Type synthesis of serial kinematic chains with screw type terminal constraints based on an adding joint method
•The type synthesis of SKCs with terminal screw type constraints is investigated.•The adding joint method for designing SKCs with terminal screw type constraints is proposed.•Varied 4 and 5 DOF SKCs with terminal screw type constraints are derived. Serial kinematic chains(SKCs) with screw type termi...
Saved in:
| Published in | Mechanism and machine theory Vol. 184; p. 105277 |
|---|---|
| Main Authors | , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier Ltd
01.06.2023
|
| Subjects | |
| Online Access | Get full text |
| ISSN | 0094-114X |
| DOI | 10.1016/j.mechmachtheory.2023.105277 |
Cover
| Abstract | •The type synthesis of SKCs with terminal screw type constraints is investigated.•The adding joint method for designing SKCs with terminal screw type constraints is proposed.•Varied 4 and 5 DOF SKCs with terminal screw type constraints are derived.
Serial kinematic chains(SKCs) with screw type terminal constraints are ubiquitous. However, the type synthesis of such mechanisms has not been systematically studied. Unlike the SKCs which only have pure constraint forces and torques, these kinds of SKCs contain independent screw type terminal constraints with non-zero pitch. This paper develops a systematic work for the type synthesis of general SKCs with terminal screw type constraints. In this paper, combined with the screw theory and the atlas method, the principle and steps for synthesizing SKCs based on an adding joint method are proposed. To derive feasible SKCs with terminal screw type constraints, the concept of constraint-kinematic identification graph(CKIG) is proposed and used to identify the screw type constraints in SKCs. Based on the proposed approach, varied 4R, 3R1P and 2R2P SKCs with 1F1H and 1C1H type terminal constraints and numerous 5R, 4R1P and 3R2P SKCs with 1H type terminal constraint are obtained. In addition, some examples for constructing novel parallel mechanisms(PMs) using the derived SKC with screw type terminal constraints are given. This paper provides an effective method for the type synthesis of SKCs with screw type terminal constraints. |
|---|---|
| AbstractList | •The type synthesis of SKCs with terminal screw type constraints is investigated.•The adding joint method for designing SKCs with terminal screw type constraints is proposed.•Varied 4 and 5 DOF SKCs with terminal screw type constraints are derived.
Serial kinematic chains(SKCs) with screw type terminal constraints are ubiquitous. However, the type synthesis of such mechanisms has not been systematically studied. Unlike the SKCs which only have pure constraint forces and torques, these kinds of SKCs contain independent screw type terminal constraints with non-zero pitch. This paper develops a systematic work for the type synthesis of general SKCs with terminal screw type constraints. In this paper, combined with the screw theory and the atlas method, the principle and steps for synthesizing SKCs based on an adding joint method are proposed. To derive feasible SKCs with terminal screw type constraints, the concept of constraint-kinematic identification graph(CKIG) is proposed and used to identify the screw type constraints in SKCs. Based on the proposed approach, varied 4R, 3R1P and 2R2P SKCs with 1F1H and 1C1H type terminal constraints and numerous 5R, 4R1P and 3R2P SKCs with 1H type terminal constraint are obtained. In addition, some examples for constructing novel parallel mechanisms(PMs) using the derived SKC with screw type terminal constraints are given. This paper provides an effective method for the type synthesis of SKCs with screw type terminal constraints. |
| ArticleNumber | 105277 |
| Author | Hu, Bo Bai, Peng |
| Author_xml | – sequence: 1 givenname: Bo orcidid: 0000-0003-2184-1848 surname: Hu fullname: Hu, Bo email: hubo@ysu.edu.cn organization: Parallel robot and mechatronic system laboratory of Hebei province, Yanshan University, Qinhuangdao, Hebei, 066004, China – sequence: 2 givenname: Peng surname: Bai fullname: Bai, Peng organization: Parallel robot and mechatronic system laboratory of Hebei province, Yanshan University, Qinhuangdao, Hebei, 066004, China |
| BookMark | eNqNkE1LAzEQhnOoYKv-hxy8bk02-xXwosWqUPBSwVtIsxM3azcpSbDsvzdLveipMDAw7wfMs0Az6ywgdEvJkhJa3fXLAVQ3SNXFDpwflznJWZLKvK5naE4ILzJKi49LtAihJ4TUZcHmyG7HA-Aw2pQKJmCncQBv5B5_GQuDjEZh1UljAz6a2OGgPBxxnEIR_GBscipnQ_TJEwPeyQAtdhbLNG1r7CfuXVLwALFz7TW60HIf4OZ3X6H39dN29ZJt3p5fVw-bTOUViRmUNdWcAte8aqTWlJN0YqoomeZFwduqkjXkpGrqcicpl4xCviuBFTXRpGnYFbo_9SrvQvCgxcGbQfpRUCImXqIXf3mJiZc48Urxx39xZWJi4ez05_7ckvWpBNKj3wa8CMqAVdAaDyqK1pnzin4ArK-Zrg |
| CitedBy_id | crossref_primary_10_1016_j_mechmachtheory_2025_105954 crossref_primary_10_3390_app15073572 crossref_primary_10_3390_robotics12040098 crossref_primary_10_1007_s12206_023_1138_6 crossref_primary_10_1016_j_mechmachtheory_2023_105519 crossref_primary_10_3390_machines12090658 |
| Cites_doi | 10.1016/j.mechmachtheory.2009.06.001 10.1016/j.mechmachtheory.2017.07.014 10.1017/S0263574708004542 10.1115/1.4004123 10.1115/1.4025219 10.1016/j.euromechsol.2005.02.004 10.1016/j.precisioneng.2009.06.008 10.1109/TRO.2008.2008737 10.1016/j.mechmachtheory.2014.02.007 10.1016/j.mechmachtheory.2021.104656 10.1016/j.mechmachtheory.2014.03.008 10.1016/j.mechmachtheory.2017.11.009 10.1017/S0263574714000551 10.1016/j.mechmachtheory.2018.05.014 10.1016/j.mechmachtheory.2021.104597 10.1016/j.mechmachtheory.2016.11.005 10.1177/02783640122067426 10.1016/0094-114X(78)90017-4 10.1186/s10033-020-00487-7 10.1016/j.mechmachtheory.2016.10.003 10.1177/027836402760475342 10.1115/1.2717228 10.1016/j.euromechsol.2006.06.001 10.1177/0278364902021009314 10.1016/j.mechmachtheory.2019.103695 10.1016/S0094-114X(98)00051-2 10.1177/027836498900800504 10.1016/S0094-114X(02)00044-7 10.1016/j.precisioneng.2011.04.006 10.3901/CJME.2013.06.1073 10.1007/s11431-010-4239-2 10.1016/j.precisioneng.2009.06.007 10.1016/j.rcim.2013.07.002 10.1115/1.4002697 10.1016/j.mechmachtheory.2018.06.017 |
| ContentType | Journal Article |
| Copyright | 2023 Elsevier Ltd |
| Copyright_xml | – notice: 2023 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.mechmachtheory.2023.105277 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| ExternalDocumentID | 10_1016_j_mechmachtheory_2023_105277 S0094114X23000514 |
| GroupedDBID | --K --M -~X .~1 0R~ 1B1 1~. 1~5 29M 4.4 457 4G. 5GY 5VS 7-5 71M 8P~ 9JN AACTN AAEDT AAEDW AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AATTM AAXKI AAXUO ABFNM ABJNI ABMAC ABTAH ABWVN ABXDB ACDAQ ACGFS ACNNM ACRLP ACRPL ADBBV ADEZE ADMUD ADNMO ADTZH AEBSH AECPX AEIPS AEKER AENEX AFFNX AFJKZ AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AKRWK ALMA_UNASSIGNED_HOLDINGS AMRAJ ANKPU ASPBG AVWKF AXJTR AZFZN BKOJK BLXMC BNPGV CS3 EBS EFJIC EJD EO8 EO9 EP2 EP3 FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG ROL RPZ SDF SDG SES SET SEW SPCBC SST SSZ T5K T9H TN5 TWZ WUQ XPP ZMT ZY4 ~G- AAYWO AAYXX ACVFH ADCNI AEUPX AFPUW AFXIZ AGCQF AGQPQ AGRNS AIGII AIIUN AKBMS AKYEP APXCP BJAXD CITATION SPC SSH |
| ID | FETCH-LOGICAL-c260t-e571f91e9f968aff190e573c453f9449d66a7e206875ba19a31e2b5e3470f0883 |
| IEDL.DBID | AIKHN |
| ISSN | 0094-114X |
| IngestDate | Tue Jul 01 01:48:41 EDT 2025 Thu Apr 24 23:04:06 EDT 2025 Sun Apr 06 06:56:25 EDT 2025 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Screw type terminal constraint Constraint-kinematic identification graph Atlas method Serial kinematic chain |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c260t-e571f91e9f968aff190e573c453f9449d66a7e206875ba19a31e2b5e3470f0883 |
| ORCID | 0000-0003-2184-1848 |
| ParticipantIDs | crossref_primary_10_1016_j_mechmachtheory_2023_105277 crossref_citationtrail_10_1016_j_mechmachtheory_2023_105277 elsevier_sciencedirect_doi_10_1016_j_mechmachtheory_2023_105277 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | June 2023 2023-06-00 |
| PublicationDateYYYYMMDD | 2023-06-01 |
| PublicationDate_xml | – month: 06 year: 2023 text: June 2023 |
| PublicationDecade | 2020 |
| PublicationTitle | Mechanism and machine theory |
| PublicationYear | 2023 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | B.landing (bib0030) 1999 Zhang, Huang, Mei, Li (bib0040) 2022; 169 H.opkins, C.ulpepper (bib0031) 2010; 34 Kong, Gosselin (bib0025) 2007 S.ong, Han, W.ang (bib0020) 2018; 121 Monsarrat, Gosselin (bib0045) 2001; 20 H.opkins, Culpepper (bib0033) 2011; 35 Kumar, Piccin, Bayle (bib0041) 2014; 77 Li, H.erve (bib0006) 2009; 25 X.ie, L.iu, Wang (bib0037) 2015; 33 D.ai (bib0043) 2014 H.ervé (bib0003) 1978; 13 Gao, Yang, G.e (bib0015) 2011; 3 Tian, Fang, G.e (bib0028) 2017; 118 Gogu (bib0010) 2009; 27 Y.ang (bib0011) 2004 Y.ang, L.iu, Jin, L.uo, S.hen, H.ang (bib0012) 2009; 131 Li, Fang (bib0029) 2020; 145 Gao, L.i, Z.hao, J.in, Zhao (bib0013) 2002; 37 Kong, Gosselin, Richard (bib0024) 2007; 129 Xie, Li, Liu (bib0038) 2013; 6 F.ang, T.sai (bib0027) 2002; 21 Sun, H.uo (bib0016) 2018; 128 Meng, Gao, Wu, Ge (bib0014) 2014; 78 H.ervé (bib0004) 1999; 34 M.erlet (bib0002) 2000 Huang, Li (bib0022) 2003; 22 H.opkins, C.ulpepper (bib0032) 2010; 34 J.ia, H.uang, Li, W.u, C.ao, G.uo (bib0019) 2018; 128 Y.ang, Sun, Huang (bib0018) 2017; 109 X.ie, L.iu, You (bib0036) 2014; 30 Merlet (bib0044) 1989; 8 Gogu (bib0008) 2005; 24 Sun, Y.ang, Huang, D.ai (bib0017) 2017; 108 Kong (bib0026) 2013; 5 Yu, Li, Su, C.ulpepper (bib0034) 2011; 3 Huang, L.i, D.ing (bib0001) 2012 Y.u, Pei, Z.ong (bib0035) 2014 Lin, Guo (bib0042) 2022; 168 Huang, L.i (bib0021) 2002; 21 Meng, L.iu, L.i (bib0007) 2007; 23 Zeng, Huang (bib0023) 2011; 54 L.ee, H.ervé (bib0005) 2009; 44 Gogu (bib0009) 2007; 26 L.i, Zhang, Zhang (bib0039) 2020; 33 Li (10.1016/j.mechmachtheory.2023.105277_bib0006) 2009; 25 L.i (10.1016/j.mechmachtheory.2023.105277_bib0039) 2020; 33 Sun (10.1016/j.mechmachtheory.2023.105277_bib0017) 2017; 108 Gogu (10.1016/j.mechmachtheory.2023.105277_bib0009) 2007; 26 Kong (10.1016/j.mechmachtheory.2023.105277_bib0024) 2007; 129 Sun (10.1016/j.mechmachtheory.2023.105277_bib0016) 2018; 128 D.ai (10.1016/j.mechmachtheory.2023.105277_bib0043) 2014 H.ervé (10.1016/j.mechmachtheory.2023.105277_bib0003) 1978; 13 Y.u (10.1016/j.mechmachtheory.2023.105277_bib0035) 2014 Xie (10.1016/j.mechmachtheory.2023.105277_bib0038) 2013; 6 H.ervé (10.1016/j.mechmachtheory.2023.105277_bib0004) 1999; 34 Yu (10.1016/j.mechmachtheory.2023.105277_bib0034) 2011; 3 Meng (10.1016/j.mechmachtheory.2023.105277_bib0007) 2007; 23 Gogu (10.1016/j.mechmachtheory.2023.105277_bib0010) 2009; 27 H.opkins (10.1016/j.mechmachtheory.2023.105277_bib0032) 2010; 34 H.opkins (10.1016/j.mechmachtheory.2023.105277_bib0033) 2011; 35 Tian (10.1016/j.mechmachtheory.2023.105277_bib0028) 2017; 118 Kong (10.1016/j.mechmachtheory.2023.105277_bib0026) 2013; 5 Y.ang (10.1016/j.mechmachtheory.2023.105277_bib0011) 2004 Monsarrat (10.1016/j.mechmachtheory.2023.105277_bib0045) 2001; 20 Meng (10.1016/j.mechmachtheory.2023.105277_bib0014) 2014; 78 B.landing (10.1016/j.mechmachtheory.2023.105277_bib0030) 1999 L.ee (10.1016/j.mechmachtheory.2023.105277_bib0005) 2009; 44 X.ie (10.1016/j.mechmachtheory.2023.105277_bib0036) 2014; 30 J.ia (10.1016/j.mechmachtheory.2023.105277_bib0019) 2018; 128 Huang (10.1016/j.mechmachtheory.2023.105277_bib0022) 2003; 22 Gao (10.1016/j.mechmachtheory.2023.105277_bib0013) 2002; 37 Kumar (10.1016/j.mechmachtheory.2023.105277_bib0041) 2014; 77 Y.ang (10.1016/j.mechmachtheory.2023.105277_bib0012) 2009; 131 X.ie (10.1016/j.mechmachtheory.2023.105277_bib0037) 2015; 33 Gogu (10.1016/j.mechmachtheory.2023.105277_bib0008) 2005; 24 Kong (10.1016/j.mechmachtheory.2023.105277_bib0025) 2007 M.erlet (10.1016/j.mechmachtheory.2023.105277_bib0002) 2000 Gao (10.1016/j.mechmachtheory.2023.105277_bib0015) 2011; 3 Huang (10.1016/j.mechmachtheory.2023.105277_bib0021) 2002; 21 F.ang (10.1016/j.mechmachtheory.2023.105277_bib0027) 2002; 21 Li (10.1016/j.mechmachtheory.2023.105277_bib0029) 2020; 145 Zeng (10.1016/j.mechmachtheory.2023.105277_bib0023) 2011; 54 S.ong (10.1016/j.mechmachtheory.2023.105277_bib0020) 2018; 121 Zhang (10.1016/j.mechmachtheory.2023.105277_bib0040) 2022; 169 Merlet (10.1016/j.mechmachtheory.2023.105277_bib0044) 1989; 8 Y.ang (10.1016/j.mechmachtheory.2023.105277_bib0018) 2017; 109 Lin (10.1016/j.mechmachtheory.2023.105277_bib0042) 2022; 168 Huang (10.1016/j.mechmachtheory.2023.105277_bib0001) 2012 H.opkins (10.1016/j.mechmachtheory.2023.105277_bib0031) 2010; 34 |
| References_xml | – volume: 13 start-page: 437 year: 1978 end-page: 450 ident: bib0003 article-title: Analyse structurelle des mécanismes par groupe des déplacements publication-title: Mech. Mach. Theory – volume: 23 start-page: 623 year: 2007 end-page: 649 ident: bib0007 article-title: A geometric theory for analysis and synthesis of sub-6 DoF parallel manipulators publication-title: IEEE Transact. Robot. – year: 2004 ident: bib0011 article-title: Topology Structure Design of Robot Mechanisms – volume: 34 start-page: 271 year: 2010 end-page: 278 ident: bib0032 article-title: Synthesis ofmulti-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT)—Part II: practice publication-title: Precis. Eng. – volume: 21 start-page: 131 year: 2002 end-page: 145 ident: bib0021 article-title: General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators publication-title: Int. J. Rob. Res. – volume: 3 year: 2011 ident: bib0034 article-title: Screw theory based methodology for the deterministic type synthesis of flexure mechanisms publication-title: J. Mech. Robot. – volume: 128 start-page: 412 year: 2018 end-page: 428 ident: bib0016 article-title: Type synthesis of 1T2R parallel mechanisms with parasitic motions publication-title: Mech. Mach. Theory – year: 1999 ident: bib0030 article-title: Exact constraint: Machine Design Using Kinematic Principles – volume: 121 start-page: 475 year: 2018 end-page: 486 ident: bib0020 article-title: Type synthesis of 1T2R and 2R1T parallel mechanisms employing conformal geometric algebra publication-title: Mech. Mach. Theory – volume: 129 start-page: 595 year: 2007 end-page: 601 ident: bib0024 article-title: Type synthesis of parallel mechanisms with multiple operation modes publication-title: ASME J. Mech. Des. – year: 2012 ident: bib0001 article-title: Theory of Parallel Mechanisms – volume: 131 year: 2009 ident: bib0012 article-title: Position and orientation characteristic equation for topological design of robot mechanisms publication-title: ASME J. Mech. Des. – volume: 44 start-page: 1980 year: 2009 end-page: 1997 ident: bib0005 article-title: Type synthesis of primitive Schoenflies-motion generators publication-title: Mech. Mach. Theory – volume: 128 start-page: 544 year: 2018 end-page: 559 ident: bib0019 article-title: Synthesis of a novel type of metamorphic mechanism module for large scale deployable grasping manipulators publication-title: Mech. Mach. Theory – volume: 25 start-page: 158 year: 2009 end-page: 164 ident: bib0006 article-title: Parallel mechanisms with bifurcation of schoenflies motion publication-title: IEEE Transact. Robot. – volume: 37 start-page: 1395 year: 2002 end-page: 1411 ident: bib0013 article-title: New kinematic structures for 2-, 3-, 4-, and 5-DOF parallel manipulator designs publication-title: Mech. Mach. Theory – volume: 24 start-page: 690 year: 2005 end-page: 711 ident: bib0008 article-title: Mobility and spatiality of parallel robots revisited via theory of linear transformations publication-title: Eur. J. Mech. A/Solid. – volume: 33 start-page: 78 year: 2020 ident: bib0039 article-title: A new method for type synthesis of 2R1T and 2T1R 3-DOF redundant actuated parallel mechanisms with closed loop units publication-title: Chin. J. Mech. Eng. – volume: 54 start-page: 998 year: 2011 end-page: 1004 ident: bib0023 article-title: Type synthesis of the rotational decoupled parallel mechanism based on screw theory publication-title: Sci. China-Technolog. Sci. – volume: 5 year: 2013 ident: bib0026 article-title: Type Synthesis of 3-DOF parallel manipulators with both a planar operation mode and a spatial translational operation mode publication-title: J. Mech. Robot. – volume: 169 year: 2022 ident: bib0040 article-title: Type synthesis of single-loop deployable mechanisms based on improved atlas method for single-DOF grasping manipulators publication-title: Mech. Mach. Theory – volume: 34 start-page: 259 year: 2010 end-page: 270 ident: bib0031 article-title: Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT)—Part I: principles publication-title: Precis. Eng. – volume: 118 start-page: 84 year: 2017 end-page: 99 ident: bib0028 article-title: Structural synthesis of parallel manipulators with coupling sub-chains publication-title: Mech. Mach. Theory – volume: 3 year: 2011 ident: bib0015 article-title: Type synthesis of parallel mechanisms having the second class GF sets and two dimensional rotations publication-title: J. Mech. Robot. – volume: 145 year: 2020 ident: bib0029 article-title: Type synthesis of a class of novel 3-DOF single-loop parallel leg mechanisms for walking robots publication-title: Mech. Mach. Theory – volume: 168 year: 2022 ident: bib0042 article-title: Type synthesis of reconfiguration parallel mechanisms transforming between trusses and mechanisms based on friction self-locking composite joints publication-title: Mech. Mach. Theory – year: 2014 ident: bib0043 article-title: Geometrical Foundations and Screw Algebra For Mechanisms and Robotics – volume: 77 start-page: 59 year: 2014 end-page: 72 ident: bib0041 article-title: A task-based type synthesis of novel 2T2R parallel mechanisms publication-title: Mech. Mach. Theory – volume: 22 start-page: 59 year: 2003 end-page: 79 ident: bib0022 article-title: Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method publication-title: Int. J. Rob. Res. – volume: 20 start-page: 312 year: 2001 end-page: 326 ident: bib0045 article-title: Singularity analysis of a three-leg six-degree-of-freedom parallel platform mechanism based on Grassmann Line Geometry publication-title: Int. J. Robot. Res. – volume: 109 start-page: 220 year: 2017 end-page: 230 ident: bib0018 article-title: Type synthesis of parallel mechanisms having 3T1R motion with variable rotational axis publication-title: Mech. Mach. Theory – volume: 21 start-page: 799 year: 2002 end-page: 810 ident: bib0027 article-title: Structure synthesis of a class of 4-DoF and 5-DoF parallel manipulators with identical limb structures publication-title: Int. J. Rob. Res. – volume: 26 start-page: 242 year: 2007 end-page: 269 ident: bib0009 article-title: Structural synthesis of fully-isotropic parallel robots with Schonflies motions via theory of linear transformations and evolutionary morphology publication-title: Eur. J. Mech. A-Solid. – volume: 33 start-page: 622 year: 2015 end-page: 637 ident: bib0037 article-title: Design of a novel 3-DoF parallel kinematic mechanism: type synthesis and kinematic optimization publication-title: Robotica – volume: 6 start-page: 1073 year: 2013 end-page: 1081 ident: bib0038 article-title: Type synthesis of 4-DOF parallel kinematic mechanisms based on Grassmann line geometry and atlas method publication-title: Chin. J. Mech. Eng. – volume: 108 start-page: 75 year: 2017 end-page: 82 ident: bib0017 article-title: A way of relating instantaneous and finite screws based on the screw triangle product publication-title: Mech. Mach. Theory – volume: 8 start-page: 45 year: 1989 end-page: 56 ident: bib0044 article-title: Singular configurations of parallel manipulators and Grassmann geometry publication-title: Int. J. Robot. Res. – volume: 34 start-page: 719 year: 1999 end-page: 730 ident: bib0004 article-title: The lie group of rigid body displacements, a fundamental tool for mechanism design publication-title: Mech. Mach. Theory – year: 2007 ident: bib0025 article-title: Type Synthesis of Parallel Mechanisms – volume: 35 start-page: 638 year: 2011 end-page: 649 ident: bib0033 article-title: Synthesis of precision serial flexure systems using freedom and constraint topologies (FACT) publication-title: Precis. Eng. – year: 2014 ident: bib0035 article-title: Graphical Approach to Creative Design of Mechanical Devices – volume: 30 start-page: 1 year: 2014 end-page: 10 ident: bib0036 article-title: Type synthesis of 2T1R-type parallel kinematic mechanisms and the application in manufacturing publication-title: Robot. Comput. Integr. Manuf. – volume: 78 start-page: 177 year: 2014 end-page: 186 ident: bib0014 article-title: Type synthesis of parallel robotic mechanisms: framework and brief review publication-title: Mech. Mach. Theory – volume: 27 start-page: 79 year: 2009 end-page: 101 ident: bib0010 article-title: Structural synthesis of maximally regular T3R2-type parallel robots via theory of linear transformations and evolutionary morphology publication-title: Robotica – year: 2000 ident: bib0002 article-title: Parallel Robots – volume: 44 start-page: 1980 issue: 10 year: 2009 ident: 10.1016/j.mechmachtheory.2023.105277_bib0005 article-title: Type synthesis of primitive Schoenflies-motion generators publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2009.06.001 – volume: 118 start-page: 84 year: 2017 ident: 10.1016/j.mechmachtheory.2023.105277_bib0028 article-title: Structural synthesis of parallel manipulators with coupling sub-chains publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2017.07.014 – volume: 27 start-page: 79 issue: 1 year: 2009 ident: 10.1016/j.mechmachtheory.2023.105277_bib0010 article-title: Structural synthesis of maximally regular T3R2-type parallel robots via theory of linear transformations and evolutionary morphology publication-title: Robotica doi: 10.1017/S0263574708004542 – volume: 3 issue: 3 year: 2011 ident: 10.1016/j.mechmachtheory.2023.105277_bib0034 article-title: Screw theory based methodology for the deterministic type synthesis of flexure mechanisms publication-title: J. Mech. Robot. doi: 10.1115/1.4004123 – volume: 5 issue: 4 year: 2013 ident: 10.1016/j.mechmachtheory.2023.105277_bib0026 article-title: Type Synthesis of 3-DOF parallel manipulators with both a planar operation mode and a spatial translational operation mode publication-title: J. Mech. Robot. doi: 10.1115/1.4025219 – volume: 24 start-page: 690 issue: 4 year: 2005 ident: 10.1016/j.mechmachtheory.2023.105277_bib0008 article-title: Mobility and spatiality of parallel robots revisited via theory of linear transformations publication-title: Eur. J. Mech. A/Solid. doi: 10.1016/j.euromechsol.2005.02.004 – volume: 34 start-page: 259 issue: 2 year: 2010 ident: 10.1016/j.mechmachtheory.2023.105277_bib0031 article-title: Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT)—Part I: principles publication-title: Precis. Eng. doi: 10.1016/j.precisioneng.2009.06.008 – volume: 25 start-page: 158 issue: 1 year: 2009 ident: 10.1016/j.mechmachtheory.2023.105277_bib0006 article-title: Parallel mechanisms with bifurcation of schoenflies motion publication-title: IEEE Transact. Robot. doi: 10.1109/TRO.2008.2008737 – volume: 77 start-page: 59 year: 2014 ident: 10.1016/j.mechmachtheory.2023.105277_bib0041 article-title: A task-based type synthesis of novel 2T2R parallel mechanisms publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2014.02.007 – year: 2007 ident: 10.1016/j.mechmachtheory.2023.105277_bib0025 – volume: 22 start-page: 59 issue: 1 year: 2003 ident: 10.1016/j.mechmachtheory.2023.105277_bib0022 article-title: Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method publication-title: Int. J. Rob. Res. – volume: 169 year: 2022 ident: 10.1016/j.mechmachtheory.2023.105277_bib0040 article-title: Type synthesis of single-loop deployable mechanisms based on improved atlas method for single-DOF grasping manipulators publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2021.104656 – volume: 78 start-page: 177 issue: 8 year: 2014 ident: 10.1016/j.mechmachtheory.2023.105277_bib0014 article-title: Type synthesis of parallel robotic mechanisms: framework and brief review publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2014.03.008 – volume: 121 start-page: 475 year: 2018 ident: 10.1016/j.mechmachtheory.2023.105277_bib0020 article-title: Type synthesis of 1T2R and 2R1T parallel mechanisms employing conformal geometric algebra publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2017.11.009 – volume: 33 start-page: 622 issue: 3 year: 2015 ident: 10.1016/j.mechmachtheory.2023.105277_bib0037 article-title: Design of a novel 3-DoF parallel kinematic mechanism: type synthesis and kinematic optimization publication-title: Robotica doi: 10.1017/S0263574714000551 – volume: 128 start-page: 412 year: 2018 ident: 10.1016/j.mechmachtheory.2023.105277_bib0016 article-title: Type synthesis of 1T2R parallel mechanisms with parasitic motions publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2018.05.014 – volume: 168 year: 2022 ident: 10.1016/j.mechmachtheory.2023.105277_bib0042 article-title: Type synthesis of reconfiguration parallel mechanisms transforming between trusses and mechanisms based on friction self-locking composite joints publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2021.104597 – volume: 109 start-page: 220 year: 2017 ident: 10.1016/j.mechmachtheory.2023.105277_bib0018 article-title: Type synthesis of parallel mechanisms having 3T1R motion with variable rotational axis publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2016.11.005 – volume: 20 start-page: 312 issue: 4 year: 2001 ident: 10.1016/j.mechmachtheory.2023.105277_bib0045 article-title: Singularity analysis of a three-leg six-degree-of-freedom parallel platform mechanism based on Grassmann Line Geometry publication-title: Int. J. Robot. Res. doi: 10.1177/02783640122067426 – volume: 13 start-page: 437 issue: 4 year: 1978 ident: 10.1016/j.mechmachtheory.2023.105277_bib0003 article-title: Analyse structurelle des mécanismes par groupe des déplacements publication-title: Mech. Mach. Theory doi: 10.1016/0094-114X(78)90017-4 – volume: 33 start-page: 78 issue: 1 year: 2020 ident: 10.1016/j.mechmachtheory.2023.105277_bib0039 article-title: A new method for type synthesis of 2R1T and 2T1R 3-DOF redundant actuated parallel mechanisms with closed loop units publication-title: Chin. J. Mech. Eng. doi: 10.1186/s10033-020-00487-7 – volume: 108 start-page: 75 year: 2017 ident: 10.1016/j.mechmachtheory.2023.105277_bib0017 article-title: A way of relating instantaneous and finite screws based on the screw triangle product publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2016.10.003 – volume: 21 start-page: 131 issue: 2 year: 2002 ident: 10.1016/j.mechmachtheory.2023.105277_bib0021 article-title: General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators publication-title: Int. J. Rob. Res. doi: 10.1177/027836402760475342 – year: 2014 ident: 10.1016/j.mechmachtheory.2023.105277_bib0035 – volume: 131 issue: 2 year: 2009 ident: 10.1016/j.mechmachtheory.2023.105277_bib0012 article-title: Position and orientation characteristic equation for topological design of robot mechanisms publication-title: ASME J. Mech. Des. – volume: 129 start-page: 595 issue: 6 year: 2007 ident: 10.1016/j.mechmachtheory.2023.105277_bib0024 article-title: Type synthesis of parallel mechanisms with multiple operation modes publication-title: ASME J. Mech. Des. doi: 10.1115/1.2717228 – volume: 26 start-page: 242 issue: 2 year: 2007 ident: 10.1016/j.mechmachtheory.2023.105277_bib0009 article-title: Structural synthesis of fully-isotropic parallel robots with Schonflies motions via theory of linear transformations and evolutionary morphology publication-title: Eur. J. Mech. A-Solid. doi: 10.1016/j.euromechsol.2006.06.001 – volume: 21 start-page: 799 issue: 9 year: 2002 ident: 10.1016/j.mechmachtheory.2023.105277_bib0027 article-title: Structure synthesis of a class of 4-DoF and 5-DoF parallel manipulators with identical limb structures publication-title: Int. J. Rob. Res. doi: 10.1177/0278364902021009314 – year: 1999 ident: 10.1016/j.mechmachtheory.2023.105277_bib0030 – year: 2012 ident: 10.1016/j.mechmachtheory.2023.105277_bib0001 – volume: 145 year: 2020 ident: 10.1016/j.mechmachtheory.2023.105277_bib0029 article-title: Type synthesis of a class of novel 3-DOF single-loop parallel leg mechanisms for walking robots publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2019.103695 – volume: 34 start-page: 719 issue: 5 year: 1999 ident: 10.1016/j.mechmachtheory.2023.105277_bib0004 article-title: The lie group of rigid body displacements, a fundamental tool for mechanism design publication-title: Mech. Mach. Theory doi: 10.1016/S0094-114X(98)00051-2 – volume: 8 start-page: 45 issue: 5 year: 1989 ident: 10.1016/j.mechmachtheory.2023.105277_bib0044 article-title: Singular configurations of parallel manipulators and Grassmann geometry publication-title: Int. J. Robot. Res. doi: 10.1177/027836498900800504 – volume: 37 start-page: 1395 issue: 11 year: 2002 ident: 10.1016/j.mechmachtheory.2023.105277_bib0013 article-title: New kinematic structures for 2-, 3-, 4-, and 5-DOF parallel manipulator designs publication-title: Mech. Mach. Theory doi: 10.1016/S0094-114X(02)00044-7 – volume: 35 start-page: 638 issue: 4 year: 2011 ident: 10.1016/j.mechmachtheory.2023.105277_bib0033 article-title: Synthesis of precision serial flexure systems using freedom and constraint topologies (FACT) publication-title: Precis. Eng. doi: 10.1016/j.precisioneng.2011.04.006 – year: 2004 ident: 10.1016/j.mechmachtheory.2023.105277_bib0011 – volume: 23 start-page: 623 issue: 4 year: 2007 ident: 10.1016/j.mechmachtheory.2023.105277_bib0007 article-title: A geometric theory for analysis and synthesis of sub-6 DoF parallel manipulators publication-title: IEEE Transact. Robot. – volume: 6 start-page: 1073 issue: 6 year: 2013 ident: 10.1016/j.mechmachtheory.2023.105277_bib0038 article-title: Type synthesis of 4-DOF parallel kinematic mechanisms based on Grassmann line geometry and atlas method publication-title: Chin. J. Mech. Eng. doi: 10.3901/CJME.2013.06.1073 – year: 2014 ident: 10.1016/j.mechmachtheory.2023.105277_bib0043 – volume: 54 start-page: 998 issue: 4 year: 2011 ident: 10.1016/j.mechmachtheory.2023.105277_bib0023 article-title: Type synthesis of the rotational decoupled parallel mechanism based on screw theory publication-title: Sci. China-Technolog. Sci. doi: 10.1007/s11431-010-4239-2 – volume: 34 start-page: 271 issue: 2 year: 2010 ident: 10.1016/j.mechmachtheory.2023.105277_bib0032 article-title: Synthesis ofmulti-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT)—Part II: practice publication-title: Precis. Eng. doi: 10.1016/j.precisioneng.2009.06.007 – volume: 30 start-page: 1 issue: 1 year: 2014 ident: 10.1016/j.mechmachtheory.2023.105277_bib0036 article-title: Type synthesis of 2T1R-type parallel kinematic mechanisms and the application in manufacturing publication-title: Robot. Comput. Integr. Manuf. doi: 10.1016/j.rcim.2013.07.002 – volume: 3 issue: 1 year: 2011 ident: 10.1016/j.mechmachtheory.2023.105277_bib0015 article-title: Type synthesis of parallel mechanisms having the second class GF sets and two dimensional rotations publication-title: J. Mech. Robot. doi: 10.1115/1.4002697 – year: 2000 ident: 10.1016/j.mechmachtheory.2023.105277_bib0002 – volume: 128 start-page: 544 year: 2018 ident: 10.1016/j.mechmachtheory.2023.105277_bib0019 article-title: Synthesis of a novel type of metamorphic mechanism module for large scale deployable grasping manipulators publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2018.06.017 |
| SSID | ssj0007543 |
| Score | 2.4197803 |
| Snippet | •The type synthesis of SKCs with terminal screw type constraints is investigated.•The adding joint method for designing SKCs with terminal screw type... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 105277 |
| SubjectTerms | Atlas method Constraint-kinematic identification graph Screw type terminal constraint Serial kinematic chain |
| Title | Type synthesis of serial kinematic chains with screw type terminal constraints based on an adding joint method |
| URI | https://dx.doi.org/10.1016/j.mechmachtheory.2023.105277 |
| Volume | 184 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV3dS8MwED_cBNEH8RO_uYe9Vtc2aRd8kCHKVNyTwt5KmiZsc-vETmQv_u1e2kwd-DAQ-tKkScPluPtd-OUOoKGlSCPDAk8HOvRYoFpeKjLjCaVEy2SBViWr8rEbdZ7ZfY_3VuB6fhfG0iqd7a9semmtXcuFk-bF62Bg7_gKRmi-RyC6zOJdg9UgFBGvw2r77qHT_TbIMXfkOcE8O2ANGj80r7FW_bFU_fLe4OzcVhO3tW-DOP7bU_3yPrdbsOlgI7arlW3Dis53YONXMsFdyG1IicUsp38UgwInBiv1whf6qMzMiqovB3mB9vAVyV7oD7RHsOgYMSNUFi3aohHTAq1_y3CSo6Qnsy4OhxPqwaro9B483948XXc8V03BUxSzTD3NY98IXwsjopY0hpAANYWK8dAIxkQWRTLWQTOiCCaVvpChr4OU65DFTUO2KNyHej7J9QFg3GzKyOY45px6uSEMowztdcjjtEXx3yFcziWXKJdq3C5-lMw5ZcNkUe6JlXtSyf0Q-Pfo1yrlxpLjruablCyoUELeYakZjv49wzGs27eKS3YC9enbuz4l1DJNz6B2_umfOd38AqF_8GE |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV1LS8QwEB58gI-D-MT1OQev1d02aTZ4EBFlfZ4U9lbSNGHXR1fsiuzF3-5M2_UBHgShp7waJmHmm_DNDMCeMzqNvQgDF7ooEKFtB6nOfKCt1W2fhc6WrMrrm7hzJy66sjsBJ-NYGKZV1rq_0umltq5bDmppHjz3-xzjqwWh-S6B6DKL9yRMCxkp5vXtv3_xPJSsqXNaBDx8Bva-SF5PzvaejO2VUYOjfa4lzpVvQ6V-t1PfbM_ZIizUoBGPq30twYTLl2H-WyrBFcjZocRilNM_in6BA4_V5cIHGlTmZUXbM_28QH56RdIW7g35ARZrPswjWsaKXDJiWCBbtwwHORr6MjZweD-gHqxKTq_C3dnp7UknqGspBJY8lmHgpGp53XLa67htvCccQE2RJYl5LYTO4tgoFzZj8l9S09ImarkwlS4SqulJE0VrMJUPcrcOqJpNE3OGYympV3pCMNbTSUdSpW3y_hpwOJZcYutE47z5x2TMKLtPfso9YbknldwbID9nP1cJN_4472h8SMmPC5SQbfjTChv_XmEXZju311fJ1fnN5SbMcU_FKtuCqeHLq9sm_DJMd8r7-QGvJPEs |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Type+synthesis+of+serial+kinematic+chains+with+screw+type+terminal+constraints+based+on+an+adding+joint+method&rft.jtitle=Mechanism+and+machine+theory&rft.au=Hu%2C+Bo&rft.au=Bai%2C+Peng&rft.date=2023-06-01&rft.issn=0094-114X&rft.volume=184&rft.spage=105277&rft_id=info:doi/10.1016%2Fj.mechmachtheory.2023.105277&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_mechmachtheory_2023_105277 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0094-114X&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0094-114X&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0094-114X&client=summon |