater.
  doi: 10.1002/jbm.b.32863
  contributor:
    fullname: J Korpela
– volume: 42
  start-page: 4691
  year: 2004
  ident: 11_CR21
  publication-title: Int. J. Prod Res.
  doi: 10.1080/00207840410001733940
  contributor:
    fullname: R Hague
– volume: 20
  start-page: 978
  year: 2011
  ident: 11_CR20
  publication-title: J. Mater. Eng. Perform.
  doi: 10.1007/s11665-010-9740-z
  contributor:
    fullname: V Vega
– ident: 11_CR43
– ident: 11_CR4
– volume: 8
  start-page: 248
  year: 2002
  ident: 11_CR19
  publication-title: Rapid Prototyping J.
  doi: 10.1108/13552540210441166
  contributor:
    fullname: Sung-Hoon Ahn
– volume: 2017
  start-page: 1954903
  year: 2017
  ident: 11_CR53
  publication-title: Int. J. Polym. Sci.
  doi: 10.1155/2017/1954903
  contributor:
    fullname: JG Siqueiros
– volume: 44
  start-page: 9037
  year: 2018
  ident: 11_CR8
  publication-title: Ceram. Int.
  doi: 10.1016/j.ceramint.2018.02.107
  contributor:
    fullname: H Kim
– volume: 14
  start-page: 343
  year: 2014
  ident: 11_CR25
  publication-title: J. Fail. Anal. Prev.
  doi: 10.1007/s11668-014-9803-9
  contributor:
    fullname: AR TorradoPerez
– volume: 15
  start-page: 107
  year: 2000
  ident: 11_CR17
  publication-title: Mater. Manuf. Process.
  doi: 10.1080/10426910008912976
  contributor:
    fullname: OS Es-Said
– year: 2019
  ident: 11_CR56
  publication-title: J. Fail. Anal. Prev.
  doi: 10.1007/s11668-019-00614-0
  contributor:
    fullname: IA Carrete
– volume: 15
  start-page: 70
  year: 2018
  ident: 11_CR41
  publication-title: Mater. Today Commun.
  doi: 10.1016/j.mtcomm.2018.02.034
  contributor:
    fullname: DP Schmitz
– volume: 12
  start-page: 887
  issue: 6
  year: 2019
  ident: 11_CR31
  publication-title: Materials
  doi: 10.3390/ma12060887
  contributor:
    fullname: A Haryńska
– volume: 8
  start-page: 132
  year: 2015
  ident: 11_CR36
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2015.09.004
  contributor:
    fullname: J Raasch
– volume: 38
  start-page: 104
  year: 2018
  ident: 11_CR33
  publication-title: Technische Mechanik
  doi: 10.24352/UB.OVGU-2018-010
  contributor:
    fullname: T Reppel
– ident: 11_CR3
– volume: 25
  start-page: 122
  year: 2019
  ident: 11_CR48
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2018.11.009
  contributor:
    fullname: NE Zander
– ident: 11_CR52
– volume: 25
  start-page: 309
  year: 2005
  ident: 11_CR6
  publication-title: Assembly Autom.
  doi: 10.1108/01445150510626451
  contributor:
    fullname: WQ Song
– volume: 21
  start-page: 137
  year: 2015
  ident: 11_CR16
  publication-title: Rapid Prototyping J.
  doi: 10.1108/RPJ-12-2014-0165
  contributor:
    fullname: D Roberson
– volume: 37
  start-page: 339
  year: 2019
  ident: 11_CR11
  publication-title: J. Manuf. Process.
  doi: 10.1016/j.jmapro.2018.12.004
  contributor:
    fullname: HK Sezer
– year: 2019
  ident: 11_CR55
  publication-title: J. Thermoplast. Compos. Mater.
  doi: 10.1177/0892705719864150
  contributor:
    fullname: FA Chávez
– ident: 11_CR14
– volume: 84
  start-page: 2079
  year: 2016
  ident: 11_CR35
  publication-title: Int. J. Adv. Manuf. Technol.
  doi: 10.1007/s00170-015-7843-2
  contributor:
    fullname: Y Yang
– volume: 182
  start-page: 477
  year: 2007
  ident: 11_CR22
  publication-title: J. Mater. Process. Technol
  doi: 10.1016/j.jmatprotec.2006.09.007
  contributor:
    fullname: B Caulfield
– volume: 15
  start-page: 129
  year: 2019
  ident: 11_CR9
  publication-title: Compos. Commun.
  doi: 10.1016/j.coco.2019.07.009
  contributor:
    fullname: V Tambrallimath
– volume: 62
  start-page: 3152
  year: 2008
  ident: 11_CR15
  publication-title: Mater. Lett.
  doi: 10.1016/j.matlet.2008.02.008
  contributor:
    fullname: W Brostow
– volume: 10
  start-page: 666
  year: 2018
  ident: 11_CR7
  publication-title: Polymers
  doi: 10.3390/polym10060666
  contributor:
    fullname: B Khatri
– volume: 50
  start-page: 598
  issue: 2
  year: 2009
  ident: 11_CR54
  publication-title: Polymer
  doi: 10.1016/j.polymer.2008.11.018
  contributor:
    fullname: M Gupta
– ident: 11_CR24
– volume: 11
  start-page: 123
  year: 2016
  ident: 11_CR32
  publication-title: Virtual Phys. Prototyping
  doi: 10.1080/17452759.2016.1175045
  contributor:
    fullname: JG Siqueiros
– volume: 21
  start-page: 174
  year: 2018
  ident: 11_CR47
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2018.03.007
  contributor:
    fullname: NE Zander
– ident: 11_CR28
– volume: 6
  start-page: 16
  year: 2015
  ident: 11_CR26
  publication-title: Addit. Manuf.
  doi: 10.1016/j.addma.2015.02.001
  contributor:
    fullname: AR Torrado
– volume: 157
  start-page: 06001
  year: 2018
  ident: 11_CR45
  publication-title: MATEC Web Conf.
  doi: 10.1051/matecconf/201815706001
  contributor:
    fullname: J Beniak
– volume: 29
  start-page: 1859
  year: 2014
  ident: 11_CR27
  publication-title: J. Mater. Res.
  doi: 10.1557/jmr.2014.158
  contributor:
    fullname: CR Rocha
– volume: 52
  start-page: 320
  year: 2019
  ident: 11_CR30
  publication-title: Macromolecules
  doi: 10.1021/acs.macromol.8b01908
  contributor:
    fullname: V Schimpf
– volume: 16
  start-page: 154
  year: 2016
  ident: 11_CR38
  publication-title: J. Fail. Anal. Prev.
  doi: 10.1007/s11668-016-0067-4
  contributor:
    fullname: AR Torrado
– volume: 25
  start-page: 587
  year: 2004
  ident: 11_CR5
  publication-title: Mater. Des.
  doi: 10.1016/j.matdes.2004.02.009
  contributor:
    fullname: SH Masood
– ident: 11_CR34
– ident: 11_CR40
– volume: 29
  start-page: 177
  year: 2011
  ident: 11_CR2
  publication-title: Robotica
  doi: 10.1017/S026357471000069X
  contributor:
    fullname: R Jones
– volume: 6
  start-page: 2287
  year: 2014
  ident: 11_CR39
  publication-title: Polymers
  doi: 10.3390/polym6082287
  contributor:
    fullname: WG Yang
– year: 2013
  ident: 11_CR1
  publication-title: Mater. Res. Soc. Symp. Proc.
  doi: 10.1557/opl.2013.319
  contributor:
    fullname: M Kreiger
– volume: 105
  start-page: 144
  year: 2014
  ident: 11_CR10
  publication-title: Compos. Sci. Technol.
  doi: 10.1016/j.compscitech.2014.10.009
  contributor:
    fullname: HL Tekinalp
SSID ssj0000562775
Score 2.309857
Snippet The work presented here describes the efforts conducted in the past decade by the Polymer Extrusion Lab at The University of Texas at El Paso in the area of...
SourceID crossref
springer
SourceType Aggregation Database
Publisher
StartPage 129
SubjectTerms Biomaterials
Characterization and Evaluation of Materials
Chemistry and Materials Science
Materials Engineering
Materials Science
Nanotechnology
Polymer Sciences
Polymers for Additive Manufacturing Prospective
Title Novel polymer materials systems to expand the capabilities of FDM™-type additive manufacturing
URI https://link.springer.com/article/10.1557/s43579-021-00011-5
Volume 11
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV3NbhMxELZCucABlT9RKMgHOAWH2LvezR4jSqgqpQdIRW-LvfZKleim2m4Q7ZlH4Al4NJ6E8U-8DgVEuawia7Q_ni-e8fibGYSei1xRAaaImJY0JJWJJoUUOUmZSgRPMsFthtz8MNs_Sg-O-fFg8C1iLa06Oaouf5tX8j9ahTHQq8mSvYZmw01hAH6DfuEKGobrP-n4cPlZfzJ9Fi5OdTsE39M91JdntrUb9JezNUeyArtoqbAnrtDsbG9uqQ7piykjNhRryEWWSnQqmpVJebA5jLH_On_33rDQ-5yS4JJ_8CT5RWuPBQ5Ggdmz0m2rfToNvF8TDIFldfuMr73RcDqKQxCMRsyVOAT5SxCzj6P1axo4GAXJJr4IuI7HXFeOsCjTCHwsWmGpD5A4Y01dLcordoDb5sXn4AvmBbFvbLl7vLd6gYtodkEgXjrhEoTtgTwt-Q10k5n6-6b-wOxtiNwZlzG3FZzD1_hsLLjNq6vP3PR4No_brRez2EZ3_PYDTx2W7qKBbu6h21FRyvvoo0UV9qjCAVXYowp3S-xQhQFVOEYVXtYYUPXj63eLJ7zGE97A0wN0NHuzeL1PfB8OUrGCdqTQ9YRLNQHfVdQqG-u8YKoe5zWTMBFMVJplUilVaQq7X8a1gNFKCWqCA2qsk4doq1k2-hHCMMSk0nki1DiVtJA0z4Ti1QQUmWQ62UHD9VyVZ67cSvlnBe2gl-vpLP3f8vwv4o-vJ_4E3erBvou2unaln4IH2slnFhA_AclOg40
link.rule.ids 315,786,790,27946,27947
linkProvider ProQuest
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Novel+polymer+materials+systems+to+expand+the+capabilities+of+FDM%E2%84%A2-type+additive+manufacturing&rft.jtitle=MRS+communications&rft.au=Word%2C+Truman+J.&rft.au=Guerrero%2C+Ariana&rft.au=Roberson%2C+D.+A.&rft.date=2021-04-01&rft.pub=Springer+International+Publishing&rft.issn=2159-6859&rft.eissn=2159-6867&rft.volume=11&rft.issue=2&rft.spage=129&rft.epage=145&rft_id=info:doi/10.1557%2Fs43579-021-00011-5&rft.externalDocID=10_1557_s43579_021_00011_5
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=2159-6859&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=2159-6859&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=2159-6859&client=summon