Physical Similarity Simulation of Deformation and Failure Characteristics of Coal-Rock Rise under the Influence of Repeated Mining in Close Distance Coal Seams

• Published in: Energies (Basel) Vol. 15; no. 10; p. 3503
• Main Authors: Liu, Pengze, Gao, Lin, Zhang, Pandong, Wu, Guiyi, Wang, Yongyin, Liu, Ping, Kang, Xiangtao, Ma, Zhenqian, Kong, Dezhong, Han, Sen
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.05.2022
• Subjects: Asymmetry; Coal; Coal mining; coal-rock roadway; Deformation; Excavation; Experiments; infrared thermal image; Labeling; Laboratories; Mining; Mining engineering; precise excavation of roadway; repeated mining; Research methodology; Roads & highways; Rocks; similar simulation test; Similarity; Simulation; Stress; Stress concentration; Test methods; Test systems; China; Guizhou China
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en15103503

Aiming at the problem that it is difficult to achieve accurate laying of model and precise excavation of roadways in special surrounding rock structure roadway according to conventional physical similarity simulation, which reduces the reliability of experimental results. An accurate laying of model and precise excavation of roadway method, named “labeling positioning and drawing line, presetting roadway model” (LPDLPRM), was proposed. The physical similarity simulation of deformation and failure characteristics of surrounding rock of coal-rock rise, under the influence of repeated mining in close distance coal seams, was carried out based on the method and infrared detection. The results show that the coal-rock rise in close distance coal seams was affected by repeated mining disturbances, and the surrounding rock of coal-rock rise was characterized by obvious asymmetric deformation, specific for the stress and strain near the coal pillar were higher than that of other parts, and cracks near the coal pillar were denser than other parts; when the coal seam is mined in which the coal-rock rise is located, the stress concentration of the surrounding rock near the rise was weakened by mining pressure relief in the upper coal seam; the stress concentration of the surrounding rock near the rise increases when the coal and the lower coal seam are mined, and the stress on the right side (coal pillar side) near the coal-rock rise was the most concentrated. Therefore, it is important to take measures to strengthen support near the coal pillar and to control asymmetric deformation when the coal-rock rise is influenced by repeated mining.