Investigation on the parameters optimization and sliding wear behaviors under starved lubrication of discrete laser surface hardened 25CrNi2MoV steel
The discrete laser surface hardening (DLSH) parameters of 25CrNi2MoV steel were synthetically optimized and employed to enhance the surface sliding wear resistance under starved lubrication. Results showed that the DLSH treatment changed the sample’s surface microstructures, local hardness and resid...
Saved in:
Published in | Tribology international Vol. 163; p. 107176 |
---|---|
Main Authors | , , , , , |
Format | Journal Article |
Language | English |
Published |
Kidlington
Elsevier Ltd
01.11.2021
Elsevier BV |
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | The discrete laser surface hardening (DLSH) parameters of 25CrNi2MoV steel were synthetically optimized and employed to enhance the surface sliding wear resistance under starved lubrication. Results showed that the DLSH treatment changed the sample’s surface microstructures, local hardness and residual compressive stress. The proper surface quality and hardening depth can be obtained in the laser power range of 400–500 W. DLSH treatment delayed the occurrence time of severe scuffing failure and decreased the wear loss. The formed arc-shaped dimples in substrate zone between the hardened spots helped to reduce the coefficient of friction. Different matching strategies of laser power and irradiation time caused the differences of surface wear mechanism.
•Laser surface hardening parameters of 25CrNi2MoV steel was synthetically optimized.•Hardness of hardened spots was 31.1–35% higher than that of the untreated samples.•DLSH treatment delayed the occurrence time of severe scuffing failure during wear.•Combined high laser power and short irradiation time had a better wear resistance.•DLSH treatment may increase the degree of delamination wear or adhesive wear. |
---|---|
AbstractList | The discrete laser surface hardening (DLSH) parameters of 25CrNi2MoV steel were synthetically optimized and employed to enhance the surface sliding wear resistance under starved lubrication. Results showed that the DLSH treatment changed the sample's surface microstructures, local hardness and residual compressive stress. The proper surface quality and hardening depth can be obtained in the laser power range of 400–500 W. DLSH treatment delayed the occurrence time of severe scuffing failure and decreased the wear loss. The formed arc-shaped dimples in substrate zone between the hardened spots helped to reduce the coefficient of friction. Different matching strategies of laser power and irradiation time caused the differences of surface wear mechanism. The discrete laser surface hardening (DLSH) parameters of 25CrNi2MoV steel were synthetically optimized and employed to enhance the surface sliding wear resistance under starved lubrication. Results showed that the DLSH treatment changed the sample’s surface microstructures, local hardness and residual compressive stress. The proper surface quality and hardening depth can be obtained in the laser power range of 400–500 W. DLSH treatment delayed the occurrence time of severe scuffing failure and decreased the wear loss. The formed arc-shaped dimples in substrate zone between the hardened spots helped to reduce the coefficient of friction. Different matching strategies of laser power and irradiation time caused the differences of surface wear mechanism. •Laser surface hardening parameters of 25CrNi2MoV steel was synthetically optimized.•Hardness of hardened spots was 31.1–35% higher than that of the untreated samples.•DLSH treatment delayed the occurrence time of severe scuffing failure during wear.•Combined high laser power and short irradiation time had a better wear resistance.•DLSH treatment may increase the degree of delamination wear or adhesive wear. |
ArticleNumber | 107176 |
Author | Jiang, Li Hu, Xiongfeng Lai, Fuqiang Li, Xiaoqiang Jia, Siyu Qu, Shengguan |
Author_xml | – sequence: 1 givenname: Xiongfeng surname: Hu fullname: Hu, Xiongfeng organization: Guangdong Key Laboratory for Advanced Metallic Materials Processing, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China – sequence: 2 givenname: Siyu surname: Jia fullname: Jia, Siyu organization: Guangdong Key Laboratory for Advanced Metallic Materials Processing, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China – sequence: 3 givenname: Fuqiang surname: Lai fullname: Lai, Fuqiang email: laifuqiang@fzu.edu.cn organization: School of Mechanical Engineering and Automation, Qishan Campus, Fuzhou University, Fuzhou 350108, China – sequence: 4 givenname: Li surname: Jiang fullname: Jiang, Li organization: Weichai Power Co., Ltd., Weifang 261061, China – sequence: 5 givenname: Xiaoqiang surname: Li fullname: Li, Xiaoqiang organization: Guangdong Key Laboratory for Advanced Metallic Materials Processing, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China – sequence: 6 givenname: Shengguan surname: Qu fullname: Qu, Shengguan email: qusg@scut.edu.cn organization: Guangdong Key Laboratory for Advanced Metallic Materials Processing, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China |
BookMark | eNqFkd9qVDEQh4O04Lb1FSTg9VmT7Pl7pyxaC1VvqngX5iSTbpazyTrJWbHv4fua5dRrITCQfPMNk98VuwgxIGOvpVhLIdu3-3UmP0Yf8loJJctlJ7v2BVvJvhsqVbf1BVuJjZBV2w0_XrKrlPZCiK4euhX7cxdOmLJ_hOxj4OXkHfIjEBwwIyUej9kf_NPyDMHyNHnrwyP_hUB8xB2cfCzcHCwSTxnohJZP80jePDsdtz4ZKj4-QTpTMzkwyHdAFkPBVbOlL159jt-LAXG6YZcOpoSvnus1-_bxw8P2U3X_9fZu-_6-MqoTuTIwNsa5EdCBGuSmATliXztb6qDGUQxKgHFgTe2wh7L-0Djbq7F1bQ3Qbq7Zm8V7pPhzLv-g93GmUEZq1bR9JzZKyEK1C2UopkTo9JH8Aei3lkKfI9B7_S8CfY5ALxGUxndLI5YdTh5JJ-MxGLSe0GRto_-f4i9OJZpW |
CitedBy_id | crossref_primary_10_1016_j_optlastec_2023_110359 crossref_primary_10_1016_j_optlastec_2023_109598 crossref_primary_10_1016_j_optlastec_2023_110322 crossref_primary_10_1177_13506501221143071 crossref_primary_10_1016_j_optlastec_2022_108370 crossref_primary_10_1016_j_molliq_2024_124551 crossref_primary_10_1016_j_compstruct_2024_118027 crossref_primary_10_1016_j_jmrt_2024_02_037 crossref_primary_10_1007_s11249_023_01821_5 crossref_primary_10_1016_j_msea_2022_144495 crossref_primary_10_1007_s11665_022_07277_3 |
Cites_doi | 10.4271/2016-01-0656 10.1016/j.triboint.2017.12.028 10.1016/j.optlastec.2020.106136 10.1016/j.triboint.2018.10.047 10.1007/BF00780472 10.1016/j.wear.2019.01.061 10.1016/j.vacuum.2017.06.010 10.1016/j.triboint.2019.105869 10.1103/PhysRevB.57.14698 10.1007/s12540-011-0223-z 10.1016/j.triboint.2016.09.020 10.1590/0104-1428.1961 10.1016/j.optlastec.2017.08.007 10.1016/j.wear.2009.06.019 10.2355/isijinternational.43.1475 10.3390/lubricants6030061 10.4271/2015-01-0683 10.2351/1.1710879 10.1063/1.369610 10.1016/S0890-6955(00)00117-6 10.1016/j.jmatprotec.2016.08.035 10.1016/j.msea.2014.01.083 10.1016/j.triboint.2016.03.015 10.1016/j.apsusc.2017.09.009 10.1016/j.triboint.2014.04.017 10.1016/0043-1648(77)90081-3 10.1016/S0921-5093(99)00066-0 10.1016/j.triboint.2017.06.004 10.1007/s00170-017-0920-y 10.1016/S0924-0136(00)00582-3 10.1016/j.triboint.2010.12.009 10.3390/met10030351 10.1016/j.triboint.2017.05.028 |
ContentType | Journal Article |
Copyright | 2021 Elsevier Ltd Copyright Elsevier BV Nov 2021 |
Copyright_xml | – notice: 2021 Elsevier Ltd – notice: Copyright Elsevier BV Nov 2021 |
DBID | AAYXX CITATION 7SR 7TB 7U5 8BQ 8FD F28 FR3 JG9 L7M |
DOI | 10.1016/j.triboint.2021.107176 |
DatabaseName | CrossRef Engineered Materials Abstracts Mechanical & Transportation Engineering Abstracts Solid State and Superconductivity Abstracts METADEX Technology Research Database ANTE: Abstracts in New Technology & Engineering Engineering Research Database Materials Research Database Advanced Technologies Database with Aerospace |
DatabaseTitle | CrossRef Materials Research Database Engineered Materials Abstracts Technology Research Database Mechanical & Transportation Engineering Abstracts Solid State and Superconductivity Abstracts Engineering Research Database Advanced Technologies Database with Aerospace ANTE: Abstracts in New Technology & Engineering METADEX |
DatabaseTitleList | Materials Research Database |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EISSN | 1879-2464 |
ExternalDocumentID | 10_1016_j_triboint_2021_107176 S0301679X21003248 |
GroupedDBID | --K --M .DC .~1 0R~ 123 1B1 1~. 1~5 29Q 4.4 457 4G. 5VS 7-5 71M 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AAXUO ABDEX ABJNI ABMAC ABNUV ABTAH ABXDB ABXRA ABYKQ ACDAQ ACGFS ACIWK ACNNM ACRLP ADBBV ADEWK ADEZE ADMUD ADTZH AEBSH AECPX AEKER AENEX AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AHPOS AIEXJ AIKHN AITUG AJBFU AJOXV AKURH ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ ASPBG AVWKF AXJTR AZFZN BJAXD BKOJK BLXMC CS3 EBS EFJIC EFLBG EJD ENUVR EO8 EO9 EP2 EP3 FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MAGPM MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG ROL RPZ SDF SDG SES SET SEW SPC SPCBC SSG SSM SST SSZ T5K TN5 WH7 WUQ XPP ZMT ZY4 ~02 ~G- AAXKI AAYXX AFJKZ AKRWK CITATION 7SR 7TB 7U5 8BQ 8FD F28 FR3 JG9 L7M |
ID | FETCH-LOGICAL-c270t-cab5cffbaefa29135a1be84fda1b92bb0920acfadc4fe8a67995fd82b6f64aa63 |
IEDL.DBID | AIKHN |
ISSN | 0301-679X |
IngestDate | Thu Oct 10 18:29:32 EDT 2024 Thu Sep 26 17:42:48 EDT 2024 Fri Feb 23 02:42:12 EST 2024 |
IsPeerReviewed | true |
IsScholarly | true |
Keywords | 25CrNi2MoV steel Discrete laser surface hardening Sliding wear Starved lubrication |
Language | English |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c270t-cab5cffbaefa29135a1be84fda1b92bb0920acfadc4fe8a67995fd82b6f64aa63 |
PQID | 2568703201 |
PQPubID | 2045385 |
ParticipantIDs | proquest_journals_2568703201 crossref_primary_10_1016_j_triboint_2021_107176 elsevier_sciencedirect_doi_10_1016_j_triboint_2021_107176 |
PublicationCentury | 2000 |
PublicationDate | November 2021 2021-11-00 20211101 |
PublicationDateYYYYMMDD | 2021-11-01 |
PublicationDate_xml | – month: 11 year: 2021 text: November 2021 |
PublicationDecade | 2020 |
PublicationPlace | Kidlington |
PublicationPlace_xml | – name: Kidlington |
PublicationTitle | Tribology international |
PublicationYear | 2021 |
Publisher | Elsevier Ltd Elsevier BV |
Publisher_xml | – name: Elsevier Ltd – name: Elsevier BV |
References | Liu, Yan, Shen, Liu, Hu (bib20) 2018; 427 Cheng, Cui, Wang, Han (bib27) 2018; 96 Bijani, Deladi, Rooij, Schipper (bib10) 2018; 6 Liu, Meng, Wen, Yu, Zhou (bib2) 2019; 140 Kostov, Gibmeier, Wanner (bib34) 2017; 239 Han, Zou, Barber, Sun (bib7) 2015; 8 Woodard, Dryden (bib12) 1999; 85 Qu, Hu, Lu, Lai, Liu, Zhang, Li (bib17) 2021 Lawrence, Schmidt, Li (bib18) 2001; 41 Jang, Joo, Mun, Sung, Moon (bib22) 2011; 17 Hu, Lai, Qu, Zhang, Liu, Wu (bib16) 2020; 10 Noordin, Kurniawan, Sharif (bib24) 2007; 1 Sawada, Takeda, Maruyama, Ishii, Yamada, Nagae (bib33) 1999; 267 Lee, Tarng (bib25) 2000; 105 Ebner, Yilmaz, Lohner, Michaelis, Hoehn, Stahl (bib3) 2018; 118 Liu, Guo, Wong (bib5) 2019; 131 Dyson (bib35) 1976; 190 Galda, Sep, Prucnal (bib11) 2016; 99 Zhang, Cui, Zhang, Cheng (bib8) 2018; 120 Kanavin, Smetanin, Isakov, Afanasiev, Chichkov, Wellegehausen (bib40) 1998; 57 Suh (bib37) 1977; 44 Höhn BR, Michaelis K., Otto HP. Flank load carrying capacity and power loss reduction by minimized lubrication. American gear manufacturers association fall technical meeting 2010: 138–152. Wellen, Rabello, Júnior, Fechine, Canedo (bib26) 2015; 25 Kanchanomai, Saengwichian, Manonukul (bib38) 2009; 267 Pantsar, Kujanpää (bib19) 2004; 16 Korotushenko, Grigorkin, Vashchenko, Kuznetsova (bib30) 1979; 21 Zheng, Hu, Li, Dengzhi, Meng, Luo (bib14) 2016; 106 Liu, Liu, Chen, Liu (bib23) 2019 Tan, Ripin (bib1) 2011; 44 Li, Yao, Hu, Gu (bib21) 2014; 77 Cao, Sun, Chen, Cheng, Gao, Xie (bib36) 2017; 115 Tadashi (bib29) 1991; 56–58 Su, Zhou, Zhang, Zhou, Li (bib39) 2018; 98 Wang, Zhang, Men, Li, Liang, Ren (bib9) 2020; 126 Kim, Kim, Park, Han, Jung, Chung (bib4) 2016; 9 Sorgente, Corizzo, Ancona, Scintilla, Palumbo, Tricarico (bib15) 2014; 8963 Zammit, Abela, Betts, Michalczewski, Kalbarczyk, Grech (bib13) 2019; 422–423 Morito, Nishikawa, Maki (bib32) 2003; 43 Telasang, Majumdar, Padmanabham, Manna (bib28) 2014; 599 Lu, Wei, Wang, Sui, Yin (bib31) 2017; 143 Noordin (10.1016/j.triboint.2021.107176_bib24) 2007; 1 Tan (10.1016/j.triboint.2021.107176_bib1) 2011; 44 Kanchanomai (10.1016/j.triboint.2021.107176_bib38) 2009; 267 Galda (10.1016/j.triboint.2021.107176_bib11) 2016; 99 Kostov (10.1016/j.triboint.2021.107176_bib34) 2017; 239 Telasang (10.1016/j.triboint.2021.107176_bib28) 2014; 599 Su (10.1016/j.triboint.2021.107176_bib39) 2018; 98 Qu (10.1016/j.triboint.2021.107176_bib17) 2021 Lee (10.1016/j.triboint.2021.107176_bib25) 2000; 105 Cheng (10.1016/j.triboint.2021.107176_bib27) 2018; 96 Cao (10.1016/j.triboint.2021.107176_bib36) 2017; 115 Liu (10.1016/j.triboint.2021.107176_bib23) 2019 Dyson (10.1016/j.triboint.2021.107176_bib35) 1976; 190 Zhang (10.1016/j.triboint.2021.107176_bib8) 2018; 120 Bijani (10.1016/j.triboint.2021.107176_bib10) 2018; 6 Sawada (10.1016/j.triboint.2021.107176_bib33) 1999; 267 Kanavin (10.1016/j.triboint.2021.107176_bib40) 1998; 57 Han (10.1016/j.triboint.2021.107176_bib7) 2015; 8 Sorgente (10.1016/j.triboint.2021.107176_bib15) 2014; 8963 Liu (10.1016/j.triboint.2021.107176_bib20) 2018; 427 Suh (10.1016/j.triboint.2021.107176_bib37) 1977; 44 10.1016/j.triboint.2021.107176_bib6 Woodard (10.1016/j.triboint.2021.107176_bib12) 1999; 85 Hu (10.1016/j.triboint.2021.107176_bib16) 2020; 10 Zheng (10.1016/j.triboint.2021.107176_bib14) 2016; 106 Liu (10.1016/j.triboint.2021.107176_bib2) 2019; 140 Lawrence (10.1016/j.triboint.2021.107176_bib18) 2001; 41 Ebner (10.1016/j.triboint.2021.107176_bib3) 2018; 118 Wang (10.1016/j.triboint.2021.107176_bib9) 2020; 126 Liu (10.1016/j.triboint.2021.107176_bib5) 2019; 131 Jang (10.1016/j.triboint.2021.107176_bib22) 2011; 17 Korotushenko (10.1016/j.triboint.2021.107176_bib30) 1979; 21 Wellen (10.1016/j.triboint.2021.107176_bib26) 2015; 25 Lu (10.1016/j.triboint.2021.107176_bib31) 2017; 143 Pantsar (10.1016/j.triboint.2021.107176_bib19) 2004; 16 Morito (10.1016/j.triboint.2021.107176_bib32) 2003; 43 Zammit (10.1016/j.triboint.2021.107176_bib13) 2019; 422–423 Li (10.1016/j.triboint.2021.107176_bib21) 2014; 77 Kim (10.1016/j.triboint.2021.107176_bib4) 2016; 9 Tadashi (10.1016/j.triboint.2021.107176_bib29) 1991; 56–58 |
References_xml | – volume: 599 start-page: 255 year: 2014 end-page: 267 ident: bib28 article-title: Structure–property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties publication-title: Mat Sci Eng A Struct contributor: fullname: Manna – volume: 44 start-page: 592 year: 2011 end-page: 602 ident: bib1 article-title: Frictional behavior of piston rings of small utility two-stroke engine under secondary motion of piston publication-title: Tribol Int contributor: fullname: Ripin – volume: 6 start-page: 61 year: 2018 ident: bib10 article-title: The influence of surface texturing on the film thickness in starved lubricated parallel sliding contacts publication-title: Lubricants contributor: fullname: Schipper – volume: 105 start-page: 61 year: 2000 end-page: 66 ident: bib25 article-title: Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations publication-title: J Mater Process Tech contributor: fullname: Tarng – volume: 98 start-page: 281 year: 2018 end-page: 290 ident: bib39 article-title: Effect of distribution of striated laser hardening tracks on dry sliding wear resistance of biomimetic surface publication-title: Opt Laser Technol contributor: fullname: Li – volume: 8963 year: 2014 ident: bib15 article-title: Laser hardening of AISI 52100 bearing steel with a discrete fiber laser spot publication-title: Proc SPIE - Int Soc Opt Eng contributor: fullname: Tricarico – volume: 120 start-page: 226 year: 2018 end-page: 232 ident: bib8 article-title: Micro-porous layer generated during gas nitriding and induction quenching compound treatment affects tribological properties publication-title: Tribol Int contributor: fullname: Cheng – volume: 267 start-page: 19 year: 1999 end-page: 25 ident: bib33 article-title: Effect of W on recovery of lath structure during creep of high chromium martensitic steels publication-title: Mat Sci Eng A Struct contributor: fullname: Nagae – volume: 126 year: 2020 ident: bib9 article-title: Fabrication of nano-TiC functional gradient wear-resistant composite coating on 40Cr gear steel using laser cladding under starved lubrication conditions publication-title: Opt Laser Technol contributor: fullname: Ren – volume: 21 start-page: 407 year: 1979 end-page: 412 ident: bib30 article-title: Kinetics of the massive martensitic transformation in commercial carbon steels publication-title: Met Sci Heat Treat+ contributor: fullname: Kuznetsova – volume: 41 start-page: 967 year: 2001 end-page: 977 ident: bib18 article-title: The forming of mild steel plates with a 2.5 kW high power diode laser publication-title: Int J Mach Tool Man contributor: fullname: Li – volume: 140 year: 2019 ident: bib2 article-title: On the oil-gas-solid mixed bearing between compression ring and cylinder liner under starved lubrication and high boundary pressures publication-title: Tribology Int contributor: fullname: Zhou – volume: 143 start-page: 283 year: 2017 end-page: 287 ident: bib31 article-title: Surface polishing and modification of 3Cr2Mo mold steel by electron beam irradiation publication-title: Vacuum contributor: fullname: Yin – volume: 239 start-page: 326 year: 2017 end-page: 335 ident: bib34 article-title: Spatially resolved temporal stress evolution during laser surface spot hardening of steel publication-title: J Mater Process Tech contributor: fullname: Wanner – volume: 1 start-page: 75 year: 2007 ident: bib24 article-title: Hard turning of stainless steel using wiper coated carbide tool publication-title: Int J Pr Eng contributor: fullname: Sharif – volume: 427 start-page: 857 year: 2018 end-page: 862 ident: bib20 article-title: Friction behaviors of rough chromium surfaces under starving lubrication conditions publication-title: Appl Surf Sci contributor: fullname: Hu – start-page: 146 year: 2019 ident: bib23 article-title: Influence of surface tension on the molten pool morphology in laser melting publication-title: Int J Therm Sci contributor: fullname: Liu – volume: 99 start-page: 77 year: 2016 end-page: 84 ident: bib11 article-title: The effect of dimples geometry in the sliding surface on the tribological properties under starved lubrication conditions publication-title: Tribol Int contributor: fullname: Prucnal – volume: 25 start-page: 296 year: 2015 end-page: 304 ident: bib26 article-title: Melting and crystallization of poly(3-hydroxybutyrate): Effect of heating/cooling rates on phase transformation publication-title: Polimeros contributor: fullname: Canedo – volume: 9 start-page: 719 year: 2016 end-page: 728 ident: bib4 article-title: Effect of engine oil heater using EGR on the fuel economy and NOx emission of a full size sedan during cold start publication-title: SAE Int J Engines contributor: fullname: Chung – volume: 16 start-page: 147 year: 2004 end-page: 153 ident: bib19 article-title: Diode laser beam absorption in laser transformation hardening of low alloy steel publication-title: J Laser Appl contributor: fullname: Kujanpää – volume: 115 start-page: 108 year: 2017 end-page: 115 ident: bib36 article-title: Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel publication-title: Tribol Int contributor: fullname: Xie – volume: 44 start-page: 1 year: 1977 end-page: 16 ident: bib37 article-title: An overview of the delamination theory of wear publication-title: Wear contributor: fullname: Suh – volume: 8 start-page: 21 year: 2015 end-page: 26 ident: bib7 article-title: Effect of surface roughness and lubrication on scuffing for austempered ductile iron (ADI) publication-title: SAE Int J Fuels Lubr contributor: fullname: Sun – volume: 56–58 start-page: 157 year: 1991 end-page: 168 ident: bib29 article-title: Microstructure and mechanical behaviour of ferrous martensite publication-title: Mater Sci Forum contributor: fullname: Tadashi – volume: 77 start-page: 97 year: 2014 end-page: 105 ident: bib21 article-title: Friction and wear performance of laser peen textured surface under starved lubrication publication-title: Tribol Int contributor: fullname: Gu – volume: 190 start-page: 699 year: 1976 end-page: 711 ident: bib35 article-title: The failure of elastohydrodynamic lubrication of circumferentially ground discs publication-title: P I Mech Eng contributor: fullname: Dyson – volume: 57 start-page: 14698 year: 1998 end-page: 14703 ident: bib40 article-title: Heat transport in metals irradiated by ultrashort laser pulses publication-title: Phys Rev B contributor: fullname: Wellegehausen – volume: 131 start-page: 694 year: 2019 end-page: 701 ident: bib5 article-title: Characterisation of starved hydrodynamic lubricating films publication-title: Tribol Int contributor: fullname: Wong – volume: 96 start-page: 1715 year: 2018 end-page: 1724 ident: bib27 article-title: Effect of processing parameters of laser on microstructure and properties of cladding 42CrMo steel publication-title: Int J Adv Manuf Tech contributor: fullname: Han – volume: 17 start-page: 167 year: 2011 end-page: 174 ident: bib22 article-title: Application of direct laser melting to restore damaged steel dies publication-title: Met Mater Int contributor: fullname: Moon – volume: 43 start-page: 1475 year: 2003 end-page: 1477 ident: bib32 article-title: Dislocation density within lath martensite in Fe-C and Fe-Ni alloys publication-title: Isij Int contributor: fullname: Maki – start-page: 142 year: 2021 ident: bib17 article-title: Rolling contact fatigue properties of ultrasonic surface rolling treated 25CrNi2MoV steel under different lubricant viscosities publication-title: Int J Fatigue contributor: fullname: Li – volume: 422–423 start-page: 100 year: 2019 end-page: 107 ident: bib13 article-title: Scuffing and rolling contact fatigue resistance of discrete laser spot hardened austempered ductile iron publication-title: Wear contributor: fullname: Grech – volume: 85 start-page: 2488 year: 1999 end-page: 2496 ident: bib12 article-title: Thermal analysis of a laser pulse for discrete spot surface transformation hardening publication-title: J Appl Phys contributor: fullname: Dryden – volume: 106 start-page: 46 year: 2016 end-page: 54 ident: bib14 article-title: A novel laser surface compositing by selective laser quenching to enhance railway service life publication-title: Tribol Int contributor: fullname: Luo – volume: 10 start-page: 351 year: 2020 ident: bib16 article-title: Effects of microstructure evolution on fretting wear behaviors of 25CrNi2MoVE steel under different tempering states publication-title: Metals contributor: fullname: Wu – volume: 267 start-page: 1665 year: 2009 end-page: 1672 ident: bib38 article-title: Delamination wear of metal injection moulded 316L stainless steel publication-title: Wear contributor: fullname: Manonukul – volume: 118 start-page: 515 year: 2018 end-page: 523 ident: bib3 article-title: On the effect of starved lubrication on elastohydrodynamic (EHL) line contacts publication-title: Tribol Int contributor: fullname: Stahl – volume: 9 start-page: 719 year: 2016 ident: 10.1016/j.triboint.2021.107176_bib4 article-title: Effect of engine oil heater using EGR on the fuel economy and NOx emission of a full size sedan during cold start publication-title: SAE Int J Engines doi: 10.4271/2016-01-0656 contributor: fullname: Kim – volume: 120 start-page: 226 year: 2018 ident: 10.1016/j.triboint.2021.107176_bib8 article-title: Micro-porous layer generated during gas nitriding and induction quenching compound treatment affects tribological properties publication-title: Tribol Int doi: 10.1016/j.triboint.2017.12.028 contributor: fullname: Zhang – volume: 126 year: 2020 ident: 10.1016/j.triboint.2021.107176_bib9 article-title: Fabrication of nano-TiC functional gradient wear-resistant composite coating on 40Cr gear steel using laser cladding under starved lubrication conditions publication-title: Opt Laser Technol doi: 10.1016/j.optlastec.2020.106136 contributor: fullname: Wang – volume: 131 start-page: 694 year: 2019 ident: 10.1016/j.triboint.2021.107176_bib5 article-title: Characterisation of starved hydrodynamic lubricating films publication-title: Tribol Int doi: 10.1016/j.triboint.2018.10.047 contributor: fullname: Liu – ident: 10.1016/j.triboint.2021.107176_bib6 – volume: 21 start-page: 407 issue: 6 year: 1979 ident: 10.1016/j.triboint.2021.107176_bib30 article-title: Kinetics of the massive martensitic transformation in commercial carbon steels publication-title: Met Sci Heat Treat+ doi: 10.1007/BF00780472 contributor: fullname: Korotushenko – volume: 422–423 start-page: 100 year: 2019 ident: 10.1016/j.triboint.2021.107176_bib13 article-title: Scuffing and rolling contact fatigue resistance of discrete laser spot hardened austempered ductile iron publication-title: Wear doi: 10.1016/j.wear.2019.01.061 contributor: fullname: Zammit – volume: 143 start-page: 283 year: 2017 ident: 10.1016/j.triboint.2021.107176_bib31 article-title: Surface polishing and modification of 3Cr2Mo mold steel by electron beam irradiation publication-title: Vacuum doi: 10.1016/j.vacuum.2017.06.010 contributor: fullname: Lu – volume: 140 year: 2019 ident: 10.1016/j.triboint.2021.107176_bib2 article-title: On the oil-gas-solid mixed bearing between compression ring and cylinder liner under starved lubrication and high boundary pressures publication-title: Tribology Int doi: 10.1016/j.triboint.2019.105869 contributor: fullname: Liu – volume: 57 start-page: 14698 issue: 23 year: 1998 ident: 10.1016/j.triboint.2021.107176_bib40 article-title: Heat transport in metals irradiated by ultrashort laser pulses publication-title: Phys Rev B doi: 10.1103/PhysRevB.57.14698 contributor: fullname: Kanavin – volume: 17 start-page: 167 issue: 1 year: 2011 ident: 10.1016/j.triboint.2021.107176_bib22 article-title: Application of direct laser melting to restore damaged steel dies publication-title: Met Mater Int doi: 10.1007/s12540-011-0223-z contributor: fullname: Jang – volume: 106 start-page: 46 year: 2016 ident: 10.1016/j.triboint.2021.107176_bib14 article-title: A novel laser surface compositing by selective laser quenching to enhance railway service life publication-title: Tribol Int doi: 10.1016/j.triboint.2016.09.020 contributor: fullname: Zheng – volume: 25 start-page: 296 issue: 3 year: 2015 ident: 10.1016/j.triboint.2021.107176_bib26 article-title: Melting and crystallization of poly(3-hydroxybutyrate): Effect of heating/cooling rates on phase transformation publication-title: Polimeros doi: 10.1590/0104-1428.1961 contributor: fullname: Wellen – volume: 98 start-page: 281 year: 2018 ident: 10.1016/j.triboint.2021.107176_bib39 article-title: Effect of distribution of striated laser hardening tracks on dry sliding wear resistance of biomimetic surface publication-title: Opt Laser Technol doi: 10.1016/j.optlastec.2017.08.007 contributor: fullname: Su – start-page: 142 year: 2021 ident: 10.1016/j.triboint.2021.107176_bib17 article-title: Rolling contact fatigue properties of ultrasonic surface rolling treated 25CrNi2MoV steel under different lubricant viscosities publication-title: Int J Fatigue contributor: fullname: Qu – volume: 190 start-page: 699 issue: 1 year: 1976 ident: 10.1016/j.triboint.2021.107176_bib35 article-title: The failure of elastohydrodynamic lubrication of circumferentially ground discs publication-title: P I Mech Eng contributor: fullname: Dyson – volume: 267 start-page: 1665 issue: 9 year: 2009 ident: 10.1016/j.triboint.2021.107176_bib38 article-title: Delamination wear of metal injection moulded 316L stainless steel publication-title: Wear doi: 10.1016/j.wear.2009.06.019 contributor: fullname: Kanchanomai – volume: 43 start-page: 1475 issue: 9 year: 2003 ident: 10.1016/j.triboint.2021.107176_bib32 article-title: Dislocation density within lath martensite in Fe-C and Fe-Ni alloys publication-title: Isij Int doi: 10.2355/isijinternational.43.1475 contributor: fullname: Morito – volume: 6 start-page: 61 year: 2018 ident: 10.1016/j.triboint.2021.107176_bib10 article-title: The influence of surface texturing on the film thickness in starved lubricated parallel sliding contacts publication-title: Lubricants doi: 10.3390/lubricants6030061 contributor: fullname: Bijani – volume: 8 start-page: 21 year: 2015 ident: 10.1016/j.triboint.2021.107176_bib7 article-title: Effect of surface roughness and lubrication on scuffing for austempered ductile iron (ADI) publication-title: SAE Int J Fuels Lubr doi: 10.4271/2015-01-0683 contributor: fullname: Han – volume: 16 start-page: 147 issue: 3 year: 2004 ident: 10.1016/j.triboint.2021.107176_bib19 article-title: Diode laser beam absorption in laser transformation hardening of low alloy steel publication-title: J Laser Appl doi: 10.2351/1.1710879 contributor: fullname: Pantsar – volume: 85 start-page: 2488 year: 1999 ident: 10.1016/j.triboint.2021.107176_bib12 article-title: Thermal analysis of a laser pulse for discrete spot surface transformation hardening publication-title: J Appl Phys doi: 10.1063/1.369610 contributor: fullname: Woodard – volume: 41 start-page: 967 issue: 7 year: 2001 ident: 10.1016/j.triboint.2021.107176_bib18 article-title: The forming of mild steel plates with a 2.5 kW high power diode laser publication-title: Int J Mach Tool Man doi: 10.1016/S0890-6955(00)00117-6 contributor: fullname: Lawrence – volume: 239 start-page: 326 year: 2017 ident: 10.1016/j.triboint.2021.107176_bib34 article-title: Spatially resolved temporal stress evolution during laser surface spot hardening of steel publication-title: J Mater Process Tech doi: 10.1016/j.jmatprotec.2016.08.035 contributor: fullname: Kostov – volume: 599 start-page: 255 year: 2014 ident: 10.1016/j.triboint.2021.107176_bib28 article-title: Structure–property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties publication-title: Mat Sci Eng A Struct doi: 10.1016/j.msea.2014.01.083 contributor: fullname: Telasang – volume: 99 start-page: 77 year: 2016 ident: 10.1016/j.triboint.2021.107176_bib11 article-title: The effect of dimples geometry in the sliding surface on the tribological properties under starved lubrication conditions publication-title: Tribol Int doi: 10.1016/j.triboint.2016.03.015 contributor: fullname: Galda – volume: 427 start-page: 857 year: 2018 ident: 10.1016/j.triboint.2021.107176_bib20 article-title: Friction behaviors of rough chromium surfaces under starving lubrication conditions publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2017.09.009 contributor: fullname: Liu – volume: 77 start-page: 97 year: 2014 ident: 10.1016/j.triboint.2021.107176_bib21 article-title: Friction and wear performance of laser peen textured surface under starved lubrication publication-title: Tribol Int doi: 10.1016/j.triboint.2014.04.017 contributor: fullname: Li – volume: 44 start-page: 1 issue: 1 year: 1977 ident: 10.1016/j.triboint.2021.107176_bib37 article-title: An overview of the delamination theory of wear publication-title: Wear doi: 10.1016/0043-1648(77)90081-3 contributor: fullname: Suh – volume: 267 start-page: 19 issue: 1 year: 1999 ident: 10.1016/j.triboint.2021.107176_bib33 article-title: Effect of W on recovery of lath structure during creep of high chromium martensitic steels publication-title: Mat Sci Eng A Struct doi: 10.1016/S0921-5093(99)00066-0 contributor: fullname: Sawada – volume: 118 start-page: 515 year: 2018 ident: 10.1016/j.triboint.2021.107176_bib3 article-title: On the effect of starved lubrication on elastohydrodynamic (EHL) line contacts publication-title: Tribol Int doi: 10.1016/j.triboint.2017.06.004 contributor: fullname: Ebner – volume: 96 start-page: 1715 issue: 5 year: 2018 ident: 10.1016/j.triboint.2021.107176_bib27 article-title: Effect of processing parameters of laser on microstructure and properties of cladding 42CrMo steel publication-title: Int J Adv Manuf Tech doi: 10.1007/s00170-017-0920-y contributor: fullname: Cheng – volume: 1 start-page: 75 issue: 1 year: 2007 ident: 10.1016/j.triboint.2021.107176_bib24 article-title: Hard turning of stainless steel using wiper coated carbide tool publication-title: Int J Pr Eng contributor: fullname: Noordin – volume: 105 start-page: 61 issue: 1 year: 2000 ident: 10.1016/j.triboint.2021.107176_bib25 article-title: Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations publication-title: J Mater Process Tech doi: 10.1016/S0924-0136(00)00582-3 contributor: fullname: Lee – start-page: 146 year: 2019 ident: 10.1016/j.triboint.2021.107176_bib23 article-title: Influence of surface tension on the molten pool morphology in laser melting publication-title: Int J Therm Sci contributor: fullname: Liu – volume: 44 start-page: 592 issue: 5 year: 2011 ident: 10.1016/j.triboint.2021.107176_bib1 article-title: Frictional behavior of piston rings of small utility two-stroke engine under secondary motion of piston publication-title: Tribol Int doi: 10.1016/j.triboint.2010.12.009 contributor: fullname: Tan – volume: 8963 year: 2014 ident: 10.1016/j.triboint.2021.107176_bib15 article-title: Laser hardening of AISI 52100 bearing steel with a discrete fiber laser spot publication-title: Proc SPIE - Int Soc Opt Eng contributor: fullname: Sorgente – volume: 10 start-page: 351 year: 2020 ident: 10.1016/j.triboint.2021.107176_bib16 article-title: Effects of microstructure evolution on fretting wear behaviors of 25CrNi2MoVE steel under different tempering states publication-title: Metals doi: 10.3390/met10030351 contributor: fullname: Hu – volume: 56–58 start-page: 157 year: 1991 ident: 10.1016/j.triboint.2021.107176_bib29 article-title: Microstructure and mechanical behaviour of ferrous martensite publication-title: Mater Sci Forum contributor: fullname: Tadashi – volume: 115 start-page: 108 year: 2017 ident: 10.1016/j.triboint.2021.107176_bib36 article-title: Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel publication-title: Tribol Int doi: 10.1016/j.triboint.2017.05.028 contributor: fullname: Cao |
SSID | ssj0007497 |
Score | 2.4443715 |
Snippet | The discrete laser surface hardening (DLSH) parameters of 25CrNi2MoV steel were synthetically optimized and employed to enhance the surface sliding wear... |
SourceID | proquest crossref elsevier |
SourceType | Aggregation Database Publisher |
StartPage | 107176 |
SubjectTerms | 25CrNi2MoV steel Coefficient of friction Compressive properties Dimpling Discrete laser surface hardening Frictional wear Laser beam hardening Lasers Lubrication Nickel chromium molybdenum steels Optimization Parameters Scuffing Sliding friction Sliding wear Starved lubrication Substrates Surface hardening Surface properties Wear mechanisms Wear resistance |
Title | Investigation on the parameters optimization and sliding wear behaviors under starved lubrication of discrete laser surface hardened 25CrNi2MoV steel |
URI | https://dx.doi.org/10.1016/j.triboint.2021.107176 https://www.proquest.com/docview/2568703201 |
Volume | 163 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1La9wwEB6SzSU9lD5pmgc69OqsLcuyfQxLw6Yle2lT9ib0hA2JHby77S3_Iv83M2s5bAqhh4LBWEjCaKRvPon5RgBf6uCkL6ROrJE2ESHgmuM2JGVldOpC0I6T3vlyJqdX4tu8mO_AZNDCUFhlxP4e0zdoHUvGcTTHd4vF-AeReVnWc9y0pEgLql3YQ3ckxAj2zi6-T2dPgFyKzR0rVD-hBltC4etTuleqXTQUVskzLMTtjXzJR_2F1hsXdP4GXkfuyM7633sLO755B6-2Mgq-h4etvBltw_BBgscov_ctxb0sWYsQcRu1l0w3jiHPJPfF_uCUZ4Nof8lIW9YxpI7db-_Yzdp08XCPtYGRlLfD_hhSb6q17oK2npGAC6HTMV5MutmCX7a_sAfvbz7A1fnXn5NpEm9eSCwv01VitSlsCEb7oHmd5YXOjK9EcPiuuTFpzVNt0ZBWBF9pSVnlgqu4kUEKrWX-EUZN2_hPwJAgmZpkKNzkwuWZCTq3UiMU2OAKWx7AeBhrddcn2FBD5Nm1GqyjyDqqt84B1INJ1LOpotAL_LPt0WBDFRfrUiHrQ9TKkQp9_o-uD2Gfvnqd4hGMVt3aHyNhWZkT2D29z07itHwEvXzx0g |
link.rule.ids | 315,786,790,4521,24144,27955,27956,45618,45712 |
linkProvider | Elsevier |
linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1NT9tAEF1ReqA9oLZQQaFlDlxNnLW9to9VBEoLyQWoclvt10hBYCMnaW_9F_2_nYltESpVPVSyZGm9Xlk7u2_eWvNmhDgt0auQKRM5q1yUItKekw6jvLAm9ojGS9Y7T6ZqfJt-nWWzLTHqtTAcVtlhf4vpa7TuWgbdbA4e5_PBNZN5lZczOrTERAuKF-IlswGO6zr7-RTnkafrCivcO-LuGzLhuzOuKlXPKw6qlENqpMON-puH-gOr1w7o4o3Y7ZgjfG4_7q3YCtU78Xojn-Ce-LWRNaOugC6id8DZvR846mUBNQHEQ6e8BFN5IJbJzgt-0IKHXrK_AFaWNUDEsfkePNyvbNP92oMagYW8DY0HRLy516pB4wKwfIuA04PMRs10Lif1NxohhPt9cXtxfjMaR13dhcjJPF5GztjMIVoT0MhymGRmaEORoqd7Ka2NSxkbR2Z0KYbCKM4ph76QVqFKjVHJe7Fd1VU4EED0yJYsQpE2SX0ytGgSpwwBgUOfufxQDPq51o9teg3dx53d6d46mq2jW-scirI3iX62UDT5gH--e9zbUHdbdaGJ8xFmJUSEPvzH0CdiZ3wzudJXX6aXR-IVP2kVi8die9mswkeiLkv7ab00fwPtY_Kn |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Investigation+on+the+parameters+optimization+and+sliding+wear+behaviors+under+starved+lubrication+of+discrete+laser+surface+hardened+25CrNi2MoV+steel&rft.jtitle=Tribology+international&rft.au=Hu%2C+Xiongfeng&rft.au=Jia%2C+Siyu&rft.au=Lai%2C+Fuqiang&rft.au=Jiang%2C+Li&rft.date=2021-11-01&rft.issn=0301-679X&rft.volume=163&rft.spage=107176&rft_id=info:doi/10.1016%2Fj.triboint.2021.107176&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_triboint_2021_107176 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0301-679X&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0301-679X&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0301-679X&client=summon |