Influence of machining parameters on fretting fatigue life of Inconel 718

[Display omitted] •Tool wear is the most relevant machining parameter affecting fretting fatigue.•Residual stresses proved to be a relevant indicator of fretting fatigue strength.•Surface roughness did not significantly affect the fretting fatigue response. This work focuses on the analysis of the i...

Full description

Saved in:
Bibliographic Details
Published inInternational journal of fatigue Vol. 162; p. 106963
Main Authors Infante-García, D., Díaz-Álvarez, A., Belda, R., Díaz-Álvarez, J., Cantero, J.L., Giner, E., Miguélez, M.H.
Format Journal Article
LanguageEnglish
Published Kidlington Elsevier Ltd 01.09.2022
Elsevier BV
Subjects
Fatigue failure
Fatigue life
Fatigue tests
Fretting
Fretting fatigue
Inconel 718
Machining
Materials fatigue
Nickel base alloys
Process parameters
Residual stress
Superalloys
Surface roughness
Tool wear
Inconel 718
Fretting fatigue
Machining
Online AccessGet full text

Cover

Abstract [Display omitted] •Tool wear is the most relevant machining parameter affecting fretting fatigue.•Residual stresses proved to be a relevant indicator of fretting fatigue strength.•Surface roughness did not significantly affect the fretting fatigue response. This work focuses on the analysis of the influence of different machining factors on the fretting fatigue behaviour of Inconel 718. Fretting fatigue tests using a flat-to-flat with rounded edges contact were carried out using specimens with different manufacturing process parameters. The results pointed out the high impact that machining parameters possess in the Inconel 718 fatigue lifetime. Tool wear has shown to be the most significant parameter. Residual stresses measured along the direction of fatigue load have proved to be a relevant indicator of the fretting fatigue behaviour. Lastly, surface roughness has been shown to possess a weaker influence.
AbstractList This work focuses on the analysis of the influence of different machining factors on the fretting fatigue behaviour of Inconel 718. Fretting fatigue tests using a flat-to-flat with rounded edges contact were carried out using specimens with different manufacturing process parameters. The results pointed out the high impact that machining parameters possess in the Inconel 718 fatigue lifetime. Tool wear has shown to be the most significant parameter. Residual stresses measured along the direction of fatigue load have proved to be a relevant indicator of the fretting fatigue behaviour. Lastly, surface roughness has been shown to possess a weaker influence.
[Display omitted] •Tool wear is the most relevant machining parameter affecting fretting fatigue.•Residual stresses proved to be a relevant indicator of fretting fatigue strength.•Surface roughness did not significantly affect the fretting fatigue response. This work focuses on the analysis of the influence of different machining factors on the fretting fatigue behaviour of Inconel 718. Fretting fatigue tests using a flat-to-flat with rounded edges contact were carried out using specimens with different manufacturing process parameters. The results pointed out the high impact that machining parameters possess in the Inconel 718 fatigue lifetime. Tool wear has shown to be the most significant parameter. Residual stresses measured along the direction of fatigue load have proved to be a relevant indicator of the fretting fatigue behaviour. Lastly, surface roughness has been shown to possess a weaker influence.
ArticleNumber 106963
Author Cantero, J.L.
Díaz-Álvarez, A.
Miguélez, M.H.
Infante-García, D.
Belda, R.
Díaz-Álvarez, J.
Giner, E.
Author_xml – sequence: 1
  givenname: D.
  surname: Infante-García
  fullname: Infante-García, D.
  email: dinfante@ing.uc3m.es
  organization: Institute of Mechanical Engineering and Biomechanics – I2MB, Dept. of Mechanical Engineering and Materials, Universitat Politècnica de València, Camino de Vera, 46022 Valencia, Spain
– sequence: 2
  givenname: A.
  surname: Díaz-Álvarez
  fullname: Díaz-Álvarez, A.
  organization: Dept. of Mechanical Engineering, University Carlos III of Madrid, Avda. de la Universidad 30, 28911 Leganes, Madrid, Spain
– sequence: 3
  givenname: R.
  surname: Belda
  fullname: Belda, R.
  organization: Institute of Mechanical Engineering and Biomechanics – I2MB, Dept. of Mechanical Engineering and Materials, Universitat Politècnica de València, Camino de Vera, 46022 Valencia, Spain
– sequence: 4
  givenname: J.
  surname: Díaz-Álvarez
  fullname: Díaz-Álvarez, J.
  organization: Dept. of Mechanical Engineering, University Carlos III of Madrid, Avda. de la Universidad 30, 28911 Leganes, Madrid, Spain
– sequence: 5
  givenname: J.L.
  surname: Cantero
  fullname: Cantero, J.L.
  organization: Dept. of Mechanical Engineering, University Carlos III of Madrid, Avda. de la Universidad 30, 28911 Leganes, Madrid, Spain
– sequence: 6
  givenname: E.
  surname: Giner
  fullname: Giner, E.
  organization: Institute of Mechanical Engineering and Biomechanics – I2MB, Dept. of Mechanical Engineering and Materials, Universitat Politècnica de València, Camino de Vera, 46022 Valencia, Spain
– sequence: 7
  givenname: M.H.
  surname: Miguélez
  fullname: Miguélez, M.H.
  organization: Dept. of Mechanical Engineering, University Carlos III of Madrid, Avda. de la Universidad 30, 28911 Leganes, Madrid, Spain
BookMark eNqFkF9LwzAUxYNMcJt-Bgs-d-ZP07SPY6grDHzR55AmNzOlS2fSCn57Wzt89enC4Z5z7v2t0MJ3HhC6J3hDMMkfm41rrOrdcYANxZSOal7m7AotSSHKlGWcLtASk4ymhFB2g1YxNhjjEgu-RFXlbTuA15B0Njkp_eG888fkrII6QQ8hJp1PbIC-n-RLUdI6-2uovB6vaRNBilt0bVUb4e4y1-j9-eltt08Pry_VbntINRWsTynBPGfGcE51WecmywCEIlyBLUpGOdNKEMWEqJnBJuO14tpoITJtCyjqmq3Rw5x7Dt3nALGXTTcEP1ZKmhc5JZxkfNwS85YOXYwBrDwHd1LhWxIsJ26ykX_c5MRNztxG53Z2wvjEl4Mgo3YTIOMC6F6azv2b8QNzhnvu
CitedBy_id crossref_primary_10_1109_ACCESS_2024_3373896
crossref_primary_10_1111_ffe_14251
Cites_doi 10.1016/0043-1648(79)90017-6
10.1179/imr.1992.37.1.77
10.1016/j.ijfatigue.2008.10.004
10.1016/j.jmatprotec.2004.02.001
10.3390/met8080582
10.1111/j.1460-2695.1997.tb00402.x
10.1016/j.ijmachtools.2004.02.016
10.1016/j.procir.2016.02.359
10.1016/S0043-1648(02)00148-5
10.1007/s12206-015-1124-8
10.1016/j.procir.2012.07.064
10.1016/j.ijmachtools.2007.08.004
10.1046/j.1460-2695.2000.00263.x
10.1088/0022-3727/25/1A/036
10.1016/j.simpat.2010.11.011
10.1016/S0020-7683(00)00136-0
10.1016/j.ijmachtools.2010.11.003
10.1016/j.ijfatigue.2018.01.005
10.2320/matertrans.45.1586
10.1007/s12206-016-1013-9
10.1016/j.jmatprotec.2005.12.007
10.1016/S0007-8506(07)62893-5
10.1016/S0142-1123(01)00191-8
10.1016/S0142-1123(02)00050-6
10.1016/0890-6955(89)90008-4
10.1016/j.jmatprotec.2005.02.262
10.1016/j.ijfatigue.2021.106589
10.1016/j.ijfatigue.2020.106059
10.1016/j.ijfatigue.2010.12.012
10.1007/s00170-020-05665-4
10.1016/j.ijfatigue.2016.07.011
10.1016/j.procir.2014.04.026
10.1016/j.jmatprotec.2021.117260
10.1016/j.ijfatigue.2011.12.014
10.1016/0301-679X(81)90041-4
10.1016/j.wear.2012.11.004
10.3390/met9050586
10.1016/j.triboint.2009.04.013
10.1016/S0142-1123(97)00039-X
10.3390/met8030192
10.1016/j.ijfatigue.2010.01.012
10.1016/S1369-7021(02)01138-0
10.1016/j.ijfatigue.2004.09.001
10.1016/j.ijfatigue.2015.12.013
10.1016/j.ijfatigue.2018.04.011
10.1520/JAI101587
10.1007/978-94-009-7907-9_31
10.1016/0043-1648(96)06937-2
ContentType Journal Article
Copyright 2022 Elsevier Ltd
Copyright Elsevier BV Sep 2022
Copyright_xml – notice: 2022 Elsevier Ltd
– notice: Copyright Elsevier BV Sep 2022
DBID AAYXX
CITATION
7SR
8BQ
8FD
JG9
DOI 10.1016/j.ijfatigue.2022.106963
DatabaseName CrossRef
Engineered Materials Abstracts
METADEX
Technology Research Database
Materials Research Database
DatabaseTitle CrossRef
Materials Research Database
Engineered Materials Abstracts
Technology Research Database
METADEX
DatabaseTitleList Materials Research Database
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 1879-3452
ExternalDocumentID 10_1016_j_ijfatigue_2022_106963
S0142112322002328
GroupedDBID --K
--M
-~X
.~1
0R~
1B1
1~.
1~5
29J
4.4
457
4G.
5GY
5VS
6OB
7-5
71M
8P~
9JN
AABCJ
AABNK
AACTN
AAEDT
AAEDW
AAIAV
AAIKJ
AAKOC
AALRI
AAOAW
AAQFI
AAQXK
AAXUO
ABDEX
ABEFU
ABFNM
ABJNI
ABMAC
ABXDB
ABYKQ
ACDAQ
ACGFS
ACIWK
ACNNM
ACRLP
ADBBV
ADEZE
ADMUD
ADTZH
AEBSH
AECPX
AEKER
AENEX
AFKWA
AFTJW
AGHFR
AGUBO
AGYEJ
AHHHB
AHJVU
AI.
AIEXJ
AIKHN
AITUG
AJBFU
AJOXV
ALMA_UNASSIGNED_HOLDINGS
AMFUW
AMRAJ
ASPBG
AVWKF
AXJTR
AZFZN
BJAXD
BKOJK
BLXMC
CS3
DU5
EBS
EFJIC
EFLBG
EJD
EO8
EO9
EP2
EP3
F5P
FDB
FEDTE
FGOYB
FIRID
FNPLU
FYGXN
G-2
G-Q
GBLVA
HVGLF
HZ~
IHE
J1W
JJJVA
KOM
LY7
M41
MO0
N9A
O-L
O9-
OAUVE
OZT
P-8
P-9
P2P
PC.
Q38
R2-
RIG
ROL
RPZ
SDF
SDG
SDP
SES
SET
SEW
SPC
SPCBC
SST
SSZ
T5K
T9H
TN5
VH1
WUQ
XPP
ZMT
~G-
AAXKI
AAYXX
AFJKZ
AKRWK
CITATION
7SR
8BQ
8FD
JG9
ID FETCH-LOGICAL-c273t-210563dd552c9b6d44ee7a15aef893253ca71a377b3d0d45ba5cdc774cf8e8bb3
IEDL.DBID AIKHN
ISSN 0142-1123
IngestDate Thu Oct 10 19:23:26 EDT 2024
Thu Sep 26 18:35:02 EDT 2024
Fri Feb 23 02:40:15 EST 2024
IsPeerReviewed true
IsScholarly true
Keywords Inconel 718
Fretting fatigue
Machining
Language English
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c273t-210563dd552c9b6d44ee7a15aef893253ca71a377b3d0d45ba5cdc774cf8e8bb3
PQID 2686215145
PQPubID 2045465
ParticipantIDs proquest_journals_2686215145
crossref_primary_10_1016_j_ijfatigue_2022_106963
elsevier_sciencedirect_doi_10_1016_j_ijfatigue_2022_106963
PublicationCentury 2000
PublicationDate September 2022
2022-09-00
20220901
PublicationDateYYYYMMDD 2022-09-01
PublicationDate_xml – month: 09
  year: 2022
  text: September 2022
PublicationDecade 2020
PublicationPlace Kidlington
PublicationPlace_xml – name: Kidlington
PublicationTitle International journal of fatigue
PublicationYear 2022
Publisher Elsevier Ltd
Elsevier BV
Publisher_xml – name: Elsevier Ltd
– name: Elsevier BV
References Mall, Kim, Porter, Ownby, Traylor (b0180) 2010; 32
Schafrik, Ward, Groh (b0010) 2001; 625
Araújo, Nowell (b0070) 2002; 24
Coelho, Silva, Braghini, Bezerra (b0210) 2004; 148
Proudhon, Fouvry, Buffière (b0110) 2005; 27
Volchok, Halperin, Etsion (b0120) 2002; 253
V. Martín, J. Vázquez, C. Navarro, J. Domínguez, Fretting-Fatigue Analysis of Shot-Peened Al 7075-T651 Test Specimens, Met. 2019, Vol. 9, Page 586. 9 (2019) 586. 10.3390/MET9050586.
Mall, Ng, Madhi, Neu, Wallin, Thompson (b0145) 2008; 5
Kawagoishi, Chen, Nisitani, Fatigue strength of Inconel 718 at elevated temperatures, Fatigue Fract. Eng. Mater. Struct. 23 (2000) 209–216. 10.1046/J.1460-2695.2000.00263.X.
Rahman, Senthil Kumar, Choudhury (b0230) 2000; 49
Waterhouse (b0170) 1981; 14
Attia (b0160) 2000
D.A. (David A. Hills, D. Nowell, Mechanics of fretting fatigue, Kluwer Academic Publishers, 1994. https://books.google.es/books/about/Mechanics_of_Fretting_Fatigue.html?id=t9Q60-N-13MC&printsec=frontcover&source=kp_read_button&redir_esc=y#v=onepage&q&f=false (accessed July 17, 2019).
Cantero, Díaz-Álvarez, Miguélez, Marín (b0255) 2013; 297
De Bartolomeis, Newman, Jawahir, Biermann, Shokrani (b0185) 2021; 297
Vázquez, Navarro, Domínguez (b0100) 2012; 40
Reed (b0005) 2006
Lindley (b0245) 1997; 19
Ulutan, Ozel (b0015) 2011; 51
Madariaga, Kortabarria, Hormaetxe, Garay, Arrazola (b0035) 2016; 45
Arunachalam, Mannan, Spowage (b0205) 2004; 44
Y. Lindblom, G. Burman, FATIGUE FAILURE UNDER FRETTING CONDITIONS Yngve Lindblom and Gunnnar Burman FFV Maintenance Division, SWEDEN, (1982).
Jeung, Do Kwon, Lee (b0165) 2015; 29
El-Khabeery, Fattouh (b0260) 1989; 29
Sabsabi, Giner, Fuenmayor (b0240) 2011; 33
Yin, Liu, Wang, Song, Cai (b0190) 2020; 109
Li, Fu, Li, Gai, Li, Zhou (b0125) 2016; 85
Szolwinski, Farris (b0065) 1996; 198
Ayesta, Izquierdo, Flaño, Sánchez, Albizuri, Avilés (b0040) 2016; 92
Gunnberg, Escursell, Jacobson (b0265) 2006; 174
Hutson, Niinomi, Nicholas, Eylon (b0115) 2002; 24
Waterhouse (b0250) 1992; 37
Pinto, Talemi, Araújo (b0075) 2022; 156
J.L. Cantero, J. Díaz-Álvarez, D. Infante-García, M. Rodríguez, V. Criado, High Speed Finish Turning of Inconel 718 Using PCBN Tools under Dry Conditions, Met. 2018, Vol. 8, Page 192. 8 (2018) 192. 10.3390/MET8030192.
Klotz, Delbergue, Bocher, Lévesque, Brochu (b0030) 2018; 110
Murthy, Mseis, Farris (b0135) 2009; 42
Findlay, Harrison (b0055) 2002; 5
Sharman, Hughes, Ridgway (b0200) 2006; 173
Muñoz-Sánchez, Canteli, Cantero, Miguélez (b0275) 2011; 19
Zhou, Bushlya, Peng, Chen, Johansson, Stahl (b0195) 2014; 13
Ciavarella, Demelio (b0235) 2001; 38
Holmberg, Wretland, Hammersberg, Berglund, Suárez, Beno (b0020) 2021; 144
R.B. Waterhouse, a J. Trowsdale, Residual stress and surface roughness in fretting fatigue, J. Phys. D. Appl. Phys. 25 (1992) A236–A239. 10.1088/0022-3727/25/1A/036.
Bramhall (b0090) 1973
Lee, Jeung, Kwon (b0150) 2016; 30
Pawade, Joshi, Brahmankar (b0215) 2008; 48
Klotz, Miao, Bianchetti, Lévesque, Brochu (b0025) 2018; 113
Fellows, Nowell, Hills (b0155) 1997; 20
Gean, Tate, Farris (b0140) 2009
J. Díaz-Álvarez, V. Criado, H. Miguélez, J.L. Cantero, PCBN Performance in High Speed Finishing Turning of Inconel 718, Met. 2018, Vol. 8, Page 582. 8 (2018) 582. 10.3390/MET8080582.
Bushlya, Zhou, Ståhl (b0270) 2012; 3
Gordelier, Chivers (b0080) 1979; 56
Wang, Huang, Zou, Liu, Zhu, Wang (b0045) 2018; 13
Takeda, Niinomi, Akahori, Gunawarman (b0105) 2004; 45
Zhang, Liu (b0130) 2009; 31
Muñoz-Sánchez (10.1016/j.ijfatigue.2022.106963_b0275) 2011; 19
De Bartolomeis (10.1016/j.ijfatigue.2022.106963_b0185) 2021; 297
El-Khabeery (10.1016/j.ijfatigue.2022.106963_b0260) 1989; 29
Araújo (10.1016/j.ijfatigue.2022.106963_b0070) 2002; 24
Volchok (10.1016/j.ijfatigue.2022.106963_b0120) 2002; 253
Zhou (10.1016/j.ijfatigue.2022.106963_b0195) 2014; 13
Schafrik (10.1016/j.ijfatigue.2022.106963_b0010) 2001; 625
Szolwinski (10.1016/j.ijfatigue.2022.106963_b0065) 1996; 198
Fellows (10.1016/j.ijfatigue.2022.106963_b0155) 1997; 20
Gean (10.1016/j.ijfatigue.2022.106963_b0140) 2009
Holmberg (10.1016/j.ijfatigue.2022.106963_b0020) 2021; 144
Coelho (10.1016/j.ijfatigue.2022.106963_b0210) 2004; 148
Waterhouse (10.1016/j.ijfatigue.2022.106963_b0170) 1981; 14
Rahman (10.1016/j.ijfatigue.2022.106963_b0230) 2000; 49
10.1016/j.ijfatigue.2022.106963_b0085
Hutson (10.1016/j.ijfatigue.2022.106963_b0115) 2002; 24
Sharman (10.1016/j.ijfatigue.2022.106963_b0200) 2006; 173
Findlay (10.1016/j.ijfatigue.2022.106963_b0055) 2002; 5
Vázquez (10.1016/j.ijfatigue.2022.106963_b0100) 2012; 40
Ayesta (10.1016/j.ijfatigue.2022.106963_b0040) 2016; 92
Pinto (10.1016/j.ijfatigue.2022.106963_b0075) 2022; 156
Klotz (10.1016/j.ijfatigue.2022.106963_b0025) 2018; 113
Mall (10.1016/j.ijfatigue.2022.106963_b0145) 2008; 5
Reed (10.1016/j.ijfatigue.2022.106963_b0005) 2006
Murthy (10.1016/j.ijfatigue.2022.106963_b0135) 2009; 42
Bramhall (10.1016/j.ijfatigue.2022.106963_b0090) 1973
10.1016/j.ijfatigue.2022.106963_b0175
Li (10.1016/j.ijfatigue.2022.106963_b0125) 2016; 85
Wang (10.1016/j.ijfatigue.2022.106963_b0045) 2018; 13
Jeung (10.1016/j.ijfatigue.2022.106963_b0165) 2015; 29
Ulutan (10.1016/j.ijfatigue.2022.106963_b0015) 2011; 51
10.1016/j.ijfatigue.2022.106963_b0050
10.1016/j.ijfatigue.2022.106963_b0095
Attia (10.1016/j.ijfatigue.2022.106963_b0160) 2000
Lee (10.1016/j.ijfatigue.2022.106963_b0150) 2016; 30
Proudhon (10.1016/j.ijfatigue.2022.106963_b0110) 2005; 27
Arunachalam (10.1016/j.ijfatigue.2022.106963_b0205) 2004; 44
Cantero (10.1016/j.ijfatigue.2022.106963_b0255) 2013; 297
Waterhouse (10.1016/j.ijfatigue.2022.106963_b0250) 1992; 37
Sabsabi (10.1016/j.ijfatigue.2022.106963_b0240) 2011; 33
Ciavarella (10.1016/j.ijfatigue.2022.106963_b0235) 2001; 38
Lindley (10.1016/j.ijfatigue.2022.106963_b0245) 1997; 19
Bushlya (10.1016/j.ijfatigue.2022.106963_b0270) 2012; 3
Klotz (10.1016/j.ijfatigue.2022.106963_b0030) 2018; 110
Yin (10.1016/j.ijfatigue.2022.106963_b0190) 2020; 109
Takeda (10.1016/j.ijfatigue.2022.106963_b0105) 2004; 45
10.1016/j.ijfatigue.2022.106963_b0220
Mall (10.1016/j.ijfatigue.2022.106963_b0180) 2010; 32
10.1016/j.ijfatigue.2022.106963_b0225
Gordelier (10.1016/j.ijfatigue.2022.106963_b0080) 1979; 56
Gunnberg (10.1016/j.ijfatigue.2022.106963_b0265) 2006; 174
10.1016/j.ijfatigue.2022.106963_b0060
Pawade (10.1016/j.ijfatigue.2022.106963_b0215) 2008; 48
Madariaga (10.1016/j.ijfatigue.2022.106963_b0035) 2016; 45
Zhang (10.1016/j.ijfatigue.2022.106963_b0130) 2009; 31
References_xml – volume: 33
  start-page: 811
  year: 2011
  end-page: 822
  ident: b0240
  article-title: Experimental fatigue testing of a fretting complete contact and numerical life correlation using X-FEM
  publication-title: Int J Fatigue
  contributor:
    fullname: Fuenmayor
– volume: 29
  start-page: 5241
  year: 2015
  end-page: 5244
  ident: b0165
  article-title: Crack initiation and propagation under fretting fatigue of inconel 600 alloy
  publication-title: J Mech Sci Technol
  contributor:
    fullname: Lee
– volume: 253
  start-page: 509
  year: 2002
  end-page: 515
  ident: b0120
  article-title: The effect of surface regular microtopography on fretting fatigue life
  publication-title: Wear
  contributor:
    fullname: Etsion
– volume: 48
  start-page: 15
  year: 2008
  end-page: 28
  ident: b0215
  article-title: Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
  publication-title: Int J Mach Tools Manuf
  contributor:
    fullname: Brahmankar
– volume: 42
  start-page: 1304
  year: 2009
  end-page: 1315
  ident: b0135
  article-title: Life estimation of Ti-6Al-4V specimens subjected to fretting fatigue and effect of surface treatments
  publication-title: Tribol Int
  contributor:
    fullname: Farris
– volume: 85
  start-page: 65
  year: 2016
  end-page: 69
  ident: b0125
  article-title: Fretting fatigue characteristic of Ti–6Al–4V strengthened by wet peening
  publication-title: Int J Fatigue
  contributor:
    fullname: Zhou
– volume: 297
  year: 2021
  ident: b0185
  article-title: Future research directions in the machining of Inconel 718
  publication-title: J Mater Process Technol
  contributor:
    fullname: Shokrani
– volume: 44
  start-page: 879
  year: 2004
  end-page: 887
  ident: b0205
  article-title: Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools
  publication-title: Int J Mach Tools Manuf
  contributor:
    fullname: Spowage
– volume: 173
  start-page: 359
  year: 2006
  end-page: 367
  ident: b0200
  article-title: An analysis of the residual stresses generated in Inconel 718
  publication-title: J Mater Process Technol
  contributor:
    fullname: Ridgway
– volume: 625
  start-page: 1
  year: 2001
  end-page: 11
  ident: b0010
  article-title: Application of alloy 718 in GE aircraft engines: past, present and next five years
  publication-title: Superalloys
  contributor:
    fullname: Groh
– volume: 37
  start-page: 77
  year: 1992
  end-page: 98
  ident: b0250
  article-title: Fretting fatigue
  publication-title: Int Mater Rev
  contributor:
    fullname: Waterhouse
– volume: 156
  year: 2022
  ident: b0075
  article-title: Fretting fatigue total life assessment including wear and a varying critical distance
  publication-title: Int J Fatigue
  contributor:
    fullname: Araújo
– volume: 27
  start-page: 569
  year: 2005
  end-page: 579
  ident: b0110
  article-title: A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume
  publication-title: Int J Fatigue
  contributor:
    fullname: Buffière
– volume: 5
  start-page: 18
  year: 2002
  end-page: 25
  ident: b0055
  article-title: Why aircraft fail
  publication-title: Mater Today
  contributor:
    fullname: Harrison
– volume: 51
  start-page: 250
  year: 2011
  end-page: 280
  ident: b0015
  article-title: Machining induced surface integrity in titanium and nickel alloys: A review
  publication-title: Int J Mach Tools Manuf
  contributor:
    fullname: Ozel
– volume: 49
  start-page: 47
  year: 2000
  end-page: 52
  ident: b0230
  article-title: Identification of Effective Zones for High Pressure Coolant in Milling
  publication-title: CIRP Ann
  contributor:
    fullname: Choudhury
– volume: 30
  start-page: 4937
  year: 2016
  end-page: 4940
  ident: b0150
  article-title: Fretting fatigue crack initiation and propagation behavior of Inconel 690 alloy †
  publication-title: J Mech Sci Technol
  contributor:
    fullname: Kwon
– volume: 40
  start-page: 143
  year: 2012
  end-page: 153
  ident: b0100
  article-title: Experimental results in fretting fatigue with shot and laser peened Al 7075–T651 specimens
  publication-title: Int J Fatigue
  contributor:
    fullname: Domínguez
– year: 1973
  ident: b0090
  article-title: Studies in Fretting Fatigue
  contributor:
    fullname: Bramhall
– start-page: 2626
  year: 2009
  ident: b0140
  article-title: Fretting fatigue of nickel based superalloys at elevated temperature
  publication-title: Collect Tech Pap - AIAA/ASME/ASCE/AHS/ASC Struct Struct Dyn Mater Conf
  contributor:
    fullname: Farris
– volume: 92
  start-page: 220
  year: 2016
  end-page: 233
  ident: b0040
  article-title: Influence of the WEDM process on the fatigue behavior of Inconel® 718
  publication-title: Int J Fatigue
  contributor:
    fullname: Avilés
– volume: 24
  start-page: 763
  year: 2002
  end-page: 775
  ident: b0070
  article-title: The effect of rapidly varying contact stress fields on fretting fatigue
  publication-title: Int J Fatigue
  contributor:
    fullname: Nowell
– volume: 144
  year: 2021
  ident: b0020
  article-title: Surface integrity investigations for prediction of fatigue properties after machining of alloy 718
  publication-title: Int J Fatigue
  contributor:
    fullname: Beno
– volume: 45
  start-page: 267
  year: 2016
  end-page: 270
  ident: b0035
  article-title: Influence of Tool Wear on Residual Stresses When Turning Inconel 718
  publication-title: Procedia CIRP
  contributor:
    fullname: Arrazola
– volume: 19
  start-page: 872
  year: 2011
  end-page: 886
  ident: b0275
  article-title: Numerical analysis of the tool wear effect in the machining induced residual stresses
  publication-title: Simul Model Pract Theory
  contributor:
    fullname: Miguélez
– volume: 297
  start-page: 885
  year: 2013
  end-page: 894
  ident: b0255
  article-title: Analysis of tool wear patterns in finishing turning of Inconel 718
  publication-title: Wear
  contributor:
    fullname: Marín
– volume: 113
  start-page: 204
  year: 2018
  end-page: 221
  ident: b0025
  article-title: Analytical fatigue life prediction of shot peened Inconel 718
  publication-title: Int J Fatigue
  contributor:
    fullname: Brochu
– volume: 13
  start-page: 243
  year: 2018
  end-page: 250
  ident: b0045
  article-title: Experimental study of surface integrity and fatigue life in the face milling of Inconel 718, Front
  publication-title: Mech Eng
  contributor:
    fullname: Wang
– volume: 32
  start-page: 1289
  year: 2010
  end-page: 1298
  ident: b0180
  article-title: High temperature fretting fatigue behavior of IN100
  publication-title: Int J Fatigue
  contributor:
    fullname: Traylor
– volume: 198
  start-page: 93
  year: 1996
  end-page: 107
  ident: b0065
  article-title: Mechanics of fretting fatigue crack formation
  publication-title: Wear
  contributor:
    fullname: Farris
– volume: 19
  start-page: 39
  year: 1997
  end-page: 49
  ident: b0245
  article-title: Fretting fatigue in engineering alloys
  publication-title: Int J Fatigue
  contributor:
    fullname: Lindley
– volume: 5
  year: 2008
  ident: b0145
  article-title: Fretting Fatigue Behavior of Shot-Peened Ti-6Al-4V and IN100
  publication-title: J ASTM Int
  contributor:
    fullname: Thompson
– volume: 56
  start-page: 177
  year: 1979
  end-page: 190
  ident: b0080
  article-title: A literature review of palliatives for fretting fatigue
  publication-title: Wear
  contributor:
    fullname: Chivers
– volume: 38
  start-page: 1791
  year: 2001
  end-page: 1811
  ident: b0235
  article-title: A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints
  publication-title: Int J Solids Struct
  contributor:
    fullname: Demelio
– volume: 148
  start-page: 147
  year: 2004
  end-page: 153
  ident: b0210
  article-title: Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718
  publication-title: J Mater Process Technol
  contributor:
    fullname: Bezerra
– volume: 174
  start-page: 82
  year: 2006
  end-page: 90
  ident: b0265
  article-title: The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel
  publication-title: J Mater Process Technol
  contributor:
    fullname: Jacobson
– volume: 45
  start-page: 1586
  year: 2004
  end-page: 1593
  ident: b0105
  article-title: Fretting Fatigue Characteristics with Relating Contact Pressure and Surface Roughness of Highly Workable Titanium Alloy, Ti-4.5Al-3V-2Mo-2Fe
  publication-title: Mater Trans
  contributor:
    fullname: Gunawarman
– volume: 14
  start-page: 203
  year: 1981
  end-page: 207
  ident: b0170
  article-title: Fretting at high temperatures
  publication-title: Tribol Int
  contributor:
    fullname: Waterhouse
– year: 2006
  ident: b0005
  article-title: The Superalloys fundamentals and applications
  publication-title: Cambridge University Press
  contributor:
    fullname: Reed
– volume: 110
  start-page: 10
  year: 2018
  end-page: 21
  ident: b0030
  article-title: Surface characteristics and fatigue behavior of shot peened Inconel 718
  publication-title: Int J Fatigue
  contributor:
    fullname: Brochu
– volume: 109
  start-page: 215
  year: 2020
  end-page: 245
  ident: b0190
  article-title: Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review
  publication-title: Int J Adv Manuf Technol
  contributor:
    fullname: Cai
– volume: 3
  start-page: 370
  year: 2012
  end-page: 375
  ident: b0270
  article-title: Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
  publication-title: Procedia CIRP
  contributor:
    fullname: Ståhl
– volume: 29
  start-page: 391
  year: 1989
  end-page: 401
  ident: b0260
  article-title: Residual stress distribution caused by milling
  publication-title: Int J Mach Tools Manuf
  contributor:
    fullname: Fattouh
– volume: 24
  start-page: 1223
  year: 2002
  end-page: 1234
  ident: b0115
  article-title: Effect of various surface conditions on fretting fatigue behavior of Ti-6Al-4V
  publication-title: Int J Fatigue
  contributor:
    fullname: Eylon
– volume: 31
  start-page: 889
  year: 2009
  end-page: 893
  ident: b0130
  article-title: Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature
  publication-title: Int J Fatigue
  contributor:
    fullname: Liu
– volume: 13
  start-page: 150
  year: 2014
  end-page: 155
  ident: b0195
  article-title: Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools
  publication-title: Procedia CIRP
  contributor:
    fullname: Stahl
– start-page: 231
  year: 2000
  end-page: 246
  ident: b0160
  article-title: Fretting Fatigue of Some Nickel-Based Alloys in Steam Environment at 265°C, ASTM Spec
  publication-title: Tech Publ
  contributor:
    fullname: Attia
– volume: 20
  start-page: 61
  year: 1997
  end-page: 70
  ident: b0155
  article-title: ANALYSIS OF CRACK INITIATION AND PROPAGATION IN FRETTING FATIGUE: THE EFFECTIVE INITIAL FLAW SIZE METHODOLOGY
  publication-title: Fatigue Fract Eng Mater Struct
  contributor:
    fullname: Hills
– year: 2006
  ident: 10.1016/j.ijfatigue.2022.106963_b0005
  article-title: The Superalloys fundamentals and applications
  publication-title: Cambridge University Press
  contributor:
    fullname: Reed
– volume: 56
  start-page: 177
  year: 1979
  ident: 10.1016/j.ijfatigue.2022.106963_b0080
  article-title: A literature review of palliatives for fretting fatigue
  publication-title: Wear
  doi: 10.1016/0043-1648(79)90017-6
  contributor:
    fullname: Gordelier
– volume: 37
  start-page: 77
  year: 1992
  ident: 10.1016/j.ijfatigue.2022.106963_b0250
  article-title: Fretting fatigue
  publication-title: Int Mater Rev
  doi: 10.1179/imr.1992.37.1.77
  contributor:
    fullname: Waterhouse
– volume: 31
  start-page: 889
  year: 2009
  ident: 10.1016/j.ijfatigue.2022.106963_b0130
  article-title: Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2008.10.004
  contributor:
    fullname: Zhang
– volume: 148
  start-page: 147
  year: 2004
  ident: 10.1016/j.ijfatigue.2022.106963_b0210
  article-title: Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718TM at high cutting speeds
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2004.02.001
  contributor:
    fullname: Coelho
– ident: 10.1016/j.ijfatigue.2022.106963_b0225
  doi: 10.3390/met8080582
– volume: 20
  start-page: 61
  year: 1997
  ident: 10.1016/j.ijfatigue.2022.106963_b0155
  article-title: ANALYSIS OF CRACK INITIATION AND PROPAGATION IN FRETTING FATIGUE: THE EFFECTIVE INITIAL FLAW SIZE METHODOLOGY
  publication-title: Fatigue Fract Eng Mater Struct
  doi: 10.1111/j.1460-2695.1997.tb00402.x
  contributor:
    fullname: Fellows
– start-page: 231
  year: 2000
  ident: 10.1016/j.ijfatigue.2022.106963_b0160
  article-title: Fretting Fatigue of Some Nickel-Based Alloys in Steam Environment at 265°C, ASTM Spec
  publication-title: Tech Publ
  contributor:
    fullname: Attia
– volume: 44
  start-page: 879
  year: 2004
  ident: 10.1016/j.ijfatigue.2022.106963_b0205
  article-title: Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2004.02.016
  contributor:
    fullname: Arunachalam
– volume: 45
  start-page: 267
  year: 2016
  ident: 10.1016/j.ijfatigue.2022.106963_b0035
  article-title: Influence of Tool Wear on Residual Stresses When Turning Inconel 718
  publication-title: Procedia CIRP
  doi: 10.1016/j.procir.2016.02.359
  contributor:
    fullname: Madariaga
– volume: 253
  start-page: 509
  year: 2002
  ident: 10.1016/j.ijfatigue.2022.106963_b0120
  article-title: The effect of surface regular microtopography on fretting fatigue life
  publication-title: Wear
  doi: 10.1016/S0043-1648(02)00148-5
  contributor:
    fullname: Volchok
– volume: 29
  start-page: 5241
  year: 2015
  ident: 10.1016/j.ijfatigue.2022.106963_b0165
  article-title: Crack initiation and propagation under fretting fatigue of inconel 600 alloy
  publication-title: J Mech Sci Technol
  doi: 10.1007/s12206-015-1124-8
  contributor:
    fullname: Jeung
– volume: 3
  start-page: 370
  year: 2012
  ident: 10.1016/j.ijfatigue.2022.106963_b0270
  article-title: Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
  publication-title: Procedia CIRP
  doi: 10.1016/j.procir.2012.07.064
  contributor:
    fullname: Bushlya
– start-page: 2626
  year: 2009
  ident: 10.1016/j.ijfatigue.2022.106963_b0140
  article-title: Fretting fatigue of nickel based superalloys at elevated temperature
  publication-title: Collect Tech Pap - AIAA/ASME/ASCE/AHS/ASC Struct Struct Dyn Mater Conf
  contributor:
    fullname: Gean
– volume: 48
  start-page: 15
  year: 2008
  ident: 10.1016/j.ijfatigue.2022.106963_b0215
  article-title: Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2007.08.004
  contributor:
    fullname: Pawade
– ident: 10.1016/j.ijfatigue.2022.106963_b0175
  doi: 10.1046/j.1460-2695.2000.00263.x
– ident: 10.1016/j.ijfatigue.2022.106963_b0085
  doi: 10.1088/0022-3727/25/1A/036
– volume: 19
  start-page: 872
  year: 2011
  ident: 10.1016/j.ijfatigue.2022.106963_b0275
  article-title: Numerical analysis of the tool wear effect in the machining induced residual stresses
  publication-title: Simul Model Pract Theory
  doi: 10.1016/j.simpat.2010.11.011
  contributor:
    fullname: Muñoz-Sánchez
– volume: 38
  start-page: 1791
  year: 2001
  ident: 10.1016/j.ijfatigue.2022.106963_b0235
  article-title: A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints
  publication-title: Int J Solids Struct
  doi: 10.1016/S0020-7683(00)00136-0
  contributor:
    fullname: Ciavarella
– volume: 51
  start-page: 250
  year: 2011
  ident: 10.1016/j.ijfatigue.2022.106963_b0015
  article-title: Machining induced surface integrity in titanium and nickel alloys: A review
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/j.ijmachtools.2010.11.003
  contributor:
    fullname: Ulutan
– year: 1973
  ident: 10.1016/j.ijfatigue.2022.106963_b0090
  contributor:
    fullname: Bramhall
– volume: 110
  start-page: 10
  year: 2018
  ident: 10.1016/j.ijfatigue.2022.106963_b0030
  article-title: Surface characteristics and fatigue behavior of shot peened Inconel 718
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2018.01.005
  contributor:
    fullname: Klotz
– volume: 45
  start-page: 1586
  issue: 5
  year: 2004
  ident: 10.1016/j.ijfatigue.2022.106963_b0105
  article-title: Fretting Fatigue Characteristics with Relating Contact Pressure and Surface Roughness of Highly Workable Titanium Alloy, Ti-4.5Al-3V-2Mo-2Fe
  publication-title: Mater Trans
  doi: 10.2320/matertrans.45.1586
  contributor:
    fullname: Takeda
– volume: 13
  start-page: 243
  year: 2018
  ident: 10.1016/j.ijfatigue.2022.106963_b0045
  article-title: Experimental study of surface integrity and fatigue life in the face milling of Inconel 718, Front
  publication-title: Mech Eng
  contributor:
    fullname: Wang
– volume: 30
  start-page: 4937
  year: 2016
  ident: 10.1016/j.ijfatigue.2022.106963_b0150
  article-title: Fretting fatigue crack initiation and propagation behavior of Inconel 690 alloy †
  publication-title: J Mech Sci Technol
  doi: 10.1007/s12206-016-1013-9
  contributor:
    fullname: Lee
– volume: 173
  start-page: 359
  year: 2006
  ident: 10.1016/j.ijfatigue.2022.106963_b0200
  article-title: An analysis of the residual stresses generated in Inconel 718TM when turning
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2005.12.007
  contributor:
    fullname: Sharman
– volume: 49
  start-page: 47
  year: 2000
  ident: 10.1016/j.ijfatigue.2022.106963_b0230
  article-title: Identification of Effective Zones for High Pressure Coolant in Milling
  publication-title: CIRP Ann
  doi: 10.1016/S0007-8506(07)62893-5
  contributor:
    fullname: Rahman
– volume: 625
  start-page: 1
  year: 2001
  ident: 10.1016/j.ijfatigue.2022.106963_b0010
  article-title: Application of alloy 718 in GE aircraft engines: past, present and next five years
  publication-title: Superalloys
  contributor:
    fullname: Schafrik
– volume: 24
  start-page: 763
  year: 2002
  ident: 10.1016/j.ijfatigue.2022.106963_b0070
  article-title: The effect of rapidly varying contact stress fields on fretting fatigue
  publication-title: Int J Fatigue
  doi: 10.1016/S0142-1123(01)00191-8
  contributor:
    fullname: Araújo
– volume: 24
  start-page: 1223
  year: 2002
  ident: 10.1016/j.ijfatigue.2022.106963_b0115
  article-title: Effect of various surface conditions on fretting fatigue behavior of Ti-6Al-4V
  publication-title: Int J Fatigue
  doi: 10.1016/S0142-1123(02)00050-6
  contributor:
    fullname: Hutson
– volume: 29
  start-page: 391
  year: 1989
  ident: 10.1016/j.ijfatigue.2022.106963_b0260
  article-title: Residual stress distribution caused by milling
  publication-title: Int J Mach Tools Manuf
  doi: 10.1016/0890-6955(89)90008-4
  contributor:
    fullname: El-Khabeery
– volume: 174
  start-page: 82
  year: 2006
  ident: 10.1016/j.ijfatigue.2022.106963_b0265
  article-title: The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2005.02.262
  contributor:
    fullname: Gunnberg
– volume: 156
  year: 2022
  ident: 10.1016/j.ijfatigue.2022.106963_b0075
  article-title: Fretting fatigue total life assessment including wear and a varying critical distance
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2021.106589
  contributor:
    fullname: Pinto
– volume: 144
  year: 2021
  ident: 10.1016/j.ijfatigue.2022.106963_b0020
  article-title: Surface integrity investigations for prediction of fatigue properties after machining of alloy 718
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2020.106059
  contributor:
    fullname: Holmberg
– volume: 33
  start-page: 811
  year: 2011
  ident: 10.1016/j.ijfatigue.2022.106963_b0240
  article-title: Experimental fatigue testing of a fretting complete contact and numerical life correlation using X-FEM
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2010.12.012
  contributor:
    fullname: Sabsabi
– volume: 109
  start-page: 215
  year: 2020
  ident: 10.1016/j.ijfatigue.2022.106963_b0190
  article-title: Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review
  publication-title: Int J Adv Manuf Technol
  doi: 10.1007/s00170-020-05665-4
  contributor:
    fullname: Yin
– volume: 92
  start-page: 220
  year: 2016
  ident: 10.1016/j.ijfatigue.2022.106963_b0040
  article-title: Influence of the WEDM process on the fatigue behavior of Inconel® 718
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2016.07.011
  contributor:
    fullname: Ayesta
– volume: 13
  start-page: 150
  year: 2014
  ident: 10.1016/j.ijfatigue.2022.106963_b0195
  article-title: Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools
  publication-title: Procedia CIRP
  doi: 10.1016/j.procir.2014.04.026
  contributor:
    fullname: Zhou
– volume: 297
  year: 2021
  ident: 10.1016/j.ijfatigue.2022.106963_b0185
  article-title: Future research directions in the machining of Inconel 718
  publication-title: J Mater Process Technol
  doi: 10.1016/j.jmatprotec.2021.117260
  contributor:
    fullname: De Bartolomeis
– ident: 10.1016/j.ijfatigue.2022.106963_b0060
– volume: 40
  start-page: 143
  year: 2012
  ident: 10.1016/j.ijfatigue.2022.106963_b0100
  article-title: Experimental results in fretting fatigue with shot and laser peened Al 7075–T651 specimens
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2011.12.014
  contributor:
    fullname: Vázquez
– volume: 14
  start-page: 203
  year: 1981
  ident: 10.1016/j.ijfatigue.2022.106963_b0170
  article-title: Fretting at high temperatures
  publication-title: Tribol Int
  doi: 10.1016/0301-679X(81)90041-4
  contributor:
    fullname: Waterhouse
– volume: 297
  start-page: 885
  year: 2013
  ident: 10.1016/j.ijfatigue.2022.106963_b0255
  article-title: Analysis of tool wear patterns in finishing turning of Inconel 718
  publication-title: Wear
  doi: 10.1016/j.wear.2012.11.004
  contributor:
    fullname: Cantero
– ident: 10.1016/j.ijfatigue.2022.106963_b0095
  doi: 10.3390/met9050586
– volume: 42
  start-page: 1304
  year: 2009
  ident: 10.1016/j.ijfatigue.2022.106963_b0135
  article-title: Life estimation of Ti-6Al-4V specimens subjected to fretting fatigue and effect of surface treatments
  publication-title: Tribol Int
  doi: 10.1016/j.triboint.2009.04.013
  contributor:
    fullname: Murthy
– volume: 19
  start-page: 39
  year: 1997
  ident: 10.1016/j.ijfatigue.2022.106963_b0245
  article-title: Fretting fatigue in engineering alloys
  publication-title: Int J Fatigue
  doi: 10.1016/S0142-1123(97)00039-X
  contributor:
    fullname: Lindley
– ident: 10.1016/j.ijfatigue.2022.106963_b0220
  doi: 10.3390/met8030192
– volume: 32
  start-page: 1289
  year: 2010
  ident: 10.1016/j.ijfatigue.2022.106963_b0180
  article-title: High temperature fretting fatigue behavior of IN100
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2010.01.012
  contributor:
    fullname: Mall
– volume: 5
  start-page: 18
  year: 2002
  ident: 10.1016/j.ijfatigue.2022.106963_b0055
  article-title: Why aircraft fail
  publication-title: Mater Today
  doi: 10.1016/S1369-7021(02)01138-0
  contributor:
    fullname: Findlay
– volume: 27
  start-page: 569
  year: 2005
  ident: 10.1016/j.ijfatigue.2022.106963_b0110
  article-title: A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2004.09.001
  contributor:
    fullname: Proudhon
– volume: 85
  start-page: 65
  year: 2016
  ident: 10.1016/j.ijfatigue.2022.106963_b0125
  article-title: Fretting fatigue characteristic of Ti–6Al–4V strengthened by wet peening
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2015.12.013
  contributor:
    fullname: Li
– volume: 113
  start-page: 204
  year: 2018
  ident: 10.1016/j.ijfatigue.2022.106963_b0025
  article-title: Analytical fatigue life prediction of shot peened Inconel 718
  publication-title: Int J Fatigue
  doi: 10.1016/j.ijfatigue.2018.04.011
  contributor:
    fullname: Klotz
– volume: 5
  year: 2008
  ident: 10.1016/j.ijfatigue.2022.106963_b0145
  article-title: Fretting Fatigue Behavior of Shot-Peened Ti-6Al-4V and IN100
  publication-title: J ASTM Int
  doi: 10.1520/JAI101587
  contributor:
    fullname: Mall
– ident: 10.1016/j.ijfatigue.2022.106963_b0050
  doi: 10.1007/978-94-009-7907-9_31
– volume: 198
  start-page: 93
  year: 1996
  ident: 10.1016/j.ijfatigue.2022.106963_b0065
  article-title: Mechanics of fretting fatigue crack formation
  publication-title: Wear
  doi: 10.1016/0043-1648(96)06937-2
  contributor:
    fullname: Szolwinski
SSID ssj0009075
Score 2.4261982
Snippet [Display omitted] •Tool wear is the most relevant machining parameter affecting fretting fatigue.•Residual stresses proved to be a relevant indicator of...
This work focuses on the analysis of the influence of different machining factors on the fretting fatigue behaviour of Inconel 718. Fretting fatigue tests...
SourceID proquest
crossref
elsevier
SourceType Aggregation Database
Publisher
StartPage 106963
SubjectTerms Fatigue failure
Fatigue life
Fatigue tests
Fretting
Fretting fatigue
Inconel 718
Machining
Materials fatigue
Nickel base alloys
Process parameters
Residual stress
Superalloys
Surface roughness
Tool wear
Title Influence of machining parameters on fretting fatigue life of Inconel 718
URI https://dx.doi.org/10.1016/j.ijfatigue.2022.106963
https://www.proquest.com/docview/2686215145
Volume 162
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV07T8MwED71scCAeIpCqTywhuZh58FWVVQtiE5U6mbZsS2latOKlpXfzjkPoEiIgTFO7Fifk7vvrM93ALcmjGMZ-8bRniccKlLqJKnBYEUZV4WuFF5Rzud5Go5n9HHO5g0Y1mdhrKyysv2lTS-sddXSr9Dsb7Ksb2VJGL0gI7A6g8CPm9BGd0RpC9qDydN4-pV7t8y3a593bIc9mVe2MAiB3SXx0Z1ha5iEwW9O6oe5LnzQ6BiOKvJIBuX8TqCh81M4_JZS8Awmk7rqCFkbsiqkkniD2BTfKyt92ZJ1ToyV59rmalZkmZmiA5qLda6XBH3JOcxGDy_DsVOVS3BS5CA7B4M3FgZKMeaniQwVpVpHwmNCGyQlPgtSEXkiiCIZKFdRJgVLVYr0D9dGx1IGF9DK8R2XQGgsqImUiWNbDibCgDtRodFC4-AJjt4Bt8aHb8qsGLyWiy34J6TcQspLSDtwX-PI9xaYo-3-u3O3Rp5X_9iW-_ZwCxIWyq7-M_Y1HNirUjfWhdbu9U3fINHYyR407969XvU5fQCf-9Lt
link.rule.ids 315,786,790,4521,24144,27955,27956,45618,45712
linkProvider Elsevier
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1LTwIxEG4QD-rB-Iwoag9eV_bRdrveDJGAAidIuDXttk0gsBDBq7_d6T5UTIwHr31t83V35pvN1xmE7izjXPHQeiYIpEdkSrwktRCsaOtr5isZ5OV8BkPWHZPnCZ3UULu6C-NklaXtL2x6bq3LllaJZms1nbacLAmiF2AETmcQhXwH7To24HRd9-9fOo-kyLbrRntu-JbIazqzAID7RxKCM4NWlrDoNxf1w1jnHqhzhA5L6ogfi90do5rJTtDBt4SCp6jXq2qO4KXFi1woCR3YJfheOOHLGi8zbJ041zWXu8Lzqc0ngLFYZmaOwZOcoXHnadTuemWxBC8FBrLxIHSjLNKa0jBNFNOEGBPLgEpjgZKENEplHMgojlWkfU2okjTVKZA_OBnDlYrOUT2DZ1wgTLgkNtaWc1cMJoZwO9HMGmlg8QRWbyC_wkesipwYohKLzcQnpMJBKgpIG-ihwlFsHa8Ay_335GaFvCi_sLUI3dUWoCuEXv5n7Vu01x0N-qLfG75coX3XUyjImqi-eX0z10A5Nuomf6U-AHxQ08I
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Influence+of+machining+parameters+on+fretting+fatigue+life+of+Inconel+718&rft.jtitle=International+journal+of+fatigue&rft.au=Infante-Garc%C3%ADa%2C+D.&rft.au=D%C3%ADaz-%C3%81lvarez%2C+A.&rft.au=Belda%2C+R.&rft.au=D%C3%ADaz-%C3%81lvarez%2C+J.&rft.date=2022-09-01&rft.issn=0142-1123&rft.volume=162&rft.spage=106963&rft_id=info:doi/10.1016%2Fj.ijfatigue.2022.106963&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_ijfatigue_2022_106963
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0142-1123&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0142-1123&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0142-1123&client=summon